MailReader Class

Properties   Methods   Events   Config Settings   Errors  

The MailReader class implements parsing and decryption of e-mail messages.

Class Name

SecureBlackbox_MailReader

Procedural Interface

 secureblackbox_mailreader_open();
 secureblackbox_mailreader_close($res);
 secureblackbox_mailreader_register_callback($res, $id, $function);
 secureblackbox_mailreader_get_last_error($res);
 secureblackbox_mailreader_get_last_error_code($res);
 secureblackbox_mailreader_set($res, $id, $index, $value);
 secureblackbox_mailreader_get($res, $id, $index);
 secureblackbox_mailreader_do_config($res, $configurationstring);
 secureblackbox_mailreader_do_doaction($res, $actionid, $actionparams);
 secureblackbox_mailreader_do_findattachment($res, $id);
 secureblackbox_mailreader_do_loadfrombytes($res, $messagebytes);
 secureblackbox_mailreader_do_loadfromfile($res, $filename);

Remarks

MailReader parses and decrypts e-mail messages, as well as verifies electronic signatures.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AttachCountThe number of records in the Attach arrays.
AttachContentSubtypeContains the content subtype of the attachment.
AttachContentTypeContains the content type of the attachment.
AttachCreationDateThe creation date.
AttachDataThe content of the attachment.
AttachDescriptionTextual description of the attachment.
AttachFilenameSpecifies the name of the attachment file.
AttachHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
AttachIDContains the attachment's unique identifier.
AttachModificationDateSpecifies the date and time of the file's last modification.
AttachReadDateSpecifies the file's last read date.
AttachSizeThe attachment's size in bytes.
BccAddrCountThe number of records in the BccAddr arrays.
BccAddrAddressContains the e-mail address in the form of john@doe.
BccAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
BccAddrGroupNameThe name of the group this address belongs to.
BlockedCertCountThe number of records in the BlockedCert arrays.
BlockedCertBytesReturns the raw certificate data in DER format.
BlockedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
CcAddrCountThe number of records in the CcAddr arrays.
CcAddrAddressContains the e-mail address in the form of john@doe.
CcAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
CcAddrGroupNameThe name of the group this address belongs to.
DecryptionCertBytesReturns the raw certificate data in DER format.
DecryptionCertCAIndicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).
DecryptionCertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
DecryptionCertCRLDistributionPointsLocations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
DecryptionCertCurveSpecifies the elliptic curve of the EC public key.
DecryptionCertFingerprintContains the fingerprint (a hash imprint) of this certificate.
DecryptionCertFriendlyNameContains an associated alias (friendly name) of the certificate.
DecryptionCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
DecryptionCertHashAlgorithmSpecifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
DecryptionCertIssuerThe common name of the certificate issuer (CA), typically a company name.
DecryptionCertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
DecryptionCertKeyAlgorithmSpecifies the public key algorithm of this certificate.
DecryptionCertKeyBitsReturns the length of the public key.
DecryptionCertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
DecryptionCertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
DecryptionCertKeyValidReturns True if the certificate's key is cryptographically valid, and False otherwise.
DecryptionCertOCSPLocationsLocations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
DecryptionCertOCSPNoCheckAccessor to the value of the certificate's ocsp-no-check extension.
DecryptionCertOriginReturns the origin of this certificate.
DecryptionCertPolicyIDsContains identifiers (OIDs) of the applicable certificate policies.
DecryptionCertPrivateKeyBytesContains the certificate's private key.
DecryptionCertPrivateKeyExistsIndicates whether the certificate has an associated private key.
DecryptionCertPrivateKeyExtractableIndicates whether the private key is extractable.
DecryptionCertPublicKeyBytesContains the certificate's public key in DER format.
DecryptionCertQualifiedStatementsReturns the qualified status of the certificate.
DecryptionCertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
DecryptionCertSerialNumberReturns the certificate's serial number.
DecryptionCertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
DecryptionCertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
DecryptionCertSubjectAlternativeNameReturns or sets the value of the Subject Alternative Name extension of the certificate.
DecryptionCertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
DecryptionCertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
DecryptionCertValidFromThe time point at which the certificate becomes valid, in UTC.
DecryptionCertValidToThe time point at which the certificate expires, in UTC.
ExternalCryptoAsyncDocumentIDSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
ExternalCryptoCustomParamsCustom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoDataAdditional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculationSpecifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithmSpecifies the request's signature hash algorithm.
ExternalCryptoKeyIDThe ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecretThe pre-shared key used for DC request authentication.
ExternalCryptoMethodSpecifies the asynchronous signing method.
ExternalCryptoModeSpecifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithmProvide the public key algorithm here if the certificate is not available on the pre-signing stage.
FIPSModeReserved.
FromAddrCountThe number of records in the FromAddr arrays.
FromAddrAddressContains the e-mail address in the form of john@doe.
FromAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
FromAddrGroupNameThe name of the group this address belongs to.
IgnoreChainValidationErrorsMakes the class tolerant to chain validation errors.
KnownCertCountThe number of records in the KnownCert arrays.
KnownCertBytesReturns the raw certificate data in DER format.
KnownCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownCRLCountThe number of records in the KnownCRL arrays.
KnownCRLBytesReturns the raw CRL data in DER format.
KnownCRLHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownOCSPCountThe number of records in the KnownOCSP arrays.
KnownOCSPBytesA buffer containing the raw OCSP response data.
KnownOCSPHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
MsgAttachmentCountReturns the number of attachments in this message.
MsgBccThe contents of the BCC header property.
MsgCcThe value of the CC header property.
MsgCommentsContains additional information about the message body.
MsgDateThe date and time when the message entered the mail delivery system.
MsgDeliveryReceiptEnables delivery notification.
MsgFromContains the value of the From header property.
MsgHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
MsgHtmlTextThe HTML version of the message.
MsgIDThe contents of the Message-ID header property.
MsgInReplyToThe value of the In-Reply-To header property.
MsgKeywordsThe value of the Keywords header property.
MsgMailerThe name of the software that was used to send the message.
MsgPlainTextThe plain text version of the message.
MsgPrioritySpecifies the message priority.
MsgReadReceiptEnables a read notification.
MsgReferencesThe value of the References header property.
MsgReplyToThe value of the Reply-To header property.
MsgReturnPathThe value of the Return-Path header property.
MsgSenderThe value of the Sender header property.
MsgSendToThe value of the To header property.
MsgSubjectContains the subject property of this message.
OfflineModeSwitches the class to offline mode.
HeaderFieldCountThe number of records in the HeaderField arrays.
HeaderFieldCategorySpecifies the string category of the contained value.
HeaderFieldFormatSpecifies the format (encoding) of the value contained in the Value property.
HeaderFieldNameThe name element in a (name, value) pair.
HeaderFieldValueThe value element in a (name, value) pair.
ProfileSpecifies a pre-defined profile to apply when creating the signature.
ProxyAddressThe IP address of the proxy server.
ProxyAuthenticationThe authentication type used by the proxy server.
ProxyPasswordThe password to authenticate to the proxy server.
ProxyPortThe port on the proxy server to connect to.
ProxyProxyTypeThe type of the proxy server.
ProxyRequestHeadersContains HTTP request headers for WebTunnel and HTTP proxy.
ProxyResponseBodyContains the HTTP or HTTPS (WebTunnel) proxy response body.
ProxyResponseHeadersContains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
ProxyUseIPv6Specifies whether IPv6 should be used when connecting through the proxy.
ProxyUseProxyEnables or disables proxy-driven connection.
ProxyUsernameSpecifies the username credential for proxy authentication.
ReplyToAddrCountThe number of records in the ReplyToAddr arrays.
ReplyToAddrAddressContains the e-mail address in the form of john@doe.
ReplyToAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
ReplyToAddrGroupNameThe name of the group this address belongs to.
RevocationCheckSpecifies the kind(s) of revocation check to perform for all chain certificates.
SecInfoChainValidationDetailsThe details of a certificate chain validation outcome.
SecInfoChainValidationResultThe outcome of a certificate chain validation routine.
SecInfoClaimedSigningTimeReturns the signature's claimed signing time.
SecInfoEncryptedIndicates whether the message is encrypted.
SecInfoEncryptionAlgorithmIndicates the algorithm that was used to encrypt the message.
SecInfoHashAlgorithmSpecifies the hash algorithm that was used to calculate the signature.
SecInfoSignatureValidationResultThe outcome of the cryptographic signature validation.
SecInfoSignedIndicates whether the message is signed.
SecInfoValidationLogContains the signing certificate's chain validation log.
SenderAddrAddressContains the e-mail address in the form of john@doe.
SenderAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
SenderAddrGroupNameThe name of the group this address belongs to.
SendToAddrCountThe number of records in the SendToAddr arrays.
SendToAddrAddressContains the e-mail address in the form of john@doe.
SendToAddrDisplayNameContains the friendly name of the user of this address, such as John Doe.
SendToAddrGroupNameThe name of the group this address belongs to.
SigningCertBytesReturns the raw certificate data in DER format.
SigningCertCAIndicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).
SigningCertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
SigningCertCRLDistributionPointsLocations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
SigningCertCurveSpecifies the elliptic curve of the EC public key.
SigningCertFingerprintContains the fingerprint (a hash imprint) of this certificate.
SigningCertFriendlyNameContains an associated alias (friendly name) of the certificate.
SigningCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
SigningCertHashAlgorithmSpecifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
SigningCertIssuerThe common name of the certificate issuer (CA), typically a company name.
SigningCertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
SigningCertKeyAlgorithmSpecifies the public key algorithm of this certificate.
SigningCertKeyBitsReturns the length of the public key.
SigningCertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
SigningCertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
SigningCertKeyValidReturns True if the certificate's key is cryptographically valid, and False otherwise.
SigningCertOCSPLocationsLocations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
SigningCertPolicyIDsContains identifiers (OIDs) of the applicable certificate policies.
SigningCertPublicKeyBytesContains the certificate's public key in DER format.
SigningCertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
SigningCertSerialNumberReturns the certificate's serial number.
SigningCertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
SigningCertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
SigningCertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
SigningCertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
SigningCertValidFromThe time point at which the certificate becomes valid, in UTC.
SigningCertValidToThe time point at which the certificate expires, in UTC.
SocketDNSModeSelects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
SocketDNSPortSpecifies the port number to be used for sending queries to the DNS server.
SocketDNSQueryTimeoutThe timeout (in milliseconds) for each DNS query.
SocketDNSServersThe addresses of DNS servers to use for address resolution, separated by commas or semicolons.
SocketDNSTotalTimeoutThe timeout (in milliseconds) for the whole resolution process.
SocketIncomingSpeedLimitThe maximum number of bytes to read from the socket, per second.
SocketLocalAddressThe local network interface to bind the socket to.
SocketLocalPortThe local port number to bind the socket to.
SocketOutgoingSpeedLimitThe maximum number of bytes to write to the socket, per second.
SocketTimeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
SocketUseIPv6Enables or disables IP protocol version 6.
TLSAutoValidateCertificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
TLSBaseConfigurationSelects the base configuration for the TLS settings.
TLSCiphersuitesA list of ciphersuites separated with commas or semicolons.
TLSECCurvesDefines the elliptic curves to enable.
TLSExtensionsProvides access to TLS extensions.
TLSForceResumeIfDestinationChangesWhether to force TLS session resumption when the destination address changes.
TLSPreSharedIdentityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
TLSPreSharedKeyContains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
TLSPreSharedKeyCiphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
TLSRenegotiationAttackPreventionModeSelects the renegotiation attack prevention mechanism.
TLSRevocationCheckSpecifies the kind(s) of revocation check to perform.
TLSSSLOptionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
TLSTLSModeSpecifies the TLS mode to use.
TLSUseExtendedMasterSecretEnables the Extended Master Secret Extension, as defined in RFC 7627.
TLSUseSessionResumptionEnables or disables the TLS session resumption capability.
TLSVersionsThe SSL/TLS versions to enable by default.
TrustedCertCountThe number of records in the TrustedCert arrays.
TrustedCertBytesReturns the raw certificate data in DER format.
TrustedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UsedCertCountThe number of records in the UsedCert arrays.
UsedCertBytesReturns the raw certificate data in DER format.
UsedCertCAIndicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).
UsedCertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
UsedCertCRLDistributionPointsLocations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.
UsedCertCurveSpecifies the elliptic curve of the EC public key.
UsedCertFingerprintContains the fingerprint (a hash imprint) of this certificate.
UsedCertFriendlyNameContains an associated alias (friendly name) of the certificate.
UsedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UsedCertHashAlgorithmSpecifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .
UsedCertIssuerThe common name of the certificate issuer (CA), typically a company name.
UsedCertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
UsedCertKeyAlgorithmSpecifies the public key algorithm of this certificate.
UsedCertKeyBitsReturns the length of the public key.
UsedCertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
UsedCertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
UsedCertKeyValidReturns True if the certificate's key is cryptographically valid, and False otherwise.
UsedCertOCSPLocationsLocations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.
UsedCertOCSPNoCheckAccessor to the value of the certificate's ocsp-no-check extension.
UsedCertOriginReturns the origin of this certificate.
UsedCertPolicyIDsContains identifiers (OIDs) of the applicable certificate policies.
UsedCertPrivateKeyBytesContains the certificate's private key.
UsedCertPrivateKeyExistsIndicates whether the certificate has an associated private key.
UsedCertPrivateKeyExtractableIndicates whether the private key is extractable.
UsedCertPublicKeyBytesContains the certificate's public key in DER format.
UsedCertQualifiedStatementsReturns the qualified status of the certificate.
UsedCertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
UsedCertSerialNumberReturns the certificate's serial number.
UsedCertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
UsedCertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
UsedCertSubjectAlternativeNameReturns or sets the value of the Subject Alternative Name extension of the certificate.
UsedCertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
UsedCertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
UsedCertValidFromThe time point at which the certificate becomes valid, in UTC.
UsedCertValidToThe time point at which the certificate expires, in UTC.
ValidationMomentThe time point at which signature validity is to be established.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
DoActionPerforms an additional action.
FindAttachmentLooks up a Message's attachment by its ID.
LoadFromBytesLoads an e-mail message from a byte array.
LoadFromFileLoads an e-mail message from a file.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ChainValidatedReports the completion of a certificate chain validation.
DecryptionInfoNeededAsks the application to provide a decryption certificate.
ErrorReports information about errors during e-mail message loading, parsing or saving.
ExternalDecryptHandles remote or external decryption.
NotificationThis event notifies the application about an underlying control flow event.
SignatureFoundSignifies the start of signature validation.
SignatureValidatedMarks the completion of the signature validation routine.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

GracePeriodSpecifies a grace period to apply during revocation information checks.
HeaderCharsetCharset of the header. If not empty, the one specified in the message header will be ignored.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
MaxHeaderSizeSpecifies the maximum mail message header size in bytes.
TempPathPath for storing temporary files.
TextCharsetCharset of text parts, if any. If not empty, the one specified in the message text parts will be ignored.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
UseMicrosoftCTLEnables or disables the automatic use of the Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AttachCount Property (SecureBlackbox_MailReader Class)

The number of records in the Attach arrays.

Object Oriented Interface


public function getAttachCount();


Procedural Interface


secureblackbox_mailreader_get($res, 1 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at AttachCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

AttachContentSubtype Property (SecureBlackbox_MailReader Class)

Contains the content subtype of the attachment.

Object Oriented Interface


public function getAttachContentSubtype($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 2 , $attachindex);


Default Value

''

Remarks

Contains the content subtype of the attachment.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachContentType Property (SecureBlackbox_MailReader Class)

Contains the content type of the attachment.

Object Oriented Interface


public function getAttachContentType($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 3 , $attachindex);


Default Value

''

Remarks

Contains the content type of the attachment.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachCreationDate Property (SecureBlackbox_MailReader Class)

The creation date.

Object Oriented Interface


public function getAttachCreationDate($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 4 , $attachindex);


Default Value

''

Remarks

The creation date.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachData Property (SecureBlackbox_MailReader Class)

The content of the attachment.

Object Oriented Interface


public function getAttachData($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 5 , $attachindex);


Remarks

The content of the attachment.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

AttachDescription Property (SecureBlackbox_MailReader Class)

Textual description of the attachment.

Object Oriented Interface


public function getAttachDescription($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 6 , $attachindex);


Default Value

''

Remarks

Textual description of the attachment.

This property maps to the Content-Description e-mail header field. Although the field is optional, the ability to associate descriptive information with a given body is often desirable. One example is specifying the title of an image using this property.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachFilename Property (SecureBlackbox_MailReader Class)

Specifies the name of the attachment file.

Object Oriented Interface


public function getAttachFilename($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 7 , $attachindex);


Default Value

''

Remarks

Specifies the name of the attachment file.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getAttachHandle($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 8 , $attachindex);


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

Long64

AttachID Property (SecureBlackbox_MailReader Class)

Contains the attachment's unique identifier.

Object Oriented Interface


public function getAttachID($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 9 , $attachindex);


Default Value

''

Remarks

Contains the attachment's unique identifier.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachModificationDate Property (SecureBlackbox_MailReader Class)

Specifies the date and time of the file's last modification.

Object Oriented Interface


public function getAttachModificationDate($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 10 , $attachindex);


Default Value

''

Remarks

Specifies the date and time of the file's last modification.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachReadDate Property (SecureBlackbox_MailReader Class)

Specifies the file's last read date.

Object Oriented Interface


public function getAttachReadDate($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 11 , $attachindex);


Default Value

''

Remarks

Specifies the file's last read date.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

String

AttachSize Property (SecureBlackbox_MailReader Class)

The attachment's size in bytes.

Object Oriented Interface


public function getAttachSize($attachindex);


Procedural Interface


secureblackbox_mailreader_get($res, 12 , $attachindex);


Default Value

0

Remarks

The attachment's size in bytes.

The $attachindex parameter specifies the index of the item in the array. The size of the array is controlled by the AttachCount property.

This property is read-only and not available at design time.

Data Type

Long64

BccAddrCount Property (SecureBlackbox_MailReader Class)

The number of records in the BccAddr arrays.

Object Oriented Interface


public function getBccAddrCount();


Procedural Interface


secureblackbox_mailreader_get($res, 13 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at BccAddrCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

BccAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getBccAddrAddress($bccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 14 , $bccaddrindex);


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

The $bccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the BccAddrCount property.

This property is read-only and not available at design time.

Data Type

String

BccAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getBccAddrDisplayName($bccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 15 , $bccaddrindex);


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

The $bccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the BccAddrCount property.

This property is read-only and not available at design time.

Data Type

String

BccAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getBccAddrGroupName($bccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 16 , $bccaddrindex);


Default Value

''

Remarks

The name of the group this address belongs to.

The $bccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the BccAddrCount property.

This property is read-only and not available at design time.

Data Type

String

BlockedCertCount Property (SecureBlackbox_MailReader Class)

The number of records in the BlockedCert arrays.

Object Oriented Interface


public function getBlockedCertCount();


public function setBlockedCertCount($value);

Procedural Interface


secureblackbox_mailreader_get($res, 17 );


secureblackbox_mailreader_set($res, 17, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getBlockedCertBytes($blockedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 18 , $blockedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getBlockedCertHandle($blockedcertindex);


public function setBlockedCertHandle($blockedcertindex, $value);

Procedural Interface


secureblackbox_mailreader_get($res, 25 , $blockedcertindex);


secureblackbox_mailreader_set($res, 25, $value , $blockedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $blockedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CcAddrCount Property (SecureBlackbox_MailReader Class)

The number of records in the CcAddr arrays.

Object Oriented Interface


public function getCcAddrCount();


Procedural Interface


secureblackbox_mailreader_get($res, 52 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at CcAddrCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CcAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getCcAddrAddress($ccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 53 , $ccaddrindex);


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

The $ccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the CcAddrCount property.

This property is read-only and not available at design time.

Data Type

String

CcAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getCcAddrDisplayName($ccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 54 , $ccaddrindex);


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

The $ccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the CcAddrCount property.

This property is read-only and not available at design time.

Data Type

String

CcAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getCcAddrGroupName($ccaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 55 , $ccaddrindex);


Default Value

''

Remarks

The name of the group this address belongs to.

The $ccaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the CcAddrCount property.

This property is read-only and not available at design time.

Data Type

String

DecryptionCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getDecryptionCertBytes();


Procedural Interface


secureblackbox_mailreader_get($res, 56 );


Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertCA Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Object Oriented Interface


public function getDecryptionCertCA();


public function setDecryptionCertCA($value);

Procedural Interface


secureblackbox_mailreader_get($res, 57 );


secureblackbox_mailreader_set($res, 57, $value );

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

This property is not available at design time.

Data Type

Boolean

DecryptionCertCAKeyID Property (SecureBlackbox_MailReader Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface


public function getDecryptionCertCAKeyID();


Procedural Interface


secureblackbox_mailreader_get($res, 58 );


Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertCRLDistributionPoints Property (SecureBlackbox_MailReader Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Object Oriented Interface


public function getDecryptionCertCRLDistributionPoints();


public function setDecryptionCertCRLDistributionPoints($value);

Procedural Interface


secureblackbox_mailreader_get($res, 59 );


secureblackbox_mailreader_set($res, 59, $value );

Default Value

''

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is not available at design time.

Data Type

String

DecryptionCertCurve Property (SecureBlackbox_MailReader Class)

Specifies the elliptic curve of the EC public key.

Object Oriented Interface


public function getDecryptionCertCurve();


public function setDecryptionCertCurve($value);

Procedural Interface


secureblackbox_mailreader_get($res, 60 );


secureblackbox_mailreader_set($res, 60, $value );

Default Value

''

Remarks

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

This property is not available at design time.

Data Type

String

DecryptionCertFingerprint Property (SecureBlackbox_MailReader Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface


public function getDecryptionCertFingerprint();


Procedural Interface


secureblackbox_mailreader_get($res, 61 );


Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertFriendlyName Property (SecureBlackbox_MailReader Class)

Contains an associated alias (friendly name) of the certificate.

Object Oriented Interface


public function getDecryptionCertFriendlyName();


Procedural Interface


secureblackbox_mailreader_get($res, 62 );


Default Value

''

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

DecryptionCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getDecryptionCertHandle();


public function setDecryptionCertHandle($value);

Procedural Interface


secureblackbox_mailreader_get($res, 63 );


secureblackbox_mailreader_set($res, 63, $value );

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is not available at design time.

Data Type

Long64

DecryptionCertHashAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Object Oriented Interface


public function getDecryptionCertHashAlgorithm();


public function setDecryptionCertHashAlgorithm($value);

Procedural Interface


secureblackbox_mailreader_get($res, 64 );


secureblackbox_mailreader_set($res, 64, $value );

Default Value

''

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

This property is not available at design time.

Data Type

String

DecryptionCertIssuer Property (SecureBlackbox_MailReader Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface


public function getDecryptionCertIssuer();


Procedural Interface


secureblackbox_mailreader_get($res, 65 );


Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

DecryptionCertIssuerRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface


public function getDecryptionCertIssuerRDN();


public function setDecryptionCertIssuerRDN($value);

Procedural Interface


secureblackbox_mailreader_get($res, 66 );


secureblackbox_mailreader_set($res, 66, $value );

Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is not available at design time.

Data Type

String

DecryptionCertKeyAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface


public function getDecryptionCertKeyAlgorithm();


public function setDecryptionCertKeyAlgorithm($value);

Procedural Interface


secureblackbox_mailreader_get($res, 67 );


secureblackbox_mailreader_set($res, 67, $value );

Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

This property is not available at design time.

Data Type

String

DecryptionCertKeyBits Property (SecureBlackbox_MailReader Class)

Returns the length of the public key.

Object Oriented Interface


public function getDecryptionCertKeyBits();


Procedural Interface


secureblackbox_mailreader_get($res, 68 );


Default Value

0

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

DecryptionCertKeyFingerprint Property (SecureBlackbox_MailReader Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface


public function getDecryptionCertKeyFingerprint();


Procedural Interface


secureblackbox_mailreader_get($res, 69 );


Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertKeyUsage Property (SecureBlackbox_MailReader Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface


public function getDecryptionCertKeyUsage();


public function setDecryptionCertKeyUsage($value);

Procedural Interface


secureblackbox_mailreader_get($res, 70 );


secureblackbox_mailreader_set($res, 70, $value );

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

This property is not available at design time.

Data Type

Integer

DecryptionCertKeyValid Property (SecureBlackbox_MailReader Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Object Oriented Interface


public function getDecryptionCertKeyValid();


Procedural Interface


secureblackbox_mailreader_get($res, 71 );


Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

DecryptionCertOCSPLocations Property (SecureBlackbox_MailReader Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Object Oriented Interface


public function getDecryptionCertOCSPLocations();


public function setDecryptionCertOCSPLocations($value);

Procedural Interface


secureblackbox_mailreader_get($res, 72 );


secureblackbox_mailreader_set($res, 72, $value );

Default Value

''

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is not available at design time.

Data Type

String

DecryptionCertOCSPNoCheck Property (SecureBlackbox_MailReader Class)

Accessor to the value of the certificate's ocsp-no-check extension.

Object Oriented Interface


public function getDecryptionCertOCSPNoCheck();


public function setDecryptionCertOCSPNoCheck($value);

Procedural Interface


secureblackbox_mailreader_get($res, 73 );


secureblackbox_mailreader_set($res, 73, $value );

Default Value

false

Remarks

Accessor to the value of the certificate's ocsp-no-check extension.

This property is not available at design time.

Data Type

Boolean

DecryptionCertOrigin Property (SecureBlackbox_MailReader Class)

Returns the origin of this certificate.

Object Oriented Interface


public function getDecryptionCertOrigin();


Procedural Interface


secureblackbox_mailreader_get($res, 74 );


Default Value

0

Remarks

Returns the origin of this certificate.

This property is read-only and not available at design time.

Data Type

Integer

DecryptionCertPolicyIDs Property (SecureBlackbox_MailReader Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Object Oriented Interface


public function getDecryptionCertPolicyIDs();


public function setDecryptionCertPolicyIDs($value);

Procedural Interface


secureblackbox_mailreader_get($res, 75 );


secureblackbox_mailreader_set($res, 75, $value );

Default Value

''

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is not available at design time.

Data Type

String

DecryptionCertPrivateKeyBytes Property (SecureBlackbox_MailReader Class)

Contains the certificate's private key.

Object Oriented Interface


public function getDecryptionCertPrivateKeyBytes();


Procedural Interface


secureblackbox_mailreader_get($res, 76 );


Remarks

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertPrivateKeyExists Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate has an associated private key.

Object Oriented Interface


public function getDecryptionCertPrivateKeyExists();


Procedural Interface


secureblackbox_mailreader_get($res, 77 );


Default Value

false

Remarks

Indicates whether the certificate has an associated private key.

This property is read-only and not available at design time.

Data Type

Boolean

DecryptionCertPrivateKeyExtractable Property (SecureBlackbox_MailReader Class)

Indicates whether the private key is extractable.

Object Oriented Interface


public function getDecryptionCertPrivateKeyExtractable();


Procedural Interface


secureblackbox_mailreader_get($res, 78 );


Default Value

false

Remarks

Indicates whether the private key is extractable.

This property is read-only and not available at design time.

Data Type

Boolean

DecryptionCertPublicKeyBytes Property (SecureBlackbox_MailReader Class)

Contains the certificate's public key in DER format.

Object Oriented Interface


public function getDecryptionCertPublicKeyBytes();


Procedural Interface


secureblackbox_mailreader_get($res, 79 );


Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

DecryptionCertQualifiedStatements Property (SecureBlackbox_MailReader Class)

Returns the qualified status of the certificate.

Object Oriented Interface


public function getDecryptionCertQualifiedStatements();


public function setDecryptionCertQualifiedStatements($value);

Procedural Interface


secureblackbox_mailreader_get($res, 80 );


secureblackbox_mailreader_set($res, 80, $value );

Default Value

0

Remarks

Returns the qualified status of the certificate.

This property is not available at design time.

Data Type

Integer

DecryptionCertSelfSigned Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface


public function getDecryptionCertSelfSigned();


Procedural Interface


secureblackbox_mailreader_get($res, 81 );


Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

DecryptionCertSerialNumber Property (SecureBlackbox_MailReader Class)

Returns the certificate's serial number.

Object Oriented Interface


public function getDecryptionCertSerialNumber();


public function setDecryptionCertSerialNumber($value);

Procedural Interface


secureblackbox_mailreader_get($res, 82 );


secureblackbox_mailreader_set($res, 82, $value );

Remarks

Returns the certificate's serial number.

This property is not available at design time.

Data Type

Byte Array

DecryptionCertSigAlgorithm Property (SecureBlackbox_MailReader Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface


public function getDecryptionCertSigAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 83 );


Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

DecryptionCertSubject Property (SecureBlackbox_MailReader Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface


public function getDecryptionCertSubject();


Procedural Interface


secureblackbox_mailreader_get($res, 84 );


Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

DecryptionCertSubjectAlternativeName Property (SecureBlackbox_MailReader Class)

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Object Oriented Interface


public function getDecryptionCertSubjectAlternativeName();


public function setDecryptionCertSubjectAlternativeName($value);

Procedural Interface


secureblackbox_mailreader_get($res, 85 );


secureblackbox_mailreader_set($res, 85, $value );

Default Value

''

Remarks

Returns or sets the value of the Subject Alternative Name extension of the certificate.

This property is not available at design time.

Data Type

String

DecryptionCertSubjectKeyID Property (SecureBlackbox_MailReader Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface


public function getDecryptionCertSubjectKeyID();


public function setDecryptionCertSubjectKeyID($value);

Procedural Interface


secureblackbox_mailreader_get($res, 86 );


secureblackbox_mailreader_set($res, 86, $value );

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

This property is not available at design time.

Data Type

Byte Array

DecryptionCertSubjectRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface


public function getDecryptionCertSubjectRDN();


public function setDecryptionCertSubjectRDN($value);

Procedural Interface


secureblackbox_mailreader_get($res, 87 );


secureblackbox_mailreader_set($res, 87, $value );

Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is not available at design time.

Data Type

String

DecryptionCertValidFrom Property (SecureBlackbox_MailReader Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface


public function getDecryptionCertValidFrom();


public function setDecryptionCertValidFrom($value);

Procedural Interface


secureblackbox_mailreader_get($res, 88 );


secureblackbox_mailreader_set($res, 88, $value );

Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is not available at design time.

Data Type

String

DecryptionCertValidTo Property (SecureBlackbox_MailReader Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface


public function getDecryptionCertValidTo();


public function setDecryptionCertValidTo($value);

Procedural Interface


secureblackbox_mailreader_get($res, 89 );


secureblackbox_mailreader_set($res, 89, $value );

Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

This property is not available at design time.

Data Type

String

ExternalCryptoAsyncDocumentID Property (SecureBlackbox_MailReader Class)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Object Oriented Interface


public function getExternalCryptoAsyncDocumentID();


public function setExternalCryptoAsyncDocumentID($value);

Procedural Interface


secureblackbox_mailreader_get($res, 90 );


secureblackbox_mailreader_set($res, 90, $value );

Default Value

''

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (SecureBlackbox_MailReader Class)

Custom parameters to be passed to the signing service (uninterpreted).

Object Oriented Interface


public function getExternalCryptoCustomParams();


public function setExternalCryptoCustomParams($value);

Procedural Interface


secureblackbox_mailreader_get($res, 91 );


secureblackbox_mailreader_set($res, 91, $value );

Default Value

''

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (SecureBlackbox_MailReader Class)

Additional data to be included in the async state and mirrored back by the requestor.

Object Oriented Interface


public function getExternalCryptoData();


public function setExternalCryptoData($value);

Procedural Interface


secureblackbox_mailreader_get($res, 92 );


secureblackbox_mailreader_set($res, 92, $value );

Default Value

''

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (SecureBlackbox_MailReader Class)

Specifies whether the message hash is to be calculated at the external endpoint.

Object Oriented Interface


public function getExternalCryptoExternalHashCalculation();


public function setExternalCryptoExternalHashCalculation($value);

Procedural Interface


secureblackbox_mailreader_get($res, 93 );


secureblackbox_mailreader_set($res, 93, $value );

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the request's signature hash algorithm.

Object Oriented Interface


public function getExternalCryptoHashAlgorithm();


public function setExternalCryptoHashAlgorithm($value);

Procedural Interface


secureblackbox_mailreader_get($res, 94 );


secureblackbox_mailreader_set($res, 94, $value );

Default Value

'SHA256'

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Data Type

String

ExternalCryptoKeyID Property (SecureBlackbox_MailReader Class)

The ID of the pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeyID();


public function setExternalCryptoKeyID($value);

Procedural Interface


secureblackbox_mailreader_get($res, 95 );


secureblackbox_mailreader_set($res, 95, $value );

Default Value

''

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (SecureBlackbox_MailReader Class)

The pre-shared key used for DC request authentication.

Object Oriented Interface


public function getExternalCryptoKeySecret();


public function setExternalCryptoKeySecret($value);

Procedural Interface


secureblackbox_mailreader_get($res, 96 );


secureblackbox_mailreader_set($res, 96, $value );

Default Value

''

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (SecureBlackbox_MailReader Class)

Specifies the asynchronous signing method.

Object Oriented Interface


public function getExternalCryptoMethod();


public function setExternalCryptoMethod($value);

Procedural Interface


secureblackbox_mailreader_get($res, 97 );


secureblackbox_mailreader_set($res, 97, $value );

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Data Type

Integer

ExternalCryptoMode Property (SecureBlackbox_MailReader Class)

Specifies the external cryptography mode.

Object Oriented Interface


public function getExternalCryptoMode();


public function setExternalCryptoMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 98 );


secureblackbox_mailreader_set($res, 98, $value );

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with the OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (SecureBlackbox_MailReader Class)

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Object Oriented Interface


public function getExternalCryptoPublicKeyAlgorithm();


public function setExternalCryptoPublicKeyAlgorithm($value);

Procedural Interface


secureblackbox_mailreader_get($res, 99 );


secureblackbox_mailreader_set($res, 99, $value );

Default Value

''

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Data Type

String

FIPSMode Property (SecureBlackbox_MailReader Class)

Reserved.

Object Oriented Interface


public function getFIPSMode();


public function setFIPSMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 100 );


secureblackbox_mailreader_set($res, 100, $value );

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

FromAddrCount Property (SecureBlackbox_MailReader Class)

The number of records in the FromAddr arrays.

Object Oriented Interface


public function getFromAddrCount();


Procedural Interface


secureblackbox_mailreader_get($res, 101 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at FromAddrCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

FromAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getFromAddrAddress($fromaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 102 , $fromaddrindex);


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

The $fromaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the FromAddrCount property.

This property is read-only and not available at design time.

Data Type

String

FromAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getFromAddrDisplayName($fromaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 103 , $fromaddrindex);


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

The $fromaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the FromAddrCount property.

This property is read-only and not available at design time.

Data Type

String

FromAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getFromAddrGroupName($fromaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 104 , $fromaddrindex);


Default Value

''

Remarks

The name of the group this address belongs to.

The $fromaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the FromAddrCount property.

This property is read-only and not available at design time.

Data Type

String

IgnoreChainValidationErrors Property (SecureBlackbox_MailReader Class)

Makes the class tolerant to chain validation errors.

Object Oriented Interface


public function getIgnoreChainValidationErrors();


public function setIgnoreChainValidationErrors($value);

Procedural Interface


secureblackbox_mailreader_get($res, 105 );


secureblackbox_mailreader_set($res, 105, $value );

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

KnownCertCount Property (SecureBlackbox_MailReader Class)

The number of records in the KnownCert arrays.

Object Oriented Interface


public function getKnownCertCount();


public function setKnownCertCount($value);

Procedural Interface


secureblackbox_mailreader_get($res, 106 );


secureblackbox_mailreader_set($res, 106, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getKnownCertBytes($knowncertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 107 , $knowncertindex);


Remarks

Returns the raw certificate data in DER format.

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCertHandle($knowncertindex);


public function setKnownCertHandle($knowncertindex, $value);

Procedural Interface


secureblackbox_mailreader_get($res, 114 , $knowncertindex);


secureblackbox_mailreader_set($res, 114, $value , $knowncertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncertindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (SecureBlackbox_MailReader Class)

The number of records in the KnownCRL arrays.

Object Oriented Interface


public function getKnownCRLCount();


public function setKnownCRLCount($value);

Procedural Interface


secureblackbox_mailreader_get($res, 141 );


secureblackbox_mailreader_set($res, 141, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (SecureBlackbox_MailReader Class)

Returns the raw CRL data in DER format.

Object Oriented Interface


public function getKnownCRLBytes($knowncrlindex);


Procedural Interface


secureblackbox_mailreader_get($res, 142 , $knowncrlindex);


Remarks

Returns the raw CRL data in DER format.

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownCRLHandle($knowncrlindex);


public function setKnownCRLHandle($knowncrlindex, $value);

Procedural Interface


secureblackbox_mailreader_get($res, 145 , $knowncrlindex);


secureblackbox_mailreader_set($res, 145, $value , $knowncrlindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knowncrlindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (SecureBlackbox_MailReader Class)

The number of records in the KnownOCSP arrays.

Object Oriented Interface


public function getKnownOCSPCount();


public function setKnownOCSPCount($value);

Procedural Interface


secureblackbox_mailreader_get($res, 153 );


secureblackbox_mailreader_set($res, 153, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (SecureBlackbox_MailReader Class)

A buffer containing the raw OCSP response data.

Object Oriented Interface


public function getKnownOCSPBytes($knownocspindex);


Procedural Interface


secureblackbox_mailreader_get($res, 154 , $knownocspindex);


Remarks

A buffer containing the raw OCSP response data.

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getKnownOCSPHandle($knownocspindex);


public function setKnownOCSPHandle($knownocspindex, $value);

Procedural Interface


secureblackbox_mailreader_get($res, 156 , $knownocspindex);


secureblackbox_mailreader_set($res, 156, $value , $knownocspindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $knownocspindex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

MsgAttachmentCount Property (SecureBlackbox_MailReader Class)

Returns the number of attachments in this message.

Object Oriented Interface


public function getMsgAttachmentCount();


Procedural Interface


secureblackbox_mailreader_get($res, 161 );


Default Value

0

Remarks

Returns the number of attachments in this message.

This property is read-only and not available at design time.

Data Type

Integer

MsgBcc Property (SecureBlackbox_MailReader Class)

The contents of the BCC header property.

Object Oriented Interface


public function getMsgBcc();


public function setMsgBcc($value);

Procedural Interface


secureblackbox_mailreader_get($res, 162 );


secureblackbox_mailreader_set($res, 162, $value );

Default Value

''

Remarks

The contents of the BCC header field.

The BCC header field contains the addresses of secondary recipients of the message whose addresses are not to be revealed to other recipients of the message. Mail servers remove the BCC header when processing the message and use its value for dispatching the message only.

This property is not available at design time.

Data Type

String

MsgCc Property (SecureBlackbox_MailReader Class)

The value of the CC header property.

Object Oriented Interface


public function getMsgCc();


public function setMsgCc($value);

Procedural Interface


secureblackbox_mailreader_get($res, 163 );


secureblackbox_mailreader_set($res, 163, $value );

Default Value

''

Remarks

The value of the CC header field.

The CC field contains the addresses of secondary recipients of the message.

This property is not available at design time.

Data Type

String

MsgComments Property (SecureBlackbox_MailReader Class)

Contains additional information about the message body.

Object Oriented Interface


public function getMsgComments();


public function setMsgComments($value);

Procedural Interface


secureblackbox_mailreader_get($res, 164 );


secureblackbox_mailreader_set($res, 164, $value );

Default Value

''

Remarks

Contains additional information about the message body.

This property is not available at design time.

Data Type

String

MsgDate Property (SecureBlackbox_MailReader Class)

The date and time when the message entered the mail delivery system.

Object Oriented Interface


public function getMsgDate();


public function setMsgDate($value);

Procedural Interface


secureblackbox_mailreader_get($res, 165 );


secureblackbox_mailreader_set($res, 165, $value );

Default Value

''

Remarks

The date and time when the message entered the mail delivery system.

This field contains the date and time at which the creator of the message posted the message to the mail delivery system.

The date is returned and accepted in UTC time zone.

This property is not available at design time.

Data Type

String

MsgDeliveryReceipt Property (SecureBlackbox_MailReader Class)

Enables delivery notification.

Object Oriented Interface


public function getMsgDeliveryReceipt();


public function setMsgDeliveryReceipt($value);

Procedural Interface


secureblackbox_mailreader_get($res, 166 );


secureblackbox_mailreader_set($res, 166, $value );

Default Value

false

Remarks

Enables delivery notification.

This property is not available at design time.

Data Type

Boolean

MsgFrom Property (SecureBlackbox_MailReader Class)

Contains the value of the From header property.

Object Oriented Interface


public function getMsgFrom();


public function setMsgFrom($value);

Procedural Interface


secureblackbox_mailreader_get($res, 167 );


secureblackbox_mailreader_set($res, 167, $value );

Default Value

''

Remarks

Contains the value of the From header field.

This field contains the address(es) of the message author(s). If the actual sender is not the author of the message, use MsgSender to specify the sender separately.

This property is not available at design time.

Data Type

String

MsgHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getMsgHandle();


public function setMsgHandle($value);

Procedural Interface


secureblackbox_mailreader_get($res, 168 );


secureblackbox_mailreader_set($res, 168, $value );

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is not available at design time.

Data Type

Long64

MsgHtmlText Property (SecureBlackbox_MailReader Class)

The HTML version of the message.

Object Oriented Interface


public function getMsgHtmlText();


public function setMsgHtmlText($value);

Procedural Interface


secureblackbox_mailreader_get($res, 169 );


secureblackbox_mailreader_set($res, 169, $value );

Default Value

''

Remarks

The HTML version of the message.

This property is not available at design time.

Data Type

String

MsgID Property (SecureBlackbox_MailReader Class)

The contents of the Message-ID header property.

Object Oriented Interface


public function getMsgID();


public function setMsgID($value);

Procedural Interface


secureblackbox_mailreader_get($res, 170 );


secureblackbox_mailreader_set($res, 170, $value );

Default Value

''

Remarks

The contents of the Message-ID header field.

This field contains a unique identifier that refers to a particular version of this message.

This property is not available at design time.

Data Type

String

MsgInReplyTo Property (SecureBlackbox_MailReader Class)

The value of the In-Reply-To header property.

Object Oriented Interface


public function getMsgInReplyTo();


public function setMsgInReplyTo($value);

Procedural Interface


secureblackbox_mailreader_get($res, 171 );


secureblackbox_mailreader_set($res, 171, $value );

Default Value

''

Remarks

The value of the In-Reply-To header field.

A reply message should have the "In-Reply-To:" header field which may be used to identify the message (or messages) to which the new message is a reply.

This property is not available at design time.

Data Type

String

MsgKeywords Property (SecureBlackbox_MailReader Class)

The value of the Keywords header property.

Object Oriented Interface


public function getMsgKeywords();


public function setMsgKeywords($value);

Procedural Interface


secureblackbox_mailreader_get($res, 172 );


secureblackbox_mailreader_set($res, 172, $value );

Default Value

''

Remarks

The value of the Keywords header field.

This field can be used to add some important words and phrases that might be useful for the recipient.

This property is not available at design time.

Data Type

String

MsgMailer Property (SecureBlackbox_MailReader Class)

The name of the software that was used to send the message.

Object Oriented Interface


public function getMsgMailer();


Procedural Interface


secureblackbox_mailreader_get($res, 173 );


Default Value

''

Remarks

The name of the software that was used to send the message.

This property is read-only and not available at design time.

Data Type

String

MsgPlainText Property (SecureBlackbox_MailReader Class)

The plain text version of the message.

Object Oriented Interface


public function getMsgPlainText();


public function setMsgPlainText($value);

Procedural Interface


secureblackbox_mailreader_get($res, 174 );


secureblackbox_mailreader_set($res, 174, $value );

Default Value

''

Remarks

The plain text version of the message.

This property is not available at design time.

Data Type

String

MsgPriority Property (SecureBlackbox_MailReader Class)

Specifies the message priority.

Object Oriented Interface


public function getMsgPriority();


public function setMsgPriority($value);

Procedural Interface


secureblackbox_mailreader_get($res, 175 );


secureblackbox_mailreader_set($res, 175, $value );

Default Value

2

Remarks

Specifies the message priority.

Available options:

mpLowest0
mpLow1
mpNormal2
mpHigh3
mpHighest4

This property is not available at design time.

Data Type

Integer

MsgReadReceipt Property (SecureBlackbox_MailReader Class)

Enables a read notification.

Object Oriented Interface


public function getMsgReadReceipt();


public function setMsgReadReceipt($value);

Procedural Interface


secureblackbox_mailreader_get($res, 176 );


secureblackbox_mailreader_set($res, 176, $value );

Default Value

false

Remarks

Enables a read notification.

This property is not available at design time.

Data Type

Boolean

MsgReferences Property (SecureBlackbox_MailReader Class)

The value of the References header property.

Object Oriented Interface


public function getMsgReferences();


public function setMsgReferences($value);

Procedural Interface


secureblackbox_mailreader_get($res, 177 );


secureblackbox_mailreader_set($res, 177, $value );

Default Value

''

Remarks

The value of the References header field.

A reply message should include a "References:" header field which may be used to identify the "conversation thread". If the initial message is a reply itself, the References of the reply contain combined content of its "References:", "InReplyTo:" and "MessageID:" fields, subject to their presence in the original message.

This property is not available at design time.

Data Type

String

MsgReplyTo Property (SecureBlackbox_MailReader Class)

The value of the Reply-To header property.

Object Oriented Interface


public function getMsgReplyTo();


public function setMsgReplyTo($value);

Procedural Interface


secureblackbox_mailreader_get($res, 178 );


secureblackbox_mailreader_set($res, 178, $value );

Default Value

''

Remarks

The value of the Reply-To header field.

This field contains the addresses to which the replies to this message should be sent. This field is optional. If not specified, the replies must be sent to the addresses specified in the MsgFrom field.

This property is not available at design time.

Data Type

String

MsgReturnPath Property (SecureBlackbox_MailReader Class)

The value of the Return-Path header property.

Object Oriented Interface


public function getMsgReturnPath();


public function setMsgReturnPath($value);

Procedural Interface


secureblackbox_mailreader_get($res, 179 );


secureblackbox_mailreader_set($res, 179, $value );

Default Value

''

Remarks

The value of the Return-Path header field.

This field contains the address to which this message shall be returned in case of unsuccessful delivery.

This property is not available at design time.

Data Type

String

MsgSender Property (SecureBlackbox_MailReader Class)

The value of the Sender header property.

Object Oriented Interface


public function getMsgSender();


public function setMsgSender($value);

Procedural Interface


secureblackbox_mailreader_get($res, 180 );


secureblackbox_mailreader_set($res, 180, $value );

Default Value

''

Remarks

The value of the Sender header field.

This field specifies the mailbox of the agent responsible for the actual transmission of this message. If the originator of the message can be indicated by a single mailbox and both the author and the transmitter are identical, the "Sender:" field is deemed excessive and should not be used.

This property is not available at design time.

Data Type

String

MsgSendTo Property (SecureBlackbox_MailReader Class)

The value of the To header property.

Object Oriented Interface


public function getMsgSendTo();


public function setMsgSendTo($value);

Procedural Interface


secureblackbox_mailreader_get($res, 181 );


secureblackbox_mailreader_set($res, 181, $value );

Default Value

''

Remarks

The value of the To header field.

This field specifies the address(es) of the primary recipient(s) of the message.

This property is not available at design time.

Data Type

String

MsgSubject Property (SecureBlackbox_MailReader Class)

Contains the subject property of this message.

Object Oriented Interface


public function getMsgSubject();


public function setMsgSubject($value);

Procedural Interface


secureblackbox_mailreader_get($res, 182 );


secureblackbox_mailreader_set($res, 182, $value );

Default Value

''

Remarks

Contains the subject field of this message.

This property is not available at design time.

Data Type

String

OfflineMode Property (SecureBlackbox_MailReader Class)

Switches the class to offline mode.

Object Oriented Interface


public function getOfflineMode();


public function setOfflineMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 183 );


secureblackbox_mailreader_set($res, 183, $value );

Default Value

false

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

HeaderFieldCount Property (SecureBlackbox_MailReader Class)

The number of records in the HeaderField arrays.

Object Oriented Interface


public function getHeaderFieldCount();


Procedural Interface


secureblackbox_mailreader_get($res, 184 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at HeaderFieldCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

HeaderFieldCategory Property (SecureBlackbox_MailReader Class)

Specifies the string category of the contained value.

Object Oriented Interface


public function getHeaderFieldCategory($headerfieldindex);


Procedural Interface


secureblackbox_mailreader_get($res, 185 , $headerfieldindex);


Default Value

''

Remarks

Specifies the string category of the contained value.

This property allows to check or set the category (or type) associated with the contained value. Depending on the format used to load or save the string, the category parameter may or may not be used.

For example, for ASN.1 property lists the category contains the ASN.1 tag of the contained data (OCTETSTRING, UTF8STRING, INTEGER, ...). For basic (name, value) pairs, such as HTTP headers, the category parameter is not used.

The $headerfieldindex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderFieldCount property.

This property is read-only and not available at design time.

Data Type

String

HeaderFieldFormat Property (SecureBlackbox_MailReader Class)

Specifies the format (encoding) of the value contained in the Value property.

Object Oriented Interface


public function getHeaderFieldFormat($headerfieldindex);


Procedural Interface


secureblackbox_mailreader_get($res, 186 , $headerfieldindex);


Default Value

0

Remarks

Specifies the format (encoding) of the value contained in the HeaderFieldValue property.

Use this property to check or set the format of the contained value. Remember to provide the actual value in the appropriate format that matches this setting: utils.NameValuePairs[0].Name = "key"; utils.NameValuePairs[0].Format = svfBinary; utils.NameValuePairs[0].Name = "0a1b2c3d4e5f6071";

The following formats are currently supported:

svfText0The property contains text

svfBinary1The property contains binary data. The Value property contains a hex encoding of it.

The $headerfieldindex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderFieldCount property.

This property is read-only and not available at design time.

Data Type

Integer

HeaderFieldName Property (SecureBlackbox_MailReader Class)

The name element in a (name, value) pair.

Object Oriented Interface


public function getHeaderFieldName($headerfieldindex);


Procedural Interface


secureblackbox_mailreader_get($res, 187 , $headerfieldindex);


Default Value

''

Remarks

The name element in a (name, value) pair.

The $headerfieldindex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderFieldCount property.

This property is read-only and not available at design time.

Data Type

String

HeaderFieldValue Property (SecureBlackbox_MailReader Class)

The value element in a (name, value) pair.

Object Oriented Interface


public function getHeaderFieldValue($headerfieldindex);


Procedural Interface


secureblackbox_mailreader_get($res, 188 , $headerfieldindex);


Default Value

''

Remarks

The value element in a (name, value) pair.

The $headerfieldindex parameter specifies the index of the item in the array. The size of the array is controlled by the HeaderFieldCount property.

This property is read-only and not available at design time.

Data Type

String

Profile Property (SecureBlackbox_MailReader Class)

Specifies a pre-defined profile to apply when creating the signature.

Object Oriented Interface


public function getProfile();


public function setProfile($value);

Procedural Interface


secureblackbox_mailreader_get($res, 189 );


secureblackbox_mailreader_set($res, 189, $value );

Default Value

''

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (SecureBlackbox_MailReader Class)

The IP address of the proxy server.

Object Oriented Interface


public function getProxyAddress();


public function setProxyAddress($value);

Procedural Interface


secureblackbox_mailreader_get($res, 190 );


secureblackbox_mailreader_set($res, 190, $value );

Default Value

''

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (SecureBlackbox_MailReader Class)

The authentication type used by the proxy server.

Object Oriented Interface


public function getProxyAuthentication();


public function setProxyAuthentication($value);

Procedural Interface


secureblackbox_mailreader_get($res, 191 );


secureblackbox_mailreader_set($res, 191, $value );

Default Value

0

Remarks

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Data Type

Integer

ProxyPassword Property (SecureBlackbox_MailReader Class)

The password to authenticate to the proxy server.

Object Oriented Interface


public function getProxyPassword();


public function setProxyPassword($value);

Procedural Interface


secureblackbox_mailreader_get($res, 192 );


secureblackbox_mailreader_set($res, 192, $value );

Default Value

''

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (SecureBlackbox_MailReader Class)

The port on the proxy server to connect to.

Object Oriented Interface


public function getProxyPort();


public function setProxyPort($value);

Procedural Interface


secureblackbox_mailreader_get($res, 193 );


secureblackbox_mailreader_set($res, 193, $value );

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (SecureBlackbox_MailReader Class)

The type of the proxy server.

Object Oriented Interface


public function getProxyProxyType();


public function setProxyProxyType($value);

Procedural Interface


secureblackbox_mailreader_get($res, 194 );


secureblackbox_mailreader_set($res, 194, $value );

Default Value

0

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

Data Type

Integer

ProxyRequestHeaders Property (SecureBlackbox_MailReader Class)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Object Oriented Interface


public function getProxyRequestHeaders();


public function setProxyRequestHeaders($value);

Procedural Interface


secureblackbox_mailreader_get($res, 195 );


secureblackbox_mailreader_set($res, 195, $value );

Default Value

''

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (SecureBlackbox_MailReader Class)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Object Oriented Interface


public function getProxyResponseBody();


public function setProxyResponseBody($value);

Procedural Interface


secureblackbox_mailreader_get($res, 196 );


secureblackbox_mailreader_set($res, 196, $value );

Default Value

''

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (SecureBlackbox_MailReader Class)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Object Oriented Interface


public function getProxyResponseHeaders();


public function setProxyResponseHeaders($value);

Procedural Interface


secureblackbox_mailreader_get($res, 197 );


secureblackbox_mailreader_set($res, 197, $value );

Default Value

''

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (SecureBlackbox_MailReader Class)

Specifies whether IPv6 should be used when connecting through the proxy.

Object Oriented Interface


public function getProxyUseIPv6();


public function setProxyUseIPv6($value);

Procedural Interface


secureblackbox_mailreader_get($res, 198 );


secureblackbox_mailreader_set($res, 198, $value );

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (SecureBlackbox_MailReader Class)

Enables or disables proxy-driven connection.

Object Oriented Interface


public function getProxyUseProxy();


public function setProxyUseProxy($value);

Procedural Interface


secureblackbox_mailreader_get($res, 199 );


secureblackbox_mailreader_set($res, 199, $value );

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (SecureBlackbox_MailReader Class)

Specifies the username credential for proxy authentication.

Object Oriented Interface


public function getProxyUsername();


public function setProxyUsername($value);

Procedural Interface


secureblackbox_mailreader_get($res, 200 );


secureblackbox_mailreader_set($res, 200, $value );

Default Value

''

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

ReplyToAddrCount Property (SecureBlackbox_MailReader Class)

The number of records in the ReplyToAddr arrays.

Object Oriented Interface


public function getReplyToAddrCount();


Procedural Interface


secureblackbox_mailreader_get($res, 201 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ReplyToAddrCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ReplyToAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getReplyToAddrAddress($replytoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 202 , $replytoaddrindex);


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

The $replytoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the ReplyToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

ReplyToAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getReplyToAddrDisplayName($replytoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 203 , $replytoaddrindex);


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

The $replytoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the ReplyToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

ReplyToAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getReplyToAddrGroupName($replytoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 204 , $replytoaddrindex);


Default Value

''

Remarks

The name of the group this address belongs to.

The $replytoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the ReplyToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

RevocationCheck Property (SecureBlackbox_MailReader Class)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Object Oriented Interface


public function getRevocationCheck();


public function setRevocationCheck($value);

Procedural Interface


secureblackbox_mailreader_get($res, 205 );


secureblackbox_mailreader_set($res, 205, $value );

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SecInfoChainValidationDetails Property (SecureBlackbox_MailReader Class)

The details of a certificate chain validation outcome.

Object Oriented Interface


public function getSecInfoChainValidationDetails();


Procedural Interface


secureblackbox_mailreader_get($res, 206 );


Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

Data Type

Integer

SecInfoChainValidationResult Property (SecureBlackbox_MailReader Class)

The outcome of a certificate chain validation routine.

Object Oriented Interface


public function getSecInfoChainValidationResult();


Procedural Interface


secureblackbox_mailreader_get($res, 207 );


Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

SecInfoClaimedSigningTime Property (SecureBlackbox_MailReader Class)

Returns the signature's claimed signing time.

Object Oriented Interface


public function getSecInfoClaimedSigningTime();


Procedural Interface


secureblackbox_mailreader_get($res, 208 );


Default Value

''

Remarks

Returns the signature's claimed signing time.

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by a trusted timestamp and may be forfeited or wrong. The time is provided in UTC.

This property is read-only.

Data Type

String

SecInfoEncrypted Property (SecureBlackbox_MailReader Class)

Indicates whether the message is encrypted.

Object Oriented Interface


public function getSecInfoEncrypted();


Procedural Interface


secureblackbox_mailreader_get($res, 209 );


Default Value

false

Remarks

Indicates whether the message is encrypted.

This property is read-only.

Data Type

Boolean

SecInfoEncryptionAlgorithm Property (SecureBlackbox_MailReader Class)

Indicates the algorithm that was used to encrypt the message.

Object Oriented Interface


public function getSecInfoEncryptionAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 210 );


Default Value

''

Remarks

Indicates the algorithm that was used to encrypt the message.

This property is read-only.

Data Type

String

SecInfoHashAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the hash algorithm that was used to calculate the signature.

Object Oriented Interface


public function getSecInfoHashAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 211 );


Default Value

''

Remarks

Specifies the hash algorithm that was used to calculate the signature.

This property is read-only.

Data Type

String

SecInfoSignatureValidationResult Property (SecureBlackbox_MailReader Class)

The outcome of the cryptographic signature validation.

Object Oriented Interface


public function getSecInfoSignatureValidationResult();


Procedural Interface


secureblackbox_mailreader_get($res, 212 );


Default Value

0

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

This property is read-only and not available at design time.

Data Type

Integer

SecInfoSigned Property (SecureBlackbox_MailReader Class)

Indicates whether the message is signed.

Object Oriented Interface


public function getSecInfoSigned();


Procedural Interface


secureblackbox_mailreader_get($res, 213 );


Default Value

false

Remarks

Indicates whether the message is signed.

This property is read-only.

Data Type

Boolean

SecInfoValidationLog Property (SecureBlackbox_MailReader Class)

Contains the signing certificate's chain validation log.

Object Oriented Interface


public function getSecInfoValidationLog();


Procedural Interface


secureblackbox_mailreader_get($res, 214 );


Default Value

''

Remarks

Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

Data Type

String

SenderAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getSenderAddrAddress();


Procedural Interface


secureblackbox_mailreader_get($res, 215 );


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

This property is read-only.

Data Type

String

SenderAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getSenderAddrDisplayName();


Procedural Interface


secureblackbox_mailreader_get($res, 216 );


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

This property is read-only.

Data Type

String

SenderAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getSenderAddrGroupName();


Procedural Interface


secureblackbox_mailreader_get($res, 217 );


Default Value

''

Remarks

The name of the group this address belongs to.

This property is read-only.

Data Type

String

SendToAddrCount Property (SecureBlackbox_MailReader Class)

The number of records in the SendToAddr arrays.

Object Oriented Interface


public function getSendToAddrCount();


Procedural Interface


secureblackbox_mailreader_get($res, 218 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SendToAddrCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SendToAddrAddress Property (SecureBlackbox_MailReader Class)

Contains the e-mail address in the form of john@doe.

Object Oriented Interface


public function getSendToAddrAddress($sendtoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 219 , $sendtoaddrindex);


Default Value

''

Remarks

Contains the e-mail address in the form of john@doe.com.

The $sendtoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the SendToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

SendToAddrDisplayName Property (SecureBlackbox_MailReader Class)

Contains the friendly name of the user of this address, such as John Doe.

Object Oriented Interface


public function getSendToAddrDisplayName($sendtoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 220 , $sendtoaddrindex);


Default Value

''

Remarks

Contains the friendly name of the user of this address, such as John Doe.

The $sendtoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the SendToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

SendToAddrGroupName Property (SecureBlackbox_MailReader Class)

The name of the group this address belongs to.

Object Oriented Interface


public function getSendToAddrGroupName($sendtoaddrindex);


Procedural Interface


secureblackbox_mailreader_get($res, 221 , $sendtoaddrindex);


Default Value

''

Remarks

The name of the group this address belongs to.

The $sendtoaddrindex parameter specifies the index of the item in the array. The size of the array is controlled by the SendToAddrCount property.

This property is read-only and not available at design time.

Data Type

String

SigningCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getSigningCertBytes();


Procedural Interface


secureblackbox_mailreader_get($res, 222 );


Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertCA Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Object Oriented Interface


public function getSigningCertCA();


Procedural Interface


secureblackbox_mailreader_get($res, 223 );


Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertCAKeyID Property (SecureBlackbox_MailReader Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface


public function getSigningCertCAKeyID();


Procedural Interface


secureblackbox_mailreader_get($res, 224 );


Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertCRLDistributionPoints Property (SecureBlackbox_MailReader Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Object Oriented Interface


public function getSigningCertCRLDistributionPoints();


Procedural Interface


secureblackbox_mailreader_get($res, 225 );


Default Value

''

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is read-only and not available at design time.

Data Type

String

SigningCertCurve Property (SecureBlackbox_MailReader Class)

Specifies the elliptic curve of the EC public key.

Object Oriented Interface


public function getSigningCertCurve();


Procedural Interface


secureblackbox_mailreader_get($res, 226 );


Default Value

''

Remarks

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

This property is read-only and not available at design time.

Data Type

String

SigningCertFingerprint Property (SecureBlackbox_MailReader Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface


public function getSigningCertFingerprint();


Procedural Interface


secureblackbox_mailreader_get($res, 227 );


Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertFriendlyName Property (SecureBlackbox_MailReader Class)

Contains an associated alias (friendly name) of the certificate.

Object Oriented Interface


public function getSigningCertFriendlyName();


Procedural Interface


secureblackbox_mailreader_get($res, 228 );


Default Value

''

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

SigningCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getSigningCertHandle();


Procedural Interface


secureblackbox_mailreader_get($res, 229 );


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

SigningCertHashAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Object Oriented Interface


public function getSigningCertHashAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 230 );


Default Value

''

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

This property is read-only and not available at design time.

Data Type

String

SigningCertIssuer Property (SecureBlackbox_MailReader Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface


public function getSigningCertIssuer();


Procedural Interface


secureblackbox_mailreader_get($res, 231 );


Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

SigningCertIssuerRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface


public function getSigningCertIssuerRDN();


Procedural Interface


secureblackbox_mailreader_get($res, 232 );


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

SigningCertKeyAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface


public function getSigningCertKeyAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 233 );


Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

This property is read-only and not available at design time.

Data Type

String

SigningCertKeyBits Property (SecureBlackbox_MailReader Class)

Returns the length of the public key.

Object Oriented Interface


public function getSigningCertKeyBits();


Procedural Interface


secureblackbox_mailreader_get($res, 234 );


Default Value

0

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

SigningCertKeyFingerprint Property (SecureBlackbox_MailReader Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface


public function getSigningCertKeyFingerprint();


Procedural Interface


secureblackbox_mailreader_get($res, 235 );


Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertKeyUsage Property (SecureBlackbox_MailReader Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface


public function getSigningCertKeyUsage();


Procedural Interface


secureblackbox_mailreader_get($res, 236 );


Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

This property is read-only and not available at design time.

Data Type

Integer

SigningCertKeyValid Property (SecureBlackbox_MailReader Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Object Oriented Interface


public function getSigningCertKeyValid();


Procedural Interface


secureblackbox_mailreader_get($res, 237 );


Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertOCSPLocations Property (SecureBlackbox_MailReader Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Object Oriented Interface


public function getSigningCertOCSPLocations();


Procedural Interface


secureblackbox_mailreader_get($res, 238 );


Default Value

''

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is read-only and not available at design time.

Data Type

String

SigningCertPolicyIDs Property (SecureBlackbox_MailReader Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Object Oriented Interface


public function getSigningCertPolicyIDs();


Procedural Interface


secureblackbox_mailreader_get($res, 241 );


Default Value

''

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is read-only and not available at design time.

Data Type

String

SigningCertPublicKeyBytes Property (SecureBlackbox_MailReader Class)

Contains the certificate's public key in DER format.

Object Oriented Interface


public function getSigningCertPublicKeyBytes();


Procedural Interface


secureblackbox_mailreader_get($res, 245 );


Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSelfSigned Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface


public function getSigningCertSelfSigned();


Procedural Interface


secureblackbox_mailreader_get($res, 247 );


Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertSerialNumber Property (SecureBlackbox_MailReader Class)

Returns the certificate's serial number.

Object Oriented Interface


public function getSigningCertSerialNumber();


Procedural Interface


secureblackbox_mailreader_get($res, 248 );


Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSigAlgorithm Property (SecureBlackbox_MailReader Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface


public function getSigningCertSigAlgorithm();


Procedural Interface


secureblackbox_mailreader_get($res, 249 );


Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

SigningCertSubject Property (SecureBlackbox_MailReader Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface


public function getSigningCertSubject();


Procedural Interface


secureblackbox_mailreader_get($res, 250 );


Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

SigningCertSubjectKeyID Property (SecureBlackbox_MailReader Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface


public function getSigningCertSubjectKeyID();


Procedural Interface


secureblackbox_mailreader_get($res, 252 );


Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSubjectRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface


public function getSigningCertSubjectRDN();


Procedural Interface


secureblackbox_mailreader_get($res, 253 );


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

SigningCertValidFrom Property (SecureBlackbox_MailReader Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface


public function getSigningCertValidFrom();


Procedural Interface


secureblackbox_mailreader_get($res, 254 );


Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is read-only and not available at design time.

Data Type

String

SigningCertValidTo Property (SecureBlackbox_MailReader Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface


public function getSigningCertValidTo();


Procedural Interface


secureblackbox_mailreader_get($res, 255 );


Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

This property is read-only and not available at design time.

Data Type

String

SocketDNSMode Property (SecureBlackbox_MailReader Class)

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Object Oriented Interface


public function getSocketDNSMode();


public function setSocketDNSMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 256 );


secureblackbox_mailreader_set($res, 256, $value );

Default Value

0

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

Data Type

Integer

SocketDNSPort Property (SecureBlackbox_MailReader Class)

Specifies the port number to be used for sending queries to the DNS server.

Object Oriented Interface


public function getSocketDNSPort();


public function setSocketDNSPort($value);

Procedural Interface


secureblackbox_mailreader_get($res, 257 );


secureblackbox_mailreader_set($res, 257, $value );

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (SecureBlackbox_MailReader Class)

The timeout (in milliseconds) for each DNS query.

Object Oriented Interface


public function getSocketDNSQueryTimeout();


public function setSocketDNSQueryTimeout($value);

Procedural Interface


secureblackbox_mailreader_get($res, 258 );


secureblackbox_mailreader_set($res, 258, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (SecureBlackbox_MailReader Class)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Object Oriented Interface


public function getSocketDNSServers();


public function setSocketDNSServers($value);

Procedural Interface


secureblackbox_mailreader_get($res, 259 );


secureblackbox_mailreader_set($res, 259, $value );

Default Value

''

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (SecureBlackbox_MailReader Class)

The timeout (in milliseconds) for the whole resolution process.

Object Oriented Interface


public function getSocketDNSTotalTimeout();


public function setSocketDNSTotalTimeout($value);

Procedural Interface


secureblackbox_mailreader_get($res, 260 );


secureblackbox_mailreader_set($res, 260, $value );

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (SecureBlackbox_MailReader Class)

The maximum number of bytes to read from the socket, per second.

Object Oriented Interface


public function getSocketIncomingSpeedLimit();


public function setSocketIncomingSpeedLimit($value);

Procedural Interface


secureblackbox_mailreader_get($res, 261 );


secureblackbox_mailreader_set($res, 261, $value );

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (SecureBlackbox_MailReader Class)

The local network interface to bind the socket to.

Object Oriented Interface


public function getSocketLocalAddress();


public function setSocketLocalAddress($value);

Procedural Interface


secureblackbox_mailreader_get($res, 262 );


secureblackbox_mailreader_set($res, 262, $value );

Default Value

''

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (SecureBlackbox_MailReader Class)

The local port number to bind the socket to.

Object Oriented Interface


public function getSocketLocalPort();


public function setSocketLocalPort($value);

Procedural Interface


secureblackbox_mailreader_get($res, 263 );


secureblackbox_mailreader_set($res, 263, $value );

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (SecureBlackbox_MailReader Class)

The maximum number of bytes to write to the socket, per second.

Object Oriented Interface


public function getSocketOutgoingSpeedLimit();


public function setSocketOutgoingSpeedLimit($value);

Procedural Interface


secureblackbox_mailreader_get($res, 264 );


secureblackbox_mailreader_set($res, 264, $value );

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (SecureBlackbox_MailReader Class)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Object Oriented Interface


public function getSocketTimeout();


public function setSocketTimeout($value);

Procedural Interface


secureblackbox_mailreader_get($res, 265 );


secureblackbox_mailreader_set($res, 265, $value );

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (SecureBlackbox_MailReader Class)

Enables or disables IP protocol version 6.

Object Oriented Interface


public function getSocketUseIPv6();


public function setSocketUseIPv6($value);

Procedural Interface


secureblackbox_mailreader_get($res, 266 );


secureblackbox_mailreader_set($res, 266, $value );

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TLSAutoValidateCertificates Property (SecureBlackbox_MailReader Class)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Object Oriented Interface


public function getTLSAutoValidateCertificates();


public function setTLSAutoValidateCertificates($value);

Procedural Interface


secureblackbox_mailreader_get($res, 267 );


secureblackbox_mailreader_set($res, 267, $value );

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (SecureBlackbox_MailReader Class)

Selects the base configuration for the TLS settings.

Object Oriented Interface


public function getTLSBaseConfiguration();


public function setTLSBaseConfiguration($value);

Procedural Interface


secureblackbox_mailreader_get($res, 268 );


secureblackbox_mailreader_set($res, 268, $value );

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

Data Type

Integer

TLSCiphersuites Property (SecureBlackbox_MailReader Class)

A list of ciphersuites separated with commas or semicolons.

Object Oriented Interface


public function getTLSCiphersuites();


public function setTLSCiphersuites($value);

Procedural Interface


secureblackbox_mailreader_get($res, 269 );


secureblackbox_mailreader_set($res, 269, $value );

Default Value

''

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (SecureBlackbox_MailReader Class)

Defines the elliptic curves to enable.

Object Oriented Interface


public function getTLSECCurves();


public function setTLSECCurves($value);

Procedural Interface


secureblackbox_mailreader_get($res, 270 );


secureblackbox_mailreader_set($res, 270, $value );

Default Value

''

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (SecureBlackbox_MailReader Class)

Provides access to TLS extensions.

Object Oriented Interface


public function getTLSExtensions();


public function setTLSExtensions($value);

Procedural Interface


secureblackbox_mailreader_get($res, 271 );


secureblackbox_mailreader_set($res, 271, $value );

Default Value

''

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (SecureBlackbox_MailReader Class)

Whether to force TLS session resumption when the destination address changes.

Object Oriented Interface


public function getTLSForceResumeIfDestinationChanges();


public function setTLSForceResumeIfDestinationChanges($value);

Procedural Interface


secureblackbox_mailreader_get($res, 272 );


secureblackbox_mailreader_set($res, 272, $value );

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (SecureBlackbox_MailReader Class)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Object Oriented Interface


public function getTLSPreSharedIdentity();


public function setTLSPreSharedIdentity($value);

Procedural Interface


secureblackbox_mailreader_get($res, 273 );


secureblackbox_mailreader_set($res, 273, $value );

Default Value

''

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (SecureBlackbox_MailReader Class)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Object Oriented Interface


public function getTLSPreSharedKey();


public function setTLSPreSharedKey($value);

Procedural Interface


secureblackbox_mailreader_get($res, 274 );


secureblackbox_mailreader_set($res, 274, $value );

Default Value

''

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (SecureBlackbox_MailReader Class)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Object Oriented Interface


public function getTLSPreSharedKeyCiphersuite();


public function setTLSPreSharedKeyCiphersuite($value);

Procedural Interface


secureblackbox_mailreader_get($res, 275 );


secureblackbox_mailreader_set($res, 275, $value );

Default Value

''

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (SecureBlackbox_MailReader Class)

Selects the renegotiation attack prevention mechanism.

Object Oriented Interface


public function getTLSRenegotiationAttackPreventionMode();


public function setTLSRenegotiationAttackPreventionMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 276 );


secureblackbox_mailreader_set($res, 276, $value );

Default Value

0

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

Integer

TLSRevocationCheck Property (SecureBlackbox_MailReader Class)

Specifies the kind(s) of revocation check to perform.

Object Oriented Interface


public function getTLSRevocationCheck();


public function setTLSRevocationCheck($value);

Procedural Interface


secureblackbox_mailreader_get($res, 277 );


secureblackbox_mailreader_set($res, 277, $value );

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (SecureBlackbox_MailReader Class)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Object Oriented Interface


public function getTLSSSLOptions();


public function setTLSSSLOptions($value);

Procedural Interface


secureblackbox_mailreader_get($res, 278 );


secureblackbox_mailreader_set($res, 278, $value );

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add the server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send the handshake message as large batches rather than individually

Data Type

Integer

TLSTLSMode Property (SecureBlackbox_MailReader Class)

Specifies the TLS mode to use.

Object Oriented Interface


public function getTLSTLSMode();


public function setTLSTLSMode($value);

Procedural Interface


secureblackbox_mailreader_get($res, 279 );


secureblackbox_mailreader_set($res, 279, $value );

Default Value

0

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, but allow plain data.

Data Type

Integer

TLSUseExtendedMasterSecret Property (SecureBlackbox_MailReader Class)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Object Oriented Interface


public function getTLSUseExtendedMasterSecret();


public function setTLSUseExtendedMasterSecret($value);

Procedural Interface


secureblackbox_mailreader_get($res, 280 );


secureblackbox_mailreader_set($res, 280, $value );

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (SecureBlackbox_MailReader Class)

Enables or disables the TLS session resumption capability.

Object Oriented Interface


public function getTLSUseSessionResumption();


public function setTLSUseSessionResumption($value);

Procedural Interface


secureblackbox_mailreader_get($res, 281 );


secureblackbox_mailreader_set($res, 281, $value );

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (SecureBlackbox_MailReader Class)

The SSL/TLS versions to enable by default.

Object Oriented Interface


public function getTLSVersions();


public function setTLSVersions($value);

Procedural Interface


secureblackbox_mailreader_get($res, 282 );


secureblackbox_mailreader_set($res, 282, $value );

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Data Type

Integer

TrustedCertCount Property (SecureBlackbox_MailReader Class)

The number of records in the TrustedCert arrays.

Object Oriented Interface


public function getTrustedCertCount();


public function setTrustedCertCount($value);

Procedural Interface


secureblackbox_mailreader_get($res, 283 );


secureblackbox_mailreader_set($res, 283, $value );

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getTrustedCertBytes($trustedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 284 , $trustedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getTrustedCertHandle($trustedcertindex);


public function setTrustedCertHandle($trustedcertindex, $value);

Procedural Interface


secureblackbox_mailreader_get($res, 291 , $trustedcertindex);


secureblackbox_mailreader_set($res, 291, $value , $trustedcertindex);

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $trustedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

UsedCertCount Property (SecureBlackbox_MailReader Class)

The number of records in the UsedCert arrays.

Object Oriented Interface


public function getUsedCertCount();


Procedural Interface


secureblackbox_mailreader_get($res, 318 );


Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at UsedCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

UsedCertBytes Property (SecureBlackbox_MailReader Class)

Returns the raw certificate data in DER format.

Object Oriented Interface


public function getUsedCertBytes($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 319 , $usedcertindex);


Remarks

Returns the raw certificate data in DER format.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertCA Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Object Oriented Interface


public function getUsedCertCA($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 320 , $usedcertindex);


Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertCAKeyID Property (SecureBlackbox_MailReader Class)

A unique identifier (fingerprint) of the CA certificate's private key.

Object Oriented Interface


public function getUsedCertCAKeyID($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 321 , $usedcertindex);


Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertCRLDistributionPoints Property (SecureBlackbox_MailReader Class)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Object Oriented Interface


public function getUsedCertCRLDistributionPoints($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 322 , $usedcertindex);


Default Value

''

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertCurve Property (SecureBlackbox_MailReader Class)

Specifies the elliptic curve of the EC public key.

Object Oriented Interface


public function getUsedCertCurve($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 323 , $usedcertindex);


Default Value

''

Remarks

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertFingerprint Property (SecureBlackbox_MailReader Class)

Contains the fingerprint (a hash imprint) of this certificate.

Object Oriented Interface


public function getUsedCertFingerprint($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 324 , $usedcertindex);


Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertFriendlyName Property (SecureBlackbox_MailReader Class)

Contains an associated alias (friendly name) of the certificate.

Object Oriented Interface


public function getUsedCertFriendlyName($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 325 , $usedcertindex);


Default Value

''

Remarks

Contains an associated alias (friendly name) of the certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertHandle Property (SecureBlackbox_MailReader Class)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Object Oriented Interface


public function getUsedCertHandle($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 326 , $usedcertindex);


Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

UsedCertHashAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Object Oriented Interface


public function getUsedCertHashAlgorithm($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 327 , $usedcertindex);


Default Value

''

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertIssuer Property (SecureBlackbox_MailReader Class)

The common name of the certificate issuer (CA), typically a company name.

Object Oriented Interface


public function getUsedCertIssuer($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 328 , $usedcertindex);


Default Value

''

Remarks

The common name of the certificate issuer (CA), typically a company name.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertIssuerRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Object Oriented Interface


public function getUsedCertIssuerRDN($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 329 , $usedcertindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertKeyAlgorithm Property (SecureBlackbox_MailReader Class)

Specifies the public key algorithm of this certificate.

Object Oriented Interface


public function getUsedCertKeyAlgorithm($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 330 , $usedcertindex);


Default Value

'0'

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertKeyBits Property (SecureBlackbox_MailReader Class)

Returns the length of the public key.

Object Oriented Interface


public function getUsedCertKeyBits($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 331 , $usedcertindex);


Default Value

0

Remarks

Returns the length of the public key.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

UsedCertKeyFingerprint Property (SecureBlackbox_MailReader Class)

Returns a fingerprint of the public key contained in the certificate.

Object Oriented Interface


public function getUsedCertKeyFingerprint($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 332 , $usedcertindex);


Remarks

Returns a fingerprint of the public key contained in the certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertKeyUsage Property (SecureBlackbox_MailReader Class)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Object Oriented Interface


public function getUsedCertKeyUsage($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 333 , $usedcertindex);


Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

UsedCertKeyValid Property (SecureBlackbox_MailReader Class)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Object Oriented Interface


public function getUsedCertKeyValid($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 334 , $usedcertindex);


Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertOCSPLocations Property (SecureBlackbox_MailReader Class)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Object Oriented Interface


public function getUsedCertOCSPLocations($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 335 , $usedcertindex);


Default Value

''

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertOCSPNoCheck Property (SecureBlackbox_MailReader Class)

Accessor to the value of the certificate's ocsp-no-check extension.

Object Oriented Interface


public function getUsedCertOCSPNoCheck($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 336 , $usedcertindex);


Default Value

false

Remarks

Accessor to the value of the certificate's ocsp-no-check extension.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertOrigin Property (SecureBlackbox_MailReader Class)

Returns the origin of this certificate.

Object Oriented Interface


public function getUsedCertOrigin($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 337 , $usedcertindex);


Default Value

0

Remarks

Returns the origin of this certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

UsedCertPolicyIDs Property (SecureBlackbox_MailReader Class)

Contains identifiers (OIDs) of the applicable certificate policies.

Object Oriented Interface


public function getUsedCertPolicyIDs($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 338 , $usedcertindex);


Default Value

''

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertPrivateKeyBytes Property (SecureBlackbox_MailReader Class)

Contains the certificate's private key.

Object Oriented Interface


public function getUsedCertPrivateKeyBytes($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 339 , $usedcertindex);


Remarks

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertPrivateKeyExists Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate has an associated private key.

Object Oriented Interface


public function getUsedCertPrivateKeyExists($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 340 , $usedcertindex);


Default Value

false

Remarks

Indicates whether the certificate has an associated private key.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertPrivateKeyExtractable Property (SecureBlackbox_MailReader Class)

Indicates whether the private key is extractable.

Object Oriented Interface


public function getUsedCertPrivateKeyExtractable($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 341 , $usedcertindex);


Default Value

false

Remarks

Indicates whether the private key is extractable.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertPublicKeyBytes Property (SecureBlackbox_MailReader Class)

Contains the certificate's public key in DER format.

Object Oriented Interface


public function getUsedCertPublicKeyBytes($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 342 , $usedcertindex);


Remarks

Contains the certificate's public key in DER format.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertQualifiedStatements Property (SecureBlackbox_MailReader Class)

Returns the qualified status of the certificate.

Object Oriented Interface


public function getUsedCertQualifiedStatements($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 343 , $usedcertindex);


Default Value

0

Remarks

Returns the qualified status of the certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

UsedCertSelfSigned Property (SecureBlackbox_MailReader Class)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Object Oriented Interface


public function getUsedCertSelfSigned($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 344 , $usedcertindex);


Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

UsedCertSerialNumber Property (SecureBlackbox_MailReader Class)

Returns the certificate's serial number.

Object Oriented Interface


public function getUsedCertSerialNumber($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 345 , $usedcertindex);


Remarks

Returns the certificate's serial number.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertSigAlgorithm Property (SecureBlackbox_MailReader Class)

Indicates the algorithm that was used by the CA to sign this certificate.

Object Oriented Interface


public function getUsedCertSigAlgorithm($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 346 , $usedcertindex);


Default Value

''

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertSubject Property (SecureBlackbox_MailReader Class)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Object Oriented Interface


public function getUsedCertSubject($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 347 , $usedcertindex);


Default Value

''

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertSubjectAlternativeName Property (SecureBlackbox_MailReader Class)

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Object Oriented Interface


public function getUsedCertSubjectAlternativeName($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 348 , $usedcertindex);


Default Value

''

Remarks

Returns or sets the value of the Subject Alternative Name extension of the certificate.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertSubjectKeyID Property (SecureBlackbox_MailReader Class)

Contains a unique identifier (fingerprint) of the certificate's private key.

Object Oriented Interface


public function getUsedCertSubjectKeyID($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 349 , $usedcertindex);


Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UsedCertSubjectRDN Property (SecureBlackbox_MailReader Class)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Object Oriented Interface


public function getUsedCertSubjectRDN($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 350 , $usedcertindex);


Default Value

''

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertValidFrom Property (SecureBlackbox_MailReader Class)

The time point at which the certificate becomes valid, in UTC.

Object Oriented Interface


public function getUsedCertValidFrom($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 351 , $usedcertindex);


Default Value

''

Remarks

The time point at which the certificate becomes valid, in UTC.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

UsedCertValidTo Property (SecureBlackbox_MailReader Class)

The time point at which the certificate expires, in UTC.

Object Oriented Interface


public function getUsedCertValidTo($usedcertindex);


Procedural Interface


secureblackbox_mailreader_get($res, 352 , $usedcertindex);


Default Value

''

Remarks

The time point at which the certificate expires, in UTC.

The $usedcertindex parameter specifies the index of the item in the array. The size of the array is controlled by the UsedCertCount property.

This property is read-only and not available at design time.

Data Type

String

ValidationMoment Property (SecureBlackbox_MailReader Class)

The time point at which signature validity is to be established.

Object Oriented Interface


public function getValidationMoment();


public function setValidationMoment($value);

Procedural Interface


secureblackbox_mailreader_get($res, 353 );


secureblackbox_mailreader_set($res, 353, $value );

Default Value

''

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

Config Method (SecureBlackbox_MailReader Class)

Sets or retrieves a configuration setting.

Object Oriented Interface

public function doConfig($configurationstring);

Procedural Interface

secureblackbox_mailreader_do_config($res, $configurationstring);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (SecureBlackbox_MailReader Class)

Performs an additional action.

Object Oriented Interface

public function doDoAction($actionid, $actionparams);

Procedural Interface

secureblackbox_mailreader_do_doaction($res, $actionid, $actionparams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

FindAttachment Method (SecureBlackbox_MailReader Class)

Looks up a Message's attachment by its ID.

Object Oriented Interface

public function doFindAttachment($id);

Procedural Interface

secureblackbox_mailreader_do_findattachment($res, $id);

Remarks

Use this method to find the attachment by its ID.

LoadFromBytes Method (SecureBlackbox_MailReader Class)

Loads an e-mail message from a byte array.

Object Oriented Interface

public function doLoadFromBytes($messagebytes);

Procedural Interface

secureblackbox_mailreader_do_loadfrombytes($res, $messagebytes);

Remarks

Use this method to load a message from a byte array and process it. Once the message has been loaded, use Message to access its properties.

LoadFromFile Method (SecureBlackbox_MailReader Class)

Loads an e-mail message from a file.

Object Oriented Interface

public function doLoadFromFile($filename);

Procedural Interface

secureblackbox_mailreader_do_loadfromfile($res, $filename);

Remarks

Use this method to load a message from a file and process it. Once the message has been loaded, use Message to access its properties.

ChainValidated Event (SecureBlackbox_MailReader Class)

Reports the completion of a certificate chain validation.

Object Oriented Interface

public function fireChainValidated($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 1, array($this, 'fireChainValidated'));

Parameter List

 'subjectrdn'
'validationresult'
'validationdetails'

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.
cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

DecryptionInfoNeeded Event (SecureBlackbox_MailReader Class)

Asks the application to provide a decryption certificate.

Object Oriented Interface

public function fireDecryptionInfoNeeded($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 2, array($this, 'fireDecryptionInfoNeeded'));

Parameter List

 'issuerrdn'
'serialnumber'
'subjectkeyid'

Remarks

This event is fired when the component needs a decryption certificate. Use the provided values to look up the certificate, and assign it to DecryptionCertificate property.

Note that the decryption certificate must have an associated private key.

Error Event (SecureBlackbox_MailReader Class)

Reports information about errors during e-mail message loading, parsing or saving.

Object Oriented Interface

public function fireError($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 3, array($this, 'fireError'));

Parameter List

 'errorcode'
'description'

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalDecrypt Event (SecureBlackbox_MailReader Class)

Handles remote or external decryption.

Object Oriented Interface

public function fireExternalDecrypt($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 4, array($this, 'fireExternalDecrypt'));

Parameter List

 'operationid'
'algorithm'
'pars'
'encrypteddata'
'data'

Remarks

Assign a handler to this event if you need to delegate a low-level decryption operation to an external, remote, or custom decryption engine. The handler receives an encrypted value in the EncryptedData parameter, and is expected to decrypt it and place the decrypted value into the Data parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. Algorithm specifies the encryption algorithm being used, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the EncryptedData, Data, and Pars parameters. If your decryption engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the decryption.

Sample data encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

Notification Event (SecureBlackbox_MailReader Class)

This event notifies the application about an underlying control flow event.

Object Oriented Interface

public function fireNotification($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 5, array($this, 'fireNotification'));

Parameter List

 'eventid'
'eventparam'

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

SignatureFound Event (SecureBlackbox_MailReader Class)

Signifies the start of signature validation.

Object Oriented Interface

public function fireSignatureFound($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 6, array($this, 'fireSignatureFound'));

Parameter List

 'issuerrdn'
'serialnumber'
'subjectkeyid'
'certfound'
'validatesignature'
'validatechain'

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (SecureBlackbox_MailReader Class)

Marks the completion of the signature validation routine.

Object Oriented Interface

public function fireSignatureValidated($param);

Procedural Interface

secureblackbox_mailreader_register_callback($res, 7, array($this, 'fireSignatureValidated'));

Parameter List

 'issuerrdn'
'serialnumber'
'subjectkeyid'
'validationresult'

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

Config Settings (MailReader Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

MailReader Config Settings

GracePeriod:   Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

HeaderCharset:   Charset of the header. If not empty, the one specified in the message header will be ignored.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.

MaxHeaderSize:   Specifies the maximum mail message header size in bytes.

Use this property to adjust the maximum size of a mail message header. If no header end (CRLFCRLF) found, the header is considered blank. Default size is 32768 (i.e. 32KB).

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TextCharset:   Charset of text parts, if any. If not empty, the one specified in the message text parts will be ignored.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

  • CA, revocation source, TLS key usage requirements are not mandated
  • Violation of OCSP issuer requirements are ignored
  • The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
  • Basic constraints and name constraints of CA certificates are ignored
  • Some weaker algorithms are tolerated
UseMicrosoftCTL:   Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (MailReader Class)

MailReader Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)
22020097   Failed to assemble a mail message (SB_ERROR_MAIL_ASSEMBLY_FAILED)
22020098   Failed to parse a mail message (SB_ERROR_MAIL_PARSING_FAILED)
22020099   Failed to decrypt a message because there is no decryption certificate provided (SB_ERROR_MAIL_NO_DECRYPTION_CERTIFICATE)