ArchiveWriter Class

Properties   Methods   Events   Config Settings   Errors  

The ArchiveWriter class allows compressing, updating and modifying files for zip, tar, gzip and bzip2 archives.

Syntax

secureblackbox.Archivewriter

Remarks

Use ArchiveWriter to compress, update, and modify files in archives.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

ArchiveTypeThe type of the archive.
CompressionAlgorithmSpecifies the compression algorithm to use when forming the ZIP archive.
CompressionLevelThe compression level to apply to the archived data.
DecryptionCertificatesA collection of decryption certificates.
DecryptionPasswordThe decryption password.
EncryptionAlgorithmSpecifies the encryption algorithm to apply to the archive.
EncryptionCertificateThe encryption certificate.
EncryptionKeyLengthThe length of the encryption key.
EncryptionPasswordSpecifies the archive encryption password.
EncryptionTypeThe type of encryption to apply to the archive.
FileDataThe contents of the file being added to the archive.
FilesLists the contents of the archive.
FileStreamThe contents of the file being added to the archive, in a stream.
FIPSModeReserved.
NewArchiveIndicates whether the archive object represents a new (rather than opened) archive.
OpenedIndicates whether class is currently in edit mode.
SigningCertificateThe certificate to be used for signing.
SigningChainThe signing certificate chain.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

AddEmptyDirAdds an empty folder to the archive.
AddFileAdds a file to the archive.
AddFilesAdds a group of files to the archive.
AddVirtualAdds a file placeholder to the archive.
CloseCloses the archive.
ConfigSets or retrieves a configuration setting.
CreateNewCreates a new archive.
DoActionPerforms an additional action.
OpenOpens an archive file.
OpenBytesLoads an archive file from a byte array.
OpenStreamLoads an archive file from a stream.
RemoveRemoves file(s) and/or folder(s) from the archive.
SaveCompresses the archive and saves it to a file.
SaveBytesCompresses the archive and saves it to a byte array.
SaveStreamCompresses the archive and saves it to a stream.
UpdateFileUpdates an existing compressed entry with a fresher local version.
UpdateFilesUpdates a selection of files in the archive.
UpdateVirtualUpdates an entry in the archive with on-the-fly content.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

AfterCompressFileMarks the completion of compression of a file.
BeforeCompressFileMarks the start of compression of a file.
DecryptionPasswordNeededFires when the class needs a password to decrypt the archive.
ErrorReports information about errors during archive assembling.
NotificationThis event notifies the application about an underlying control flow event.
PrepareFileFires for every file to be compressed before the compression starts.
ProgressReports the progress of data compression.
RecipientFoundSignifies that the archive was found to be encrypted with a digital certificate.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

TempPathPath for storing temporary files.
UsePaxEnables use of PAX algorithm when creating TAR directories.
UseUStarEnables use of UStar variant of file name packaging when creating TAR directories.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

ArchiveType Property (ArchiveWriter Class)

The type of the archive.

Syntax


public int getArchiveType();



Enumerated values:
  public final static int aftUnknown = 0;
  public final static int aftZip = 1;
  public final static int aftGzip = 2;
  public final static int aftBzip2 = 3;
  public final static int aftTar = 4;
  public final static int aftTarGzip = 5;
  public final static int aftTarBzip2 = 6;
  public final static int aftSFX = 7;

Default Value

0

Remarks

This property indicates the type of the opened archive.

This property is read-only.

CompressionAlgorithm Property (ArchiveWriter Class)

Specifies the compression algorithm to use when forming the ZIP archive.

Syntax


public int getCompressionAlgorithm();


public void setCompressionAlgorithm(int compressionAlgorithm);

Default Value

8

Remarks

Use this property to select the compression algorithm to be used when creating a ZIP archive.

A typical choice is DEFLATE, which is the default setting. Some implementations also use STORED as an alternative where no compression is required (so the resulting archive is effectively an uncompressed directory of files).

acaStored0STORED

acaShrunk1SHRUNK

acaReduce12REDUCE_1

acaReduce23REDUCE_2

acaReduce34REDUCE_3

acaReduce45REDUCE_4

acaImplode6IMPLODE

acaTokenizing7Tokenizing

acaDeflate8Deflate

acaDeflate649Deflate64

acaTerseOld10TERSE (old)

acaBzip212Bzip2

acaLzma14LZMA

acaTerseNew18TERSE (new)

acaLz7719LZ77

acaWavPack97WAVPACK

acaPPMDv198PPMD v1

acaWinzipAES99WinZIP AES

acaUnknown65535Unknown or unsupported algorithm

CompressionLevel Property (ArchiveWriter Class)

The compression level to apply to the archived data.

Syntax


public int getCompressionLevel();


public void setCompressionLevel(int compressionLevel);

Default Value

6

Remarks

Use this property to specify the compression level to apply to the archived data.

DecryptionCertificates Property (ArchiveWriter Class)

A collection of decryption certificates.

Syntax


public CertificateList getDecryptionCertificates();


public void setDecryptionCertificates(CertificateList decryptionCertificates);

Remarks

Use this property to provide a collection of decryption certificates. All certificates should contain their respective private keys.

When processing an encrypted document, the class will walk through the certificate list to locate the matching decryption certificate. If no such certificate is found, it will fire DecryptionInfoNeeded event to request it.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

DecryptionPassword Property (ArchiveWriter Class)

The decryption password.

Syntax


public String getDecryptionPassword();


public void setDecryptionPassword(String decryptionPassword);

Default Value

""

Remarks

Use this property to provide the decryption password. You can assign it explicitly before commencing file extraction, or provide it on the fly from DecryptionPasswordNeeded event handler.

EncryptionAlgorithm Property (ArchiveWriter Class)

Specifies the encryption algorithm to apply to the archive.

Syntax


public String getEncryptionAlgorithm();


public void setEncryptionAlgorithm(String encryptionAlgorithm);

Default Value

""

Remarks

Use this property to specify the encryption algorithm to apply to the archive.

Class supports the following algorithms: AES128, AES192, AES256, BLOWFISH, TWOFISH, 3DES, 3DES112, DES, RC2, RC4. Note that not all of them may be supported by the processing software.

EncryptionCertificate Property (ArchiveWriter Class)

The encryption certificate.

Syntax


public Certificate getEncryptionCertificate();


public void setEncryptionCertificate(Certificate encryptionCertificate);

Remarks

Use this property to provide the encryption certificate.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

EncryptionKeyLength Property (ArchiveWriter Class)

The length of the encryption key.

Syntax


public int getEncryptionKeyLength();


public void setEncryptionKeyLength(int encryptionKeyLength);

Default Value

0

Remarks

Use this setting to specify the length of the encryption key in bits.

EncryptionPassword Property (ArchiveWriter Class)

Specifies the archive encryption password.

Syntax


public String getEncryptionPassword();


public void setEncryptionPassword(String encryptionPassword);

Default Value

""

Remarks

Use this property to provide the password to encrypt the archive with. Use it alongside EncryptionType and EncryptionAlgorithm properties to set up the whole set of protection settings for the archive.

EncryptionType Property (ArchiveWriter Class)

The type of encryption to apply to the archive.

Syntax


public int getEncryptionType();


public void setEncryptionType(int encryptionType);


Enumerated values:
  public final static int aetDefault = 0;
  public final static int aetNoEncryption = 1;
  public final static int aetGeneric = 2;
  public final static int aetWinZip = 3;
  public final static int aetStrong = 4;

Default Value

0

Remarks

Specifies the encryption type for the archive.

FileData Property (ArchiveWriter Class)

The contents of the file being added to the archive.

Syntax


public byte[] getFileData();


public void setFileData(byte[] fileData);

Remarks

Assign this property with a byte array containing the contents of the file being added, if you set the corresponding entry's DataSource to fdsBuffer.

Use FileStream property, with DataSource set to fdsStream, to provide the data in a stream instead. Alternatively, use fdsFile data source to supply the file data in a disk file.

This property is not available at design time.

Files Property (ArchiveWriter Class)

Lists the contents of the archive.

Syntax


public ArchivedFileList getFiles();


Remarks

This colletction property provides access to all files contained in the archive, both existing and newly added.

Use it to view or adjust properties of specific files, alter their data sources, and tune up actions to be performed on them.

This property is read-only and not available at design time.

Please refer to the ArchivedFile type for a complete list of fields.

FileStream Property (ArchiveWriter Class)

The contents of the file being added to the archive, in a stream.

Syntax


public java.io.InputStream getFileStream();


public void setFileStream(java.io.InputStream fileStream);

Default Value

null

Remarks

Assign a stream containing the contents of the file being added to the archive to this property. Remember to assign the entry's DataSource field to fdsStream.

This property is not available at design time.

FIPSMode Property (ArchiveWriter Class)

Reserved.

Syntax


public boolean isFIPSMode();


public void setFIPSMode(boolean FIPSMode);

Default Value

False

Remarks

This property is reserved for future use.

NewArchive Property (ArchiveWriter Class)

Indicates whether the archive object represents a new (rather than opened) archive.

Syntax


public boolean isNewArchive();


Default Value

False

Remarks

This property is set to true if the archive is new, or to false if the class control is editing an existing archive.

NewArchive would typically be set to true after a CreateNew call, and to false after an Open call.

This property is read-only.

Opened Property (ArchiveWriter Class)

Indicates whether class is currently in edit mode.

Syntax


public boolean isOpened();


Default Value

False

Remarks

This property is set to true if the archive control is in edit mode, meaning it was opened with Open or created with CreateNew call.

When an archive is opened, you can add new files to it, remove existing files, or modify encryption attributes.

This property is read-only.

SigningCertificate Property (ArchiveWriter Class)

The certificate to be used for signing.

Syntax


public Certificate getSigningCertificate();


public void setSigningCertificate(Certificate signingCertificate);

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

SigningChain Property (ArchiveWriter Class)

The signing certificate chain.

Syntax


public CertificateList getSigningChain();


public void setSigningChain(CertificateList signingChain);

Remarks

Use this property to provide the chain for the signing certificate. Use SigningCertificate property, if it is available, to provide the signing certificate itself.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

AddEmptyDir Method (Archivewriter Class)

Adds an empty folder to the archive.

Syntax

public int addEmptyDir(String path);

Remarks

Use this method to added an empty folder to the archive with an internal path of Path.

The method returns the index of the new folder entry in the Files collection.

AddFile Method (Archivewriter Class)

Adds a file to the archive.

Syntax

public int addFile(String path, String localPath);

Remarks

Use this method to add a disk file to the archive. Provide the local path to the file (e.g. C:\Photos\photo.jpg) via the LocalPath parameter, and the desired path within the archive (e.g. PhotosBackup2020/photo.jpg) via the Path parameter.

AddFiles Method (Archivewriter Class)

Adds a group of files to the archive.

Syntax

public void addFiles(String folder, String localPath, boolean recursive);

Remarks

Use this method to add a collection of files to the archive.

Provide the path to the files on a local system (e.g. C:\photos) via the LocalPath parameter, and set Recursive to indicate whether you want to process the subdirectories recursively. Pass the desired mount point for the files within the archive (e.g. Backup2020/photos) via the Folder parameter.

You can use file mask wildcards in LocalPath to only select the files that match the mask.

AddVirtual Method (Archivewriter Class)

Adds a file placeholder to the archive.

Syntax

public int addVirtual(String path);

Remarks

Use this method to add a placeholder for the entry the contents of which is to be provided on the fly from a stream or buffer.

Pass the path to the entry within the archive (e.g. Reports/report2020.csv) via the Path parameter. After the entry has been added, use PrepareFile event or Files property to tune up the type of the data source (file, stream, or memory buffer). During the actual compression, provide the contents of the entry in a stream or buffer in the BeforeCompressFile event handler.

This method returns the index of the new entry in the Files collection.

Close Method (Archivewriter Class)

Closes the archive.

Syntax

public void close();

Remarks

Use this method to close the current archive and dispose of all the allocated resources.

Call this method when you are done with the archive.

Config Method (Archivewriter Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateNew Method (Archivewriter Class)

Creates a new archive.

Syntax

public void createNew(int archiveType);

Remarks

Use this method to create a new archive file. Provide the desired archive type in the ArchiveType parameter.

The following archive types are currently supported:

aftZip (1)The archive contains data in ZIP format.
aftGzip (2)The archive file contains data in GZIP format.
aftBzip2 (3)The archive contains BZIP2 data.
aftTar (4)The archive contains a .tar file.
aftTarGzip (5)The archive contains a .tar.gz file.
aftTarBzip2 (6)The archive contains data in .tar.bz2 format.

The archive will be kept in memory until written down with Save or SaveStream method.

DoAction Method (Archivewriter Class)

Performs an additional action.

Syntax

public String doAction(String actionID, String actionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Open Method (Archivewriter Class)

Opens an archive file.

Syntax

public void open(int archiveType, String archiveName);

Remarks

Use this method to open an existing archive file for modification.

Provide the path to the archive file via the ArchiveName parameter, and pass the archive type in the ArchiveType parameter.

The following archive types are currently supported:

aftUnknown (0)It was not possible to establish the type of the archive file.
aftZip (1)The archive contains data in ZIP format.
aftGzip (2)The archive file contains data in GZIP format.
aftBzip2 (3)The archive contains BZIP2 data.
aftTar (4)The archive contains a .tar file.
aftTarGzip (5)The archive contains a .tar.gz file.
aftTarBzip2 (6)The archive contains data in .tar.bz2 format.

The archive will be kept in memory until written down with Save or SaveStream method.

OpenBytes Method (Archivewriter Class)

Loads an archive file from a byte array.

Syntax

public void openBytes(int archiveType, byte[] archiveBytes);

Remarks

Use this method to load an existing archive file from a byte array.

Provide the archive stream via the ArchiveBytes parameter, and pass the archive type in the ArchiveType parameter.

The following archive types are currently supported:

aftUnknown (0)It was not possible to establish the type of the archive.
aftZip (1)The archive contains data in ZIP format.
aftGzip (2)The archive file contains data in GZIP format.
aftBzip2 (3)The archive contains BZIP2 data.
aftTar (4)The archive contains a .tar file.
aftTarGzip (5)The archive contains a .tar.gz file.
aftTarBzip2 (6)The archive contains data in .tar.bz2 format.

The archive will be kept in memory until written down with Save, SaveStream, or SaveBytes method.

OpenStream Method (Archivewriter Class)

Loads an archive file from a stream.

Syntax

public void openStream(int archiveType, java.io.InputStream archiveStream);

Remarks

Use this method to load an existing archive file from a stream.

Provide the archive stream via the ArchiveStream parameter, and pass the archive type in the ArchiveType parameter.

The following archive types are currently supported:

aftUnknown (0)It was not possible to establish the type of the archive.
aftZip (1)The archive contains data in ZIP format.
aftGzip (2)The archive file contains data in GZIP format.
aftBzip2 (3)The archive contains BZIP2 data.
aftTar (4)The archive contains a .tar file.
aftTarGzip (5)The archive contains a .tar.gz file.
aftTarBzip2 (6)The archive contains data in .tar.bz2 format.

The archive will be kept in memory until written down with Save or SaveStream method.

Remove Method (Archivewriter Class)

Removes file(s) and/or folder(s) from the archive.

Syntax

public void remove(String path);

Remarks

Use this method to remove entries from the archive. Provide an archive-local path via the Path parameter.

Path supports file masks, which makes this method quite powerful (and potentially dangerous).

Save Method (Archivewriter Class)

Compresses the archive and saves it to a file.

Syntax

public void save(String archiveName);

Remarks

Use this method to finalize all preparations, compress all the entries set up in Files collection, and write the created archive to ArchiveName file.

This method carries out a lot of work and fires a number of events during its execution. Before the compression process starts, PrepareFile event fires repeatedly to provide the summary of what is being included into the archive. A handler of that event is a good place to make last-minute modifications to the data sources, file names, and actions to take upon the files.

Compression of each entry is surrounded with BeforeCompressFile and AfterCompressFile "brackets". Subscribe to BeforeCompressFile to supply the file contents for entries with Buffer and Stream data sources. AfterCompressFile is a good place to release the content stream alloated in the BeforeCompressFile event handler.

Progress event fires repeatedly to report the progress of the current and whole operations. It also provides an opportunity to abort the compression process.

SaveBytes Method (Archivewriter Class)

Compresses the archive and saves it to a byte array.

Syntax

public byte[] saveBytes();

Remarks

Use this method to finalize all preparations and compress all entries contained in the Files collection. The method returns the byte array containing the serialized archive.

You can fine-tune the compression process by providing compression details on the fly via the events class fires. See the description of the Save method for the details.

SaveStream Method (Archivewriter Class)

Compresses the archive and saves it to a stream.

Syntax

public void saveStream(java.io.OutputStream archiveStream);

Remarks

Use this method to finalize all preparations and compress all entries contained in the Files collection to ArchiveStream.

You can fine-tune the compression process by providing compression details on the fly via the events class fires. See the description of the Save method for the details.

UpdateFile Method (Archivewriter Class)

Updates an existing compressed entry with a fresher local version.

Syntax

public void updateFile(String path, String localPath);

Remarks

Call this method to update the Path entry in the archive with a fresher entry at LocalPath.

UpdateFiles Method (Archivewriter Class)

Updates a selection of files in the archive.

Syntax

public void updateFiles(String folder, String localPath, boolean addMissingFiles, boolean removeMissingFiles, boolean recursive);

Remarks

This method is a powerful way to update a subset of files in the archive in accordance with a specified criteria.

Pass an archive-local name of the folder to update via the Folder parameter, and the system-local version of the same folder via the LocalPath parameter. Set AddMissingFiles and RemoveMissingFiles as needed to force inclusion of files missing from the archive, or removal of files missing locally, accordingly.

The Recursive parameter specifies whether the directory should be browsed recursively.

UpdateVirtual Method (Archivewriter Class)

Updates an entry in the archive with on-the-fly content.

Syntax

public void updateVirtual(String path);

Remarks

Use this method to update content of an existing archive entry. Pass the archive-local entry path via the Path parameter. After updating the entry, tune up its DataSource property in accordance with the desired content origin. Subscribe to BeforeCompressFile to supply the actual data via FileData or FileStream properties.

AfterCompressFile Event (Archivewriter Class)

Marks the completion of compression of a file.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void afterCompressFile(ArchivewriterAfterCompressFileEvent e) {}
  ...
}

public class ArchivewriterAfterCompressFileEvent {
  public String path;
  public long fileSize;
  public int dataSource;
}

Remarks

Subscribe to this event to get notified about the completion of compression of a file.

The Path parameter specifies the internal path to the entry inside the archive. The FileSize indicates the size of the file before compression, and the DataSource specifies the type of the source media.

fdsFile (0)The data was taken from a file.
fdsStream (1)The data was taken from a stream assigned to FileStream property.
fdsBuffer (2)The file data taken from the FileData buffer.

BeforeCompressFile Event (Archivewriter Class)

Marks the start of compression of a file.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void beforeCompressFile(ArchivewriterBeforeCompressFileEvent e) {}
  ...
}

public class ArchivewriterBeforeCompressFileEvent {
  public String path;
  public long fileSize;
  public int dataSource;
}

Remarks

Subscribe to this event to be notified about the start of compression of an archive entry. The handler of this event is a good place to prepare the desired data source.

The Path parameter indicates the path to the extracted entry in the archive. The FileSize specifies the size of the file before compression. Use this event handler to adjust the data source if the file is to be loaded from a stream or buffer. The DataSource parameter indicates the type of the data media:

fdsFile (0)The data will be taken from a file indicated by the entry's LocalPath setting. You can change this path in the handler of this event.
fdsStream (1)The file data will be taken from a stream assigned to FileStream property.
fdsBuffer (2)The data will be taken from a buffer attached to the FileData property.
If passing the data from a stream or buffer, use AfterCompressFile to dispose of any objects allocated in this event handler (such as the source stream).

Use PrepareFile event to adjust the file data source on the fly.

DecryptionPasswordNeeded Event (Archivewriter Class)

Fires when the class needs a password to decrypt the archive.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void decryptionPasswordNeeded(ArchivewriterDecryptionPasswordNeededEvent e) {}
  ...
}

public class ArchivewriterDecryptionPasswordNeededEvent {
  public String passwordTarget;
  public boolean cancel;
}

Remarks

Class fires this event to request a decryption password from the application when it comes across an encrypted archive or entry.

Please assign the password to DecryptionPassword property inside the event handler, or set Cancel to true to cancel the operation.

Error Event (Archivewriter Class)

Reports information about errors during archive assembling.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void error(ArchivewriterErrorEvent e) {}
  ...
}

public class ArchivewriterErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The event is fired in case of exceptional conditions during archive formation.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (Archivewriter Class)

This event notifies the application about an underlying control flow event.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void notification(ArchivewriterNotificationEvent e) {}
  ...
}

public class ArchivewriterNotificationEvent {
  public String eventID;
  public String eventParam;
}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

PrepareFile Event (Archivewriter Class)

Fires for every file to be compressed before the compression starts.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void prepareFile(ArchivewriterPrepareFileEvent e) {}
  ...
}

public class ArchivewriterPrepareFileEvent {
  public String path;
  public long fileSize;
  public int dataSource;
  public String localPath;
  public int action;
}

Remarks

Class fires this event for every file included in the Files collection before commencing the compression. This is the last opportunity for your code to adjust the action to be taken for each file and tune up the data sources appropriately.

The Path parameter contains the path to the file within the archive (such as Photos/myphoto.jpg), and the FileSize contains the size of that file before compression.

The DataSource parameter indicates the media from which the file contents is to be taken. A typical default value if fdsFile, but you can adjust the value of that parameter if you need to use an alternative source. The following options are available:

fdsFile (0)The data will be taken from a file indicated by the LocalPath parameter. You can change this path in this event handler.
fdsStream (1)The file data will be taken from a stream assigned to FileStream property.
fdsBuffer (2)The data will be taken from a buffer attached to the FileData property.
Please do not assign FileStream or FileData in this event handler: this should be done further down the road in the BeforeCompressFile event handler. The purpose of this event is to prepare the compression plan by summarizing what should be done and to which files.

The Action parameter, which is also tuneable, indicates the action for class to take on the file:

atAdd (0)Add the file to the archive
atKeep (1)Keep the existing file in the archive
atUpdate (2)Update the archived file with a fresher copy
atDelete (3)Delete the file from the archive
atExtract (4)Extract the file (extraction only)
atSkip (5)Skip file extraction (extraction only)

Progress Event (Archivewriter Class)

Reports the progress of data compression.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void progress(ArchivewriterProgressEvent e) {}
  ...
}

public class ArchivewriterProgressEvent {
  public long processed;
  public long total;
  public long overallProcessed;
  public long overallTotal;
  public boolean cancel;
}

Remarks

Subscribe to this event to be notified about compression progress.

Processed and Total report the progress of compression of the current entry; OverallProcessed and OverallTotal report the progress of the whole operation. Set Cancel to true to stop the operation.

RecipientFound Event (Archivewriter Class)

Signifies that the archive was found to be encrypted with a digital certificate.

Syntax

public class DefaultArchivewriterEventListener implements ArchivewriterEventListener {
  ...
  public void recipientFound(ArchivewriterRecipientFoundEvent e) {}
  ...
}

public class ArchivewriterRecipientFoundEvent {
  public byte[] publicKeyHash;
  public boolean certFound;
}

Remarks

The class fires this event to notify the application that the archive was found to be encrypted with a digital certificate. The hash of the certificate's public key is provided in the PublicKeyHash parameter.

CertFound indicates whether a certificate with a matching public key hash was found in the DecryptionCertificates list. If it wasn't, you need to locate it on the system and add it to that list: class won't be able to decrypt the archive otherwise.

Please note that the certificate must have an associated private key to be capable of decryption.

ArchivedFile Type

Provides information about the compressed file.

Remarks

Use this type to access compressed file details.

Fields

Action
int

Default Value: 0

The action to apply to the file.

Use this property to control the action that should be applied to the file during the compression or extraction. The following actions are supported:

atAdd (0)Add the file to the archive
atKeep (1)Keep the existing file in the archive
atUpdate (2)Update the archived file with a fresher copy
atDelete (3)Delete the file from the archive
atExtract (4)Extract the file (extraction only)
atSkip (5)Skip file extraction (extraction only)

CompressedSize
long (read-only)

Default Value: 0

The size of the file after compression.

DataSource
int

Default Value: 0

The type of the data source for this entry.

Use this property to control the data source for this entry.

fdsFile (0)The data for this entry should be taken from the file provided via LocalPath.
fdsStream (1)The data is going to be provided on-the-fly via the FileStream property.
fdsBuffer (2)The data is going to be provided on-the-fly via the FileData property.

Directory
boolean (read-only)

Default Value: False

Tells if the entry is a directory or a regular file.

EncryptionAlgorithm
String (read-only)

Default Value: ""

Returns the symmetric algorithm that was used to encrypt the file.

EncryptionKeyLength
int (read-only)

Default Value: 0

Returns the length, in bits, of the encryption key.

EncryptionType
int (read-only)

Default Value: 0

The type of encryption applied to the file.

Use this property to find out what kind of encryption was applied to the file.

aetDefault (0)Default encryption (not used for already encrypted files)
aetNoEncryption (1)No encryption
aetGeneric (2)Standard ZIP encryption
aetWinZip (3)WinZIP-based encryption
aetStrong (4)Strong encryption

FileName
String

Default Value: ""

The original name of the compressed file or folder.

Folder
String (read-only)

Default Value: ""

The containing folder of the entry.

LocalPath
String

Default Value: ""

The local path associated with this entry. It typically specifies the source path that the data should be taken from, or the destination it should be extracted to.

MTime
String

Default Value: ""

The entry's last modification time.

NewFile
boolean (read-only)

Default Value: False

Indicates whether the entry corresponds to a file to be added to the archive.

Path
String (read-only)

Default Value: ""

The full internal path of the archived entry.

SignatureCount
int (read-only)

Default Value: 0

The number of signatures covering the entry.

Signed
boolean (read-only)

Default Value: False

Indicates whether the entry is signed.

Size
long (read-only)

Default Value: 0

The size of the file before compression.

Constructors

public ArchivedFile();

Creates a new ArchivedFile object.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

Bytes
byte[] (read-only)

Default Value: ""

Returns raw certificate data in DER format.

CA
boolean

Default Value: False

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

CAKeyID
byte[] (read-only)

Default Value: ""

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

CRLDistributionPoints
String

Default Value: ""

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Curve
String

Default Value: ""

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

Fingerprint
byte[] (read-only)

Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

FriendlyName
String (read-only)

Default Value: ""

Contains an associated alias (friendly name) of the certificate.

HashAlgorithm
String

Default Value: ""

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Issuer
String (read-only)

Default Value: ""

The common name of the certificate issuer (CA), typically a company name.

IssuerRDN
String

Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

KeyAlgorithm
String

Default Value: "0"

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

KeyBits
int (read-only)

Default Value: 0

Returns the length of the public key.

KeyFingerprint
byte[] (read-only)

Default Value: ""

Returns a fingerprint of the public key contained in the certificate.

KeyUsage
int

Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

KeyValid
boolean (read-only)

Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
String

Default Value: ""

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

OCSPNoCheck
boolean

Default Value: False

Accessor to the value of the certificates ocsp-no-check extension.

Origin
int (read-only)

Default Value: 0

Returns the origin of this certificate.

PolicyIDs
String

Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

PrivateKeyBytes
byte[] (read-only)

Default Value: ""

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

PrivateKeyExists
boolean (read-only)

Default Value: False

Indicates whether the certificate has an associated private key.

PrivateKeyExtractable
boolean (read-only)

Default Value: False

Indicates whether the private key is extractable

PublicKeyBytes
byte[] (read-only)

Default Value: ""

Contains the certificate's public key in DER format.

QualifiedStatements
int

Default Value: 0

Returns the qualified status of the certificate.

SelfSigned
boolean (read-only)

Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
byte[]

Default Value: ""

Returns the certificate's serial number.

SigAlgorithm
String (read-only)

Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

Subject
String (read-only)

Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

SubjectAlternativeName
String

Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

SubjectKeyID
byte[]

Default Value: ""

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

SubjectRDN
String

Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

ValidFrom
String

Default Value: ""

The time point at which the certificate becomes valid, in UTC.

ValidTo
String

Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public Certificate( bytes,  startIndex,  count,  password);

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.

public Certificate( certBytes,  certStartIndex,  certCount,  keyBytes,  keyStartIndex,  keyCount,  password);

Loads the X.509 certificate from a memory buffer. CertBytes is a buffer containing the raw certificate data. CertStartIndex and CertCount specify the number of bytes to be read from the buffer, respectively. KeyBytes is a buffer containing the private key data. KeyStartIndex and KeyCount specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.

public Certificate( bytes,  startIndex,  count);

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively.

public Certificate( path,  password);

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data. Password is a password encrypting the certificate.

public Certificate( certPath,  keyPath,  password);

Loads the X.509 certificate from a file. CertPath specifies the full path to the file containing the certificate data. KeyPath specifies the full path to the file containing the private key. Password is a password encrypting the certificate.

public Certificate( path);

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data.

public Certificate( stream);

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public Certificate( stream,  password);

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data. Password is a password encrypting the certificate.

public Certificate( certStream,  keyStream,  password);

Loads the X.509 certificate from a stream. CertStream is a stream containing the certificate data. KeyStream is a stream containing the private key. Password is a password encrypting the certificate.

public Certificate();

Creates a new object with default field values.

Config Settings (Archivewriter Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

ArchiveWriter Config Settings

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

UsePax:   Enables use of PAX algorithm when creating TAR directories.

Use this setting to enable or disable the use of PAX algorithm when TARring directories.

UseUStar:   Enables use of UStar variant of file name packaging when creating TAR directories.

Use this setting to enable or disable the use of UStar file name encoding format. This format allows for correct saving of path names longer than 99 characters in TAR archives.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (Archivewriter Class)