MessageDecryptor Component

Properties   Methods   Events   Config Settings   Errors  

The MessageDecryptor component decrypts data that is stored in the PKCS#7 format.

Syntax

TsbxMessageDecryptor

Remarks

PKCS#7 (Public Key Cryptography Standard #7) is a common format used to store encrypted and signed data. It is used by a variety of protocols, including S/MIME and CMS.

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

CertificateBytesReturns raw certificate data in DER format.
CertificateHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
CertificateIssuerThe common name of the certificate issuer (CA), typically a company name.
CertificateIssuerRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
CertificateSerialNumberReturns the certificate's serial number.
CertificateSubjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
CertificateSubjectRDNA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
CertCountThe number of records in the Cert arrays.
CertBytesReturns raw certificate data in DER format.
CertHandleAllows to get or set a 'handle', a unique identifier of the underlying property object.
EncryptionAlgorithmThe symmetric cipher that was used to encrypt the data.
EncryptionTypeSpecifies the kind of encrypted message to create.
ExternalCryptoAsyncDocumentIDSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
ExternalCryptoCustomParamsCustom parameters to be passed to the signing service (uninterpreted).
ExternalCryptoDataAdditional data to be included in the async state and mirrored back by the requestor.
ExternalCryptoExternalHashCalculationSpecifies whether the message hash is to be calculated at the external endpoint.
ExternalCryptoHashAlgorithmSpecifies the request's signature hash algorithm.
ExternalCryptoKeyIDThe ID of the pre-shared key used for DC request authentication.
ExternalCryptoKeySecretThe pre-shared key used for DC request authentication.
ExternalCryptoMethodSpecifies the asynchronous signing method.
ExternalCryptoModeSpecifies the external cryptography mode.
ExternalCryptoPublicKeyAlgorithmProvide public key algorithm here if the certificate is not available on the pre-signing stage.
FIPSModeReserved.
InputBytesUse this property to pass the input to component in the byte array form.
InputFilePath to the file containing the encrypted message.
KeyThe symmetric key to use for decryption.
OutputBytesUse this property to read the output the component object has produced.
OutputFilePath to the file to save the decrypted data to.
SignedAttributeCountThe number of records in the SignedAttribute arrays.
SignedAttributeOIDThe object identifier of the attribute.
SignedAttributeValueThe value of the attribute.
UnsignedAttributeCountThe number of records in the UnsignedAttribute arrays.
UnsignedAttributeOIDThe object identifier of the attribute.
UnsignedAttributeValueThe value of the attribute.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

CheckEncryptionTypeDetermines the type of encrypted message in the supplied file.
ConfigSets or retrieves a configuration setting.
DecryptAttempts to decrypt an encrypted PKCS#7 message.
DoActionPerforms an additional action.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ErrorInformation about errors during PKCS#7 message decryption.
ExternalDecryptHandles remote or external decryption.
NotificationThis event notifies the application about an underlying control flow event.
RecipientFoundFires to report a message addressee parameters.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

NoOuterContentInfoWhether the message has outer content.
OAEPHashAlgorithmHash algorithm to be used in RSA-OAEP.
TempPathPath for storing temporary files.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the component.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client components should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

CertificateBytes Property (MessageDecryptor Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray CertificateBytes = { read=FCertificateBytes };

Remarks

Returns raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

CertificateHandle Property (MessageDecryptor Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CertificateHandle = { read=FCertificateHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is read-only and not available at design time.

Data Type

Long64

CertificateIssuer Property (MessageDecryptor Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String CertificateIssuer = { read=FCertificateIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

This property is read-only and not available at design time.

Data Type

String

CertificateIssuerRDN Property (MessageDecryptor Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

__property String CertificateIssuerRDN = { read=FCertificateIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

This property is read-only and not available at design time.

Data Type

String

CertificateSerialNumber Property (MessageDecryptor Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray CertificateSerialNumber = { read=FCertificateSerialNumber };

Remarks

Returns the certificate's serial number.

This property is read-only and not available at design time.

Data Type

Byte Array

CertificateSubject Property (MessageDecryptor Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String CertificateSubject = { read=FCertificateSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

This property is read-only and not available at design time.

Data Type

String

CertificateSubjectRDN Property (MessageDecryptor Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

__property String CertificateSubjectRDN = { read=FCertificateSubjectRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

This property is read-only and not available at design time.

Data Type

String

CertCount Property (MessageDecryptor Component)

The number of records in the Cert arrays.

Syntax

__property int CertCount = { read=FCertCount, write=FSetCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at CertCount - 1.

This property is not available at design time.

Data Type

Integer

CertBytes Property (MessageDecryptor Component)

Returns raw certificate data in DER format.

Syntax

__property DynamicArray CertBytes[int CertIndex] = { read=FCertBytes };

Remarks

Returns raw certificate data in DER format.

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CertHandle Property (MessageDecryptor Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CertHandle[int CertIndex] = { read=FCertHandle, write=FSetCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CertCount property.

This property is not available at design time.

Data Type

Long64

EncryptionAlgorithm Property (MessageDecryptor Component)

The symmetric cipher that was used to encrypt the data.

Syntax

__property String EncryptionAlgorithm = { read=FEncryptionAlgorithm };

Default Value

""

Remarks

This property contains the symmetric algorithm that the creator had used to encrypt the message.

This property is read-only and not available at design time.

Data Type

String

EncryptionType Property (MessageDecryptor Component)

Specifies the kind of encrypted message to create.

Syntax

__property TsbxMessageDecryptorEncryptionTypes EncryptionType = { read=FEncryptionType };
enum TsbxMessageDecryptorEncryptionTypes { metUnknown=0, metCertEncrypted=1, metKeyEncrypted=2, metCertEncryptedAndAuthenticated=3 };

Default Value

metUnknown

Remarks

Possible values:

metUnknown0Unknown or unsupported encryption type

metCertEncrypted1Certificate-based encryption

metKeyEncrypted2Symmetric key-based encryption

metCertEncryptedAndAuthenticated3Certificate-based encryption with authentication (AEAD)

This property is read-only.

Data Type

Integer

ExternalCryptoAsyncDocumentID Property (MessageDecryptor Component)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

__property String ExternalCryptoAsyncDocumentID = { read=FExternalCryptoAsyncDocumentID, write=FSetExternalCryptoAsyncDocumentID };

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (MessageDecryptor Component)

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

__property String ExternalCryptoCustomParams = { read=FExternalCryptoCustomParams, write=FSetExternalCryptoCustomParams };

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (MessageDecryptor Component)

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

__property String ExternalCryptoData = { read=FExternalCryptoData, write=FSetExternalCryptoData };

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (MessageDecryptor Component)

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

__property bool ExternalCryptoExternalHashCalculation = { read=FExternalCryptoExternalHashCalculation, write=FSetExternalCryptoExternalHashCalculation };

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (MessageDecryptor Component)

Specifies the request's signature hash algorithm.

Syntax

__property String ExternalCryptoHashAlgorithm = { read=FExternalCryptoHashAlgorithm, write=FSetExternalCryptoHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Data Type

String

ExternalCryptoKeyID Property (MessageDecryptor Component)

The ID of the pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeyID = { read=FExternalCryptoKeyID, write=FSetExternalCryptoKeyID };

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (MessageDecryptor Component)

The pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeySecret = { read=FExternalCryptoKeySecret, write=FSetExternalCryptoKeySecret };

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (MessageDecryptor Component)

Specifies the asynchronous signing method.

Syntax

__property TsbxMessageDecryptorExternalCryptoMethods ExternalCryptoMethod = { read=FExternalCryptoMethod, write=FSetExternalCryptoMethod };
enum TsbxMessageDecryptorExternalCryptoMethods { asmdPKCS1=0, asmdPKCS7=1 };

Default Value

asmdPKCS1

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Data Type

Integer

ExternalCryptoMode Property (MessageDecryptor Component)

Specifies the external cryptography mode.

Syntax

__property TsbxMessageDecryptorExternalCryptoModes ExternalCryptoMode = { read=FExternalCryptoMode, write=FSetExternalCryptoMode };
enum TsbxMessageDecryptorExternalCryptoModes { ecmDefault=0, ecmDisabled=1, ecmGeneric=2, ecmDCAuth=3, ecmDCAuthJSON=4 };

Default Value

ecmDefault

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (MessageDecryptor Component)

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

__property String ExternalCryptoPublicKeyAlgorithm = { read=FExternalCryptoPublicKeyAlgorithm, write=FSetExternalCryptoPublicKeyAlgorithm };

Default Value

""

Remarks

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Data Type

String

FIPSMode Property (MessageDecryptor Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

InputBytes Property (MessageDecryptor Component)

Use this property to pass the input to component in the byte array form.

Syntax

__property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes };

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (MessageDecryptor Component)

Path to the file containing the encrypted message.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

Use this property to provide a file containing the encrypted data.

Data Type

String

Key Property (MessageDecryptor Component)

The symmetric key to use for decryption.

Syntax

__property DynamicArray Key = { read=FKey, write=FSetKey };

Remarks

Use this property to provide the symmetric key to decrypt the data. This property is only applicable for processing data of EncryptedData subtype.

Assign this property before calling Decrypt.

This property is not available at design time.

Data Type

Byte Array

OutputBytes Property (MessageDecryptor Component)

Use this property to read the output the component object has produced.

Syntax

__property DynamicArray OutputBytes = { read=FOutputBytes };

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (MessageDecryptor Component)

Path to the file to save the decrypted data to.

Syntax

__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };

Default Value

""

Remarks

Use this property to specify the output file where the decrypted message should be saved.

Data Type

String

SignedAttributeCount Property (MessageDecryptor Component)

The number of records in the SignedAttribute arrays.

Syntax

__property int SignedAttributeCount = { read=FSignedAttributeCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at SignedAttributeCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignedAttributeOID Property (MessageDecryptor Component)

The object identifier of the attribute.

Syntax

__property String SignedAttributeOID[int SignedAttributeIndex] = { read=FSignedAttributeOID };

Default Value

""

Remarks

The object identifier of the attribute.

The SignedAttributeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedAttributeCount property.

This property is read-only and not available at design time.

Data Type

String

SignedAttributeValue Property (MessageDecryptor Component)

The value of the attribute.

Syntax

__property DynamicArray SignedAttributeValue[int SignedAttributeIndex] = { read=FSignedAttributeValue };

Remarks

The value of the attribute.

The SignedAttributeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignedAttributeCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

UnsignedAttributeCount Property (MessageDecryptor Component)

The number of records in the UnsignedAttribute arrays.

Syntax

__property int UnsignedAttributeCount = { read=FUnsignedAttributeCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at UnsignedAttributeCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

UnsignedAttributeOID Property (MessageDecryptor Component)

The object identifier of the attribute.

Syntax

__property String UnsignedAttributeOID[int UnsignedAttributeIndex] = { read=FUnsignedAttributeOID };

Default Value

""

Remarks

The object identifier of the attribute.

The UnsignedAttributeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UnsignedAttributeCount property.

This property is read-only and not available at design time.

Data Type

String

UnsignedAttributeValue Property (MessageDecryptor Component)

The value of the attribute.

Syntax

__property DynamicArray UnsignedAttributeValue[int UnsignedAttributeIndex] = { read=FUnsignedAttributeValue };

Remarks

The value of the attribute.

The UnsignedAttributeIndex parameter specifies the index of the item in the array. The size of the array is controlled by the UnsignedAttributeCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CheckEncryptionType Method (MessageDecryptor Component)

Determines the type of encrypted message in the supplied file.

Syntax

int __fastcall CheckEncryptionType();

Remarks

Use this method to determine the kind of the signature stored in InputFile (InputStream).

metUnknown0Unknown or unsupported encryption type

metCertEncrypted1Certificate-based encryption

metKeyEncrypted2Symmetric key-based encryption

metCertEncryptedAndAuthenticated3Certificate-based encryption with authentication (AEAD)

Config Method (MessageDecryptor Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Decrypt Method (MessageDecryptor Component)

Attempts to decrypt an encrypted PKCS#7 message.

Syntax

void __fastcall Decrypt();

Remarks

Call this method to attempt to decrypt the PKCS#7 encrypted data. This call supports EnvelopedData and EncryptedData subtypes on input.

Use InputFile or InputStream property to provide the data, and either Certificates or Key to supply the decryption key material.

When processing enveloped data, the component may fire RecipientFound event to report recipient information.

DoAction Method (MessageDecryptor Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Error Event (MessageDecryptor Component)

Information about errors during PKCS#7 message decryption.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxMessageDecryptorErrorEventParams;
typedef void __fastcall (__closure *TsbxMessageDecryptorErrorEvent)(System::TObject* Sender, TsbxMessageDecryptorErrorEventParams *e);
__property TsbxMessageDecryptorErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Messages section.

ExternalDecrypt Event (MessageDecryptor Component)

Handles remote or external decryption.

Syntax

typedef struct {
  String OperationId;
  String Algorithm;
  String Pars;
  String EncryptedData;
  String Data;
} TsbxMessageDecryptorExternalDecryptEventParams;
typedef void __fastcall (__closure *TsbxMessageDecryptorExternalDecryptEvent)(System::TObject* Sender, TsbxMessageDecryptorExternalDecryptEventParams *e);
__property TsbxMessageDecryptorExternalDecryptEvent OnExternalDecrypt = { read=FOnExternalDecrypt, write=FOnExternalDecrypt };

Remarks

Assign a handler to this event if you need to delegate a low-level decryption operation to an external, remote, or custom decryption engine. The handler receives a encrypted value in the EncryptedData parameter, and is expected to decrypt it and place the decrypted value into the Data parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. Algorithm specifies the encryption algorithm being used, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for EncryptedData, Data, and Pars parameters. If your decryption engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the decryption.

A sample data encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

Notification Event (MessageDecryptor Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxMessageDecryptorNotificationEventParams;
typedef void __fastcall (__closure *TsbxMessageDecryptorNotificationEvent)(System::TObject* Sender, TsbxMessageDecryptorNotificationEventParams *e);
__property TsbxMessageDecryptorNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

RecipientFound Event (MessageDecryptor Component)

Fires to report a message addressee parameters.

Syntax

typedef struct {
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
} TsbxMessageDecryptorRecipientFoundEventParams;
typedef void __fastcall (__closure *TsbxMessageDecryptorRecipientFoundEvent)(System::TObject* Sender, TsbxMessageDecryptorRecipientFoundEventParams *e);
__property TsbxMessageDecryptorRecipientFoundEvent OnRecipientFound = { read=FOnRecipientFound, write=FOnRecipientFound };

Remarks

This event is fired for each addressee the message is encrypted for. It may fire several times in a row if the message is encrypted for more than one recipient.

The IssuerRDN, SerialNumber, and SubjectKeyID parameters to identify the recipient's certificate. CertFound indicates if the specified certificate has been located in Certificates collection. If it wasn't, you might want to look up the certificate manually, and add it to the collection inside the event handler.

Config Settings (MessageDecryptor Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

MessageDecryptor Config Settings

NoOuterContentInfo:   Whether the message has outer content.

Tells the component whether the message to be decrypted has any outer content.

OAEPHashAlgorithm:   Hash algorithm to be used in RSA-OAEP.

Defines which hash algorithm should be used in RSA-OAEP scheme.

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the component.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the component.

Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the component. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the component is set to "local", the property returns/restores the rules from/to the internal storage of the component. If StaticDNS of the component is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the components.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (MessageDecryptor Component)

MessageDecryptor Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)