JAdESVerifier Component

Properties   Methods   Events   Config Settings   Errors  

The JAdESVerifier component verifies signatures over JSON objects.

Syntax

TsbxJAdESVerifier

Remarks

Use JAdESVerifier to validate electronic signatures over JSON structures. Generic (JWS) and JAdES (JSON Advanced Electronic Signatures) are supported.

JAdESVerifier validates each signature from two perspectives: the integrity and validity of the signature itself (i.e. its correspondence to the JSON data it covers), and the validity and trustworthiness of the signing certificate chain. These two signature aspects are generally independent of each other: the signature may be valid but the chain may not be trusted, or, the other way round, the chain may be trusted, but the integrity of the signature may be violated. Under normal circumstances both the signature and the chain must be valid for the signature to be considered good.

To initiate the validation, assign the path to the signed JSON file to the InputFile property (alternatively, you can provide it in a memory buffer via InputBytes or InputString property), and call Verify method. For every signature located in the document, JAdESVerifier will fire the SignatureFound event. This event lets you specify whether you want JAdESVerifier to validate the signature, the chain, or both.

Note: it does not mean that any of the two is optional. This API lets you be flexible in how you validate documents in your code, to allow for a variety of validation scenarios. For example, if your trust environment relies on certificate pinning, validating the chain by JAdESVerifier internally may cause unnecessary burden on the system, in which case (but not in others!) it may be reasonable to disable it in the event handler.

Once SignatureFound returns, JAdESVerifier proceeds to the signature validation routine in accordance with the provided settings. Upon completion of the validation, SignatureValidated event is fired, and the validation results are separately provided via SignatureValidationResult and ChainValidationResult properties of the relevant signature object. Other information about the signature can be accessed via the Signatures property.

Useful settings and properties

The following properties of JAdESVerifier may be handy when working with this component:

• OfflineMode lets you validate the JSON object without contacting online revocation sources. Paired with switched off system trust settings, it can be used to establish the long-term validity of the signed object and the completeness of validation material included in it.
• RevocationCheck lets you adjust the revocation checking preferences.
• ValidatedSigningTime returns the signing time as recorded in the embedded signature timestamp. This is in contrast to ClaimedSigningTime, which returns the signing time as specified by the signer.
• ValidationLog is a great way to find out the details of chain validation failures. This property returns a comprehensive validation log that reports all the issues encountered during the validation.

By default, JAdESVerifier uses the system trust settings to establish certificate chain validity. You can configure it to use your own, custom validation environment by providing the necessary trust elements via KnownCertificates, TrustedCertificates, KnownCRLs, and other similar properties.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AllSignaturesValid Property (JAdESVerifier Component)

The cumulative validity of all signatures.

Syntax

__property bool AllSignaturesValid = { read=FAllSignaturesValid };

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

Data Type

Boolean

AutoValidateSignatures Property (JAdESVerifier Component)

Specifies whether component should validate any present signatures when the JWS/JAdES signature is opened.

Syntax

__property bool AutoValidateSignatures = { read=FAutoValidateSignatures, write=FSetAutoValidateSignatures };

Default Value

true

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.

Data Type

Boolean

BlockedCertCount Property (JAdESVerifier Component)

The number of records in the BlockedCert arrays.

Syntax

__property int BlockedCertCount = { read=FBlockedCertCount, write=FSetBlockedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• BlockedCertBytes
• BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray BlockedCertBytes[int BlockedCertIndex] = { read=FBlockedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 BlockedCertHandle[int BlockedCertIndex] = { read=FBlockedCertHandle, write=FSetBlockedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CertCount Property (JAdESVerifier Component)

The number of records in the Cert arrays.

Syntax

__property int CertCount = { read=FCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CertBytes
• CertCA
• CertCAKeyID
• CertCRLDistributionPoints
• CertCurve
• CertFingerprint
• CertFriendlyName
• CertHandle
• CertHashAlgorithm
• CertIssuer
• CertIssuerRDN
• CertKeyAlgorithm
• CertKeyBits
• CertKeyFingerprint
• CertKeyUsage
• CertKeyValid
• CertOCSPLocations
• CertPolicyIDs
• CertPublicKeyBytes
• CertSelfSigned
• CertSerialNumber
• CertSigAlgorithm
• CertSubject
• CertSubjectKeyID
• CertSubjectRDN
• CertValidFrom
• CertValidTo

The array indices start at 0 and end at CertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray CertBytes[int CertIndex] = { read=FCertBytes };

Remarks

Returns the raw certificate data in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCA Property (JAdESVerifier Component)

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

Syntax

__property bool CertCA[int CertIndex] = { read=FCertCA };

Default Value

false

Remarks

Indicates whether the certificate has a CA capability (a setting in the BasicConstraints extension).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertCAKeyID Property (JAdESVerifier Component)

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

__property DynamicArray CertCAKeyID[int CertIndex] = { read=FCertCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertCRLDistributionPoints Property (JAdESVerifier Component)

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

__property String CertCRLDistributionPoints[int CertIndex] = { read=FCertCRLDistributionPoints };

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertCurve Property (JAdESVerifier Component)

Specifies the elliptic curve of the EC public key.

Syntax

__property String CertCurve[int CertIndex] = { read=FCertCurve };

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertFingerprint Property (JAdESVerifier Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property DynamicArray CertFingerprint[int CertIndex] = { read=FCertFingerprint };

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertFriendlyName Property (JAdESVerifier Component)

Contains an associated alias (friendly name) of the certificate.

Syntax

__property String CertFriendlyName[int CertIndex] = { read=FCertFriendlyName };

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CertHandle[int CertIndex] = { read=FCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Long64

CertHashAlgorithm Property (JAdESVerifier Component)

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

__property String CertHashAlgorithm[int CertIndex] = { read=FCertHashAlgorithm };

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuer Property (JAdESVerifier Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String CertIssuer[int CertIndex] = { read=FCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertIssuerRDN Property (JAdESVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String CertIssuerRDN[int CertIndex] = { read=FCertIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyAlgorithm Property (JAdESVerifier Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String CertKeyAlgorithm[int CertIndex] = { read=FCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertKeyBits Property (JAdESVerifier Component)

Returns the length of the public key.

Syntax

__property int CertKeyBits[int CertIndex] = { read=FCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyFingerprint Property (JAdESVerifier Component)

Returns a fingerprint of the public key contained in the certificate.

Syntax

__property DynamicArray CertKeyFingerprint[int CertIndex] = { read=FCertKeyFingerprint };

Remarks

Returns a fingerprint of the public key contained in the certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertKeyUsage Property (JAdESVerifier Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int CertKeyUsage[int CertIndex] = { read=FCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Integer

CertKeyValid Property (JAdESVerifier Component)

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

__property bool CertKeyValid[int CertIndex] = { read=FCertKeyValid };

Default Value

false

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertOCSPLocations Property (JAdESVerifier Component)

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

__property String CertOCSPLocations[int CertIndex] = { read=FCertOCSPLocations };

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPolicyIDs Property (JAdESVerifier Component)

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

__property String CertPolicyIDs[int CertIndex] = { read=FCertPolicyIDs };

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertPublicKeyBytes Property (JAdESVerifier Component)

Contains the certificate's public key in DER format.

Syntax

__property DynamicArray CertPublicKeyBytes[int CertIndex] = { read=FCertPublicKeyBytes };

Remarks

Contains the certificate's public key in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSelfSigned Property (JAdESVerifier Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool CertSelfSigned[int CertIndex] = { read=FCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

CertSerialNumber Property (JAdESVerifier Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray CertSerialNumber[int CertIndex] = { read=FCertSerialNumber };

Remarks

Returns the certificate's serial number.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSigAlgorithm Property (JAdESVerifier Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String CertSigAlgorithm[int CertIndex] = { read=FCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubject Property (JAdESVerifier Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String CertSubject[int CertIndex] = { read=FCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertSubjectKeyID Property (JAdESVerifier Component)

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

__property DynamicArray CertSubjectKeyID[int CertIndex] = { read=FCertSubjectKeyID };

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertSubjectRDN Property (JAdESVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String CertSubjectRDN[int CertIndex] = { read=FCertSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidFrom Property (JAdESVerifier Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String CertValidFrom[int CertIndex] = { read=FCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CertValidTo Property (JAdESVerifier Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String CertValidTo[int CertIndex] = { read=FCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

String

CompactForm Property (JAdESVerifier Component)

Specifies if the JWS compact serialization to be used.

Syntax

__property bool CompactForm = { read=FCompactForm, write=FSetCompactForm };

Default Value

false

Remarks

When this property is set to "true" value, the JAdES component will use the JWS compact serialization format when saving a signature.

The JWS compact serialization format is a compact, Url safe representation of a JWS (JSON Web Signature) or JWE (JSON Web Encryption) object, used for transmitting security tokens.

The JWS compact serialization format supports only one signature without unprotected header (only JWS or JAdES BaselineB signature).

Data Type

Boolean

ContentType Property (JAdESVerifier Component)

Specifies payload content type.

Syntax

__property String ContentType = { read=FContentType };

Default Value

""

Remarks

Use this property to read the content type of the payload.

This property is read-only and not available at design time.

Data Type

String

CRLCount Property (JAdESVerifier Component)

The number of records in the CRL arrays.

Syntax

__property int CRLCount = { read=FCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CRLBytes
• CRLHandle
• CRLIssuer
• CRLIssuerRDN
• CRLLocation
• CRLNextUpdate
• CRLThisUpdate

The array indices start at 0 and end at CRLCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CRLBytes Property (JAdESVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray CRLBytes[int CRLIndex] = { read=FCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CRLHandle[int CRLIndex] = { read=FCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Long64

CRLIssuer Property (JAdESVerifier Component)

The common name of the CRL issuer (CA), typically a company name.

Syntax

__property String CRLIssuer[int CRLIndex] = { read=FCRLIssuer };

Default Value

""

Remarks

The common name of the CRL issuer (CA), typically a company name.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLIssuerRDN Property (JAdESVerifier Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Syntax

__property String CRLIssuerRDN[int CRLIndex] = { read=FCRLIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLLocation Property (JAdESVerifier Component)

The URL that the CRL was downloaded from.

Syntax

__property String CRLLocation[int CRLIndex] = { read=FCRLLocation };

Default Value

""

Remarks

The URL that the CRL was downloaded from.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLNextUpdate Property (JAdESVerifier Component)

The planned time and date of the next version of this CRL to be published.

Syntax

__property String CRLNextUpdate[int CRLIndex] = { read=FCRLNextUpdate };

Default Value

""

Remarks

The planned time and date of the next version of this CRL to be published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLThisUpdate Property (JAdESVerifier Component)

The date and time at which this version of the CRL was published.

Syntax

__property String CRLThisUpdate[int CRLIndex] = { read=FCRLThisUpdate };

Default Value

""

Remarks

The date and time at which this version of the CRL was published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

DataBytes Property (JAdESVerifier Component)

Use this property to pass a payload or an object data to component in the byte array form.

Syntax

__property DynamicArray DataBytes = { read=FDataBytes, write=FSetDataBytes };

Remarks

Assign a byte array containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

DataFile Property (JAdESVerifier Component)

A path to a file containing a payload or an object data.

Syntax

__property String DataFile = { read=FDataFile, write=FSetDataFile };

Default Value

""

Remarks

Use this property to provide a JWS payload or an object data to be processed.

Data Type

String

DataString Property (JAdESVerifier Component)

Use this property to pass a payload or an object data to component in the string form.

Syntax

__property String DataString = { read=FDataString, write=FSetDataString };

Default Value

""

Remarks

Assign a string containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

Data Type

String

Detached Property (JAdESVerifier Component)

Specifies whether a detached signature should be produced or verified.

Syntax

__property bool Detached = { read=FDetached, write=FSetDetached };

Default Value

false

Remarks

Use this property to specify whether a detached signature should be produced or verified.

When this property is set to "true" value, the JWS payload will be detached from the signature and may either be a single detached object or the result of concatenating multiple detached data objects. In other words, the JWS payload and the signature are stored in separate objects.

If this property is set to "true" value, the user must provide the detached content via the DataFile or DataStream or DataBytes or DataString properties.

When Detached is set to "false" value, the JWS payload is included with the signature as a single object.

Data Type

Boolean

ExtractPayload Property (JAdESVerifier Component)

Specifies whether a payload should be extracted.

Syntax

__property bool ExtractPayload = { read=FExtractPayload, write=FSetExtractPayload };

Default Value

false

Remarks

Use this property to specify whether a payload should be extracted when signature loaded. This applies only to non-detached signatures with a payload.

When this property is set to "true" value, the JWS payload will be extracted from the signature.

The user must provide the OutputFile or OutputStream properties with a filename or stream where to save the payload, if none is provided then payload is returned via OutputBytes or OutputString properties.

Data Type

Boolean

FIPSMode Property (JAdESVerifier Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

FlattenedSignature Property (JAdESVerifier Component)

Specifies if the flattened signature to be used.

Syntax

__property bool FlattenedSignature = { read=FFlattenedSignature, write=FSetFlattenedSignature };

Default Value

true

Remarks

This property determines whether to use the flattened JWS JSON serialization format. This format is optimized for the single digital signature case and flattens the general JWS JSON serialization syntax by removing the "signatures" member and instead placing the "protected", "header", and "signature" members at the top-level JSON object (at the same level as the "payload" member).

When the FlattenedSignature property is set to "true" value, the signature will be represented using the flattened JWS JSON serialization format, but it is only applicable when there is a single signature involved.

When the property is set to "false" value, the signature will be represented using the general JWS JSON serialization format.

Data Type

Boolean

IgnoreChainValidationErrors Property (JAdESVerifier Component)

Makes the component tolerant to chain validation errors.

Syntax

__property bool IgnoreChainValidationErrors = { read=FIgnoreChainValidationErrors, write=FSetIgnoreChainValidationErrors };

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (JAdESVerifier Component)

Use this property to pass the input to component in byte array form.

Syntax

__property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes };

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (JAdESVerifier Component)

The file to be signed.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

Provide the path to the JSON to be signed.

Data Type

String

InputString Property (JAdESVerifier Component)

Use this property to pass the input to component in the string form.

Syntax

__property String InputString = { read=FInputString, write=FSetInputString };

Default Value

""

Remarks

Assign a string containing the data to be processed to this property.

This property is not available at design time.

Data Type

String

KnownCertCount Property (JAdESVerifier Component)

The number of records in the KnownCert arrays.

Syntax

__property int KnownCertCount = { read=FKnownCertCount, write=FSetKnownCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCertBytes
• KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray KnownCertBytes[int KnownCertIndex] = { read=FKnownCertBytes };

Remarks

Returns the raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCertHandle[int KnownCertIndex] = { read=FKnownCertHandle, write=FSetKnownCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (JAdESVerifier Component)

The number of records in the KnownCRL arrays.

Syntax

__property int KnownCRLCount = { read=FKnownCRLCount, write=FSetKnownCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCRLBytes
• KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (JAdESVerifier Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray KnownCRLBytes[int KnownCRLIndex] = { read=FKnownCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCRLHandle[int KnownCRLIndex] = { read=FKnownCRLHandle, write=FSetKnownCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (JAdESVerifier Component)

The number of records in the KnownOCSP arrays.

Syntax

__property int KnownOCSPCount = { read=FKnownOCSPCount, write=FSetKnownOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownOCSPBytes
• KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (JAdESVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray KnownOCSPBytes[int KnownOCSPIndex] = { read=FKnownOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownOCSPHandle[int KnownOCSPIndex] = { read=FKnownOCSPHandle, write=FSetKnownOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

OCSPCount Property (JAdESVerifier Component)

The number of records in the OCSP arrays.

Syntax

__property int OCSPCount = { read=FOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OCSPBytes
• OCSPHandle
• OCSPIssuer
• OCSPIssuerRDN
• OCSPLocation
• OCSPProducedAt

The array indices start at 0 and end at OCSPCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OCSPBytes Property (JAdESVerifier Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray OCSPBytes[int OCSPIndex] = { read=FOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OCSPHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 OCSPHandle[int OCSPIndex] = { read=FOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Long64

OCSPIssuer Property (JAdESVerifier Component)

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuer[int OCSPIndex] = { read=FOCSPIssuer };

Default Value

""

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPIssuerRDN Property (JAdESVerifier Component)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuerRDN[int OCSPIndex] = { read=FOCSPIssuerRDN };

Default Value

""

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPLocation Property (JAdESVerifier Component)

The location of the OCSP responder.

Syntax

__property String OCSPLocation[int OCSPIndex] = { read=FOCSPLocation };

Default Value

""

Remarks

The location of the OCSP responder.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPProducedAt Property (JAdESVerifier Component)

Specifies the time when the response was produced, in UTC.

Syntax

__property String OCSPProducedAt[int OCSPIndex] = { read=FOCSPProducedAt };

Default Value

""

Remarks

Specifies the time when the response was produced, in UTC.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OfflineMode Property (JAdESVerifier Component)

Switches the component to offline mode.

Syntax

__property bool OfflineMode = { read=FOfflineMode, write=FSetOfflineMode };

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

OutputBytes Property (JAdESVerifier Component)

Use this property to read the output the component object has produced.

Syntax

__property DynamicArray OutputBytes = { read=FOutputBytes };

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (JAdESVerifier Component)

Defines where to save the signature.

Syntax

__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };

Default Value

""

Remarks

Specifies the path where the JWS/JAdES signature should be saved.

Data Type

String

OutputString Property (JAdESVerifier Component)

Use this property to read the output the component object has produced.

Syntax

__property String OutputString = { read=FOutputString };

Default Value

""

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

String

Profile Property (JAdESVerifier Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

__property String Profile = { read=FProfile, write=FSetProfile };

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Data Type

String

ProxyAddress Property (JAdESVerifier Component)

The IP address of the proxy server.

Syntax

__property String ProxyAddress = { read=FProxyAddress, write=FSetProxyAddress };

Default Value

""

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (JAdESVerifier Component)

The authentication type used by the proxy server.

Syntax

__property TsbxJAdESVerifierProxyAuthentications ProxyAuthentication = { read=FProxyAuthentication, write=FSetProxyAuthentication };

enum TsbxJAdESVerifierProxyAuthentications {
  patNoAuthentication=0,
  patBasic=1,
  patDigest=2,
  patNTLM=3
};

Default Value

patNoAuthentication

Remarks

The authentication type used by the proxy server.

Data Type

Integer

ProxyPassword Property (JAdESVerifier Component)

The password to authenticate to the proxy server.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (JAdESVerifier Component)

The port on the proxy server to connect to.

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (JAdESVerifier Component)

The type of the proxy server.

Syntax

__property TsbxJAdESVerifierProxyProxyTypes ProxyProxyType = { read=FProxyProxyType, write=FSetProxyProxyType };

enum TsbxJAdESVerifierProxyProxyTypes {
  cptNone=0,
  cptSocks4=1,
  cptSocks5=2,
  cptWebTunnel=3,
  cptHTTP=4
};

Default Value

cptNone

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

Data Type

Integer

ProxyRequestHeaders Property (JAdESVerifier Component)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

__property String ProxyRequestHeaders = { read=FProxyRequestHeaders, write=FSetProxyRequestHeaders };

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (JAdESVerifier Component)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

__property String ProxyResponseBody = { read=FProxyResponseBody, write=FSetProxyResponseBody };

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (JAdESVerifier Component)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

__property String ProxyResponseHeaders = { read=FProxyResponseHeaders, write=FSetProxyResponseHeaders };

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (JAdESVerifier Component)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

__property bool ProxyUseIPv6 = { read=FProxyUseIPv6, write=FSetProxyUseIPv6 };

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUseProxy Property (JAdESVerifier Component)

Enables or disables proxy-driven connection.

Syntax

__property bool ProxyUseProxy = { read=FProxyUseProxy, write=FSetProxyUseProxy };

Default Value

false

Remarks

Enables or disables proxy-driven connection.

Data Type

Boolean

ProxyUsername Property (JAdESVerifier Component)

Specifies the username credential for proxy authentication.

Syntax

__property String ProxyUsername = { read=FProxyUsername, write=FSetProxyUsername };

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

RevocationCheck Property (JAdESVerifier Component)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

__property TsbxJAdESVerifierRevocationChecks RevocationCheck = { read=FRevocationCheck, write=FSetRevocationCheck };

enum TsbxJAdESVerifierRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SignatureCount Property (JAdESVerifier Component)

The number of records in the Signature arrays.

Syntax

__property int SignatureCount = { read=FSignatureCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignatureCertificateIndex
• SignatureChainValidationDetails
• SignatureChainValidationResult
• SignatureClaimedSigningTime
• SignatureContentType
• SignatureCountersigned
• SignatureHandle
• SignatureHashAlgorithm
• SignatureIssuerRDN
• SignatureJAdESVersion
• SignatureLastArchivalTime
• SignatureLevel
• SignatureObjectType
• SignatureParentSignatureIndex
• SignaturePolicyHash
• SignaturePolicyHashAlgorithm
• SignaturePolicyID
• SignaturePolicyURI
• SignatureSerialNumber
• SignatureSignatureBytes
• SignatureSignatureValidationResult
• SignatureSignedData
• SignatureSignedDataType
• SignatureSubjectKeyID
• SignatureSubjectRDN
• SignatureTimestamped
• SignatureValidatedSigningTime
• SignatureValidationLog

The array indices start at 0 and end at SignatureCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignatureCertificateIndex Property (JAdESVerifier Component)

Returns the index of the signing certificate in the Certificates collection Use this property to look up the signing certificate in the Certificates collection.

Syntax

__property int SignatureCertificateIndex[int SignatureIndex] = { read=FSignatureCertificateIndex };

Default Value

-1

Remarks

Returns the index of the signing certificate in the Certificates collection

Use this property to look up the signing certificate in the Certificates collection.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationDetails Property (JAdESVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int SignatureChainValidationDetails[int SignatureIndex] = { read=FSignatureChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationResult Property (JAdESVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxJAdESVerifierSignatureChainValidationResults SignatureChainValidationResult[int SignatureIndex] = { read=FSignatureChainValidationResult };

enum TsbxJAdESVerifierSignatureChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureClaimedSigningTime Property (JAdESVerifier Component)

The signing time from the signer's computer.

Syntax

__property String SignatureClaimedSigningTime[int SignatureIndex] = { read=FSignatureClaimedSigningTime };

Default Value

""

Remarks

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureContentType Property (JAdESVerifier Component)

Specifies payload content type.

Syntax

__property String SignatureContentType[int SignatureIndex] = { read=FSignatureContentType };

Default Value

""

Remarks

Specifies payload content type.

Use this property to indicate the content type of the JWS Payload.

This property provides a way for the application to disambiguate among different kinds of objects that might be present in the payload, but it is typically not used when the kind of object is already known. The value of this property is a string that conforms to the Internet Media Type (MIME) format, such as "text/plain" or "application/json".

It is optional to use this property and it is recommended to omit the "application/" prefix of the media type value when it is not needed. The recipient of the signed message should treat the value as if "application/" were prepended to it, unless it already contains a '/'.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureCountersigned Property (JAdESVerifier Component)

Indicates if the signature is countersigned.

Syntax

__property bool SignatureCountersigned[int SignatureIndex] = { read=FSignatureCountersigned };

Default Value

false

Remarks

Indicates if the signature is countersigned.

Use this property to find out whether the JWS/JAdES signature contains any countersignatures over the main signature(s).

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SignatureHandle[int SignatureIndex] = { read=FSignatureHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Long64

SignatureHashAlgorithm Property (JAdESVerifier Component)

Specifies the hash algorithm to be used.

Syntax

__property String SignatureHashAlgorithm[int SignatureIndex] = { read=FSignatureHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the hash algorithm to be used.

Supported values:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureIssuerRDN Property (JAdESVerifier Component)

The Relative Distinguished Name of the signing certificate's issuer.

Syntax

__property String SignatureIssuerRDN[int SignatureIndex] = { read=FSignatureIssuerRDN };

Default Value

""

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureJAdESVersion Property (JAdESVerifier Component)

Specifies JAdES version.

Syntax

__property TsbxJAdESVerifierSignatureJAdESVersions SignatureJAdESVersion[int SignatureIndex] = { read=FSignatureJAdESVersion };

enum TsbxJAdESVerifierSignatureJAdESVersions {
  javUnknown=0,
  jav111=1
};

Default Value

jav111

Remarks

Specifies JAdES version.

This property specifies the version of the JAdES specification the signature should comply with.

The supported values are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureLastArchivalTime Property (JAdESVerifier Component)

Indicates the most recent archival time of an archived signature This property returns the time of the most recent archival timestamp applied to the signature.

Syntax

__property String SignatureLastArchivalTime[int SignatureIndex] = { read=FSignatureLastArchivalTime };

Default Value

""

Remarks

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureLevel Property (JAdESVerifier Component)

Specifies the signature kind and level.

Syntax

__property TsbxJAdESVerifierSignatureLevels SignatureLevel[int SignatureIndex] = { read=FSignatureLevel };

enum TsbxJAdESVerifierSignatureLevels {
  jaslJWS=0,
  jaslBaselineB=1,
  jaslBaselineT=2,
  jaslBaselineLT=3,
  jaslBaselineLTA=4
};

Default Value

jaslBaselineB

Remarks

Specifies the signature kind and level.

The supported values are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureObjectType Property (JAdESVerifier Component)

Specifies signature object content type.

Syntax

__property String SignatureObjectType[int SignatureIndex] = { read=FSignatureObjectType };

Default Value

"jose+json"

Remarks

Specifies signature object content type.

Use this property to specify the content type of the signature object.

It is used by the application to differentiate between different types of objects that might be present in an application data structure containing a JWS or JAdES.

The default value is "jose+json" which indicates that it is a JWS or JAdES using the JWS JSON Serialization, and "jose" which indicates that the object is a JWS or JAdES using the JWS Compact Serialization. Other type values can also be used by the application.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureParentSignatureIndex Property (JAdESVerifier Component)

Returns the index of the parent signature, if applicable.

Syntax

__property int SignatureParentSignatureIndex[int SignatureIndex] = { read=FSignatureParentSignatureIndex };

Default Value

-1

Remarks

Returns the index of the parent signature, if applicable.

Use this property to establish the index of the associated parent signature object in the signature collection.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignaturePolicyHash Property (JAdESVerifier Component)

The signature policy hash value.

Syntax

__property String SignaturePolicyHash[int SignatureIndex] = { read=FSignaturePolicyHash };

Default Value

""

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHashAlgorithm Property (JAdESVerifier Component)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Syntax

__property String SignaturePolicyHashAlgorithm[int SignatureIndex] = { read=FSignaturePolicyHashAlgorithm };

Default Value

""

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from SignaturePolicyHash.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyID Property (JAdESVerifier Component)

The policy ID that was included or to be included into the signature.

Syntax

__property String SignaturePolicyID[int SignatureIndex] = { read=FSignaturePolicyID };

Default Value

""

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyURI Property (JAdESVerifier Component)

The signature policy URI that was included in the signature.

Syntax

__property String SignaturePolicyURI[int SignatureIndex] = { read=FSignaturePolicyURI };

Default Value

""

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSerialNumber Property (JAdESVerifier Component)

The serial number of the timestamp.

Syntax

__property DynamicArray SignatureSerialNumber[int SignatureIndex] = { read=FSignatureSerialNumber };

Remarks

The serial number of the timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureBytes Property (JAdESVerifier Component)

Returns the binary representation of the JSON/JAdES signature.

Syntax

__property DynamicArray SignatureSignatureBytes[int SignatureIndex] = { read=FSignatureSignatureBytes };

Remarks

Returns the binary representation of the JSON/JAdES signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureValidationResult Property (JAdESVerifier Component)

The outcome of the cryptographic signature validation.

Syntax

__property TsbxJAdESVerifierSignatureSignatureValidationResults SignatureSignatureValidationResult[int SignatureIndex] = { read=FSignatureSignatureValidationResult };

enum TsbxJAdESVerifierSignatureSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSignedData Property (JAdESVerifier Component)

The sigD header parameter in JSON format that was included or to be included into the signature.

Syntax

__property String SignatureSignedData[int SignatureIndex] = { read=FSignatureSignedData };

Default Value

""

Remarks

The sigD header parameter in JSON format that was included or to be included into the signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSignedDataType Property (JAdESVerifier Component)

Specifies the type of signed data.

Syntax

__property TsbxJAdESVerifierSignatureSignedDataTypes SignatureSignedDataType[int SignatureIndex] = { read=FSignatureSignedDataType };

enum TsbxJAdESVerifierSignatureSignedDataTypes {
  jasdtPayload=0,
  jasdtHttpHeaders=1,
  jasdtObjectIdByURI=2,
  jasdtObjectIdByURIHash=3,
  jasdtCustom=4
};

Default Value

jasdtPayload

Remarks

Specifies the type of signed data.

Supported values:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSubjectKeyID Property (JAdESVerifier Component)

Contains the subject key identifier of the signing certificate.

Syntax

__property DynamicArray SignatureSubjectKeyID[int SignatureIndex] = { read=FSignatureSubjectKeyID };

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSubjectRDN Property (JAdESVerifier Component)

Contains information about the person owning the signing certificate.

Syntax

__property String SignatureSubjectRDN[int SignatureIndex] = { read=FSignatureSubjectRDN };

Default Value

""

Remarks

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureTimestamped Property (JAdESVerifier Component)

Use this property to establish whether the signature contains an embedded timestamp.

Syntax

__property bool SignatureTimestamped[int SignatureIndex] = { read=FSignatureTimestamped };

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureValidatedSigningTime Property (JAdESVerifier Component)

Contains the certified signing time.

Syntax

__property String SignatureValidatedSigningTime[int SignatureIndex] = { read=FSignatureValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SignatureClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationLog Property (JAdESVerifier Component)

Contains the complete log of the certificate validation routine.

Syntax

__property String SignatureValidationLog[int SignatureIndex] = { read=FSignatureValidationLog };

Default Value

""

Remarks

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SocketDNSMode Property (JAdESVerifier Component)

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Syntax

__property TsbxJAdESVerifierSocketDNSModes SocketDNSMode = { read=FSocketDNSMode, write=FSetSocketDNSMode };

enum TsbxJAdESVerifierSocketDNSModes {
  dmAuto=0,
  dmPlatform=1,
  dmOwn=2,
  dmOwnSecure=3
};

Default Value

dmAuto

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Data Type

Integer

SocketDNSPort Property (JAdESVerifier Component)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

__property int SocketDNSPort = { read=FSocketDNSPort, write=FSetSocketDNSPort };

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (JAdESVerifier Component)

The timeout (in milliseconds) for each DNS query.

Syntax

__property int SocketDNSQueryTimeout = { read=FSocketDNSQueryTimeout, write=FSetSocketDNSQueryTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (JAdESVerifier Component)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

__property String SocketDNSServers = { read=FSocketDNSServers, write=FSetSocketDNSServers };

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (JAdESVerifier Component)

The timeout (in milliseconds) for the whole resolution process.

Syntax

__property int SocketDNSTotalTimeout = { read=FSocketDNSTotalTimeout, write=FSetSocketDNSTotalTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (JAdESVerifier Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (JAdESVerifier Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (JAdESVerifier Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (JAdESVerifier Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (JAdESVerifier Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (JAdESVerifier Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TimestampCount Property (JAdESVerifier Component)

The number of records in the Timestamp arrays.

Syntax

__property int TimestampCount = { read=FTimestampCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TimestampAccuracy
• TimestampBytes
• TimestampCertificateIndex
• TimestampChainValidationDetails
• TimestampChainValidationResult
• TimestampHashAlgorithm
• TimestampSerialNumber
• TimestampSignatureIndex
• TimestampTime
• TimestampTimestampType
• TimestampTSAName
• TimestampValidationLog
• TimestampValidationResult

The array indices start at 0 and end at TimestampCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TimestampAccuracy Property (JAdESVerifier Component)

This property indicates the accuracy of the included time mark, in microseconds.

Syntax

__property __int64 TimestampAccuracy[int TimestampIndex] = { read=FTimestampAccuracy };

Default Value

0

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Long64

TimestampBytes Property (JAdESVerifier Component)

Returns the raw timestamp data in DER format.

Syntax

__property DynamicArray TimestampBytes[int TimestampIndex] = { read=FTimestampBytes };

Remarks

Returns the raw timestamp data in DER format.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampCertificateIndex Property (JAdESVerifier Component)

Returns the index of the TSA certificate in the Certificates collection.

Syntax

__property int TimestampCertificateIndex[int TimestampIndex] = { read=FTimestampCertificateIndex };

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationDetails Property (JAdESVerifier Component)

The details of a certificate chain validation outcome.

Syntax

__property int TimestampChainValidationDetails[int TimestampIndex] = { read=FTimestampChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationResult Property (JAdESVerifier Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxJAdESVerifierTimestampChainValidationResults TimestampChainValidationResult[int TimestampIndex] = { read=FTimestampChainValidationResult };

enum TsbxJAdESVerifierTimestampChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampHashAlgorithm Property (JAdESVerifier Component)

Returns the timestamp's hash algorithm.

Syntax

__property String TimestampHashAlgorithm[int TimestampIndex] = { read=FTimestampHashAlgorithm };

Default Value

""

Remarks

Returns the timestamp's hash algorithm.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampSerialNumber Property (JAdESVerifier Component)

Returns the timestamp's serial number.

Syntax

__property DynamicArray TimestampSerialNumber[int TimestampIndex] = { read=FTimestampSerialNumber };

Remarks

Returns the timestamp's serial number.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampSignatureIndex Property (JAdESVerifier Component)

Returns the index of the owner signature, if applicable.

Syntax

__property int TimestampSignatureIndex[int TimestampIndex] = { read=FTimestampSignatureIndex };

Default Value

-1

Remarks

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTime Property (JAdESVerifier Component)

The time point incorporated into the timestamp.

Syntax

__property String TimestampTime[int TimestampIndex] = { read=FTimestampTime };

Default Value

""

Remarks

The time point incorporated into the timestamp.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampTimestampType Property (JAdESVerifier Component)

Returns the type of the timestamp.

Syntax

__property int TimestampTimestampType[int TimestampIndex] = { read=FTimestampTimestampType };

Default Value

0

Remarks

Returns the type of the timestamp.

Available options:

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTSAName Property (JAdESVerifier Component)

This value uniquely identifies the Timestamp Authority (TSA).

Syntax

__property String TimestampTSAName[int TimestampIndex] = { read=FTimestampTSAName };

Default Value

""

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationLog Property (JAdESVerifier Component)

Contains the TSA certificate chain validation log.

Syntax

__property String TimestampValidationLog[int TimestampIndex] = { read=FTimestampValidationLog };

Default Value

""

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationResult Property (JAdESVerifier Component)

Contains the timestamp validation outcome.

Syntax

__property TsbxJAdESVerifierTimestampValidationResults TimestampValidationResult[int TimestampIndex] = { read=FTimestampValidationResult };

enum TsbxJAdESVerifierTimestampValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4
};

Default Value

svtValid

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TLSClientCertCount Property (JAdESVerifier Component)

The number of records in the TLSClientCert arrays.

Syntax

__property int TLSClientCertCount = { read=FTLSClientCertCount, write=FSetTLSClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSClientCertBytes
• TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSClientCertBytes[int TLSClientCertIndex] = { read=FTLSClientCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSClientCertHandle[int TLSClientCertIndex] = { read=FTLSClientCertHandle, write=FSetTLSClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (JAdESVerifier Component)

The number of records in the TLSServerCert arrays.

Syntax

__property int TLSServerCertCount = { read=FTLSServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSServerCertBytes
• TLSServerCertHandle

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSServerCertBytes[int TLSServerCertIndex] = { read=FTLSServerCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSServerCertHandle[int TLSServerCertIndex] = { read=FTLSServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSAutoValidateCertificates Property (JAdESVerifier Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (JAdESVerifier Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxJAdESVerifierTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };

enum TsbxJAdESVerifierTLSBaseConfigurations {
  stpcDefault=0,
  stpcCompatible=1,
  stpcComprehensiveInsecure=2,
  stpcHighlySecure=3
};

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (JAdESVerifier Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSECCurves Property (JAdESVerifier Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (JAdESVerifier Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (JAdESVerifier Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (JAdESVerifier Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (JAdESVerifier Component)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (JAdESVerifier Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (JAdESVerifier Component)

Selects the renegotiation attack prevention mechanism.

Syntax

__property TsbxJAdESVerifierTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };

enum TsbxJAdESVerifierTLSRenegotiationAttackPreventionModes {
  crapmCompatible=0,
  crapmStrict=1,
  crapmAuto=2
};

Default Value

crapmCompatible

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (JAdESVerifier Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxJAdESVerifierTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };

enum TsbxJAdESVerifierTLSRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (JAdESVerifier Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (JAdESVerifier Component)

Specifies the TLS mode to use.

Syntax

__property TsbxJAdESVerifierTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };

enum TsbxJAdESVerifierTLSTLSModes {
  smDefault=0,
  smNoTLS=1,
  smExplicitTLS=2,
  smImplicitTLS=3,
  smMixedTLS=4
};

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (JAdESVerifier Component)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (JAdESVerifier Component)

Enables or disables the TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (JAdESVerifier Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

TrustedCertCount Property (JAdESVerifier Component)

The number of records in the TrustedCert arrays.

Syntax

__property int TrustedCertCount = { read=FTrustedCertCount, write=FSetTrustedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TrustedCertBytes
• TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (JAdESVerifier Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TrustedCertBytes[int TrustedCertIndex] = { read=FTrustedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (JAdESVerifier Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TrustedCertHandle[int TrustedCertIndex] = { read=FTrustedCertHandle, write=FSetTrustedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

ValidationMoment Property (JAdESVerifier Component)

The time point at which signature validity is to be established.

Syntax

__property String ValidationMoment = { read=FValidationMoment, write=FSetValidationMoment };

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

Close Method (JAdESVerifier Component)

Closes an opened JWS/JAdES signature.

Syntax

void __fastcall Close(bool SaveChanges);

Remarks

Use this method to close a previously opened JWS/JAdES signature. Set SaveChanges to true to apply any changes made.

Config Method (JAdESVerifier Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (JAdESVerifier Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Open Method (JAdESVerifier Component)

Opens a JSON for verifying or removing signatures.

Syntax

void __fastcall Open();

Remarks

Use this method to open a JSON for verifying or removing signatures. When finished, call Close to complete or discard the operation.

Revalidate Method (JAdESVerifier Component)

Revalidates a signature in accordance with current settings.

Syntax

void __fastcall Revalidate(int SigIndex);

Remarks

Use this method to re-validate a signature in the opened JWS/JAdES signature.

Unsign Method (JAdESVerifier Component)

Deletes a signature from the JWS/JAdES signature.

Syntax

void __fastcall Unsign(int SigIndex);

Remarks

Use this method to delete an existing signature from the JWS/JAdES signature. Use SigIndex parameter to specify the signature to be removed.

Verify Method (JAdESVerifier Component)

Verifies the JWS/JAdES signature.

Syntax

void __fastcall Verify();

Remarks

Use this method to verify the JWS/JAdES signature.

ChainElementDownload Event (JAdESVerifier Component)

Fires when there is a need to download a chain element from an online source.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
  String Location;
  int Action;
} TsbxJAdESVerifierChainElementDownloadEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierChainElementDownloadEvent)(System::TObject* Sender, TsbxJAdESVerifierChainElementDownloadEventParams *e);
__property TsbxJAdESVerifierChainElementDownloadEvent OnChainElementDownload = { read=FOnChainElementDownload, write=FOnChainElementDownload };

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (JAdESVerifier Component)

Fires when an element required to validate the chain was not located.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
} TsbxJAdESVerifierChainElementNeededEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierChainElementNeededEvent)(System::TObject* Sender, TsbxJAdESVerifierChainElementNeededEventParams *e);
__property TsbxJAdESVerifierChainElementNeededEvent OnChainElementNeeded = { read=FOnChainElementNeeded, write=FOnChainElementNeeded };

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (JAdESVerifier Component)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

typedef struct {
  int Kind;
  DynamicArray Body;
  String URI;
} TsbxJAdESVerifierChainElementStoreEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierChainElementStoreEvent)(System::TObject* Sender, TsbxJAdESVerifierChainElementStoreEventParams *e);
__property TsbxJAdESVerifierChainElementStoreEvent OnChainElementStore = { read=FOnChainElementStore, write=FOnChainElementStore };

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (JAdESVerifier Component)

Reports the completion of a certificate chain validation.

Syntax

typedef struct {
  int Index;
  String SubjectRDN;
  int ValidationResult;
  int ValidationDetails;
} TsbxJAdESVerifierChainValidatedEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierChainValidatedEvent)(System::TObject* Sender, TsbxJAdESVerifierChainValidatedEventParams *e);
__property TsbxJAdESVerifierChainValidatedEvent OnChainValidated = { read=FOnChainValidated, write=FOnChainValidated };

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

ChainValidationProgress Event (JAdESVerifier Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

typedef struct {
  String EventKind;
  String CertRDN;
  String CACertRDN;
  int Action;
} TsbxJAdESVerifierChainValidationProgressEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierChainValidationProgressEvent)(System::TObject* Sender, TsbxJAdESVerifierChainValidationProgressEventParams *e);
__property TsbxJAdESVerifierChainValidationProgressEvent OnChainValidationProgress = { read=FOnChainValidationProgress, write=FOnChainValidationProgress };

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

Error Event (JAdESVerifier Component)

Information about errors during signing.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxJAdESVerifierErrorEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierErrorEvent)(System::TObject* Sender, TsbxJAdESVerifierErrorEventParams *e);
__property TsbxJAdESVerifierErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

This event is fired in case of exceptional conditions during the JSON processing.

ErrorCode contains an error code and Description contains a textual description of the error.

HTTPHeaderFieldNeeded Event (JAdESVerifier Component)

This event is fired when HTTP header field value is required.

Syntax

typedef struct {
  String FieldName;
  String FieldValues;
} TsbxJAdESVerifierHTTPHeaderFieldNeededEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierHTTPHeaderFieldNeededEvent)(System::TObject* Sender, TsbxJAdESVerifierHTTPHeaderFieldNeededEventParams *e);
__property TsbxJAdESVerifierHTTPHeaderFieldNeededEvent OnHTTPHeaderFieldNeeded = { read=FOnHTTPHeaderFieldNeeded, write=FOnHTTPHeaderFieldNeeded };

Remarks

This event is triggered when the type of signed data is HttpHeaders mechanism (jasdtHttpHeaders). It indicates that a HTTP header field value is needed.

For "(request target)" field name value return request method and target URI seperated by space character. For example: "GET https://nsoftware.com/sbb/"

Loaded Event (JAdESVerifier Component)

This event is fired when the JSON has been loaded into memory.

Syntax

typedef struct {
  bool Cancel;
} TsbxJAdESVerifierLoadedEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierLoadedEvent)(System::TObject* Sender, TsbxJAdESVerifierLoadedEventParams *e);
__property TsbxJAdESVerifierLoadedEvent OnLoaded = { read=FOnLoaded, write=FOnLoaded };

Remarks

The handler for this event is a good place to check JWS/JAdES signature properties, which may be useful when preparing the signature.

Set Cancel to true to terminate JSON processing on this stage.

Notification Event (JAdESVerifier Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxJAdESVerifierNotificationEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierNotificationEvent)(System::TObject* Sender, TsbxJAdESVerifierNotificationEventParams *e);
__property TsbxJAdESVerifierNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This component can fire this event with the following EventID values:

ObjectNeeded Event (JAdESVerifier Component)

This event is fired when object is required.

Syntax

typedef struct {
  String URI;
  String ContentType;
  bool Base64;
} TsbxJAdESVerifierObjectNeededEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierObjectNeededEvent)(System::TObject* Sender, TsbxJAdESVerifierObjectNeededEventParams *e);
__property TsbxJAdESVerifierObjectNeededEvent OnObjectNeeded = { read=FOnObjectNeeded, write=FOnObjectNeeded };

Remarks

This event is triggered when the type of signed data is ObjectIdByURI mechanism (jasdtObjectIdByURI). It is fired to request the data to be signed/verified.

The event handler must pass object data to the component via DataFile or DataStream or DataBytes or DataString property.

ObjectValidate Event (JAdESVerifier Component)

This event is fired when object should be verified by user.

Syntax

typedef struct {
  String URI;
  String ContentType;
  String HashAlgorithm;
  DynamicArray Hash;
  bool Base64;
  bool Valid;
} TsbxJAdESVerifierObjectValidateEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierObjectValidateEvent)(System::TObject* Sender, TsbxJAdESVerifierObjectValidateEventParams *e);
__property TsbxJAdESVerifierObjectValidateEvent OnObjectValidate = { read=FOnObjectValidate, write=FOnObjectValidate };

Remarks

This event is triggered when the type of signed data is ObjectIdByURIHash mechanism (jasdtObjectIdByURIHash). It is fired to validate the detached object.

The event handler must pass the object validity to the component via Valid parameter.

SignatureFound Event (JAdESVerifier Component)

Signifies the start of signature validation.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateSignature;
  bool ValidateChain;
} TsbxJAdESVerifierSignatureFoundEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierSignatureFoundEvent)(System::TObject* Sender, TsbxJAdESVerifierSignatureFoundEventParams *e);
__property TsbxJAdESVerifierSignatureFoundEvent OnSignatureFound = { read=FOnSignatureFound, write=FOnSignatureFound };

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (JAdESVerifier Component)

Marks the completion of the signature validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  int ValidationResult;
} TsbxJAdESVerifierSignatureValidatedEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierSignatureValidatedEvent)(System::TObject* Sender, TsbxJAdESVerifierSignatureValidatedEventParams *e);
__property TsbxJAdESVerifierSignatureValidatedEvent OnSignatureValidated = { read=FOnSignatureValidated, write=FOnSignatureValidated };

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (JAdESVerifier Component)

Signifies the start of a timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateTimestamp;
  bool ValidateChain;
} TsbxJAdESVerifierTimestampFoundEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTimestampFoundEvent)(System::TObject* Sender, TsbxJAdESVerifierTimestampFoundEventParams *e);
__property TsbxJAdESVerifierTimestampFoundEvent OnTimestampFound = { read=FOnTimestampFound, write=FOnTimestampFound };

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (JAdESVerifier Component)

Reports the completion of the timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  String Time;
  int ValidationResult;
  int ChainValidationResult;
  int ChainValidationDetails;
} TsbxJAdESVerifierTimestampValidatedEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTimestampValidatedEvent)(System::TObject* Sender, TsbxJAdESVerifierTimestampValidatedEventParams *e);
__property TsbxJAdESVerifierTimestampValidatedEvent OnTimestampValidated = { read=FOnTimestampValidated, write=FOnTimestampValidated };

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (JAdESVerifier Component)

Fires when a remote TLS party requests a client certificate.

Syntax

typedef struct {
  String Host;
  String CANames;
} TsbxJAdESVerifierTLSCertNeededEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTLSCertNeededEvent)(System::TObject* Sender, TsbxJAdESVerifierTLSCertNeededEventParams *e);
__property TsbxJAdESVerifierTLSCertNeededEvent OnTLSCertNeeded = { read=FOnTLSCertNeeded, write=FOnTLSCertNeeded };

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (JAdESVerifier Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

typedef struct {
  String ServerHost;
  String ServerIP;
  bool Accept;
} TsbxJAdESVerifierTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTLSCertValidateEvent)(System::TObject* Sender, TsbxJAdESVerifierTLSCertValidateEventParams *e);
__property TsbxJAdESVerifierTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (JAdESVerifier Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

typedef struct {
  String Host;
  String Version;
  String Ciphersuite;
  DynamicArray ConnectionId;
  bool Abort;
} TsbxJAdESVerifierTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTLSEstablishedEvent)(System::TObject* Sender, TsbxJAdESVerifierTLSEstablishedEventParams *e);
__property TsbxJAdESVerifierTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

The component uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (JAdESVerifier Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

typedef struct {
  String Host;
  bool Abort;
} TsbxJAdESVerifierTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTLSHandshakeEvent)(System::TObject* Sender, TsbxJAdESVerifierTLSHandshakeEventParams *e);
__property TsbxJAdESVerifierTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (JAdESVerifier Component)

Reports the graceful closure of a TLS connection.

Syntax

typedef struct {
  String Host;
} TsbxJAdESVerifierTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxJAdESVerifierTLSShutdownEvent)(System::TObject* Sender, TsbxJAdESVerifierTLSShutdownEventParams *e);
__property TsbxJAdESVerifierTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (JAdESVerifier Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

JAdESVerifier Config Settings

Base Config Settings

Trappable Errors (JAdESVerifier Component)

JAdESVerifier Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
	53477377   Input file does not exist (SB_ERROR_JADES_INPUTFILE_NOT_EXISTS)