SOAPQuickSigner Component

Properties Methods Events Config Settings Errors

The SOAPQuickSigner component signs SOAP messages.

Syntax

TsbxSOAPQuickSigner

Remarks

The purpose of the SOAPQuickSigner component is creating simple generic signatures over SOAP messages. Unlike SOAPSigner, it does not include chain validation and LTV features, and may be more appropriate for scenarios where no chain validation is required.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


CanonicalizationMethod	Specifies XML canonicalization method to use.
EmbedCertificateMethod	Controls the certificate disposition within the signature.
Encoding	Specifies XML encoding.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
HashAlgorithm	Specifies the hash algorithm to be used.
InputFile	Specifies the SOAP message to be signed.
OutputFile	A file where the signed SOAP message will be saved.
References	A list of references to the data to be signed.
SecurityHeaderIndex	Specifies the SecurityHeader index.
SignatureType	The SOAP signature type to use.
SigningCertificate	The certificate to be used for signing.
SigningChain	The signing certificate chain.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


AddBodyReference	Creates a new XML reference to the Body element of the SOAP message.
AddDataReference	Creates a new XML reference to the specified data.
AddKnownNamespace	Adds known prefix and correspondent namespace URI.
AddReference	Creates a new XML reference to the specified XML element.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
ExtractAsyncData	Extracts user data from the DC signing service response.
GetInnerXML	Get the inner XML content of the selected XML element.
GetOuterXML	Get the outer XML content of the selected XML element.
GetTextContent	Get the text content of the selected XML element.
Reset	Resets the component settings.
SetInnerXML	Set the inner XML content of the selected XML element.
SetTextContent	Set the text content of the selected XML element.
Sign	Signs the SOAP message.
SignAsyncBegin	Initiates the asynchronous signing operation.
SignAsyncEnd	Completes the asynchronous signing operation.
SignExternal	Signs the document using an external signing facility.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


Error	Information about errors during signing.
ExternalSign	Handles remote or external signing initiated by the SignExternal method or other source.
FormatElement	Reports the XML element that is currently being processed.
FormatText	Reports XML text that is currently being processed.
Notification	This event notifies the application about an underlying control flow event.
ResolveReference	Asks the application to resolve a reference.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


AddAllDataObjectsTimestamp	Whether to add all data objects timestamp during signing.
BinarySecurityTokenID	Specifies the ID for BinarySecurityToken element.
BinarySecurityTokenType	Specifies the token type for BinarySecurityToken element.
ClaimedRolesXML	The XML content of the claimed roles.
ClaimedRoleText	The text of the claimed role.
CommitmentTypeIndicationAllSignedDataObjects[Index]	Specifies the CommitmentTypeIndication's AllSignedDataObjects.
CommitmentTypeIndicationCount	The number of the CommitmentTypeIndication elements.
CommitmentTypeIndicationIdentifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.
CommitmentTypeIndicationIdentifierDescription[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.
CommitmentTypeIndicationIdentifierDocumentationReferences[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.
CommitmentTypeIndicationIdentifierQualifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.
CommitmentTypeIndicationObjectReference[Index]	Specifies the CommitmentTypeIndication's ObjectReference.
CommitmentTypeIndicationQualifiersXML[Index]	The XML content of the CommitmentTypeIndication's Qualifiers.
DataObjectFormatCount	The number of the DataObjectFormat elements.
DataObjectFormatDescription[Index]	Specifies the DataObjectFormat's Description.
DataObjectFormatEncoding[Index]	Specifies the DataObjectFormat's Encoding.
DataObjectFormatMimeType[Index]	Specifies the DataObjectFormat's MimeType.
DataObjectFormatObjectIdentifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Identifier.
DataObjectFormatObjectIdentifierDescription[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Description.
DataObjectFormatObjectIdentifierDocumentationReferences[Index]	Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.
DataObjectFormatObjectIdentifierQualifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.
DataObjectFormatObjectReference[Index]	Specifies the DataObjectFormat's ObjectReference.
ExclusiveCanonicalizationPrefix	Specifies the exclusive canonicalization prefix.
HMACKey	The key value for HMAC.
HMACOutputLength	Sets the length of the HMAC output.
HMACSigningUsed	Whether to use HMAC signing.
IgnoreTimestampFailure	Whether to ignore time-stamping failure during signing.
IncludeKey	Specifies whether to include the signing key to the signature.
IncludeKeyValue	Specifies whether the key value must be included to the signature.
IncludeKnownRevocationInfoToSignature	Whether to include custom revocation info to the signature.
InclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList.
KeyInfoCustomXML	The custom XML content for KeyInfo element.
KeyInfoDetails	Specifies the signing key info details to include to the signature.
KeyInfoID	Specifies the ID for KeyInfo element.
KeyName	Contains information about the key used for signing.
NormalizeNewLine	Controls whether newline combinations should be automatically normalized.
PolicyDescription	signature policy description.
PolicyExplicitText	The explicit text of the user notice.
PolicyUNNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganization	The organization part of the NoticeReference qualifier.
PrependCustomXML	The custom XML content that prepended before signature.
ProductionPlace	Identifies the place of the signature production.
PSSUsed	Whether to use RSASSA-PSS algorithm.
QualifyingPropertiesID	Specifies the ID for QualifyingProperties element.
QualifyingPropertiesObjectID	Specifies the ID for object with QualifyingProperties element.
QualifyingPropertiesReferenceCount	The number of the QualifyingPropertiesReference elements.
QualifyingPropertiesReferenceID[Index]	Specifies the QualifyingPropertiesReference's ID.
QualifyingPropertiesReferenceURI[Index]	Specifies the QualifyingPropertiesReference's URI.
RefsTimestampType	Specifies references timestamp type to include to the signature.
SecurityHeaderIndex	Specifies the SecurityHeader index.
SecurityHeaderMustUnderstand	Specifies the MustUnderstand for SecurityHeader element.
SecurityTokenReferenceID	Specifies the ID for SecurityTokenReference element.
SecurityTokenReferenceTokenType	Specifies the token type for SecurityTokenReference element.
SignatureID	Specifies the ID for Signature element.
SignaturePrefix	Specifies the signature prefix.
SignatureValueID	Specifies the ID for SignatureValue element.
SignedInfoID	Specifies the ID for SignedInfo element.
SignedPropertiesID	Specifies the ID for SignedProperties element.
SignedPropertiesReferenceCanonicalizationMethod	Specifies the canonicalization method used in SignedProperties reference.
SignedPropertiesReferenceHashAlgorithm	Specifies the hash algorithm used in SignedProperties reference.
SignedPropertiesReferenceID	Specifies the ID for Reference element that points to SignedProperties element.
SignedPropertiesReferenceInclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.
SignedPropertiesReferenceIndex	Specifies the index of SignedProperties reference.
SignedSignaturePropertiesID	Specifies the ID for SignedSignatureProperties element.
SigningCertificatesChain	The indicator of which certificates should be/are included as the signing chain.
SigningCertificatesHashAlgorithm	Specifies the hash algorithm used for SigningCertificates.
SigPolicyDescription	signature policy description.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyHash	The EPES policy hash.
SigPolicyHashAlgorithm	The hash algorithm that was used to generate the EPES policy hash.
SigPolicyID	The EPES policy ID.
SigPolicyNoticeNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyURI	The EPES policy URI.
StripWhitespace	Controls whether excessive whitespace characters should be stripped off when loading the document.
TimestampCanonicalizationMethod	Specifies canonicalization method used in timestamp.
TimestampValidationDataDetails	Specifies timestamp validation data details to include to the signature.
UseHMACSigning	Whether to use HMAC signing.
UsePSS	Whether to use RSASSA-PSS algorithm.
ValidationDataRefsDetails	Specifies validation data references details to include to the signature.
ValidationDataRefsHashAlgorithm	Specifies the hash algorithm used in validation data references.
ValidationDataValuesDetails	Specifies validation data values details to include to the signature.
WriteBOM	Specifies whether byte-order mark should be written when saving the document.
WSSEPrefix	Specifies the WSSE prefix.
WSUPrefix	Specifies the WSU prefix.
WSUTimestampCreated	Specifies the message creation time.
WSUTimestampCreatedFormat	Specifies the date time format for message creation time.
WSUTimestampCreatedTimeZoneOffset	Specifies the time zone offset for message creation time.
WSUTimestampExpires	Specifies the message expiration time.
WSUTimestampExpiresFormat	Specifies the date time format for message expiration time.
WSUTimestampExpiresTimeZoneOffset	Specifies the time zone offset for message expiration time.
WSUTimestampID	Specifies the ID for wsu:Timestamp element.
XAdESPrefix	Specifies the XAdES prefix.
XAdESv141Prefix	Specifies the XAdES v1.4.1 prefix.
XMLFormatting	Specifies the signature XML formatting.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the component.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client components created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
PKICache	Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.
PKICachePath	Specifies the file system path where cached PKI data is stored.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseCRLObjectCaching	Specifies whether reuse of loaded CRL objects is enabled.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOCSPResponseObjectCaching	Specifies whether reuse of loaded OCSP response objects is enabled.
UseOwnDNSResolver	Specifies whether the client components should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.
XMLRDNDescriptorName[OID]	Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.
XMLRDNDescriptorPriority[OID]	Specifies the priority of descriptor names associated with a specific OID.
XMLRDNDescriptorReverseOrder	Specifies whether to reverse the order of descriptors in RDN.
XMLRDNDescriptorSeparator	Specifies the separator used between descriptors in RDN.

CanonicalizationMethod Property (SOAPQuickSigner Component)

Specifies XML canonicalization method to use.

Syntax

property CanonicalizationMethod: TsbxXMLCanonicalizationMethods read get_CanonicalizationMethod write set_CanonicalizationMethod;

TsbxXMLCanonicalizationMethods = (
  cxcmNone,
  cxcmCanon,
  cxcmCanonComment,
  cxcmExclCanon,
  cxcmExclCanonComment,
  cxcmMinCanon,
  cxcmCanon_v1_1,
  cxcmCanonComment_v1_1
);

Default Value

cxcmCanon

Remarks

Use this property to specify the method for XML canonicalization of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

Supported canonicalization methods:


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

EmbedCertificateMethod Property (SOAPQuickSigner Component)

Controls the certificate disposition within the signature.

Syntax

property EmbedCertificateMethod: TsbxWSSEmbedCertificateMethods read get_EmbedCertificateMethod write set_EmbedCertificateMethod;

TsbxWSSEmbedCertificateMethods = (
  cwecInSignature,
  cwecInBinarySecurityToken,
  cwecInSignedBinarySecurityToken,
  cwecInBinarySecurityTokenAndSignature,
  cwecNone
);

Default Value

cwecInBinarySecurityToken

Remarks

This property controls the method of embedding the signing certificate(s) into the signature if WS-Security signature type is used.

Supported values:


cwecInSignature	`0`	Embed certificate(s) into the signature
cwecInBinarySecurityToken	`1`	Embed certificate(s) into the BinarySecurityToken element
cwecInSignedBinarySecurityToken	`2`	Embed certificate(s) into the BinarySecurityToken element and sign them
cwecInBinarySecurityTokenAndSignature	`3`	Embed certificate(s) into the BinarySecurityToken element and the signature
cwecNone	`4`	Don't embed certificate(s) into the BinarySecurityToken element or the signature

Encoding Property (SOAPQuickSigner Component)

Specifies XML encoding.

Syntax

property Encoding: String read get_Encoding write set_Encoding;

Default Value

Remarks

Use this property to specify the encoding to apply to the XML documents.

ExternalCrypto Property (SOAPQuickSigner Component)

Provides access to external signing and DC parameters.

Syntax

property ExternalCrypto: TsbxExternalCrypto read get_ExternalCrypto;

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

This property is read-only.

Please refer to the ExternalCrypto type for a complete list of fields.

FIPSMode Property (SOAPQuickSigner Component)

Reserved.

Syntax

property FIPSMode: Boolean read get_FIPSMode write set_FIPSMode;

Default Value

false

Remarks

This property is reserved for future use.

HashAlgorithm Property (SOAPQuickSigner Component)

Specifies the hash algorithm to be used.

Syntax

property HashAlgorithm: String read get_HashAlgorithm write set_HashAlgorithm;

Default Value

'SHA256'

Remarks

Use this property to set the hash algorithm for signature calculation.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

InputFile Property (SOAPQuickSigner Component)

Specifies the SOAP message to be signed.

Syntax

property InputFile: String read get_InputFile write set_InputFile;

Default Value

Remarks

Provide a full path to the SOAP message to be signed.

OutputFile Property (SOAPQuickSigner Component)

A file where the signed SOAP message will be saved.

Syntax

property OutputFile: String read get_OutputFile write set_OutputFile;

Default Value

Remarks

Provide a full path to the file where the signed SOAP message should be saved.

References Property (SOAPQuickSigner Component)

A list of references to the data to be signed.

Syntax

property References: TsbxXMLReferenceList read get_References;

Remarks

Electronic signature is computed over a set of data pieces. Each piece of data to be signed is specified by a reference.

This property is read-only and not available at design time.

Please refer to the XMLReference type for a complete list of fields.

SecurityHeaderIndex Property (SOAPQuickSigner Component)

Specifies the SecurityHeader index.

Syntax

property SecurityHeaderIndex: Integer read get_SecurityHeaderIndex write set_SecurityHeaderIndex;

Default Value

-1

Remarks

Use this property to specify the index of SecurityHeader element where to put the signature. If the specified SecurityHeader element doesn't exist then a new SecurityHeader element will be created. The default value is "-1", in this case a new SecurityHeader element will be always created.

SignatureType Property (SOAPQuickSigner Component)

The SOAP signature type to use.

Syntax

property SignatureType: TsbxSOAPSignatureTypes read get_SignatureType write set_SignatureType;

TsbxSOAPSignatureTypes = (
  sstUnknown,
  sstWSSSignature,
  sstSOAPSignature
);

Default Value

sstWSSSignature

Remarks

Use this property to specify the signature type to use when forming the signature.

Supported values:


sstUnknown	`0`	Unknown signature
sstWSSSignature	`1`	Uses Web Services Security (WS-Security, WSS) signature. It is implemented according to the OASIS Web Services Security extension to SOAP
sstSOAPSignature	`2`	Uses SOAP signature. It is implemented according to the SOAP Security Extensions: Digital Signature.

SigningCertificate Property (SOAPQuickSigner Component)

The certificate to be used for signing.

Syntax

property SigningCertificate: TsbxCertificate read get_SigningCertificate write set_SigningCertificate;

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

SigningChain Property (SOAPQuickSigner Component)

The signing certificate chain.

Syntax

property SigningChain: TsbxCertificateList read get_SigningChain write set_SigningChain;

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

AddBodyReference Method (SOAPQuickSigner Component)

Creates a new XML reference to the Body element of the SOAP message.

Syntax

function AddBodyReference(CustomId: String; AutoGenerateId: Boolean): Integer;

Remarks

Use this method to add a reference to the Body element of the SOAP message.

The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.

Use CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm to use.

The method returns the index of the new reference entry in the References collection.

AddDataReference Method (SOAPQuickSigner Component)

Creates a new XML reference to the specified data.

Syntax

function AddDataReference(DataURI: String; Data: TBytes): Integer;

Remarks

Use this method to add a reference to the custom data. Pass the reference's URI via DataURI parameter.

Use HashAlgorithm property to specify the hash algorithm to use.

The method returns the index of the new reference entry in the References collection.

AddKnownNamespace Method (SOAPQuickSigner Component)

Adds known prefix and correspondent namespace URI.

Syntax

procedure AddKnownNamespace(Prefix: String; URI: String);

Remarks

Use this method to add a known prefix and namespace URI that are used in XPath expression within XMLElement/XMLNode property, and within TargetXMLElement and XPathPrefixList properties of the references.

AddReference Method (SOAPQuickSigner Component)

Creates a new XML reference to the specified XML element.

Syntax

function AddReference(TargetXmlElement: String; CustomId: String; AutoGenerateId: Boolean): Integer;

Remarks

Use this method to add a reference to a particular XML element.

Use CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm to use.

The method returns the index of the new reference entry in the References collection.

Config Method (SOAPQuickSigner Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (SOAPQuickSigner Component)

Performs an additional action.

Syntax

function DoAction(ActionID: String; ActionParams: String): String;

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Common ActionIDs:


Action	Parameters	Returned value	Description
ResetTrustedListCache	none	none	Clears the cached list of trusted lists.
ResetCertificateCache	none	none	Clears the cached certificates.
ResetCRLCache	none	none	Clears the cached CRLs.
ResetOCSPResponseCache	none	none	Clears the cached OCSP responses.

ExtractAsyncData Method (SOAPQuickSigner Component)

Extracts user data from the DC signing service response.

Syntax

function ExtractAsyncData(AsyncReply: String): String;

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

GetInnerXML Method (SOAPQuickSigner Component)

Get the inner XML content of the selected XML element.

Syntax

function GetInnerXML(XPath: String): String;

Remarks

Call this method to get the inner XML content of the selected XML element.

GetOuterXML Method (SOAPQuickSigner Component)

Get the outer XML content of the selected XML element.

Syntax

function GetOuterXML(XPath: String): String;

Remarks

Call this method to get the outer XML content of the selected XML element.

GetTextContent Method (SOAPQuickSigner Component)

Get the text content of the selected XML element.

Syntax

function GetTextContent(XPath: String): String;

Remarks

Call this method to get the text content of the selected XML element.

Reset Method (SOAPQuickSigner Component)

Resets the component settings.

Syntax

procedure Reset();

Remarks

Reset is a generic method available in every component.

SetInnerXML Method (SOAPQuickSigner Component)

Set the inner XML content of the selected XML element.

Syntax

procedure SetInnerXML(XPath: String; Value: String);

Remarks

Call this method to set the inner XML content of the selected XML element.

SetTextContent Method (SOAPQuickSigner Component)

Set the text content of the selected XML element.

Syntax

procedure SetTextContent(XPath: String; Value: String);

Remarks

Call this method to set the text content of the selected XML element.

Sign Method (SOAPQuickSigner Component)

Signs the SOAP message.

Syntax

procedure Sign();

Remarks

Call this method to generate a signed SOAP message.

SignAsyncBegin Method (SOAPQuickSigner Component)

Initiates the asynchronous signing operation.

Syntax

function SignAsyncBegin(): String;

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (SOAPQuickSigner Component)

Completes the asynchronous signing operation.

Syntax

procedure SignAsyncEnd(AsyncReply: String);

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

SignExternal Method (SOAPQuickSigner Component)

Signs the document using an external signing facility.

Syntax

procedure SignExternal();

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the component fires ExternalSign event which allows to pass the hash value for signing.

Error Event (SOAPQuickSigner Component)

Information about errors during signing.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The event is fired in case of exceptional conditions during signing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to SOAP.

ExternalSign Event (SOAPQuickSigner Component)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

type TExternalSignEvent = procedure (
  Sender: TObject;
  const OperationId: String;
  const HashAlgorithm: String;
  const Pars: String;
  const Data: String;
  var SignedData: String
) of Object;

property OnExternalSign: TExternalSignEvent read FOnExternalSign write FOnExternalSign;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The component uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

FormatElement Event (SOAPQuickSigner Component)

Reports the XML element that is currently being processed.

Syntax

type TFormatElementEvent = procedure (
  Sender: TObject;
  var StartTagWhitespace: String;
  var EndTagWhitespace: String;
  Level: Integer;
  const Path: String;
  HasChildElements: Boolean
) of Object;

property OnFormatElement: TFormatElementEvent read FOnFormatElement write FOnFormatElement;

Remarks

Path and Level specify the path to the XML element being processed and its nesting level, respectively.

HasChildElements specify if processed XML element has child elements.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

FormatText Event (SOAPQuickSigner Component)

Reports XML text that is currently being processed.

Syntax

type TFormatTextEvent = procedure (
  Sender: TObject;
  var Text: String;
  TextType: Integer;
  Level: Integer;
  const Path: String
) of Object;

property OnFormatText: TFormatTextEvent read FOnFormatText write FOnFormatText;

Remarks

TextType parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; Path and Level specify the path to the XML element and its nesting level.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

Notification Event (SOAPQuickSigner Component)

This event notifies the application about an underlying control flow event.

Syntax

type TNotificationEvent = procedure (
  Sender: TObject;
  const EventID: String;
  const EventParam: String
) of Object;

property OnNotification: TNotificationEvent read FOnNotification write FOnNotification;

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This component can fire this event with the following EventID values:


MessageLoaded	Notifies the application that the SOAP message has been loaded. This is a backwards-compatibility-only notification: use OnMessageLoaded event instead.
RetrieveQualifyingProperties	TBD
SignaturesLoaded	Notifies the application that the component has finished loading signatures.
BeforeTimestamp	This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings.
TimestampError	This event is only fired if the component failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info.
TimestampRequest	A timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

ResolveReference Event (SOAPQuickSigner Component)

Asks the application to resolve a reference.

Syntax

type TResolveReferenceEvent = procedure (
  Sender: TObject;
  ReferenceIndex: Integer;
  const URI: String
) of Object;

property OnResolveReference: TResolveReferenceEvent read FOnResolveReference write FOnResolveReference;

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

Bytes
TBytes (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

CA
Boolean
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

CAKeyID
TBytes (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the SubjectKeyID setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

CertType
TsbxCertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager component to load or create new certificate and certificate requests objects.

CRLDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

Curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

Fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

FriendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

Handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

HashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use SigAlgorithm to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via IssuerRDN.

IssuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

KeyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the KeyBits, Curve, and PublicKeyBytes properties to get more details about the key the certificate contains.

KeyBits
Integer (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the PublicKeyBytes or PrivateKeyBytes property would typically contain auxiliary values, and therefore be longer.

KeyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the Fingerprint property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

KeyUsage
Integer
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

KeyValid
Boolean (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

OCSPNoCheck
Boolean
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

Origin
Integer (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

PolicyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

PrivateKeyBytes
TBytes (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

PrivateKeyExists
Boolean (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from PrivateKeyBytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

PrivateKeyExtractable
Boolean (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

PublicKeyBytes
TBytes (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

Qualified
Boolean (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

QualifiedStatements
TsbxQualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

Qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

SelfSigned
Boolean (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
TBytes
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

SigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

Source
TsbxPKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via SubjectRDN.

SubjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main SubjectRDN field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

SubjectKeyID
TBytes
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The SubjectKeyID and CAKeyID properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

SubjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

Valid
Boolean (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

ValidFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

ValidTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

constructor Create();

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

AsyncDocumentID

CustomParams

Data

ExternalHashCalculation

Fields

AsyncDocumentID
String
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CustomParams
String
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

Data
String
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

ExternalHashCalculation
Boolean
Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth component.

If set to true, the component will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

HashAlgorithm
String
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

KeyID
String
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

KeySecret
String
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the KeyID topic.

Method
TsbxAsyncSignMethods
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

Mode
TsbxExternalCryptoModes
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

PublicKeyAlgorithm
String
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

constructor Create();

Creates a new ExternalCrypto object with default field values.

XMLReference Type

Represents an XML reference element.

Remarks

XMLReference specifies the digest algorithm and digest value, and, optionally: an identifier of the object being signed, the type of the object, and/or a list of transforms to be applied prior to digesting.

The following fields are available:

Fields

AutoGenerateElementId
Boolean
Default Value: False

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

CanonicalizationMethod
TsbxXMLCanonicalizationMethods
Default Value: 0

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

CustomElementId
String
Default Value: ""

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

DataObjectDescription
String
Default Value: ""

This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.

DataObjectEncoding
String
Default Value: ""

This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.

DataObjectIdentifier
String
Default Value: ""

This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.

DataObjectMimeType
String
Default Value: ""

This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.

DigestValue
TBytes
Default Value: ""

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

Handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

HasDataObjectFormat
Boolean
Default Value: False

Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.

Check this property to find out if the reference has an associated DataObjectFormat element.

HashAlgorithm
String
Default Value: "SHA256"

Specifies the hash algorithm to be used.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

HasURI
Boolean
Default Value: True

Specifies whether the URI is set (even when it is empty).

ID
String
Default Value: ""

A user-defined identifier (ID) attribute of this Reference element.

InclusiveNamespacesPrefixList
String
Default Value: ""

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

ReferenceType
String
Default Value: ""

The Reference's type attribute as defined in XMLDSIG specification.

TargetData
TBytes
Default Value: ""

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

TargetType
TsbxXMLReferenceTargetTypes
Default Value: 0

The reference's target type to use.

Use this property to specify the reference's target type to use when forming the signature.

TargetXMLElement
String
Default Value: ""

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:


""	an empty string indicates the Document element.
"#id"	indicates an XML element with specified Id.
XPointer expression	indicates an XML element selected using XPointer expression. Use the AddKnownNamespace method to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via AddKnownNamespace method.
Node name	indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data".

URI
String
Default Value: ""

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

UseBase64Transform
Boolean
Default Value: False

Specifies whether Base64 transform is included in transform chain.

UseEnvelopedSignatureTransform
Boolean
Default Value: False

Specifies whether enveloped signature transform is included in transform chain.

UseXPathFilter2Transform
Boolean
Default Value: False

Specifies whether XPath Filter 2.0 transform is included in transform chain.

UseXPathTransform
Boolean
Default Value: False

Specifies whether XPath transform is included in transform chain.

ValidationResult
Boolean (read-only)
Default Value: False

The outcome of the cryptographic reference validation.

XPathExpression
String
Default Value: ""

Use this property to specify XPath expression for XPath transform of the reference.

XPathFilter2Expressions
String
Default Value: ""

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

XPathFilter2Filters
String
Default Value: ""

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:


"intersect"	Intersect filter computes the intersection of the selected subtrees with the filter node-set.
"subtract"	Subtract filter computes the subtraction of the selected subtrees with the filter node-set.
"union"	Union filter computes the union of the selected subtrees with the filter node-set.

XPathFilter2PrefixList
String
Default Value: ""

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

XPathPrefixList
String
Default Value: ""

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

Constructors

constructor Create();

Creates a new XML reference element.

constructor Create(valID: String);

Creates a new XML reference element from its ID .

constructor Create(valID: String; valURI: String);

Creates a new XML reference element from its ID and URI reference to the external data.

Config Settings (SOAPQuickSigner Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

SOAPQuickSigner Config Settings

AddAllDataObjectsTimestamp: Whether to add all data objects timestamp during signing.

If this property is set to True, the all data objects timestamp (xades:AllDataObjectsTimeStamp element) will be added.

BinarySecurityTokenID: Specifies the ID for BinarySecurityToken element.

This property contains the identifier (ID) attribute of the wsse:BinarySecurityToken element.

BinarySecurityTokenType: Specifies the token type for BinarySecurityToken element.

This property contains the token type (TokenType) attribute of the wsse:BinarySecurityToken element.

The supported values are: "X509v3", "X509PKIPathv1", "PKCS7", "Default" or fully qualified URLs for the first three values.

For default value, the component uses the "X509v3" type if one signing certificate is provided, and uses the "PKCS7" type otherwise.

ClaimedRolesXML: The XML content of the claimed roles.

Use this property to get/specify the XML content of the claimed roles element.

ClaimedRoleText: The text of the claimed role.

Use this property to get/specify the text of the first claimed role.

CommitmentTypeIndicationAllSignedDataObjects[Index]: Specifies the CommitmentTypeIndication's AllSignedDataObjects.

This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationCount: The number of the CommitmentTypeIndication elements.

Returns the number of the xades:CommitmentTypeIndication elements available.

CommitmentTypeIndicationIdentifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.

This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDescription[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.

This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDocumentationReferences[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierQualifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationObjectReference[Index]: Specifies the CommitmentTypeIndication's ObjectReference.

This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationQualifiersXML[Index]: The XML content of the CommitmentTypeIndication's Qualifiers.

This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element.

DataObjectFormatCount: The number of the DataObjectFormat elements.

Returns the number of the xades:DataObjectFormat elements available.

DataObjectFormatDescription[Index]: Specifies the DataObjectFormat's Description.

This property contains textual information related to the signed data object in the DataObjectFormat's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatEncoding[Index]: Specifies the DataObjectFormat's Encoding.

This property contains an indication of the encoding format of the signed data object in the DataObjectFormat's Encoding element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatMimeType[Index]: Specifies the DataObjectFormat's MimeType.

This property contains an indication of the MIME type of the signed data object in the DataObjectFormat's MimeType element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Identifier.

This property contains an identifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Identifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDescription[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Description.

This property contains an identifier's description indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDocumentationReferences[Index]: Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's DocumentationReferences element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierQualifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's IdentifierQualifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectReference[Index]: Specifies the DataObjectFormat's ObjectReference.

This property contains the DataObjectFormat's ObjectReference element that reference the ds:Reference element of the ds:Signature corresponding with the data object qualified by this property.

For example, if the corresponding ds:Reference element has an Id "reference-id-1", then you should set this property to "#reference-id-1" value.

Index value could be omitted for the first DataObjectFormat element.

ExclusiveCanonicalizationPrefix: Specifies the exclusive canonicalization prefix.

Specifies the prefix for the ec:InclusiveNamespaces element for the exclusive canonicalization.

Default value is "ec". In this case "ec:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

HMACKey: The key value for HMAC.

Use this property to set the HMAC key. The component uses base16 (hex) encoding for this configuration value.

HMACOutputLength: Sets the length of the HMAC output.

Use this property to configure the length of the HMAC output, in bytes.

HMACSigningUsed: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. TBD

IgnoreTimestampFailure: Whether to ignore time-stamping failure during signing.

If this property is set to True, any failure during time-stamping process will be ignored.

IncludeKey: Specifies whether to include the signing key to the signature.

Set this property to True to include the public part of the signing key to the signature.

IncludeKeyValue: Specifies whether the key value must be included to the signature.

Set this property to True if the key value (its public part) should be included to the signature.

IncludeKnownRevocationInfoToSignature: Whether to include custom revocation info to the signature.

This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain.

InclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList.

Use this property to read/specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

KeyInfoCustomXML: The custom XML content for KeyInfo element.

Use this property to specify the custom XML content of the ds:KeyInfo element.

The empty elements in the custom XML content act as a placeholder for auto-generated elements.

For example to change the order of ds:KeyValue and ds:X509Data auto-generated elements use the value: "<X509Data/><KeyValue/>"

KeyInfoDetails: Specifies the signing key info details to include to the signature.

Contains a comma-separated list of values that specifies which signing key info details to include to the signature.

Supported values are:


certificate		Base64-encoded [X509v3] certificate is placed to the signature
issuerserial		X.509 issuer distinguished name/serial number pair are placed to the signature
subjectname		X.509 subject distinguished name is placed to the signature
ski		Base64 encoded plain (i.e. non-DER-encoded) value of a X509 V.3 SubjectKeyIdentifier extension is placed to the signature
crl		Base64-encoded certificate revocation list (CRL) is placed to the signature

KeyInfoID: Specifies the ID for KeyInfo element.

This property contains the identifier (ID) attribute of the ds:KeyInfo element.

KeyName: Contains information about the key used for signing.

The KeyName element contains a string value (with significant whitespaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, the KeyName element contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of the KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.

NormalizeNewLine: Controls whether newline combinations should be automatically normalized.

If set to true (the default value), the component will normalize any non-compliant newline characters to match those appropriate for the operating system.

PolicyDescription: signature policy description.

This property specifies the Description of the signature policy.

PolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyUNNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PrependCustomXML: The custom XML content that prepended before signature.

Use this property to specify the custom XML content that should be prepended before ds:Signature element.

ProductionPlace: Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

PSSUsed: Whether to use RSASSA-PSS algorithm.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. This is an alias for UsePSS.

QualifyingPropertiesID: Specifies the ID for QualifyingProperties element.

This property contains the identifier (ID) attribute of the xades:QualifyingProperties element.

QualifyingPropertiesObjectID: Specifies the ID for object with QualifyingProperties element.

This property contains the identifier (ID) attribute of the ds:Object element that contains xades:QualifyingProperties element.

QualifyingPropertiesReferenceCount: The number of the QualifyingPropertiesReference elements.

Returns the number of the xades:QualifyingPropertiesReference elements available.

QualifyingPropertiesReferenceID[Index]: Specifies the QualifyingPropertiesReference's ID.

This property contains an identifier (ID) attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

QualifyingPropertiesReferenceURI[Index]: Specifies the QualifyingPropertiesReference's URI.

This property contains an URI attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

RefsTimestampType: Specifies references timestamp type to include to the signature.

Contains a comma-separated list of values that specifies which references timestamp type to include to the signature when signature upgraded to XAdES-X or XAdES-E-X form.

Supported values are:


SigAndRefs		SigAndRefs timestamp
RefsOnly		RefsOnly timestamp

SecurityHeaderIndex: Specifies the SecurityHeader index.

SecurityHeaderMustUnderstand: Specifies the MustUnderstand for SecurityHeader element.

This property contains the MustUnderstand attribute of the wsse:SecurityHeader element.

SecurityTokenReferenceID: Specifies the ID for SecurityTokenReference element.

This property contains the identifier (ID) attribute of the wsse:SecurityTokenReference element.

SecurityTokenReferenceTokenType: Specifies the token type for SecurityTokenReference element.

This property contains the token type (wsse11:TokenType) attribute of the wsse:SecurityTokenReference element.

SignatureID: Specifies the ID for Signature element.

This property contains the identifier (ID) attribute of the ds:Signature element.

SignaturePrefix: Specifies the signature prefix.

Specifies the prefix for the Signature elements.

Default value is "ds". In this case "ds:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

SignatureValueID: Specifies the ID for SignatureValue element.

This property contains the identifier (ID) attribute of the ds:SignatureValue element.

SignedInfoID: Specifies the ID for SignedInfo element.

This property contains the identifier (ID) attribute of the ds:SignedInfo element.

SignedPropertiesID: Specifies the ID for SignedProperties element.

This property contains the identifier (ID) attribute of the xades:SignedProperties element.

SignedPropertiesReferenceCanonicalizationMethod: Specifies the canonicalization method used in SignedProperties reference.

Use this property to specify the canonicalization method for the canonicalization transform of the ds:Reference element that points to xades:SignedProperties element. Use cxcmNone value to not to include canonicalization transform in transform chain.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

SignedPropertiesReferenceHashAlgorithm: Specifies the hash algorithm used in SignedProperties reference.

Use this property to specify the hash algorithm to be used for the ds:Reference element that points to xades:SignedProperties element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

SignedPropertiesReferenceID: Specifies the ID for Reference element that points to SignedProperties element.

This property contains the identifier (ID) attribute of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceInclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceIndex: Specifies the index of SignedProperties reference.

Use this property to specify the reference's index for the ds:Reference element that points to xades:SignedProperties element.

SignedSignaturePropertiesID: Specifies the ID for SignedSignatureProperties element.

This property contains the identifier (ID) attribute of the xades:SignedSignatureProperties element.

SigningCertificatesChain: The indicator of which certificates should be/are included as the signing chain.

Use this property to check or set the indices of the signing chain included in the signature. The none and all placeholders are supported.

SigningCertificatesHashAlgorithm: Specifies the hash algorithm used for SigningCertificates.

Use this property to specify the hash algorithm to be used for xades:SigningCertificates element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

SigPolicyDescription: signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription).

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText);

SigPolicyHash: The EPES policy hash.

Use this configuration setting to provide the EPES policy hash.

SigPolicyHashAlgorithm: The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash.

SigPolicyID: The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5).

SigPolicyNoticeNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers).

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization).

SigPolicyURI: The EPES policy URI.

Assign the EPES policy URI to this setting.

StripWhitespace: Controls whether excessive whitespace characters should be stripped off when loading the document.

Set this property to true to have the component eliminate excessive whitespace from the document on loading.

TimestampCanonicalizationMethod: Specifies canonicalization method used in timestamp.

Use this property to specify the canonicalization method used in timestamp.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

TimestampValidationDataDetails: Specifies timestamp validation data details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

UseHMACSigning: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography.

UsePSS: Whether to use RSASSA-PSS algorithm.

ValidationDataRefsDetails: Specifies validation data references details to include to the signature.

Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form.

Supported values are:


certificate		References to X.509 certificates
crl		References to certificate revocation lists (CRL)
ocsp		References to OCSP responses

ValidationDataRefsHashAlgorithm: Specifies the hash algorithm used in validation data references.

Use this property to specify the hash algorithm used to compute hashes for validation data references.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

ValidationDataValuesDetails: Specifies validation data values details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

WriteBOM: Specifies whether byte-order mark should be written when saving the document.

Set this property to False to disable writing byte-order mark (BOM) when saving the XML document in Unicode encoding.

WSSEPrefix: Specifies the WSSE prefix.

Specifies the prefix for the WS-Security elements.

Default value is "wsse". In this case "wsse:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

WSUPrefix: Specifies the WSU prefix.

Specifies the prefix for the WS Utility elements.

Default value is "wsu". In this case "wsu:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

WSUTimestampCreated: Specifies the message creation time.

This property contains the message creation time (wsu:Created element of the wsu:Timestamp element).

WSUTimestampCreatedFormat: Specifies the date time format for message creation time.

This property contains the date time format for the message creation time (wsu:Created element of the wsu:Timestamp element).

Supported values:


YYYY		Year (eg 1997)
YYYY-MM		Year and month (eg 1997-07)
YYYY-MM-DD		Complete date (eg 1997-07-16)
YYYY-MM-DDThh:mmTZD		Complete date plus hours and minutes (eg 1997-07-16T19:20+01:00)
YYYY-MM-DDThh:mm:ssTZD		Complete date plus hours, minutes and seconds (eg 1997-07-16T20:20:30Z)
YYYY-MM-DDThh:mm:ss.sTZD		Default. Complete date plus hours, minutes, seconds and a decimal fraction of a second (eg 1997-07-16T20:20:30.4Z)
YYYY-MM-DDThh:mm:ss.sssTZD		Complete date plus hours, minutes, seconds and a fraction of a second (eg 1997-07-16T20:20:30.451Z)

WSUTimestampCreatedTimeZoneOffset: Specifies the time zone offset for message creation time.

This property contains the time zone offset for the message creation time (wsu:Created element of the wsu:Timestamp element).

WSUTimestampExpires: Specifies the message expiration time.

This property contains the message expiration time (wsu:Expires element of the wsu:Timestamp element).

WSUTimestampExpiresFormat: Specifies the date time format for message expiration time.

This property contains the date time format for the message expiration time (wsu:Expires element of the wsu:Timestamp element).

WSUTimestampExpiresTimeZoneOffset: Specifies the time zone offset for message expiration time.

This property contains the time zone offset for the message expiration time (wsu:Expires element of the wsu:Timestamp element).

WSUTimestampID: Specifies the ID for wsu:Timestamp element.

This property contains the identifier (ID) attribute of the wsu:Timestamp element.

XAdESPrefix: Specifies the XAdES prefix.

Specifies the prefix for the XAdES elements.

Default value is "xades". In this case "xades:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

XAdESv141Prefix: Specifies the XAdES v1.4.1 prefix.

Specifies the prefix for the XAdES v1.4.1 elements.

Default value is "xadesv141". In this case "xadesv141:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

XMLFormatting: Specifies the signature XML formatting.

Use this property to specify how the signature should be formatted.

Supported values:


"" or "none"		no formatting (by default).
"auto"		enables auto-formatting, equivalent to: "indent: 1; indent-char: tab; base64-max-length: 64; starting-level: node"

Custom values, contains a list of value pairs ("name:value") separated by comma or semicolon:


indent		specifies indentation level (default is 1)
indent-char		specifies indentation character: "space" or "tab" (default)
base64-max-length		specifies max length of base64 encoded data, such as signature value, certificate data and etc. (default is 64)
starting-level		specifies starting indentation level: non-negative integer or "node" - detected based on parent node, or "root" - detected based on number of parent nodes to a document element (default is "node").
indent-before-main		specifies if whitespace characters should be inserted before a main (ds:Signature) element: "auto" (default), "yes" or "no"

For more preciese formatting use OnFormatText and OnFormatElement events.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the component.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the component.

Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

PKICache: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.

The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached.

Supported Values:


certificate	Enables caching of certificates.
crl	Enables caching of Certificate Revocation Lists (CRLs).
ocsp	Enables caching of OCSP (Online Certificate Status Protocol) responses.

Example (default value): PKICache=certificate,crl,ocsp In this example, the component caches certificates, CRLs, and OCSP responses.

PKICachePath: Specifies the file system path where cached PKI data is stored.

The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts.

The default value is an empty string - no cached PKI data is stored on disk.

Example: PKICachePath=C:\Temp\cache In this example, the cached PKI data is stored in the C:\Temp\cache directory.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the component. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the component is set to "local", the property returns/restores the rules from/to the internal storage of the component. If StaticDNS of the component is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the components.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseCRLObjectCaching: Specifies whether reuse of loaded CRL objects is enabled.

This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used.

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOCSPResponseObjectCaching: Specifies whether reuse of loaded OCSP response objects is enabled.

This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used.

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

XMLRDNDescriptorName[OID]: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.

This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures.

The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing.

Syntax: Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2");

Where:

OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map.

PrimaryName: The main descriptor name used in the XML signature when the OID is encountered.

Alias1, Alias2, ...: Optional alternative names recognized during parsing.

Usage Examples:

Map OID 2.5.4.5 to SERIALNUMBER: Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER");

Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS: Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS");

XMLRDNDescriptorPriority[OID]: Specifies the priority of descriptor names associated with a specific OID.

This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing.

XMLRDNDescriptorReverseOrder: Specifies whether to reverse the order of descriptors in RDN.

Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1).

XMLRDNDescriptorSeparator: Specifies the separator used between descriptors in RDN.

Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value.

Trappable Errors (SOAPQuickSigner Component)

SOAPQuickSigner Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
33554433	The input file does not exist (`SB_ERROR_SOAP_INPUTFILE_NOT_EXISTS`)
33554434	Invalid key type (`SB_ERROR_SOAP_INVALID_KEY_TYPE`)
33554435	No signature found to complete the asynchronous signing (`SB_ERROR_SOAP_SIGNATURE_NOT_FOUND`)
33554436	Unsupported signature type (`SB_ERROR_SOAP_UNSUPPORTED_SIGNATURE_TYPE`)
33554437	Unexpected HTTP status code (`SB_ERROR_SOAP_UNEXPECTED_HTTP_STATUS_CODE`)
33554438	SOAP service failed (`SB_ERROR_SOAP_SERVICE_FAILED`)