POP3Client Class

Properties   Methods   Events   Config Settings   Errors  

The POP3Client class provides client-side functionality of the POP3 protocol for collecting E-mail messages from the server.

Class Name

SecureBlackbox_POP3Client

Procedural Interface

 secureblackbox_pop3client_open();
 secureblackbox_pop3client_close($res);
 secureblackbox_pop3client_register_callback($res, $id, $function);
 secureblackbox_pop3client_get_last_error($res);
 secureblackbox_pop3client_get_last_error_code($res);
 secureblackbox_pop3client_set($res, $id, $index, $value);
 secureblackbox_pop3client_get($res, $id, $index);
 secureblackbox_pop3client_do_config($res, $configurationstring);
 secureblackbox_pop3client_do_connect($res, $address, $port);
 secureblackbox_pop3client_do_deletemessage($res, $index);
 secureblackbox_pop3client_do_disconnect($res);
 secureblackbox_pop3client_do_doaction($res, $actionid, $actionparams);
 secureblackbox_pop3client_do_listmessages($res);
 secureblackbox_pop3client_do_ping($res);
 secureblackbox_pop3client_do_receivebytes($res, $index);
 secureblackbox_pop3client_do_receivefile($res, $index, $filename);
 secureblackbox_pop3client_do_receivemessage($res, $index);
 secureblackbox_pop3client_do_undelete($res);

Remarks

Use this class to retrieve e-mail messages from a POP3 server.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

BlockedCertCountThe number of records in the BlockedCert arrays.
BlockedCertBytesReturns the raw certificate data in DER format.
BlockedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ClientCertCountThe number of records in the ClientCert arrays.
ClientCertBytesReturns the raw certificate data in DER format.
ClientCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ConnInfoAEADCipherIndicates whether the encryption algorithm used is an AEAD cipher.
ConnInfoChainValidationDetailsThe details of a certificate chain validation outcome.
ConnInfoChainValidationResultThe outcome of a certificate chain validation routine.
ConnInfoCiphersuiteThe cipher suite employed by this connection.
ConnInfoClientAuthenticatedSpecifies whether client authentication was performed during this connection.
ConnInfoClientAuthRequestedSpecifies whether client authentication was requested during this connection.
ConnInfoConnectionEstablishedIndicates whether the connection has been established fully.
ConnInfoConnectionIDThe unique identifier assigned to this connection.
ConnInfoDigestAlgorithmThe digest algorithm used in a TLS-enabled connection.
ConnInfoEncryptionAlgorithmThe symmetric encryption algorithm used in a TLS-enabled connection.
ConnInfoExportableIndicates whether a TLS connection uses a reduced-strength exportable cipher.
ConnInfoKeyExchangeAlgorithmThe key exchange algorithm used in a TLS-enabled connection.
ConnInfoKeyExchangeKeyBitsThe length of the key exchange key of a TLS-enabled connection.
ConnInfoNamedECCurveThe elliptic curve used in this connection.
ConnInfoPFSCipherIndicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
ConnInfoPreSharedIdentityHintA hint professed by the server to help the client select the PSK identity to use.
ConnInfoPublicKeyBitsThe length of the public key.
ConnInfoResumedSessionIndicates whether a TLS-enabled connection was spawned from another TLS connection.
ConnInfoSecureConnectionIndicates whether TLS or SSL is enabled for this connection.
ConnInfoServerAuthenticatedIndicates whether server authentication was performed during a TLS-enabled connection.
ConnInfoSignatureAlgorithmThe signature algorithm used in a TLS handshake.
ConnInfoSymmetricBlockSizeThe block size of the symmetric algorithm used.
ConnInfoSymmetricKeyBitsThe key length of the symmetric algorithm used.
ConnInfoTotalBytesReceivedThe total number of bytes received over this connection.
ConnInfoTotalBytesSentThe total number of bytes sent over this connection.
ConnInfoValidationLogContains the server certificate's chain validation log.
ConnInfoVersionIndicates the version of SSL/TLS protocol negotiated during this connection.
ExternalCryptoAsyncDocumentIDSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
ExternalCryptoCustomParamsCustom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoDataAdditional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculationSpecifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithmSpecifies the request's signature hash algorithm.
ExternalCryptoKeyIDThe ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecretThe pre-shared key used for DC request authentication.
ExternalCryptoMethodSpecifies the asynchronous signing method.
ExternalCryptoModeSpecifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithmProvide the public key algorithm here if the certificate is not available on the pre-signing stage.
FIPSModeReserved.
KnownCertCountThe number of records in the KnownCert arrays.
KnownCertBytesReturns the raw certificate data in DER format.
KnownCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownCRLCountThe number of records in the KnownCRL arrays.
KnownCRLBytesReturns the raw CRL data in DER format.
KnownCRLHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownOCSPCountThe number of records in the KnownOCSP arrays.
KnownOCSPBytesA buffer containing the raw OCSP response data.
KnownOCSPHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
MsgAttachmentCountReturns the number of attachments in this message.
MsgBccThe contents of the BCC header property.
MsgCcThe value of the CC header property.
MsgCommentsContains additional information about the message body.
MsgDateThe date and time when the message entered the mail delivery system.
MsgDeliveryReceiptEnables delivery notification.
MsgFromContains the value of the From header property.
MsgHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
MsgHtmlTextThe HTML version of the message.
MsgIDThe contents of the Message-ID header property.
MsgInReplyToThe value of the In-Reply-To header property.
MsgKeywordsThe value of the Keywords header property.
MsgMailerThe name of the software that was used to send the message.
MsgPlainTextThe plain text version of the message.
MsgPrioritySpecifies the message priority.
MsgReadReceiptEnables a read notification.
MsgReferencesThe value of the References header property.
MsgReplyToThe value of the Reply-To header property.
MsgReturnPathThe value of the Return-Path header property.
MsgSenderThe value of the Sender header property.
MsgSendToThe value of the To header property.
MsgSubjectContains the subject property of this message.
MsgInfoCountThe number of records in the MsgInfo arrays.
MsgInfoSizeReturns the size of the message in bytes.
MsgInfoUIDReturns the unique ID of the mail message.
PasswordA password to authenticate to the POP3 server.
ProxyAddressThe IP address of the proxy server.
ProxyAuthenticationThe authentication type used by the proxy server.
ProxyPasswordThe password to authenticate to the proxy server.
ProxyPortThe port on the proxy server to connect to.
ProxyProxyTypeThe type of the proxy server.
ProxyRequestHeadersContains HTTP request headers for WebTunnel and HTTP proxy.
ProxyResponseBodyContains the HTTP or HTTPS (WebTunnel) proxy response body.
ProxyResponseHeadersContains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
ProxyUseIPv6Specifies whether IPv6 should be used when connecting through the proxy.
ProxyUseProxyEnables or disables proxy-driven connection.
ProxyUsernameSpecifies the username credential for proxy authentication.
ServerCertCountThe number of records in the ServerCert arrays.
ServerCertBytesReturns the raw certificate data in DER format.
ServerCertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
ServerCertFingerprintContains the fingerprint (a hash imprint) of this certificate.
ServerCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ServerCertIssuerThe common name of the certificate issuer (CA), typically a company name.
ServerCertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
ServerCertKeyAlgorithmSpecifies the public key algorithm of this certificate.
ServerCertKeyBitsReturns the length of the public key.
ServerCertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
ServerCertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
ServerCertPublicKeyBytesContains the certificate's public key in DER format.
ServerCertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
ServerCertSerialNumberReturns the certificate's serial number.
ServerCertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
ServerCertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
ServerCertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
ServerCertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
ServerCertValidFromThe time point at which the certificate becomes valid, in UTC.
ServerCertValidToThe time point at which the certificate expires, in UTC.
ServerInfoApopSupportedIndicates whether the POP3 server supports the APOP command.
ServerInfoAvailableIndicates whether the details of the server capabilities are available.
ServerInfoExpirationPeriodContains the parameter of EXPIRE capability.
ServerInfoExpireSupportedIndicates whether the POP3 server supports the EXPIRE extension.
ServerInfoImplementationSupportedIndicates whether the POP3 server supports the IMPLEMENTATION extension.
ServerInfoLoginDelayReturns the parameter of LOGIN-DELAY capability.
ServerInfoLoginDelaySupportedIndicates whether the POP3 server supports the LOGIN-DELAY extension.
ServerInfoRespCodesSupportedIndicates whether the POP3 server supports the RESP-CODES extension.
ServerInfoSaslSupportedIndicates whether the POP3 server supports SASL authentication.
ServerInfoServerDetailsContains the parameter of the IMPLEMENTATION capability.
ServerInfoTopSupportedIndicates whether the POP3 server supports the TOP command.
ServerInfoUidlSupportedIndicates whether the POP3 server supports the UIDL command.
ServerInfoUserSupportedIndicates whether the POP3 server supports the USER command.
SocketDNSModeSelects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
SocketDNSPortSpecifies the port number to be used for sending queries to the DNS server.
SocketDNSQueryTimeoutThe timeout (in milliseconds) for each DNS query.
SocketDNSServersThe addresses of DNS servers to use for address resolution, separated by commas or semicolons.
SocketDNSTotalTimeoutThe timeout (in milliseconds) for the whole resolution process.
SocketIncomingSpeedLimitThe maximum number of bytes to read from the socket, per second.
SocketLocalAddressThe local network interface to bind the socket to.
SocketLocalPortThe local port number to bind the socket to.
SocketOutgoingSpeedLimitThe maximum number of bytes to write to the socket, per second.
SocketTimeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
SocketUseIPv6Enables or disables IP protocol version 6.
TLSAutoValidateCertificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
TLSBaseConfigurationSelects the base configuration for the TLS settings.
TLSCiphersuitesA list of ciphersuites separated with commas or semicolons.
TLSECCurvesDefines the elliptic curves to enable.
TLSExtensionsProvides access to TLS extensions.
TLSForceResumeIfDestinationChangesWhether to force TLS session resumption when the destination address changes.
TLSPreSharedIdentityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
TLSPreSharedKeyContains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
TLSPreSharedKeyCiphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
TLSRenegotiationAttackPreventionModeSelects the renegotiation attack prevention mechanism.
TLSRevocationCheckSpecifies the kind(s) of revocation check to perform.
TLSSSLOptionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
TLSTLSModeSpecifies the TLS mode to use.
TLSUseExtendedMasterSecretEnables the Extended Master Secret Extension, as defined in RFC 7627.
TLSUseSessionResumptionEnables or disables the TLS session resumption capability.
TLSVersionsThe SSL/TLS versions to enable by default.
TrustedCertCountThe number of records in the TrustedCert arrays.
TrustedCertBytesReturns the raw certificate data in DER format.
TrustedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UsernameA username to authenticate to the POP3 server.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
ConnectEstablishes connection to the POP3 server.
DeleteMessageDeletes a message from the server-side mailbox.
DisconnectCloses connection to the POP3 server.
DoActionPerforms an additional action.
ListMessagesQueries a list of messages available on the server.
PingSends a NOOP command to the POP3 server.
ReceiveBytesDownloads a message to a byte array.
ReceiveFileDownloads a message to a file.
ReceiveMessageDownloads a message.
UndeleteUndeletes messages marked for deletion.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

BeforeAuthFires before the authentication starts.
CommandReports a command sent to the server.
CommandReplyReports the receipt of a reply to a command.
CommandReplyDataReturns the data that accompanies a reply to a command.
ErrorProvides information about errors during POP3 operations.
ExternalSignHandles remote or external signing initiated by the SignExternal method or other source.
NotificationThis event notifies the application about an underlying control flow event.
ProgressReports the progress of the data transfer operation.
TLSCertNeededFires when a remote TLS party requests a client certificate.
TLSCertValidateThis event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
TLSEstablishedFires when a TLS handshake with Host successfully completes.
TLSHandshakeFires when a new TLS handshake is initiated, before the handshake commences.
TLSPSKNotifies the application about the PSK key exchange.
TLSShutdownReports the graceful closure of a TLS connection.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

AuthenticationsSpecifies enabled authentication methods and their priorities.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
MaxLineLengthSpecifies maximum expected line length.
RequestUIDsSpecifies whether to request message UIDs when listing messages.
TempPathPath for storing temporary files.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
UseMicrosoftCTLEnables or disables the automatic use of the Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

BlockedCertCount Property (SecureBlackbox_POP3Client Class)

The number of records in the BlockedCert arrays.

Object Oriented Interface


public function getBlockedCertCount();


public function setBlockedCertCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 1 );


secureblackbox_pop3client_set($res, 1, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getBlockedCertBytes($blockedcertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 2 , $blockedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getBlockedCertHandle($blockedcertindex);


public function setBlockedCertHandle($blockedcertindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 9 , $blockedcertindex);


secureblackbox_pop3client_set($res, 9, $value , $blockedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

ClientCertCount Property (SecureBlackbox_POP3Client Class)

The number of records in the ClientCert arrays.

Object Oriented Interface


public function getClientCertCount();


public function setClientCertCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 36 );


secureblackbox_pop3client_set($res, 36, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

ClientCertBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getClientCertBytes($clientcertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 37 , $clientcertindex);


Remarks

Returns the raw certificate data in DER format.

The $clientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ClientCertHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getClientCertHandle($clientcertindex);


public function setClientCertHandle($clientcertindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 44 , $clientcertindex);


secureblackbox_pop3client_set($res, 44, $value , $clientcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $clientcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.

This property is not available at design time.

Data Type

Long64

ConnInfoAEADCipher Property (SecureBlackbox_POP3Client Class)

Indicates whether the encryption algorithm used is an AEAD cipher.

Object Oriented Interface


public function getConnInfoAEADCipher();


Procedural Interface


secureblackbox_pop3client_get($res, 71 );


Default Value

false

Remarks

Indicates whether the encryption algorithm used is an AEAD cipher.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoChainValidationDetails Property (SecureBlackbox_POP3Client Class)

The details of a certificate chain validation outcome.

Object Oriented Interface


public function getConnInfoChainValidationDetails();


Procedural Interface


secureblackbox_pop3client_get($res, 72 );


Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoChainValidationResult Property (SecureBlackbox_POP3Client Class)

The outcome of a certificate chain validation routine.

Object Oriented Interface


public function getConnInfoChainValidationResult();


Procedural Interface


secureblackbox_pop3client_get($res, 73 );


Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoCiphersuite Property (SecureBlackbox_POP3Client Class)

The cipher suite employed by this connection.

Object Oriented Interface


public function getConnInfoCiphersuite();


Procedural Interface


secureblackbox_pop3client_get($res, 74 );


Default Value

''

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoClientAuthenticated Property (SecureBlackbox_POP3Client Class)

Specifies whether client authentication was performed during this connection.

Object Oriented Interface


public function getConnInfoClientAuthenticated();


Procedural Interface


secureblackbox_pop3client_get($res, 75 );


Default Value

false

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoClientAuthRequested Property (SecureBlackbox_POP3Client Class)

Specifies whether client authentication was requested during this connection.

Object Oriented Interface


public function getConnInfoClientAuthRequested();


Procedural Interface


secureblackbox_pop3client_get($res, 76 );


Default Value

false

Remarks

Specifies whether client authentication was requested during this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoConnectionEstablished Property (SecureBlackbox_POP3Client Class)

Indicates whether the connection has been established fully.

Object Oriented Interface


public function getConnInfoConnectionEstablished();


Procedural Interface


secureblackbox_pop3client_get($res, 77 );


Default Value

false

Remarks

Indicates whether the connection has been established fully.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoConnectionID Property (SecureBlackbox_POP3Client Class)

The unique identifier assigned to this connection.

Object Oriented Interface


public function getConnInfoConnectionID();


Procedural Interface


secureblackbox_pop3client_get($res, 78 );


Remarks

The unique identifier assigned to this connection.

This property is read-only and not available at design time.

Data Type

Byte Array

ConnInfoDigestAlgorithm Property (SecureBlackbox_POP3Client Class)

The digest algorithm used in a TLS-enabled connection.

Object Oriented Interface


public function getConnInfoDigestAlgorithm();


Procedural Interface


secureblackbox_pop3client_get($res, 79 );


Default Value

''

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoEncryptionAlgorithm Property (SecureBlackbox_POP3Client Class)

The symmetric encryption algorithm used in a TLS-enabled connection.

Object Oriented Interface


public function getConnInfoEncryptionAlgorithm();


Procedural Interface


secureblackbox_pop3client_get($res, 80 );


Default Value

''

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoExportable Property (SecureBlackbox_POP3Client Class)

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

Object Oriented Interface


public function getConnInfoExportable();


Procedural Interface


secureblackbox_pop3client_get($res, 81 );


Default Value

false

Remarks

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoKeyExchangeAlgorithm Property (SecureBlackbox_POP3Client Class)

The key exchange algorithm used in a TLS-enabled connection.

Object Oriented Interface


public function getConnInfoKeyExchangeAlgorithm();


Procedural Interface


secureblackbox_pop3client_get($res, 82 );


Default Value

''

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoKeyExchangeKeyBits Property (SecureBlackbox_POP3Client Class)

The length of the key exchange key of a TLS-enabled connection.

Object Oriented Interface


public function getConnInfoKeyExchangeKeyBits();


Procedural Interface


secureblackbox_pop3client_get($res, 83 );


Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoNamedECCurve Property (SecureBlackbox_POP3Client Class)

The elliptic curve used in this connection.

Object Oriented Interface


public function getConnInfoNamedECCurve();


Procedural Interface


secureblackbox_pop3client_get($res, 84 );


Default Value

''

Remarks

The elliptic curve used in this connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoPFSCipher Property (SecureBlackbox_POP3Client Class)

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Object Oriented Interface


public function getConnInfoPFSCipher();


Procedural Interface


secureblackbox_pop3client_get($res, 85 );


Default Value

false

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoPreSharedIdentityHint Property (SecureBlackbox_POP3Client Class)

A hint professed by the server to help the client select the PSK identity to use.

Object Oriented Interface


public function getConnInfoPreSharedIdentityHint();


Procedural Interface


secureblackbox_pop3client_get($res, 86 );


Default Value

''

Remarks

A hint professed by the server to help the client select the PSK identity to use.

This property is read-only and not available at design time.

Data Type

String

ConnInfoPublicKeyBits Property (SecureBlackbox_POP3Client Class)

The length of the public key.

Object Oriented Interface


public function getConnInfoPublicKeyBits();


Procedural Interface


secureblackbox_pop3client_get($res, 87 );


Default Value

0

Remarks

The length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoResumedSession Property (SecureBlackbox_POP3Client Class)

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Object Oriented Interface


public function getConnInfoResumedSession();


Procedural Interface


secureblackbox_pop3client_get($res, 88 );


Default Value

false

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoSecureConnection Property (SecureBlackbox_POP3Client Class)

Indicates whether TLS or SSL is enabled for this connection.

Object Oriented Interface


public function getConnInfoSecureConnection();


Procedural Interface


secureblackbox_pop3client_get($res, 89 );


Default Value

false

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoServerAuthenticated Property (SecureBlackbox_POP3Client Class)

Indicates whether server authentication was performed during a TLS-enabled connection.

Object Oriented Interface


public function getConnInfoServerAuthenticated();


Procedural Interface


secureblackbox_pop3client_get($res, 90 );


Default Value

false

Remarks

Indicates whether server authentication was performed during a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoSignatureAlgorithm Property (SecureBlackbox_POP3Client Class)

The signature algorithm used in a TLS handshake.

Object Oriented Interface


public function getConnInfoSignatureAlgorithm();


Procedural Interface


secureblackbox_pop3client_get($res, 91 );


Default Value

''

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only and not available at design time.

Data Type

String

ConnInfoSymmetricBlockSize Property (SecureBlackbox_POP3Client Class)

The block size of the symmetric algorithm used.

Object Oriented Interface


public function getConnInfoSymmetricBlockSize();


Procedural Interface


secureblackbox_pop3client_get($res, 92 );


Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoSymmetricKeyBits Property (SecureBlackbox_POP3Client Class)

The key length of the symmetric algorithm used.

Object Oriented Interface


public function getConnInfoSymmetricKeyBits();


Procedural Interface


secureblackbox_pop3client_get($res, 93 );


Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoTotalBytesReceived Property (SecureBlackbox_POP3Client Class)

The total number of bytes received over this connection.

Object Oriented Interface


public function getConnInfoTotalBytesReceived();


Procedural Interface


secureblackbox_pop3client_get($res, 94 );


Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only and not available at design time.

Data Type

Long64

ConnInfoTotalBytesSent Property (SecureBlackbox_POP3Client Class)

The total number of bytes sent over this connection.

Object Oriented Interface


public function getConnInfoTotalBytesSent();


Procedural Interface


secureblackbox_pop3client_get($res, 95 );


Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only and not available at design time.

Data Type

Long64

ConnInfoValidationLog Property (SecureBlackbox_POP3Client Class)

Contains the server certificate's chain validation log.

Object Oriented Interface


public function getConnInfoValidationLog();


Procedural Interface


secureblackbox_pop3client_get($res, 96 );


Default Value

''

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only and not available at design time.

Data Type

String

ConnInfoVersion Property (SecureBlackbox_POP3Client Class)

Indicates the version of SSL/TLS protocol negotiated during this connection.

Object Oriented Interface


public function getConnInfoVersion();


Procedural Interface


secureblackbox_pop3client_get($res, 97 );


Default Value

''

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only and not available at design time.

Data Type

String

ExternalCryptoAsyncDocumentID Property (SecureBlackbox_POP3Client Class)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Object Oriented Interface


public function getExternalCryptoAsyncDocumentID();


public function setExternalCryptoAsyncDocumentID($value);

Procedural Interface


secureblackbox_pop3client_get($res, 98 );


secureblackbox_pop3client_set($res, 98, $value );

Default Value

''

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (SecureBlackbox_POP3Client Class)

Custom parameters to be passed to the signing service (uninterpreted).

Object Oriented Interface


public function getExternalCryptoCustomParams();


public function setExternalCryptoCustomParams($value);

Procedural Interface


secureblackbox_pop3client_get($res, 99 );


secureblackbox_pop3client_set($res, 99, $value );

Default Value

''

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (SecureBlackbox_POP3Client Class)

Additional data to be included in the async state and mirrored back by the requestor.

Object Oriented Interface


public function getExternalCryptoData();


public function setExternalCryptoData($value);

Procedural Interface


secureblackbox_pop3client_get($res, 100 );


secureblackbox_pop3client_set($res, 100, $value );

Default Value

''

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (SecureBlackbox_POP3Client Class)

Specifies whether the message hash is to be calculated at the external endpoint.

Object Oriented Interface


public function getExternalCryptoExternalHashCalculation();


public function setExternalCryptoExternalHashCalculation($value);

Procedural Interface


secureblackbox_pop3client_get($res, 101 );


secureblackbox_pop3client_set($res, 101, $value );

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (SecureBlackbox_POP3Client Class)

Specifies the request's signature hash algorithm.

Object Oriented Interface


public function getExternalCryptoHashAlgorithm();


public function setExternalCryptoHashAlgorithm($value);

Procedural Interface


secureblackbox_pop3client_get($res, 102 );


secureblackbox_pop3client_set($res, 102, $value );

Default Value

'SHA256'

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Data Type

String

ExternalCryptoKeyID Property (SecureBlackbox_POP3Client Class)

The ID of the pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeyID();


public function setExternalCryptoKeyID($value);

Procedural Interface


secureblackbox_pop3client_get($res, 103 );


secureblackbox_pop3client_set($res, 103, $value );

Default Value

''

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (SecureBlackbox_POP3Client Class)

The pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeySecret();


public function setExternalCryptoKeySecret($value);

Procedural Interface


secureblackbox_pop3client_get($res, 104 );


secureblackbox_pop3client_set($res, 104, $value );

Default Value

''

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (SecureBlackbox_POP3Client Class)

Specifies the asynchronous signing method.

Object Oriented Interface


public function getExternalCryptoMethod();


public function setExternalCryptoMethod($value);

Procedural Interface


secureblackbox_pop3client_get($res, 105 );


secureblackbox_pop3client_set($res, 105, $value );

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Data Type

Integer

ExternalCryptoMode Property (SecureBlackbox_POP3Client Class)

Specifies the external cryptography mode.

Object Oriented Interface


public function getExternalCryptoMode();


public function setExternalCryptoMode($value);

Procedural Interface


secureblackbox_pop3client_get($res, 106 );


secureblackbox_pop3client_set($res, 106, $value );

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with the OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (SecureBlackbox_POP3Client Class)

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Object Oriented Interface


public function getExternalCryptoPublicKeyAlgorithm();


public function setExternalCryptoPublicKeyAlgorithm($value);

Procedural Interface


secureblackbox_pop3client_get($res, 107 );


secureblackbox_pop3client_set($res, 107, $value );

Default Value

''

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Data Type

String

FIPSMode Property (SecureBlackbox_POP3Client Class)

Reserved.

Object Oriented Interface


public function getFIPSMode();


public function setFIPSMode($value);

Procedural Interface


secureblackbox_pop3client_get($res, 108 );


secureblackbox_pop3client_set($res, 108, $value );

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

KnownCertCount Property (SecureBlackbox_POP3Client Class)

The number of records in the KnownCert arrays.

Object Oriented Interface


public function getKnownCertCount();


public function setKnownCertCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 109 );


secureblackbox_pop3client_set($res, 109, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getKnownCertBytes($knowncertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 110 , $knowncertindex);


Remarks

Returns the raw certificate data in DER format.

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCertHandle($knowncertindex);


public function setKnownCertHandle($knowncertindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 117 , $knowncertindex);


secureblackbox_pop3client_set($res, 117, $value , $knowncertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (SecureBlackbox_POP3Client Class)

The number of records in the KnownCRL arrays.

Object Oriented Interface


public function getKnownCRLCount();


public function setKnownCRLCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 144 );


secureblackbox_pop3client_set($res, 144, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw CRL data in DER format.

Object Oriented Interface


public function getKnownCRLBytes($knowncrlindex);


Procedural Interface


secureblackbox_pop3client_get($res, 145 , $knowncrlindex);


Remarks

Returns the raw CRL data in DER format.

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCRLHandle($knowncrlindex);


public function setKnownCRLHandle($knowncrlindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 148 , $knowncrlindex);


secureblackbox_pop3client_set($res, 148, $value , $knowncrlindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (SecureBlackbox_POP3Client Class)

The number of records in the KnownOCSP arrays.

Object Oriented Interface


public function getKnownOCSPCount();


public function setKnownOCSPCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 156 );


secureblackbox_pop3client_set($res, 156, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (SecureBlackbox_POP3Client Class)

A buffer containing the raw OCSP response data.

Object Oriented Interface


public function getKnownOCSPBytes($knownocspindex);


Procedural Interface


secureblackbox_pop3client_get($res, 157 , $knownocspindex);


Remarks

A buffer containing the raw OCSP response data.

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownOCSPHandle($knownocspindex);


public function setKnownOCSPHandle($knownocspindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 159 , $knownocspindex);


secureblackbox_pop3client_set($res, 159, $value , $knownocspindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

MsgAttachmentCount Property (SecureBlackbox_POP3Client Class)

Returns the number of attachments in this message.

Object Oriented Interface


public function getMsgAttachmentCount();


Procedural Interface


secureblackbox_pop3client_get($res, 164 );


Default Value

0

Remarks

Returns the number of attachments in this message.

This property is read-only and not available at design time.

Data Type

Integer

MsgBcc Property (SecureBlackbox_POP3Client Class)

The contents of the BCC header property.

Object Oriented Interface


public function getMsgBcc();


Procedural Interface


secureblackbox_pop3client_get($res, 165 );


Default Value

''

Remarks

The contents of the BCC header field.

The BCC header field contains the addresses of secondary recipients of the message whose addresses are not to be revealed to other recipients of the message. Mail servers remove the BCC header when processing the message and use its value for dispatching the message only.

This property is read-only and not available at design time.

Data Type

String

MsgCc Property (SecureBlackbox_POP3Client Class)

The value of the CC header property.

Object Oriented Interface


public function getMsgCc();


Procedural Interface


secureblackbox_pop3client_get($res, 166 );


Default Value

''

Remarks

The value of the CC header field.

The CC field contains the addresses of secondary recipients of the message.

This property is read-only and not available at design time.

Data Type

String

MsgComments Property (SecureBlackbox_POP3Client Class)

Contains additional information about the message body.

Object Oriented Interface


public function getMsgComments();


Procedural Interface


secureblackbox_pop3client_get($res, 167 );


Default Value

''

Remarks

Contains additional information about the message body.

This property is read-only and not available at design time.

Data Type

String

MsgDate Property (SecureBlackbox_POP3Client Class)

The date and time when the message entered the mail delivery system.

Object Oriented Interface


public function getMsgDate();


Procedural Interface


secureblackbox_pop3client_get($res, 168 );


Default Value

''

Remarks

The date and time when the message entered the mail delivery system.

This field contains the date and time at which the creator of the message posted the message to the mail delivery system.

The date is returned and accepted in UTC time zone.

This property is read-only and not available at design time.

Data Type

String

MsgDeliveryReceipt Property (SecureBlackbox_POP3Client Class)

Enables delivery notification.

Object Oriented Interface


public function getMsgDeliveryReceipt();


Procedural Interface


secureblackbox_pop3client_get($res, 169 );


Default Value

false

Remarks

Enables delivery notification.

This property is read-only and not available at design time.

Data Type

Boolean

MsgFrom Property (SecureBlackbox_POP3Client Class)

Contains the value of the From header property.

Object Oriented Interface


public function getMsgFrom();


Procedural Interface


secureblackbox_pop3client_get($res, 170 );


Default Value

''

Remarks

Contains the value of the From header field.

This field contains the address(es) of the message author(s). If the actual sender is not the author of the message, use MsgSender to specify the sender separately.

This property is read-only and not available at design time.

Data Type

String

MsgHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getMsgHandle();


Procedural Interface


secureblackbox_pop3client_get($res, 171 );


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

MsgHtmlText Property (SecureBlackbox_POP3Client Class)

The HTML version of the message.

Object Oriented Interface


public function getMsgHtmlText();


Procedural Interface


secureblackbox_pop3client_get($res, 172 );


Default Value

''

Remarks

The HTML version of the message.

This property is read-only and not available at design time.

Data Type

String

MsgID Property (SecureBlackbox_POP3Client Class)

The contents of the Message-ID header property.

Object Oriented Interface


public function getMsgID();


Procedural Interface


secureblackbox_pop3client_get($res, 173 );


Default Value

''

Remarks

The contents of the Message-ID header field.

This field contains a unique identifier that refers to a particular version of this message.

This property is read-only and not available at design time.

Data Type

String

MsgInReplyTo Property (SecureBlackbox_POP3Client Class)

The value of the In-Reply-To header property.

Object Oriented Interface


public function getMsgInReplyTo();


Procedural Interface


secureblackbox_pop3client_get($res, 174 );


Default Value

''

Remarks

The value of the In-Reply-To header field.

A reply message should have the "In-Reply-To:" header field which may be used to identify the message (or messages) to which the new message is a reply.

This property is read-only and not available at design time.

Data Type

String

MsgKeywords Property (SecureBlackbox_POP3Client Class)

The value of the Keywords header property.

Object Oriented Interface


public function getMsgKeywords();


Procedural Interface


secureblackbox_pop3client_get($res, 175 );


Default Value

''

Remarks

The value of the Keywords header field.

This field can be used to add some important words and phrases that might be useful for the recipient.

This property is read-only and not available at design time.

Data Type

String

MsgMailer Property (SecureBlackbox_POP3Client Class)

The name of the software that was used to send the message.

Object Oriented Interface


public function getMsgMailer();


Procedural Interface


secureblackbox_pop3client_get($res, 176 );


Default Value

''

Remarks

The name of the software that was used to send the message.

This property is read-only and not available at design time.

Data Type

String

MsgPlainText Property (SecureBlackbox_POP3Client Class)

The plain text version of the message.

Object Oriented Interface


public function getMsgPlainText();


Procedural Interface


secureblackbox_pop3client_get($res, 177 );


Default Value

''

Remarks

The plain text version of the message.

This property is read-only and not available at design time.

Data Type

String

MsgPriority Property (SecureBlackbox_POP3Client Class)

Specifies the message priority.

Object Oriented Interface


public function getMsgPriority();


Procedural Interface


secureblackbox_pop3client_get($res, 178 );


Default Value

2

Remarks

Specifies the message priority.

Available options:

mpLowest0
mpLow1
mpNormal2
mpHigh3
mpHighest4

This property is read-only and not available at design time.

Data Type

Integer

MsgReadReceipt Property (SecureBlackbox_POP3Client Class)

Enables a read notification.

Object Oriented Interface


public function getMsgReadReceipt();


Procedural Interface


secureblackbox_pop3client_get($res, 179 );


Default Value

false

Remarks

Enables a read notification.

This property is read-only and not available at design time.

Data Type

Boolean

MsgReferences Property (SecureBlackbox_POP3Client Class)

The value of the References header property.

Object Oriented Interface


public function getMsgReferences();


Procedural Interface


secureblackbox_pop3client_get($res, 180 );


Default Value

''

Remarks

The value of the References header field.

A reply message should include a "References:" header field which may be used to identify the "conversation thread". If the initial message is a reply itself, the References of the reply contain combined content of its "References:", "InReplyTo:" and "MessageID:" fields, subject to their presence in the original message.

This property is read-only and not available at design time.

Data Type

String

MsgReplyTo Property (SecureBlackbox_POP3Client Class)

The value of the Reply-To header property.

Object Oriented Interface


public function getMsgReplyTo();


Procedural Interface


secureblackbox_pop3client_get($res, 181 );


Default Value

''

Remarks

The value of the Reply-To header field.

This field contains the addresses to which the replies to this message should be sent. This field is optional. If not specified, the replies must be sent to the addresses specified in the MsgFrom field.

This property is read-only and not available at design time.

Data Type

String

MsgReturnPath Property (SecureBlackbox_POP3Client Class)

The value of the Return-Path header property.

Object Oriented Interface


public function getMsgReturnPath();


Procedural Interface


secureblackbox_pop3client_get($res, 182 );


Default Value

''

Remarks

The value of the Return-Path header field.

This field contains the address to which this message shall be returned in case of unsuccessful delivery.

This property is read-only and not available at design time.

Data Type

String

MsgSender Property (SecureBlackbox_POP3Client Class)

The value of the Sender header property.

Object Oriented Interface


public function getMsgSender();


Procedural Interface


secureblackbox_pop3client_get($res, 183 );


Default Value

''

Remarks

The value of the Sender header field.

This field specifies the mailbox of the agent responsible for the actual transmission of this message. If the originator of the message can be indicated by a single mailbox and both the author and the transmitter are identical, the "Sender:" field is deemed excessive and should not be used.

This property is read-only and not available at design time.

Data Type

String

MsgSendTo Property (SecureBlackbox_POP3Client Class)

The value of the To header property.

Object Oriented Interface


public function getMsgSendTo();


Procedural Interface


secureblackbox_pop3client_get($res, 184 );


Default Value

''

Remarks

The value of the To header field.

This field specifies the address(es) of the primary recipient(s) of the message.

This property is read-only and not available at design time.

Data Type

String

MsgSubject Property (SecureBlackbox_POP3Client Class)

Contains the subject property of this message.

Object Oriented Interface


public function getMsgSubject();


Procedural Interface


secureblackbox_pop3client_get($res, 185 );


Default Value

''

Remarks

Contains the subject field of this message.

This property is read-only and not available at design time.

Data Type

String

MsgInfoCount Property (SecureBlackbox_POP3Client Class)

The number of records in the MsgInfo arrays.

Object Oriented Interface


public function getMsgInfoCount();


Procedural Interface


secureblackbox_pop3client_get($res, 186 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at MsgInfoCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

MsgInfoSize Property (SecureBlackbox_POP3Client Class)

Returns the size of the message in bytes.

Object Oriented Interface


public function getMsgInfoSize($msginfoindex);


Procedural Interface


secureblackbox_pop3client_get($res, 187 , $msginfoindex);


Default Value

0

Remarks

Returns the size of the message in bytes.

The $msginfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MsgInfoCount property.

This property is read-only and not available at design time.

Data Type

Long64

MsgInfoUID Property (SecureBlackbox_POP3Client Class)

Returns the unique ID of the mail message.

Object Oriented Interface


public function getMsgInfoUID($msginfoindex);


Procedural Interface


secureblackbox_pop3client_get($res, 188 , $msginfoindex);


Default Value

''

Remarks

Returns the unique ID of the mail message.

The $msginfoindex parameter specifies the index of the item in the array. The size of the array is controlled by the MsgInfoCount property.

This property is read-only and not available at design time.

Data Type

String

Password Property (SecureBlackbox_POP3Client Class)

A password to authenticate to the POP3 server.

Object Oriented Interface


public function getPassword();


public function setPassword($value);

Procedural Interface


secureblackbox_pop3client_get($res, 189 );


secureblackbox_pop3client_set($res, 189, $value );

Default Value

''

Remarks

Use this property together with Username to provide an authentication password. In order to use OAuth 2.0 authentication to access the POP3 server, assign the access token to this property prepending it with "oauth:".

Data Type

String

ProxyAddress Property (SecureBlackbox_POP3Client Class)

The IP address of the proxy server.

Object Oriented Interface


public function getProxyAddress();


public function setProxyAddress($value);

Procedural Interface


secureblackbox_pop3client_get($res, 190 );


secureblackbox_pop3client_set($res, 190, $value );

Default Value

''

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (SecureBlackbox_POP3Client Class)

The authentication type used by the proxy server.

Object Oriented Interface


public function getProxyAuthentication();


public function setProxyAuthentication($value);

Procedural Interface


secureblackbox_pop3client_get($res, 191 );


secureblackbox_pop3client_set($res, 191, $value );

Default Value

0

Remarks

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Data Type

Integer

ProxyPassword Property (SecureBlackbox_POP3Client Class)

The password to authenticate to the proxy server.

Object Oriented Interface


public function getProxyPassword();


public function setProxyPassword($value);

Procedural Interface


secureblackbox_pop3client_get($res, 192 );


secureblackbox_pop3client_set($res, 192, $value );

Default Value

''

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (SecureBlackbox_POP3Client Class)

The port on the proxy server to connect to.

Object Oriented Interface


public function getProxyPort();


public function setProxyPort($value);

Procedural Interface


secureblackbox_pop3client_get($res, 193 );


secureblackbox_pop3client_set($res, 193, $value );

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (SecureBlackbox_POP3Client Class)

The type of the proxy server.

Object Oriented Interface


public function getProxyProxyType();


public function setProxyProxyType($value);

Procedural Interface


secureblackbox_pop3client_get($res, 194 );


secureblackbox_pop3client_set($res, 194, $value );

Default Value

0

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

Data Type

Integer

ProxyRequestHeaders Property (SecureBlackbox_POP3Client Class)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Object Oriented Interface


public function getProxyRequestHeaders();


public function setProxyRequestHeaders($value);

Procedural Interface


secureblackbox_pop3client_get($res, 195 );


secureblackbox_pop3client_set($res, 195, $value );

Default Value

''

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (SecureBlackbox_POP3Client Class)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Object Oriented Interface


public function getProxyResponseBody();


public function setProxyResponseBody($value);

Procedural Interface


secureblackbox_pop3client_get($res, 196 );


secureblackbox_pop3client_set($res, 196, $value );

Default Value

''

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (SecureBlackbox_POP3Client Class)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Object Oriented Interface


public function getProxyResponseHeaders();


public function setProxyResponseHeaders($value);

Procedural Interface


secureblackbox_pop3client_get($res, 197 );


secureblackbox_pop3client_set($res, 197, $value );

Default Value

''

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (SecureBlackbox_POP3Client Class)

Specifies whether IPv6 should be used when connecting through the proxy.

Object Oriented Interface


public function getProxyUseIPv6();


public function setProxyUseIPv6($value);

Procedural Interface


secureblackbox_pop3client_get($res, 198 );


secureblackbox_pop3client_set($res, 198, $value );

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (SecureBlackbox_POP3Client Class)

Enables or disables proxy-driven connection.

Object Oriented Interface


public function getProxyUseProxy();


public function setProxyUseProxy($value);

Procedural Interface


secureblackbox_pop3client_get($res, 199 );


secureblackbox_pop3client_set($res, 199, $value );

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (SecureBlackbox_POP3Client Class)

Specifies the username credential for proxy authentication.

Object Oriented Interface


public function getProxyUsername();


public function setProxyUsername($value);

Procedural Interface


secureblackbox_pop3client_get($res, 200 );


secureblackbox_pop3client_set($res, 200, $value );

Default Value

''

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

ServerCertCount Property (SecureBlackbox_POP3Client Class)

The number of records in the ServerCert arrays.

Object Oriented Interface


public function getServerCertCount();


Procedural Interface


secureblackbox_pop3client_get($res, 201 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getServerCertBytes($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 202 , $servercertindex);


Remarks

Returns the raw certificate data in DER format.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertCAKeyID Property (SecureBlackbox_POP3Client Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface


public function getServerCertCAKeyID($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 204 , $servercertindex);


Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertFingerprint Property (SecureBlackbox_POP3Client Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface


public function getServerCertFingerprint($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 207 , $servercertindex);


Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getServerCertHandle($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 209 , $servercertindex);


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

ServerCertIssuer Property (SecureBlackbox_POP3Client Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface


public function getServerCertIssuer($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 211 , $servercertindex);


Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertIssuerRDN Property (SecureBlackbox_POP3Client Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface


public function getServerCertIssuerRDN($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 212 , $servercertindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertKeyAlgorithm Property (SecureBlackbox_POP3Client Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface


public function getServerCertKeyAlgorithm($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 213 , $servercertindex);


Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertKeyBits Property (SecureBlackbox_POP3Client Class)

Returns the length of the public key.

Object Oriented Interface


public function getServerCertKeyBits($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 214 , $servercertindex);


Default Value

0

Remarks

Returns the length of the public key.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertKeyFingerprint Property (SecureBlackbox_POP3Client Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface


public function getServerCertKeyFingerprint($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 215 , $servercertindex);


Remarks

Returns a fingerprint of the public key contained in the certificate.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertKeyUsage Property (SecureBlackbox_POP3Client Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface


public function getServerCertKeyUsage($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 216 , $servercertindex);


Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertPublicKeyBytes Property (SecureBlackbox_POP3Client Class)

Contains the certificate's public key in DER format.

Object Oriented Interface


public function getServerCertPublicKeyBytes($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 225 , $servercertindex);


Remarks

Contains the certificate's public key in DER format.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSelfSigned Property (SecureBlackbox_POP3Client Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface


public function getServerCertSelfSigned($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 227 , $servercertindex);


Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ServerCertSerialNumber Property (SecureBlackbox_POP3Client Class)

Returns the certificate's serial number.

Object Oriented Interface


public function getServerCertSerialNumber($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 228 , $servercertindex);


Remarks

Returns the certificate's serial number.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSigAlgorithm Property (SecureBlackbox_POP3Client Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface


public function getServerCertSigAlgorithm($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 229 , $servercertindex);


Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertSubject Property (SecureBlackbox_POP3Client Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface


public function getServerCertSubject($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 230 , $servercertindex);


Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertSubjectKeyID Property (SecureBlackbox_POP3Client Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface


public function getServerCertSubjectKeyID($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 232 , $servercertindex);


Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSubjectRDN Property (SecureBlackbox_POP3Client Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface


public function getServerCertSubjectRDN($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 233 , $servercertindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertValidFrom Property (SecureBlackbox_POP3Client Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface


public function getServerCertValidFrom($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 234 , $servercertindex);


Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertValidTo Property (SecureBlackbox_POP3Client Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface


public function getServerCertValidTo($servercertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 235 , $servercertindex);


Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

The $servercertindex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerInfoApopSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the APOP command.

Object Oriented Interface


public function getServerInfoApopSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 236 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the APOP command.

This property is read-only.

Data Type

Boolean

ServerInfoAvailable Property (SecureBlackbox_POP3Client Class)

Indicates whether the details of the server capabilities are available.

Object Oriented Interface


public function getServerInfoAvailable();


Procedural Interface


secureblackbox_pop3client_get($res, 237 );


Default Value

false

Remarks

Indicates whether the details of the server capabilities are available.

This property is read-only.

Data Type

Boolean

ServerInfoExpirationPeriod Property (SecureBlackbox_POP3Client Class)

Contains the parameter of EXPIRE capability.

Object Oriented Interface


public function getServerInfoExpirationPeriod();


Procedural Interface


secureblackbox_pop3client_get($res, 238 );


Default Value

-1

Remarks

Contains the parameter of EXPIRE capability.

This property is read-only.

Data Type

Integer

ServerInfoExpireSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the EXPIRE extension.

Object Oriented Interface


public function getServerInfoExpireSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 239 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the EXPIRE extension. See ServerInfoExpirationPeriod field.

This property is read-only.

Data Type

Boolean

ServerInfoImplementationSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the IMPLEMENTATION extension.

Object Oriented Interface


public function getServerInfoImplementationSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 240 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the IMPLEMENTATION extension. See ServerInfoServerDetails field.

This property is read-only.

Data Type

Boolean

ServerInfoLoginDelay Property (SecureBlackbox_POP3Client Class)

Returns the parameter of LOGIN-DELAY capability.

Object Oriented Interface


public function getServerInfoLoginDelay();


Procedural Interface


secureblackbox_pop3client_get($res, 241 );


Default Value

0

Remarks

Returns the parameter of LOGIN-DELAY capability.

The LOGIN-DELAY parameter indicates the minimum number of seconds between unsuccessful login attempts. See RFC 2449, Section 6.5 for more information.

This property is read-only.

Data Type

Integer

ServerInfoLoginDelaySupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the LOGIN-DELAY extension.

Object Oriented Interface


public function getServerInfoLoginDelaySupported();


Procedural Interface


secureblackbox_pop3client_get($res, 242 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the LOGIN-DELAY extension.

See ServerInfoLoginDelay property for the details.

This property is read-only.

Data Type

Boolean

ServerInfoRespCodesSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the RESP-CODES extension.

Object Oriented Interface


public function getServerInfoRespCodesSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 243 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the RESP-CODES extension.

The RESP-CODES capability indicates that any response text issued by this server which begins with an open square bracket ("[") is an extended response code (see section 8 of RFC 2449). For more information see For more information see RFC 2449, Section 6.4.

This property is read-only.

Data Type

Boolean

ServerInfoSaslSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports SASL authentication.

Object Oriented Interface


public function getServerInfoSaslSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 244 );


Default Value

false

Remarks

Indicates whether the POP3 server supports SASL authentication.

This property is read-only.

Data Type

Boolean

ServerInfoServerDetails Property (SecureBlackbox_POP3Client Class)

Contains the parameter of the IMPLEMENTATION capability.

Object Oriented Interface


public function getServerInfoServerDetails();


Procedural Interface


secureblackbox_pop3client_get($res, 245 );


Default Value

''

Remarks

Contains the parameter of the IMPLEMENTATION capability.

The value of this property only makes sense if ServerInfoAvailable and ServerInfoImplementationSupported parameters are true.

The parameter to the IMPLEMENTATION capability consists of one or more tokens that identify the server. For more information see RFC 2449, Section 6.9.

This property is read-only.

Data Type

String

ServerInfoTopSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the TOP command.

Object Oriented Interface


public function getServerInfoTopSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 246 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the TOP command.

This property is read-only.

Data Type

Boolean

ServerInfoUidlSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the UIDL command.

Object Oriented Interface


public function getServerInfoUidlSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 247 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the UIDL command.

This property is read-only.

Data Type

Boolean

ServerInfoUserSupported Property (SecureBlackbox_POP3Client Class)

Indicates whether the POP3 server supports the USER command.

Object Oriented Interface


public function getServerInfoUserSupported();


Procedural Interface


secureblackbox_pop3client_get($res, 248 );


Default Value

false

Remarks

Indicates whether the POP3 server supports the USER command.

This property is read-only.

Data Type

Boolean

SocketDNSMode Property (SecureBlackbox_POP3Client Class)

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Object Oriented Interface


public function getSocketDNSMode();


public function setSocketDNSMode($value);

Procedural Interface


secureblackbox_pop3client_get($res, 249 );


secureblackbox_pop3client_set($res, 249, $value );

Default Value

0

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

Data Type

Integer

SocketDNSPort Property (SecureBlackbox_POP3Client Class)

Specifies the port number to be used for sending queries to the DNS server.

Object Oriented Interface


public function getSocketDNSPort();


public function setSocketDNSPort($value);

Procedural Interface


secureblackbox_pop3client_get($res, 250 );


secureblackbox_pop3client_set($res, 250, $value );

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (SecureBlackbox_POP3Client Class)

The timeout (in milliseconds) for each DNS query.

Object Oriented Interface


public function getSocketDNSQueryTimeout();


public function setSocketDNSQueryTimeout($value);

Procedural Interface


secureblackbox_pop3client_get($res, 251 );


secureblackbox_pop3client_set($res, 251, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (SecureBlackbox_POP3Client Class)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Object Oriented Interface


public function getSocketDNSServers();


public function setSocketDNSServers($value);

Procedural Interface


secureblackbox_pop3client_get($res, 252 );


secureblackbox_pop3client_set($res, 252, $value );

Default Value

''

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (SecureBlackbox_POP3Client Class)

The timeout (in milliseconds) for the whole resolution process.

Object Oriented Interface


public function getSocketDNSTotalTimeout();


public function setSocketDNSTotalTimeout($value);

Procedural Interface


secureblackbox_pop3client_get($res, 253 );


secureblackbox_pop3client_set($res, 253, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (SecureBlackbox_POP3Client Class)

The maximum number of bytes to read from the socket, per second.

Object Oriented Interface


public function getSocketIncomingSpeedLimit();


public function setSocketIncomingSpeedLimit($value);

Procedural Interface


secureblackbox_pop3client_get($res, 254 );


secureblackbox_pop3client_set($res, 254, $value );

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (SecureBlackbox_POP3Client Class)

The local network interface to bind the socket to.

Object Oriented Interface


public function getSocketLocalAddress();


public function setSocketLocalAddress($value);

Procedural Interface


secureblackbox_pop3client_get($res, 255 );


secureblackbox_pop3client_set($res, 255, $value );

Default Value

''

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (SecureBlackbox_POP3Client Class)

The local port number to bind the socket to.

Object Oriented Interface


public function getSocketLocalPort();


public function setSocketLocalPort($value);

Procedural Interface


secureblackbox_pop3client_get($res, 256 );


secureblackbox_pop3client_set($res, 256, $value );

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (SecureBlackbox_POP3Client Class)

The maximum number of bytes to write to the socket, per second.

Object Oriented Interface


public function getSocketOutgoingSpeedLimit();


public function setSocketOutgoingSpeedLimit($value);

Procedural Interface


secureblackbox_pop3client_get($res, 257 );


secureblackbox_pop3client_set($res, 257, $value );

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (SecureBlackbox_POP3Client Class)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Object Oriented Interface


public function getSocketTimeout();


public function setSocketTimeout($value);

Procedural Interface


secureblackbox_pop3client_get($res, 258 );


secureblackbox_pop3client_set($res, 258, $value );

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (SecureBlackbox_POP3Client Class)

Enables or disables IP protocol version 6.

Object Oriented Interface


public function getSocketUseIPv6();


public function setSocketUseIPv6($value);

Procedural Interface


secureblackbox_pop3client_get($res, 259 );


secureblackbox_pop3client_set($res, 259, $value );

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TLSAutoValidateCertificates Property (SecureBlackbox_POP3Client Class)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Object Oriented Interface


public function getTLSAutoValidateCertificates();


public function setTLSAutoValidateCertificates($value);

Procedural Interface


secureblackbox_pop3client_get($res, 260 );


secureblackbox_pop3client_set($res, 260, $value );

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (SecureBlackbox_POP3Client Class)

Selects the base configuration for the TLS settings.

Object Oriented Interface


public function getTLSBaseConfiguration();


public function setTLSBaseConfiguration($value);

Procedural Interface


secureblackbox_pop3client_get($res, 261 );


secureblackbox_pop3client_set($res, 261, $value );

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

Data Type

Integer

TLSCiphersuites Property (SecureBlackbox_POP3Client Class)

A list of ciphersuites separated with commas or semicolons.

Object Oriented Interface


public function getTLSCiphersuites();


public function setTLSCiphersuites($value);

Procedural Interface


secureblackbox_pop3client_get($res, 262 );


secureblackbox_pop3client_set($res, 262, $value );

Default Value

''

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (SecureBlackbox_POP3Client Class)

Defines the elliptic curves to enable.

Object Oriented Interface


public function getTLSECCurves();


public function setTLSECCurves($value);

Procedural Interface


secureblackbox_pop3client_get($res, 263 );


secureblackbox_pop3client_set($res, 263, $value );

Default Value

''

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (SecureBlackbox_POP3Client Class)

Provides access to TLS extensions.

Object Oriented Interface


public function getTLSExtensions();


public function setTLSExtensions($value);

Procedural Interface


secureblackbox_pop3client_get($res, 264 );


secureblackbox_pop3client_set($res, 264, $value );

Default Value

''

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (SecureBlackbox_POP3Client Class)

Whether to force TLS session resumption when the destination address changes.

Object Oriented Interface


public function getTLSForceResumeIfDestinationChanges();


public function setTLSForceResumeIfDestinationChanges($value);

Procedural Interface


secureblackbox_pop3client_get($res, 265 );


secureblackbox_pop3client_set($res, 265, $value );

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (SecureBlackbox_POP3Client Class)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Object Oriented Interface


public function getTLSPreSharedIdentity();


public function setTLSPreSharedIdentity($value);

Procedural Interface


secureblackbox_pop3client_get($res, 266 );


secureblackbox_pop3client_set($res, 266, $value );

Default Value

''

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (SecureBlackbox_POP3Client Class)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Object Oriented Interface


public function getTLSPreSharedKey();


public function setTLSPreSharedKey($value);

Procedural Interface


secureblackbox_pop3client_get($res, 267 );


secureblackbox_pop3client_set($res, 267, $value );

Default Value

''

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (SecureBlackbox_POP3Client Class)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Object Oriented Interface


public function getTLSPreSharedKeyCiphersuite();


public function setTLSPreSharedKeyCiphersuite($value);

Procedural Interface


secureblackbox_pop3client_get($res, 268 );


secureblackbox_pop3client_set($res, 268, $value );

Default Value

''

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (SecureBlackbox_POP3Client Class)

Selects the renegotiation attack prevention mechanism.

Object Oriented Interface


public function getTLSRenegotiationAttackPreventionMode();


public function setTLSRenegotiationAttackPreventionMode($value);

Procedural Interface


secureblackbox_pop3client_get($res, 269 );


secureblackbox_pop3client_set($res, 269, $value );

Default Value

0

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

Integer

TLSRevocationCheck Property (SecureBlackbox_POP3Client Class)

Specifies the kind(s) of revocation check to perform.

Object Oriented Interface


public function getTLSRevocationCheck();


public function setTLSRevocationCheck($value);

Procedural Interface


secureblackbox_pop3client_get($res, 270 );


secureblackbox_pop3client_set($res, 270, $value );

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (SecureBlackbox_POP3Client Class)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Object Oriented Interface


public function getTLSSSLOptions();


public function setTLSSSLOptions($value);

Procedural Interface


secureblackbox_pop3client_get($res, 271 );


secureblackbox_pop3client_set($res, 271, $value );

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add the server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send the handshake message as large batches rather than individually

Data Type

Integer

TLSTLSMode Property (SecureBlackbox_POP3Client Class)

Specifies the TLS mode to use.

Object Oriented Interface


public function getTLSTLSMode();


public function setTLSTLSMode($value);

Procedural Interface


secureblackbox_pop3client_get($res, 272 );


secureblackbox_pop3client_set($res, 272, $value );

Default Value

0

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, but allow plain data.

Data Type

Integer

TLSUseExtendedMasterSecret Property (SecureBlackbox_POP3Client Class)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Object Oriented Interface


public function getTLSUseExtendedMasterSecret();


public function setTLSUseExtendedMasterSecret($value);

Procedural Interface


secureblackbox_pop3client_get($res, 273 );


secureblackbox_pop3client_set($res, 273, $value );

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (SecureBlackbox_POP3Client Class)

Enables or disables the TLS session resumption capability.

Object Oriented Interface


public function getTLSUseSessionResumption();


public function setTLSUseSessionResumption($value);

Procedural Interface


secureblackbox_pop3client_get($res, 274 );


secureblackbox_pop3client_set($res, 274, $value );

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (SecureBlackbox_POP3Client Class)

The SSL/TLS versions to enable by default.

Object Oriented Interface


public function getTLSVersions();


public function setTLSVersions($value);

Procedural Interface


secureblackbox_pop3client_get($res, 275 );


secureblackbox_pop3client_set($res, 275, $value );

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Data Type

Integer

TrustedCertCount Property (SecureBlackbox_POP3Client Class)

The number of records in the TrustedCert arrays.

Object Oriented Interface


public function getTrustedCertCount();


public function setTrustedCertCount($value);

Procedural Interface


secureblackbox_pop3client_get($res, 276 );


secureblackbox_pop3client_set($res, 276, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (SecureBlackbox_POP3Client Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getTrustedCertBytes($trustedcertindex);


Procedural Interface


secureblackbox_pop3client_get($res, 277 , $trustedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (SecureBlackbox_POP3Client Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getTrustedCertHandle($trustedcertindex);


public function setTrustedCertHandle($trustedcertindex, $value);

Procedural Interface


secureblackbox_pop3client_get($res, 284 , $trustedcertindex);


secureblackbox_pop3client_set($res, 284, $value , $trustedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

Username Property (SecureBlackbox_POP3Client Class)

A username to authenticate to the POP3 server.

Object Oriented Interface


public function getUsername();


public function setUsername($value);

Procedural Interface


secureblackbox_pop3client_get($res, 311 );


secureblackbox_pop3client_set($res, 311, $value );

Default Value

''

Remarks

Use this property together with Password to provide authentication credentials to the component.

Data Type

String

Config Method (SecureBlackbox_POP3Client Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

secureblackbox_pop3client_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (SecureBlackbox_POP3Client Class)

Establishes connection to the POP3 server.

Object Oriented Interface

public function doConnect($address, $port);

Procedural Interface

secureblackbox_pop3client_do_connect($res, $address, $port);

Remarks

Use this method to establish connection to a POP3 server at Address and Port.

DeleteMessage Method (SecureBlackbox_POP3Client Class)

Deletes a message from the server-side mailbox.

Object Oriented Interface

public function doDeleteMessage($index);

Procedural Interface

secureblackbox_pop3client_do_deletemessage($res, $index);

Remarks

Call this method to delete a message from the mailbox.

Note that the message may not be deleted immediately. It is typical for POP3 servers to only mark messages for deletion upon receipt of this command, and only delete them after the connection has been gracefully closed.

If needed, messages can be "undeleted" during the same session by calling the Undelete method.

Disconnect Method (SecureBlackbox_POP3Client Class)

Closes connection to the POP3 server.

Object Oriented Interface

public function doDisconnect();

Procedural Interface

secureblackbox_pop3client_do_disconnect($res);

Remarks

Call this method to gracefully terminate the connection.

DoAction Method (SecureBlackbox_POP3Client Class)

Performs an additional action.

Object Oriented Interface

public function doDoAction($actionid, $actionparams);

Procedural Interface

secureblackbox_pop3client_do_doaction($res, $actionid, $actionparams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ListMessages Method (SecureBlackbox_POP3Client Class)

Queries a list of messages available on the server.

Object Oriented Interface

public function doListMessages();

Procedural Interface

secureblackbox_pop3client_do_listmessages($res);

Remarks

Use this method to request a list of messages currently available on the server. Use the Messages property to access the message details.

Ping Method (SecureBlackbox_POP3Client Class)

Sends a NOOP command to the POP3 server.

Object Oriented Interface

public function doPing();

Procedural Interface

secureblackbox_pop3client_do_ping($res);

Remarks

This method sends a NOOP command to the server, effectively pinging the server and keeping the connection alive.

ReceiveBytes Method (SecureBlackbox_POP3Client Class)

Downloads a message to a byte array.

Object Oriented Interface

public function doReceiveBytes($index);

Procedural Interface

secureblackbox_pop3client_do_receivebytes($res, $index);

Remarks

Use this method to download a server-side message to a byte array.

ReceiveFile Method (SecureBlackbox_POP3Client Class)

Downloads a message to a file.

Object Oriented Interface

public function doReceiveFile($index, $filename);

Procedural Interface

secureblackbox_pop3client_do_receivefile($res, $index, $filename);

Remarks

Use this method to download a server-side message to a local file.

ReceiveMessage Method (SecureBlackbox_POP3Client Class)

Downloads a message.

Object Oriented Interface

public function doReceiveMessage($index);

Procedural Interface

secureblackbox_pop3client_do_receivemessage($res, $index);

Remarks

Use this method to download a server-side message to the Message object.

Undelete Method (SecureBlackbox_POP3Client Class)

Undeletes messages marked for deletion.

Object Oriented Interface

public function doUndelete();

Procedural Interface

secureblackbox_pop3client_do_undelete($res);

Remarks

This method sends an RSET command, which tells the server to undelete all previously deleted messages by removing their 'delete' marks.

Note that this method only applies to messages deleted within the same session.

BeforeAuth Event (SecureBlackbox_POP3Client Class)

Fires before the authentication starts.

Object Oriented Interface

public function fireBeforeAuth($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 1, array($this, 'fireBeforeAuth'));

Parameter List


Remarks

The class fires this event when it has established the TCP connection and is ready to proceed to the user authentication step.

Command Event (SecureBlackbox_POP3Client Class)

Reports a command sent to the server.

Object Oriented Interface

public function fireCommand($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 2, array($this, 'fireCommand'));

Parameter List

 'cmd'

Remarks

The class fires this event whenever it sends a POP3 command to the server. Use CommandReply and CommandReplyData to track the server's responses.

CommandReply Event (SecureBlackbox_POP3Client Class)

Reports the receipt of a reply to a command.

Object Oriented Interface

public function fireCommandReply($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 3, array($this, 'fireCommandReply'));

Parameter List

 'cmd'
'reply'

Remarks

Use this event to track command replies sent in by the server. Use Command to track the commands sent out by the client, and CommandReplyData to access the reply data for commands that assume it.

CommandReplyData Event (SecureBlackbox_POP3Client Class)

Returns the data that accompanies a reply to a command.

Object Oriented Interface

public function fireCommandReplyData($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 4, array($this, 'fireCommandReplyData'));

Parameter List

 'cmd'
'data'

Remarks

Subscribe to this event to access data accompanying incoming command replies.

Error Event (SecureBlackbox_POP3Client Class)

Provides information about errors during POP3 operations.

Object Oriented Interface

public function fireError($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 5, array($this, 'fireError'));

Parameter List

 'errorcode'
'description'

Remarks

This event is fired in case of exceptional conditions occured during POP3 operations.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (SecureBlackbox_POP3Client Class)

Handles remote or external signing initiated by the SignExternal method or other source.

Object Oriented Interface

public function fireExternalSign($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 6, array($this, 'fireExternalSign'));

Parameter List

 'operationid'
'hashalgorithm'
'pars'
'data'
'signeddata'

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (SecureBlackbox_POP3Client Class)

This event notifies the application about an underlying control flow event.

Object Oriented Interface

public function fireNotification($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 7, array($this, 'fireNotification'));

Parameter List

 'eventid'
'eventparam'

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

Progress Event (SecureBlackbox_POP3Client Class)

Reports the progress of the data transfer operation.

Object Oriented Interface

public function fireProgress($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 8, array($this, 'fireProgress'));

Parameter List

 'total'
'current'
'cancel'

Remarks

The class fires this event repeatedly to report the progress of the data transfer operation.

TLSCertNeeded Event (SecureBlackbox_POP3Client Class)

Fires when a remote TLS party requests a client certificate.

Object Oriented Interface

public function fireTLSCertNeeded($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 9, array($this, 'fireTLSCertNeeded'));

Parameter List

 'host'
'canames'

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (SecureBlackbox_POP3Client Class)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Object Oriented Interface

public function fireTLSCertValidate($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 10, array($this, 'fireTLSCertValidate'));

Parameter List

 'serverhost'
'serverip'
'accept'

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

TLSEstablished Event (SecureBlackbox_POP3Client Class)

Fires when a TLS handshake with Host successfully completes.

Object Oriented Interface

public function fireTLSEstablished($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 11, array($this, 'fireTLSEstablished'));

Parameter List

 'host'
'version'
'ciphersuite'
'connectionid'
'abort'

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (SecureBlackbox_POP3Client Class)

Fires when a new TLS handshake is initiated, before the handshake commences.

Object Oriented Interface

public function fireTLSHandshake($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 12, array($this, 'fireTLSHandshake'));

Parameter List

 'host'
'abort'

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSPSK Event (SecureBlackbox_POP3Client Class)

Notifies the application about the PSK key exchange.

Object Oriented Interface

public function fireTLSPSK($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 13, array($this, 'fireTLSPSK'));

Parameter List

 'host'
'hint'

Remarks

The class fires this event to notify the application about the beginning of TLS-PSK key exchange with Host. The Hint parameter may be used by the server to identify the key or service to use. Use the PreSharedKey field of TLSSettings to provide the pre-shared key to the component.

TLSShutdown Event (SecureBlackbox_POP3Client Class)

Reports the graceful closure of a TLS connection.

Object Oriented Interface

public function fireTLSShutdown($param);

Procedural Interface

secureblackbox_pop3client_register_callback($res, 14, array($this, 'fireTLSShutdown'));

Parameter List

 'host'

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (POP3Client Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

POP3Client Config Settings

Authentications:   Specifies enabled authentication methods and their priorities.

Use this setting to enable or disable authentication methods and specify their priorities. The setting contains a comma-separated list of authentication methods. The first method in the list has the highest priority, and so on. The class will use the first method from the list which is supported by the server.

Supported methods: USER, APOP, CRAM-MD5, DIGEST-MD5, NTLM, GSSAPI, XOAUTH2, SCRAM-SHA-1, SCRAM-SHA-256

Default value: APOP,USER,DIGEST-MD5,CRAM-MD5,NTLM

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.

MaxLineLength:   Specifies maximum expected line length.

Use this setting to specify how long the expected mail line can be. Setting the very long value leads to memory increase. Default value is 10000. RFC 5322 requires that lines of up to 1000 characters long are handled correctly.

RequestUIDs:   Specifies whether to request message UIDs when listing messages.

Use this setting to enable or disable message UID requests.

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

  • CA, revocation source, TLS key usage requirements are not mandated
  • Violation of OCSP issuer requirements are ignored
  • The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
  • Basic constraints and name constraints of CA certificates are ignored
  • Some weaker algorithms are tolerated
UseMicrosoftCTL:   Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (POP3Client Class)

POP3Client Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)