DTLSServer Component

Properties   Methods   Events   Config Settings   Errors  

The DTLSServer component provides server-side functionality of the DTLS protocol.

Syntax

TsbxDTLSServer

Remarks

Use this component to receive data over a protected DTLS channel in your applcation.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

Active Property (DTLSServer Component)

Indicates whether the server is active and is listening to new connections.

Syntax

__property bool Active = { read=FActive };

Default Value

false

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only and not available at design time.

Data Type

Boolean

BoundPort Property (DTLSServer Component)

Indicates the bound listening port.

Syntax

__property int BoundPort = { read=FBoundPort };

Default Value

0

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals Port if it is provided, or is allocated dynamically if configured to fall in the range between PortRangeFrom and PortRangeTo constraints.

This property is read-only and not available at design time.

Data Type

Integer

ErrorOrigin Property (DTLSServer Component)

Indicates the endpoint where the error originates from.

Syntax

__property TsbxDTLSServerErrorOrigins ErrorOrigin = { read=FErrorOrigin, write=FSetErrorOrigin };

enum TsbxDTLSServerErrorOrigins {
  eoLocal=0,
  eoRemote=1
};

Default Value

eoLocal

Remarks

Use this property to establish whether the reported error originates from a local or remote endpoint.

This property is not available at design time.

Data Type

Integer

ErrorSeverity Property (DTLSServer Component)

The severity of the error that happened.

Syntax

__property TsbxDTLSServerErrorSeverities ErrorSeverity = { read=FErrorSeverity, write=FSetErrorSeverity };

enum TsbxDTLSServerErrorSeverities {
  esInfo=0,
  esWarning=1,
  esFatal=2
};

Default Value

esWarning

Remarks

Use this property to establish whether the error is fatal.

This property is not available at design time.

Data Type

Integer

ExternalCryptoAsyncDocumentID Property (DTLSServer Component)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

__property String ExternalCryptoAsyncDocumentID = { read=FExternalCryptoAsyncDocumentID, write=FSetExternalCryptoAsyncDocumentID };

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (DTLSServer Component)

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

__property String ExternalCryptoCustomParams = { read=FExternalCryptoCustomParams, write=FSetExternalCryptoCustomParams };

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (DTLSServer Component)

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

__property String ExternalCryptoData = { read=FExternalCryptoData, write=FSetExternalCryptoData };

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (DTLSServer Component)

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

__property bool ExternalCryptoExternalHashCalculation = { read=FExternalCryptoExternalHashCalculation, write=FSetExternalCryptoExternalHashCalculation };

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth component.

If set to true, the component will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (DTLSServer Component)

Specifies the request's signature hash algorithm.

Syntax

__property String ExternalCryptoHashAlgorithm = { read=FExternalCryptoHashAlgorithm, write=FSetExternalCryptoHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

Data Type

String

ExternalCryptoKeyID Property (DTLSServer Component)

The ID of the pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeyID = { read=FExternalCryptoKeyID, write=FSetExternalCryptoKeyID };

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (DTLSServer Component)

The pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeySecret = { read=FExternalCryptoKeySecret, write=FSetExternalCryptoKeySecret };

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (DTLSServer Component)

Specifies the asynchronous signing method.

Syntax

__property TsbxDTLSServerExternalCryptoMethods ExternalCryptoMethod = { read=FExternalCryptoMethod, write=FSetExternalCryptoMethod };

enum TsbxDTLSServerExternalCryptoMethods {
  asmdPKCS1=0,
  asmdPKCS7=1
};

Default Value

asmdPKCS1

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

Data Type

Integer

ExternalCryptoMode Property (DTLSServer Component)

Specifies the external cryptography mode.

Syntax

__property TsbxDTLSServerExternalCryptoModes ExternalCryptoMode = { read=FExternalCryptoMode, write=FSetExternalCryptoMode };

enum TsbxDTLSServerExternalCryptoModes {
  ecmDefault=0,
  ecmDisabled=1,
  ecmGeneric=2,
  ecmDCAuth=3,
  ecmDCAuthJSON=4
};

Default Value

ecmDefault

Remarks

Specifies the external cryptography mode.

Available options:

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (DTLSServer Component)

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

__property String ExternalCryptoPublicKeyAlgorithm = { read=FExternalCryptoPublicKeyAlgorithm, write=FSetExternalCryptoPublicKeyAlgorithm };

Default Value

""

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Data Type

String

FIPSMode Property (DTLSServer Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

Host Property (DTLSServer Component)

The host to bind the listening port to.

Syntax

__property String Host = { read=FHost, write=FSetHost };

Default Value

""

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

Data Type

String

PinnedClientAddress Property (DTLSServer Component)

The client's IP address.

Syntax

__property String PinnedClientAddress = { read=FPinnedClientAddress };

Default Value

""

Remarks

The client's IP address.

This property is read-only and not available at design time.

Data Type

String

PinnedClientChainValidationDetails Property (DTLSServer Component)

The details of a certificate chain validation outcome.

Syntax

__property int PinnedClientChainValidationDetails = { read=FPinnedClientChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientChainValidationResult Property (DTLSServer Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxDTLSServerPinnedClientChainValidationResults PinnedClientChainValidationResult = { read=FPinnedClientChainValidationResult };

enum TsbxDTLSServerPinnedClientChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientCiphersuite Property (DTLSServer Component)

The cipher suite employed by this connection.

Syntax

__property String PinnedClientCiphersuite = { read=FPinnedClientCiphersuite };

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientClientAuthenticated Property (DTLSServer Component)

Specifies whether client authentication was performed during this connection.

Syntax

__property bool PinnedClientClientAuthenticated = { read=FPinnedClientClientAuthenticated };

Default Value

false

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only and not available at design time.

Data Type

Boolean

PinnedClientDigestAlgorithm Property (DTLSServer Component)

The digest algorithm used in a TLS-enabled connection.

Syntax

__property String PinnedClientDigestAlgorithm = { read=FPinnedClientDigestAlgorithm };

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientEncryptionAlgorithm Property (DTLSServer Component)

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

__property String PinnedClientEncryptionAlgorithm = { read=FPinnedClientEncryptionAlgorithm };

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientID Property (DTLSServer Component)

The client connection's unique identifier.

Syntax

__property __int64 PinnedClientID = { read=FPinnedClientID };

Default Value

-1

Remarks

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

This property is read-only and not available at design time.

Data Type

Long64

PinnedClientKeyExchangeAlgorithm Property (DTLSServer Component)

The key exchange algorithm used in a TLS-enabled connection.

Syntax

__property String PinnedClientKeyExchangeAlgorithm = { read=FPinnedClientKeyExchangeAlgorithm };

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientKeyExchangeKeyBits Property (DTLSServer Component)

The length of the key exchange key of a TLS-enabled connection.

Syntax

__property int PinnedClientKeyExchangeKeyBits = { read=FPinnedClientKeyExchangeKeyBits };

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientNamedECCurve Property (DTLSServer Component)

The elliptic curve used in this connection.

Syntax

__property String PinnedClientNamedECCurve = { read=FPinnedClientNamedECCurve };

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientPFSCipher Property (DTLSServer Component)

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

__property bool PinnedClientPFSCipher = { read=FPinnedClientPFSCipher };

Default Value

false

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only and not available at design time.

Data Type

Boolean

PinnedClientPort Property (DTLSServer Component)

The remote port of the client connection.

Syntax

__property int PinnedClientPort = { read=FPinnedClientPort };

Default Value

0

Remarks

The remote port of the client connection.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientPreSharedIdentity Property (DTLSServer Component)

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String PinnedClientPreSharedIdentity = { read=FPinnedClientPreSharedIdentity };

Default Value

""

Remarks

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is read-only and not available at design time.

Data Type

String

PinnedClientPublicKeyBits Property (DTLSServer Component)

The length of the public key.

Syntax

__property int PinnedClientPublicKeyBits = { read=FPinnedClientPublicKeyBits };

Default Value

0

Remarks

The length of the public key.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientResumedSession Property (DTLSServer Component)

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

__property bool PinnedClientResumedSession = { read=FPinnedClientResumedSession };

Default Value

false

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only and not available at design time.

Data Type

Boolean

PinnedClientSecureConnection Property (DTLSServer Component)

Indicates whether TLS or SSL is enabled for this connection.

Syntax

__property bool PinnedClientSecureConnection = { read=FPinnedClientSecureConnection };

Default Value

false

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only and not available at design time.

Data Type

Boolean

PinnedClientSignatureAlgorithm Property (DTLSServer Component)

The signature algorithm used in a TLS handshake.

Syntax

__property String PinnedClientSignatureAlgorithm = { read=FPinnedClientSignatureAlgorithm };

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only and not available at design time.

Data Type

String

PinnedClientSymmetricBlockSize Property (DTLSServer Component)

The block size of the symmetric algorithm used.

Syntax

__property int PinnedClientSymmetricBlockSize = { read=FPinnedClientSymmetricBlockSize };

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientSymmetricKeyBits Property (DTLSServer Component)

The key length of the symmetric algorithm used.

Syntax

__property int PinnedClientSymmetricKeyBits = { read=FPinnedClientSymmetricKeyBits };

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientTotalBytesReceived Property (DTLSServer Component)

The total number of bytes received over this connection.

Syntax

__property __int64 PinnedClientTotalBytesReceived = { read=FPinnedClientTotalBytesReceived };

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only and not available at design time.

Data Type

Long64

PinnedClientTotalBytesSent Property (DTLSServer Component)

The total number of bytes sent over this connection.

Syntax

__property __int64 PinnedClientTotalBytesSent = { read=FPinnedClientTotalBytesSent };

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only and not available at design time.

Data Type

Long64

PinnedClientValidationLog Property (DTLSServer Component)

Contains the server certificate's chain validation log.

Syntax

__property String PinnedClientValidationLog = { read=FPinnedClientValidationLog };

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only and not available at design time.

Data Type

String

PinnedClientVersion Property (DTLSServer Component)

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

__property String PinnedClientVersion = { read=FPinnedClientVersion };

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertCount Property (DTLSServer Component)

The number of records in the PinnedClientCert arrays.

Syntax

__property int PinnedClientCertCount = { read=FPinnedClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• PinnedClientCertBytes
• PinnedClientCertCAKeyID
• PinnedClientCertFingerprint
• PinnedClientCertHandle
• PinnedClientCertIssuer
• PinnedClientCertIssuerRDN
• PinnedClientCertKeyAlgorithm
• PinnedClientCertKeyBits
• PinnedClientCertKeyFingerprint
• PinnedClientCertKeyUsage
• PinnedClientCertPublicKeyBytes
• PinnedClientCertSelfSigned
• PinnedClientCertSerialNumber
• PinnedClientCertSigAlgorithm
• PinnedClientCertSubject
• PinnedClientCertSubjectKeyID
• PinnedClientCertSubjectRDN
• PinnedClientCertValidFrom
• PinnedClientCertValidTo

The array indices start at 0 and end at PinnedClientCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientCertBytes Property (DTLSServer Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray PinnedClientCertBytes[int PinnedClientCertIndex] = { read=FPinnedClientCertBytes };

Remarks

Returns the raw certificate data in DER format.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertCAKeyID Property (DTLSServer Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray PinnedClientCertCAKeyID[int PinnedClientCertIndex] = { read=FPinnedClientCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertFingerprint Property (DTLSServer Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray PinnedClientCertFingerprint[int PinnedClientCertIndex] = { read=FPinnedClientCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertHandle Property (DTLSServer Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 PinnedClientCertHandle[int PinnedClientCertIndex] = { read=FPinnedClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

PinnedClientCertIssuer Property (DTLSServer Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String PinnedClientCertIssuer[int PinnedClientCertIndex] = { read=FPinnedClientCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertIssuerRDN Property (DTLSServer Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String PinnedClientCertIssuerRDN[int PinnedClientCertIndex] = { read=FPinnedClientCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertKeyAlgorithm Property (DTLSServer Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String PinnedClientCertKeyAlgorithm[int PinnedClientCertIndex] = { read=FPinnedClientCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertKeyBits Property (DTLSServer Component)

Returns the length of the public key.

Syntax

__property int PinnedClientCertKeyBits[int PinnedClientCertIndex] = { read=FPinnedClientCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientCertKeyFingerprint Property (DTLSServer Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray PinnedClientCertKeyFingerprint[int PinnedClientCertIndex] = { read=FPinnedClientCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertKeyUsage Property (DTLSServer Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int PinnedClientCertKeyUsage[int PinnedClientCertIndex] = { read=FPinnedClientCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

PinnedClientCertPublicKeyBytes Property (DTLSServer Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray PinnedClientCertPublicKeyBytes[int PinnedClientCertIndex] = { read=FPinnedClientCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertSelfSigned Property (DTLSServer Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool PinnedClientCertSelfSigned[int PinnedClientCertIndex] = { read=FPinnedClientCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

PinnedClientCertSerialNumber Property (DTLSServer Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray PinnedClientCertSerialNumber[int PinnedClientCertIndex] = { read=FPinnedClientCertSerialNumber };

Remarks

Returns the certificate's serial number.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertSigAlgorithm Property (DTLSServer Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String PinnedClientCertSigAlgorithm[int PinnedClientCertIndex] = { read=FPinnedClientCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertSubject Property (DTLSServer Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String PinnedClientCertSubject[int PinnedClientCertIndex] = { read=FPinnedClientCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertSubjectKeyID Property (DTLSServer Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray PinnedClientCertSubjectKeyID[int PinnedClientCertIndex] = { read=FPinnedClientCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

PinnedClientCertSubjectRDN Property (DTLSServer Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String PinnedClientCertSubjectRDN[int PinnedClientCertIndex] = { read=FPinnedClientCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertValidFrom Property (DTLSServer Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String PinnedClientCertValidFrom[int PinnedClientCertIndex] = { read=FPinnedClientCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

PinnedClientCertValidTo Property (DTLSServer Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String PinnedClientCertValidTo[int PinnedClientCertIndex] = { read=FPinnedClientCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The PinnedClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the PinnedClientCertCount property.

This property is read-only and not available at design time.

Data Type

String

Port Property (DTLSServer Component)

Specifies the port number to listen for connections on.

Syntax

__property int Port = { read=FPort, write=FSetPort };

Default Value

80

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via PortRangeFrom and PortRangeTo properties. In this case the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Data Type

Integer

PortRangeFrom Property (DTLSServer Component)

Specifies the lower limit of the listening port range for incoming connections.

Syntax

__property int PortRangeFrom = { read=FPortRangeFrom, write=FSetPortRangeFrom };

Default Value

0

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

PortRangeTo Property (DTLSServer Component)

Specifies the upper limit of the listening port range for incoming connections.

Syntax

__property int PortRangeTo = { read=FPortRangeTo, write=FSetPortRangeTo };

Default Value

0

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

ServerCertCount Property (DTLSServer Component)

The number of records in the ServerCert arrays.

Syntax

__property int ServerCertCount = { read=FServerCertCount, write=FSetServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ServerCertBytes
• ServerCertHandle

The array indices start at 0 and end at ServerCertCount - 1.

This property is not available at design time.

Data Type

Integer

ServerCertBytes Property (DTLSServer Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray ServerCertBytes[int ServerCertIndex] = { read=FServerCertBytes };

Remarks

Returns the raw certificate data in DER format.

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

ServerCertHandle Property (DTLSServer Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 ServerCertHandle[int ServerCertIndex] = { read=FServerCertHandle, write=FSetServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The ServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ServerCertCount property.

This property is not available at design time.

Data Type

Long64

SocketIncomingSpeedLimit Property (DTLSServer Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (DTLSServer Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (DTLSServer Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (DTLSServer Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (DTLSServer Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (DTLSServer Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TLSAutoValidateCertificates Property (DTLSServer Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (DTLSServer Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxDTLSServerTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };

enum TsbxDTLSServerTLSBaseConfigurations {
  stpcDefault=0,
  stpcCompatible=1,
  stpcComprehensiveInsecure=2,
  stpcHighlySecure=3
};

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (DTLSServer Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (DTLSServer Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (DTLSServer Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (DTLSServer Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (DTLSServer Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (DTLSServer Component)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (DTLSServer Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (DTLSServer Component)

Selects the renegotiation attack prevention mechanism.

Syntax

__property TsbxDTLSServerTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };

enum TsbxDTLSServerTLSRenegotiationAttackPreventionModes {
  crapmCompatible=0,
  crapmStrict=1,
  crapmAuto=2
};

Default Value

crapmCompatible

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (DTLSServer Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxDTLSServerTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };

enum TsbxDTLSServerTLSRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (DTLSServer Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (DTLSServer Component)

Specifies the TLS mode to use.

Syntax

__property TsbxDTLSServerTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };

enum TsbxDTLSServerTLSTLSModes {
  smDefault=0,
  smNoTLS=1,
  smExplicitTLS=2,
  smImplicitTLS=3,
  smMixedTLS=4
};

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (DTLSServer Component)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (DTLSServer Component)

Enables or disables the TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (DTLSServer Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

WebsiteName Property (DTLSServer Component)

Specifies the web site name to use in the certificate.

Syntax

__property String WebsiteName = { read=FWebsiteName, write=FSetWebsiteName };

Default Value

"SecureBlackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

Data Type

String

BroadcastData Method (DTLSServer Component)

Broadcasts data to all connections.

Syntax

void __fastcall BroadcastData(__int64 ConnectionID, DynamicArray<Byte> Data);

Remarks

Call this method to send Data to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections.

BroadcastText Method (DTLSServer Component)

Broadcasts a text string to all connections.

Syntax

void __fastcall BroadcastText(__int64 ConnectionId, String Text);

Remarks

Call this method to send Text to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections without exceptions.

Config Method (DTLSServer Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (DTLSServer Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

DropClient Method (DTLSServer Component)

Terminates a client connection.

Syntax

void __fastcall DropClient(__int64 ConnectionId, bool Forced);

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

ExportKeyMaterial Method (DTLSServer Component)

Derives key material from the session's master key using the TLS exporters scheme.

Syntax

void __fastcall ExportKeyMaterial(__int64 ConnectionID, String Lbl, DynamicArray<Byte> Context, int Len);

Remarks

Some protocols - for example, SRTP - use the TLS exporters scheme to derive their own session keys from the TLS master key. This method lets you employ exporters to obtain such keys, or to generate secure keys for your own needs from an active TLS session.

The exported keys depend on the master key, and are different for every TLS session. However, a client and server sharing a session will always end up with the same key material, as long as they use the same values of Lbl, Context, and Len.

Use the ConnectionID parameter to specify the session that you would like to derive key material from.

ListClients Method (DTLSServer Component)

Enumerates the connected clients.

Syntax

String __fastcall ListClients();

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

PinClient Method (DTLSServer Component)

Takes a snapshot of the connection's properties.

Syntax

void __fastcall PinClient(__int64 ConnectionId);

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in PinnedClient and PinnedClientChain properties.

ProcessPlainData Method (DTLSServer Component)

Process a plain data buffer to a connection client.

Syntax

void __fastcall ProcessPlainData(__int64 ConnectionID, DynamicArray<Byte> Buffer);

Remarks

Use this method to process a plain data buffer to a connected client. Use ConnectionID to specify the client.

SendData Method (DTLSServer Component)

Sends a data buffer to a connection client.

Syntax

void __fastcall SendData(__int64 ConnectionID, DynamicArray<Byte> Buffer);

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

SendKeepAlive Method (DTLSServer Component)

Sends a keep-alive packet.

Syntax

bool __fastcall SendKeepAlive(__int64 ConnectionId);

Remarks

Use this method to send a keep-alive packet to a client. Keep alive is an empty packet; keep-alive signals sent occasionally can be used to keep connection up.

SendPlainData Method (DTLSServer Component)

Sends a data buffer to a connection client.

Syntax

void __fastcall SendPlainData(__int64 ConnectionID, DynamicArray<Byte> Buffer);

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

SendText Method (DTLSServer Component)

Sends a text string to a client.

Syntax

void __fastcall SendText(__int64 ConnectionId, String Text);

Remarks

Use this method to send a text string to a connected client.

Start Method (DTLSServer Component)

Starts the DTLS server.

Syntax

void __fastcall Start();

Remarks

Use this method to start listening for incoming data.

Stop Method (DTLSServer Component)

Stops the DTLS server.

Syntax

void __fastcall Stop();

Remarks

Call this method to stop listening for incoming data.

Accept Event (DTLSServer Component)

Reports an incoming connection.

Syntax

typedef struct {
  String RemoteAddress;
  int RemotePort;
  bool Accept;
} TsbxDTLSServerAcceptEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerAcceptEvent)(System::TObject* Sender, TsbxDTLSServerAcceptEventParams *e);
__property TsbxDTLSServerAcceptEvent OnAccept = { read=FOnAccept, write=FOnAccept };

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to Connect event to be notified of every connection that has been set up.

Data Event (DTLSServer Component)

Supplies a data chunk received from a client.

Syntax

typedef struct {
  __int64 ConnectionID;
  DynamicArray Buffer;
} TsbxDTLSServerDataEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerDataEvent)(System::TObject* Sender, TsbxDTLSServerDataEventParams *e);
__property TsbxDTLSServerDataEvent OnData = { read=FOnData, write=FOnData };

Remarks

This event is fired to supply another piece of data received from a client. This event may fire multiple times.

Error Event (DTLSServer Component)

Information about errors during data delivery.

Syntax

typedef struct {
  __int64 ConnectionID;
  int ErrorCode;
  String Description;
} TsbxDTLSServerErrorEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerErrorEvent)(System::TObject* Sender, TsbxDTLSServerErrorEventParams *e);
__property TsbxDTLSServerErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

ExternalSign Event (DTLSServer Component)

Handles remote or external signing initiated by the server protocol.

Syntax

typedef struct {
  __int64 ConnectionID;
  String OperationId;
  String HashAlgorithm;
  String Pars;
  String Data;
  String SignedData;
} TsbxDTLSServerExternalSignEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerExternalSignEvent)(System::TObject* Sender, TsbxDTLSServerExternalSignEventParams *e);
__property TsbxDTLSServerExternalSignEvent OnExternalSign = { read=FOnExternalSign, write=FOnExternalSign };

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The component uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (DTLSServer Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxDTLSServerNotificationEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerNotificationEvent)(System::TObject* Sender, TsbxDTLSServerNotificationEventParams *e);
__property TsbxDTLSServerNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

PlainData Event (DTLSServer Component)

Supplies a plain data chunk received from a client.

Syntax

typedef struct {
  __int64 ConnectionID;
  DynamicArray Buffer;
} TsbxDTLSServerPlainDataEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerPlainDataEvent)(System::TObject* Sender, TsbxDTLSServerPlainDataEventParams *e);
__property TsbxDTLSServerPlainDataEvent OnPlainData = { read=FOnPlainData, write=FOnPlainData };

Remarks

This event is fired to supply another piece of plain data received from a client. This event may fire multiple times.

TLSCertValidate Event (DTLSServer Component)

Fires when a client certificate needs to be validated.

Syntax

typedef struct {
  __int64 ConnectionID;
  bool Accept;
} TsbxDTLSServerTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerTLSCertValidateEvent)(System::TObject* Sender, TsbxDTLSServerTLSCertValidateEventParams *e);
__property TsbxDTLSServerTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

The component fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

TLSEstablished Event (DTLSServer Component)

Reports the setup of a TLS session.

Syntax

typedef struct {
  __int64 ConnectionID;
} TsbxDTLSServerTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerTLSEstablishedEvent)(System::TObject* Sender, TsbxDTLSServerTLSEstablishedEventParams *e);
__property TsbxDTLSServerTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

TLSHandshake Event (DTLSServer Component)

Fires when a newly established client connection initiates a TLS handshake.

Syntax

typedef struct {
  __int64 ConnectionID;
  String ServerName;
  bool Abort;
} TsbxDTLSServerTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerTLSHandshakeEvent)(System::TObject* Sender, TsbxDTLSServerTLSHandshakeEventParams *e);
__property TsbxDTLSServerTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

TLSPSK Event (DTLSServer Component)

Requests a pre-shared key for TLS-PSK.

Syntax

typedef struct {
  __int64 ConnectionID;
  String Identity;
  String PSK;
  String Ciphersuite;
} TsbxDTLSServerTLSPSKEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerTLSPSKEvent)(System::TObject* Sender, TsbxDTLSServerTLSPSKEventParams *e);
__property TsbxDTLSServerTLSPSKEvent OnTLSPSK = { read=FOnTLSPSK, write=FOnTLSPSK };

Remarks

The component fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

TLSShutdown Event (DTLSServer Component)

Reports closure of a TLS session.

Syntax

typedef struct {
  __int64 ConnectionID;
} TsbxDTLSServerTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxDTLSServerTLSShutdownEvent)(System::TObject* Sender, TsbxDTLSServerTLSShutdownEventParams *e);
__property TsbxDTLSServerTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

The component fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a Disconnect, which marks the closure of the underlying TCP session.

Config Settings (DTLSServer Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

DTLSServer Config Settings

Base Config Settings

Trappable Errors (DTLSServer Component)

DTLSServer Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)