JAdESVerifier Component

Properties Methods Events Config Settings Errors

The JAdESVerifier component verifies signatures over JSON objects.

Syntax

TsbxJAdESVerifier

Remarks

Use JAdESVerifier to validate electronic signatures over JSON structures. Generic (JWS) and JAdES (JSON Advanced Electronic Signatures) are supported.

JAdESVerifier validates each signature from two perspectives: the integrity and validity of the signature itself (i.e. its correspondence to the JSON data it covers), and the validity and trustworthiness of the signing certificate chain. These two signature aspects are generally independent of each other: the signature may be valid but the chain may not be trusted, or, the other way round, the chain may be trusted, but the integrity of the signature may be violated. Under normal circumstances both the signature and the chain must be valid for the signature to be considered good.

To initiate the validation, assign the path to the signed JSON file to the InputFile property (alternatively, you can provide it in a memory buffer via InputBytes or InputString property), and call Verify method. For every signature located in the document, JAdESVerifier will fire the SignatureFound event. This event lets you specify whether you want JAdESVerifier to validate the signature, the chain, or both.

Note: it does not mean that any of the two is optional. This API lets you be flexible in how you validate documents in your code, to allow for a variety of validation scenarios. For example, if your trust environment relies on certificate pinning, validating the chain by JAdESVerifier internally may cause unnecessary burden on the system, in which case (but not in others!) it may be reasonable to disable it in the event handler.

Once SignatureFound returns, JAdESVerifier proceeds to the signature validation routine in accordance with the provided settings. Upon completion of the validation, SignatureValidated event is fired, and the validation results are separately provided via SignatureValidationResult and ChainValidationResult properties of the relevant signature object. Other information about the signature can be accessed via the Signatures property.

Useful settings and properties

The following properties of JAdESVerifier may be handy when working with this component:

OfflineMode lets you validate the JSON object without contacting online revocation sources. Paired with switched off system trust settings, it can be used to establish the long-term validity of the signed object and the completeness of validation material included in it.
RevocationCheck lets you adjust the revocation checking preferences.
ValidatedSigningTime returns the signing time as recorded in the embedded signature timestamp. This is in contrast to ClaimedSigningTime, which returns the signing time as specified by the signer.
ValidationLog is a great way to find out the details of chain validation failures. This property returns a comprehensive validation log that reports all the issues encountered during the validation.

By default, JAdESVerifier uses the system trust settings to establish certificate chain validity. You can configure it to use your own, custom validation environment by providing the necessary trust elements via KnownCertificates, TrustedCertificates, KnownCRLs, and other similar properties.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


AllSignaturesValid	The cumulative validity of all signatures.
AutoValidateSignatures	Specifies whether component should validate any present signatures when the JWS/JAdES signature is opened.
BlockedCertificates	The certificates that must be rejected as trust anchors.
Certificates	A collection of certificates included in the electronic signature.
CompactForm	Specifies if the JWS compact serialization to be used.
ContentType	Specifies payload content type.
CRLs	A collection of certificate revocation lists embedded into the signature by the signer.
DataBytes	Use this property to pass a payload or an object data to component in the byte array form.
DataFile	A path to a file containing a payload or an object data.
DataString	Use this property to pass a payload or an object data to component in the string form.
Detached	Specifies whether a detached signature should be produced or verified.
ExtractPayload	Specifies whether a payload should be extracted.
FIPSMode	Reserved.
FlattenedSignature	Specifies if the flattened signature to be used.
IgnoreChainValidationErrors	Makes the component tolerant to chain validation errors.
InputBytes	Use this property to pass the input to component in the byte array form.
InputFile	The file to be signed.
InputString	Use this property to pass the input to component in the string form.
KnownCertificates	Additional certificates for chain validation.
KnownCRLs	Additional CRLs for chain validation.
KnownOCSPs	Additional OCSP responses for chain validation.
OCSPs	A collection of OCSP responses embedded into the signature.
OfflineMode	Switches the component to the offline mode.
OutputBytes	Use this property to read the output the component object has produced.
OutputFile	Defines where to save the signature.
OutputString	Use this property to read the output the component object has produced.
Profile	Specifies a pre-defined profile to apply when creating the signature.
Proxy	The proxy server settings.
RevocationCheck	Specifies the kind(s) of revocation check to perform.
Signatures	Provides details of all signatures found in the JWS/JAdES signature.
SocketSettings	Manages network connection settings.
Timestamps	Contains a collection of timestamps for the processed document.
TLSClientChain	The TLS client certificate chain.
TLSServerChain	The TLS server's certificate chain.
TLSSettings	Manages TLS layer settings.
TrustedCertificates	A list of trusted certificates for chain validation.
ValidationMoment	The time point at which signature validity is to be established.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


Close	Closes an opened JWS/JAdES signature.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
Open	Opens a JSON for verifying or removing signatures.
Revalidate	Revalidates a signature in accordance with current settings.
Unsign	Deletes a signature from the JWS/JAdES signature.
Verify	Verifies the JWS/JAdES signature.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


ChainElementDownload	Fires when there is a need to download a chain element from an online source.
ChainElementNeeded	Fires when an element required to validate the chain was not located.
ChainElementStore	This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.
ChainValidated	Reports the completion of a certificate chain validation.
ChainValidationProgress	This event is fired multiple times during chain validation to report various stages of the validation procedure.
Error	Information about errors during signing.
HTTPHeaderFieldNeeded	This event is fired when HTTP header field value is required.
Loaded	This event is fired when the JSON has been loaded into memory.
Notification	This event notifies the application about an underlying control flow event.
ObjectNeeded	This event is fired when object is required.
ObjectValidate	This event is fired when object should be verified by user.
SignatureFound	Signifies the start of signature validation.
SignatureValidated	Marks the completion of the signature validation routine.
TimestampFound	Signifies the start of a timestamp validation routine.
TimestampValidated	Reports the completion of the timestamp validation routine.
TLSCertNeeded	Fires when a remote TLS party requests a client certificate.
TLSCertValidate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
TLSEstablished	Fires when a TLS handshake with Host successfully completes.
TLSHandshake	Fires when a new TLS handshake is initiated, before the handshake commences.
TLSShutdown	Reports the graceful closure of a TLS connection.

Config Settings

The following is a list of config settings for the component with short descriptions. Click on the links for further details.


CertThumbprint	Specifies the certificate thumbprint.
CertURL	Specifies the certificate URL.
DataBase64	Specifies whether data is Base64-URL-encoded.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
IgnoreOCSPNoCheckExtension	Whether OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
KeyId	Specifies Key ID.
PolicyDescription	signature policy description.
PolicyExplicitText	The explicit text of the user notice.
PolicyUNNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganization	The organization part of the NoticeReference qualifier.
ProductionPlace	Identifies the place of the signature production.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
ProtectedHeader	Specifies the protected header.
PSSUsed	Whether RSASSA-PSS mode was used.
SignerAttrs	Identifies the signer attributes.
SignerCommitments	Identifies the signer commitments.
ThumbprintHashAlgorithm	Specifies the thumbprint hash algorithm.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
UnprotectedHeader	Specifies the unprotected header.
UseMicrosoftCTL	Enables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificates	Enables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
UseOwnDNSResolver	Specifies whether the client components should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

AllSignaturesValid Property (JAdESVerifier Component)

The cumulative validity of all signatures.

Syntax

property AllSignaturesValid: Boolean read get_AllSignaturesValid;

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

AutoValidateSignatures Property (JAdESVerifier Component)

Specifies whether component should validate any present signatures when the JWS/JAdES signature is opened.

Syntax

property AutoValidateSignatures: Boolean read get_AutoValidateSignatures write set_AutoValidateSignatures;

Default Value

true

Remarks

This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.

BlockedCertificates Property (JAdESVerifier Component)

The certificates that must be rejected as trust anchors.

Syntax

property BlockedCertificates: TsbxCertificateList read get_BlockedCertificates write set_BlockedCertificates;

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

This property is not available at design time.

Certificates Property (JAdESVerifier Component)

A collection of certificates included in the electronic signature.

Syntax

property Certificates: TsbxCertificateList read get_Certificates;

Remarks

Use this property to access all certificates included into the signature(s) by its creator.

This property is read-only and not available at design time.

CompactForm Property (JAdESVerifier Component)

Specifies if the JWS compact serialization to be used.

Syntax

property CompactForm: Boolean read get_CompactForm write set_CompactForm;

Default Value

false

Remarks

When this property is set to "true" value, the JAdES component will use the JWS compact serialization format when saving a signature.

The JWS compact serialization format is a compact, Url safe representation of a JWS (JSON Web Signature) or JWE (JSON Web Encryption) object, used for transmitting security tokens.

The JWS compact serialization format supports only one signature without unprotected header (only JWS or JAdES BaselineB signature).

ContentType Property (JAdESVerifier Component)

Specifies payload content type.

Syntax

property ContentType: String read get_ContentType;

Default Value

Remarks

Use this property to read the content type of the payload.

This property is read-only and not available at design time.

CRLs Property (JAdESVerifier Component)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax

property CRLs: TsbxCRLList read get_CRLs;

Remarks

Use this property to access the CRLs embedded into the signature by the signer.

This property is read-only and not available at design time.

DataBytes Property (JAdESVerifier Component)

Use this property to pass a payload or an object data to component in the byte array form.

Syntax

property DataBytes: TBytes read get_DataBytes write set_DataBytes;

Remarks

Assign a byte array containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

DataFile Property (JAdESVerifier Component)

A path to a file containing a payload or an object data.

Syntax

property DataFile: String read get_DataFile write set_DataFile;

Default Value

Remarks

Use this property to provide a JWS payload or an object data to be processed.

DataString Property (JAdESVerifier Component)

Use this property to pass a payload or an object data to component in the string form.

Syntax

property DataString: String read get_DataString write set_DataString;

Default Value

Remarks

Assign a string containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

Detached Property (JAdESVerifier Component)

Specifies whether a detached signature should be produced or verified.

Syntax

property Detached: Boolean read get_Detached write set_Detached;

Default Value

false

Remarks

Use this property to specify whether a detached signature should be produced or verified.

When this property is set to "true" value, the JWS payload will be detached from the signature and may either be a single detached object or the result of concatenating multiple detached data objects. In other words, the JWS payload and the signature are stored in separate objects.

If this property is set to "true" value, the user must provide the detached content via the DataFile or DataStream or DataBytes or DataString properties.

When Detached is set to "false" value, the JWS payload is included with the signature as a single object.

ExtractPayload Property (JAdESVerifier Component)

Specifies whether a payload should be extracted.

Syntax

property ExtractPayload: Boolean read get_ExtractPayload write set_ExtractPayload;

Default Value

false

Remarks

Use this property to specify whether a payload should be extracted when signature loaded. This applies only to non-detached signatures with a payload.

When this property is set to "true" value, the JWS payload will be extracted from the signature.

The user must provide the OutputFile or OutputStream properties with a filename or stream where to save the payload, if none is provided then payload is returned via OutputBytes or OutputString properties.

FIPSMode Property (JAdESVerifier Component)

Reserved.

Syntax

property FIPSMode: Boolean read get_FIPSMode write set_FIPSMode;

Default Value

false

Remarks

This property is reserved for future use.

FlattenedSignature Property (JAdESVerifier Component)

Specifies if the flattened signature to be used.

Syntax

property FlattenedSignature: Boolean read get_FlattenedSignature write set_FlattenedSignature;

Default Value

true

Remarks

This property determines whether to use the flattened JWS JSON serialization format. This format is optimized for the single digital signature case and flattens the general JWS JSON serialization syntax by removing the "signatures" member and instead placing the "protected", "header", and "signature" members at the top-level JSON object (at the same level as the "payload" member).

When the FlattenedSignature property is set to "true" value, the signature will be represented using the flattened JWS JSON serialization format, but it is only applicable when there is a single signature involved.

When the property is set to "false" value, the signature will be represented using the general JWS JSON serialization format.

IgnoreChainValidationErrors Property (JAdESVerifier Component)

Makes the component tolerant to chain validation errors.

Syntax

property IgnoreChainValidationErrors: Boolean read get_IgnoreChainValidationErrors write set_IgnoreChainValidationErrors;

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (JAdESVerifier Component)

Use this property to pass the input to component in the byte array form.

Syntax

property InputBytes: TBytes read get_InputBytes write set_InputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

InputFile Property (JAdESVerifier Component)

The file to be signed.

Syntax

property InputFile: String read get_InputFile write set_InputFile;

Default Value

Remarks

Provide the path to the JSON to be signed.

InputString Property (JAdESVerifier Component)

Use this property to pass the input to component in the string form.

Syntax

property InputString: String read get_InputString write set_InputString;

Default Value

Remarks

Assign a string containing the data to be processed to this property.

This property is not available at design time.

KnownCertificates Property (JAdESVerifier Component)

Additional certificates for chain validation.

Syntax

property KnownCertificates: TsbxCertificateList read get_KnownCertificates write set_KnownCertificates;

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of certificates to be added to this collection is roughly equivalent to that of Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

This property is not available at design time.

KnownCRLs Property (JAdESVerifier Component)

Additional CRLs for chain validation.

Syntax

property KnownCRLs: TsbxCRLList read get_KnownCRLs write set_KnownCRLs;

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

This property is not available at design time.

KnownOCSPs Property (JAdESVerifier Component)

Additional OCSP responses for chain validation.

Syntax

property KnownOCSPs: TsbxOCSPResponseList read get_KnownOCSPs write set_KnownOCSPs;

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

This property is not available at design time.

OCSPs Property (JAdESVerifier Component)

A collection of OCSP responses embedded into the signature.

Syntax

property OCSPs: TsbxOCSPResponseList read get_OCSPs;

Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

This property is read-only and not available at design time.

OfflineMode Property (JAdESVerifier Component)

Switches the component to the offline mode.

Syntax

property OfflineMode: Boolean read get_OfflineMode write set_OfflineMode;

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (JAdESVerifier Component)

Use this property to read the output the component object has produced.

Syntax

property OutputBytes: TBytes read get_OutputBytes;

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

OutputFile Property (JAdESVerifier Component)

Defines where to save the signature.

Syntax

property OutputFile: String read get_OutputFile write set_OutputFile;

Default Value

Remarks

Specifies the path where the JWS/JAdES signature should be saved.

OutputString Property (JAdESVerifier Component)

Use this property to read the output the component object has produced.

Syntax

property OutputString: String read get_OutputString;

Default Value

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Profile Property (JAdESVerifier Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

property Profile: String read get_Profile write set_Profile;

Default Value

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (JAdESVerifier Component)

The proxy server settings.

Syntax

property Proxy: TsbxProxySettings read get_Proxy;

Remarks

Use this property to tune up the proxy server settings.

This property is read-only.

RevocationCheck Property (JAdESVerifier Component)

Specifies the kind(s) of revocation check to perform.

Syntax

property RevocationCheck: TsbxRevocationCheckKinds read get_RevocationCheck write set_RevocationCheck;

TsbxRevocationCheckKinds = (
  crcNone,
  crcAuto,
  crcAllCRL,
  crcAllOCSP,
  crcAllCRLAndOCSP,
  crcAnyCRL,
  crcAnyOCSP,
  crcAnyCRLOrOCSP,
  crcAnyOCSPOrCRL
);

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRL) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The 'crcAll*' modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Signatures Property (JAdESVerifier Component)

Provides details of all signatures found in the JWS/JAdES signature.

Syntax

property Signatures: TsbxJAdESSignatureList read get_Signatures;

Remarks

Use this property to get the details of all the signatures identified in the JWS/JAdES signature.

This property is read-only and not available at design time.

SocketSettings Property (JAdESVerifier Component)

Manages network connection settings.

Syntax

property SocketSettings: TsbxSocketSettings read get_SocketSettings;

Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Timestamps Property (JAdESVerifier Component)

Contains a collection of timestamps for the processed document.

Syntax

property Timestamps: TsbxTimestampInfoList read get_Timestamps;

Remarks

Use this property to access the timestamps included in the processed document.

This property is read-only and not available at design time.

TLSClientChain Property (JAdESVerifier Component)

The TLS client certificate chain.

Syntax

property TLSClientChain: TsbxCertificateList read get_TLSClientChain write set_TLSClientChain;

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the component. Note that the client's end-entity certificate should have a private key associated with it.

This property is not available at design time.

TLSServerChain Property (JAdESVerifier Component)

The TLS server's certificate chain.

Syntax

property TLSServerChain: TsbxCertificateList read get_TLSServerChain;

Remarks

Use this property to access the certificate chain sent by the TLS server.

This property is read-only and not available at design time.

TLSSettings Property (JAdESVerifier Component)

Manages TLS layer settings.

Syntax

property TLSSettings: TsbxTLSSettings read get_TLSSettings;

Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

TrustedCertificates Property (JAdESVerifier Component)

A list of trusted certificates for chain validation.

Syntax

property TrustedCertificates: TsbxCertificateList read get_TrustedCertificates write set_TrustedCertificates;

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same than that of Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

This property is not available at design time.

ValidationMoment Property (JAdESVerifier Component)

The time point at which signature validity is to be established.

Syntax

property ValidationMoment: String read get_ValidationMoment write set_ValidationMoment;

Default Value

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either signature creation time, or current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Close Method (JAdESVerifier Component)

Closes an opened JWS/JAdES signature.

Syntax

procedure Close(SaveChanges: Boolean);

Remarks

Use this method to close a previously opened JWS/JAdES signature. Set SaveChanges to true to apply any changes made.

Config Method (JAdESVerifier Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (JAdESVerifier Component)

Performs an additional action.

Syntax

function DoAction(ActionID: String; ActionParams: String): String;

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Open Method (JAdESVerifier Component)

Opens a JSON for verifying or removing signatures.

Syntax

procedure Open();

Remarks

Use this method to open a JSON for verifying or removing signatures. When finished, call Close to complete or discard the operation.

Revalidate Method (JAdESVerifier Component)

Revalidates a signature in accordance with current settings.

Syntax

procedure Revalidate(SigIndex: Integer);

Remarks

Use this method to re-validate a signature in the opened JWS/JAdES signature.

Unsign Method (JAdESVerifier Component)

Deletes a signature from the JWS/JAdES signature.

Syntax

procedure Unsign(SigIndex: Integer);

Remarks

Use this method to delete an existing signature from the JWS/JAdES signature. Use SigIndex parameter to specify the signature to be removed.

Verify Method (JAdESVerifier Component)

Verifies the JWS/JAdES signature.

Syntax

procedure Verify();

Remarks

Use this method to verify the JWS/JAdES signature.

ChainElementDownload Event (JAdESVerifier Component)

Fires when there is a need to download a chain element from an online source.

Syntax

type TChainElementDownloadEvent = procedure (
  Sender: TObject;
  Kind: Integer;
  const CertRDN: String;
  const CACertRDN: String;
  const Location: String;
  var Action: Integer
) of Object;

property OnChainElementDownload: TChainElementDownloadEvent read FOnChainElementDownload write FOnChainElementDownload;

Remarks

Subscribe to this event to be notified about validation element retrievals. Use Action parameter to suppress the download if required.


veaAuto	`0`	Handle the action automatically (the default behaviour)
veaContinue	`1`	Accept the request implied by the event (accept the certificate, allow the object retrieval)
veaReject	`2`	Reject the request implied by the event (reject the certificate, disallow the object retrieval)
veaAcceptNow	`3`	Accept the validated certificate immediately
veaAbortNow	`4`	Abort the validation, reject the certificate

ChainElementNeeded Event (JAdESVerifier Component)

Fires when an element required to validate the chain was not located.

Syntax

type TChainElementNeededEvent = procedure (
  Sender: TObject;
  Kind: Integer;
  const CertRDN: String;
  const CACertRDN: String
) of Object;

property OnChainElementNeeded: TChainElementNeededEvent read FOnChainElementNeeded write FOnChainElementNeeded;

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (JAdESVerifier Component)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

type TChainElementStoreEvent = procedure (
  Sender: TObject;
  Kind: Integer;
  Body: TBytes;
  var URI: String
) of Object;

property OnChainElementStore: TChainElementStoreEvent read FOnChainElementStore write FOnChainElementStore;

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (JAdESVerifier Component)

Reports the completion of a certificate chain validation.

Syntax

type TChainValidatedEvent = procedure (
  Sender: TObject;
  Index: Integer;
  const SubjectRDN: String;
  ValidationResult: Integer;
  ValidationDetails: Integer
) of Object;

property OnChainValidated: TChainValidatedEvent read FOnChainValidated write FOnChainValidated;

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationProgress Event (JAdESVerifier Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

type TChainValidationProgressEvent = procedure (
  Sender: TObject;
  const EventKind: String;
  const CertRDN: String;
  const CACertRDN: String;
  var Action: Integer
) of Object;

property OnChainValidationProgress: TChainValidationProgressEvent read FOnChainValidationProgress write FOnChainValidationProgress;

Remarks

Subscribe to this event to be notified about chain validation progress. Use Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind. Use Action parameter to adjust the validation flow.


veaAuto	`0`	Handle the action automatically (the default behaviour)
veaContinue	`1`	Accept the request implied by the event (accept the certificate, allow the object retrieval)
veaReject	`2`	Reject the request implied by the event (reject the certificate, disallow the object retrieval)
veaAcceptNow	`3`	Accept the validated certificate immediately
veaAbortNow	`4`	Abort the validation, reject the certificate

Error Event (JAdESVerifier Component)

Information about errors during signing.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

This event is fired in case of exceptional conditions during the JSON processing.

ErrorCode contains an error code and Description contains a textual description of the error.

HTTPHeaderFieldNeeded Event (JAdESVerifier Component)

This event is fired when HTTP header field value is required.

Syntax

type THTTPHeaderFieldNeededEvent = procedure (
  Sender: TObject;
  const FieldName: String;
  var FieldValues: String
) of Object;

property OnHTTPHeaderFieldNeeded: THTTPHeaderFieldNeededEvent read FOnHTTPHeaderFieldNeeded write FOnHTTPHeaderFieldNeeded;

Remarks

This event is triggered when the type of signed data is HttpHeaders mechanism (jasdtHttpHeaders). It indicates that a HTTP header field value is needed.

For "(request target)" field name value return request method and target URI seperated by space character. For example: "GET https://nsoftware.com/sbb/"

Loaded Event (JAdESVerifier Component)

This event is fired when the JSON has been loaded into memory.

Syntax

type TLoadedEvent = procedure (
  Sender: TObject;
  var Cancel: Boolean
) of Object;

property OnLoaded: TLoadedEvent read FOnLoaded write FOnLoaded;

Remarks

The handler for this event is a good place to check JWS/JAdES signature properties, which may be useful when preparing the signature.

Set Cancel to true to terminate JSON processing on this stage.

Notification Event (JAdESVerifier Component)

This event notifies the application about an underlying control flow event.

Syntax

type TNotificationEvent = procedure (
  Sender: TObject;
  const EventID: String;
  const EventParam: String
) of Object;

property OnNotification: TNotificationEvent read FOnNotification write FOnNotification;

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This component can fire this event with the following EventID values:


Loaded	Reports the completion of signature processing by the component. Use the event handler to access signature-related information. The EventParam value passed with this EventID is empty.
PayloadExtracted	Reports the completion of payload extraction by the component if ExtractPayload property is enabled. Use the event handler to access payload. The EventParam value passed with this EventID is empty.

ObjectNeeded Event (JAdESVerifier Component)

This event is fired when object is required.

Syntax

type TObjectNeededEvent = procedure (
  Sender: TObject;
  const URI: String;
  const ContentType: String;
  var Base64: Boolean
) of Object;

property OnObjectNeeded: TObjectNeededEvent read FOnObjectNeeded write FOnObjectNeeded;

Remarks

This event is triggered when the type of signed data is ObjectIdByURI mechanism (jasdtObjectIdByURI). It is fired to request the data to be signed/verified.

The event handler must pass object data to the component via DataFile or DataStream or DataBytes or DataString property.

ObjectValidate Event (JAdESVerifier Component)

This event is fired when object should be verified by user.

Syntax

type TObjectValidateEvent = procedure (
  Sender: TObject;
  const URI: String;
  const ContentType: String;
  const HashAlgorithm: String;
  Hash: TBytes;
  Base64: Boolean;
  var Valid: Boolean
) of Object;

property OnObjectValidate: TObjectValidateEvent read FOnObjectValidate write FOnObjectValidate;

Remarks

This event is triggered when the type of signed data is ObjectIdByURIHash mechanism (jasdtObjectIdByURIHash). It is fired to validate the detached object.

The event handler must pass the object validity to the component via Valid parameter.

SignatureFound Event (JAdESVerifier Component)

Signifies the start of signature validation.

Syntax

type TSignatureFoundEvent = procedure (
  Sender: TObject;
  Index: Integer;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  CertFound: Boolean;
  var ValidateSignature: Boolean;
  var ValidateChain: Boolean
) of Object;

property OnSignatureFound: TSignatureFoundEvent read FOnSignatureFound write FOnSignatureFound;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (JAdESVerifier Component)

Marks the completion of the signature validation routine.

Syntax

type TSignatureValidatedEvent = procedure (
  Sender: TObject;
  Index: Integer;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  ValidationResult: Integer
) of Object;

property OnSignatureValidated: TSignatureValidatedEvent read FOnSignatureValidated write FOnSignatureValidated;

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

TimestampFound Event (JAdESVerifier Component)

Signifies the start of a timestamp validation routine.

Syntax

type TTimestampFoundEvent = procedure (
  Sender: TObject;
  Index: Integer;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  CertFound: Boolean;
  var ValidateTimestamp: Boolean;
  var ValidateChain: Boolean
) of Object;

property OnTimestampFound: TTimestampFoundEvent read FOnTimestampFound write FOnTimestampFound;

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (JAdESVerifier Component)

Reports the completion of the timestamp validation routine.

Syntax

type TTimestampValidatedEvent = procedure (
  Sender: TObject;
  Index: Integer;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  const Time: String;
  ValidationResult: Integer;
  ChainValidationResult: Integer;
  ChainValidationDetails: Integer
) of Object;

property OnTimestampValidated: TTimestampValidatedEvent read FOnTimestampValidated write FOnTimestampValidated;

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

TLSCertNeeded Event (JAdESVerifier Component)

Fires when a remote TLS party requests a client certificate.

Syntax

type TTLSCertNeededEvent = procedure (
  Sender: TObject;
  const Host: String;
  const CANames: String
) of Object;

property OnTLSCertNeeded: TTLSCertNeededEvent read FOnTLSCertNeeded write FOnTLSCertNeeded;

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (JAdESVerifier Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

type TTLSCertValidateEvent = procedure (
  Sender: TObject;
  const ServerHost: String;
  const ServerIP: String;
  var Accept: Boolean
) of Object;

property OnTLSCertValidate: TTLSCertValidateEvent read FOnTLSCertValidate write FOnTLSCertValidate;

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (JAdESVerifier Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

type TTLSEstablishedEvent = procedure (
  Sender: TObject;
  const Host: String;
  const Version: String;
  const Ciphersuite: String;
  ConnectionId: TBytes;
  var Abort: Boolean
) of Object;

property OnTLSEstablished: TTLSEstablishedEvent read FOnTLSEstablished write FOnTLSEstablished;

Remarks

The component uses this event to notify the application about successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (JAdESVerifier Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

type TTLSHandshakeEvent = procedure (
  Sender: TObject;
  const Host: String;
  var Abort: Boolean
) of Object;

property OnTLSHandshake: TTLSHandshakeEvent read FOnTLSHandshake write FOnTLSHandshake;

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed with TLSEstablished event. If the server chooses to request a client certificate, TLSCertNeeded event will also be fired.

TLSShutdown Event (JAdESVerifier Component)

Reports the graceful closure of a TLS connection.

Syntax

type TTLSShutdownEvent = procedure (
  Sender: TObject;
  const Host: String
) of Object;

property OnTLSShutdown: TTLSShutdownEvent read FOnTLSShutdown write FOnTLSShutdown;

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

Bytes
TBytes

Returns raw certificate data in DER format.

CA
Boolean

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

CAKeyID
TBytes

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

CRLDistributionPoints
String

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Curve
String

Specifies the elliptic curve of the EC public key.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

Fingerprint
TBytes

Contains the fingerprint (a hash imprint) of this certificate.

FriendlyName
String

Contains an associated alias (friendly name) of the certificate.

Handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

HashAlgorithm
String

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Issuer
String

The common name of the certificate issuer (CA), typically a company name.

IssuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

KeyAlgorithm
String

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

KeyBits
Integer

Returns the length of the public key.

KeyFingerprint
TBytes

Returns a fingerprint of the public key contained in the certificate.

KeyUsage
Integer

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

KeyValid
Boolean

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
String

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

OCSPNoCheck
Boolean

Accessor to the value of the certificates ocsp-no-check extension.

Origin
Integer

Returns the origin of this certificate.

PolicyIDs
String

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

PrivateKeyBytes
TBytes

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

PrivateKeyExists
Boolean

Indicates whether the certificate has an associated private key.

PrivateKeyExtractable
Boolean

Indicates whether the private key is extractable

PublicKeyBytes
TBytes

Contains the certificate's public key in DER format.

QualifiedStatements
TsbxQualifiedStatementsTypes

Returns the qualified status of the certificate.

SelfSigned
Boolean

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
TBytes

Returns the certificate's serial number.

SigAlgorithm
String

Indicates the algorithm that was used by the CA to sign this certificate.

Subject
String

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

SubjectAlternativeName
String

Returns or sets the value of the Subject Alternative Name extension of the certificate.

SubjectKeyID
TBytes

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

SubjectRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

ValidFrom
String

The time point at which the certificate becomes valid, in UTC.

ValidTo
String

The time point at which the certificate expires, in UTC.

Constructors

constructor Create();

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields


Bytes TBytes	Returns raw CRL data in DER format.
CAKeyID TBytes	A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
EntryCount Integer	Returns the number of certificate status entries in the CRL.
Handle Int64	Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. `pdfSigner.setSigningCertHandle(certMgr.getCertHandle());`
Issuer String	The common name of the CRL issuer (CA), typically a company name.
IssuerRDN String	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
Location String	The URL that the CRL was downloaded from.
NextUpdate String	The planned time and date of the next version of this CRL to be published.
SigAlgorithm String	The public key algorithm that was used by the CA to sign this CRL.
TBS TBytes	The to-be-signed part of the CRL (the CRL without the signature part).
ThisUpdate String	The date and time at which this version of the CRL was published.

Constructors

constructor Create();

Creates an empty CRL object.

JAdESSignature Type

The component is a container for an JWS/JAdES signature.

Remarks

JSON message may include any number of JWS/JAdES signatures. component stores one of them.

Fields

CertificateIndex
Integer

Returns the index of the signing certificate in the Certificates collection

Use this property to look up the signing certificate in the Certificates collection.

ChainValidationDetails
Integer

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationResult
TsbxChainValidities

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

ClaimedSigningTime
String

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

ContentType
String

Specifies payload content type.

Use this property to indicate the content type of the JWS Payload.

This property provides a way for the application to disambiguate among different kinds of objects that might be present in the payload, but it is typically not used when the kind of object is already known. The value of this property is a string that conforms to the Internet Media Type (MIME) format, such as "text/plain" or "application/json".

It is optional to use this property and it is recommended to omit the "application/" prefix of the media type value when it is not needed. The recipient of the signed message should treat the value as if "application/" were prepended to it, unless it already contains a '/'.

Countersigned
Boolean

Indicates if the signature is countersigned.

Use this property to find out whether the JWS/JAdES signature contains any countersignatures over the main signature(s).

Handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

HashAlgorithm
String

Specifies the hash algorithm to be used.

Supported values:


SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

IssuerRDN
String

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

JAdESVersion
TsbxJAdESVersions

Specifies JAdES version.

This property specifies the version of the JAdES specification the signature should comply with.

Supported values:


javUnknown	`0`
jav111	`1`	JAdES v1.1.1

LastArchivalTime
String

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

Level
TsbxJAdESSignatureLevels

Specifies the signature kind and level.

Supported values:


jaslJWS	`0`	JSON Web Signature (JWS)
jaslBaselineB	`1`	JAdES Baseline B (B-B) level
jaslBaselineT	`2`	JAdES Baseline T (B-T) level
jaslBaselineLT	`3`	JAdES Baseline LT (B-LT) level
jaslBaselineLTA	`4`	JAdES Baseline LTA (B-LTA) level

ObjectType
String

Specifies signature object content type.

Use this property to specify the content type of the signature object.

It is used by the application to differentiate between different types of objects that might be present in an application data structure containing a JWS or JAdES.

The default value is "jose+json" which indicates that it is a JWS or JAdES using the JWS JSON Serialization, and "jose" which indicates that the object is a JWS or JAdES using the JWS Compact Serialization. Other type values can also be used by the application.

ParentSignatureIndex
Integer

Returns the index of the parent signature, if applicable.

Use this property to establish the index of the associated parent signature object in the signature collection.

PolicyHash
String

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

PolicyHashAlgorithm
String

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from PolicyHash.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

PolicyID
String

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

PolicyURI
String

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

SerialNumber
TBytes

The serial number of the timestamp.

SignatureBytes
TBytes

Returns the binary representation of the JSON/JAdES signature.

SignatureValidationResult
TsbxSignatureValidities

The outcome of the cryptographic signature validation.

The following signature validity values are supported:


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

SignedData
String

The sigD header parameter in JSON format that was included or to be included into the signature.

SignedDataType
TsbxJAdESSignedDataTypes

Specifies the type of signed data.

Supported values:


jasdtPayload	`0`	JWS Payload
jasdtHttpHeaders	`1`	HttpHeaders mechanism
jasdtObjectIdByURI	`2`	ObjectIdByURI mechanism
jasdtObjectIdByURIHash	`3`	ObjectIdByURIHash mechanism
jasdtCustom	`4`	Custom mechanism

SubjectKeyID
TBytes

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

SubjectRDN
String

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

Timestamped
Boolean

Use this property to establish whether the signature contains an embedded timestamp.

ValidatedSigningTime
String

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

ClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

ValidationLog
String

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

Constructors

constructor Create();

Creates a new JAdES/JWS signature object.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRL).

An OCSP response is a snapshot of the certificate status at a given time.

Fields


Bytes TBytes	Buffer containing raw OCSP response data.
EntryCount Integer	The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
Handle Int64	Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. `pdfSigner.setSigningCertHandle(certMgr.getCertHandle());`
Issuer String	Indicates the issuer of this response (a CA or its authorized representative).
IssuerRDN String	Indicates the RDN of the issuer of this response (a CA or its authorized representative).
Location String	Location of the OCSP responder.
ProducedAt String	Specifies the time when the response was produced, in UTC.

Constructors

constructor Create();

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Address
String

The IP address of the proxy server.

Authentication
TsbxProxyAuthTypes

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

Password
String

The password to authenticate to the proxy server.

Port
Integer

The port on the proxy server to connect to.

ProxyType
TsbxProxyTypes

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

RequestHeaders
String

Contains HTTP request headers for WebTunnel and HTTP proxy.

ResponseBody
String

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

ResponseHeaders
String

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

UseIPv6
Boolean

Specifies whether IPv6 should be used when connecting through the proxy.

UseProxy
Boolean

Enables or disables proxy-driven connection.

Username
String

Specifies the username credential for proxy authentication.

Constructors

constructor Create();

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

DNSMode
TsbxDNSResolveModes

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

DNSPort
Integer

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
Integer

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

DNSServers
String

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
Integer

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

IncomingSpeedLimit
Integer

The maximum number of bytes to read from the socket, per second.

LocalAddress
String

The local network interface to bind the socket to.

LocalPort
Integer

The local port number to bind the socket to.

OutgoingSpeedLimit
Integer

The maximum number of bytes to write to the socket, per second.

Timeout
Integer

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
Boolean

Enables or disables IP protocol version 6.

Constructors

constructor Create();

Creates a new SocketSettings object.

TimestampInfo Type

A container for timestamp information.

Remarks

The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.

Fields

Accuracy
Int64

This field indicates the accuracy of the included time mark, in microseconds.

Bytes
TBytes

Returns raw timestamp data in DER format.

CertificateIndex
Integer

Returns the index of the TSA certificate in the Certificates collection

Use this property to look up the TSA certificate in the Certificates collection.

ChainValidationDetails
Integer

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationResult
TsbxChainValidities

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

HashAlgorithm
String

Returns the timestamp's hash algorithm


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

SerialNumber
TBytes

Returns the timestamp's serial number.

SignatureIndex
Integer

Returns the index of the owner signature, if applicable.

Use this property to establish the index of the associated signature object in the signature collection.

Time
String

The time point incorporated into the timestamp.

TimestampType
Integer

Returns the type of the timestamp.

Available options:


tstUnknown	`0`
tstLegacy	`1`	Supported by: AuthenticodeVerifier
tstTrusted	`2`	Supported by: AuthenticodeVerifier
tstGeneric	`3`	Supported by: CAdESVerifier
tstESC	`4`	Supported by: CAdESVerifier
tstContent	`5`	Supported by: CAdESVerifier
tstCertsAndCRLs	`6`	Supported by: CAdESVerifier
tstArchive	`7`	Archive timestamp. Supported by: CAdESVerifier, OfficeVerifier, SOAPVerifier, XAdESVerifier
tstArchive2	`8`	Archive v2 timestamp. Supported by: CAdESVerifier
tstArchive3	`9`	Archive v3 timestamp. Supported by: CAdESVerifier
tstIndividualDataObjects	`10`	Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstAllDataObjects	`11`	Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstSignature	`12`	Signature timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstRefsOnly	`13`	RefsOnly timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstSigAndRefs	`14`	SigAndRefs timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

TSAName
String

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

ValidationLog
String

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

ValidationResult
TsbxSignatureValidities

Contains timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

Constructors

constructor Create();

Creates a new TimestampInfo object with default field values.

TLSSettings Type

A container for TLS connection settings.

Remarks

TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

AutoValidateCertificates
Boolean

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

BaseConfiguration
TsbxSecureTransportPredefinedConfigurations

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Ciphersuites
String

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

ECCurves
String

Defines the elliptic curves to enable.

Extensions
String

Provides access to TLS extensions.

ForceResumeIfDestinationChanges
Boolean

Whether to force TLS session resumption when the destination address changes.

PreSharedIdentity
String

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedKey
String

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

PreSharedKeyCiphersuite
String

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

RenegotiationAttackPreventionMode
TsbxRenegotiationAttackPreventionModes

Selects renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

RevocationCheck
TsbxRevocationCheckKinds

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

SSLOptions
Integer

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send handshake message as large batches rather than individually

TLSMode
TsbxSSLModes

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, allow plain data.

UseExtendedMasterSecret
Boolean

Enables Extended Master Secret Extension, as defined in RFC 7627.

UseSessionResumption
Boolean

Enables or disables TLS session resumption capability.

Versions
Integer

Th SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

constructor Create();

Creates a new TLSSettings object.

Config Settings (JAdESVerifier Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

JAdESVerifier Config Settings

CertThumbprint: Specifies the certificate thumbprint.

The certificate thumbprint that was included into the signature.

CertURL: Specifies the certificate URL.

The certificate URL that was included or to be included into the signature.

The certificate URL is the "x5u" (X.509 URL) Header Parameter that refers to a resource for the X.509 public key certificate or certificate chain corresponding to the key used to digitally sign the JWS or JAdES.

DataBase64: Specifies whether data is Base64-URL-encoded.

This property controls the "b64" header parameter and it determines the representation of the JWS payload or object data. Its value must be the same for all signatures if there are multiple of them in the JSON.

If the value is set to "true", the JWS payload will be represented as a Base64-URL-encoded string.

If the value is "false", the JWS payload will be represented without any encoding.

The default value of this property is "true".

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

IgnoreOCSPNoCheckExtension: Whether OCSP NoCheck extension should be ignored.

Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows to emulate the verifying environment without actually changing its security settings.

KeyId: Specifies Key ID.

The Key ID that was included or to be included into the signature.

Key ID is a hint indicating which key was used to secure the JWS or JAdES.

PolicyDescription: signature policy description.

This property specifies the Description of the signature policy.

PolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyUNNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

ProductionPlace: Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the component to publish 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

ProtectedHeader: Specifies the protected header.

The protected header that was included or to be included into the signature.

PSSUsed: Whether RSASSA-PSS mode was used.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations.

SignerAttrs: Identifies the signer attributes.

The signer attributes in JSON format that was included or to be included into the signature.

SignerCommitments: Identifies the signer commitments.

The signer commitments in JSON format that was included or to be included into the signature.

ThumbprintHashAlgorithm: Specifies the thumbprint hash algorithm.

The certificate thumbprint hash algorithm that was included or to be included into the signature.

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via TLSClientChain property. Note that the component may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

CA, revocation source, TLS key usage requirements are not mandated
Violation of OCSP issuer requirements are ignored
AuthorityKeyID extension in CRL and certificate issuing CAs are ignored (helps with incorrectly renewed certificates)
Basic constraints and name constraints of CA certificates are ignored
Some weaker algorithms are tolerated

UnprotectedHeader: Specifies the unprotected header.

The unprotected header that was included or to be included into the signature.

UseMicrosoftCTL: Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the component.

Supported values are:


off		No caching (default)
local		Local caching (supported for HTTPClient, RESTClient and SOAPClient only)
global		Global caching

Cookies: Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the component. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the component is set to "local", the property returns/restores the rules from/to the internal storage of the component. If StaticDNS of the component is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (JAdESVerifier Component)

JAdESVerifier Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)
53477377   Input file does not exist (SB_ERROR_JADES_INPUTFILE_NOT_EXISTS)


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Component is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
	53477377 Input file does not exist (`SB_ERROR_JADES_INPUTFILE_NOT_EXISTS`)