XAdESVerifier Component

Properties Methods Events Configuration Settings Errors

The XAdESVerifier component verifies XAdES-compliant signatures.

Syntax

TsbxXAdESVerifier

Remarks

Use this control to validate XAdES signatures.

Property List

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.


AllSignaturesValid	The cumulative validity of all signatures.
BlockedCertificates	The certificates that must be rejected as trust anchors.
CanonicalizationMethod	The XML canonicalization method that was used for signing.
Certificates	A collection of certificates included in the electronic signature.
ChainValidationDetails	The details of a certificate chain validation outcome.
ChainValidationResult	The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.
ClaimedSigningTime	Returns a signature's claimed signing time.
CRLs	A collection of certificate revocation lists embedded into the signature by the signer.
CurrentCACertificate	The CA of the currently processed certificate.
CurrentCertificate	The certificate that is currently being processed.
DataFile	A file containing the external data covered by a detached signature.
Encoding	Specifies XML encoding.
FIPSMode	Reserved.
HashAlgorithm	The hash algorithm used for signing.
IgnoreChainValidationErrors	Makes the component tolerant to chain validation errors.
InputBytes	Use this property to pass the input to component in the byte array form.
InputFile	A path to the signed XML file.
InterimValidationDetails	Contains the validation details of the moment.
InterimValidationResult	Contains the validation status of the moment.
KnownCertificates	Additional certificates for chain validation.
KnownCRLs	Additional CRLs for chain validation.
KnownOCSPs	Additional OCSP responses for chain validation.
LastArchivalTime	Indicates the most recent archival time of an archived signature.
OCSPs	A collection of OCSP responses embedded into the signature.
OfflineMode	Switches the component to the offline mode.
OutputBytes	Use this property to read the output the component object has produced.
OutputFile	The file where the modified signed document will be saved.
Profile	Specifies a pre-defined profile to apply when creating the signature.
Proxy	The proxy server settings.
Qualified	Indicates a qualified electronic signature.
References	References covered by the signature.
RevocationCheck	Specifies the kind(s) of revocation check to perform.
SignatureBytes	TBD.
SignatureValidationResult	Contains the signature validation result.
SigningCertificate	The certificate of the signature creator.
SocketSettings	Manages network connection settings.
Timestamp	Contains the timestamp which is being validated.
Timestamped	Indicates whether or not the signature is timestamped.
TLSClientChain	The TLS client certificate chain.
TLSServerChain	The TLS server's certificate chain.
TLSSettings	Manages TLS layer settings.
TrustedCertificates	A list of trusted certificates for chain validation.
TSACertificate	The certificate of the Time Stamping Authority.
ValidatedSigningTime	Contains the certified signing time.
ValidationLog	Contains the complete log of the certificate validation routine.
ValidationMoment	The time point at which signature validity is to be established.
XAdESEnabled	Specifies whether the document contains an advanced signature (XAdES).
XAdESForm	Specifies which form of XAdES has been used.
XAdESVersion	Specifies XAdES version.
XMLElement	Specifies the XML element containing the signature.
XPathNamespaces	Specifies namespaces for the XPath expression.

Method List

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.


AddTimestamp	Use this method to add an timestamp.
AddTimestampValidationData	Use this method to add timestamp validation data to the signature.
AddValidationDataRefs	Use this method to add signature validation references to the signature.
AddValidationDataValues	Use this method to add signature validation values to the signature.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
Verify	Verifies a signed XML document.
VerifyDetached	Verifies a detached signature over external XML data.

Event List

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.


ChainElementDownload	TBD.
ChainElementNeeded	TBD.
ChainValidated	Reports the end of the validation process.
Error	Information about errors during signature verification.
Notification	This event notifies the application about an underlying control flow event.
ReferenceValidated	Marks the end of a reference validation.
ResolveReference	Asks the application to resolve a reference.
RetrieveCertificate	This event is fired when a certificate should be retrieved.
RetrieveCRL	This event is fired when a CRL should be retrieved.
RetrieveOCSPResponse	This event is fired when a OCSP Response should be retrieved.
SignatureFound	Signifies the start of signature validation.
SignatureValidated	Reports the signature validation result.
StoreCertificate	This event is fired when a certificate should be stored along with a signature.
StoreCRL	This event is fired when a CRL should be stored along with a signature.
StoreOCSPResponse	This event is fired when a OCSP Response should be stored along with a signature.
TimestampFound	Signifies the start of a timestamp validation routine.
TimestampValidated	Reports the completion of the timestamp validation routine.
TLSCertValidate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
ValidationProgress	TBD.

Configuration Settings

The following is a list of configuration settings for the component with short descriptions. Click on the links for further details.


ClaimedRoleText	The text of the claimed role.
ClaimedRoleXML	The XML content of the claimed roles.
CommitmentTypeIndicationAllSignedDataObjects[Index]	Specifies the CommitmentTypeIndication's AllSignedDataObjects.
CommitmentTypeIndicationCount	The number of the CommitmentTypeIndication elements.
CommitmentTypeIndicationIdentifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.
CommitmentTypeIndicationIdentifierDescription[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.
CommitmentTypeIndicationIdentifierDocumentationReferences[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.
CommitmentTypeIndicationIdentifierQualifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.
CommitmentTypeIndicationObjectReference[Index]	Specifies the CommitmentTypeIndication's ObjectReference.
CommitmentTypeIndicationQualifiersXML[Index]	The XML content of the CommitmentTypeIndication's Qualifiers.
CustomTSLs	Specifies the custom TSLs.
DataObjectFormatCount	The number of the DataObjectFormat elements.
DataObjectFormatDescription[Index]	Specifies the DataObjectFormat's Description.
DataObjectFormatEncoding[Index]	Specifies the DataObjectFormat's Encoding.
DataObjectFormatMimeType[Index]	Specifies the DataObjectFormat's MimeType.
DataObjectFormatObjectIdentifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Identifier.
DataObjectFormatObjectIdentifierDescription[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Description.
DataObjectFormatObjectIdentifierDocumentationReferences[Index]	Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.
DataObjectFormatObjectIdentifierQualifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.
DataObjectFormatObjectReference[Index]	Specifies the DataObjectFormat's ObjectReference.
DataType	Specifies the external data type.
DetachedResourceURI	Specifies a detached resource URI.
ForceCompleteChainValidation	Whether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriod	Specifies a grace period to apply during revocation information checks.
HMACKey	The key value for HMAC.
HMACSigningUsed	Whether HMAC signing was used.
IDAttributeName	Specifies the custom name of ID attribute.
IDAttributeNamespaceURI	Specifies the custom namespace URI of ID attribute.
IgnoreOCSPNoCheckExtension	Whether OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
IncludeKnownRevocationInfoToSignature	Whether to include custom revocation info to the signature.
InclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList.
KeyName	Identifies the key.
ManifestCount	The number of the manifest elements.
ManifestID[Index]	The ID of the manifest element.
ManifestObjectIndex[Index]	The object element index to which the manifest element belongs.
ManifestXML[Index]	The XML content of the manifest element.
ObjectCount	The number of the object elements.
ObjectEncoding[Index]	The Encoding of the object element.
ObjectID[Index]	The ID of the object element.
ObjectMimeType[Index]	The MIME type of the object element.
ObjectXML[Index]	The XML content of the object element.
ProductionPlace	Identifies the place of the signature production.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
PSSUsed	Whether RSASSA-PSS mode was used.
QualifiedStatus	Indicates a qualified electronic signature.
RemoveSignature	Whether to remove signature.
SignatureCompliance	SIgnature compliance with XMLDSig/EBICS.
SignatureID	Contains the ID for Signature element.
SignaturePropertiesCount	The number of the signature properties elements.
SignaturePropertiesID[Index]	The ID of the signature properties element.
SignaturePropertiesObjectIndex[Index]	The object element index to which the signature properties element belongs.
SignaturePropertiesXML[Index]	The XML content of the signature properties element.
SignaturePropertyCount	The number of the signature property elements.
SignaturePropertyID[Index]	The ID of the signature properties element.
SignaturePropertyPropertiesIndex[Index]	The signature properties element index to which the signature property element belongs.
SignaturePropertyTarget[Index]	The Target of the signature properties element.
SignaturePropertyXML[Index]	The XML content of the signature property element.
SigPolicyDescription	signature policy description.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyHash	The hash value of the signature policy.
SigPolicyHashAlgorithm	The hash algorithm used to compute the signature policy hash.
SigPolicyID	Identifies the signature policy.
SigPolicyNoticeNumbers	Contains user notice numbers.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyURI	Signature policy URI.
TempPath	Location where the temporary files are stored.
TimestampCanonicalizationMethod	Specifies canonicalization method used in timestamp.
TimestampValidationDataDetails	Specifies timestamp validation data details to include to the signature.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
TSLDistributionPoints	Contains XML content of distribution points of the TSL used.
TSLDistributionPoints[Idx]	Contains distribution point of the specified index of the TSL used.
TSLHistoricalInformationPeriod	Contains historical information period of the TSL used.
TSLLegalNotices	Contains XML content of legal notices of the TSL used.
TSLLegalNotices[lang]	Contains legal notices for the specified language of the TSL used.
TSLListIssueDateTime	Contains list issue date and time of the TSL used.
TSLNextUpdate	Contains next update date and time of the TSL used.
TSLPolicies	Contains XML content of policies of the TSL used.
TSLPolicies[lang]	Contains policies for the specified language of the TSL used.
TSLSchemeExtensions	Contains XML content of scheme extensions of the TSL used.
TSLSchemeExtensions[Idx]	Contains XML content of scheme extension of the specified index of the TSL used.
TSLSchemeInformationURI	Contains XML content of scheme information URI of the TSL used.
TSLSchemeInformationURI[lang]	Contains scheme information URI for the specified language of the TSL used.
TSLSchemeName	Contains XML content of scheme name of the TSL used.
TSLSchemeName[lang]	Contains scheme name for the specified language of the TSL used.
TSLSchemeOperatorAddress	Contains XML content of scheme operator address of the TSL used.
TSLSchemeOperatorName	Contains XML content of scheme operator name of the TSL used.
TSLSchemeOperatorName[lang]	Contains scheme operator name for the specified language of the TSL used.
TSLSchemeTerritory	Contains scheme territory of the TSL used.
TSLSchemeTypeCommunityRules	Contains XML content of scheme type/community/rules of the TSL used.
TSLSchemeTypeCommunityRules[lang]	Contains scheme type/community/rules for the specified language of the TSL used.
TSLSequenceNumber	Contains sequence number of the TSL used.
TSLsRetrieveLog	Contains the complete log of the TSLs retrieve.
TSLStatusDeterminationApproach	Contains status determination approach of the TSL used.
TSLsValidationLog	Contains the complete log of the TSLs validation.
TSLTSPAdditionalServiceInformation	Contains addtional service information of the TSP service used.
TSLTSPAddress	Contains XML content of the address of the TSP used.
TSLTSPHistoryInstance	Indicates that TSP service history instance used.
TSLTSPHistoryInstanceAdditionalServiceInformation	Contains addtional service information of the TSP service history instance used.
TSLTSPHistoryInstanceQualifiers	Contains list of qualifiers of the TSP service history instance used.
TSLTSPHistoryInstanceServiceInformationExtensions	Contains XML content of information extensions of the TSP service history instance used.
TSLTSPHistoryInstanceServiceInformationExtensions[Idx]	Contains XML content of information extension of the specified index of the TSP service history instance used.
TSLTSPHistoryInstanceServiceName	Contains XML content of name of the TSP service history instance used.
TSLTSPHistoryInstanceServiceName[lang]	Contains name for the specified language of the TSP service history instance used.
TSLTSPHistoryInstanceServiceStatus	Contains status of the TSP service history instance used.
TSLTSPHistoryInstanceServiceStatusStartingTime	Contains status starting time of the TSP service history instance used.
TSLTSPHistoryInstanceServiceTypeIdentifier	Contains type identifier of the TSP service history instance used.
TSLTSPHistoryInstanceXML	Contains XML content of the TSP service history instance used.
TSLTSPInformationExtensions	Contains XML content of information extensions of the TSP used.
TSLTSPInformationExtensions[Idx]	Contains XML content of information extension of the specified index of the TSP used.
TSLTSPInformationURI	Contains XML content of information URI of the TSP used.
TSLTSPInformationURI[lang]	Contains information URI for the specified language of the TSP used.
TSLTSPName	Contains XML content of name of the TSP used.
TSLTSPName[lang]	Contains name for the specified language of the TSP used.
TSLTSPSchemeServiceDefinitionURI	Contains XML content of scheme service definition URI of the TSP service used.
TSLTSPSchemeServiceDefinitionURI[lang]	Contains scheme service definition URI for the specified language of the TSP service used.
TSLTSPServiceDefinitionURI	Contains XML content of definition URI of the TSP service used.
TSLTSPServiceDefinitionURI[lang]	Contains definition URI for the specified language of the TSP service used.
TSLTSPServiceInformationExtensions	Contains XML content of information extensions of the TSP service used.
TSLTSPServiceInformationExtensions[Idx]	Contains XML content of information extension of the specified index of the TSP service used.
TSLTSPServiceName	Contains XML content of name of the TSP service used.
TSLTSPServiceName[lang]	Contains name for the specified language of the TSP service used.
TSLTSPServiceQualifiers	Contains list of qualifiers of the TSP service used.
TSLTSPServiceStatus	Contains status of the TSP service used.
TSLTSPServiceStatusStartingTime	Contains status starting time of the TSP service used.
TSLTSPServiceSupplyPoints	Contains XML content of the supply points of the TSP service used.
TSLTSPServiceTypeIdentifier	Contains type identifier of the TSP service used.
TSLTSPServiceXML	Contains XML content of the TSP service used.
TSLTSPTradeName	Contains XML content of trade name of the TSP used.
TSLTSPTradeName[lang]	Contains trade name for the specified language of the TSP used.
TSLTSPXML	Contains XML content of the TSP used.
TSLType	Contains TSL type of the TSL used.
TSLVersionIdentifier	Contains version identifier of the TSL used.
TSLXML	Contains XML content of the TSL used.
TspHashAlgorithm	Sets a specific hash algorithm for use with the timestamping service.
UseDefaultTSLs	Enables or disables the use of the default TSLs.
UseMicrosoftCTL	Enables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificates	Enables or disables the use of the system certificates.
ValidationDataRefsDetails	Specifies validation data references details to include to the signature.
ValidationDataValuesDetails	Specifies validation data values details to include to the signature.
WriteBOM	Specifies whether byte-order mark should be written when saving the document.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
Tag	Allows to store any custom data.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

AllSignaturesValid Property (XAdESVerifier Component)

The cumulative validity of all signatures.

Syntax

property AllSignaturesValid: Boolean read get_AllSignaturesValid;

Default Value

false

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

BlockedCertificates Property (XAdESVerifier Component)

The certificates that must be rejected as trust anchors.

Syntax

property BlockedCertificates: TsbxCertificateList read get_BlockedCertificates write set_BlockedCertificates;

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

This property is not available at design time.

CanonicalizationMethod Property (XAdESVerifier Component)

The XML canonicalization method that was used for signing.

Syntax

property CanonicalizationMethod: TsbxXMLCanonicalizationMethods read get_CanonicalizationMethod;

TsbxXMLCanonicalizationMethods = (
  cxcmNone,

  cxcmCanon,

  cxcmCanonComment,

  cxcmExclCanon,

  cxcmExclCanonComment,

  cxcmMinCanon,

  cxcmCanon_v1_1,

  cxcmCanonComment_v1_1

);

Default Value

cxcmNone

Remarks

Use this property to get the XML canonicalization method used for SignedInfo element. See XML-Signature Syntax and Processing specification for details.

Supported canonicalization methods:


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

This property is read-only and not available at design time.

Certificates Property (XAdESVerifier Component)

A collection of certificates included in the electronic signature.

Syntax

property Certificates: TsbxCertificateList read get_Certificates;

Remarks

Use this property to access all certificates included into the signature(s) by its creator.

This property is read-only and not available at design time.

ChainValidationDetails Property (XAdESVerifier Component)

The details of a certificate chain validation outcome.

Syntax

property ChainValidationDetails: Integer read get_ChainValidationDetails;

Default Value

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

ChainValidationResult Property (XAdESVerifier Component)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Syntax

property ChainValidationResult: TsbxChainValidities read get_ChainValidationResult;

TsbxChainValidities = (
  cvtValid,

  cvtValidButUntrusted,

  cvtInvalid,

  cvtCantBeEstablished

);

Default Value

cvtValid

Remarks

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

ClaimedSigningTime Property (XAdESVerifier Component)

Returns a signature's claimed signing time.

Syntax

property ClaimedSigningTime: String read get_ClaimedSigningTime;

Default Value

Remarks

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by the signature and may be forfeited or wrong. Use ValidatedSigningTime to obtain the signing time figure verified by a trusted timestamping authority. The time is in UTC.

This property is read-only and not available at design time.

CRLs Property (XAdESVerifier Component)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax

property CRLs: TsbxCRLList read get_CRLs;

Remarks

Use this property to access the CRLs embedded into the signature by the signer.

This property is read-only and not available at design time.

CurrentCACertificate Property (XAdESVerifier Component)

The CA of the currently processed certificate.

Syntax

property CurrentCACertificate: TsbxCertificate read get_CurrentCACertificate;

Remarks

The validator component uses this property to publish the issuer certificate of the certificate that is currently being processed, if it is available.

This property is read-only and not available at design time.

CurrentCertificate Property (XAdESVerifier Component)

The certificate that is currently being processed.

Syntax

property CurrentCertificate: TsbxCertificate read get_CurrentCertificate;

Remarks

This property returns the certificate that is currently being processed by the validator.

This property is read-only and not available at design time.

DataFile Property (XAdESVerifier Component)

A file containing the external data covered by a detached signature.

Syntax

property DataFile: String read get_DataFile write set_DataFile;

Default Value

Remarks

In the case of a detached signature, use this property to provide the external data to the component from a file. Alternatively, provide the data via DataStream.

Encoding Property (XAdESVerifier Component)

Specifies XML encoding.

Syntax

property Encoding: String read get_Encoding write set_Encoding;

Default Value

Remarks

Use this property to specify the encoding to apply to the XML documents.

FIPSMode Property (XAdESVerifier Component)

Reserved.

Syntax

property FIPSMode: Boolean read get_FIPSMode write set_FIPSMode;

Default Value

false

Remarks

This property is reserved for future use.

HashAlgorithm Property (XAdESVerifier Component)

The hash algorithm used for signing.

Syntax

property HashAlgorithm: String read get_HashAlgorithm;

Default Value

'Unknown'

Remarks

Use this property to check which hash algorithm was used.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

This property is read-only and not available at design time.

IgnoreChainValidationErrors Property (XAdESVerifier Component)

Makes the component tolerant to chain validation errors.

Syntax

property IgnoreChainValidationErrors: Boolean read get_IgnoreChainValidationErrors write set_IgnoreChainValidationErrors;

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (XAdESVerifier Component)

Use this property to pass the input to component in the byte array form.

Syntax

property InputBytes: TBytes read get_InputBytes write set_InputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

InputFile Property (XAdESVerifier Component)

A path to the signed XML file.

Syntax

property InputFile: String read get_InputFile write set_InputFile;

Default Value

Remarks

Provide the path to the XML document to verify.

InterimValidationDetails Property (XAdESVerifier Component)

Contains the validation details of the moment.

Syntax

property InterimValidationDetails: Integer read get_InterimValidationDetails write set_InterimValidationDetails;

Default Value

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity details mid-flight.

The value of this property is a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is not available at design time.

InterimValidationResult Property (XAdESVerifier Component)

Contains the validation status of the moment.

Syntax

property InterimValidationResult: TsbxChainValidities read get_InterimValidationResult write set_InterimValidationResult;

TsbxChainValidities = (
  cvtValid,

  cvtValidButUntrusted,

  cvtInvalid,

  cvtCantBeEstablished

);

Default Value

cvtValid

Remarks

Use this property to check the interim validity status mid-flight.


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

This property is not available at design time.

KnownCertificates Property (XAdESVerifier Component)

Additional certificates for chain validation.

Syntax

property KnownCertificates: TsbxCertificateList read get_KnownCertificates write set_KnownCertificates;

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of certificates to be added to this collection is roughly equivalent to that of Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

This property is not available at design time.

KnownCRLs Property (XAdESVerifier Component)

Additional CRLs for chain validation.

Syntax

property KnownCRLs: TsbxCRLList read get_KnownCRLs write set_KnownCRLs;

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

This property is not available at design time.

KnownOCSPs Property (XAdESVerifier Component)

Additional OCSP responses for chain validation.

Syntax

property KnownOCSPs: TsbxOCSPResponseList read get_KnownOCSPs write set_KnownOCSPs;

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

This property is not available at design time.

LastArchivalTime Property (XAdESVerifier Component)

Indicates the most recent archival time of an archived signature.

Syntax

property LastArchivalTime: String read get_LastArchivalTime;

Default Value

Remarks

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (CAdES-A) signatures.

This property is read-only and not available at design time.

OCSPs Property (XAdESVerifier Component)

A collection of OCSP responses embedded into the signature.

Syntax

property OCSPs: TsbxOCSPResponseList read get_OCSPs;

Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

This property is read-only and not available at design time.

OfflineMode Property (XAdESVerifier Component)

Switches the component to the offline mode.

Syntax

property OfflineMode: Boolean read get_OfflineMode write set_OfflineMode;

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (XAdESVerifier Component)

Use this property to read the output the component object has produced.

Syntax

property OutputBytes: TBytes read get_OutputBytes;

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

OutputFile Property (XAdESVerifier Component)

The file where the modified signed document will be saved.

Syntax

property OutputFile: String read get_OutputFile write set_OutputFile;

Default Value

Remarks

Provide the full path to the file where the modified signed document should be saved.

Profile Property (XAdESVerifier Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

property Profile: String read get_Profile write set_Profile;

Default Value

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (XAdESVerifier Component)

The proxy server settings.

Syntax

property Proxy: TsbxProxySettings read get_Proxy;

Remarks

Use this property to tune up the proxy server settings.

This property is read-only.

Qualified Property (XAdESVerifier Component)

Indicates a qualified electronic signature.

Syntax

property Qualified: TsbxQualifiedStatuses read get_Qualified;

TsbxQualifiedStatuses = (
  sqsUnknown,

  sqsNone,

  sqsGranted,

  sqsWithdrawn,

  sqsSetByNationalLaw,

  sqsDeprecatedByNationalLaw,

  sqsRecognizedAtNationalLevel,

  sqsDeprecatedAtNationalLevel,

  sqsUnderSupervision,

  sqsSupervisionInCessation,

  sqsSupervisionCeased,

  sqsSupervisionRevoked,

  sqsAccredited,

  sqsAccreditationCeased,

  sqsAccreditationRevoked,

  sqsInAccordance,

  sqsExpired,

  sqsSuspended,

  sqsRevoked,

  sqsNotInAccordance

);

Default Value

sqsUnknown

Remarks

Use this property to check if an electronic signature is created using a qualified device for creating electronic signatures and that relies on a qualified electronic signature certificate.

Adjust UseDefaultTSLs property and/or CustomTSLs property before validating the signature/certificate to properly obtain TSP (Trust Service Provider) service status. Use Qualified* and TSL* config properties to obtain extended information.

The following qualified statuses are supported:


sqsUnknown	`0`	Qualified status unknown. Use config's QualifiedInfo setting to obtain service status URI.
sqsNone	`1`	None
sqsGranted	`2`	Granted
sqsWithdrawn	`3`	Withdrawn
sqsSetByNationalLaw	`4`	Set by national law
sqsDeprecatedByNationalLaw	`5`	Deprecated by national law
sqsRecognizedAtNationalLevel	`6`	Recognized at national level
sqsDeprecatedAtNationalLevel	`7`	Deprecated at national level
sqsUnderSupervision	`8`	Under supervision
sqsSupervisionInCessation	`9`	Supervision in cessation
sqsSupervisionCeased	`10`	Supervision ceased
sqsSupervisionRevoked	`11`	Supervision revoked
sqsAccredited	`12`	Accredited
sqsAccreditationCeased	`13`	Accreditation ceased
sqsAccreditationRevoked	`14`	Accreditation revoked
sqsInAccordance	`15`	Deprecated. The subject service is in accordance with the scheme's specific status determination criteria (only for use in positive approval schemes).
sqsExpired	`16`	Deprecated. The subject service is no longer overseen by the scheme, e.g. due to nonrenewal or withdrawal by the TSP, or cessation of the service or the scheme's operations.
sqsSuspended	`17`	Deprecated. The subject service's status is temporarily uncertain whilst checks are made by the scheme operator (typically e.g. while a revocation request is being investigated or if action is required to resolve a deficiency in the service fulfilling the scheme's criteria.
sqsRevoked	`18`	Deprecated. The subject service's approved status has been revoked because it is no longer in accordance with the scheme's specific status determination criteria (only for use in positive approval schemes).
sqsNotInAccordance	`19`	Deprecated. The subject service is not in accordance with the scheme's specific status determination criteria (only for use in negative approval schemes).

This property is read-only and not available at design time.

References Property (XAdESVerifier Component)

References covered by the signature.

Syntax

property References: TsbxXMLReferenceList read get_References;

Remarks

Use this property to get the references to the data covered by the signature.

This property is read-only and not available at design time.

RevocationCheck Property (XAdESVerifier Component)

Specifies the kind(s) of revocation check to perform.

Syntax

property RevocationCheck: TsbxRevocationCheckKinds read get_RevocationCheck write set_RevocationCheck;

TsbxRevocationCheckKinds = (
  crcNone,

  crcAuto,

  crcAllCRL,

  crcAllOCSP,

  crcAllCRLAndOCSP,

  crcAnyCRL,

  crcAnyOCSP,

  crcAnyCRLOrOCSP,

  crcAnyOCSPOrCRL

);

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRL) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The 'crcAll*' modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

SignatureBytes Property (XAdESVerifier Component)

TBD.

Syntax

property SignatureBytes: TBytes read get_SignatureBytes;

Remarks

TBD.

This property is read-only and not available at design time.

SignatureValidationResult Property (XAdESVerifier Component)

Contains the signature validation result.

Syntax

property SignatureValidationResult: TsbxXMLSignatureValidities read get_SignatureValidationResult;

TsbxXMLSignatureValidities = (
  xsvValid,

  xsvUnknown,

  xsvCorrupted,

  xsvSignerNotFound,

  xsvFailure,

  xsvReferenceCorrupted

);

Default Value

xsvValid

Remarks

Use this property to check the result of the most recent XML signature validation.


xsvValid	`0`
xsvUnknown	`1`
xsvCorrupted	`2`
xsvSignerNotFound	`3`
xsvFailure	`4`
xsvReferenceCorrupted	`5`

This property is read-only and not available at design time.

SigningCertificate Property (XAdESVerifier Component)

The certificate of the signature creator.

Syntax

property SigningCertificate: TsbxCertificate read get_SigningCertificate;

Remarks

Use this property to access the certificate that was used to create the signature.

This property is read-only and not available at design time.

SocketSettings Property (XAdESVerifier Component)

Manages network connection settings.

Syntax

property SocketSettings: TsbxSocketSettings read get_SocketSettings;

Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Timestamp Property (XAdESVerifier Component)

Contains the timestamp which is being validated.

Syntax

property Timestamp: TsbxTimestampInfo read get_Timestamp;

Remarks

Use this property to access the timestamp which is currently being validated.

This property is read-only and not available at design time.

Timestamped Property (XAdESVerifier Component)

Indicates whether or not the signature is timestamped.

Syntax

property Timestamped: Boolean read get_Timestamped;

Default Value

false

Remarks

This property returns True if the signature is timestamped, and False otherwise.

This property is read-only and not available at design time.

TLSClientChain Property (XAdESVerifier Component)

The TLS client certificate chain.

Syntax

property TLSClientChain: TsbxCertificateList read get_TLSClientChain write set_TLSClientChain;

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the component. Note that the client's end-entity certificate should have a private key associated with it.

This property is not available at design time.

TLSServerChain Property (XAdESVerifier Component)

The TLS server's certificate chain.

Syntax

property TLSServerChain: TsbxCertificateList read get_TLSServerChain;

Remarks

Use this property to access the certificate chain sent by the TLS server.

This property is read-only and not available at design time.

TLSSettings Property (XAdESVerifier Component)

Manages TLS layer settings.

Syntax

property TLSSettings: TsbxTLSSettings read get_TLSSettings;

Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

TrustedCertificates Property (XAdESVerifier Component)

A list of trusted certificates for chain validation.

Syntax

property TrustedCertificates: TsbxCertificateList read get_TrustedCertificates write set_TrustedCertificates;

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same than that of Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

This property is not available at design time.

TSACertificate Property (XAdESVerifier Component)

The certificate of the Time Stamping Authority.

Syntax

property TSACertificate: TsbxCertificate read get_TSACertificate;

Remarks

Use this property to access the certificate of the TSA that produced the timestamp.

Note that in some instances the TSA certificate might be unavailable, even for timestamped documents and signatures.

This property is read-only and not available at design time.

ValidatedSigningTime Property (XAdESVerifier Component)

Contains the certified signing time.

Syntax

property ValidatedSigningTime: String read get_ValidatedSigningTime;

Default Value

Remarks

Use this property to obtain the signing time as certified by an external timestamp. The time is in UTC.

This property is read-only and not available at design time.

ValidationLog Property (XAdESVerifier Component)

Contains the complete log of the certificate validation routine.

Syntax

property ValidationLog: String read get_ValidationLog;

Default Value

Remarks

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only and not available at design time.

ValidationMoment Property (XAdESVerifier Component)

The time point at which signature validity is to be established.

Syntax

property ValidationMoment: String read get_ValidationMoment write set_ValidationMoment;

Default Value

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either signature creation time, or current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

XAdESEnabled Property (XAdESVerifier Component)

Specifies whether the document contains an advanced signature (XAdES).

Syntax

property XAdESEnabled: Boolean read get_XAdESEnabled;

Default Value

false

Remarks

Use this property to check whether the document is signed with XAdES or XML-DSIG only.

This property is read-only and not available at design time.

XAdESForm Property (XAdESVerifier Component)

Specifies which form of XAdES has been used.

Syntax

property XAdESForm: TsbxXAdESForms read get_XAdESForm;

TsbxXAdESForms = (
  xafUnknown,

  xafBasic,

  xafBES,

  xafEPES,

  xafT,

  xafC,

  xafX,

  xafXL,

  xafA,

  xafExtendedBES,

  xafExtendedEPES,

  xafExtendedT,

  xafExtendedC,

  xafExtendedX,

  xafExtendedXLong,

  xafExtendedXL,

  xafExtendedA

);

Default Value

xafUnknown

Remarks

Use this property to check the form (level) of XAdES.


xafUnknown	`0`
xafBasic	`1`	XAdES form, supported by XAdES v1.1.1
xafBES	`2`	XAdES-BES form, supported starting from XAdES v1.2.2
xafEPES	`3`	XAdES-EPES form, supported starting from XAdES v1.2.2
xafT	`4`	XAdES-T form
xafC	`5`	XAdES-C form
xafX	`6`	XAdES-X form
xafXL	`7`	XAdES-X-L form
xafA	`8`	XAdES-A form
xafExtendedBES	`9`	XAdES-E-BES form
xafExtendedEPES	`10`	XAdES-E-EPES form
xafExtendedT	`11`	XAdES-E-T form
xafExtendedC	`12`	XAdES-E-C form
xafExtendedX	`13`	XAdES-E-X form
xafExtendedXLong	`14`	XAdES-E-X-Long form (type 1)
xafExtendedXL	`15`	XAdES-E-X-L form (type 2)
xafExtendedA	`16`	XAdES-E-A form

* XAdES-E-* forms are supported starting from XAdES v1.3.2

This property is read-only and not available at design time.

XAdESVersion Property (XAdESVerifier Component)

Specifies XAdES version.

Syntax

property XAdESVersion: TsbxXAdESVersions read get_XAdESVersion write set_XAdESVersion;

TsbxXAdESVersions = (
  xavUnknown,

  xav111,

  xav122,

  xav132,

  xav141

);

Default Value

xavUnknown

Remarks

This property specifies the version of the XAdES specification used to produce the signature.


xavUnknown	`0`
xav111	`1`	XAdES v1.1.1
xav122	`2`	XAdES v1.2.2
xav132	`3`	XAdES v1.3.2
xav141	`4`	XAdES v1.4.1 (aka v1.4.2)

This property is not available at design time.

XMLElement Property (XAdESVerifier Component)

Specifies the XML element containing the signature.

Syntax

property XMLElement: String read get_XMLElement write set_XMLElement;

Default Value

Remarks

Specifies the XML element that contains the signature to be validated.

Supported values are:


""	an empty string indicates that all signatures will be verified.
"#id"	indicates an XML element with specified Id.
XPointer expression	indicates an XML element selected using XPointer expression. Use XPathNamespaces property to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property
Node name	indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data".

XPathNamespaces Property (XAdESVerifier Component)

Specifies namespaces for the XPath expression.

Syntax

property XPathNamespaces: TsbxXMLNamespaceList read get_XPathNamespaces write set_XPathNamespaces;

Remarks

This property contains a list of prefixes and namespaceURIs that are used in XPath expression with TargetXMLElement property of the references.

This property is not available at design time.

AddTimestamp Method (XAdESVerifier Component)

Use this method to add an timestamp.

Syntax

procedure AddTimestamp(TimestampType: Integer; TimestampServer: String);

Remarks

Call this method to timestamp the signature. Use the TimestampServer parameter to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. This method could be called separately or in SignatureValidated event handler after successful signature validation. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:


tstSignature	`12`	Signature timestamp
tstRefsOnly	`13`	RefsOnly timestamp
tstSigAndRefs	`14`	SigAndRefs timestamp
tstArchive	`7`	Archive timestamp

AddTimestampValidationData Method (XAdESVerifier Component)

Use this method to add timestamp validation data to the signature.

Syntax

procedure AddTimestampValidationData();

Remarks

Call this method to add certificates and revocation information used to validate timestamp's signer certificates at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

AddValidationDataRefs Method (XAdESVerifier Component)

Use this method to add signature validation references to the signature.

Syntax

procedure AddValidationDataRefs();

Remarks

Call this method to add references to certificates and revocation information used to validate a signature at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

AddValidationDataValues Method (XAdESVerifier Component)

Use this method to add signature validation values to the signature.

Syntax

procedure AddValidationDataValues();

Remarks

Call this method to add certificates and revocation information used to validate a signature at a particular time. This method could be called separately or in SignatureValidated event handler after successful signature validation.

Config Method (XAdESVerifier Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (XAdESVerifier Component)

Performs an additional action.

Syntax

function DoAction(ActionID: String; ActionParams: String): String;

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Verify Method (XAdESVerifier Component)

Verifies a signed XML document.

Syntax

procedure Verify();

Remarks

Call this method to verify the signature embedded in the document. Pass the document via InputStream or InputFile property. Use VerifyDetached to verify the external data in case of a detached signature.

VerifyDetached Method (XAdESVerifier Component)

Verifies a detached signature over external XML data.

Syntax

procedure VerifyDetached();

Remarks

Call this method to verify a signature over external (detached) data provided via DataStream or DataFile.

ChainElementDownload Event (XAdESVerifier Component)

TBD.

Syntax

type TChainElementDownloadEvent = procedure (
  Sender: TObject;
  const Cert: String;
  const CACert: String;
  const Location: String
) of Object;

property OnChainElementDownload: TChainElementDownloadEvent read FOnChainElementDownload write FOnChainElementDownload;

Remarks

TBD.

ChainElementNeeded Event (XAdESVerifier Component)

TBD.

Syntax

type TChainElementNeededEvent = procedure (
  Sender: TObject;
  const Cert: String;
  const CACert: String
) of Object;

property OnChainElementNeeded: TChainElementNeededEvent read FOnChainElementNeeded write FOnChainElementNeeded;

Remarks

TBD.

ChainValidated Event (XAdESVerifier Component)

Reports the end of the validation process.

Syntax

type TChainValidatedEvent = procedure (
  Sender: TObject;
  const SubjectRDN: String;
  ValidationResult: Integer;
  ValidationDetails: Integer
) of Object;

property OnChainValidated: TChainValidatedEvent read FOnChainValidated write FOnChainValidated;

Remarks

This event is fired when a certificate chain has been validated. SubjectRDN identifies the owner of the validated certificate.

If ValidationResult equals to 0 (zero), validation has succeeded. Any other value reports failure, and ValidationDetails specifies more details on possible reason for it.

Error Event (XAdESVerifier Component)

Information about errors during signature verification.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

The event is fired in case of exceptional conditions during verification.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to XML.

Notification Event (XAdESVerifier Component)

This event notifies the application about an underlying control flow event.

Syntax

type TNotificationEvent = procedure (
  Sender: TObject;
  const EventID: String;
  const EventParam: String
) of Object;

property OnNotification: TNotificationEvent read FOnNotification write FOnNotification;

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

ReferenceValidated Event (XAdESVerifier Component)

Marks the end of a reference validation.

Syntax

type TReferenceValidatedEvent = procedure (
  Sender: TObject;
  const ID: String;
  const URI: String;
  const RefType: String;
  ReferenceIndex: Integer;
  DigestValid: Boolean
) of Object;

property OnReferenceValidated: TReferenceValidatedEvent read FOnReferenceValidated write FOnReferenceValidated;

Remarks

The component fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.

ResolveReference Event (XAdESVerifier Component)

Asks the application to resolve a reference.

Syntax

type TResolveReferenceEvent = procedure (
  Sender: TObject;
  const URI: String;
  ReferenceIndex: Integer
) of Object;

property OnResolveReference: TResolveReferenceEvent read FOnResolveReference write FOnResolveReference;

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

RetrieveCertificate Event (XAdESVerifier Component)

This event is fired when a certificate should be retrieved.

Syntax

type TRetrieveCertificateEvent = procedure (
  Sender: TObject;
  const URI: String
) of Object;

property OnRetrieveCertificate: TRetrieveCertificateEvent read FOnRetrieveCertificate write FOnRetrieveCertificate;

Remarks

This event could occur if you are verifying XAdES-C form or higher. URI parameter contains a URI value of the stored certificate along with a signature. The user should add the certificate to the KnownCertificates property.

RetrieveCRL Event (XAdESVerifier Component)

This event is fired when a CRL should be retrieved.

Syntax

type TRetrieveCRLEvent = procedure (
  Sender: TObject;
  const URI: String
) of Object;

property OnRetrieveCRL: TRetrieveCRLEvent read FOnRetrieveCRL write FOnRetrieveCRL;

Remarks

This event could occur if you are verifying XAdES-C form or higher. URI parameter contains a URI value of the stored CRL along with a signature. The user should add the CRL to the KnownCRLs property.

RetrieveOCSPResponse Event (XAdESVerifier Component)

This event is fired when a OCSP Response should be retrieved.

Syntax

type TRetrieveOCSPResponseEvent = procedure (
  Sender: TObject;
  const URI: String
) of Object;

property OnRetrieveOCSPResponse: TRetrieveOCSPResponseEvent read FOnRetrieveOCSPResponse write FOnRetrieveOCSPResponse;

Remarks

This event could occur if you are verifying XAdES-C form or higher. URI parameter contains a URI value of the stored OCSP Response along with a signature. The user should add the OCSP Response to the KnownOCSPs property.

SignatureFound Event (XAdESVerifier Component)

Signifies the start of signature validation.

Syntax

type TSignatureFoundEvent = procedure (
  Sender: TObject;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  CertFound: Boolean;
  var ValidateSignature: Boolean;
  var ValidateChain: Boolean
) of Object;

property OnSignatureFound: TSignatureFoundEvent read FOnSignatureFound write FOnSignatureFound;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (XAdESVerifier Component)

Reports the signature validation result.

Syntax

type TSignatureValidatedEvent = procedure (
  Sender: TObject;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  ValidationResult: Integer
) of Object;

property OnSignatureValidated: TSignatureValidatedEvent read FOnSignatureValidated write FOnSignatureValidated;

Remarks

This event is fired when the complete XML signature validation process is finished. IssuerRDN returns the name of the signature issuer, SerialNumber identifies the signing certificate, SubjectKeyID contains the key identifier (SecureBlackbox uses SHA-1 hash algorithm output as key identifiers). Finally, ValidationResult specifies whether signature is valid or not:


xsvValid	`0`
xsvUnknown	`1`
xsvCorrupted	`2`
xsvSignerNotFound	`3`
xsvFailure	`4`
xsvReferenceCorrupted	`5`

StoreCertificate Event (XAdESVerifier Component)

This event is fired when a certificate should be stored along with a signature.

Syntax

type TStoreCertificateEvent = procedure (
  Sender: TObject;
  Cert: TBytes;
  var URI: String
) of Object;

property OnStoreCertificate: TStoreCertificateEvent read FOnStoreCertificate write FOnStoreCertificate;

Remarks

This event could occur if you are verifying XAdES-C form or higher. Cert parameter contains a certificate in binary form that should be stored along with a signature, and the user should provide the URI of the stored certificate.

StoreCRL Event (XAdESVerifier Component)

This event is fired when a CRL should be stored along with a signature.

Syntax

type TStoreCRLEvent = procedure (
  Sender: TObject;
  CRL: TBytes;
  var URI: String
) of Object;

property OnStoreCRL: TStoreCRLEvent read FOnStoreCRL write FOnStoreCRL;

Remarks

This event could occur if you are verifying XAdES-C form or higher. CRL parameter contains a CRL in binary form that should be stored along with a signature, and the user should provide the URI of the stored CRL.

StoreOCSPResponse Event (XAdESVerifier Component)

This event is fired when a OCSP Response should be stored along with a signature.

Syntax

type TStoreOCSPResponseEvent = procedure (
  Sender: TObject;
  OCSPResponse: TBytes;
  var URI: String
) of Object;

property OnStoreOCSPResponse: TStoreOCSPResponseEvent read FOnStoreOCSPResponse write FOnStoreOCSPResponse;

Remarks

This event could occur if you are verifying XAdES-C form or higher. OCSPResponse parameter contains an OCSP Response in binary form that should be stored along with a signature, and the user should provide the URI of the stored OCSP Response.

TimestampFound Event (XAdESVerifier Component)

Signifies the start of a timestamp validation routine.

Syntax

type TTimestampFoundEvent = procedure (
  Sender: TObject;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  CertFound: Boolean;
  var ValidateTimestamp: Boolean;
  var ValidateChain: Boolean
) of Object;

property OnTimestampFound: TTimestampFoundEvent read FOnTimestampFound write FOnTimestampFound;

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (XAdESVerifier Component)

Reports the completion of the timestamp validation routine.

Syntax

type TTimestampValidatedEvent = procedure (
  Sender: TObject;
  const IssuerRDN: String;
  SerialNumber: TBytes;
  SubjectKeyID: TBytes;
  const Time: String;
  ValidationResult: Integer;
  ChainValidationResult: Integer;
  ChainValidationDetails: Integer
) of Object;

property OnTimestampValidated: TTimestampValidatedEvent read FOnTimestampValidated write FOnTimestampValidated;

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

TLSCertValidate Event (XAdESVerifier Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

type TTLSCertValidateEvent = procedure (
  Sender: TObject;
  const ServerHostname: String;
  const ServerIP: String;
  var Accept: Boolean
) of Object;

property OnTLSCertValidate: TTLSCertValidateEvent read FOnTLSCertValidate write FOnTLSCertValidate;

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

ValidationProgress Event (XAdESVerifier Component)

TBD.

Syntax

type TValidationProgressEvent = procedure (
  Sender: TObject;
  const ValidationEventType: String;
  const Cert: String;
  const CACert: String;
  var DoContinue: Boolean
) of Object;

property OnValidationProgress: TValidationProgressEvent read FOnValidationProgress write FOnValidationProgress;

Remarks

TBD.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

Bytes
TBytes

Returns raw certificate data in DER format.

CA
Boolean

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

CAKeyID
TBytes

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

CRLDistributionPoints
String

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Curve
String

Specifies the elliptic curve of the EC public key.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

Fingerprint
TBytes

Contains the fingerprint (a hash imprint) of this certificate.

FriendlyName
String

Contains an associated alias (friendly name) of the certificate.

Handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

HashAlgorithm
String

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Issuer
String

The common name of the certificate issuer (CA), typically a company name.

IssuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

KeyAlgorithm
String

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

KeyBits
Integer

Returns the length of the public key.

KeyFingerprint
TBytes

Returns a fingerprint of the public key contained in the certificate.

KeyUsage
Integer

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

KeyValid
Boolean

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
String

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

OCSPNoCheck
Boolean

TBD.

Origin
Integer

Returns the origin of this certificate.

PolicyIDs
String

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

PrivateKeyBytes
TBytes

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

PrivateKeyExists
Boolean

Indicates whether the certificate has an associated private key.

PrivateKeyExtractable
Boolean

Indicates whether the private key is extractable

PublicKeyBytes
TBytes

Contains the certificate's public key in DER format.

QualifiedStatements
TsbxQualifiedStatementsTypes

TBD

SelfSigned
Boolean

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
TBytes

Returns the certificate's serial number.

SigAlgorithm
String

Indicates the algorithm that was used by the CA to sign this certificate.

Subject
String

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

SubjectAlternativeName
String

TBD.

SubjectKeyID
TBytes

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

SubjectRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

ValidFrom
String

The time point at which the certificate becomes valid, in UTC.

ValidTo
String

The time point at which the certificate expires, in UTC.

Constructors

constructor Create();

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields


Bytes TBytes	Returns raw CRL data in DER format.
CAKeyID TBytes	A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
EntryCount Integer	Returns the number of certificate status entries in the CRL.
Handle Int64	Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. `pdfSigner.setSigningCertHandle(certMgr.getCertHandle());`
Issuer String	The common name of the CRL issuer (CA), typically a company name.
IssuerRDN String	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
Location String	The URL that the CRL was downloaded from.
NextUpdate String	The planned time and date of the next version of this CRL to be published.
SigAlgorithm String	The public key algorithm that was used by the CA to sign this CRL.
TBS TBytes	The to-be-signed part of the CRL (the CRL without the signature part).
ThisUpdate String	The date and time at which this version of the CRL was published.

Constructors

constructor Create();

Creates an empty CRL object.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRL).

An OCSP response is a snapshot of the certificate status at a given time.

Fields


Bytes TBytes	Buffer containing raw OCSP response data.
EntryCount Integer	The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
Handle Int64	Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. `pdfSigner.setSigningCertHandle(certMgr.getCertHandle());`
Issuer String	Indicates the issuer of this response (a CA or its authorized representative).
IssuerRDN String	Indicates the RDN of the issuer of this response (a CA or its authorized representative).
Location String	Location of the OCSP responder.
ProducedAt String	Specifies the time when the response was produced, in UTC.

Constructors

constructor Create();

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Address
String

The IP address of the proxy server.

Authentication
TsbxProxyAuthTypes

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

Password
String

The password to authenticate to the proxy server.

Port
Integer

The port on the proxy server to connect to.

ProxyType
TsbxProxyTypes

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

RequestHeaders
String

Contains HTTP request headers for WebTunnel and HTTP proxy.

ResponseBody
String

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

ResponseHeaders
String

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

UseIPv6
Boolean

Specifies whether IPv6 should be used when connecting through the proxy.

UseProxy
Boolean

Enables or disables proxy-driven connection.

Username
String

Specifies the username credential for proxy authentication.

Constructors

constructor Create();

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

DNSMode
TsbxDNSResolveModes

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

DNSPort
Integer

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
Integer

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

DNSServers
String

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
Integer

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

IncomingSpeedLimit
Integer

The maximum number of bytes to read from the socket, per second.

LocalAddress
String

The local network interface to bind the socket to.

LocalPort
Integer

The local port number to bind the socket to.

OutgoingSpeedLimit
Integer

The maximum number of bytes to write to the socket, per second.

Timeout
Integer

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
Boolean

Enables or disables IP protocol version 6.

Constructors

constructor Create();

Creates a new SocketSettings object.

TimestampInfo Type

A container for timestamp information.

Remarks

The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.

Fields

Accuracy
Int64

This field indicates the accuracy of the included time mark, in microseconds.

Bytes
TBytes

Returns raw timestamp data in DER format.

ChainValidationDetails
Integer

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationResult
TsbxChainValidities

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

HashAlgorithm
String

Returns the timestamp's hash algorithm


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

SerialNumber
TBytes

Returns the timestamp's serial number.

Time
String

The time point incorporated into the timestamp.

TimestampType
TsbxTimestampTypes

Returns the timestamp type.

Available options:


tstUnknown	`0`
tstLegacy	`1`	Supported by: AuthenticodeVerifier
tstTrusted	`2`	Supported by: AuthenticodeVerifier
tstGeneric	`3`	Supported by: CAdESVerifier
tstESC	`4`	Supported by: CAdESVerifier
tstContent	`5`	Supported by: CAdESVerifier
tstCertsAndCRLs	`6`	Supported by: CAdESVerifier
tstArchive	`7`	Archive timestamp. Supported by: CAdESVerifier, OfficeVerifier, SOAPVerifier, XAdESVerifier
tstArchive2	`8`	Archive v2 timestamp. Supported by: CAdESVerifier
tstArchive3	`9`	Archive v3 timestamp. Supported by: CAdESVerifier
tstIndividualDataObjects	`10`	Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstAllDataObjects	`11`	Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstSignature	`12`	Signature timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstRefsOnly	`13`	RefsOnly timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier
tstSigAndRefs	`14`	SigAndRefs timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

TSAName
String

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

ValidationLog
String

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

ValidationResult
TsbxSignatureValidities

Contains timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

Constructors

constructor Create();

Creates a new TimestampInfo object with default field values.

TLSSettings Type

A container for TLS connection settings.

Remarks

TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

AutoValidateCertificates
Boolean

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

BaseConfiguration
TsbxSecureTransportPredefinedConfigurations

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Ciphersuites
String

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

ECCurves
String

Defines the elliptic curves to enable.

Extensions
String

Provides access to TLS extensions.

ForceResumeIfDestinationChanges
Boolean

Whether to force TLS session resumption when the destination address changes.

PreSharedIdentity
String

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedKey
String

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

PreSharedKeyCiphersuite
String

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

RenegotiationAttackPreventionMode
TsbxRenegotiationAttackPreventionModes

Selects renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

RevocationCheck
TsbxRevocationCheckKinds

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone (`0`)	No revocation checking
crcAuto (`1`)	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (`2`)	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (`3`)	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (`4`)	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (`5`)	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (`6`)	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (`7`)	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (`8`)	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

SSLOptions
Integer

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send handshake message as large batches rather than individually

TLSMode
TsbxSSLModes

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.

UseExtendedMasterSecret
Boolean

Enables Extended Master Secret Extension, as defined in RFC 7627.

UseSessionResumption
Boolean

Enables or disables TLS session resumption capability.

Versions
Integer

Th SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

constructor Create();

Creates a new TLSSettings object.

XMLNamespace Type

Represents an XML namespace map for XPath expressions.

Remarks

This class defines the correspondence between Prefixes and namespace URIs.

Fields


Prefix String	A user-defined prefix value of a namespace.
URI String	A user-defined URI value of a namespace.

Constructors

constructor Create();

Creates a new XML namespace object.

XMLReference Type

Represents an XML reference element.

Remarks

XMLReference specifies the digest algorithm and digest value, and, optionally: an identifier of the object being signed, the type of the object, and/or a list of transforms to be applied prior to digesting.

Fields

AutoGenerateElementId
Boolean

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

CanonicalizationMethod
TsbxXMLCanonicalizationMethods

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

CustomElementId
String

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

DigestValue
TBytes

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

Handle
Int64

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

HashAlgorithm
String

Specifies the hash algorithm to be used.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

HasURI
Boolean

Specifies whether the URI is set (even when it is empty).

ID
String

A user-defined identifier (ID) attribute of this Reference element.

InclusiveNamespacesPrefixList
String

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

ReferenceType
String

The Reference's type attribute as defined in XMLDSIG specification.

TargetData
TBytes

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

TargetXMLElement
String

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:


""	an empty string indicates the Document element.
"#id"	indicates an XML element with specified Id.
XPointer expression	indicates an XML element selected using XPointer expression. Use the XPathNamespaces property to specify Prefixes and NamespaceURIs For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined in XPathNamespaces property
Node name	indicates an XML element selected using its NodeName. For example: "data" - indicates an XML element with node name "data".

URI
String

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

UseBase64Transform
Boolean

Specifies whether Base64 transform is included in transform chain.

UseEnvelopedSignatureTransform
Boolean

Specifies whether enveloped signature transform is included in transform chain.

UseXPathFilter2Transform
Boolean

Specifies whether XPath Filter 2.0 transform is included in transform chain.

UseXPathTransform
Boolean

Specifies whether XPath transform is included in transform chain.

XPathExpression
String

Use this property to specify XPath expression for XPath transform of the reference.

XPathFilter2Expressions
String

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

TBD

XPathFilter2Filters
String

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:


"intersect"	Intersect filter computes the intersection of the selected subtrees with the filter node-set.
"subtract"	Subtract filter computes the subtraction of the selected subtrees with the filter node-set.
"union"	Union filter computes the union of the selected subtrees with the filter node-set.

XPathFilter2PrefixList
String

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

XPathPrefixList
String

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

Constructors

constructor Create();

Creates a new XML reference element.

constructor Create(valID: String);

Creates a new XML reference element from its ID .

constructor Create(valID: String; valURI: String);

Creates a new XML reference element from its ID and URI reference to the external data.

Configuration Settings (XAdESVerifier Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

XAdESVerifier Configuration Settings

ClaimedRoleText: The text of the claimed role.

Use this property to get the text of the first claimed role.

TBD

ClaimedRoleXML: The XML content of the claimed roles.

Use this property to get the XML content of the claimed roles element.

TBD

CommitmentTypeIndicationAllSignedDataObjects[Index]: Specifies the CommitmentTypeIndication's AllSignedDataObjects.

This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationCount: The number of the CommitmentTypeIndication elements.

Returns the number of the xades:CommitmentTypeIndication elements available.

CommitmentTypeIndicationIdentifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.

This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDescription[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.

This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDocumentationReferences[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierQualifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationObjectReference[Index]: Specifies the CommitmentTypeIndication's ObjectReference.

This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationQualifiersXML[Index]: The XML content of the CommitmentTypeIndication's Qualifiers.

This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element.

CustomTSLs: Specifies the custom TSLs.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

DataObjectFormatCount: The number of the DataObjectFormat elements.

Returns the number of the xades:DataObjectFormat elements available.

DataObjectFormatDescription[Index]: Specifies the DataObjectFormat's Description.

This property contains textual information related to the signed data object in the DataObjectFormat's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatEncoding[Index]: Specifies the DataObjectFormat's Encoding.

This property contains an indication of the encoding format of the signed data object in the DataObjectFormat's Encoding element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatMimeType[Index]: Specifies the DataObjectFormat's MimeType.

This property contains an indication of the MIME type of the signed data object in the DataObjectFormat's MimeType element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Identifier.

This property contains an identifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Identifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDescription[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Description.

This property contains an identifier's description indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDocumentationReferences[Index]: Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's DocumentationReferences element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierQualifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's IdentifierQualifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectReference[Index]: Specifies the DataObjectFormat's ObjectReference.

This property contains the DataObjectFormat's ObjectReference element that reference the ds:Reference element of the ds:Signature corresponding with the data object qualified by this property.

For example, if the corresponding ds:Reference element has an Id "reference-id-1", then you should set this property to "#reference-id-1" value.

Index value could be omitted for the first DataObjectFormat element.

DataType: Specifies the external data type.

Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for component.

The following data types are supported:


"" or "XML"		an XML document (by default).
"data"		a binary data.

DetachedResourceURI: Specifies a detached resource URI.

Specifies a URI of the provided data, usually the data filename if stored along with a detached signature.

ForceCompleteChainValidation: Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod: Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

HMACKey: The key value for HMAC.

TBD

The component uses base16 (hex) encoding for this configuration value.

HMACSigningUsed: Whether HMAC signing was used.

TBD

IDAttributeName: Specifies the custom name of ID attribute.

This property contains the custom name of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element.

IDAttributeNamespaceURI: Specifies the custom namespace URI of ID attribute.

This property contains the custom namespace URI of identifier (ID) attribute. Used to identify the target XML element when reference URI has "#id_name" value or when ID attribute should be auto-generated for a target XML element.

IgnoreOCSPNoCheckExtension: Whether OCSP NoCheck extension should be ignored.

Set this property to false to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows to emulate the verifying environment without actually changing its security settings.

IncludeKnownRevocationInfoToSignature: Whether to include custom revocation info to the signature.

This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain.

InclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList.

Use this property to read InclusiveNamespaces PrefixList used for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

KeyName: Identifies the key.

Contains a string value (with significant spaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, KeyName contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.

ManifestCount: The number of the manifest elements.

Returns the number of the ds:Manifest elements available.

ManifestID[Index]: The ID of the manifest element.

This property contains the identifier (ID) attribute of the ds:Manifest element. Index value could be omitted for the first manifest.

ManifestObjectIndex[Index]: The object element index to which the manifest element belongs.

This property contains the ds:Object element index to which the ds:Manifest element belongs. Index value could be omitted for the first signature properties.

ManifestXML[Index]: The XML content of the manifest element.

This property contains the XML content of the ds:Manifest element. Index value could be omitted for the first manifest.

ObjectCount: The number of the object elements.

Returns the number of the additional ds:Object elements available.

ObjectEncoding[Index]: The Encoding of the object element.

This property contains the Encoding attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectID[Index]: The ID of the object element.

This property contains the identifier (ID) attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectMimeType[Index]: The MIME type of the object element.

This property contains the MIME type attribute of the ds:Object element. Index value could be omitted for the first object.

ObjectXML[Index]: The XML content of the object element.

This property contains the XML content of the ds:Object element. Index value could be omitted for the first object.

ProductionPlace: Identifies the place of the signature production.

Use this property to get the signature production place.

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the component to publish 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

PSSUsed: Whether RSASSA-PSS mode was used.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations.

QualifiedStatus: Indicates a qualified electronic signature.

Use this property to check if an electronic signature is created using a qualified device for creating electronic signatures and that relies on a qualified electronic signature certificate. This property return TSP service status URI.

RemoveSignature: Whether to remove signature.

Enable to remove signature after its verification.

SignatureCompliance: SIgnature compliance with XMLDSig/EBICS.

Specifies whether the signature is compliant with W3C's XMLDSig, or with EBICS (Electronic Banking Internet Communication Standard).

Supported values are:


""		The same as "XML-DSig".
XML-DSig		The W3C's XMLDSig-compliant signature (by default).
EBICS		Electronic Banking Internet Communication Standard (EBICS) compliant signature. On signing the version is autodetected based on the document element.
EBICS_H3		Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H3.
EBICS_H4		Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H4.
EBICS_H5		Electronic Banking Internet Communication Standard (EBICS) compliant signature. The version is H5.

SignatureID: Contains the ID for Signature element.

This property contains the identifier (ID) attribute of the ds:Signature element.

SignaturePropertiesCount: The number of the signature properties elements.

Returns the number of the ds:SignatureProperties elements available.

SignaturePropertiesID[Index]: The ID of the signature properties element.

This property contains the identifier (ID) attribute of the ds:SignatureProperties element. Index value could be omitted for the first signature properties.

SignaturePropertiesObjectIndex[Index]: The object element index to which the signature properties element belongs.

This property contains the ds:Object element index to which the ds:SignatureProperties element belongs. Index value could be omitted for the first signature properties.

SignaturePropertiesXML[Index]: The XML content of the signature properties element.

This property contains the XML content of the ds:SignatureProperties element. Index value could be omitted for the first signature properties.

SignaturePropertyCount: The number of the signature property elements.

Returns the number of the ds:SignatureProperty elements available.

SignaturePropertyID[Index]: The ID of the signature properties element.

This property contains the identifier (ID) attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

SignaturePropertyPropertiesIndex[Index]: The signature properties element index to which the signature property element belongs.

This property contains the ds:SignatureProperties element index to which the ds:SignatureProperty element belongs. Index value could be omitted for the first signature property.

SignaturePropertyTarget[Index]: The Target of the signature properties element.

This property contains the Target attribute of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

SignaturePropertyXML[Index]: The XML content of the signature property element.

This property contains the XML content of the ds:SignatureProperty element. Index value could be omitted for the first signature property.

SigPolicyDescription: signature policy description.

Use this property to get the Description of the signature policy.

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to get the explicit text of the user notice to be displayed when the signature is verified.

SigPolicyHash: The hash value of the signature policy.

Use this property to get the hash value of the signature policy.

SigPolicyHashAlgorithm: The hash algorithm used to compute the signature policy hash.

Use this property to get the algorithm used to compute the signature policy hash.

SigPolicyID: Identifies the signature policy.

Use this property to get an identifier that uniquely identifies a specific version of the signature policy.

SigPolicyNoticeNumbers: Contains user notice numbers.

This property provides an access to the list of notice numbers, by which the explicit signature policy notice texts could be retrieved.

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for XAdES-EPES form.

SigPolicyURI: Signature policy URI.

Use this property to get the URI of the signature policy.

TempPath: Location where the temporary files are stored.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TimestampCanonicalizationMethod: Specifies canonicalization method used in timestamp.

Use this property to specify the canonicalization method used in timestamp.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

TimestampValidationDataDetails: Specifies timestamp validation data details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via TLSClientChain property. Note that the component may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

TBD

TSLDistributionPoints: Contains XML content of distribution points of the TSL used.

Use this property to get XML content of distribution points of the TSL used to obtain the qualified status of the certificate.

TSLDistributionPoints[Idx]: Contains distribution point of the specified index of the TSL used.

Use this property to get distribution point of the specified index of the TSL used to obtain the qualified status of the certificate.

TSLHistoricalInformationPeriod: Contains historical information period of the TSL used.

Use this property to get historical information period of the TSL used to obtain the qualified status of the certificate.

TSLLegalNotices: Contains XML content of legal notices of the TSL used.

Use this property to get XML content of multilingual legal notices of the TSL used to obtain the qualified status of the certificate.

TSLLegalNotices[lang]: Contains legal notices for the specified language of the TSL used.

Use this property to get legal notices for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLListIssueDateTime: Contains list issue date and time of the TSL used.

Use this property to get list issue date and time of the TSL used to obtain the qualified status of the certificate.

TSLNextUpdate: Contains next update date and time of the TSL used.

Use this property to get next update date and time of the TSL used to obtain the qualified status of the certificate.

TSLPolicies: Contains XML content of policies of the TSL used.

Use this property to get XML content of multilingual policies of the TSL used to obtain the qualified status of the certificate.

TSLPolicies[lang]: Contains policies for the specified language of the TSL used.

Use this property to get policies for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeExtensions: Contains XML content of scheme extensions of the TSL used.

Use this property to get XML content of scheme extensions of the TSL used to obtain the qualified status of the certificate.

TSLSchemeExtensions[Idx]: Contains XML content of scheme extension of the specified index of the TSL used.

Use this property to get XML content of scheme extension of the specified index of the TSL used to obtain the qualified status of the certificate.

TSLSchemeInformationURI: Contains XML content of scheme information URI of the TSL used.

Use this property to get XML content of multilingual scheme information URI of the TSL used to obtain the qualified status of the certificate.

TSLSchemeInformationURI[lang]: Contains scheme information URI for the specified language of the TSL used.

Use this property to get scheme information URI for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeName: Contains XML content of scheme name of the TSL used.

Use this property to get XML content of multilingual scheme name of the TSL used to obtain the qualified status of the certificate.

TSLSchemeName[lang]: Contains scheme name for the specified language of the TSL used.

Use this property to get scheme name for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorAddress: Contains XML content of scheme operator address of the TSL used.

Use this property to get XML content of scheme operator address of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorName: Contains XML content of scheme operator name of the TSL used.

Use this property to get XML content of multilingual scheme operator name of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorName[lang]: Contains scheme operator name for the specified language of the TSL used.

Use this property to get scheme operator name for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTerritory: Contains scheme territory of the TSL used.

Use this property to get scheme territory of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTypeCommunityRules: Contains XML content of scheme type/community/rules of the TSL used.

Use this property to get XML content of multilingual scheme type/community/rules of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTypeCommunityRules[lang]: Contains scheme type/community/rules for the specified language of the TSL used.

Use this property to get scheme type/community/rules for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSequenceNumber: Contains sequence number of the TSL used.

Use this property to get sequence number of the TSL used to obtain the qualified status of the certificate.

TSLsRetrieveLog: Contains the complete log of the TSLs retrieve.

Use this property to access the TSLs retrieve log produced by the component. The log can be very useful when investigating issues with TSL retrieve.

TSLStatusDeterminationApproach: Contains status determination approach of the TSL used.

Use this property to get status determination approach of the TSL used to obtain the qualified status of the certificate.

TSLsValidationLog: Contains the complete log of the TSLs validation.

Use this property to access the TSLs validation log produced by the component. The log can be very useful when investigating issues with TSL validation.

TSLTSPAdditionalServiceInformation: Contains addtional service information of the TSP service used.

Use this property to get the list of addtional service information of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPAddress: Contains XML content of the address of the TSP used.

Use this property to get XML content of the address of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPHistoryInstance: Indicates that TSP service history instance used.

Indicates whether or not the qualified status was obtained from the TSP (Trust Service Provider) service history instance.

TSLTSPHistoryInstanceAdditionalServiceInformation: Contains addtional service information of the TSP service history instance used.

Use this property to get the list of addtional service information of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPHistoryInstanceQualifiers: Contains list of qualifiers of the TSP service history instance used.

Use this property to get the list of qualifiers of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPHistoryInstanceServiceInformationExtensions: Contains XML content of information extensions of the TSP service history instance used.

Use this property to get XML content of information extensions of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceInformationExtensions[Idx]: Contains XML content of information extension of the specified index of the TSP service history instance used.

Use this property to get XML content of information extension of the specified index of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceName: Contains XML content of name of the TSP service history instance used.

Use this property to get XML content of multilingual name of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceName[lang]: Contains name for the specified language of the TSP service history instance used.

Use this property to get the name for the specified language code (e.g. 'en') of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceStatus: Contains status of the TSP service history instance used.

Use this property to get the status of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceStatusStartingTime: Contains status starting time of the TSP service history instance used.

Use this property to get the status starting time of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceTypeIdentifier: Contains type identifier of the TSP service history instance used.

Use this property to get type identifier of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceXML: Contains XML content of the TSP service history instance used.

Use this property to get XML content of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPInformationExtensions: Contains XML content of information extensions of the TSP used.

Use this property to get XML content of information extensions of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationExtensions[Idx]: Contains XML content of information extension of the specified index of the TSP used.

Use this property to get XML content of information extension of the specified index of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationURI: Contains XML content of information URI of the TSP used.

Use this property to get XML content of multilingual information URI of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationURI[lang]: Contains information URI for the specified language of the TSP used.

Use this property to get the information URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPName: Contains XML content of name of the TSP used.

Use this property to get XML content of multilingual name of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPName[lang]: Contains name for the specified language of the TSP used.

Use this property to get the name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPSchemeServiceDefinitionURI: Contains XML content of scheme service definition URI of the TSP service used.

Use this property to get XML content of multilingual scheme service definition URI of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPSchemeServiceDefinitionURI[lang]: Contains scheme service definition URI for the specified language of the TSP service used.

Use this property to get the scheme service definition URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceDefinitionURI: Contains XML content of definition URI of the TSP service used.

Use this property to get XML content of multilingual definition URI of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceDefinitionURI[lang]: Contains definition URI for the specified language of the TSP service used.

Use this property to get the definition URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceInformationExtensions: Contains XML content of information extensions of the TSP service used.

Use this property to get XML content of information extensions of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceInformationExtensions[Idx]: Contains XML content of information extension of the specified index of the TSP service used.

Use this property to get XML content of information extension of the specified index of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceName: Contains XML content of name of the TSP service used.

Use this property to get XML content of multilingual name of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceName[lang]: Contains name for the specified language of the TSP service used.

Use this property to get the name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceQualifiers: Contains list of qualifiers of the TSP service used.

Use this property to get the list of qualifiers of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPServiceStatus: Contains status of the TSP service used.

Use this property to get the status of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceStatusStartingTime: Contains status starting time of the TSP service used.

Use this property to get the status starting time of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceSupplyPoints: Contains XML content of the supply points of the TSP service used.

Use this property to get XML content of the supply points of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceTypeIdentifier: Contains type identifier of the TSP service used.

Use this property to get type identifier of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceXML: Contains XML content of the TSP service used.

Use this property to get XML content of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPTradeName: Contains XML content of trade name of the TSP used.

Use this property to get XML content of multilingual trade name of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPTradeName[lang]: Contains trade name for the specified language of the TSP used.

Use this property to get the trade name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPXML: Contains XML content of the TSP used.

Use this property to get XML content of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLType: Contains TSL type of the TSL used.

Use this property to get TSL type of the TSL used to obtain the qualified status of the certificate.

TSLVersionIdentifier: Contains version identifier of the TSL used.

Use this property to get version identifier of the TSL used to obtain the qualified status of the certificate.

TSLXML: Contains XML content of the TSL used.

Use this property to get XML content of the TSL used to obtain the qualified status of the certificate.

TspHashAlgorithm: Sets a specific hash algorithm for use with the timestamping service.

In default configuration component uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp.

UseDefaultTSLs: Enables or disables the use of the default TSLs.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists). The result of this check reported in Qualified property.

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseMicrosoftCTL: Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

ValidationDataRefsDetails: Specifies validation data references details to include to the signature.

Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form.

Supported values are:


certificate		References to X.509 certificates
crl		References to certificate revocation lists (CRL)
ocsp		References to OCSP responses

ValidationDataValuesDetails: Specifies validation data values details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

WriteBOM: Specifies whether byte-order mark should be written when saving the document.

Set this property to False to disable writing byte-order mark (BOM) when saving the XML document in Unicode encoding.

Base Configuration Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the component.

Supported values are:


off		No caching (default)
local		Local caching (supported for HTTPClient, RESTClient and SOAPClient only)
global		Global caching

Cookies: Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (XAdESVerifier Component)

XAdESVerifier Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Component is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)
39845889   Input file does not exist (SB_ERROR_XML_INPUTFILE_NOT_EXISTS)
39845890   Data file does not exist (SB_ERROR_XML_DATAFILE_NOT_EXISTS)
39845891   Unsupported signature method type (SB_ERROR_XML_UNSUPPORTED_SIGNATURE_METHOD_TYPE)
39845892   Unsupported has algorithm (SB_ERROR_XML_UNSUPPORTED_HASH_ALGORITHM)
39845893   Unsupported key type (SB_ERROR_XML_UNSUPPORTED_KEY_TYPE)
39845894   Invalid key type (SB_ERROR_XML_INVALID_KEY_TYPE)
39845895   Invalid encryption method (SB_ERROR_XML_INVALID_ENCRYPTION_METHOD)
39845896   Not found (SB_ERROR_XML_NOT_FOUND)
39845897   No element ID (SB_ERROR_XML_NO_ELEMENT_ID)


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Component is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
	39845889 Input file does not exist (`SB_ERROR_XML_INPUTFILE_NOT_EXISTS`)
	39845890 Data file does not exist (`SB_ERROR_XML_DATAFILE_NOT_EXISTS`)
	39845891 Unsupported signature method type (`SB_ERROR_XML_UNSUPPORTED_SIGNATURE_METHOD_TYPE`)
	39845892 Unsupported has algorithm (`SB_ERROR_XML_UNSUPPORTED_HASH_ALGORITHM`)
	39845893 Unsupported key type (`SB_ERROR_XML_UNSUPPORTED_KEY_TYPE`)
	39845894 Invalid key type (`SB_ERROR_XML_INVALID_KEY_TYPE`)
	39845895 Invalid encryption method (`SB_ERROR_XML_INVALID_ENCRYPTION_METHOD`)
	39845896 Not found (`SB_ERROR_XML_NOT_FOUND`)
	39845897 No element ID (`SB_ERROR_XML_NO_ELEMENT_ID`)

SecureBlackbox 2022 Delphi Edition

XAdESVerifier Component

Syntax

Remarks

Property List

Method List

Event List

Configuration Settings

AllSignaturesValid Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

BlockedCertificates Property (XAdESVerifier Component)

Syntax

Remarks

CanonicalizationMethod Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

Certificates Property (XAdESVerifier Component)

Syntax

Remarks

ChainValidationDetails Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

ChainValidationResult Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

ClaimedSigningTime Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

CRLs Property (XAdESVerifier Component)

Syntax

Remarks

CurrentCACertificate Property (XAdESVerifier Component)

Syntax

Remarks

CurrentCertificate Property (XAdESVerifier Component)

Syntax

Remarks

DataFile Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

Encoding Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

FIPSMode Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

HashAlgorithm Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

IgnoreChainValidationErrors Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

InputBytes Property (XAdESVerifier Component)

Syntax

Remarks

InputFile Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

InterimValidationDetails Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

InterimValidationResult Property (XAdESVerifier Component)

Syntax

Default Value

Remarks

KnownCertificates Property (XAdESVerifier Component)

Syntax