OAuthClient Component

Properties   Methods   Events   Config Settings   Errors  

The OAuthClient component implements interaction between the client, the resource owner (end-user), and the authorization server via OAuth 2.0 protocol.

Syntax

TsbxOAuthClient

Remarks

OAuthClient implements interaction between the client (an application that needs access to a protected resource), the resource owner (end-user), and the authorization server via OAuth 2.0 (RFC 6749) protocol.

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AccessTokenContains the access token.
AuthURLSpecifies the URL of the authorization server.
AutoRefreshSpecifies whether access token should be automatically refreshed.
BlockedCertCountThe number of records in the BlockedCert arrays.
BlockedCertBytesReturns raw certificate data in DER format.
BlockedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ClientCertCountThe number of records in the ClientCert arrays.
ClientCertBytesReturns raw certificate data in DER format.
ClientCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ClientIDClient ID of the application which needs access to the protected resource.
ClientSecretClient secret of the application which needs access to the protected resource.
ConnInfoAEADCipherIndicates whether the encryption algorithm used is an AEAD cipher.
ConnInfoChainValidationDetailsThe details of a certificate chain validation outcome.
ConnInfoChainValidationResultThe outcome of a certificate chain validation routine.
ConnInfoCiphersuiteThe cipher suite employed by this connection.
ConnInfoClientAuthenticatedSpecifies whether client authentication was performed during this connection.
ConnInfoClientAuthRequestedSpecifies whether client authentication was requested during this connection.
ConnInfoConnectionEstablishedIndicates whether the connection has been established fully.
ConnInfoConnectionIDThe unique identifier assigned to this connection.
ConnInfoDigestAlgorithmThe digest algorithm used in a TLS-enabled connection.
ConnInfoEncryptionAlgorithmThe symmetric encryption algorithm used in a TLS-enabled connection.
ConnInfoExportableIndicates whether a TLS connection uses a reduced-strength exportable cipher.
ConnInfoKeyExchangeAlgorithmThe key exchange algorithm used in a TLS-enabled connection.
ConnInfoKeyExchangeKeyBitsThe length of the key exchange key of a TLS-enabled connection.
ConnInfoNamedECCurveThe elliptic curve used in this connection.
ConnInfoPFSCipherIndicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
ConnInfoPreSharedIdentityHintA hint professed by the server to help the client select the PSK identity to use.
ConnInfoPublicKeyBitsThe length of the public key.
ConnInfoResumedSessionIndicates whether a TLS-enabled connection was spawned from another TLS connection.
ConnInfoSecureConnectionIndicates whether TLS or SSL is enabled for this connection.
ConnInfoServerAuthenticatedIndicates whether server authentication was performed during a TLS-enabled connection.
ConnInfoSignatureAlgorithmThe signature algorithm used in a TLS handshake.
ConnInfoSymmetricBlockSizeThe block size of the symmetric algorithm used.
ConnInfoSymmetricKeyBitsThe key length of the symmetric algorithm used.
ConnInfoTotalBytesReceivedThe total number of bytes received over this connection.
ConnInfoTotalBytesSentThe total number of bytes sent over this connection.
ConnInfoValidationLogContains the server certificate's chain validation log.
ConnInfoVersionIndicates the version of SSL/TLS protocol negotiated during this connection.
CustomParamCountThe number of records in the CustomParams arrays.
CustomParamsCategorySpecifies the string category of the contained value.
CustomParamsFormatSpecifies the format (encoding) of the value contained in the Value property.
CustomParamsNameThe name element in a (name, value) pair.
CustomParamsValueThe value element in a (name, value) pair.
ExpiresAtThe expiration time of access token.
ExpiresInReturns access token lifetime in seconds.
ExternalCryptoAsyncDocumentIDSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
ExternalCryptoCustomParamsCustom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoDataAdditional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculationSpecifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithmSpecifies the request's signature hash algorithm.
ExternalCryptoKeyIDThe ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecretThe pre-shared key used for DC request authentication.
ExternalCryptoMethodSpecifies the asynchronous signing method.
ExternalCryptoModeSpecifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithmProvide public key algorithm here if the certificate is not available on the pre-signing stage.
FailureResponseThe web page showed to the user by the component on authorization failure.
FIPSModeReserved.
GrantTypeSpecifies which protocol flow should be used to authorize the user.
IDTokenContains the ID Token parameter for JWT.
KeepAlivePolicyDefines the keep-alive handling policy.
KnownCertCountThe number of records in the KnownCert arrays.
KnownCertBytesReturns raw certificate data in DER format.
KnownCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownCRLCountThe number of records in the KnownCRL arrays.
KnownCRLBytesReturns raw CRL data in DER format.
KnownCRLHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
KnownOCSPCountThe number of records in the KnownOCSP arrays.
KnownOCSPBytesBuffer containing raw OCSP response data.
KnownOCSPHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
PasswordThe connecting user's authentication password.
ProxyAddressThe IP address of the proxy server.
ProxyAuthenticationThe authentication type used by the proxy server.
ProxyPasswordThe password to authenticate to the proxy server.
ProxyPortThe port on the proxy server to connect to.
ProxyProxyTypeThe type of the proxy server.
ProxyRequestHeadersContains HTTP request headers for WebTunnel and HTTP proxy.
ProxyResponseBodyContains the HTTP or HTTPS (WebTunnel) proxy response body.
ProxyResponseHeadersContains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
ProxyUseIPv6Specifies whether IPv6 should be used when connecting through the proxy.
ProxyUseProxyEnables or disables proxy-driven connection.
ProxyUsernameSpecifies the username credential for proxy authentication.
RedirectURLThe URL where the user is redirected after authorization.
RefreshTokenThe refresh token, to be used to automatically obtain new access token.
ScopeThe scope of the request to be authorized.
ServerCertCountThe number of records in the ServerCert arrays.
ServerCertBytesReturns raw certificate data in DER format.
ServerCertCAKeyIDA unique identifier (fingerprint) of the CA certificate's private key.
ServerCertFingerprintContains the fingerprint (a hash imprint) of this certificate.
ServerCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
ServerCertIssuerThe common name of the certificate issuer (CA), typically a company name.
ServerCertIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
ServerCertKeyAlgorithmSpecifies the public key algorithm of this certificate.
ServerCertKeyBitsReturns the length of the public key.
ServerCertKeyFingerprintReturns a fingerprint of the public key contained in the certificate.
ServerCertKeyUsageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
ServerCertPublicKeyBytesContains the certificate's public key in DER format.
ServerCertSelfSignedIndicates whether the certificate is self-signed (root) or signed by an external CA.
ServerCertSerialNumberReturns the certificate's serial number.
ServerCertSigAlgorithmIndicates the algorithm that was used by the CA to sign this certificate.
ServerCertSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
ServerCertSubjectKeyIDContains a unique identifier (fingerprint) of the certificate's private key.
ServerCertSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
ServerCertValidFromThe time point at which the certificate becomes valid, in UTC.
ServerCertValidToThe time point at which the certificate expires, in UTC.
SocketDNSModeSelects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
SocketDNSPortSpecifies the port number to be used for sending queries to the DNS server.
SocketDNSQueryTimeoutThe timeout (in milliseconds) for each DNS query.
SocketDNSServersThe addresses of DNS servers to use for address resolution, separated by commas or semicolons.
SocketDNSTotalTimeoutThe timeout (in milliseconds) for the whole resolution process.
SocketIncomingSpeedLimitThe maximum number of bytes to read from the socket, per second.
SocketLocalAddressThe local network interface to bind the socket to.
SocketLocalPortThe local port number to bind the socket to.
SocketOutgoingSpeedLimitThe maximum number of bytes to write to the socket, per second.
SocketTimeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
SocketUseIPv6Enables or disables IP protocol version 6.
StateSpecifies the state parameter of the authorization request or response.
SuccessResponseThe web page showed to the user by the component on authorization success.
TimeoutSpecifies waiting timeout (in milliseconds).
TLSAutoValidateCertificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
TLSBaseConfigurationSelects the base configuration for the TLS settings.
TLSCiphersuitesA list of ciphersuites separated with commas or semicolons.
TLSECCurvesDefines the elliptic curves to enable.
TLSExtensionsProvides access to TLS extensions.
TLSForceResumeIfDestinationChangesWhether to force TLS session resumption when the destination address changes.
TLSPreSharedIdentityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
TLSPreSharedKeyContains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
TLSPreSharedKeyCiphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
TLSRenegotiationAttackPreventionModeSelects renegotiation attack prevention mechanism.
TLSRevocationCheckSpecifies the kind(s) of revocation check to perform.
TLSSSLOptionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
TLSTLSModeSpecifies the TLS mode to use.
TLSUseExtendedMasterSecretEnables Extended Master Secret Extension, as defined in RFC 7627.
TLSUseSessionResumptionEnables or disables TLS session resumption capability.
TLSVersionsThe SSL/TLS versions to enable by default.
TokenTypeReturns the access token type.
TokenURLSpecifies the URL of the token endpoint.
TrustedCertCountThe number of records in the TrustedCert arrays.
TrustedCertBytesReturns raw certificate data in DER format.
TrustedCertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
UsernameThe connecting user's username (login name).

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AuthorizePerforms user authorization and gets an access token.
ConfigSets or retrieves a configuration setting.
DoActionPerforms an additional action.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorProvides information about errors during authorization operations.
ExternalSignHandles remote or external signing initiated by the SignExternal method or other source.
LaunchBrowserFires to show the login page to the end-user.
TLSCertNeededFires when a remote TLS party requests a client certificate.
TLSCertValidateThis event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
TLSEstablishedFires when a TLS handshake with Host successfully completes.
TLSHandshakeFires when a new TLS handshake is initiated, before the handshake commences.
TLSPSKNotifies the application about the PSK key exchange.
TLSShutdownReports the graceful closure of a TLS connection.
WaitFired periodically to show how much waiting time is left.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AddOpenIDScopeUsed to set whether the component should add 'openid' to the scope automatically.
CacheControlOptional value for Cache-Control HTTP header field.
EncodeScopeUsed to set whether the component should URL-encode the scope parameter.
GrantTypeStringUsed to set a custom grant type string.
IDTokenID Token parameter for JWT.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
ListenURLThe URL where to listen for redirection from the user web browser.
LocalServerBaseConfigurationBase configuration for the internal TLS server if an HTTPS redirect is used.
LocalServerCiphersuitesCiphersuites allowed for the internal TLS server if an HTTPS redirect is used.
LocalServerVersionsThe SSL/TLS versions to enable for the internal TLS server if an HTTPS redirect is used.
PKCEModeProof Key for Code Exchange method to use.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
UseMicrosoftCTLEnables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the component.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client components should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AccessToken Property (OAuthClient Component)

Contains the access token.

Syntax

__property String AccessToken = { read=FAccessToken, write=FSetAccessToken };

Default Value

""

Remarks

Use this property to check or set the authorization access token.

This property is not available at design time.

Data Type

String

AuthURL Property (OAuthClient Component)

Specifies the URL of the authorization server.

Syntax

__property String AuthURL = { read=FAuthURL, write=FSetAuthURL };

Default Value

""

Remarks

Use this property to set the URL of the authorization server.

Data Type

String

AutoRefresh Property (OAuthClient Component)

Specifies whether access token should be automatically refreshed.

Syntax

__property bool AutoRefresh = { read=FAutoRefresh, write=FSetAutoRefresh };

Default Value

true

Remarks

Set this property to true to let the component automatically refresh AccessToken. If available, RefreshToken is used to renew access token. Otherwise the authorization process is initiated from the beginning, with user authentication and so on.

Data Type

Boolean

BlockedCertCount Property (OAuthClient Component)

The number of records in the BlockedCert arrays.

Syntax

__property int BlockedCertCount = { read=FBlockedCertCount, write=FSetBlockedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (OAuthClient Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray BlockedCertBytes[int BlockedCertIndex] = { read=FBlockedCertBytes };

Remarks

Returns raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 BlockedCertHandle[int BlockedCertIndex] = { read=FBlockedCertHandle, write=FSetBlockedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

ClientCertCount Property (OAuthClient Component)

The number of records in the ClientCert arrays.

Syntax

__property int ClientCertCount = { read=FClientCertCount, write=FSetClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

ClientCertBytes Property (OAuthClient Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray ClientCertBytes[int ClientCertIndex] = { read=FClientCertBytes };

Remarks

Returns raw certificate data in DER format.

The ClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ClientCertHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 ClientCertHandle[int ClientCertIndex] = { read=FClientCertHandle, write=FSetClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The ClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ClientCertCount property.

This property is not available at design time.

Data Type

Long64

ClientID Property (OAuthClient Component)

Client ID of the application which needs access to the protected resource.

Syntax

__property String ClientID = { read=FClientID, write=FSetClientID };

Default Value

""

Remarks

Use this property to specify the client ID of the application.

Data Type

String

ClientSecret Property (OAuthClient Component)

Client secret of the application which needs access to the protected resource.

Syntax

__property String ClientSecret = { read=FClientSecret, write=FSetClientSecret };

Default Value

""

Remarks

Use this property to specify client secret of the application.

Data Type

String

ConnInfoAEADCipher Property (OAuthClient Component)

Indicates whether the encryption algorithm used is an AEAD cipher.

Syntax

__property bool ConnInfoAEADCipher = { read=FConnInfoAEADCipher };

Default Value

false

Remarks

Indicates whether the encryption algorithm used is an AEAD cipher.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoChainValidationDetails Property (OAuthClient Component)

The details of a certificate chain validation outcome.

Syntax

__property int ConnInfoChainValidationDetails = { read=FConnInfoChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoChainValidationResult Property (OAuthClient Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxOAuthClientConnInfoChainValidationResults ConnInfoChainValidationResult = { read=FConnInfoChainValidationResult };
enum TsbxOAuthClientConnInfoChainValidationResults { cvtValid=0, cvtValidButUntrusted=1, cvtInvalid=2, cvtCantBeEstablished=3 };

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoCiphersuite Property (OAuthClient Component)

The cipher suite employed by this connection.

Syntax

__property String ConnInfoCiphersuite = { read=FConnInfoCiphersuite };

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoClientAuthenticated Property (OAuthClient Component)

Specifies whether client authentication was performed during this connection.

Syntax

__property bool ConnInfoClientAuthenticated = { read=FConnInfoClientAuthenticated };

Default Value

false

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoClientAuthRequested Property (OAuthClient Component)

Specifies whether client authentication was requested during this connection.

Syntax

__property bool ConnInfoClientAuthRequested = { read=FConnInfoClientAuthRequested };

Default Value

false

Remarks

Specifies whether client authentication was requested during this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoConnectionEstablished Property (OAuthClient Component)

Indicates whether the connection has been established fully.

Syntax

__property bool ConnInfoConnectionEstablished = { read=FConnInfoConnectionEstablished };

Default Value

false

Remarks

Indicates whether the connection has been established fully.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoConnectionID Property (OAuthClient Component)

The unique identifier assigned to this connection.

Syntax

__property DynamicArray ConnInfoConnectionID = { read=FConnInfoConnectionID };

Remarks

The unique identifier assigned to this connection.

This property is read-only and not available at design time.

Data Type

Byte Array

ConnInfoDigestAlgorithm Property (OAuthClient Component)

The digest algorithm used in a TLS-enabled connection.

Syntax

__property String ConnInfoDigestAlgorithm = { read=FConnInfoDigestAlgorithm };

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoEncryptionAlgorithm Property (OAuthClient Component)

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

__property String ConnInfoEncryptionAlgorithm = { read=FConnInfoEncryptionAlgorithm };

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoExportable Property (OAuthClient Component)

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

Syntax

__property bool ConnInfoExportable = { read=FConnInfoExportable };

Default Value

false

Remarks

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoKeyExchangeAlgorithm Property (OAuthClient Component)

The key exchange algorithm used in a TLS-enabled connection.

Syntax

__property String ConnInfoKeyExchangeAlgorithm = { read=FConnInfoKeyExchangeAlgorithm };

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoKeyExchangeKeyBits Property (OAuthClient Component)

The length of the key exchange key of a TLS-enabled connection.

Syntax

__property int ConnInfoKeyExchangeKeyBits = { read=FConnInfoKeyExchangeKeyBits };

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoNamedECCurve Property (OAuthClient Component)

The elliptic curve used in this connection.

Syntax

__property String ConnInfoNamedECCurve = { read=FConnInfoNamedECCurve };

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only and not available at design time.

Data Type

String

ConnInfoPFSCipher Property (OAuthClient Component)

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

__property bool ConnInfoPFSCipher = { read=FConnInfoPFSCipher };

Default Value

false

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoPreSharedIdentityHint Property (OAuthClient Component)

A hint professed by the server to help the client select the PSK identity to use.

Syntax

__property String ConnInfoPreSharedIdentityHint = { read=FConnInfoPreSharedIdentityHint };

Default Value

""

Remarks

A hint professed by the server to help the client select the PSK identity to use.

This property is read-only and not available at design time.

Data Type

String

ConnInfoPublicKeyBits Property (OAuthClient Component)

The length of the public key.

Syntax

__property int ConnInfoPublicKeyBits = { read=FConnInfoPublicKeyBits };

Default Value

0

Remarks

The length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoResumedSession Property (OAuthClient Component)

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

__property bool ConnInfoResumedSession = { read=FConnInfoResumedSession };

Default Value

false

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoSecureConnection Property (OAuthClient Component)

Indicates whether TLS or SSL is enabled for this connection.

Syntax

__property bool ConnInfoSecureConnection = { read=FConnInfoSecureConnection };

Default Value

false

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoServerAuthenticated Property (OAuthClient Component)

Indicates whether server authentication was performed during a TLS-enabled connection.

Syntax

__property bool ConnInfoServerAuthenticated = { read=FConnInfoServerAuthenticated };

Default Value

false

Remarks

Indicates whether server authentication was performed during a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

Boolean

ConnInfoSignatureAlgorithm Property (OAuthClient Component)

The signature algorithm used in a TLS handshake.

Syntax

__property String ConnInfoSignatureAlgorithm = { read=FConnInfoSignatureAlgorithm };

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only and not available at design time.

Data Type

String

ConnInfoSymmetricBlockSize Property (OAuthClient Component)

The block size of the symmetric algorithm used.

Syntax

__property int ConnInfoSymmetricBlockSize = { read=FConnInfoSymmetricBlockSize };

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoSymmetricKeyBits Property (OAuthClient Component)

The key length of the symmetric algorithm used.

Syntax

__property int ConnInfoSymmetricKeyBits = { read=FConnInfoSymmetricKeyBits };

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

ConnInfoTotalBytesReceived Property (OAuthClient Component)

The total number of bytes received over this connection.

Syntax

__property __int64 ConnInfoTotalBytesReceived = { read=FConnInfoTotalBytesReceived };

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only and not available at design time.

Data Type

Long64

ConnInfoTotalBytesSent Property (OAuthClient Component)

The total number of bytes sent over this connection.

Syntax

__property __int64 ConnInfoTotalBytesSent = { read=FConnInfoTotalBytesSent };

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only and not available at design time.

Data Type

Long64

ConnInfoValidationLog Property (OAuthClient Component)

Contains the server certificate's chain validation log.

Syntax

__property String ConnInfoValidationLog = { read=FConnInfoValidationLog };

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only and not available at design time.

Data Type

String

ConnInfoVersion Property (OAuthClient Component)

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

__property String ConnInfoVersion = { read=FConnInfoVersion };

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only and not available at design time.

Data Type

String

CustomParamCount Property (OAuthClient Component)

The number of records in the CustomParams arrays.

Syntax

__property int CustomParamCount = { read=FCustomParamCount, write=FSetCustomParamCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at CustomParamCount - 1.

This property is not available at design time.

Data Type

Integer

CustomParamsCategory Property (OAuthClient Component)

Specifies the string category of the contained value.

Syntax

__property String CustomParamsCategory[int CustomParamIndex] = { read=FCustomParamsCategory, write=FSetCustomParamsCategory };

Default Value

""

Remarks

Specifies the string category of the contained value.

This property allows to check or set the category (or type) associated with the contained value. Depending on the format used to load or save the string, the category parameter may or may not be used.

For example, for ASN.1 property lists the category contains the ASN.1 tag of the contained data (OCTETSTRING, UTF8STRING, INTEGER, ...). For basic (name, value) pairs, such as HTTP headers, the category parameter is not used.

The CustomParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomParamCount property.

This property is not available at design time.

Data Type

String

CustomParamsFormat Property (OAuthClient Component)

Specifies the format (encoding) of the value contained in the Value property.

Syntax

__property int CustomParamsFormat[int CustomParamIndex] = { read=FCustomParamsFormat, write=FSetCustomParamsFormat };

Default Value

0

Remarks

Specifies the format (encoding) of the value contained in the CustomParamsValue property.

Use this property to check or set the format of the contained value. Remember to provide the actual value in the appropriate format that matches this setting: utils.NameValuePairs[0].Name = "key"; utils.NameValuePairs[0].Format = svfBinary; utils.NameValuePairs[0].Name = "0a1b2c3d4e5f6071";

The following formats are currently supported:

svfText0The property contains text

svfBinary1The property contains binary data. The Value property contains a hex encoding of it.

The CustomParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomParamCount property.

This property is not available at design time.

Data Type

Integer

CustomParamsName Property (OAuthClient Component)

The name element in a (name, value) pair.

Syntax

__property String CustomParamsName[int CustomParamIndex] = { read=FCustomParamsName, write=FSetCustomParamsName };

Default Value

""

Remarks

The name element in a (name, value) pair.

The CustomParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomParamCount property.

This property is not available at design time.

Data Type

String

CustomParamsValue Property (OAuthClient Component)

The value element in a (name, value) pair.

Syntax

__property String CustomParamsValue[int CustomParamIndex] = { read=FCustomParamsValue, write=FSetCustomParamsValue };

Default Value

""

Remarks

The value element in a (name, value) pair.

The CustomParamIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CustomParamCount property.

This property is not available at design time.

Data Type

String

ExpiresAt Property (OAuthClient Component)

The expiration time of access token.

Syntax

__property String ExpiresAt = { read=FExpiresAt, write=FSetExpiresAt };

Default Value

""

Remarks

Use this property to check the expiration time of AccessToken.

Data Type

String

ExpiresIn Property (OAuthClient Component)

Returns access token lifetime in seconds.

Syntax

__property int ExpiresIn = { read=FExpiresIn };

Default Value

0

Remarks

Use this property to get the AccessToken lifetime in seconds. This value is returned by the authorization server together with the access token. To check the token's expiration moment, use ExpiresAt property.

This property is read-only and not available at design time.

Data Type

Integer

ExternalCryptoAsyncDocumentID Property (OAuthClient Component)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

__property String ExternalCryptoAsyncDocumentID = { read=FExternalCryptoAsyncDocumentID, write=FSetExternalCryptoAsyncDocumentID };

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (OAuthClient Component)

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

__property String ExternalCryptoCustomParams = { read=FExternalCryptoCustomParams, write=FSetExternalCryptoCustomParams };

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (OAuthClient Component)

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

__property String ExternalCryptoData = { read=FExternalCryptoData, write=FSetExternalCryptoData };

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (OAuthClient Component)

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

__property bool ExternalCryptoExternalHashCalculation = { read=FExternalCryptoExternalHashCalculation, write=FSetExternalCryptoExternalHashCalculation };

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (OAuthClient Component)

Specifies the request's signature hash algorithm.

Syntax

__property String ExternalCryptoHashAlgorithm = { read=FExternalCryptoHashAlgorithm, write=FSetExternalCryptoHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Data Type

String

ExternalCryptoKeyID Property (OAuthClient Component)

The ID of the pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeyID = { read=FExternalCryptoKeyID, write=FSetExternalCryptoKeyID };

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (OAuthClient Component)

The pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeySecret = { read=FExternalCryptoKeySecret, write=FSetExternalCryptoKeySecret };

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (OAuthClient Component)

Specifies the asynchronous signing method.

Syntax

__property TsbxOAuthClientExternalCryptoMethods ExternalCryptoMethod = { read=FExternalCryptoMethod, write=FSetExternalCryptoMethod };
enum TsbxOAuthClientExternalCryptoMethods { asmdPKCS1=0, asmdPKCS7=1 };

Default Value

asmdPKCS1

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Data Type

Integer

ExternalCryptoMode Property (OAuthClient Component)

Specifies the external cryptography mode.

Syntax

__property TsbxOAuthClientExternalCryptoModes ExternalCryptoMode = { read=FExternalCryptoMode, write=FSetExternalCryptoMode };
enum TsbxOAuthClientExternalCryptoModes { ecmDefault=0, ecmDisabled=1, ecmGeneric=2, ecmDCAuth=3, ecmDCAuthJSON=4 };

Default Value

ecmDefault

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (OAuthClient Component)

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

__property String ExternalCryptoPublicKeyAlgorithm = { read=FExternalCryptoPublicKeyAlgorithm, write=FSetExternalCryptoPublicKeyAlgorithm };

Default Value

""

Remarks

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Data Type

String

FailureResponse Property (OAuthClient Component)

The web page showed to the user by the component on authorization failure.

Syntax

__property String FailureResponse = { read=FFailureResponse, write=FSetFailureResponse };

Default Value

""

Remarks

This property contains the html of the web page to be shown on authorization failure.

Data Type

String

FIPSMode Property (OAuthClient Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

GrantType Property (OAuthClient Component)

Specifies which protocol flow should be used to authorize the user.

Syntax

__property TsbxOAuthClientGrantTypes GrantType = { read=FGrantType, write=FSetGrantType };
enum TsbxOAuthClientGrantTypes { ogtAuthorizationCode=0, ogtImplicit=1, ogtPasswordCredentials=2, ogtClientCredentials=3, ogtHybridIdToken=4, ogtHybridToken=5, ogtHybridAll=6 };

Default Value

ogtAuthorizationCode

Remarks

Use this property to specify the authorization protocol to use.

ogtAuthorizationCode0Authorization Code flow should be used (see RFC 6749 Section 1.3.1)
ogtImplicit1Implicit flow should be used (see RFC 6749 Section 1.3.2)
ogtPasswordCredentials2Resource Owner Password Credentials flow should be used (see RFC 6749 Section 1.3.3)
ogtClientCredentials3Client Credentials flow should be used (see RFC 6749 Section 1.3.4)
ogtHybridIdToken4Hybrid flow should be used to get an access token and an ID token
ogtHybridToken5Hybrid flow should be used to get an access token
ogtHybridAll6Hybrid flow should be used to get an access token and an ID token

Data Type

Integer

IDToken Property (OAuthClient Component)

Contains the ID Token parameter for JWT.

Syntax

__property String IDToken = { read=FIDToken };

Default Value

""

Remarks

Use this property to get the id_token parameter (if any) than can be used for JWT operations.

This property is read-only and not available at design time.

Data Type

String

KeepAlivePolicy Property (OAuthClient Component)

Defines the keep-alive handling policy.

Syntax

__property TsbxOAuthClientKeepAlivePolicies KeepAlivePolicy = { read=FKeepAlivePolicy, write=FSetKeepAlivePolicy };
enum TsbxOAuthClientKeepAlivePolicies { ckapStandardDefined=0, ckapPreferKeepAlive=1, ckapRelyOnServer=2, ckapKeepAlivesDisabled=3 };

Default Value

ckapStandardDefined

Remarks

Use this property to tune-up the keep-alive mechanism as per the needs of your application.

ckapStandardDefined0Follow the standard
ckapPreferKeepAlive1Always request a keep-alive connection
ckapRelyOnServer2Not include the "Connection" header, allowing the server to choose the keep-alive mode
ckapKeepAlivesDisabled3Disable keep-alives by including the "Connection: Close" header

Data Type

Integer

KnownCertCount Property (OAuthClient Component)

The number of records in the KnownCert arrays.

Syntax

__property int KnownCertCount = { read=FKnownCertCount, write=FSetKnownCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (OAuthClient Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray KnownCertBytes[int KnownCertIndex] = { read=FKnownCertBytes };

Remarks

Returns raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCertHandle[int KnownCertIndex] = { read=FKnownCertHandle, write=FSetKnownCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (OAuthClient Component)

The number of records in the KnownCRL arrays.

Syntax

__property int KnownCRLCount = { read=FKnownCRLCount, write=FSetKnownCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (OAuthClient Component)

Returns raw CRL data in DER format.

Syntax

__property DynamicArray KnownCRLBytes[int KnownCRLIndex] = { read=FKnownCRLBytes };

Remarks

Returns raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCRLHandle[int KnownCRLIndex] = { read=FKnownCRLHandle, write=FSetKnownCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (OAuthClient Component)

The number of records in the KnownOCSP arrays.

Syntax

__property int KnownOCSPCount = { read=FKnownOCSPCount, write=FSetKnownOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (OAuthClient Component)

Buffer containing raw OCSP response data.

Syntax

__property DynamicArray KnownOCSPBytes[int KnownOCSPIndex] = { read=FKnownOCSPBytes };

Remarks

Buffer containing raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownOCSPHandle[int KnownOCSPIndex] = { read=FKnownOCSPHandle, write=FSetKnownOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

Password Property (OAuthClient Component)

The connecting user's authentication password.

Syntax

__property String Password = { read=FPassword, write=FSetPassword };

Default Value

""

Remarks

Assign the user's authentication password to this property. Use Username for username/login. The Username and Password properties are used only when GrantType is oauthPasswordCredentials.

Data Type

String

ProxyAddress Property (OAuthClient Component)

The IP address of the proxy server.

Syntax

__property String ProxyAddress = { read=FProxyAddress, write=FSetProxyAddress };

Default Value

""

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (OAuthClient Component)

The authentication type used by the proxy server.

Syntax

__property TsbxOAuthClientProxyAuthentications ProxyAuthentication = { read=FProxyAuthentication, write=FSetProxyAuthentication };
enum TsbxOAuthClientProxyAuthentications { patNoAuthentication=0, patBasic=1, patDigest=2, patNTLM=3 };

Default Value

patNoAuthentication

Remarks

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Data Type

Integer

ProxyPassword Property (OAuthClient Component)

The password to authenticate to the proxy server.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (OAuthClient Component)

The port on the proxy server to connect to.

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (OAuthClient Component)

The type of the proxy server.

Syntax

__property TsbxOAuthClientProxyProxyTypes ProxyProxyType = { read=FProxyProxyType, write=FSetProxyProxyType };
enum TsbxOAuthClientProxyProxyTypes { cptNone=0, cptSocks4=1, cptSocks5=2, cptWebTunnel=3, cptHTTP=4 };

Default Value

cptNone

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

Data Type

Integer

ProxyRequestHeaders Property (OAuthClient Component)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

__property String ProxyRequestHeaders = { read=FProxyRequestHeaders, write=FSetProxyRequestHeaders };

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (OAuthClient Component)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

__property String ProxyResponseBody = { read=FProxyResponseBody, write=FSetProxyResponseBody };

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (OAuthClient Component)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

__property String ProxyResponseHeaders = { read=FProxyResponseHeaders, write=FSetProxyResponseHeaders };

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (OAuthClient Component)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

__property bool ProxyUseIPv6 = { read=FProxyUseIPv6, write=FSetProxyUseIPv6 };

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (OAuthClient Component)

Enables or disables proxy-driven connection.

Syntax

__property bool ProxyUseProxy = { read=FProxyUseProxy, write=FSetProxyUseProxy };

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (OAuthClient Component)

Specifies the username credential for proxy authentication.

Syntax

__property String ProxyUsername = { read=FProxyUsername, write=FSetProxyUsername };

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RedirectURL Property (OAuthClient Component)

The URL where the user is redirected after authorization.

Syntax

__property String RedirectURL = { read=FRedirectURL, write=FSetRedirectURL };

Default Value

""

Remarks

Use this property to specify the URL on which the local HTTP server should open the listening port and wait for response from the authorization server. When the port number is explicitly specified, e.g., "http://localhost:5050/", the application has to be allowed to open a listening socket on that port.

HTTPS redirects support

Services increasingly require that redirects are made to HTTPS-enabled endpoints (e.g. "https://localhost:5050/"). OAuthClient does support them, but you are expected to do a little tuneup to be able to handle them.

What you need to do is set up the TLS server certificate that the OAuth receiver will be presenting to the user's web browser. The certificate is an integral part of the TLS handshake process. You can provide the certificate to the component using the AddLocalServerCertificate or AddLocalServerCertificateFromFile actions. See DoAction for the details.

The provided TLS certificate must contain a matching private key. You can generate the certificate using the CertificateManager component, or third-party software such as OpenSSL. Note that some browsers no longer accept self-signed TLS certificates, which typically means that you need to generate and set up a pair of certificates (the self-signed root certificate and the subordinate web server certificate) to make your receiver work with such browsers.

Data Type

String

RefreshToken Property (OAuthClient Component)

The refresh token, to be used to automatically obtain new access token.

Syntax

__property String RefreshToken = { read=FRefreshToken, write=FSetRefreshToken };

Default Value

""

Remarks

The refresh token is used to obtain new AccessToken without user authentication.

Data Type

String

Scope Property (OAuthClient Component)

The scope of the request to be authorized.

Syntax

__property String Scope = { read=FScope, write=FSetScope };

Default Value

""

Remarks

Use this property to specify the scope of the request to the protected resource.

Data Type

String

ServerCertCount Property (OAuthClient Component)

The number of records in the ServerCert arrays.

Syntax

__property int ServerCertCount = { read=FServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at ServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertBytes Property (OAuthClient Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray ServerCertBytes[int ServerCertIndex] = { read=FServerCertBytes };

Remarks

Returns raw certificate data in DER format.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertCAKeyID Property (OAuthClient Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray ServerCertCAKeyID[int ServerCertIndex] = { read=FServerCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertFingerprint Property (OAuthClient Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray ServerCertFingerprint[int ServerCertIndex] = { read=FServerCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 ServerCertHandle[int ServerCertIndex] = { read=FServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

ServerCertIssuer Property (OAuthClient Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String ServerCertIssuer[int ServerCertIndex] = { read=FServerCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertIssuerRDN Property (OAuthClient Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String ServerCertIssuerRDN[int ServerCertIndex] = { read=FServerCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertKeyAlgorithm Property (OAuthClient Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String ServerCertKeyAlgorithm[int ServerCertIndex] = { read=FServerCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertKeyBits Property (OAuthClient Component)

Returns the length of the public key.

Syntax

__property int ServerCertKeyBits[int ServerCertIndex] = { read=FServerCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertKeyFingerprint Property (OAuthClient Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray ServerCertKeyFingerprint[int ServerCertIndex] = { read=FServerCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertKeyUsage Property (OAuthClient Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int ServerCertKeyUsage[int ServerCertIndex] = { read=FServerCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

ServerCertPublicKeyBytes Property (OAuthClient Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray ServerCertPublicKeyBytes[int ServerCertIndex] = { read=FServerCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSelfSigned Property (OAuthClient Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool ServerCertSelfSigned[int ServerCertIndex] = { read=FServerCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ServerCertSerialNumber Property (OAuthClient Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray ServerCertSerialNumber[int ServerCertIndex] = { read=FServerCertSerialNumber };

Remarks

Returns the certificate's serial number.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSigAlgorithm Property (OAuthClient Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String ServerCertSigAlgorithm[int ServerCertIndex] = { read=FServerCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertSubject Property (OAuthClient Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String ServerCertSubject[int ServerCertIndex] = { read=FServerCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertSubjectKeyID Property (OAuthClient Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray ServerCertSubjectKeyID[int ServerCertIndex] = { read=FServerCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertSubjectRDN Property (OAuthClient Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String ServerCertSubjectRDN[int ServerCertIndex] = { read=FServerCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertValidFrom Property (OAuthClient Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String ServerCertValidFrom[int ServerCertIndex] = { read=FServerCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

ServerCertValidTo Property (OAuthClient Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String ServerCertValidTo[int ServerCertIndex] = { read=FServerCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

SocketDNSMode Property (OAuthClient Component)

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Syntax

__property TsbxOAuthClientSocketDNSModes SocketDNSMode = { read=FSocketDNSMode, write=FSetSocketDNSMode };
enum TsbxOAuthClientSocketDNSModes { dmAuto=0, dmPlatform=1, dmOwn=2, dmOwnSecure=3 };

Default Value

dmAuto

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

Data Type

Integer

SocketDNSPort Property (OAuthClient Component)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

__property int SocketDNSPort = { read=FSocketDNSPort, write=FSetSocketDNSPort };

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (OAuthClient Component)

The timeout (in milliseconds) for each DNS query.

Syntax

__property int SocketDNSQueryTimeout = { read=FSocketDNSQueryTimeout, write=FSetSocketDNSQueryTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

Data Type

Integer

SocketDNSServers Property (OAuthClient Component)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

__property String SocketDNSServers = { read=FSocketDNSServers, write=FSetSocketDNSServers };

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (OAuthClient Component)

The timeout (in milliseconds) for the whole resolution process.

Syntax

__property int SocketDNSTotalTimeout = { read=FSocketDNSTotalTimeout, write=FSetSocketDNSTotalTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (OAuthClient Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (OAuthClient Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (OAuthClient Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (OAuthClient Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (OAuthClient Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (OAuthClient Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

State Property (OAuthClient Component)

Specifies the state parameter of the authorization request or response.

Syntax

__property String State = { read=FState, write=FSetState };

Default Value

""

Remarks

This parameter contains an opaque value used by the client to maintain state between the request and callback. If this parameter was present in the authorization request, the server should include the same value in its response.

Data Type

String

SuccessResponse Property (OAuthClient Component)

The web page showed to the user by the component on authorization success.

Syntax

__property String SuccessResponse = { read=FSuccessResponse, write=FSetSuccessResponse };

Default Value

""

Remarks

This property contains the html of the web page to be shown on authorization success.

Data Type

String

Timeout Property (OAuthClient Component)

Specifies waiting timeout (in milliseconds).

Syntax

__property int Timeout = { read=FTimeout, write=FSetTimeout };

Default Value

120000

Remarks

This property specifies the timeout (in milliseconds) to wait for server's response.

Data Type

Integer

TLSAutoValidateCertificates Property (OAuthClient Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (OAuthClient Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxOAuthClientTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };
enum TsbxOAuthClientTLSBaseConfigurations { stpcDefault=0, stpcCompatible=1, stpcComprehensiveInsecure=2, stpcHighlySecure=3 };

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

Data Type

Integer

TLSCiphersuites Property (OAuthClient Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (OAuthClient Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (OAuthClient Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (OAuthClient Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (OAuthClient Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (OAuthClient Component)

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (OAuthClient Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (OAuthClient Component)

Selects renegotiation attack prevention mechanism.

Syntax

__property TsbxOAuthClientTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };
enum TsbxOAuthClientTLSRenegotiationAttackPreventionModes { crapmCompatible=0, crapmStrict=1, crapmAuto=2 };

Default Value

crapmCompatible

Remarks

Selects renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

Data Type

Integer

TLSRevocationCheck Property (OAuthClient Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxOAuthClientTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };
enum TsbxOAuthClientTLSRevocationChecks { crcNone=0, crcAuto=1, crcAllCRL=2, crcAllOCSP=3, crcAllCRLAndOCSP=4, crcAnyCRL=5, crcAnyOCSP=6, crcAnyCRLOrOCSP=7, crcAnyOCSPOrCRL=8 };

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2Check all provided CRL endpoints for all chain certificates.
crcAllOCSP3Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP4Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL5At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP6At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP7At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (OAuthClient Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send handshake message as large batches rather than individually

Data Type

Integer

TLSTLSMode Property (OAuthClient Component)

Specifies the TLS mode to use.

Syntax

__property TsbxOAuthClientTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };
enum TsbxOAuthClientTLSTLSModes { smDefault=0, smNoTLS=1, smExplicitTLS=2, smImplicitTLS=3, smMixedTLS=4 };

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, allow plain data.

Data Type

Integer

TLSUseExtendedMasterSecret Property (OAuthClient Component)

Enables Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (OAuthClient Component)

Enables or disables TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (OAuthClient Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Data Type

Integer

TokenType Property (OAuthClient Component)

Returns the access token type.

Syntax

__property String TokenType = { read=FTokenType };

Default Value

""

Remarks

The access token type provides a client with the information on how to use the AccessToken. The understanding of token type is the client's responsibility. Some token types are described, for instance, in RFC 6750 and OAuth-HTTP-MAC specifications.

This property is read-only and not available at design time.

Data Type

String

TokenURL Property (OAuthClient Component)

Specifies the URL of the token endpoint.

Syntax

__property String TokenURL = { read=FTokenURL, write=FSetTokenURL };

Default Value

""

Remarks

The token endpoint is used by the client, which needs access to protected resource, to obtain access token from the authorization server.

Data Type

String

TrustedCertCount Property (OAuthClient Component)

The number of records in the TrustedCert arrays.

Syntax

__property int TrustedCertCount = { read=FTrustedCertCount, write=FSetTrustedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (OAuthClient Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray TrustedCertBytes[int TrustedCertIndex] = { read=FTrustedCertBytes };

Remarks

Returns raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (OAuthClient Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TrustedCertHandle[int TrustedCertIndex] = { read=FTrustedCertHandle, write=FSetTrustedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

Username Property (OAuthClient Component)

The connecting user's username (login name).

Syntax

__property String Username = { read=FUsername, write=FSetUsername };

Default Value

""

Remarks

Assign the user's login name to this property. Use Password to provide the password. The Username and Password properties are used only when GrantType is oauthPasswordCredentials.

Data Type

String

Authorize Method (OAuthClient Component)

Performs user authorization and gets an access token.

Syntax

bool __fastcall Authorize();

Remarks

Call this method to perform user authorization and get an access token. When the user completes authorization and its data is sent to the server, OAuthClient will fire the Wait event periodically, to show how much waiting time is left. Upon successful authorization, the AccessToken and ExpiresAt properties are filled.

Returns true if the authorization was granted, and false otherwise.

Config Method (OAuthClient Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (OAuthClient Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ActionParametersReturned valueDescription
AddLocalServerCertificateCERTIFICATE - Base64 encoded data of the certificate

PASSWORD - the password to decode the certificate if needed

noneAdds a certificate to the local server certificates storage to present to the user's web browser.
AddLocalServerCertificateFromFileFILENAME - pathname of the certificate file

PASSWORD - the password to decode the certificate if needed

noneAdds a certificate from a file to the local server certificates storage to present to the user's web browser.
StartAuthorizationnoneThe URL where a web browser should be directed to let the user to authorize.If the returned value is empty, the access token was automatically renewed with RefreshToken and no further processing is needed.
CompleteAuthorizationauthorization codenoneExchanges the authorization code to an access token.

Error Event (OAuthClient Component)

Provides information about errors during authorization operations.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxOAuthClientErrorEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientErrorEvent)(System::TObject* Sender, TsbxOAuthClientErrorEventParams *e);
__property TsbxOAuthClientErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

This event is fired in case of exceptional conditions occured during authorization operations.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (OAuthClient Component)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

typedef struct {
  String OperationId;
  String HashAlgorithm;
  String Pars;
  String Data;
  String SignedData;
} TsbxOAuthClientExternalSignEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientExternalSignEvent)(System::TObject* Sender, TsbxOAuthClientExternalSignEventParams *e);
__property TsbxOAuthClientExternalSignEvent OnExternalSign = { read=FOnExternalSign, write=FOnExternalSign };

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

LaunchBrowser Event (OAuthClient Component)

Fires to show the login page to the end-user.

Syntax

typedef struct {
  String URL;
  bool Handled;
} TsbxOAuthClientLaunchBrowserEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientLaunchBrowserEvent)(System::TObject* Sender, TsbxOAuthClientLaunchBrowserEventParams *e);
__property TsbxOAuthClientLaunchBrowserEvent OnLaunchBrowser = { read=FOnLaunchBrowser, write=FOnLaunchBrowser };

Remarks

Subscribe to this event to respond to requests from the component to open the URL in the browser. Set Handled to true to report that the URL has been opened in the browser.

TLSCertNeeded Event (OAuthClient Component)

Fires when a remote TLS party requests a client certificate.

Syntax

typedef struct {
  String Host;
  String CANames;
} TsbxOAuthClientTLSCertNeededEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSCertNeededEvent)(System::TObject* Sender, TsbxOAuthClientTLSCertNeededEventParams *e);
__property TsbxOAuthClientTLSCertNeededEvent OnTLSCertNeeded = { read=FOnTLSCertNeeded, write=FOnTLSCertNeeded };

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (OAuthClient Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

typedef struct {
  String ServerHost;
  String ServerIP;
  bool Accept;
} TsbxOAuthClientTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSCertValidateEvent)(System::TObject* Sender, TsbxOAuthClientTLSCertValidateEventParams *e);
__property TsbxOAuthClientTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (OAuthClient Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

typedef struct {
  String Host;
  String Version;
  String Ciphersuite;
  DynamicArray ConnectionId;
  bool Abort;
} TsbxOAuthClientTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSEstablishedEvent)(System::TObject* Sender, TsbxOAuthClientTLSEstablishedEventParams *e);
__property TsbxOAuthClientTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

The component uses this event to notify the application about successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (OAuthClient Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

typedef struct {
  String Host;
  bool Abort;
} TsbxOAuthClientTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSHandshakeEvent)(System::TObject* Sender, TsbxOAuthClientTLSHandshakeEventParams *e);
__property TsbxOAuthClientTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed with TLSEstablished event. If the server chooses to request a client certificate, TLSCertNeeded event will also be fired.

TLSPSK Event (OAuthClient Component)

Notifies the application about the PSK key exchange.

Syntax

typedef struct {
  String Host;
  String Hint;
} TsbxOAuthClientTLSPSKEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSPSKEvent)(System::TObject* Sender, TsbxOAuthClientTLSPSKEventParams *e);
__property TsbxOAuthClientTLSPSKEvent OnTLSPSK = { read=FOnTLSPSK, write=FOnTLSPSK };

Remarks

The component fires this event to notify the application about the beginning of TLS-PSK key exchange with Host. The Hint parameter may be used by the server to identify the key or service to use. Use the PreSharedKey field of TLSSettings to provide the pre-shared key to the component.

TLSShutdown Event (OAuthClient Component)

Reports the graceful closure of a TLS connection.

Syntax

typedef struct {
  String Host;
} TsbxOAuthClientTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientTLSShutdownEvent)(System::TObject* Sender, TsbxOAuthClientTLSShutdownEventParams *e);
__property TsbxOAuthClientTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Wait Event (OAuthClient Component)

Fired periodically to show how much waiting time is left.

Syntax

typedef struct {
  int TimeLeft;
  bool Stop;
} TsbxOAuthClientWaitEventParams;
typedef void __fastcall (__closure *TsbxOAuthClientWaitEvent)(System::TObject* Sender, TsbxOAuthClientWaitEventParams *e);
__property TsbxOAuthClientWaitEvent OnWait = { read=FOnWait, write=FOnWait };

Remarks

This event is fired after authorization is started, to show how much time is left to wait for server's response. Waiting can be cancelled by setting the Stop parameter to true, which will result in authorization failure.

Config Settings (OAuthClient Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

OAuthClient Config Settings

AddOpenIDScope:   Used to set whether the component should add 'openid' to the scope automatically.

The component adds 'openid' to the scope automatically when a hybrid GrantType is specified. Set this property to false to not add 'openid' to the scope if it is needed for any reason. By default, it is true.

CacheControl:   Optional value for Cache-Control HTTP header field.

Specifies an optional value to be used in the Cache-Control header field of HTTP requests.

Recommended value: no-store,max-age=0

EncodeScope:   Used to set whether the component should URL-encode the scope parameter.

Some authentication services require scopes to be separated by a plus or other character, and not to be encoded in the URL. Set this property to false to prevent such encoding. By default, it is true.

GrantTypeString:   Used to set a custom grant type string.

This setting is used to set the grant_type parameter manually. This component will still consider the GrantType property to determine how it will function.

IDToken:   ID Token parameter for JWT.

This read-only value returns the id_token parameter (if any) than can be used for JWT operations.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

ListenURL:   The URL where to listen for redirection from the user web browser.

Specifies an URL where the component should wait for incoming connection from the user's web browser. If this value is empty, RedirectURL is used.

This property can be used if an external web server is used to handle the authorization server's reponse.

LocalServerBaseConfiguration:   Base configuration for the internal TLS server if an HTTPS redirect is used.

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

LocalServerCiphersuites:   Ciphersuites allowed for the internal TLS server if an HTTPS redirect is used.

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites.

See the TLSSettings.Ciphersuites property for the list of supported ciphersuites.

LocalServerVersions:   The SSL/TLS versions to enable for the internal TLS server if an HTTPS redirect is used.

The SSL/TLS versions to enable. By default, TLS 1.2 and TLS 1.3 are enabled.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

PKCEMode:   Proof Key for Code Exchange method to use.

Specifies which PKCE method should be used (if any) if GrantType is ogtAuthorizationCode.

noneDon't use PKCE
plainNo transformation should be used
s256SHA-256 transformation should be used
TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

  • CA, revocation source, TLS key usage requirements are not mandated
  • Violation of OCSP issuer requirements are ignored
  • AuthorityKeyID extension in CRL and certificate issuing CAs are ignored (helps with incorrectly renewed certificates)
  • Basic constraints and name constraints of CA certificates are ignored
  • Some weaker algorithms are tolerated
UseMicrosoftCTL:   Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the component.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the component.

Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the component. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the component is set to "local", the property returns/restores the rules from/to the internal storage of the component. If StaticDNS of the component is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the components.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (OAuthClient Component)