SAMLSPServer Component
Properties Methods Events Config Settings Errors
The SAMLSPServer component represents a SAML service provider.
Syntax
TsbxSAMLSPServer
Remarks
The Service Provider in the SAML exchange flow represents the web server that receives and accepts authentication assertions issued by the Identity Provider for single sign-on (SSO). Most commonly, an SP server is part of the application responsible for communicating with an Identity Provider to establish the authenticity of application users.
SAMLSPServer provides easy means of integrating the SAML Service Provider functionality into your application. It presents a fully-features SP endpoint with its own HTTP(S) and assertion validation engines.
Please find below a step-by-step guide on setting up your own SAML SP endpoint.
- Register the IdP metadata using the LoadIDPMetadata method or its stream-based variant.
Most IDPs let you download their metadata in XML format. The metadata file contains general
parameters of the IdP endpoint, such as its web address and algorithm requirements.
server.LoadIDPMetadata("their_metadata.xml"); // contains "<?xml version="1.0"?><md:EntityDescriptor ID="ab12" ... </md:EntityDescriptor>";
- Configure the main server capabilities:
// public server endpoint (use "https://" and/or port 443 if required) server.URL = "http://sp.myapp.com"; server.Port = 80; // IdP triggers this URL to pull metadata server.MetadataURL = '/sp/metadata'; // ACS is th "main" SP endpoint that receives assertions from the IdP server.AssertionConsumerService = '/sp/AssertionConsumerService'; server.SPToIDPBinding = csbtRedirect; // the SP will use HTTP redirect to forward the browser to the IdP when required server.AssertionConsumerServiceBindings = 'POST'; // and we want the IdP to use POST to submit its assertions server.PreferredIDPToSPBinding = csbtPOST; // Single logout service setup server.SingleLogoutService = '/sp/SingleLogoutService'; server.SingleLogoutServiceBindings = 'Redirect,POST,Artifact'; server.LogoutPage = '/sp/logout'; server.RedirectOnLogoutPage = 'https://www.nsoftware.com'; // The document root of the server on the local system server.BaseDir = "D:\\Inetpub\\SAMLSP"; // Security parameters: indicating that we want to sign both // the metadata and the requests server.SignAuthnRequests = true; server.SignMetadata = true; // We need to attach certificates to be able to sign. // Assume we have loaded our signing certificate into // a CertificateManager object. server.SigningCertificate = mgr.Certificate; server.MetaSigningCertificate = mgr.Certificate;
- Personalize the server:
server.Config("OrganizationName=My Organization Ltd"); server.Config("OrganizationDisplayName=My Organization Pet Supplies"); server.Config("OrganizationURL=http://myorg.com"); server.Config("SigDigestMethod=http://www.w3.org/2001/04/xmlenc#sha256"); server.Config("SigMethod=http://www.w3.org/2001/04/xmldsig-more#rsa-sha256"); server.Config("WantAssertionsSigned=true");
- Optionally, save metadata to an XML file. This will let you send/upload it to the IdP,
so they could set your SP up. Some IdPs can download the metadata right from your SP
using the MetadataURL that you've provided above, in which case saving it to a file
is not necessary.
server.SaveMetadata("my_metadata.xml");
server.Start();
The server should now be running on the local system, listening to incoming connections on the port that you
have specified above (80). Use your browser to check if the server is responding by navigating
to the metadata URL (http://127.0.0.1:80/sp/metadata). If the server has been set up right,
you should see something like this:

Now let us actually try to use the SAML functionality. Copy an arbitrary file - for example, a recent photo of your cat - to the directory you provided earlier via the BaseDir property (D:\Inetpub\SAMLSP). Having copied the file (suppose it is called clifford.jpg), try to access it in your browser by navigating to http://127.0.0.1:80/clifford.jpg.
This is where SAML kicks in. Since you are not authenticated for the SP server yet (we have just launched it, so no one is), the server redirects your browser to the IdP endpoint for authentication. The address of the IdP is taken from the their_metadata.xml file that you have loaded at the very beginning.
Note: you can configure which resources to restrict access to using the ProtectedResources property. If ProtectedResources is empty, the server considers all the files in BaseDir and its subfolders to be protected.
It is now the IdP services turn to authenticate you. Most IdPs on this stage will present you with a login form. Yet, if you have signed in recently, the IdP may still remember you, in which case it will skip the form and proceed directly to the next step. After establishing and proving your identity, the IdP will generate an assertion, a signed proof that effectively states that the IdP knows who you are and have verified your identity rigorously. Think of the assertion as your unique pass to the resources protected by the SP. The IdP will then submit that assertion back to the SP at its AssertionConsumerService endpoint, again using your browser.
Note that the SP service knows nothing about how IdP authenticates you. All the SP is interested in is an assertion.
If the assertion is well-formed and its signature is valid, the SAML exchange completes. At this point the SP accepts the assertion and creates a session for you. You can now access the resources protected by the SP for as long as the session lasts. If this step succeeds, you should see the photo of your cat in your browser.
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
Active | Tells whether the server is active and ready to process requests. |
ArtifactResolutionService | The location of the artifact resolution service. |
AssertionConsumerService | The location of the Assertion Consumer Service. |
AssertionConsumerServiceBindings | Bindings supported by the Assertion Consumer Service. |
BaseDir | Base directory on the server. |
ClientAuth | Enables or disables certificate-based client authentication. |
EncryptionCertificate | The certificate to be used to decrypt assertions. |
ErrorOrigin | Indicates the endpoint where the error originates from. |
ErrorSeverity | The severity of the error that happened. |
ExternalCrypto | Provides access to external signing and DC parameters. |
FIPSMode | Reserved. |
Host | Specifies the host address of the SP server. |
Issuer | Name identifier of the issuer of the SP's requests. |
LogoutPage | Specifies the location of the logout page. |
MetadataURL | The SP's metadata location. |
MetaSigningCertificate | Specifies the metadata signing certificate. |
OfflineMode | Enables the Offline mode. |
Port | Specifies the listening port number. |
PreferredIDPToSPBinding | Specifies the preferred IdP to SP binding. |
ProtectedResources | Specifies the list of protected resources. |
RedirectOnLogoutPage | Specifies the location to redirect the user on logout. |
ServerCertificates | The server's TLS certificates. |
SigCanonicalizationMethod | The canonicalization method to use in the signature. |
SigDigestMethod | The digest method to use. |
SigMethod | The signature method to use. |
SignArtifactResolveRequests | Specifies whether to sign artifact resolution requests. |
SignAuthnRequests | Specifies whether to sign Authn requests. |
SigningCertificate | The certificate for signing the SP requests. |
SigningChain | The signing certificate chain. |
SignLogoutRequests | Specifies whether to sign Logout requests. |
SignMetadata | Specifies whether to sign the metadata. |
SingleLogoutService | The URL of the single logout service. |
SingleLogoutServiceBindings | Defines single logout service bindings. |
SocketSettings | Manages network connection settings. |
SPToIDPBinding | Specifies the IdP to SP binding to use. |
TLSSettings | Manages TLS layer settings. |
URL | Specifies the base URL of this SP server. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
Config | Sets or retrieves a configuration setting. |
DoAction | Performs an additional action. |
GetClientBuffer | Obtains a pending connection buffer. |
GetProviderProperty | Returns the value of a custom provider property. |
LoadIDPMetadata | Loads the metadata required for information exchange with the identity provider. |
LoadIDPMetadataFromStream | Loads the metadata required for information exchange with the identity provider. |
ProcessGenericRequest | Processes a generic HTTP SAML request. |
SaveMetadata | Saves the SP configuration to a metadata file. |
SaveMetadataToStream | Saves the SP configuration to a metadata file. |
SetClientBuffer | Commits a data buffer to the connection. |
SetProviderProperty | Sets the value of a custom provider property. |
Start | Starts the SP server. |
Stop | Stops the IdP server. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
Accept | Reports an incoming connection. |
AssertionCreated | Notifies the application about the creation of a new assertion. |
AssertionReceived | Notifies the user code about the receipt of an assertion. |
Connect | Reports an accepted connection. |
Disconnect | Fires to report a disconnected client. |
Error | Information about errors during data delivery. |
ExternalSign | Handles remote or external signing initiated by the server protocol. |
MetadataRequest | Notifies the application about the metadata request. |
Notification | This event notifies the application about an underlying control flow event. |
ResourceClose | Tells the application that it can close the opened resource. |
ResourceOpen | Requests the application to open the requested resource. |
ResourceRead | Requests the application to read from an opened resource. |
ResourceRequest | Notifies the application that a server resource is requested. |
SessionClosed | This event is fired when the SP server has closed a session. |
SessionEstablished | This event is fired when a new session has been established. |
SessionStageChanged | Notifies the application about the change of SAML session stage. |
Config Settings
The following is a list of config settings for the component with short descriptions. Click on the links for further details.
BoundPort | The port that was bound by the server. |
DualStack | Allows the use of ip4 and ip6 simultaneously. |
HandshakeTimeout | The HTTPS handshake timeout. |
MaxIssueInstantTimeDiff | The maximum issue-instant time delta. |
PortRangeFrom | The lower bound of allowed port scope to listen on. |
PortRangeTo | The higher bound of allowed port scope to listen on. |
SendBufferSize | The network send buffer size. |
ServerName | Specifies the server name for the created responses. |
SessionTimeout | The HTTP session timeout. |
SessionTTL | The SAML session time-to-live value. |
TempPath | Path for storing temporary files. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only). |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
StaticDNS | Specifies whether static DNS rules should be used. |
StaticIPAddress[domain] | Gets or sets an IP address for the specified domain name. |
StaticIPAddresses | Gets or sets all the static DNS rules. |
Tag | Allows to store any custom data. |
UseOwnDNSResolver | Specifies whether the client components should use own DNS resolver. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
Active Property (SAMLSPServer Component)
Tells whether the server is active and ready to process requests.
Syntax
property Active: Boolean read get_Active;
Default Value
false
Remarks
This property indicates whether the IdP server is in an active state.
This property is read-only and not available at design time.
ArtifactResolutionService Property (SAMLSPServer Component)
The location of the artifact resolution service.
Syntax
property ArtifactResolutionService: String read get_ArtifactResolutionService write set_ArtifactResolutionService;
Default Value
'/sp/ArtifactResolutionService'
Remarks
Use this property to specify the location of the artifact resolution service of this Service Provider (SP).
AssertionConsumerService Property (SAMLSPServer Component)
The location of the Assertion Consumer Service.
Syntax
property AssertionConsumerService: String read get_AssertionConsumerService write set_AssertionConsumerService;
Default Value
'/sp/AssertionConsumerService'
Remarks
The Assertion Consumer Service (ACS) is the location that accepts SAML responses (artifacts) to establish a session based on assertions.
AssertionConsumerServiceBindings Property (SAMLSPServer Component)
Bindings supported by the Assertion Consumer Service.
Syntax
property AssertionConsumerServiceBindings: String read get_AssertionConsumerServiceBindings write set_AssertionConsumerServiceBindings;
Default Value
'+Artifact,+POST,+Redirect'
Remarks
Use this property to specify the bindings for the Assertion Consumer Service (ACS) provided by this SP.
BaseDir Property (SAMLSPServer Component)
Base directory on the server.
Syntax
property BaseDir: String read get_BaseDir write set_BaseDir;
Default Value
''
Remarks
Use this property to specify the base directory for the SP server.
ClientAuth Property (SAMLSPServer Component)
Enables or disables certificate-based client authentication.
Syntax
property ClientAuth: TsbxClientAuthTypes read get_ClientAuth write set_ClientAuth;
TsbxClientAuthTypes = ( ccatNoAuth, ccatRequestCert, ccatRequireCert );
Default Value
ccatNoAuth
Remarks
Set this property to true to tune up the client authentication type: ccatNoAuth = 0; ccatRequestCert = 1; ccatRequireCert = 2;
EncryptionCertificate Property (SAMLSPServer Component)
The certificate to be used to decrypt assertions.
Syntax
property EncryptionCertificate: TsbxCertificate read get_EncryptionCertificate write set_EncryptionCertificate;
Remarks
Use this property to provide the certificate to be used for decrypting assertions included in IdP (Identity Provider) responses. This certificate should have a private key associated with it.
This property is not available at design time.
ErrorOrigin Property (SAMLSPServer Component)
Indicates the endpoint where the error originates from.
Syntax
property ErrorOrigin: TsbxErrorOrigins read get_ErrorOrigin write set_ErrorOrigin;
TsbxErrorOrigins = ( eoLocal, eoRemote );
Default Value
eoLocal
Remarks
Use this property to establish whether the reported error originates from a local or remote endpoint.
eoLocal | 0 | |
eoRemote | 1 |
This property is not available at design time.
ErrorSeverity Property (SAMLSPServer Component)
The severity of the error that happened.
Syntax
property ErrorSeverity: TsbxErrorSeverities read get_ErrorSeverity write set_ErrorSeverity;
TsbxErrorSeverities = ( esInfo, esWarning, esFatal );
Default Value
esWarning
Remarks
Use this property to establish whether the error is fatal.
esWarning | 1 | |
esFatal | 2 |
This property is not available at design time.
ExternalCrypto Property (SAMLSPServer Component)
Provides access to external signing and DC parameters.
Syntax
property ExternalCrypto: TsbxExternalCrypto read get_ExternalCrypto;
Remarks
Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on OnExternalSign event) and asynchronous (based on DC protocol and DCAuth signing component).
This property is read-only.
FIPSMode Property (SAMLSPServer Component)
Reserved.
Syntax
property FIPSMode: Boolean read get_FIPSMode write set_FIPSMode;
Default Value
false
Remarks
This property is reserved for future use.
Host Property (SAMLSPServer Component)
Specifies the host address of the SP server.
Syntax
property Host: String read get_Host write set_Host;
Default Value
''
Remarks
Use this property to specify the IP address on which to listen to incoming connections. To specify the listening port number, use Port.
Issuer Property (SAMLSPServer Component)
Name identifier of the issuer of the SP's requests.
Syntax
property Issuer: String read get_Issuer write set_Issuer;
Default Value
''
Remarks
Use this property to set the name identifier of this Service Provider (SP) to be used in its requests.
LogoutPage Property (SAMLSPServer Component)
Specifies the location of the logout page.
Syntax
property LogoutPage: String read get_LogoutPage write set_LogoutPage;
Default Value
'/sp/logout'
Remarks
Use this property to specify the relative URL of the logout page.
MetadataURL Property (SAMLSPServer Component)
The SP's metadata location.
Syntax
property MetadataURL: String read get_MetadataURL write set_MetadataURL;
Default Value
'/sp/metadata'
Remarks
This property specifies the metadata URL of this Service Provider (SP).
MetaSigningCertificate Property (SAMLSPServer Component)
Specifies the metadata signing certificate.
Syntax
property MetaSigningCertificate: TsbxCertificate read get_MetaSigningCertificate write set_MetaSigningCertificate;
Remarks
Use this property to specify the certificate to be used to sign the SP's metadata. This certificate should have a private key associated with it.
This property is not available at design time.
OfflineMode Property (SAMLSPServer Component)
Enables the Offline mode.
Syntax
property OfflineMode: Boolean read get_OfflineMode write set_OfflineMode;
Default Value
false
Remarks
In the Offline mode the server does not open the listening port. Instead, it expects all incoming requests to be provided via the ProcessGenericRequest calls.
The Offline mode is a handy mechanism for attaching the server to external web engines, such as IIS or Tomcat. It lets you leave the HTTP matters to the engine, and only be responsible for handling the actual SAML traffic.
Port Property (SAMLSPServer Component)
Specifies the listening port number.
Syntax
property Port: Integer read get_Port write set_Port;
Default Value
80
Remarks
Use this property to specify the port number on which the SP server should listen for incoming connections. To specify the server's IP address use Host.
PreferredIDPToSPBinding Property (SAMLSPServer Component)
Specifies the preferred IdP to SP binding.
Syntax
property PreferredIDPToSPBinding: TsbxSAMLBindingTypes read get_PreferredIDPToSPBinding write set_PreferredIDPToSPBinding;
TsbxSAMLBindingTypes = ( csbtNone, csbtSOAP, csbtPAOS, csbtRedirect, csbtPOST, csbtArtifact );
Default Value
csbtPOST
Remarks
Specifies the preferred binding (message exchange mechanism) used for communication with Identity Provider (IdP).
csbtNone | 0 | |
csbtSOAP | 1 | |
csbtPAOS | 2 | |
csbtRedirect | 3 | |
csbtPOST | 4 | |
csbtArtifact | 5 |
ProtectedResources Property (SAMLSPServer Component)
Specifies the list of protected resources.
Syntax
property ProtectedResources: String read get_ProtectedResources write set_ProtectedResources;
Default Value
''
Remarks
This property contains a set of relative URLs of the protected resources offered by this Service Provider (SP).
RedirectOnLogoutPage Property (SAMLSPServer Component)
Specifies the location to redirect the user on logout.
Syntax
property RedirectOnLogoutPage: String read get_RedirectOnLogoutPage write set_RedirectOnLogoutPage;
Default Value
'https://secureblackbox.com'
Remarks
Use this property to specify the page where to redirect the user on logout.
ServerCertificates Property (SAMLSPServer Component)
The server's TLS certificates.
Syntax
property ServerCertificates: TsbxCertificateList read get_ServerCertificates write set_ServerCertificates;
Remarks
Use this property to provide a list of TLS certificates for the server endpoint.
A TLS endpoint needs a certificate to be able to accept TLS connections. At least one of the certificates in the collection - the endpoint certificate - must have a private key associated with it.
The collection may include more than one endpoint certificate, and more than one chain. A typical usage scenario is to include two chains (ECDSA and RSA), to cater for clients with different ciphersuite preferences.
This property is not available at design time.
SigCanonicalizationMethod Property (SAMLSPServer Component)
The canonicalization method to use in the signature.
Syntax
property SigCanonicalizationMethod: String read get_SigCanonicalizationMethod write set_SigCanonicalizationMethod;
Default Value
''
Remarks
The URI of the canonicalization method to use in the signature (e.g. http://www.w3.org/TR/xml-exc-c14n/)
SigDigestMethod Property (SAMLSPServer Component)
The digest method to use.
Syntax
property SigDigestMethod: String read get_SigDigestMethod write set_SigDigestMethod;
Default Value
''
Remarks
The URI of the digest method to use for signing, as defined in XMLDSIG or XMLENC: http://www.w3.org/2000/09/xmldsig#sha256.
SigMethod Property (SAMLSPServer Component)
The signature method to use.
Syntax
property SigMethod: String read get_SigMethod write set_SigMethod;
Default Value
''
Remarks
The URI specifying the signature method to use for signing, for example http://www.w3.org/2001/04/xmldsig-more#rsa-sha256.
SignArtifactResolveRequests Property (SAMLSPServer Component)
Specifies whether to sign artifact resolution requests.
Syntax
property SignArtifactResolveRequests: Boolean read get_SignArtifactResolveRequests write set_SignArtifactResolveRequests;
Default Value
false
Remarks
Set this property to true to enable signing of artifact resolution requests.
SignAuthnRequests Property (SAMLSPServer Component)
Specifies whether to sign Authn requests.
Syntax
property SignAuthnRequests: Boolean read get_SignAuthnRequests write set_SignAuthnRequests;
Default Value
false
Remarks
Set this property to true to enable signing of Authn requests.
SigningCertificate Property (SAMLSPServer Component)
The certificate for signing the SP requests.
Syntax
property SigningCertificate: TsbxCertificate read get_SigningCertificate write set_SigningCertificate;
Remarks
Use this property to designate a certificate for signing the SP requests. The provided certificate must have a private key associated with it.
This property is not available at design time.
SigningChain Property (SAMLSPServer Component)
The signing certificate chain.
Syntax
property SigningChain: TsbxCertificateList read get_SigningChain write set_SigningChain;
Remarks
Use this property to provide the chain for the signing certificate. Use SigningCertificate property, if it is available, to provide the signing certificate itself.
This property is not available at design time.
SignLogoutRequests Property (SAMLSPServer Component)
Specifies whether to sign Logout requests.
Syntax
property SignLogoutRequests: Boolean read get_SignLogoutRequests write set_SignLogoutRequests;
Default Value
false
Remarks
Set this property to true to enable signing of logout requests.
SignMetadata Property (SAMLSPServer Component)
Specifies whether to sign the metadata.
Syntax
property SignMetadata: Boolean read get_SignMetadata write set_SignMetadata;
Default Value
false
Remarks
Set this property to True to enforce signing of the metadata before saving it. Do not forget to assign the signing certificate to the MetaSigningCertificate property.
SingleLogoutService Property (SAMLSPServer Component)
The URL of the single logout service.
Syntax
property SingleLogoutService: String read get_SingleLogoutService write set_SingleLogoutService;
Default Value
'/sp/SingleLogoutService'
Remarks
Use this property to specify the relative URL of the single logout service.
SingleLogoutServiceBindings Property (SAMLSPServer Component)
Defines single logout service bindings.
Syntax
property SingleLogoutServiceBindings: String read get_SingleLogoutServiceBindings write set_SingleLogoutServiceBindings;
Default Value
'+Artifact,+POST,+Redirect'
Remarks
Use this property to specify the single logout service bindings.
The binding is the mechanism of message exchange used by SAML requestors and responders.
SocketSettings Property (SAMLSPServer Component)
Manages network connection settings.
Syntax
property SocketSettings: TsbxSocketSettings read get_SocketSettings;
Remarks
Use this property to tune up network connection parameters.
This property is read-only.
SPToIDPBinding Property (SAMLSPServer Component)
Specifies the IdP to SP binding to use.
Syntax
property SPToIDPBinding: TsbxSAMLBindingTypes read get_SPToIDPBinding write set_SPToIDPBinding;
TsbxSAMLBindingTypes = ( csbtNone, csbtSOAP, csbtPAOS, csbtRedirect, csbtPOST, csbtArtifact );
Default Value
csbtRedirect
Remarks
Specifies the binding (message exchange mechanism) used for communication with Identity Provider (IdP) that is actually used during the session.
To specify the preferred binding, use PreferredIDPToSPBinding.
csbtNone | 0 | |
csbtSOAP | 1 | |
csbtPAOS | 2 | |
csbtRedirect | 3 | |
csbtPOST | 4 | |
csbtArtifact | 5 |
TLSSettings Property (SAMLSPServer Component)
Manages TLS layer settings.
Syntax
property TLSSettings: TsbxTLSSettings read get_TLSSettings;
Remarks
Use this property to tune up the TLS layer parameters.
This property is read-only.
URL Property (SAMLSPServer Component)
Specifies the base URL of this SP server.
Syntax
property URL: String read get_URL write set_URL;
Default Value
''
Remarks
Use this property to set the base URL for this Service Provider (SP) server.
Please make sure the URL you provide here aligns well with the relative endpoint resource paths, such as AssertionConsumerService or ArtifactResolutionService. The two parts (the URL and the endpoint paths) are concatenated to produce full endpoint URLs. Please double check that only one of the parts includes the slash character in it: either the endpoint paths at the beginning (the default configuration), or the base URL at the end.
Config Method (SAMLSPServer Component)
Sets or retrieves a configuration setting.
Syntax
function Config(ConfigurationString: String): String;
Remarks
Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
DoAction Method (SAMLSPServer Component)
Performs an additional action.
Syntax
function DoAction(ActionID: String; ActionParams: String): String;
Remarks
DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
GetClientBuffer Method (SAMLSPServer Component)
Obtains a pending connection buffer.
Syntax
function GetClientBuffer(ConnectionID: Int64): TBytes;
Remarks
Use this method to obtain a pending connection buffer from your WriteFile event handler. The connection buffer contains data that have been received from the client but has not been written to the file yet.
GetProviderProperty Method (SAMLSPServer Component)
Returns the value of a custom provider property.
Syntax
function GetProviderProperty(Name: String): String;
Remarks
This method, together with SetProviderProperty, provides an extensible way of managing the Service Provider's settings that are not available through the primary properties of the component. As SAML usage scenarios evolve and new providers appear, the list of supported properties can be extended.
The following properties are currently supported:
- ContactPerson
- OrganizationName
- OrganizationDisplayName
- OrganizationURL
- OrganizationLang
LoadIDPMetadata Method (SAMLSPServer Component)
Loads the metadata required for information exchange with the identity provider.
Syntax
procedure LoadIDPMetadata(FileName: String);
Remarks
The Identity provider (IdP) may have different options and requirements for interactions with the Service Provider (SP). Usually all these options together with X.509 certificates needed for data exchange are stored in XML metadata files. Use this method to load metadata from a file generated by an IdP.
FileName specifies the metadata file name.
LoadIDPMetadataFromStream Method (SAMLSPServer Component)
Loads the metadata required for information exchange with the identity provider.
Syntax
procedure LoadIDPMetadataFromStream(Stream: TStream);
Remarks
The Identity provider (IdP) may have different options and requirements for interactions with the Service Provider (SP). Usually all these options together with X.509 certificates needed for data exchange are stored as XML metadata. Use this method to load the metadata generated by the IdP from a stream.
Stream contains the metadata.
ProcessGenericRequest Method (SAMLSPServer Component)
Processes a generic HTTP SAML request.
Syntax
function ProcessGenericRequest(Request: TBytes): TBytes;
Remarks
Use this method to process a generic well-formed HTTP SAML request obtained elsewhere. This is a handy mechanism to bind the SAML processor to an external web engine.
The Request parameter is expected to contain a full HTTP request, including the HTTP method string (GET, POST) and all the headers. The returned value contains a full HTTP response that should be supplied back to the requestor. You can edit some parts of the response (for example, by adding some custom HTTP headers).
You can use this method with or without the OfflineMode.
SaveMetadata Method (SAMLSPServer Component)
Saves the SP configuration to a metadata file.
Syntax
procedure SaveMetadata(FileName: String);
Remarks
Use this method to save the Service Provider (SP) configuration in the form of XML metadata in the file specified by FileName. This file may be transferred to identity providers (IdP) to adjust their interaction processes.
SaveMetadataToStream Method (SAMLSPServer Component)
Saves the SP configuration to a metadata file.
Syntax
procedure SaveMetadataToStream(Stream: TStream);
Remarks
Use this method to save the Service Provider (SP) configuration in the form of XML metadata in the Stream. This metadata may be transferred to identity providers (IdP) to adjust their interaction processes.
SetClientBuffer Method (SAMLSPServer Component)
Commits a data buffer to the connection.
Syntax
procedure SetClientBuffer(ConnectionID: Int64; Value: TBytes);
Remarks
Use this method from your ReadFile event handler to commit a chunk of file data to the server component.
SetProviderProperty Method (SAMLSPServer Component)
Sets the value of a custom provider property.
Syntax
procedure SetProviderProperty(Name: String; Value: String);
Remarks
This method, together with GetProviderProperty, provides an extensible way of managing the Service Provider's settings that are not available through the primary properties of the component. As SAML usage scenarios evolve and new providers appear, the list of supported properties can be extended.
The following properties are currently supported:
- ContactPerson
- OrganizationName
- OrganizationDisplayName
- OrganizationURL
- OrganizationLang
Start Method (SAMLSPServer Component)
Starts the SP server.
Syntax
procedure Start();
Remarks
Use this method to start listening for incoming connections.
Stop Method (SAMLSPServer Component)
Stops the IdP server.
Syntax
procedure Stop();
Remarks
Call this method to stop listening for incoming connections.
Accept Event (SAMLSPServer Component)
Reports an incoming connection.
Syntax
type TAcceptEvent = procedure ( Sender: TObject; const RemoteAddress: String; RemotePort: Integer; var Accept: Boolean ) of Object;
property OnAccept: TAcceptEvent read FOnAccept write FOnAccept;
Remarks
This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.
Subscribe to Connect event to be notified of every connection that has been set up.
AssertionCreated Event (SAMLSPServer Component)
Notifies the application about the creation of a new assertion.
Syntax
type TAssertionCreatedEvent = procedure ( Sender: TObject; ConnectionID: Int64; AssertionOrigin: Integer; const AssertionType: String; var Content: String ) of Object;
property OnAssertionCreated: TAssertionCreatedEvent read FOnAssertionCreated write FOnAssertionCreated;
Remarks
Use this event to track the creation of a new SAML assertion (upon request from the browser or the IdP).
The ConnectionID identifies the connection that requested the assertion. AssertionOrigin and AssertionType specify the type of assertion that was prepared and its disposition, and Content contains the body of the assertion. You can alter the body if required, but please keep in mind that changes may invalidate signed assertions.
saoUnknown | 0 | Unknown origin |
saoRequest | 1 | The assertion is part of a SAML request |
saoResponse | 2 | The assertion is part of a SAML response |
AssertionReceived Event (SAMLSPServer Component)
Notifies the user code about the receipt of an assertion.
Syntax
type TAssertionReceivedEvent = procedure ( Sender: TObject; ConnectionID: Int64; AssertionOrigin: Integer; var Content: String ) of Object;
property OnAssertionReceived: TAssertionReceivedEvent read FOnAssertionReceived write FOnAssertionReceived;
Remarks
Use this event to track the receipt of a SAML assertion from the remote party.
The ConnectionID identifies the connection that requested the assertion. AssertionOrigin specifies the disposition of the assertion, and Content contains its body. You can alter the body if required, but please keep in mind that changes may invalidate signed assertions.
saoUnknown | 0 | Unknown origin |
saoRequest | 1 | The assertion is part of a SAML request |
saoResponse | 2 | The assertion is part of a SAML response |
Connect Event (SAMLSPServer Component)
Reports an accepted connection.
Syntax
type TConnectEvent = procedure ( Sender: TObject; ConnectionId: Int64; const RemoteAddress: String; RemotePort: Integer ) of Object;
property OnConnect: TConnectEvent read FOnConnect write FOnConnect;
Remarks
The component fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as SessionClosed or SessionEstablished.
Disconnect Event (SAMLSPServer Component)
Fires to report a disconnected client.
Syntax
type TDisconnectEvent = procedure ( Sender: TObject; ConnectionID: Int64 ) of Object;
property OnDisconnect: TDisconnectEvent read FOnDisconnect write FOnDisconnect;
Remarks
The component fires this event when a connected client disconnects.
Error Event (SAMLSPServer Component)
Information about errors during data delivery.
Syntax
type TErrorEvent = procedure ( Sender: TObject; ErrorCode: Integer; const Description: String ) of Object;
property OnError: TErrorEvent read FOnError write FOnError;
Remarks
The event is fired in case of exceptional conditions during message processing.
ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the section.
ExternalSign Event (SAMLSPServer Component)
Handles remote or external signing initiated by the server protocol.
Syntax
type TExternalSignEvent = procedure ( Sender: TObject; ConnectionID: Int64; const OperationId: String; const HashAlgorithm: String; const Pars: String; const Data: String; var SignedData: String ) of Object;
property OnExternalSign: TExternalSignEvent read FOnExternalSign write FOnExternalSign;
Remarks
Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.
The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.
OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.
The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.
A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16
A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following:
signer.OnExternalSign += (s, e) =>
{
var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable);
var key = (RSACryptoServiceProvider)cert.PrivateKey;
var dataToSign = e.Data.FromBase16String();
var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1");
e.SignedData = signedData.ToBase16String();
};
MetadataRequest Event (SAMLSPServer Component)
Notifies the application about the metadata request.
Syntax
type TMetadataRequestEvent = procedure ( Sender: TObject; ConnectionID: Int64; var Metadata: String ) of Object;
property OnMetadataRequest: TMetadataRequestEvent read FOnMetadataRequest write FOnMetadataRequest;
Remarks
The component uses this event to notify the application about an incoming metadata request. The suggested metadata text is provided through the Metadata parameter. The application can adjust it as required if it needs to.
Notification Event (SAMLSPServer Component)
This event notifies the application about an underlying control flow event.
Syntax
type TNotificationEvent = procedure ( Sender: TObject; const EventID: String; const EventParam: String ) of Object;
property OnNotification: TNotificationEvent read FOnNotification write FOnNotification;
Remarks
The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.
ResourceClose Event (SAMLSPServer Component)
Tells the application that it can close the opened resource.
Syntax
type TResourceCloseEvent = procedure ( Sender: TObject; ConnectionID: Int64 ) of Object;
property OnResourceClose: TResourceCloseEvent read FOnResourceClose write FOnResourceClose;
Remarks
The component uses this event to notify the application that it can now close the resource opened earlier in its ResourceOpen handler.
After closing the resource, set the OperationStatus according to the outcome of the operation.
ostOk | 1 | |
ostNoSuchFile | 2 | |
ostAccessDenied | 3 | |
ostWriteProtect | 4 | |
ostUnsupported | 5 | |
ostInvalidParameter | 6 | |
ostEOF | 7 |
ResourceOpen Event (SAMLSPServer Component)
Requests the application to open the requested resource.
Syntax
type TResourceOpenEvent = procedure ( Sender: TObject; ConnectionID: Int64; const URL: String; var OperationStatus: Integer ) of Object;
property OnResourceOpen: TResourceOpenEvent read FOnResourceOpen write FOnResourceOpen;
Remarks
The component fires this event in virtualized mode if the application had returned the fraCustom modifier from the earlier ResourceRequest event call. Your code is expected to open the requested resource and be prepared to read from it in subsequent ResourceRead event calls. Check the operation status, and alter it, if needed, through the OperationStatus parameter:
ostOk | 1 | |
ostNoSuchFile | 2 | |
ostAccessDenied | 3 | |
ostWriteProtect | 4 | |
ostUnsupported | 5 | |
ostInvalidParameter | 6 | |
ostEOF | 7 |
ResourceRead Event (SAMLSPServer Component)
Requests the application to read from an opened resource.
Syntax
type TResourceReadEvent = procedure ( Sender: TObject; ConnectionID: Int64; Size: Integer; var OperationStatus: Integer ) of Object;
property OnResourceRead: TResourceReadEvent read FOnResourceRead write FOnResourceRead;
Remarks
The component fires this event in virtualized mode to request another chunk of data from the resource opened earlier. The handler of this event should read up to Size bytes from the object, and pass them to the component with a SetClientBuffer call.
Use the OperationStatus parameter to return the operation result back to the server. When the file has been read up to its end, set OperationStatus to ostEOF to tell the components that no more ResourceRead calls are needed.
Set OperationStatus to one of the following values:
ostOk | 1 | |
ostNoSuchFile | 2 | |
ostAccessDenied | 3 | |
ostWriteProtect | 4 | |
ostUnsupported | 5 | |
ostInvalidParameter | 6 | |
ostEOF | 7 |
ResourceRequest Event (SAMLSPServer Component)
Notifies the application that a server resource is requested.
Syntax
type TResourceRequestEvent = procedure ( Sender: TObject; ConnectionID: Int64; const URL: String; var ResProtected: Boolean; var ResSpecial: Boolean; var Action: Integer ) of Object;
property OnResourceRequest: TResourceRequestEvent read FOnResourceRequest write FOnResourceRequest;
Remarks
The component uses this event to notify the application that the connection has requested a server resource.
The URL parameter specifies the resource requested. ResProtected is set to true if the resource is protected by SAML. ResSpecial is set to true if the request is a SAML resource, such as the metadata or an Assertion Consumer Service page. ConnectionID identifies the connected client.
Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code ('virtualize' the request).
Choose Action as one of the following values:
fraAuto | 1 | Handle the requested action automatically by the server |
fraCustom | 2 | Override the action using the user code logic |
fraAbort | 3 | Abort the requested action |
SessionClosed Event (SAMLSPServer Component)
This event is fired when the SP server has closed a session.
Syntax
type TSessionClosedEvent = procedure ( Sender: TObject; ConnectionID: Int64 ) of Object;
property OnSessionClosed: TSessionClosedEvent read FOnSessionClosed write FOnSessionClosed;
Remarks
ConnectionID contains the identifier of the closed session.
SessionEstablished Event (SAMLSPServer Component)
This event is fired when a new session has been established.
Syntax
type TSessionEstablishedEvent = procedure ( Sender: TObject; ConnectionID: Int64; const Username: String ) of Object;
property OnSessionEstablished: TSessionEstablishedEvent read FOnSessionEstablished write FOnSessionEstablished;
Remarks
ConnectionID contains the identifier of the new session, Username specifies the client's address and Username.
SessionStageChanged Event (SAMLSPServer Component)
Notifies the application about the change of SAML session stage.
Syntax
type TSessionStageChangedEvent = procedure ( Sender: TObject; ConnectionID: Int64; const Session: String; const Stage: String ) of Object;
property OnSessionStageChanged: TSessionStageChangedEvent read FOnSessionStageChanged write FOnSessionStageChanged;
Remarks
component uses this method to notify your code about changed SAML session stage. The Session parameter specifies the session ID. The Stage parameter can take one of the following values:
- Start
- AuthnRequestSent
- ResponseReceived
- ResourceSupplied
- LogoutRequestSent
- LogoutResponseReceived
- LogoutRequestRecv
- LogoutResponseSent
- ArtifactResolveRecv
- ArtifactResponseSent
- Finish
Certificate Type
Provides details of an individual X.509 certificate.
Remarks
This type provides access to X.509 certificate details.
Fields
Bytes TBytes |
Returns raw certificate data in DER format. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CA Boolean |
Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CAKeyID TBytes |
A unique identifier (fingerprint) of the CA certificate's private key. Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CRLDistributionPoints String |
Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Curve String |
Specifies the elliptic curve of the EC public key.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fingerprint TBytes |
Contains the fingerprint (a hash imprint) of this certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FriendlyName String |
Contains an associated alias (friendly name) of the certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Handle Int64 |
Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise. When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object
after such operation.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HashAlgorithm String |
Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Issuer String |
The common name of the certificate issuer (CA), typically a company name. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
IssuerRDN String |
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyAlgorithm String |
Specifies the public key algorithm of this certificate.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyBits Integer |
Returns the length of the public key. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyFingerprint TBytes |
Returns a fingerprint of the public key contained in the certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyUsage Integer |
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set. This value is a bit mask of the following values:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyValid Boolean |
Returns True if the certificate's key is cryptographically valid, and False otherwise. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OCSPLocations String |
Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
OCSPNoCheck Boolean |
Accessor to the value of the certificates ocsp-no-check extension. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Origin Integer |
Returns the origin of this certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PolicyIDs String |
Contains identifiers (OIDs) of the applicable certificate policies. The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyBytes TBytes |
Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyExists Boolean |
Indicates whether the certificate has an associated private key. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PrivateKeyExtractable Boolean |
Indicates whether the private key is extractable |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyBytes TBytes |
Contains the certificate's public key in DER format. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
QualifiedStatements TsbxQualifiedStatementsTypes |
Returns the qualified status of the certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SelfSigned Boolean |
Indicates whether the certificate is self-signed (root) or signed by an external CA. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SerialNumber TBytes |
Returns the certificate's serial number. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SigAlgorithm String |
Indicates the algorithm that was used by the CA to sign this certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject String |
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SubjectAlternativeName String |
Returns or sets the value of the Subject Alternative Name extension of the certificate. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SubjectKeyID TBytes |
Contains a unique identifier (fingerprint) of the certificate's private key. Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SubjectRDN String |
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ValidFrom String |
The time point at which the certificate becomes valid, in UTC. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ValidTo String |
The time point at which the certificate expires, in UTC. |
Constructors
>
constructor Create();
Creates a new object with default field values.
ExternalCrypto Type
Specifies the parameters of external cryptographic calls.
Remarks
External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.
Fields
AsyncDocumentID String |
Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls. Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CustomParams String |
Custom parameters to be passed to the signing service (uninterpreted). |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Data String |
Additional data to be included in the async state and mirrored back by the requestor |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ExternalHashCalculation Boolean |
Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HashAlgorithm String |
Specifies the request's signature hash algorithm.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeyID String |
The ID of the pre-shared key used for DC request authentication. Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself. The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted. Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users. Example:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
KeySecret String |
The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work. Read more about configuring authentication in the KeyID topic. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Method TsbxAsyncSignMethods |
Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup. Available options:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mode TsbxExternalCryptoModes |
Specifies the external cryptography mode. Available options:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PublicKeyAlgorithm String |
Provide public key algorithm here if the certificate is not available on the pre-signing stage.
|
Constructors
>
constructor Create();
Creates a new ExternalCrypto object with default field values.
SocketSettings Type
A container for the socket settings.
Remarks
This type is a container for socket-layer parameters.
Fields
DNSMode TsbxDNSResolveModes |
Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
|
||||||||
DNSPort Integer |
Specifies the port number to be used for sending queries to the DNS server. |
||||||||
DNSQueryTimeout Integer |
The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout. |
||||||||
DNSServers String |
The addresses of DNS servers to use for address resolution, separated by commas or semicolons. |
||||||||
DNSTotalTimeout Integer |
The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout. |
||||||||
IncomingSpeedLimit Integer |
The maximum number of bytes to read from the socket, per second. |
||||||||
LocalAddress String |
The local network interface to bind the socket to. |
||||||||
LocalPort Integer |
The local port number to bind the socket to. |
||||||||
OutgoingSpeedLimit Integer |
The maximum number of bytes to write to the socket, per second. |
||||||||
Timeout Integer |
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful. If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack). |
||||||||
UseIPv6 Boolean |
Enables or disables IP protocol version 6. |
Constructors
>
constructor Create();
Creates a new SocketSettings object.
TLSSettings Type
A container for TLS connection settings.
Remarks
TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.
Fields
AutoValidateCertificates Boolean |
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules. |
|||||||||||||||||||||||||||||||||
BaseConfiguration TsbxSecureTransportPredefinedConfigurations |
Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.
|
|||||||||||||||||||||||||||||||||
Ciphersuites String |
A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once. Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:
|
|||||||||||||||||||||||||||||||||
ECCurves String |
Defines the elliptic curves to enable. |
|||||||||||||||||||||||||||||||||
Extensions String |
Provides access to TLS extensions. |
|||||||||||||||||||||||||||||||||
ForceResumeIfDestinationChanges Boolean |
Whether to force TLS session resumption when the destination address changes. |
|||||||||||||||||||||||||||||||||
PreSharedIdentity String |
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated. |
|||||||||||||||||||||||||||||||||
PreSharedKey String |
Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16. |
|||||||||||||||||||||||||||||||||
PreSharedKeyCiphersuite String |
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation. |
|||||||||||||||||||||||||||||||||
RenegotiationAttackPreventionMode TsbxRenegotiationAttackPreventionModes |
Selects renegotiation attack prevention mechanism. The following options are available:
|
|||||||||||||||||||||||||||||||||
RevocationCheck TsbxRevocationCheckKinds |
Specifies the kind(s) of revocation check to perform. Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time. There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs). This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The 'crcAll*' modes are much stricter, and may be used in scenarios where bulletproof validity information is essential. |
|||||||||||||||||||||||||||||||||
SSLOptions Integer |
Various SSL (TLS) protocol options, set of
|
|||||||||||||||||||||||||||||||||
TLSMode TsbxSSLModes |
Specifies the TLS mode to use.
|
|||||||||||||||||||||||||||||||||
UseExtendedMasterSecret Boolean |
Enables Extended Master Secret Extension, as defined in RFC 7627. |
|||||||||||||||||||||||||||||||||
UseSessionResumption Boolean |
Enables or disables TLS session resumption capability. |
|||||||||||||||||||||||||||||||||
Versions Integer |
Th SSL/TLS versions to enable by default.
|
Constructors
>
constructor Create();
Creates a new TLSSettings object.
Config Settings (SAMLSPServer Component)
The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.SAMLSPServer Config Settings | ||||||||||||||||||||||||||||||
BoundPort: The port that was bound by the server.Returns the port number that was bound by the server. | ||||||||||||||||||||||||||||||
DualStack: Allows the use of ip4 and ip6 simultaneously.This setting specifies a socket can use ip4 and ip6 simultaneously. | ||||||||||||||||||||||||||||||
HandshakeTimeout: The HTTPS handshake timeout.The HTTPS handshake timeout in milliseconds. | ||||||||||||||||||||||||||||||
MaxIssueInstantTimeDiff: The maximum issue-instant time delta.This property specifies the maximum time delta for serving issue-instant requests, in milliseconds. The default value is 30000. | ||||||||||||||||||||||||||||||
PortRangeFrom: The lower bound of allowed port scope to listen on.Specifies the lowest port number the server may use if dynamic allocation is used. | ||||||||||||||||||||||||||||||
PortRangeTo: The higher bound of allowed port scope to listen on.Specifies the highest port number the server may use if dynamic allocation is used. | ||||||||||||||||||||||||||||||
SendBufferSize: The network send buffer size.Specifies the size of the output buffer. | ||||||||||||||||||||||||||||||
ServerName: Specifies the server name for the created responses.Use this property to specify the server name to be included in the generated responses. | ||||||||||||||||||||||||||||||
SessionTimeout: The HTTP session timeout.The HTTP session timeout in milliseconds. | ||||||||||||||||||||||||||||||
SessionTTL: The SAML session time-to-live value.The SAML session time-to-live value, in milliseconds. The default value is 600000 (10 minutes). | ||||||||||||||||||||||||||||||
TempPath: Path for storing temporary files.This setting specifies an absolute path to the location on disk where temporary files are stored. | ||||||||||||||||||||||||||||||
Base Config Settings | ||||||||||||||||||||||||||||||
CheckKeyIntegrityBeforeUse:
Enables or disable private key integrity check before use.This global property enables or disables private key material check before each signing operation. This slows down performance a bit,
but prevents a selection of attacks on RSA keys where keys with unknown origins are used.
You can switch this property off to improve performance if your project only uses known, good private keys. |
||||||||||||||||||||||||||||||
CookieCaching:
Specifies whether a cookie cache should be used for HTTP(S) transports.Set this property to enable or disable cookies caching for the component.
Supported values are:
|
||||||||||||||||||||||||||||||
Cookies: Gets or sets local cookies for the component (supported for HTTPClient, RESTClient and SOAPClient only).Use this property to get cookies from the internal cookie storage of the component and/or restore them back between application sessions. | ||||||||||||||||||||||||||||||
DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided. | ||||||||||||||||||||||||||||||
EnableClientSideSSLFFDHE:
Enables or disables finite field DHE key exchange support in TLS clients.This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower
algorithm if compared to EC DHE; enabling it may result in slower connections.
This setting only applies to sessions negotiated with TLS version 1.3. |
||||||||||||||||||||||||||||||
GlobalCookies: Gets or sets global cookies for all the HTTP transports.Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the components that have its CookieCaching property set to "global". | ||||||||||||||||||||||||||||||
HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other components. | ||||||||||||||||||||||||||||||
LogDestination:
Specifies the debug log destination.Contains a comma-separated list of values that specifies where debug log should be dumped.
Supported values are:
|
||||||||||||||||||||||||||||||
LogDetails:
Specifies the debug log details to dump.Contains a comma-separated list of values that specifies which debug log details to dump.
Supported values are:
|
||||||||||||||||||||||||||||||
LogFile: Specifies the debug log filename.Use this property to provide a path to the log file. | ||||||||||||||||||||||||||||||
LogFilters:
Specifies the debug log filters.Contains a comma-separated list of value pairs ("name:value") that describe filters.
Supported filter names are:
|
||||||||||||||||||||||||||||||
LogFlushMode:
Specifies the log flush mode.Use this property to set the log flush mode. The following values are defined:
|
||||||||||||||||||||||||||||||
LogLevel:
Specifies the debug log level.Use this property to provide the desired debug log level.
Supported values are:
|
||||||||||||||||||||||||||||||
LogMaxEventCount:
Specifies the maximum number of events to cache before further action is taken.Use this property to specify the log event number threshold. This threshold may have different effects,
depending on the rotation setting and/or the flush mode.
The default value of this setting is 100. |
||||||||||||||||||||||||||||||
LogRotationMode:
Specifies the log rotation mode.Use this property to set the log rotation mode. The following values are defined:
|
||||||||||||||||||||||||||||||
MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks. | ||||||||||||||||||||||||||||||
OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful. | ||||||||||||||||||||||||||||||
StaticDNS:
Specifies whether static DNS rules should be used.Set this property to enable or disable static DNS rules for the component. Works only if UseOwnDNSResolver is set to true.
Supported values are:
|
||||||||||||||||||||||||||||||
StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.Use this property to get or set an IP address for the specified domain name in the internal (of the component) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character. | ||||||||||||||||||||||||||||||
StaticIPAddresses: Gets or sets all the static DNS rules.Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the component is set to "local", the property returns/restores the rules from/to the internal storage of the component. If StaticDNS of the component is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format. | ||||||||||||||||||||||||||||||
Tag: Allows to store any custom data.Use this config property to store any custom data. | ||||||||||||||||||||||||||||||
UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one. | ||||||||||||||||||||||||||||||
UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.Set this global property to false to make each validation run use its own copy of system certificate stores. | ||||||||||||||||||||||||||||||
UseSystemOAEPAndPSS:
Enforces or disables the use of system-driven RSA OAEP and PSS computations.This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable.
If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations
using its own OAEP/PSS implementation.
This setting only applies to certificates originating from a Windows system store. |
||||||||||||||||||||||||||||||
UseSystemRandom: Enables or disables the use of the OS PRNG.Use this global property to enable or disable the use of operating system-driven pseudorandom number generation. |
Trappable Errors (SAMLSPServer Component)
SAMLSPServer Errors
1048577 Invalid parameter value (SB_ERROR_INVALID_PARAMETER) | |
1048578 Component is configured incorrectly (SB_ERROR_INVALID_SETUP) | |
1048579 Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE) | |
1048580 Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE) | |
1048581 Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY) | |
1048581 Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) | |
30408705 Invalid binging name (SB_ERROR_SAML_INVALID_BINDING_NAME) | |
30408706 Invalid binding type (SB_ERROR_SAML_INVALID_BINDING_TYPE) | |
30408707 Base directory not set (SB_ERROR_SAML_SP_BASE_DIRECTORY_NOT_SET) |