SymmetricCrypto Component

Properties   Methods   Events   Config Settings   Errors  

The SymmetricCrypto component supports encrypting and decrypting messages.

Syntax

TsbxSymmetricCrypto

Remarks

SymmetricCrypto allows you to encrypt and decrypt messages.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AssociatedData Property (SymmetricCrypto Component)

Provides Associated Data for AEAD algorithms.

Syntax

property AssociatedData: TBytes read get_AssociatedData write set_AssociatedData;

Remarks

Use this property to set up Associated Data for AEAD encryption algorithms.

This property is not available at design time.

BlockSize Property (SymmetricCrypto Component)

The block size of the chosen symmetric cipher.

Syntax

property BlockSize: Integer read get_BlockSize;

Default Value

0

Remarks

This property returns the block size of the chosen symmetric cipher.

Modern symmetric algorithms typically use blocks of 16 bytes. Some older algorithms, such as DES or Blowfish, use 8-byte blocks.

This property is read-only.

EncryptionAlgorithm Property (SymmetricCrypto Component)

The encryption algorithm to use for encrypting the data.

Syntax

property EncryptionAlgorithm: String read get_EncryptionAlgorithm write set_EncryptionAlgorithm;

Default Value

'AES256'

Remarks

This property specifies the base symmetric algorithm to use (e.g. AES128). Use it in conjunction with Mode to set up the complete encryption scheme (such as AES128-CBC or AES128-GCM).

FIPSMode Property (SymmetricCrypto Component)

Reserved.

Syntax

property FIPSMode: Boolean read get_FIPSMode write set_FIPSMode;

Default Value

false

Remarks

This property is reserved for future use.

HashAlgorithm Property (SymmetricCrypto Component)

The hash algorithm to use during encryption.

Syntax

property HashAlgorithm: String read get_HashAlgorithm write set_HashAlgorithm;

Default Value

'SHA256'

Remarks

Use this property to provide the hash algorithm to be used with the encryption operation. This only applies to certain encryption algorithms/modes.

InputEncoding Property (SymmetricCrypto Component)

The encoding to apply to the input data.

Syntax

property InputEncoding: TsbxCryptoEncodingTypes read get_InputEncoding write set_InputEncoding;

TsbxCryptoEncodingTypes = (
  cetDefault,
  cetBinary,
  cetBase64,
  cetCompact,
  cetJSON
);

Default Value

cetDefault

Remarks

Key Property (SymmetricCrypto Component)

The key to use for the cryptographic operation.

Syntax

property Key: TsbxCryptoKey read get_Key write set_Key;

Remarks

Use this property to provide the symmetric key to use for the cryptographic operation. Remember that this key should be of appropriate type and length, and any required additional settings (such as IV or Nonce) should be adjusted where appropriate.

This property is not available at design time.

Please refer to the CryptoKey type for a complete list of fields.

KeySize Property (SymmetricCrypto Component)

Returns the cryptographic key size in bytes.

Syntax

property KeySize: Integer read get_KeySize;

Default Value

0

Remarks

Use this property to read the cryptographic key size. For the majority of the symmetric algorithms this is hard-coded in the algorithm itself (such as 16 bytes for AES128), but may be variable for certain exceptions, such as Blowfish or RC4.

This property is read-only.

MACAlgorithm Property (SymmetricCrypto Component)

The (H)MAC algorithm to use during encryption.

Syntax

property MACAlgorithm: String read get_MACAlgorithm write set_MACAlgorithm;

Default Value

''

Remarks

Use this property to configure the HMAC algorithm to use with the encryption operation. This only applies to a small subset of algorithms/modes.

Mode Property (SymmetricCrypto Component)

Specifies the symmetric cipher mode of operation.

Syntax

property Mode: TsbxSymmetricCryptoModes read get_Mode write set_Mode;

TsbxSymmetricCryptoModes = (
  scmDefault,
  scmECB,
  scmCBC,
  scmCTR,
  scmCFB8,
  scmGCM,
  scmCCM,
  scmPoly1305
);

Default Value

scmDefault

Remarks

Use this property to specify the mode of operation as required by your environment. The default setting is CBC.

Nonce Property (SymmetricCrypto Component)

Specifies the Nonce value to employ.

Syntax

property Nonce: TBytes read get_Nonce write set_Nonce;

Remarks

Use this property to specify the Nonce value for the symmetric operation. Not every algorithm or mode uses nonce.

This property is not available at design time.

OutputEncoding Property (SymmetricCrypto Component)

The encoding to apply to the output data.

Syntax

property OutputEncoding: TsbxCryptoEncodingTypes read get_OutputEncoding write set_OutputEncoding;

TsbxCryptoEncodingTypes = (
  cetDefault,
  cetBinary,
  cetBase64,
  cetCompact,
  cetJSON
);

Default Value

cetDefault

Remarks

Padding Property (SymmetricCrypto Component)

The padding type to apply to the encrypted data.

Syntax

property Padding: TsbxSymmetricCryptoPaddings read get_Padding write set_Padding;

TsbxSymmetricCryptoPaddings = (
  scpNone,
  scpPKCS5,
  scpANSIX923
);

Default Value

scpPKCS5

Remarks

Use this property to specify the padding type to use with the encrypted data. A padding type commonly used in modern security environments is PKCS#5.

PayloadSize Property (SymmetricCrypto Component)

Specifies the payload size, in bytes.

Syntax

property PayloadSize: Integer read get_PayloadSize write set_PayloadSize;

Default Value

0

Remarks

Use this property to specify the size of the input data in bytes. This is only used by a subset of algorithms/modes, such as CCM.

StreamCipher Property (SymmetricCrypto Component)

Returns true if the selected algorithms works as a stream cipher.

Syntax

property StreamCipher: Boolean read get_StreamCipher;

Default Value

false

Remarks

This property returns true if the selected algorithm processes data as a stream (byte-by-byte), rather than block-by-block. This affects the need to use a proper padding settings.

This property is read-only and not available at design time.

TagSize Property (SymmetricCrypto Component)

Specifies the AEAD tag size, in bytes.

Syntax

property TagSize: Integer read get_TagSize write set_TagSize;

Default Value

16

Remarks

Use this property to specify/customize the tag size for AEAD encryption.

Config Method (SymmetricCrypto Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Decrypt Method (SymmetricCrypto Component)

Decrypts a buffer.

Syntax

function Decrypt(Buffer: TBytes): TBytes;

Remarks

Use this method to decrypt a byte array and get the encrypted message in another byte array.

Specify the decryption key in Key property.

DecryptFile Method (SymmetricCrypto Component)

Decrypts a file.

Syntax

procedure DecryptFile(SourceFile: String; DestFile: String);

Remarks

Use this method to decrypt an encrypted file and save the decrypted data to another file.

Specify the decryption key in Key property before calling this method.

DecryptFinal Method (SymmetricCrypto Component)

Finalization of decryption by blocks.

Syntax

function DecryptFinal(): TBytes;

Remarks

Use this method to finalize of decryption by blocks.

Specify decryption key in Key property.

DecryptInit Method (SymmetricCrypto Component)

Initializes a per-block decryption process.

Syntax

procedure DecryptInit();

Remarks

Use this method to start a block-by-block decryption process.

Specify the decryption key in Key property before starting the decryption.

DecryptStream Method (SymmetricCrypto Component)

Decrypts a stream.

Syntax

procedure DecryptStream(SourceStream: TStream; DestStream: TStream);

Remarks

Use this method to decrypt a stream and save the decrypted message to another stream.

Specify the decryption key in Key property before commencing the decryption.

DecryptUpdate Method (SymmetricCrypto Component)

Decrypts the next block of encrypted data.

Syntax

function DecryptUpdate(Buffer: TBytes): TBytes;

Remarks

When using block-by-block decryption, pass every subsequent block of the encrypted message to this method until the entire message is processed. For each encrypted block the method returns a piece of decrypted data.

Please note that in general case there is no direct correspondence between the data actually contained in the encrypted block with the output of this method. The component may choose to cache a piece of the provided buffer internally if it doesn't constitute a full block of encrypted data.

Remember to call DecryptInit before calling this method to prepare the control for the decryption process.

DoAction Method (SymmetricCrypto Component)

Performs an additional action.

Syntax

function DoAction(ActionID: String; ActionParams: String): String;

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Encrypt Method (SymmetricCrypto Component)

Encrypts a buffer.

Syntax

function Encrypt(Buffer: TBytes): TBytes;

Remarks

Use this method to encrypt a byte array and get the protected message in another byte array.

Specify the encryption key in Key property before calling this method.

This is a one-off encryption method. Don't use it with granular per-block methods (EncryptInit, EncryptUpdate, EncryptFinal).

EncryptFile Method (SymmetricCrypto Component)

Encrypts a file.

Syntax

procedure EncryptFile(SourceFile: String; DestFile: String);

Remarks

Use this method to encrypt a file and save the protected message in another file.

Specify the encryption key in Key property before commencing encryption.

EncryptFinal Method (SymmetricCrypto Component)

Finalization of encryption by blocks.

Syntax

function EncryptFinal(): TBytes;

Remarks

Use this method to finalize of encryption by blocks.

Specify encryption key in Key property.

EncryptInit Method (SymmetricCrypto Component)

Initializes a per-block encryption process.

Syntax

procedure EncryptInit();

Remarks

Use this method to initialize a block-by-block encryption process. Follow it with calls to EncryptUpdate (as many as needed), and complete the encryption with an EncryptFinal call.

Specify the encryption key in Key property before calling this method.

EncryptStream Method (SymmetricCrypto Component)

Encrypts a stream.

Syntax

procedure EncryptStream(SourceStream: TStream; DestStream: TStream);

Remarks

Use this method to encrypt a stream and save the protected message into another stream.

Specify the encryption key in the Key property before calling this method.

This is a one-off encryption method. Don't use it together with granular per-block encryption methods such as EncryptInit, EncryptUpdate, and EncryptFinal.

EncryptUpdate Method (SymmetricCrypto Component)

Encrypts the next block of data.

Syntax

function EncryptUpdate(Buffer: TBytes): TBytes;

Remarks

Use this method to encrypt the next block of data contained in Buffer.

Call this method after calling EncryptInit for as many times as needed, until the whole volume of data is processed. Having done that, call EncryptFinal to complete the encryption and get the terminating encrypted trailer.

Error Event (SymmetricCrypto Component)

Reports errors during encryption or decryption.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

component fires this event in case of exceptional conditions during a cryptographic operation.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (SymmetricCrypto Component)

This event notifies the application about an underlying control flow event.

Syntax

type TNotificationEvent = procedure (
  Sender: TObject;
  const EventID: String;
  const EventParam: String
) of Object;

property OnNotification: TNotificationEvent read FOnNotification write FOnNotification;

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

Progress Event (SymmetricCrypto Component)

Reports the data encryption/decryption progress.

Syntax

type TProgressEvent = procedure (
  Sender: TObject;
  Total: Int64;
  Current: Int64;
  var Cancel: Boolean
) of Object;

property OnProgress: TProgressEvent read FOnProgress write FOnProgress;

Remarks

This event fires periodically during a file encrypt/decrypt operation to report its progress.

Use the Cancel parameter to terminate the encryption/decryption if needed.

CryptoKey Type

This container represents a cryptographic key.

Remarks

This type is a universal placeholder for cryptographic keys.

Fields

Constructors

>

constructor Create();

Creates an empty crypto key object.

Config Settings (SymmetricCrypto Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

SymmetricCrypto Config Settings

Base Config Settings

Trappable Errors (SymmetricCrypto Component)

SymmetricCrypto Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)