AuthenticodeVerifier Component

Properties   Methods   Events   Config Settings   Errors  

The AuthenticodeVerifier component verifies digital signatures over executable files (EXE) and dynamically linked libraries (DLL).

Syntax

TsbxAuthenticodeVerifier

Remarks

Use this component to verify signatures created over executable files.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

ActualChecksum Property (AuthenticodeVerifier Component)

Returns the executable's checksum computed during signature verification.

Syntax

__property int ActualChecksum = { read=FActualChecksum };

Default Value

0

Remarks

Use this property to get the actual checksum of the executable.

This property is read-only and not available at design time.

Data Type

Integer

AllSignaturesValid Property (AuthenticodeVerifier Component)

The cumulative validity of all signatures.

Syntax

__property bool AllSignaturesValid = { read=FAllSignaturesValid };

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

Data Type

Boolean

BlockedCertCount Property (AuthenticodeVerifier Component)

The number of records in the BlockedCert arrays.

Syntax

__property int BlockedCertCount = { read=FBlockedCertCount, write=FSetBlockedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• BlockedCertBytes
• BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray BlockedCertBytes[int BlockedCertIndex] = { read=FBlockedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 BlockedCertHandle[int BlockedCertIndex] = { read=FBlockedCertHandle, write=FSetBlockedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CertCount Property (AuthenticodeVerifier Component)

The number of records in the Cert arrays.

Syntax

__property int CertCount = { read=FCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CertBytes
• CertCA
• CertCAKeyID
• CertCRLDistributionPoints
• CertCurve
• CertFingerprint
• CertFriendlyName
• CertHandle
• CertHashAlgorithm
• CertIssuer
• CertIssuerRDN
• CertKeyAlgorithm
• CertKeyBits
• CertKeyFingerprint
• CertKeyUsage
• CertKeyValid
• CertOCSPLocations
• CertPolicyIDs
• CertPublicKeyBytes
• CertSelfSigned
• CertSerialNumber
• CertSigAlgorithm
• CertSubject
• CertSubjectKeyID
• CertSubjectRDN
• CertValidFrom
• CertValidTo

The array indices start at 0 and end at CertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray CertBytes[int CertIndex] = { read=FCertBytes };

Remarks

Returns the raw certificate data in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCA Property (AuthenticodeVerifier Component)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Syntax

__property bool CertCA[int CertIndex] = { read=FCertCA };

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertCAKeyID Property (AuthenticodeVerifier Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray CertCAKeyID[int CertIndex] = { read=FCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCRLDistributionPoints Property (AuthenticodeVerifier Component)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

__property String CertCRLDistributionPoints[int CertIndex] = { read=FCertCRLDistributionPoints };

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertCurve Property (AuthenticodeVerifier Component)

Specifies the elliptic curve of the EC public key.

Syntax

__property String CertCurve[int CertIndex] = { read=FCertCurve };

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertFingerprint Property (AuthenticodeVerifier Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray CertFingerprint[int CertIndex] = { read=FCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertFriendlyName Property (AuthenticodeVerifier Component)

Contains an associated alias (friendly name) of the certificate.

Syntax

__property String CertFriendlyName[int CertIndex] = { read=FCertFriendlyName };

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CertHandle[int CertIndex] = { read=FCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Long64

CertHashAlgorithm Property (AuthenticodeVerifier Component)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

__property String CertHashAlgorithm[int CertIndex] = { read=FCertHashAlgorithm };

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuer Property (AuthenticodeVerifier Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String CertIssuer[int CertIndex] = { read=FCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuerRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String CertIssuerRDN[int CertIndex] = { read=FCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyAlgorithm Property (AuthenticodeVerifier Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String CertKeyAlgorithm[int CertIndex] = { read=FCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyBits Property (AuthenticodeVerifier Component)

Returns the length of the public key.

Syntax

__property int CertKeyBits[int CertIndex] = { read=FCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyFingerprint Property (AuthenticodeVerifier Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray CertKeyFingerprint[int CertIndex] = { read=FCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertKeyUsage Property (AuthenticodeVerifier Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int CertKeyUsage[int CertIndex] = { read=FCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyValid Property (AuthenticodeVerifier Component)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

__property bool CertKeyValid[int CertIndex] = { read=FCertKeyValid };

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertOCSPLocations Property (AuthenticodeVerifier Component)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

__property String CertOCSPLocations[int CertIndex] = { read=FCertOCSPLocations };

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPolicyIDs Property (AuthenticodeVerifier Component)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

__property String CertPolicyIDs[int CertIndex] = { read=FCertPolicyIDs };

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPublicKeyBytes Property (AuthenticodeVerifier Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray CertPublicKeyBytes[int CertIndex] = { read=FCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSelfSigned Property (AuthenticodeVerifier Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool CertSelfSigned[int CertIndex] = { read=FCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertSerialNumber Property (AuthenticodeVerifier Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray CertSerialNumber[int CertIndex] = { read=FCertSerialNumber };

Remarks

Returns the certificate's serial number.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSigAlgorithm Property (AuthenticodeVerifier Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String CertSigAlgorithm[int CertIndex] = { read=FCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubject Property (AuthenticodeVerifier Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String CertSubject[int CertIndex] = { read=FCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubjectKeyID Property (AuthenticodeVerifier Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray CertSubjectKeyID[int CertIndex] = { read=FCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSubjectRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String CertSubjectRDN[int CertIndex] = { read=FCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidFrom Property (AuthenticodeVerifier Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String CertValidFrom[int CertIndex] = { read=FCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidTo Property (AuthenticodeVerifier Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String CertValidTo[int CertIndex] = { read=FCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

ChainValidationDetails Property (AuthenticodeVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int ChainValidationDetails = { read=FChainValidationDetails };

Default Value

0

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only and not available at design time.

Data Type

Integer

ChainValidationResult Property (AuthenticodeVerifier Component)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Syntax

__property TsbxAuthenticodeVerifierChainValidationResults ChainValidationResult = { read=FChainValidationResult };

enum TsbxAuthenticodeVerifierChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

ClaimedSigningTime Property (AuthenticodeVerifier Component)

Returns a signature's claimed signing time.

Syntax

__property String ClaimedSigningTime = { read=FClaimedSigningTime };

Default Value

""

Remarks

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by the signature and may be forfeited or wrong. Use ValidatedSigningTime to obtain the signing time figure verified by a trusted timestamping authority. The time is in UTC.

This property is read-only and not available at design time.

Data Type

String

CRLCount Property (AuthenticodeVerifier Component)

The number of records in the CRL arrays.

Syntax

__property int CRLCount = { read=FCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CRLBytes
• CRLHandle
• CRLIssuer
• CRLIssuerRDN
• CRLLocation
• CRLNextUpdate
• CRLThisUpdate

The array indices start at 0 and end at CRLCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CRLBytes Property (AuthenticodeVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray CRLBytes[int CRLIndex] = { read=FCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CRLHandle[int CRLIndex] = { read=FCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Long64

CRLIssuer Property (AuthenticodeVerifier Component)

The common name of the CRL issuer (CA), typically a company name.

Syntax

__property String CRLIssuer[int CRLIndex] = { read=FCRLIssuer };

Default Value

""

Remarks

The common name of the CRL issuer (CA), typically a company name.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLIssuerRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Syntax

__property String CRLIssuerRDN[int CRLIndex] = { read=FCRLIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLLocation Property (AuthenticodeVerifier Component)

The URL that the CRL was downloaded from.

Syntax

__property String CRLLocation[int CRLIndex] = { read=FCRLLocation };

Default Value

""

Remarks

The URL that the CRL was downloaded from.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLNextUpdate Property (AuthenticodeVerifier Component)

The planned time and date of the next version of this CRL to be published.

Syntax

__property String CRLNextUpdate[int CRLIndex] = { read=FCRLNextUpdate };

Default Value

""

Remarks

The planned time and date of the next version of this CRL to be published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLThisUpdate Property (AuthenticodeVerifier Component)

The date and time at which this version of the CRL was published.

Syntax

__property String CRLThisUpdate[int CRLIndex] = { read=FCRLThisUpdate };

Default Value

""

Remarks

The date and time at which this version of the CRL was published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

FIPSMode Property (AuthenticodeVerifier Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

IgnoreChainValidationErrors Property (AuthenticodeVerifier Component)

Makes the component tolerant to chain validation errors.

Syntax

__property bool IgnoreChainValidationErrors = { read=FIgnoreChainValidationErrors, write=FSetIgnoreChainValidationErrors };

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (AuthenticodeVerifier Component)

Use this property to pass the input to component in byte array form.

Syntax

__property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes };

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (AuthenticodeVerifier Component)

A path to the signed executable.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

A path to the file containing the signed executable. The input can alternatively be provided via InputStream.

Data Type

String

KnownCertCount Property (AuthenticodeVerifier Component)

The number of records in the KnownCert arrays.

Syntax

__property int KnownCertCount = { read=FKnownCertCount, write=FSetKnownCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCertBytes
• KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray KnownCertBytes[int KnownCertIndex] = { read=FKnownCertBytes };

Remarks

Returns the raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCertHandle[int KnownCertIndex] = { read=FKnownCertHandle, write=FSetKnownCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (AuthenticodeVerifier Component)

The number of records in the KnownCRL arrays.

Syntax

__property int KnownCRLCount = { read=FKnownCRLCount, write=FSetKnownCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCRLBytes
• KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (AuthenticodeVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray KnownCRLBytes[int KnownCRLIndex] = { read=FKnownCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCRLHandle[int KnownCRLIndex] = { read=FKnownCRLHandle, write=FSetKnownCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (AuthenticodeVerifier Component)

The number of records in the KnownOCSP arrays.

Syntax

__property int KnownOCSPCount = { read=FKnownOCSPCount, write=FSetKnownOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownOCSPBytes
• KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (AuthenticodeVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray KnownOCSPBytes[int KnownOCSPIndex] = { read=FKnownOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownOCSPHandle[int KnownOCSPIndex] = { read=FKnownOCSPHandle, write=FSetKnownOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OCSPCount Property (AuthenticodeVerifier Component)

The number of records in the OCSP arrays.

Syntax

__property int OCSPCount = { read=FOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OCSPBytes
• OCSPHandle
• OCSPIssuer
• OCSPIssuerRDN
• OCSPLocation
• OCSPProducedAt

The array indices start at 0 and end at OCSPCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OCSPBytes Property (AuthenticodeVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray OCSPBytes[int OCSPIndex] = { read=FOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OCSPHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 OCSPHandle[int OCSPIndex] = { read=FOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Long64

OCSPIssuer Property (AuthenticodeVerifier Component)

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuer[int OCSPIndex] = { read=FOCSPIssuer };

Default Value

""

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPIssuerRDN Property (AuthenticodeVerifier Component)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuerRDN[int OCSPIndex] = { read=FOCSPIssuerRDN };

Default Value

""

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPLocation Property (AuthenticodeVerifier Component)

The location of the OCSP responder.

Syntax

__property String OCSPLocation[int OCSPIndex] = { read=FOCSPLocation };

Default Value

""

Remarks

The location of the OCSP responder.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPProducedAt Property (AuthenticodeVerifier Component)

Specifies the time when the response was produced, in UTC.

Syntax

__property String OCSPProducedAt[int OCSPIndex] = { read=FOCSPProducedAt };

Default Value

""

Remarks

Specifies the time when the response was produced, in UTC.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OfflineMode Property (AuthenticodeVerifier Component)

Switches the component to offline mode.

Syntax

__property bool OfflineMode = { read=FOfflineMode, write=FSetOfflineMode };

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

Profile Property (AuthenticodeVerifier Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

__property String Profile = { read=FProfile, write=FSetProfile };

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (AuthenticodeVerifier Component)

The IP address of the proxy server.

Syntax

__property String ProxyAddress = { read=FProxyAddress, write=FSetProxyAddress };

Default Value

""

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (AuthenticodeVerifier Component)

The authentication type used by the proxy server.

Syntax

__property TsbxAuthenticodeVerifierProxyAuthentications ProxyAuthentication = { read=FProxyAuthentication, write=FSetProxyAuthentication };

enum TsbxAuthenticodeVerifierProxyAuthentications {
  patNoAuthentication=0,
  patBasic=1,
  patDigest=2,
  patNTLM=3
};

Default Value

patNoAuthentication

Remarks

The authentication type used by the proxy server.

Data Type

Integer

ProxyPassword Property (AuthenticodeVerifier Component)

The password to authenticate to the proxy server.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (AuthenticodeVerifier Component)

The port on the proxy server to connect to.

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (AuthenticodeVerifier Component)

The type of the proxy server.

Syntax

__property TsbxAuthenticodeVerifierProxyProxyTypes ProxyProxyType = { read=FProxyProxyType, write=FSetProxyProxyType };

enum TsbxAuthenticodeVerifierProxyProxyTypes {
  cptNone=0,
  cptSocks4=1,
  cptSocks5=2,
  cptWebTunnel=3,
  cptHTTP=4
};

Default Value

cptNone

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

Data Type

Integer

ProxyRequestHeaders Property (AuthenticodeVerifier Component)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

__property String ProxyRequestHeaders = { read=FProxyRequestHeaders, write=FSetProxyRequestHeaders };

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (AuthenticodeVerifier Component)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

__property String ProxyResponseBody = { read=FProxyResponseBody, write=FSetProxyResponseBody };

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (AuthenticodeVerifier Component)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

__property String ProxyResponseHeaders = { read=FProxyResponseHeaders, write=FSetProxyResponseHeaders };

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (AuthenticodeVerifier Component)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

__property bool ProxyUseIPv6 = { read=FProxyUseIPv6, write=FSetProxyUseIPv6 };

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (AuthenticodeVerifier Component)

Enables or disables proxy-driven connection.

Syntax

__property bool ProxyUseProxy = { read=FProxyUseProxy, write=FSetProxyUseProxy };

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (AuthenticodeVerifier Component)

Specifies the username credential for proxy authentication.

Syntax

__property String ProxyUsername = { read=FProxyUsername, write=FSetProxyUsername };

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RevocationCheck Property (AuthenticodeVerifier Component)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

__property TsbxAuthenticodeVerifierRevocationChecks RevocationCheck = { read=FRevocationCheck, write=FSetRevocationCheck };

enum TsbxAuthenticodeVerifierRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SigChainValidationDetails Property (AuthenticodeVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int SigChainValidationDetails = { read=FSigChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only and not available at design time.

Data Type

Integer

SigChainValidationResult Property (AuthenticodeVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxAuthenticodeVerifierSigChainValidationResults SigChainValidationResult = { read=FSigChainValidationResult };

enum TsbxAuthenticodeVerifierSigChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

SigClaimedSigningTime Property (AuthenticodeVerifier Component)

Returns the signature's claimed signing time.

Syntax

__property String SigClaimedSigningTime = { read=FSigClaimedSigningTime };

Default Value

""

Remarks

Returns the signature's claimed signing time.

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by a trusted timestamp and may be forfeited or wrong. Use SigValidatedSigningTime to obtain the signing time figure verified by a trusted timestamping authority. The time is in UTC.

This property is read-only and not available at design time.

Data Type

String

SigDescription Property (AuthenticodeVerifier Component)

Returns a human-readable signature description.

Syntax

__property String SigDescription = { read=FSigDescription };

Default Value

""

Remarks

Returns a human-readable signature description.

This property is read-only and not available at design time.

Data Type

String

SigErrorCode Property (AuthenticodeVerifier Component)

Returns the error code returned by the signature validation routine.

Syntax

__property int SigErrorCode = { read=FSigErrorCode };

Default Value

0

Remarks

Returns the error code returned by the signature validation routine.

This property is read-only and not available at design time.

Data Type

Integer

SigErrorMessage Property (AuthenticodeVerifier Component)

Returns the error message returned by the signature validation routine.

Syntax

__property String SigErrorMessage = { read=FSigErrorMessage };

Default Value

""

Remarks

Returns the error message returned by the signature validation routine.

This property is read-only and not available at design time.

Data Type

String

SigFileHashAlgorithm Property (AuthenticodeVerifier Component)

Returns the algorithm that was used to hash the executable.

Syntax

__property String SigFileHashAlgorithm = { read=FSigFileHashAlgorithm };

Default Value

""

Remarks

Returns the algorithm that was used to hash the executable.

This property is read-only and not available at design time.

Data Type

String

SigHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SigHandle = { read=FSigHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

SigHashAlgorithm Property (AuthenticodeVerifier Component)

Returns the hash algorithm used when generating the signature.

Syntax

__property String SigHashAlgorithm = { read=FSigHashAlgorithm };

Default Value

""

Remarks

Returns the hash algorithm used when generating the signature.

This property is read-only and not available at design time.

Data Type

String

SigSignatureBytes Property (AuthenticodeVerifier Component)

Returns the binary representation of the inner PKCS7 signature.

Syntax

__property DynamicArray SigSignatureBytes = { read=FSigSignatureBytes };

Remarks

Returns the binary representation of the inner PKCS7 signature.

This property is read-only and not available at design time.

Data Type

Byte Array

SigSignatureValidationResult Property (AuthenticodeVerifier Component)

The outcome of the cryptographic signature validation.

Syntax

__property TsbxAuthenticodeVerifierSigSignatureValidationResults SigSignatureValidationResult = { read=FSigSignatureValidationResult };

enum TsbxAuthenticodeVerifierSigSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

This property is read-only and not available at design time.

Data Type

Integer

SigStatementType Property (AuthenticodeVerifier Component)

Returns the signature statement type.

Syntax

__property TsbxAuthenticodeVerifierSigStatementTypes SigStatementType = { read=FSigStatementType };

enum TsbxAuthenticodeVerifierSigStatementTypes {
  acsUnknown=0,
  acsIndividual=1,
  acsCommercial=2
};

Default Value

acsUnknown

Remarks

Returns the signature statement type.

Available options:

This property is read-only and not available at design time.

Data Type

Integer

SigURL Property (AuthenticodeVerifier Component)

Returns the URL included in the signature by the signer.

Syntax

__property String SigURL = { read=FSigURL };

Default Value

""

Remarks

Returns the URL included in the signature by the signer.

This property is read-only and not available at design time.

Data Type

String

SigValidatedSigningTime Property (AuthenticodeVerifier Component)

Contains the certified signing time.

Syntax

__property String SigValidatedSigningTime = { read=FSigValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SigClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

This property is read-only and not available at design time.

Data Type

String

SigValidationLog Property (AuthenticodeVerifier Component)

Contains the signing certificate's chain validation log.

Syntax

__property String SigValidationLog = { read=FSigValidationLog };

Default Value

""

Remarks

Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only and not available at design time.

Data Type

String

SignatureCount Property (AuthenticodeVerifier Component)

The number of records in the Signature arrays.

Syntax

__property int SignatureCount = { read=FSignatureCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignatureChainValidationDetails
• SignatureChainValidationResult
• SignatureClaimedSigningTime
• SignatureDescription
• SignatureErrorCode
• SignatureErrorMessage
• SignatureFileHashAlgorithm
• SignatureHandle
• SignatureHashAlgorithm
• SignatureSignatureBytes
• SignatureSignatureValidationResult
• SignatureStatementType
• SignatureURL
• SignatureValidatedSigningTime
• SignatureValidationLog

The array indices start at 0 and end at SignatureCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationDetails Property (AuthenticodeVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int SignatureChainValidationDetails[int SignatureIndex] = { read=FSignatureChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationResult Property (AuthenticodeVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxAuthenticodeVerifierSignatureChainValidationResults SignatureChainValidationResult[int SignatureIndex] = { read=FSignatureChainValidationResult };

enum TsbxAuthenticodeVerifierSignatureChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureClaimedSigningTime Property (AuthenticodeVerifier Component)

Returns the signature's claimed signing time.

Syntax

__property String SignatureClaimedSigningTime[int SignatureIndex] = { read=FSignatureClaimedSigningTime };

Default Value

""

Remarks

Returns the signature's claimed signing time.

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by a trusted timestamp and may be forfeited or wrong. Use SignatureValidatedSigningTime to obtain the signing time figure verified by a trusted timestamping authority. The time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureDescription Property (AuthenticodeVerifier Component)

Returns a human-readable signature description.

Syntax

__property String SignatureDescription[int SignatureIndex] = { read=FSignatureDescription };

Default Value

""

Remarks

Returns a human-readable signature description.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureErrorCode Property (AuthenticodeVerifier Component)

Returns the error code returned by the signature validation routine.

Syntax

__property int SignatureErrorCode[int SignatureIndex] = { read=FSignatureErrorCode };

Default Value

0

Remarks

Returns the error code returned by the signature validation routine.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureErrorMessage Property (AuthenticodeVerifier Component)

Returns the error message returned by the signature validation routine.

Syntax

__property String SignatureErrorMessage[int SignatureIndex] = { read=FSignatureErrorMessage };

Default Value

""

Remarks

Returns the error message returned by the signature validation routine.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureFileHashAlgorithm Property (AuthenticodeVerifier Component)

Returns the algorithm that was used to hash the executable.

Syntax

__property String SignatureFileHashAlgorithm[int SignatureIndex] = { read=FSignatureFileHashAlgorithm };

Default Value

""

Remarks

Returns the algorithm that was used to hash the executable.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SignatureHandle[int SignatureIndex] = { read=FSignatureHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Long64

SignatureHashAlgorithm Property (AuthenticodeVerifier Component)

Returns the hash algorithm used when generating the signature.

Syntax

__property String SignatureHashAlgorithm[int SignatureIndex] = { read=FSignatureHashAlgorithm };

Default Value

""

Remarks

Returns the hash algorithm used when generating the signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSignatureBytes Property (AuthenticodeVerifier Component)

Returns the binary representation of the inner PKCS7 signature.

Syntax

__property DynamicArray SignatureSignatureBytes[int SignatureIndex] = { read=FSignatureSignatureBytes };

Remarks

Returns the binary representation of the inner PKCS7 signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureValidationResult Property (AuthenticodeVerifier Component)

The outcome of the cryptographic signature validation.

Syntax

__property TsbxAuthenticodeVerifierSignatureSignatureValidationResults SignatureSignatureValidationResult[int SignatureIndex] = { read=FSignatureSignatureValidationResult };

enum TsbxAuthenticodeVerifierSignatureSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureStatementType Property (AuthenticodeVerifier Component)

Returns the signature statement type.

Syntax

__property TsbxAuthenticodeVerifierSignatureStatementTypes SignatureStatementType[int SignatureIndex] = { read=FSignatureStatementType };

enum TsbxAuthenticodeVerifierSignatureStatementTypes {
  acsUnknown=0,
  acsIndividual=1,
  acsCommercial=2
};

Default Value

acsUnknown

Remarks

Returns the signature statement type.

Available options:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureURL Property (AuthenticodeVerifier Component)

Returns the URL included in the signature by the signer.

Syntax

__property String SignatureURL[int SignatureIndex] = { read=FSignatureURL };

Default Value

""

Remarks

Returns the URL included in the signature by the signer.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidatedSigningTime Property (AuthenticodeVerifier Component)

Contains the certified signing time.

Syntax

__property String SignatureValidatedSigningTime[int SignatureIndex] = { read=FSignatureValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SignatureClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationLog Property (AuthenticodeVerifier Component)

Contains the signing certificate's chain validation log.

Syntax

__property String SignatureValidationLog[int SignatureIndex] = { read=FSignatureValidationLog };

Default Value

""

Remarks

Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationResult Property (AuthenticodeVerifier Component)

The signature validation result.

Syntax

__property TsbxAuthenticodeVerifierSignatureValidationResults SignatureValidationResult = { read=FSignatureValidationResult };

enum TsbxAuthenticodeVerifierSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

Use this property to check the result of the most recent signature validation.

This property is read-only and not available at design time.

Data Type

Integer

Signed Property (AuthenticodeVerifier Component)

Indicates whether the executable is signed.

Syntax

__property bool Signed = { read=FSigned };

Default Value

false

Remarks

Check this property after calling Verify to find out whether or not the provided executable is signed.

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray SigningCertBytes = { read=FSigningCertBytes };

Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertCA Property (AuthenticodeVerifier Component)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Syntax

__property bool SigningCertCA = { read=FSigningCertCA };

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertCAKeyID Property (AuthenticodeVerifier Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray SigningCertCAKeyID = { read=FSigningCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertCRLDistributionPoints Property (AuthenticodeVerifier Component)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

__property String SigningCertCRLDistributionPoints = { read=FSigningCertCRLDistributionPoints };

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is read-only and not available at design time.

Data Type

String

SigningCertCurve Property (AuthenticodeVerifier Component)

Specifies the elliptic curve of the EC public key.

Syntax

__property String SigningCertCurve = { read=FSigningCertCurve };

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

This property is read-only and not available at design time.

Data Type

String

SigningCertFingerprint Property (AuthenticodeVerifier Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray SigningCertFingerprint = { read=FSigningCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertFriendlyName Property (AuthenticodeVerifier Component)

Contains an associated alias (friendly name) of the certificate.

Syntax

__property String SigningCertFriendlyName = { read=FSigningCertFriendlyName };

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

SigningCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SigningCertHandle = { read=FSigningCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

SigningCertHashAlgorithm Property (AuthenticodeVerifier Component)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

__property String SigningCertHashAlgorithm = { read=FSigningCertHashAlgorithm };

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

This property is read-only and not available at design time.

Data Type

String

SigningCertIssuer Property (AuthenticodeVerifier Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String SigningCertIssuer = { read=FSigningCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

SigningCertIssuerRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String SigningCertIssuerRDN = { read=FSigningCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

SigningCertKeyAlgorithm Property (AuthenticodeVerifier Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String SigningCertKeyAlgorithm = { read=FSigningCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

This property is read-only and not available at design time.

Data Type

String

SigningCertKeyBits Property (AuthenticodeVerifier Component)

Returns the length of the public key.

Syntax

__property int SigningCertKeyBits = { read=FSigningCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

SigningCertKeyFingerprint Property (AuthenticodeVerifier Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray SigningCertKeyFingerprint = { read=FSigningCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertKeyUsage Property (AuthenticodeVerifier Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int SigningCertKeyUsage = { read=FSigningCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

This property is read-only and not available at design time.

Data Type

Integer

SigningCertKeyValid Property (AuthenticodeVerifier Component)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

__property bool SigningCertKeyValid = { read=FSigningCertKeyValid };

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertOCSPLocations Property (AuthenticodeVerifier Component)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

__property String SigningCertOCSPLocations = { read=FSigningCertOCSPLocations };

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is read-only and not available at design time.

Data Type

String

SigningCertPolicyIDs Property (AuthenticodeVerifier Component)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

__property String SigningCertPolicyIDs = { read=FSigningCertPolicyIDs };

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is read-only and not available at design time.

Data Type

String

SigningCertPublicKeyBytes Property (AuthenticodeVerifier Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray SigningCertPublicKeyBytes = { read=FSigningCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSelfSigned Property (AuthenticodeVerifier Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool SigningCertSelfSigned = { read=FSigningCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

SigningCertSerialNumber Property (AuthenticodeVerifier Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray SigningCertSerialNumber = { read=FSigningCertSerialNumber };

Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSigAlgorithm Property (AuthenticodeVerifier Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String SigningCertSigAlgorithm = { read=FSigningCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

SigningCertSubject Property (AuthenticodeVerifier Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String SigningCertSubject = { read=FSigningCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

SigningCertSubjectKeyID Property (AuthenticodeVerifier Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray SigningCertSubjectKeyID = { read=FSigningCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertSubjectRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String SigningCertSubjectRDN = { read=FSigningCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

SigningCertValidFrom Property (AuthenticodeVerifier Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String SigningCertValidFrom = { read=FSigningCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is read-only and not available at design time.

Data Type

String

SigningCertValidTo Property (AuthenticodeVerifier Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String SigningCertValidTo = { read=FSigningCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

This property is read-only and not available at design time.

Data Type

String

SocketDNSMode Property (AuthenticodeVerifier Component)

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Syntax

__property TsbxAuthenticodeVerifierSocketDNSModes SocketDNSMode = { read=FSocketDNSMode, write=FSetSocketDNSMode };

enum TsbxAuthenticodeVerifierSocketDNSModes {
  dmAuto=0,
  dmPlatform=1,
  dmOwn=2,
  dmOwnSecure=3
};

Default Value

dmAuto

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Data Type

Integer

SocketDNSPort Property (AuthenticodeVerifier Component)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

__property int SocketDNSPort = { read=FSocketDNSPort, write=FSetSocketDNSPort };

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (AuthenticodeVerifier Component)

The timeout (in milliseconds) for each DNS query.

Syntax

__property int SocketDNSQueryTimeout = { read=FSocketDNSQueryTimeout, write=FSetSocketDNSQueryTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (AuthenticodeVerifier Component)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

__property String SocketDNSServers = { read=FSocketDNSServers, write=FSetSocketDNSServers };

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (AuthenticodeVerifier Component)

The timeout (in milliseconds) for the whole resolution process.

Syntax

__property int SocketDNSTotalTimeout = { read=FSocketDNSTotalTimeout, write=FSetSocketDNSTotalTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (AuthenticodeVerifier Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (AuthenticodeVerifier Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (AuthenticodeVerifier Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (AuthenticodeVerifier Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (AuthenticodeVerifier Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (AuthenticodeVerifier Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

SpecifiedChecksum Property (AuthenticodeVerifier Component)

Returns the checksum of the executable.

Syntax

__property int SpecifiedChecksum = { read=FSpecifiedChecksum };

Default Value

0

Remarks

Use this property to get the checksum of the executable as included by the signer.

This property is read-only and not available at design time.

Data Type

Integer

TimestampAccuracy Property (AuthenticodeVerifier Component)

This property indicates the accuracy of the included time mark, in microseconds.

Syntax

__property __int64 TimestampAccuracy = { read=FTimestampAccuracy };

Default Value

0

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

This property is read-only and not available at design time.

Data Type

Long64

TimestampBytes Property (AuthenticodeVerifier Component)

Returns the raw timestamp data in DER format.

Syntax

__property DynamicArray TimestampBytes = { read=FTimestampBytes };

Remarks

Returns the raw timestamp data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampCertificateIndex Property (AuthenticodeVerifier Component)

Returns the index of the TSA certificate in the Certificates collection.

Syntax

__property int TimestampCertificateIndex = { read=FTimestampCertificateIndex };

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationDetails Property (AuthenticodeVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int TimestampChainValidationDetails = { read=FTimestampChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationResult Property (AuthenticodeVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxAuthenticodeVerifierTimestampChainValidationResults TimestampChainValidationResult = { read=FTimestampChainValidationResult };

enum TsbxAuthenticodeVerifierTimestampChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

TimestampHashAlgorithm Property (AuthenticodeVerifier Component)

Returns the timestamp's hash algorithm.

Syntax

__property String TimestampHashAlgorithm = { read=FTimestampHashAlgorithm };

Default Value

""

Remarks

Returns the timestamp's hash algorithm.

This property is read-only and not available at design time.

Data Type

String

TimestampSerialNumber Property (AuthenticodeVerifier Component)

Returns the timestamp's serial number.

Syntax

__property DynamicArray TimestampSerialNumber = { read=FTimestampSerialNumber };

Remarks

Returns the timestamp's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampSignatureIndex Property (AuthenticodeVerifier Component)

Returns the index of the owner signature, if applicable.

Syntax

__property int TimestampSignatureIndex = { read=FTimestampSignatureIndex };

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTime Property (AuthenticodeVerifier Component)

The time point incorporated into the timestamp.

Syntax

__property String TimestampTime = { read=FTimestampTime };

Default Value

""

Remarks

The time point incorporated into the timestamp.

This property is read-only and not available at design time.

Data Type

String

TimestampTimestampType Property (AuthenticodeVerifier Component)

Returns the type of the timestamp.

Syntax

__property int TimestampTimestampType = { read=FTimestampTimestampType };

Default Value

0

Remarks

Returns the type of the timestamp.

Available options:

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

This property is read-only and not available at design time.

Data Type

Integer

TimestampTSAName Property (AuthenticodeVerifier Component)

This value uniquely identifies the Timestamp Authority (TSA).

Syntax

__property String TimestampTSAName = { read=FTimestampTSAName };

Default Value

""

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationLog Property (AuthenticodeVerifier Component)

Contains the TSA certificate chain validation log.

Syntax

__property String TimestampValidationLog = { read=FTimestampValidationLog };

Default Value

""

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationResult Property (AuthenticodeVerifier Component)

Contains the timestamp validation outcome.

Syntax

__property TsbxAuthenticodeVerifierTimestampValidationResults TimestampValidationResult = { read=FTimestampValidationResult };

enum TsbxAuthenticodeVerifierTimestampValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

This property is read-only and not available at design time.

Data Type

Integer

Timestamped Property (AuthenticodeVerifier Component)

Indicates whether or not the signature is timestamped.

Syntax

__property bool Timestamped = { read=FTimestamped };

Default Value

false

Remarks

This property returns True if the signature is timestamped, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

TLSClientCertCount Property (AuthenticodeVerifier Component)

The number of records in the TLSClientCert arrays.

Syntax

__property int TLSClientCertCount = { read=FTLSClientCertCount, write=FSetTLSClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSClientCertBytes
• TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSClientCertBytes[int TLSClientCertIndex] = { read=FTLSClientCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSClientCertHandle[int TLSClientCertIndex] = { read=FTLSClientCertHandle, write=FSetTLSClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (AuthenticodeVerifier Component)

The number of records in the TLSServerCert arrays.

Syntax

__property int TLSServerCertCount = { read=FTLSServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSServerCertBytes
• TLSServerCertHandle

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSServerCertBytes[int TLSServerCertIndex] = { read=FTLSServerCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSServerCertHandle[int TLSServerCertIndex] = { read=FTLSServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSAutoValidateCertificates Property (AuthenticodeVerifier Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (AuthenticodeVerifier Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxAuthenticodeVerifierTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };

enum TsbxAuthenticodeVerifierTLSBaseConfigurations {
  stpcDefault=0,
  stpcCompatible=1,
  stpcComprehensiveInsecure=2,
  stpcHighlySecure=3
};

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (AuthenticodeVerifier Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (AuthenticodeVerifier Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (AuthenticodeVerifier Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (AuthenticodeVerifier Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (AuthenticodeVerifier Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (AuthenticodeVerifier Component)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (AuthenticodeVerifier Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (AuthenticodeVerifier Component)

Selects the renegotiation attack prevention mechanism.

Syntax

__property TsbxAuthenticodeVerifierTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };

enum TsbxAuthenticodeVerifierTLSRenegotiationAttackPreventionModes {
  crapmCompatible=0,
  crapmStrict=1,
  crapmAuto=2
};

Default Value

crapmCompatible

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (AuthenticodeVerifier Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxAuthenticodeVerifierTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };

enum TsbxAuthenticodeVerifierTLSRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (AuthenticodeVerifier Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (AuthenticodeVerifier Component)

Specifies the TLS mode to use.

Syntax

__property TsbxAuthenticodeVerifierTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };

enum TsbxAuthenticodeVerifierTLSTLSModes {
  smDefault=0,
  smNoTLS=1,
  smExplicitTLS=2,
  smImplicitTLS=3,
  smMixedTLS=4
};

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (AuthenticodeVerifier Component)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (AuthenticodeVerifier Component)

Enables or disables the TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (AuthenticodeVerifier Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

TrustedCertCount Property (AuthenticodeVerifier Component)

The number of records in the TrustedCert arrays.

Syntax

__property int TrustedCertCount = { read=FTrustedCertCount, write=FSetTrustedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TrustedCertBytes
• TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TrustedCertBytes[int TrustedCertIndex] = { read=FTrustedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TrustedCertHandle[int TrustedCertIndex] = { read=FTrustedCertHandle, write=FSetTrustedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

TSACertBytes Property (AuthenticodeVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TSACertBytes = { read=FTSACertBytes };

Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertCA Property (AuthenticodeVerifier Component)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Syntax

__property bool TSACertCA = { read=FTSACertCA };

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

This property is read-only and not available at design time.

Data Type

Boolean

TSACertCAKeyID Property (AuthenticodeVerifier Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray TSACertCAKeyID = { read=FTSACertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertCRLDistributionPoints Property (AuthenticodeVerifier Component)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

__property String TSACertCRLDistributionPoints = { read=FTSACertCRLDistributionPoints };

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

This property is read-only and not available at design time.

Data Type

String

TSACertCurve Property (AuthenticodeVerifier Component)

Specifies the elliptic curve of the EC public key.

Syntax

__property String TSACertCurve = { read=FTSACertCurve };

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

This property is read-only and not available at design time.

Data Type

String

TSACertFingerprint Property (AuthenticodeVerifier Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray TSACertFingerprint = { read=FTSACertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertFriendlyName Property (AuthenticodeVerifier Component)

Contains an associated alias (friendly name) of the certificate.

Syntax

__property String TSACertFriendlyName = { read=FTSACertFriendlyName };

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

This property is read-only and not available at design time.

Data Type

String

TSACertHandle Property (AuthenticodeVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TSACertHandle = { read=FTSACertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

TSACertHashAlgorithm Property (AuthenticodeVerifier Component)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

__property String TSACertHashAlgorithm = { read=FTSACertHashAlgorithm };

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

This property is read-only and not available at design time.

Data Type

String

TSACertIssuer Property (AuthenticodeVerifier Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String TSACertIssuer = { read=FTSACertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

TSACertIssuerRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String TSACertIssuerRDN = { read=FTSACertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

TSACertKeyAlgorithm Property (AuthenticodeVerifier Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String TSACertKeyAlgorithm = { read=FTSACertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

This property is read-only and not available at design time.

Data Type

String

TSACertKeyBits Property (AuthenticodeVerifier Component)

Returns the length of the public key.

Syntax

__property int TSACertKeyBits = { read=FTSACertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

TSACertKeyFingerprint Property (AuthenticodeVerifier Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray TSACertKeyFingerprint = { read=FTSACertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertKeyUsage Property (AuthenticodeVerifier Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int TSACertKeyUsage = { read=FTSACertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

This property is read-only and not available at design time.

Data Type

Integer

TSACertKeyValid Property (AuthenticodeVerifier Component)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

__property bool TSACertKeyValid = { read=FTSACertKeyValid };

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

This property is read-only and not available at design time.

Data Type

Boolean

TSACertOCSPLocations Property (AuthenticodeVerifier Component)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

__property String TSACertOCSPLocations = { read=FTSACertOCSPLocations };

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

This property is read-only and not available at design time.

Data Type

String

TSACertPolicyIDs Property (AuthenticodeVerifier Component)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

__property String TSACertPolicyIDs = { read=FTSACertPolicyIDs };

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

This property is read-only and not available at design time.

Data Type

String

TSACertPublicKeyBytes Property (AuthenticodeVerifier Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray TSACertPublicKeyBytes = { read=FTSACertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertSelfSigned Property (AuthenticodeVerifier Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool TSACertSelfSigned = { read=FTSACertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

This property is read-only and not available at design time.

Data Type

Boolean

TSACertSerialNumber Property (AuthenticodeVerifier Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray TSACertSerialNumber = { read=FTSACertSerialNumber };

Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertSigAlgorithm Property (AuthenticodeVerifier Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String TSACertSigAlgorithm = { read=FTSACertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

This property is read-only and not available at design time.

Data Type

String

TSACertSubject Property (AuthenticodeVerifier Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String TSACertSubject = { read=FTSACertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

TSACertSubjectKeyID Property (AuthenticodeVerifier Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray TSACertSubjectKeyID = { read=FTSACertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

This property is read-only and not available at design time.

Data Type

Byte Array

TSACertSubjectRDN Property (AuthenticodeVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String TSACertSubjectRDN = { read=FTSACertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

TSACertValidFrom Property (AuthenticodeVerifier Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String TSACertValidFrom = { read=FTSACertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

This property is read-only and not available at design time.

Data Type

String

TSACertValidTo Property (AuthenticodeVerifier Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String TSACertValidTo = { read=FTSACertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

This property is read-only and not available at design time.

Data Type

String

ValidatedSigningTime Property (AuthenticodeVerifier Component)

Contains the certified signing time.

Syntax

__property String ValidatedSigningTime = { read=FValidatedSigningTime };

Default Value

""

Remarks

Use this property to obtain the signing time as certified by an external timestamp. The time is in UTC.

This property is read-only and not available at design time.

Data Type

String

ValidationLog Property (AuthenticodeVerifier Component)

Contains the complete log of the certificate validation routine.

Syntax

__property String ValidationLog = { read=FValidationLog };

Default Value

""

Remarks

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only and not available at design time.

Data Type

String

ValidationMoment Property (AuthenticodeVerifier Component)

The time point at which signature validity is to be established.

Syntax

__property String ValidationMoment = { read=FValidationMoment, write=FSetValidationMoment };

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

Config Method (AuthenticodeVerifier Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (AuthenticodeVerifier Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Verify Method (AuthenticodeVerifier Component)

Verifies a digitally signed executable.

Syntax

void __fastcall Verify();

Remarks

Use this method to verify all signatures in the executable provided via InputFile or via InputStream.

ChainElementDownload Event (AuthenticodeVerifier Component)

Fires when there is a need to download a chain element from an online source.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
  String Location;
  int Action;
} TsbxAuthenticodeVerifierChainElementDownloadEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierChainElementDownloadEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierChainElementDownloadEventParams *e);
__property TsbxAuthenticodeVerifierChainElementDownloadEvent OnChainElementDownload = { read=FOnChainElementDownload, write=FOnChainElementDownload };

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (AuthenticodeVerifier Component)

Fires when an element required to validate the chain was not located.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
} TsbxAuthenticodeVerifierChainElementNeededEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierChainElementNeededEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierChainElementNeededEventParams *e);
__property TsbxAuthenticodeVerifierChainElementNeededEvent OnChainElementNeeded = { read=FOnChainElementNeeded, write=FOnChainElementNeeded };

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainValidated Event (AuthenticodeVerifier Component)

Reports the completion of a certificate chain validation.

Syntax

typedef struct {
  String SubjectRDN;
  int ValidationResult;
  int ValidationDetails;
} TsbxAuthenticodeVerifierChainValidatedEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierChainValidatedEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierChainValidatedEventParams *e);
__property TsbxAuthenticodeVerifierChainValidatedEvent OnChainValidated = { read=FOnChainValidated, write=FOnChainValidated };

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

ChainValidationProgress Event (AuthenticodeVerifier Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

typedef struct {
  String EventKind;
  String CertRDN;
  String CACertRDN;
  int Action;
} TsbxAuthenticodeVerifierChainValidationProgressEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierChainValidationProgressEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierChainValidationProgressEventParams *e);
__property TsbxAuthenticodeVerifierChainValidationProgressEvent OnChainValidationProgress = { read=FOnChainValidationProgress, write=FOnChainValidationProgress };

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

Error Event (AuthenticodeVerifier Component)

Information about errors during ASiC signature verification.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxAuthenticodeVerifierErrorEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierErrorEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierErrorEventParams *e);
__property TsbxAuthenticodeVerifierErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The event is fired in case of exceptional conditions during ASiC signature verification.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (AuthenticodeVerifier Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxAuthenticodeVerifierNotificationEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierNotificationEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierNotificationEventParams *e);
__property TsbxAuthenticodeVerifierNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

SignatureFound Event (AuthenticodeVerifier Component)

Signifies the start of signature validation.

Syntax

typedef struct {
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateSignature;
  bool ValidateChain;
} TsbxAuthenticodeVerifierSignatureFoundEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierSignatureFoundEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierSignatureFoundEventParams *e);
__property TsbxAuthenticodeVerifierSignatureFoundEvent OnSignatureFound = { read=FOnSignatureFound, write=FOnSignatureFound };

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (AuthenticodeVerifier Component)

Marks the completion of the signature validation routine.

Syntax

typedef struct {
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  int ValidationResult;
} TsbxAuthenticodeVerifierSignatureValidatedEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierSignatureValidatedEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierSignatureValidatedEventParams *e);
__property TsbxAuthenticodeVerifierSignatureValidatedEvent OnSignatureValidated = { read=FOnSignatureValidated, write=FOnSignatureValidated };

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (AuthenticodeVerifier Component)

Signifies the start of a timestamp validation routine.

Syntax

typedef struct {
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateTimestamp;
  bool ValidateChain;
} TsbxAuthenticodeVerifierTimestampFoundEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTimestampFoundEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTimestampFoundEventParams *e);
__property TsbxAuthenticodeVerifierTimestampFoundEvent OnTimestampFound = { read=FOnTimestampFound, write=FOnTimestampFound };

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (AuthenticodeVerifier Component)

Reports the completion of the timestamp validation routine.

Syntax

typedef struct {
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  String Time;
  int ValidationResult;
  int ChainValidationResult;
  int ChainValidationDetails;
} TsbxAuthenticodeVerifierTimestampValidatedEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTimestampValidatedEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTimestampValidatedEventParams *e);
__property TsbxAuthenticodeVerifierTimestampValidatedEvent OnTimestampValidated = { read=FOnTimestampValidated, write=FOnTimestampValidated };

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (AuthenticodeVerifier Component)

Fires when a remote TLS party requests a client certificate.

Syntax

typedef struct {
  String Host;
  String CANames;
} TsbxAuthenticodeVerifierTLSCertNeededEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTLSCertNeededEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTLSCertNeededEventParams *e);
__property TsbxAuthenticodeVerifierTLSCertNeededEvent OnTLSCertNeeded = { read=FOnTLSCertNeeded, write=FOnTLSCertNeeded };

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (AuthenticodeVerifier Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

typedef struct {
  String ServerHost;
  String ServerIP;
  bool Accept;
} TsbxAuthenticodeVerifierTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTLSCertValidateEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTLSCertValidateEventParams *e);
__property TsbxAuthenticodeVerifierTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (AuthenticodeVerifier Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

typedef struct {
  String Host;
  String Version;
  String Ciphersuite;
  DynamicArray ConnectionId;
  bool Abort;
} TsbxAuthenticodeVerifierTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTLSEstablishedEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTLSEstablishedEventParams *e);
__property TsbxAuthenticodeVerifierTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

The component uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (AuthenticodeVerifier Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

typedef struct {
  String Host;
  bool Abort;
} TsbxAuthenticodeVerifierTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTLSHandshakeEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTLSHandshakeEventParams *e);
__property TsbxAuthenticodeVerifierTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (AuthenticodeVerifier Component)

Reports the graceful closure of a TLS connection.

Syntax

typedef struct {
  String Host;
} TsbxAuthenticodeVerifierTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxAuthenticodeVerifierTLSShutdownEvent)(System::TObject* Sender, TsbxAuthenticodeVerifierTLSShutdownEventParams *e);
__property TsbxAuthenticodeVerifierTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (AuthenticodeVerifier Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

AuthenticodeVerifier Config Settings

Base Config Settings

Trappable Errors (AuthenticodeVerifier Component)

AuthenticodeSigner Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)