OfficeVerifier Class

Properties   Methods   Events   Config Settings   Errors  

The OfficeVerifier class is capable of verifying signatures stored in Office documents.

Class Name

SecureBlackbox_OfficeVerifier

Procedural Interface

 secureblackbox_officeverifier_open();
 secureblackbox_officeverifier_close($res);
 secureblackbox_officeverifier_register_callback($res, $id, $function);
 secureblackbox_officeverifier_get_last_error($res);
 secureblackbox_officeverifier_get_last_error_code($res);
 secureblackbox_officeverifier_set($res, $id, $index, $value);
 secureblackbox_officeverifier_get($res, $id, $index);
 secureblackbox_officeverifier_do_close($res, $savechanges);
 secureblackbox_officeverifier_do_config($res, $configurationstring);
 secureblackbox_officeverifier_do_doaction($res, $actionid, $actionparams);
 secureblackbox_officeverifier_do_open($res, $editmode);
 secureblackbox_officeverifier_do_revalidate($res, $index);
 secureblackbox_officeverifier_do_unsign($res, $sigindex);
 secureblackbox_officeverifier_do_verify($res);

Remarks

Use OfficeVerifier to validate electronic signatures made over Office documents.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AllSignaturesValid Property (SecureBlackbox_OfficeVerifier Class)

The cumulative validity of all signatures.

Object Oriented Interface

public function getAllSignaturesValid();

Procedural Interface

secureblackbox_officeverifier_get($res, 1 );

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

Data Type

Boolean

AutoValidateSignatures Property (SecureBlackbox_OfficeVerifier Class)

Specifies whether class should validate any present signatures when the document is opened.

Object Oriented Interface

public function getAutoValidateSignatures();


public function setAutoValidateSignatures($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 2 );


secureblackbox_officeverifier_set($res, 2, $value );

Default Value

true

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.

Data Type

Boolean

BlockedCertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the BlockedCert arrays.

Object Oriented Interface

public function getBlockedCertCount();


public function setBlockedCertCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 3 );


secureblackbox_officeverifier_set($res, 3, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• BlockedCertBytes
• BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getBlockedCertBytes($blockedcertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 4 , $blockedcertindex);

Remarks

Returns the raw certificate data in DER format.

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getBlockedCertHandle($blockedcertindex);


public function setBlockedCertHandle($blockedcertindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 11 , $blockedcertindex);


secureblackbox_officeverifier_set($res, 11, $value , $blockedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the Cert arrays.

Object Oriented Interface

public function getCertCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 38 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• CertBytes
• CertCA
• CertCAKeyID
• CertCRLDistributionPoints
• CertCurve
• CertFingerprint
• CertFriendlyName
• CertHandle
• CertHashAlgorithm
• CertIssuer
• CertIssuerRDN
• CertKeyAlgorithm
• CertKeyBits
• CertKeyFingerprint
• CertKeyUsage
• CertKeyValid
• CertOCSPLocations
• CertPolicyIDs
• CertPublicKeyBytes
• CertSelfSigned
• CertSerialNumber
• CertSigAlgorithm
• CertSubject
• CertSubjectKeyID
• CertSubjectRDN
• CertValidFrom
• CertValidTo

The array indices start at 0 and end at CertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getCertBytes($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 39 , $certindex);

Remarks

Returns the raw certificate data in DER format.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCA Property (SecureBlackbox_OfficeVerifier Class)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Object Oriented Interface

public function getCertCA($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 40 , $certindex);

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertCAKeyID Property (SecureBlackbox_OfficeVerifier Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface

public function getCertCAKeyID($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 41 , $certindex);

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCRLDistributionPoints Property (SecureBlackbox_OfficeVerifier Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Object Oriented Interface

public function getCertCRLDistributionPoints($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 42 , $certindex);

Default Value

''

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertCurve Property (SecureBlackbox_OfficeVerifier Class)

Specifies the elliptic curve of the EC public key.

Object Oriented Interface

public function getCertCurve($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 43 , $certindex);

Default Value

''

Remarks

Specifies the elliptic curve of the EC public key.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertFingerprint Property (SecureBlackbox_OfficeVerifier Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface

public function getCertFingerprint($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 44 , $certindex);

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertFriendlyName Property (SecureBlackbox_OfficeVerifier Class)

Contains an associated alias (friendly name) of the certificate.

Object Oriented Interface

public function getCertFriendlyName($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 45 , $certindex);

Default Value

''

Remarks

Contains an associated alias (friendly name) of the certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getCertHandle($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 46 , $certindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Long64

CertHashAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Object Oriented Interface

public function getCertHashAlgorithm($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 47 , $certindex);

Default Value

''

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuer Property (SecureBlackbox_OfficeVerifier Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface

public function getCertIssuer($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 48 , $certindex);

Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuerRDN Property (SecureBlackbox_OfficeVerifier Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface

public function getCertIssuerRDN($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 49 , $certindex);

Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface

public function getCertKeyAlgorithm($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 50 , $certindex);

Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyBits Property (SecureBlackbox_OfficeVerifier Class)

Returns the length of the public key.

Object Oriented Interface

public function getCertKeyBits($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 51 , $certindex);

Default Value

0

Remarks

Returns the length of the public key.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyFingerprint Property (SecureBlackbox_OfficeVerifier Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface

public function getCertKeyFingerprint($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 52 , $certindex);

Remarks

Returns a fingerprint of the public key contained in the certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertKeyUsage Property (SecureBlackbox_OfficeVerifier Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface

public function getCertKeyUsage($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 53 , $certindex);

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyValid Property (SecureBlackbox_OfficeVerifier Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Object Oriented Interface

public function getCertKeyValid($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 54 , $certindex);

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertOCSPLocations Property (SecureBlackbox_OfficeVerifier Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Object Oriented Interface

public function getCertOCSPLocations($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 55 , $certindex);

Default Value

''

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPolicyIDs Property (SecureBlackbox_OfficeVerifier Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Object Oriented Interface

public function getCertPolicyIDs($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 58 , $certindex);

Default Value

''

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPublicKeyBytes Property (SecureBlackbox_OfficeVerifier Class)

Contains the certificate's public key in DER format.

Object Oriented Interface

public function getCertPublicKeyBytes($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 62 , $certindex);

Remarks

Contains the certificate's public key in DER format.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSelfSigned Property (SecureBlackbox_OfficeVerifier Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface

public function getCertSelfSigned($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 64 , $certindex);

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertSerialNumber Property (SecureBlackbox_OfficeVerifier Class)

Returns the certificate's serial number.

Object Oriented Interface

public function getCertSerialNumber($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 65 , $certindex);

Remarks

Returns the certificate's serial number.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSigAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface

public function getCertSigAlgorithm($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 66 , $certindex);

Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubject Property (SecureBlackbox_OfficeVerifier Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface

public function getCertSubject($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 67 , $certindex);

Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubjectKeyID Property (SecureBlackbox_OfficeVerifier Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface

public function getCertSubjectKeyID($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 69 , $certindex);

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSubjectRDN Property (SecureBlackbox_OfficeVerifier Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface

public function getCertSubjectRDN($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 70 , $certindex);

Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidFrom Property (SecureBlackbox_OfficeVerifier Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface

public function getCertValidFrom($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 71 , $certindex);

Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidTo Property (SecureBlackbox_OfficeVerifier Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface

public function getCertValidTo($certindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 72 , $certindex);

Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

The $certindex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CRLCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the CRL arrays.

Object Oriented Interface

public function getCRLCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 73 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• CRLBytes
• CRLHandle
• CRLIssuer
• CRLIssuerRDN
• CRLLocation
• CRLNextUpdate
• CRLThisUpdate

The array indices start at 0 and end at CRLCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CRLBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw CRL data in DER format.

Object Oriented Interface

public function getCRLBytes($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 74 , $crlindex);

Remarks

Returns the raw CRL data in DER format.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getCRLHandle($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 77 , $crlindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Long64

CRLIssuer Property (SecureBlackbox_OfficeVerifier Class)

The common name of the CRL issuer (CA), typically a company name.

Object Oriented Interface

public function getCRLIssuer($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 78 , $crlindex);

Default Value

''

Remarks

The common name of the CRL issuer (CA), typically a company name.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLIssuerRDN Property (SecureBlackbox_OfficeVerifier Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Object Oriented Interface

public function getCRLIssuerRDN($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 79 , $crlindex);

Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLLocation Property (SecureBlackbox_OfficeVerifier Class)

The URL that the CRL was downloaded from.

Object Oriented Interface

public function getCRLLocation($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 80 , $crlindex);

Default Value

''

Remarks

The URL that the CRL was downloaded from.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLNextUpdate Property (SecureBlackbox_OfficeVerifier Class)

The planned time and date of the next version of this CRL to be published.

Object Oriented Interface

public function getCRLNextUpdate($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 81 , $crlindex);

Default Value

''

Remarks

The planned time and date of the next version of this CRL to be published.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLThisUpdate Property (SecureBlackbox_OfficeVerifier Class)

The date and time at which this version of the CRL was published.

Object Oriented Interface

public function getCRLThisUpdate($crlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 84 , $crlindex);

Default Value

''

Remarks

The date and time at which this version of the CRL was published.

The $crlindex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

DocumentFormat Property (SecureBlackbox_OfficeVerifier Class)

Defines the format of the Office document.

Object Oriented Interface

public function getDocumentFormat();

Procedural Interface

secureblackbox_officeverifier_get($res, 85 );

Default Value

0

Remarks

This property contains the Office document format.

This property is read-only and not available at design time.

Data Type

Integer

DocumentType Property (SecureBlackbox_OfficeVerifier Class)

Defines the type of the Office document.

Object Oriented Interface

public function getDocumentType();

Procedural Interface

secureblackbox_officeverifier_get($res, 86 );

Default Value

''

Remarks

This property contains the Office document type.

This property is read-only and not available at design time.

Data Type

String

FIPSMode Property (SecureBlackbox_OfficeVerifier Class)

Reserved.

Object Oriented Interface

public function getFIPSMode();


public function setFIPSMode($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 87 );


secureblackbox_officeverifier_set($res, 87, $value );

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

IgnoreChainValidationErrors Property (SecureBlackbox_OfficeVerifier Class)

Makes the class tolerant to chain validation errors.

Object Oriented Interface

public function getIgnoreChainValidationErrors();


public function setIgnoreChainValidationErrors($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 88 );


secureblackbox_officeverifier_set($res, 88, $value );

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (SecureBlackbox_OfficeVerifier Class)

Use this property to pass the input to class in byte array form.

Object Oriented Interface

public function getInputBytes();


public function setInputBytes($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 89 );


secureblackbox_officeverifier_set($res, 89, $value );

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (SecureBlackbox_OfficeVerifier Class)

The path to the signed office document.

Object Oriented Interface

public function getInputFile();


public function setInputFile($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 90 );


secureblackbox_officeverifier_set($res, 90, $value );

Default Value

''

Remarks

Use this property to provide the path to the document which you would like to verify.

Data Type

String

KnownCertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the KnownCert arrays.

Object Oriented Interface

public function getKnownCertCount();


public function setKnownCertCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 91 );


secureblackbox_officeverifier_set($res, 91, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCertBytes
• KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getKnownCertBytes($knowncertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 92 , $knowncertindex);

Remarks

Returns the raw certificate data in DER format.

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getKnownCertHandle($knowncertindex);


public function setKnownCertHandle($knowncertindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 99 , $knowncertindex);


secureblackbox_officeverifier_set($res, 99, $value , $knowncertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the KnownCRL arrays.

Object Oriented Interface

public function getKnownCRLCount();


public function setKnownCRLCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 126 );


secureblackbox_officeverifier_set($res, 126, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCRLBytes
• KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw CRL data in DER format.

Object Oriented Interface

public function getKnownCRLBytes($knowncrlindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 127 , $knowncrlindex);

Remarks

Returns the raw CRL data in DER format.

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getKnownCRLHandle($knowncrlindex);


public function setKnownCRLHandle($knowncrlindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 130 , $knowncrlindex);


secureblackbox_officeverifier_set($res, 130, $value , $knowncrlindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the KnownOCSP arrays.

Object Oriented Interface

public function getKnownOCSPCount();


public function setKnownOCSPCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 138 );


secureblackbox_officeverifier_set($res, 138, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownOCSPBytes
• KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (SecureBlackbox_OfficeVerifier Class)

A buffer containing the raw OCSP response data.

Object Oriented Interface

public function getKnownOCSPBytes($knownocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 139 , $knownocspindex);

Remarks

A buffer containing the raw OCSP response data.

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getKnownOCSPHandle($knownocspindex);


public function setKnownOCSPHandle($knownocspindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 141 , $knownocspindex);


secureblackbox_officeverifier_set($res, 141, $value , $knownocspindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OCSPCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the OCSP arrays.

Object Oriented Interface

public function getOCSPCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 146 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• OCSPBytes
• OCSPHandle
• OCSPIssuer
• OCSPIssuerRDN
• OCSPLocation
• OCSPProducedAt

The array indices start at 0 and end at OCSPCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OCSPBytes Property (SecureBlackbox_OfficeVerifier Class)

A buffer containing the raw OCSP response data.

Object Oriented Interface

public function getOCSPBytes($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 147 , $ocspindex);

Remarks

A buffer containing the raw OCSP response data.

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OCSPHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getOCSPHandle($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 149 , $ocspindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Long64

OCSPIssuer Property (SecureBlackbox_OfficeVerifier Class)

Indicates the issuer of this response (a CA or its authorized representative).

Object Oriented Interface

public function getOCSPIssuer($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 150 , $ocspindex);

Default Value

''

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPIssuerRDN Property (SecureBlackbox_OfficeVerifier Class)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Object Oriented Interface

public function getOCSPIssuerRDN($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 151 , $ocspindex);

Default Value

''

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPLocation Property (SecureBlackbox_OfficeVerifier Class)

The location of the OCSP responder.

Object Oriented Interface

public function getOCSPLocation($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 152 , $ocspindex);

Default Value

''

Remarks

The location of the OCSP responder.

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPProducedAt Property (SecureBlackbox_OfficeVerifier Class)

Specifies the time when the response was produced, in UTC.

Object Oriented Interface

public function getOCSPProducedAt($ocspindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 153 , $ocspindex);

Default Value

''

Remarks

Specifies the time when the response was produced, in UTC.

The $ocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OfflineMode Property (SecureBlackbox_OfficeVerifier Class)

Switches the class to offline mode.

Object Oriented Interface

public function getOfflineMode();


public function setOfflineMode($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 154 );


secureblackbox_officeverifier_set($res, 154, $value );

Default Value

false

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

OutputBytes Property (SecureBlackbox_OfficeVerifier Class)

Use this property to read the output the class object has produced.

Object Oriented Interface

public function getOutputBytes();

Procedural Interface

secureblackbox_officeverifier_get($res, 155 );

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (SecureBlackbox_OfficeVerifier Class)

Defines where to save the modified signed document.

Object Oriented Interface

public function getOutputFile();


public function setOutputFile($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 156 );


secureblackbox_officeverifier_set($res, 156, $value );

Default Value

''

Remarks

Specifies the path where the modified signed Office document should be saved.

Data Type

String

Profile Property (SecureBlackbox_OfficeVerifier Class)

Specifies a pre-defined profile to apply when creating the signature.

Object Oriented Interface

public function getProfile();


public function setProfile($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 157 );


secureblackbox_officeverifier_set($res, 157, $value );

Default Value

''

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (SecureBlackbox_OfficeVerifier Class)

The IP address of the proxy server.

Object Oriented Interface

public function getProxyAddress();


public function setProxyAddress($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 158 );


secureblackbox_officeverifier_set($res, 158, $value );

Default Value

''

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (SecureBlackbox_OfficeVerifier Class)

The authentication type used by the proxy server.

Object Oriented Interface

public function getProxyAuthentication();


public function setProxyAuthentication($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 159 );


secureblackbox_officeverifier_set($res, 159, $value );

Default Value

0

Remarks

The authentication type used by the proxy server.

Data Type

Integer

ProxyPassword Property (SecureBlackbox_OfficeVerifier Class)

The password to authenticate to the proxy server.

Object Oriented Interface

public function getProxyPassword();


public function setProxyPassword($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 160 );


secureblackbox_officeverifier_set($res, 160, $value );

Default Value

''

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (SecureBlackbox_OfficeVerifier Class)

The port on the proxy server to connect to.

Object Oriented Interface

public function getProxyPort();


public function setProxyPort($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 161 );


secureblackbox_officeverifier_set($res, 161, $value );

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (SecureBlackbox_OfficeVerifier Class)

The type of the proxy server.

Object Oriented Interface

public function getProxyProxyType();


public function setProxyProxyType($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 162 );


secureblackbox_officeverifier_set($res, 162, $value );

Default Value

0

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

Data Type

Integer

ProxyRequestHeaders Property (SecureBlackbox_OfficeVerifier Class)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Object Oriented Interface

public function getProxyRequestHeaders();


public function setProxyRequestHeaders($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 163 );


secureblackbox_officeverifier_set($res, 163, $value );

Default Value

''

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (SecureBlackbox_OfficeVerifier Class)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Object Oriented Interface

public function getProxyResponseBody();


public function setProxyResponseBody($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 164 );


secureblackbox_officeverifier_set($res, 164, $value );

Default Value

''

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (SecureBlackbox_OfficeVerifier Class)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Object Oriented Interface

public function getProxyResponseHeaders();


public function setProxyResponseHeaders($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 165 );


secureblackbox_officeverifier_set($res, 165, $value );

Default Value

''

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (SecureBlackbox_OfficeVerifier Class)

Specifies whether IPv6 should be used when connecting through the proxy.

Object Oriented Interface

public function getProxyUseIPv6();


public function setProxyUseIPv6($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 166 );


secureblackbox_officeverifier_set($res, 166, $value );

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (SecureBlackbox_OfficeVerifier Class)

Enables or disables proxy-driven connection.

Object Oriented Interface

public function getProxyUseProxy();


public function setProxyUseProxy($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 167 );


secureblackbox_officeverifier_set($res, 167, $value );

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (SecureBlackbox_OfficeVerifier Class)

Specifies the username credential for proxy authentication.

Object Oriented Interface

public function getProxyUsername();


public function setProxyUsername($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 168 );


secureblackbox_officeverifier_set($res, 168, $value );

Default Value

''

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RevocationCheck Property (SecureBlackbox_OfficeVerifier Class)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Object Oriented Interface

public function getRevocationCheck();


public function setRevocationCheck($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 169 );


secureblackbox_officeverifier_set($res, 169, $value );

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SignatureCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the Signature arrays.

Object Oriented Interface

public function getSignatureCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 170 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignatureCertificateIndex
• SignatureChainValidationDetails
• SignatureChainValidationResult
• SignatureClaimedSigningTime
• SignatureCorePropertiesSigned
• SignatureDocumentSigned
• SignatureExpireTime
• SignatureHandle
• SignatureHashAlgorithm
• SignatureIssuerRDN
• SignatureLastArchivalTime
• SignaturePolicyHash
• SignaturePolicyHashAlgorithm
• SignaturePolicyID
• SignaturePolicyURI
• SignatureSerialNumber
• SignatureSignatureBytes
• SignatureSignatureInfoComments
• SignatureSignatureInfoText
• SignatureSignatureOriginSigned
• SignatureSignatureType
• SignatureSignatureValidationResult
• SignatureSubjectKeyID
• SignatureSubjectRDN
• SignatureTimestamped
• SignatureValidatedSigningTime
• SignatureValidationLog
• SignatureXAdES
• SignatureXAdESForm
• SignatureXAdESVersion

The array indices start at 0 and end at SignatureCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignatureCertificateIndex Property (SecureBlackbox_OfficeVerifier Class)

Returns the index of the signing certificate in the Certificates collection Use this property to look up the signing certificate in the Certificates collection.

Object Oriented Interface

public function getSignatureCertificateIndex($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 171 , $signatureindex);

Default Value

-1

Remarks

Returns the index of the signing certificate in the Certificates collection

Use this property to look up the signing certificate in the Certificates collection.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationDetails Property (SecureBlackbox_OfficeVerifier Class)

The details of a certificate chain validation outcome.

Object Oriented Interface

public function getSignatureChainValidationDetails($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 172 , $signatureindex);

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationResult Property (SecureBlackbox_OfficeVerifier Class)

The outcome of a certificate chain validation routine.

Object Oriented Interface

public function getSignatureChainValidationResult($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 173 , $signatureindex);

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureClaimedSigningTime Property (SecureBlackbox_OfficeVerifier Class)

The signing time from the signer's computer.

Object Oriented Interface

public function getSignatureClaimedSigningTime($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 174 , $signatureindex);

Default Value

''

Remarks

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureCorePropertiesSigned Property (SecureBlackbox_OfficeVerifier Class)

Returns True if this signature covers the core properties of the document.

Object Oriented Interface

public function getSignatureCorePropertiesSigned($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 175 , $signatureindex);

Default Value

false

Remarks

Returns True if this signature covers the core properties of the document.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureDocumentSigned Property (SecureBlackbox_OfficeVerifier Class)

Returns True if the signature covers the document itself.

Object Oriented Interface

public function getSignatureDocumentSigned($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 176 , $signatureindex);

Default Value

false

Remarks

Returns True if the signature covers the document itself.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureExpireTime Property (SecureBlackbox_OfficeVerifier Class)

Specifies the signature expiration time in UTC.

Object Oriented Interface

public function getSignatureExpireTime($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 177 , $signatureindex);

Default Value

''

Remarks

Specifies the signature expiration time in UTC.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getSignatureHandle($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 178 , $signatureindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Long64

SignatureHashAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

The hash algorithm used for signing.

Object Oriented Interface

public function getSignatureHashAlgorithm($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 179 , $signatureindex);

Default Value

'Unknown'

Remarks

The hash algorithm used for signing.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureIssuerRDN Property (SecureBlackbox_OfficeVerifier Class)

The Relative Distinguished Name of the signing certificate's issuer.

Object Oriented Interface

public function getSignatureIssuerRDN($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 180 , $signatureindex);

Default Value

''

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureLastArchivalTime Property (SecureBlackbox_OfficeVerifier Class)

Indicates the most recent archival time of an archived signature This property returns the time of the most recent archival timestamp applied to the signature.

Object Oriented Interface

public function getSignatureLastArchivalTime($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 181 , $signatureindex);

Default Value

''

Remarks

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHash Property (SecureBlackbox_OfficeVerifier Class)

The signature policy hash value.

Object Oriented Interface

public function getSignaturePolicyHash($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 182 , $signatureindex);

Default Value

''

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHashAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Object Oriented Interface

public function getSignaturePolicyHashAlgorithm($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 183 , $signatureindex);

Default Value

''

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from SignaturePolicyHash.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyID Property (SecureBlackbox_OfficeVerifier Class)

The policy ID that was included or to be included into the signature.

Object Oriented Interface

public function getSignaturePolicyID($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 184 , $signatureindex);

Default Value

''

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyURI Property (SecureBlackbox_OfficeVerifier Class)

The signature policy URI that was included in the signature.

Object Oriented Interface

public function getSignaturePolicyURI($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 185 , $signatureindex);

Default Value

''

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSerialNumber Property (SecureBlackbox_OfficeVerifier Class)

The serial number of the timestamp.

Object Oriented Interface

public function getSignatureSerialNumber($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 186 , $signatureindex);

Remarks

The serial number of the timestamp.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the binary representation of the Office signature.

Object Oriented Interface

public function getSignatureSignatureBytes($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 187 , $signatureindex);

Remarks

Returns the binary representation of the Office signature.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureInfoComments Property (SecureBlackbox_OfficeVerifier Class)

Contains the comments for the SignatureInfoText.

Object Oriented Interface

public function getSignatureSignatureInfoComments($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 188 , $signatureindex);

Default Value

''

Remarks

Contains the comments for the SignatureInfoText.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSignatureInfoText Property (SecureBlackbox_OfficeVerifier Class)

Contains the text of the signature info.

Object Oriented Interface

public function getSignatureSignatureInfoText($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 189 , $signatureindex);

Default Value

''

Remarks

Contains the text of the signature info.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSignatureOriginSigned Property (SecureBlackbox_OfficeVerifier Class)

Returns True if the signature origin is signed.

Object Oriented Interface

public function getSignatureSignatureOriginSigned($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 190 , $signatureindex);

Default Value

false

Remarks

Returns True if the signature origin is signed.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureSignatureType Property (SecureBlackbox_OfficeVerifier Class)

Specifies the type of this signature.

Object Oriented Interface

public function getSignatureSignatureType($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 191 , $signatureindex);

Default Value

0

Remarks

Specifies the type of this signature.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSignatureValidationResult Property (SecureBlackbox_OfficeVerifier Class)

The outcome of the cryptographic signature validation.

Object Oriented Interface

public function getSignatureSignatureValidationResult($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 192 , $signatureindex);

Default Value

0

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSubjectKeyID Property (SecureBlackbox_OfficeVerifier Class)

Contains the subject key identifier of the signing certificate.

Object Oriented Interface

public function getSignatureSubjectKeyID($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 193 , $signatureindex);

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSubjectRDN Property (SecureBlackbox_OfficeVerifier Class)

Contains information about the person owning the signing certificate.

Object Oriented Interface

public function getSignatureSubjectRDN($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 194 , $signatureindex);

Default Value

''

Remarks

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureTimestamped Property (SecureBlackbox_OfficeVerifier Class)

Use this property to establish whether the signature contains an embedded timestamp.

Object Oriented Interface

public function getSignatureTimestamped($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 195 , $signatureindex);

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureValidatedSigningTime Property (SecureBlackbox_OfficeVerifier Class)

Contains the certified signing time.

Object Oriented Interface

public function getSignatureValidatedSigningTime($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 196 , $signatureindex);

Default Value

''

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SignatureClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationLog Property (SecureBlackbox_OfficeVerifier Class)

Contains the complete log of the certificate validation routine.

Object Oriented Interface

public function getSignatureValidationLog($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 197 , $signatureindex);

Default Value

''

Remarks

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureXAdES Property (SecureBlackbox_OfficeVerifier Class)

Specifies whether the document contains an advanced signature (XAdES).

Object Oriented Interface

public function getSignatureXAdES($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 198 , $signatureindex);

Default Value

true

Remarks

Specifies whether the document contains an advanced signature (XAdES).

Use this property to check whether the document is signed with XAdES or XML-DSIG only.

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureXAdESForm Property (SecureBlackbox_OfficeVerifier Class)

Specifies which form of XAdES should be produced.

Object Oriented Interface

public function getSignatureXAdESForm($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 199 , $signatureindex);

Default Value

0

Remarks

Specifies which form of XAdES should be produced.

Use this property to specify the form (level) of advanced electronic signature to be produced.

The supported forms are:

* XAdES-E-* forms are supported starting from XAdES v1.3.2

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureXAdESVersion Property (SecureBlackbox_OfficeVerifier Class)

Specifies XAdES version.

Object Oriented Interface

public function getSignatureXAdESVersion($signatureindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 200 , $signatureindex);

Default Value

3

Remarks

Specifies XAdES version.

This property specifies the version of the XAdES specification the signature should comply with. For the form of XAdES, use XAdESForm.

The supported vesions are:

The $signatureindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignedPartCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the SignedPart arrays.

Object Oriented Interface

public function getSignedPartCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 201 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignedPartContentType
• SignedPartHashAlgorithm
• SignedPartIsRelationshipPart
• SignedPartPath
• SignedPartSignatureIndex
• SignedPartValidationResult

The array indices start at 0 and end at SignedPartCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignedPartContentType Property (SecureBlackbox_OfficeVerifier Class)

Specifies the content type of this signed part.

Object Oriented Interface

public function getSignedPartContentType($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 202 , $signedpartindex);

Default Value

''

Remarks

Specifies the content type of this signed part.

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

String

SignedPartHashAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

The hash algorithm used for signing.

Object Oriented Interface

public function getSignedPartHashAlgorithm($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 203 , $signedpartindex);

Default Value

'Unknown'

Remarks

The hash algorithm used for signing.

The hash algorithm used for signing.

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

String

SignedPartIsRelationshipPart Property (SecureBlackbox_OfficeVerifier Class)

Specifies whether this signed part is a relationship part.

Object Oriented Interface

public function getSignedPartIsRelationshipPart($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 204 , $signedpartindex);

Default Value

false

Remarks

Specifies whether this signed part is a relationship part.

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignedPartPath Property (SecureBlackbox_OfficeVerifier Class)

The path to this signed part in the document package.

Object Oriented Interface

public function getSignedPartPath($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 205 , $signedpartindex);

Default Value

''

Remarks

The path to this signed part in the document package.

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

String

SignedPartSignatureIndex Property (SecureBlackbox_OfficeVerifier Class)

Returns the index of the owner signature, if applicable.

Object Oriented Interface

public function getSignedPartSignatureIndex($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 206 , $signedpartindex);

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignedPartValidationResult Property (SecureBlackbox_OfficeVerifier Class)

The outcome of the cryptographic signature validation.

Object Oriented Interface

public function getSignedPartValidationResult($signedpartindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 207 , $signedpartindex);

Default Value

0

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The $signedpartindex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedPartCount property.

This property is read-only and not available at design time.

Data Type

Integer

SocketDNSMode Property (SecureBlackbox_OfficeVerifier Class)

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Object Oriented Interface

public function getSocketDNSMode();


public function setSocketDNSMode($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 208 );


secureblackbox_officeverifier_set($res, 208, $value );

Default Value

0

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Data Type

Integer

SocketDNSPort Property (SecureBlackbox_OfficeVerifier Class)

Specifies the port number to be used for sending queries to the DNS server.

Object Oriented Interface

public function getSocketDNSPort();


public function setSocketDNSPort($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 209 );


secureblackbox_officeverifier_set($res, 209, $value );

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (SecureBlackbox_OfficeVerifier Class)

The timeout (in milliseconds) for each DNS query.

Object Oriented Interface

public function getSocketDNSQueryTimeout();


public function setSocketDNSQueryTimeout($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 210 );


secureblackbox_officeverifier_set($res, 210, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (SecureBlackbox_OfficeVerifier Class)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Object Oriented Interface

public function getSocketDNSServers();


public function setSocketDNSServers($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 211 );


secureblackbox_officeverifier_set($res, 211, $value );

Default Value

''

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (SecureBlackbox_OfficeVerifier Class)

The timeout (in milliseconds) for the whole resolution process.

Object Oriented Interface

public function getSocketDNSTotalTimeout();


public function setSocketDNSTotalTimeout($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 212 );


secureblackbox_officeverifier_set($res, 212, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (SecureBlackbox_OfficeVerifier Class)

The maximum number of bytes to read from the socket, per second.

Object Oriented Interface

public function getSocketIncomingSpeedLimit();


public function setSocketIncomingSpeedLimit($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 213 );


secureblackbox_officeverifier_set($res, 213, $value );

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (SecureBlackbox_OfficeVerifier Class)

The local network interface to bind the socket to.

Object Oriented Interface

public function getSocketLocalAddress();


public function setSocketLocalAddress($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 214 );


secureblackbox_officeverifier_set($res, 214, $value );

Default Value

''

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (SecureBlackbox_OfficeVerifier Class)

The local port number to bind the socket to.

Object Oriented Interface

public function getSocketLocalPort();


public function setSocketLocalPort($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 215 );


secureblackbox_officeverifier_set($res, 215, $value );

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (SecureBlackbox_OfficeVerifier Class)

The maximum number of bytes to write to the socket, per second.

Object Oriented Interface

public function getSocketOutgoingSpeedLimit();


public function setSocketOutgoingSpeedLimit($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 216 );


secureblackbox_officeverifier_set($res, 216, $value );

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (SecureBlackbox_OfficeVerifier Class)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Object Oriented Interface

public function getSocketTimeout();


public function setSocketTimeout($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 217 );


secureblackbox_officeverifier_set($res, 217, $value );

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (SecureBlackbox_OfficeVerifier Class)

Enables or disables IP protocol version 6.

Object Oriented Interface

public function getSocketUseIPv6();


public function setSocketUseIPv6($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 218 );


secureblackbox_officeverifier_set($res, 218, $value );

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TimestampCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the Timestamp arrays.

Object Oriented Interface

public function getTimestampCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 219 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• TimestampAccuracy
• TimestampBytes
• TimestampCertificateIndex
• TimestampChainValidationDetails
• TimestampChainValidationResult
• TimestampHashAlgorithm
• TimestampSerialNumber
• TimestampSignatureIndex
• TimestampTime
• TimestampTimestampType
• TimestampTSAName
• TimestampValidationLog
• TimestampValidationResult

The array indices start at 0 and end at TimestampCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TimestampAccuracy Property (SecureBlackbox_OfficeVerifier Class)

This property indicates the accuracy of the included time mark, in microseconds.

Object Oriented Interface

public function getTimestampAccuracy($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 220 , $timestampindex);

Default Value

0

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Long64

TimestampBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw timestamp data in DER format.

Object Oriented Interface

public function getTimestampBytes($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 221 , $timestampindex);

Remarks

Returns the raw timestamp data in DER format.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampCertificateIndex Property (SecureBlackbox_OfficeVerifier Class)

Returns the index of the TSA certificate in the Certificates collection.

Object Oriented Interface

public function getTimestampCertificateIndex($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 222 , $timestampindex);

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationDetails Property (SecureBlackbox_OfficeVerifier Class)

The details of a certificate chain validation outcome.

Object Oriented Interface

public function getTimestampChainValidationDetails($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 223 , $timestampindex);

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationResult Property (SecureBlackbox_OfficeVerifier Class)

The outcome of a certificate chain validation routine.

Object Oriented Interface

public function getTimestampChainValidationResult($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 224 , $timestampindex);

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampHashAlgorithm Property (SecureBlackbox_OfficeVerifier Class)

Returns the timestamp's hash algorithm.

Object Oriented Interface

public function getTimestampHashAlgorithm($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 225 , $timestampindex);

Default Value

''

Remarks

Returns the timestamp's hash algorithm.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampSerialNumber Property (SecureBlackbox_OfficeVerifier Class)

Returns the timestamp's serial number.

Object Oriented Interface

public function getTimestampSerialNumber($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 226 , $timestampindex);

Remarks

Returns the timestamp's serial number.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampSignatureIndex Property (SecureBlackbox_OfficeVerifier Class)

Returns the index of the owner signature, if applicable.

Object Oriented Interface

public function getTimestampSignatureIndex($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 227 , $timestampindex);

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTime Property (SecureBlackbox_OfficeVerifier Class)

The time point incorporated into the timestamp.

Object Oriented Interface

public function getTimestampTime($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 228 , $timestampindex);

Default Value

''

Remarks

The time point incorporated into the timestamp.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampTimestampType Property (SecureBlackbox_OfficeVerifier Class)

Returns the type of the timestamp.

Object Oriented Interface

public function getTimestampTimestampType($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 229 , $timestampindex);

Default Value

0

Remarks

Returns the type of the timestamp.

Available options:

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTSAName Property (SecureBlackbox_OfficeVerifier Class)

This value uniquely identifies the Timestamp Authority (TSA).

Object Oriented Interface

public function getTimestampTSAName($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 230 , $timestampindex);

Default Value

''

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationLog Property (SecureBlackbox_OfficeVerifier Class)

Contains the TSA certificate chain validation log.

Object Oriented Interface

public function getTimestampValidationLog($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 231 , $timestampindex);

Default Value

''

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationResult Property (SecureBlackbox_OfficeVerifier Class)

Contains the timestamp validation outcome.

Object Oriented Interface

public function getTimestampValidationResult($timestampindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 232 , $timestampindex);

Default Value

0

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

The $timestampindex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TLSClientCertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the TLSClientCert arrays.

Object Oriented Interface

public function getTLSClientCertCount();


public function setTLSClientCertCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 233 );


secureblackbox_officeverifier_set($res, 233, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSClientCertBytes
• TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getTLSClientCertBytes($tlsclientcertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 234 , $tlsclientcertindex);

Remarks

Returns the raw certificate data in DER format.

The $tlsclientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getTLSClientCertHandle($tlsclientcertindex);


public function setTLSClientCertHandle($tlsclientcertindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 241 , $tlsclientcertindex);


secureblackbox_officeverifier_set($res, 241, $value , $tlsclientcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $tlsclientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the TLSServerCert arrays.

Object Oriented Interface

public function getTLSServerCertCount();

Procedural Interface

secureblackbox_officeverifier_get($res, 268 );

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSServerCertBytes
• TLSServerCertHandle

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getTLSServerCertBytes($tlsservercertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 269 , $tlsservercertindex);

Remarks

Returns the raw certificate data in DER format.

The $tlsservercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getTLSServerCertHandle($tlsservercertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 276 , $tlsservercertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $tlsservercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSAutoValidateCertificates Property (SecureBlackbox_OfficeVerifier Class)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Object Oriented Interface

public function getTLSAutoValidateCertificates();


public function setTLSAutoValidateCertificates($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 303 );


secureblackbox_officeverifier_set($res, 303, $value );

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (SecureBlackbox_OfficeVerifier Class)

Selects the base configuration for the TLS settings.

Object Oriented Interface

public function getTLSBaseConfiguration();


public function setTLSBaseConfiguration($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 304 );


secureblackbox_officeverifier_set($res, 304, $value );

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (SecureBlackbox_OfficeVerifier Class)

A list of ciphersuites separated with commas or semicolons.

Object Oriented Interface

public function getTLSCiphersuites();


public function setTLSCiphersuites($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 305 );


secureblackbox_officeverifier_set($res, 305, $value );

Default Value

''

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (SecureBlackbox_OfficeVerifier Class)

Defines the elliptic curves to enable.

Object Oriented Interface

public function getTLSECCurves();


public function setTLSECCurves($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 306 );


secureblackbox_officeverifier_set($res, 306, $value );

Default Value

''

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (SecureBlackbox_OfficeVerifier Class)

Provides access to TLS extensions.

Object Oriented Interface

public function getTLSExtensions();


public function setTLSExtensions($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 307 );


secureblackbox_officeverifier_set($res, 307, $value );

Default Value

''

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (SecureBlackbox_OfficeVerifier Class)

Whether to force TLS session resumption when the destination address changes.

Object Oriented Interface

public function getTLSForceResumeIfDestinationChanges();


public function setTLSForceResumeIfDestinationChanges($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 308 );


secureblackbox_officeverifier_set($res, 308, $value );

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (SecureBlackbox_OfficeVerifier Class)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Object Oriented Interface

public function getTLSPreSharedIdentity();


public function setTLSPreSharedIdentity($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 309 );


secureblackbox_officeverifier_set($res, 309, $value );

Default Value

''

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (SecureBlackbox_OfficeVerifier Class)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Object Oriented Interface

public function getTLSPreSharedKey();


public function setTLSPreSharedKey($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 310 );


secureblackbox_officeverifier_set($res, 310, $value );

Default Value

''

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (SecureBlackbox_OfficeVerifier Class)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Object Oriented Interface

public function getTLSPreSharedKeyCiphersuite();


public function setTLSPreSharedKeyCiphersuite($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 311 );


secureblackbox_officeverifier_set($res, 311, $value );

Default Value

''

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (SecureBlackbox_OfficeVerifier Class)

Selects the renegotiation attack prevention mechanism.

Object Oriented Interface

public function getTLSRenegotiationAttackPreventionMode();


public function setTLSRenegotiationAttackPreventionMode($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 312 );


secureblackbox_officeverifier_set($res, 312, $value );

Default Value

0

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (SecureBlackbox_OfficeVerifier Class)

Specifies the kind(s) of revocation check to perform.

Object Oriented Interface

public function getTLSRevocationCheck();


public function setTLSRevocationCheck($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 313 );


secureblackbox_officeverifier_set($res, 313, $value );

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (SecureBlackbox_OfficeVerifier Class)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Object Oriented Interface

public function getTLSSSLOptions();


public function setTLSSSLOptions($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 314 );


secureblackbox_officeverifier_set($res, 314, $value );

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (SecureBlackbox_OfficeVerifier Class)

Specifies the TLS mode to use.

Object Oriented Interface

public function getTLSTLSMode();


public function setTLSTLSMode($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 315 );


secureblackbox_officeverifier_set($res, 315, $value );

Default Value

0

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (SecureBlackbox_OfficeVerifier Class)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Object Oriented Interface

public function getTLSUseExtendedMasterSecret();


public function setTLSUseExtendedMasterSecret($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 316 );


secureblackbox_officeverifier_set($res, 316, $value );

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (SecureBlackbox_OfficeVerifier Class)

Enables or disables the TLS session resumption capability.

Object Oriented Interface

public function getTLSUseSessionResumption();


public function setTLSUseSessionResumption($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 317 );


secureblackbox_officeverifier_set($res, 317, $value );

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (SecureBlackbox_OfficeVerifier Class)

The SSL/TLS versions to enable by default.

Object Oriented Interface

public function getTLSVersions();


public function setTLSVersions($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 318 );


secureblackbox_officeverifier_set($res, 318, $value );

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

TrustedCertCount Property (SecureBlackbox_OfficeVerifier Class)

The number of records in the TrustedCert arrays.

Object Oriented Interface

public function getTrustedCertCount();


public function setTrustedCertCount($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 319 );


secureblackbox_officeverifier_set($res, 319, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

• TrustedCertBytes
• TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (SecureBlackbox_OfficeVerifier Class)

Returns the raw certificate data in DER format.

Object Oriented Interface

public function getTrustedCertBytes($trustedcertindex);

Procedural Interface

secureblackbox_officeverifier_get($res, 320 , $trustedcertindex);

Remarks

Returns the raw certificate data in DER format.

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (SecureBlackbox_OfficeVerifier Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface

public function getTrustedCertHandle($trustedcertindex);


public function setTrustedCertHandle($trustedcertindex, $value);

Procedural Interface

secureblackbox_officeverifier_get($res, 327 , $trustedcertindex);


secureblackbox_officeverifier_set($res, 327, $value , $trustedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

ValidationMoment Property (SecureBlackbox_OfficeVerifier Class)

Specifies the validation moment.

Object Oriented Interface

public function getValidationMoment();


public function setValidationMoment($value);

Procedural Interface

secureblackbox_officeverifier_get($res, 354 );


secureblackbox_officeverifier_set($res, 354, $value );

Default Value

''

Remarks

Use this property to specify the time for which the signature validation is performed. The time is in UTC.

Data Type

String

Close Method (SecureBlackbox_OfficeVerifier Class)

Closes an opened document.

Object Oriented Interface

public function doClose($savechanges);

Procedural Interface

secureblackbox_officeverifier_do_close($res, $savechanges);

Remarks

Use this method to close a previously opened document. Set SaveChanges to true to apply any changes made.

Config Method (SecureBlackbox_OfficeVerifier Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

secureblackbox_officeverifier_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (SecureBlackbox_OfficeVerifier Class)

Performs an additional action.

Object Oriented Interface

public function doDoAction($actionid, $actionparams);

Procedural Interface

secureblackbox_officeverifier_do_doaction($res, $actionid, $actionparams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Open Method (SecureBlackbox_OfficeVerifier Class)

Opens a document for verifying or removing signatures.

Object Oriented Interface

public function doOpen($editmode);

Procedural Interface

secureblackbox_officeverifier_do_open($res, $editmode);

Remarks

Use this method to open a document for verifying or removing signatures. When finished, call Close to complete or discard the operation.

Set EditMode to true to open the document in edit mode (only useful if you intend to remove signatures).

Revalidate Method (SecureBlackbox_OfficeVerifier Class)

Revalidates a signature in accordance with current settings.

Object Oriented Interface

public function doRevalidate($index);

Procedural Interface

secureblackbox_officeverifier_do_revalidate($res, $index);

Remarks

Use this method to re-validate a signature in the opened Office document.

Unsign Method (SecureBlackbox_OfficeVerifier Class)

Deletes a signature from the document.

Object Oriented Interface

public function doUnsign($sigindex);

Procedural Interface

secureblackbox_officeverifier_do_unsign($res, $sigindex);

Remarks

Use this method to delete an existing signature from the document. Use SigIndex parameter to specify the signature to be removed.

Verify Method (SecureBlackbox_OfficeVerifier Class)

Verifies the whole document.

Object Oriented Interface

public function doVerify();

Procedural Interface

secureblackbox_officeverifier_do_verify($res);

Remarks

Use this method to verify the document.

ChainElementDownload Event (SecureBlackbox_OfficeVerifier Class)

Fires when there is a need to download a chain element from an online source.

Object Oriented Interface

public function fireChainElementDownload($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 1, array($this, 'fireChainElementDownload'));

Parameter List

 'kind'
 'certrdn'
 'cacertrdn'
 'location'
 'action'

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (SecureBlackbox_OfficeVerifier Class)

Fires when an element required to validate the chain was not located.

Object Oriented Interface

public function fireChainElementNeeded($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 2, array($this, 'fireChainElementNeeded'));

Parameter List

 'kind'
 'certrdn'
 'cacertrdn'

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (SecureBlackbox_OfficeVerifier Class)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Object Oriented Interface

public function fireChainElementStore($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 3, array($this, 'fireChainElementStore'));

Parameter List

 'kind'
 'body'
 'uri'

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (SecureBlackbox_OfficeVerifier Class)

Reports the completion of a certificate chain validation.

Object Oriented Interface

public function fireChainValidated($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 4, array($this, 'fireChainValidated'));

Parameter List

 'index'
 'subjectrdn'
 'validationresult'
 'validationdetails'

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

ChainValidationProgress Event (SecureBlackbox_OfficeVerifier Class)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Object Oriented Interface

public function fireChainValidationProgress($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 5, array($this, 'fireChainValidationProgress'));

Parameter List

 'eventkind'
 'certrdn'
 'cacertrdn'
 'action'

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

DocumentLoaded Event (SecureBlackbox_OfficeVerifier Class)

This event is fired when the document has been loaded into memory.

Object Oriented Interface

public function fireDocumentLoaded($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 6, array($this, 'fireDocumentLoaded'));

Parameter List

 'cancel'

Remarks

The handler for this event is a good place to check document properties, which may be useful when preparing the signature, for example, the document format.

Set Cancel to true to terminate document processing on this stage.

Error Event (SecureBlackbox_OfficeVerifier Class)

Information about errors during the signature validation.

Object Oriented Interface

public function fireError($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 7, array($this, 'fireError'));

Parameter List

 'errorcode'
 'description'

Remarks

This event is fired in case of exceptional conditions during the office document processing.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (SecureBlackbox_OfficeVerifier Class)

This event notifies the application about an underlying control flow event.

Object Oriented Interface

public function fireNotification($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 8, array($this, 'fireNotification'));

Parameter List

 'eventid'
 'eventparam'

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

SignatureFound Event (SecureBlackbox_OfficeVerifier Class)

Signifies the start of signature validation.

Object Oriented Interface

public function fireSignatureFound($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 9, array($this, 'fireSignatureFound'));

Parameter List

 'index'
 'issuerrdn'
 'serialnumber'
 'subjectkeyid'
 'certfound'
 'validatesignature'
 'validatechain'

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (SecureBlackbox_OfficeVerifier Class)

Marks the completion of the signature validation routine.

Object Oriented Interface

public function fireSignatureValidated($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 10, array($this, 'fireSignatureValidated'));

Parameter List

 'index'
 'issuerrdn'
 'serialnumber'
 'subjectkeyid'
 'validationresult'

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (SecureBlackbox_OfficeVerifier Class)

Signifies the start of a timestamp validation routine.

Object Oriented Interface

public function fireTimestampFound($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 11, array($this, 'fireTimestampFound'));

Parameter List

 'index'
 'issuerrdn'
 'serialnumber'
 'subjectkeyid'
 'certfound'
 'validatetimestamp'
 'validatechain'

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (SecureBlackbox_OfficeVerifier Class)

Reports the completion of the timestamp validation routine.

Object Oriented Interface

public function fireTimestampValidated($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 12, array($this, 'fireTimestampValidated'));

Parameter List

 'index'
 'issuerrdn'
 'serialnumber'
 'subjectkeyid'
 'time'
 'validationresult'
 'chainvalidationresult'
 'chainvalidationdetails'

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (SecureBlackbox_OfficeVerifier Class)

Fires when a remote TLS party requests a client certificate.

Object Oriented Interface

public function fireTLSCertNeeded($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 13, array($this, 'fireTLSCertNeeded'));

Parameter List

 'host'
 'canames'

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (SecureBlackbox_OfficeVerifier Class)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Object Oriented Interface

public function fireTLSCertValidate($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 14, array($this, 'fireTLSCertValidate'));

Parameter List

 'serverhost'
 'serverip'
 'accept'

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

TLSEstablished Event (SecureBlackbox_OfficeVerifier Class)

Fires when a TLS handshake with Host successfully completes.

Object Oriented Interface

public function fireTLSEstablished($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 15, array($this, 'fireTLSEstablished'));

Parameter List

 'host'
 'version'
 'ciphersuite'
 'connectionid'
 'abort'

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (SecureBlackbox_OfficeVerifier Class)

Fires when a new TLS handshake is initiated, before the handshake commences.

Object Oriented Interface

public function fireTLSHandshake($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 16, array($this, 'fireTLSHandshake'));

Parameter List

 'host'
 'abort'

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (SecureBlackbox_OfficeVerifier Class)

Reports the graceful closure of a TLS connection.

Object Oriented Interface

public function fireTLSShutdown($param);

Procedural Interface

secureblackbox_officeverifier_register_callback($res, 17, array($this, 'fireTLSShutdown'));

Parameter List

 'host'

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (OfficeVerifier Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

OfficeVerifier Config Settings

Base Config Settings

Trappable Errors (OfficeVerifier Class)

OfficeVerifier Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
	24117249   Input file does not exist (SB_ERROR_OFFICE_INPUTFILE_NOT_EXISTS)
	24117250   Unsupported document format (SB_ERROR_OFFICE_UNSUPPORTED_DOCUMENT_FORMAT)
	24117251   Document cannot be signed (SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNABLE)
	24117252   Document is not signed (SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNED)
	24117253   Document is encrypted (SB_ERROR_OFFICE_DOCUMENT_ENCRYPTED)
	24117254   Document cannot be encrypted (SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTABLE)
	24117255   Document is not encrypted (SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTED)
	24117256   Unknown encryption algorithm (SB_ERROR_OFFICE_DOCUMENT_UNKNOWN_ENCRYPTION)
	24117257   Invalid password (SB_ERROR_OFFICE_INVALID_PASSWORD)
	24117258   Signature not found (SB_ERROR_OFFICE_SIGNATURE_NOT_FOUND)