Docs

SecureBlackbox 2022 Java Edition

Version 22.0 [Build 8174]

CAdESVerifier Class

Properties   Methods   Events   Configuration Settings   Errors  

The CAdESVerifier class is used to validate CAdES signatures.

Syntax

secureblackbox.Cadesverifier

Remarks

CAdESVerifier validates electronic signatures that comply with the Electronic Signatures and Infrastructures (ESI) CMS Advanced Electronic Signatures (CAdES) specification.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AllSignaturesValidThe cumulative validity of all signatures.
BlockedCertificatesThe certificates that must be rejected as trust anchors.
CertificatesA collection of certificates included in the electronic signature.
ChainValidationDetailsThe details of a certificate chain validation outcome.
ChainValidationResultThe general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.
ClaimedSigningTimeReturns a signature's claimed signing time.
CompatibilityErrorsReturns compatibility errors encountered during validation.
ContentTypeReturns the signed message's content type.
CountersignedIndicates if the signature is countersigned.
CountersigningCertificateThe certificate that was used to countersign the signature.
CRLsA collection of certificate revocation lists embedded into the signature by the signer.
CurrentCACertificateThe CA of the currently processed certificate.
CurrentCertificateThe certificate that is currently being processed.
DataBytesUse this property to pass the signed data to class in the byte array form.
DataFileA path to the file containing the originally signed data.
DataStreamA stream containing the originally signed data.
FIPSModeReserved.
HashAlgorithmReturns the hash algorithm that was used to calculate the signature.
IgnoreChainValidationErrorsMakes the class tolerant to chain validation errors.
InputBytesUse this property to pass the input to class in the byte array form.
InputFileA path to the file containing the signature blob.
InputStreamA stream containing the signature blob.
InterimValidationDetailsContains the validation details of the moment.
InterimValidationResultContains the validation status of the moment.
KnownCertificatesAdditional certificates for chain validation.
KnownCRLsAdditional CRLs for chain validation.
KnownOCSPsAdditional OCSP responses for chain validation.
LastArchivalTimeIndicates the most recent archival time of an archived signature.
LevelReturns the CAdES signature level.
MessageDigestThe binary of the signature's message digest.
OCSPsA collection of OCSP responses embedded into the signature.
OfflineModeSwitches the class to the offline mode.
OutputBytesUse this property to read the output the class object has produced.
OutputFileA path to the file to write the extracted data to.
OutputStreamA stream where the verified and extracted data should be saved.
PolicyHashThe signature policy hash value.
PolicyIDThe policy ID that was included into the signature.
PolicyURIThe signature policy URI that was included in the signature.
ProfileSpecifies a pre-defined profile to apply when creating the signature.
ProxyThe proxy server settings.
PublicKeyAlgorithmReturns the public key algorithm that was used to create the signature.
QualifiedIndicates a qualified electronic signature.
RevocationCheckSpecifies the kind(s) of revocation check to perform.
SignatureValidationResultThe signature validation result.
SignedAttributesCustom signature attributes that are covered by the electronic signature.
SigningCertificateThe certificate that was used to create the signature.
SocketSettingsManages network connection settings.
TimestampContains the timestamp which is being validated.
TimestampedIndicates whether or not the signature is timestamped.
TLSClientChainThe TLS client certificate chain.
TLSServerChainThe TLS server's certificate chain.
TLSSettingsManages TLS layer settings.
TrustedCertificatesA list of trusted certificates for chain validation.
TSACertificateThe certificate of the Time Stamping Authority.
UnsignedAttributesCustom unsigned attributes included in the electronic signature.
ValidatedSigningTimeContains the certified signing time.
ValidationLogContains the complete log of the certificate validation routine.
ValidationMomentThe time point at which signature validity is to be established.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
DoActionPerforms an additional action.
VerifyVerifies a digitally signed CAdES message.
VerifyDetachedVerifies a detached CAdES signature.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

ChainElementDownloadTBD.
ChainElementNeededTBD.
ChainValidatedReports the completion of a certificate chain validation.
CountersignatureFoundSignifies the start of countersignature validation.
CountersignatureValidatedReports the completion of countersignature validation.
ErrorInformation about errors during CAdES verification.
NotificationThis event notifies the application about an underlying control flow event.
SignatureFoundSignifies the start of signature validation.
SignatureValidatedMarks the completion of the signature validation routine.
TimestampFoundSignifies the start of a timestamp validation routine.
TimestampValidatedReports the completion of the timestamp validation routine.
TLSCertValidateThis event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
ValidationProgressTBD.

Configuration Settings


The following is a list of configuration settings for the class with short descriptions. Click on the links for further details.

AddReferencesToAllUsedCertsAndRevInfowhether to include all certificates and revocation references into the signature.
AddReferencesToIrrevocableCertsWhether references to irrevocable certificates should be included into the signature.
AddReferenceToSigningCertWhether a reference to the signing certificate should be included into the signature.
AllowPartialValidationInfoWhether to allow for missing validation info.
CmsOptAnnexKArchiveTimestampV2ModeToggles use of Annex K method of calculating validation timestamp hashes.
CmsOptCheckATSHashIndexElementsEnables extra checks when processing ATSHashIndex attribute.
CmsOptCompareRDNAsStringsEnforces comparison of RDN elements as text strings, rather than their byte encodings.
CmsOptDigitPADSSCompatibilityEnables Digit PADSS compatibility mode.
CmsOptForceSigningCertificateV2UsageEnforces use of signing-certificate-v2 attribute.
CmsOptIgnoreDERReqInArchiveTimestampsSwitches off DER encoding requirement for archival timestamps.
CmsOptImzagerMIMCompatibilityEnables Imzager MIM compatibility mode.
CmsOptIncludeCertToAttributesRegulates whether to include the signing certificate to the signature as the signing-certificate attribute.
CmsOptIncludeCertToMessageRegulates whether to include the signing certificate and its chain to the CMS.
CmsOptInsertContentTypeRegulates whether the content-type time attribute should be included in the signature structure.
CmsOptInsertMessageDigestsRegulates whether the message-digest signed attribute should be included in the signature structure.
CmsOptInsertSigningTimeRegulates whether the signing-time attribute should be included in the signature structure.
CmsOptSkipEnvContentInfoOnSigArchivalExcludes hashing of enveloped content when calculating an archival timestamp.
CmsOptUseATSHashIndexV1Enables use of ATSHashIndexV1 attribute.
CmsOptUseGeneralizedTimeFormatEnables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.
CmsOptUseGenericSigAlgorithmOIDsEnables use of generic signature algorithm OIDs in the signature.
CmsOptUsePlainContentForTimestampHashesMakes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.
CustomTSLsSpecifies the custom TSLs.
DeepCountersignatureValidationWhether to validate countersignatures.
DeepTimestampValidationWhether to perform deep validation of all timestamps.
ForceCompleteChainValidationWhether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrustedWhether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriodSpecifies a grace period to apply during revocation information checks.
IgnoreChainValidationErrorsMakes the class ignore chain validation issues.
IgnoreOCSPNoCheckExtensionWhether OCSP NoCheck extension should be ignored.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificatesWhether to trust self-signed certificates.
PolicyExplicitTextThe explicit text of the user notice.
PolicyUNNumbersThe noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganizationThe organization part of the NoticeReference qualifier.
PromoteLongOCSPResponsesWhether long OCSP responses are requested.
PSSUsedWhether RSASSA-PSS mode was used.
QualifiedStatusIndicates a qualified electronic signature.
ReportInvalidTimestampsWhether to rise errors on invalid timestamps.
SkipValidationTimestampedSignaturesWhether to validate signatures with validation timestamps.
TempPathPath for storing temporary files.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
TSLDistributionPointsContains XML content of distribution points of the TSL used.
TSLDistributionPoints[Idx]Contains distribution point of the specified index of the TSL used.
TSLHistoricalInformationPeriodContains historical information period of the TSL used.
TSLLegalNoticesContains XML content of legal notices of the TSL used.
TSLLegalNotices[lang]Contains legal notices for the specified language of the TSL used.
TSLListIssueDateTimeContains list issue date and time of the TSL used.
TSLNextUpdateContains next update date and time of the TSL used.
TSLPoliciesContains XML content of policies of the TSL used.
TSLPolicies[lang]Contains policies for the specified language of the TSL used.
TSLSchemeExtensionsContains XML content of scheme extensions of the TSL used.
TSLSchemeExtensions[Idx]Contains XML content of scheme extension of the specified index of the TSL used.
TSLSchemeInformationURIContains XML content of scheme information URI of the TSL used.
TSLSchemeInformationURI[lang]Contains scheme information URI for the specified language of the TSL used.
TSLSchemeNameContains XML content of scheme name of the TSL used.
TSLSchemeName[lang]Contains scheme name for the specified language of the TSL used.
TSLSchemeOperatorAddressContains XML content of scheme operator address of the TSL used.
TSLSchemeOperatorNameContains XML content of scheme operator name of the TSL used.
TSLSchemeOperatorName[lang]Contains scheme operator name for the specified language of the TSL used.
TSLSchemeTerritoryContains scheme territory of the TSL used.
TSLSchemeTypeCommunityRulesContains XML content of scheme type/community/rules of the TSL used.
TSLSchemeTypeCommunityRules[lang]Contains scheme type/community/rules for the specified language of the TSL used.
TSLSequenceNumberContains sequence number of the TSL used.
TSLsRetrieveLogContains the complete log of the TSLs retrieve.
TSLStatusDeterminationApproachContains status determination approach of the TSL used.
TSLsValidationLogContains the complete log of the TSLs validation.
TSLTSPAdditionalServiceInformationContains addtional service information of the TSP service used.
TSLTSPAddressContains XML content of the address of the TSP used.
TSLTSPHistoryInstanceIndicates that TSP service history instance used.
TSLTSPHistoryInstanceAdditionalServiceInformationContains addtional service information of the TSP service history instance used.
TSLTSPHistoryInstanceQualifiersContains list of qualifiers of the TSP service history instance used.
TSLTSPHistoryInstanceServiceInformationExtensionsContains XML content of information extensions of the TSP service history instance used.
TSLTSPHistoryInstanceServiceInformationExtensions[Idx]Contains XML content of information extension of the specified index of the TSP service history instance used.
TSLTSPHistoryInstanceServiceNameContains XML content of name of the TSP service history instance used.
TSLTSPHistoryInstanceServiceName[lang]Contains name for the specified language of the TSP service history instance used.
TSLTSPHistoryInstanceServiceStatusContains status of the TSP service history instance used.
TSLTSPHistoryInstanceServiceStatusStartingTimeContains status starting time of the TSP service history instance used.
TSLTSPHistoryInstanceServiceTypeIdentifierContains type identifier of the TSP service history instance used.
TSLTSPHistoryInstanceXMLContains XML content of the TSP service history instance used.
TSLTSPInformationExtensionsContains XML content of information extensions of the TSP used.
TSLTSPInformationExtensions[Idx]Contains XML content of information extension of the specified index of the TSP used.
TSLTSPInformationURIContains XML content of information URI of the TSP used.
TSLTSPInformationURI[lang]Contains information URI for the specified language of the TSP used.
TSLTSPNameContains XML content of name of the TSP used.
TSLTSPName[lang]Contains name for the specified language of the TSP used.
TSLTSPSchemeServiceDefinitionURIContains XML content of scheme service definition URI of the TSP service used.
TSLTSPSchemeServiceDefinitionURI[lang]Contains scheme service definition URI for the specified language of the TSP service used.
TSLTSPServiceDefinitionURIContains XML content of definition URI of the TSP service used.
TSLTSPServiceDefinitionURI[lang]Contains definition URI for the specified language of the TSP service used.
TSLTSPServiceInformationExtensionsContains XML content of information extensions of the TSP service used.
TSLTSPServiceInformationExtensions[Idx]Contains XML content of information extension of the specified index of the TSP service used.
TSLTSPServiceNameContains XML content of name of the TSP service used.
TSLTSPServiceName[lang]Contains name for the specified language of the TSP service used.
TSLTSPServiceQualifiersContains list of qualifiers of the TSP service used.
TSLTSPServiceStatusContains status of the TSP service used.
TSLTSPServiceStatusStartingTimeContains status starting time of the TSP service used.
TSLTSPServiceSupplyPointsContains XML content of the supply points of the TSP service used.
TSLTSPServiceTypeIdentifierContains type identifier of the TSP service used.
TSLTSPServiceXMLContains XML content of the TSP service used.
TSLTSPTradeNameContains XML content of trade name of the TSP used.
TSLTSPTradeName[lang]Contains trade name for the specified language of the TSP used.
TSLTSPXMLContains XML content of the TSP used.
TSLTypeContains TSL type of the TSL used.
TSLVersionIdentifierContains version identifier of the TSL used.
TSLXMLContains XML content of the TSL used.
UseArchivalTimestampV3Whether to apply archival timestamp V3.
UseDefaultTSLsEnables or disables the use of the default TSLs.
UseMicrosoftCTLEnables or disables automatic use of Microsoft online certificate trust list.
UseSystemCertificatesEnables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
TagAllows to store any custom data.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AllSignaturesValid Property (CAdESVerifier Class)

The cumulative validity of all signatures.

Syntax


public boolean isAllSignaturesValid();


Default Value

False

Remarks

Use this property to check if all the signatures found in the message or document are valid.

This property is read-only and not available at design time.

BlockedCertificates Property (CAdESVerifier Class)

The certificates that must be rejected as trust anchors.

Syntax


public CertificateList getBlockedCertificates();


public void setBlockedCertificates(CertificateList blockedCertificates);

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

This property is not available at design time.

Certificates Property (CAdESVerifier Class)

A collection of certificates included in the electronic signature.

Syntax


public CertificateList getCertificates();


Remarks

Use this property to access all certificates included into the signature(s) by its creator.

This property is read-only and not available at design time.

ChainValidationDetails Property (CAdESVerifier Class)

The details of a certificate chain validation outcome.

Syntax


public int getChainValidationDetails();


Default Value

0

Remarks

Use the value(s) returned by this property to identify the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only and not available at design time.

ChainValidationResult Property (CAdESVerifier Class)

The general outcome of a certificate chain validation routine. Use ChainValidationDetails to get information about the reasons that contributed to the validation result.

Syntax


public int getChainValidationResult();


Enumerated values:
  public final static int cvtValid = 0;

  public final static int cvtValidButUntrusted = 1;

  public final static int cvtInvalid = 2;

  public final static int cvtCantBeEstablished = 3;

Default Value

0

Remarks

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only and not available at design time.

ClaimedSigningTime Property (CAdESVerifier Class)

Returns a signature's claimed signing time.

Syntax


public String getClaimedSigningTime();


Default Value

""

Remarks

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by the signature and may be forfeited or wrong. Use ValidatedSigningTime to obtain the signing time figure verified by a trusted timestamping authority. The time is in UTC.

This property is read-only and not available at design time.

CompatibilityErrors Property (CAdESVerifier Class)

Returns compatibility errors encountered during validation.

Syntax


public int getCompatibilityErrors();


Default Value

0

Remarks

Use this property to get specific compatibility errors encountered within the course of certificate chain validation. Unlike chain validation details, compatibility errors indicate violation by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.

Supported values:

cerrUnknown0x00001Unknown validation error

cerrNoMessageDigest0x00002No message digest attribute included in the signature

cerrNoContentType0x00004No mandatory content-type attribute is included in the signature

cerrNoSigningCertificate0x00008No mandatory signing-certificate (-v2) attribute is included in the signature

cerrNoSignaturePolicy0x00010No signature policy information is included in the signature

cerrNoSignatureTimestamp0x00020The signature is not timestamped

cerrNoCertificateReferences0x00040No certificate-references attribute was found in the signature

cerrNoRevocationReferences0x00080No revocation-references attribute was found in the signature

cerrNoCertificateValues0x00100No certificate-values attribute was found in the signature

cerrNoRevocationValues0x00200No revocation-values attribute was found in the signature

cerrNoTimestampedValidationData0x00400No timestamped validation data was found in the signature

cerrNoArchivalTimestamp0x00800No archival timestamp was found in the signature

cerrUnexpectedValidationElements0x01000Unexpected validation elements were found in the signature

cerrMissingValidationElements0x02000Some mandatory validation elements are missing from the signature

cerrInvalidATSHashIndex0x04000ATS Hash Index attribute is invalid

cerrNoSigningTime0x08000No mandatory signing-time attribute was found in the signature

cerrMisplacedSigPolicyStore0x10000Signature policy store attribute is misplaced

This property is read-only and not available at design time.

ContentType Property (CAdESVerifier Class)

Returns the signed message's content type.

Syntax


public String getContentType();


Default Value

""

Remarks

Use this property to check the content type attribute of the message record in it by the signer.

This property is read-only and not available at design time.

Countersigned Property (CAdESVerifier Class)

Indicates if the signature is countersigned.

Syntax


public boolean isCountersigned();


Default Value

False

Remarks

Use this property to find out whether the signed message contains any countersignatures over the main signature(s).

You can track countersignatures during the validating by subscribing to CountersignatureValidated event.

This property is read-only and not available at design time.

CountersigningCertificate Property (CAdESVerifier Class)

The certificate that was used to countersign the signature.

Syntax


public Certificate getCountersigningCertificate();


Remarks

Use this property to access the certificate that was used to countersign a signature. You can check this property from your CountersignatureValidated event handler, or after Verify method completes.

This property is read-only and not available at design time.

CRLs Property (CAdESVerifier Class)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax


public CRLList getCRLs();


Remarks

Use this property to access the CRLs embedded into the signature by the signer.

This property is read-only and not available at design time.

CurrentCACertificate Property (CAdESVerifier Class)

The CA of the currently processed certificate.

Syntax


public Certificate getCurrentCACertificate();


Remarks

The validator component uses this property to publish the issuer certificate of the certificate that is currently being processed, if it is available.

This property is read-only and not available at design time.

CurrentCertificate Property (CAdESVerifier Class)

The certificate that is currently being processed.

Syntax


public Certificate getCurrentCertificate();


Remarks

This property returns the certificate that is currently being processed by the validator.

This property is read-only and not available at design time.

DataBytes Property (CAdESVerifier Class)

Use this property to pass the signed data to class in the byte array form.

Syntax


public byte[] getDataBytes();


public void setDataBytes(byte[] dataBytes);

Remarks

Assign a byte array containing the original signed data to this property.

This property is not available at design time.

DataFile Property (CAdESVerifier Class)

A path to the file containing the originally signed data.

Syntax


public String getDataFile();


public void setDataFile(String dataFile);

Default Value

""

Remarks

Use this property when working with detached signatures to provide the original signed input. Alternatively, use DataStream to provide in-memory data.

DataStream Property (CAdESVerifier Class)

A stream containing the originally signed data.

Syntax


public java.io.InputStream getDataStream();


public void setDataStream(java.io.InputStream dataStream);

Default Value

null

Remarks

Use this property when working with detached signatures to provide the original signed input. Alternatively, use DataFile to provide the data in a file.

This property is not available at design time.

FIPSMode Property (CAdESVerifier Class)

Reserved.

Syntax


public boolean isFIPSMode();


public void setFIPSMode(boolean FIPSMode);

Default Value

False

Remarks

This property is reserved for future use.

HashAlgorithm Property (CAdESVerifier Class)

Returns the hash algorithm that was used to calculate the signature.

Syntax


public String getHashAlgorithm();


Default Value

""

Remarks

Check this property after calling Verify or VerifyDetached to get the hash algorithm that was used to calculate MessageDigest.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

This property is read-only and not available at design time.

IgnoreChainValidationErrors Property (CAdESVerifier Class)

Makes the class tolerant to chain validation errors.

Syntax


public boolean isIgnoreChainValidationErrors();


public void setIgnoreChainValidationErrors(boolean ignoreChainValidationErrors);

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (CAdESVerifier Class)

Use this property to pass the input to class in the byte array form.

Syntax


public byte[] getInputBytes();


public void setInputBytes(byte[] inputBytes);

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

InputFile Property (CAdESVerifier Class)

A path to the file containing the signature blob.

Syntax


public String getInputFile();


public void setInputFile(String inputFile);

Default Value

""

Remarks

Use this property to provide a path to the file containing the CAdES signature blob. If verifying detached signatures, use DataStream or DataFile to also supply the original data that was signed.

InputStream Property (CAdESVerifier Class)

A stream containing the signature blob.

Syntax


public java.io.InputStream getInputStream();


public void setInputStream(java.io.InputStream inputStream);

Default Value

null

Remarks

Use this property to provide the signature blob to the component. If verifying detached signatures, remember to also supply the data that was signed via DataStream or DataFile properties.

This property is not available at design time.

InterimValidationDetails Property (CAdESVerifier Class)

Contains the validation details of the moment.

Syntax


public int getInterimValidationDetails();


public void setInterimValidationDetails(int interimValidationDetails);

Default Value

0

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity details mid-flight.

The value of this property is a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is not available at design time.

InterimValidationResult Property (CAdESVerifier Class)

Contains the validation status of the moment.

Syntax


public int getInterimValidationResult();


public void setInterimValidationResult(int interimValidationResult);

Enumerated values:
  public final static int cvtValid = 0;

  public final static int cvtValidButUntrusted = 1;

  public final static int cvtInvalid = 2;

  public final static int cvtCantBeEstablished = 3;

Default Value

0

Remarks

Over the course of the validation process, the validator maintains an interim validity status for the chain that is being processed. This status is influenced by every single step of the validation routine, and may change along the way, before the end of the chain is reached and the final validation conclusion is drawn.

Use this property to check the interim validity status mid-flight.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

This property is not available at design time.

KnownCertificates Property (CAdESVerifier Class)

Additional certificates for chain validation.

Syntax


public CertificateList getKnownCertificates();


public void setKnownCertificates(CertificateList knownCertificates);

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of certificates to be added to this collection is roughly equivalent to that of Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

This property is not available at design time.

KnownCRLs Property (CAdESVerifier Class)

Additional CRLs for chain validation.

Syntax


public CRLList getKnownCRLs();


public void setKnownCRLs(CRLList knownCRLs);

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

This property is not available at design time.

KnownOCSPs Property (CAdESVerifier Class)

Additional OCSP responses for chain validation.

Syntax


public OCSPResponseList getKnownOCSPs();


public void setKnownOCSPs(OCSPResponseList knownOCSPs);

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

This property is not available at design time.

LastArchivalTime Property (CAdESVerifier Class)

Indicates the most recent archival time of an archived signature.

Syntax


public String getLastArchivalTime();


Default Value

""

Remarks

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (CAdES-A) signatures.

This property is read-only and not available at design time.

Level Property (CAdESVerifier Class)

Returns the CAdES signature level.

Syntax


public int getLevel();


Enumerated values:
  public final static int cslUnknown = 0;

  public final static int cslBES = 1;

  public final static int cslEPES = 2;

  public final static int cslT = 3;

  public final static int cslC = 4;

  public final static int cslXType1 = 5;

  public final static int cslXType2 = 6;

  public final static int cslXLType1 = 7;

  public final static int cslXLType2 = 8;

  public final static int cslBaselineB = 9;

  public final static int cslBaselineT = 10;

  public final static int cslBaselineLT = 11;

  public final static int cslBaselineLTA = 12;

  public final static int cslExtendedBES = 13;

  public final static int cslExtendedEPES = 14;

  public final static int cslExtendedT = 15;

  public final static int cslExtendedC = 16;

  public final static int cslExtendedXType1 = 17;

  public final static int cslExtendedXType2 = 18;

  public final static int cslExtendedXLType1 = 19;

  public final static int cslExtendedXLType2 = 20;

  public final static int cslExtendedA = 21;

  public final static int cslA = 22;

Default Value

0

Remarks

CMS Advanced Electronic Signatures (CAdES) standard defines a number of different 'levels' of signatures which can be used for different purposes. The supported values are:

cslUnknown0Unknown signature level

cslBES1BES (Basic Electronic Signature)

cslEPES2EPES (Electronic Signature with an Explicit Policy)

cslT3T (Timestamped)

cslC4C (T with revocation references)

cslXType15X Type 1 (C with an ES-C timestamp)

cslXType26X Type 2 (C with a CertsAndCRLs timestamp)

cslXLType17XL Type 1 (C with revocation values and an ES-C timestamp)

cslXLType28XL Type 2 (C with revocation values and a CertsAndCRLs timestamp)

cslBaselineB9Baseline B (B-B, basic)

cslBaselineT10Baseline T (B-T, timestamped)

cslBaselineLT11Baseline LT (B-LT, long-term)

cslBaselineLTA12Baseline LTA (B-LTA, long-term with archived timestamp)

cslExtendedBES13Extended BES

cslExtendedEPES14Extended EPES

cslExtendedT15Extended T

cslExtendedC16Extended C

cslExtendedXType117Extended X Type 1

cslExtendedXType218Extended X Type 2

cslExtendedXLType119Extended XL Type 1

cslExtendedXLType220Extended XL Type 2

cslExtendedA21Extended A

cslA22A (archived)

This property is read-only and not available at design time.

MessageDigest Property (CAdESVerifier Class)

The binary of the signature's message digest.

Syntax


public String getMessageDigest();


Default Value

""

Remarks

Use this property to access the 'main' message digest of the CMS blob (the digest included as a message-digest signed attribute).

This property is read-only and not available at design time.

OCSPs Property (CAdESVerifier Class)

A collection of OCSP responses embedded into the signature.

Syntax


public OCSPResponseList getOCSPs();


Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

This property is read-only and not available at design time.

OfflineMode Property (CAdESVerifier Class)

Switches the class to the offline mode.

Syntax


public boolean isOfflineMode();


public void setOfflineMode(boolean offlineMode);

Default Value

False

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (CAdESVerifier Class)

Use this property to read the output the class object has produced.

Syntax


public byte[] getOutputBytes();


Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

OutputFile Property (CAdESVerifier Class)

A path to the file to write the extracted data to.

Syntax


public String getOutputFile();


public void setOutputFile(String outputFile);

Default Value

""

Remarks

Use this property to provide a file name to save the data extracted from the enveloping signature.

OutputStream Property (CAdESVerifier Class)

A stream where the verified and extracted data should be saved.

Syntax


public java.io.OutputStream getOutputStream();


public void setOutputStream(java.io.OutputStream outputStream);

Default Value

null

Remarks

Use this property to specify a stream to write the data extracted from the enveloping signature to.

This property is not available at design time.

PolicyHash Property (CAdESVerifier Class)

The signature policy hash value.

Syntax


public String getPolicyHash();


Default Value

""

Remarks

Use this property to get the signature policy hash from EPES signatures

This property is read-only and not available at design time.

PolicyID Property (CAdESVerifier Class)

The policy ID that was included into the signature.

Syntax


public String getPolicyID();


Default Value

""

Remarks

Use this property to retrieve the signature policy identifier from EPES signatures.

This property is read-only and not available at design time.

PolicyURI Property (CAdESVerifier Class)

The signature policy URI that was included in the signature.

Syntax


public String getPolicyURI();


Default Value

""

Remarks

Use this property to retrieve the URI of the signature policy from EPES signatures.

This property is read-only and not available at design time.

Profile Property (CAdESVerifier Class)

Specifies a pre-defined profile to apply when creating the signature.

Syntax


public String getProfile();


public void setProfile(String profile);

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (CAdESVerifier Class)

The proxy server settings.

Syntax


public ProxySettings getProxy();


Remarks

Use this property to tune up the proxy server settings.

This property is read-only.

PublicKeyAlgorithm Property (CAdESVerifier Class)

Returns the public key algorithm that was used to create the signature.

Syntax


public String getPublicKeyAlgorithm();


Default Value

""

Remarks

This property specifies the public key algorithm that was used to create the signature. This typically matches the algorithm of the signing certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

This property is read-only and not available at design time.

Qualified Property (CAdESVerifier Class)

Indicates a qualified electronic signature.

Syntax


public int getQualified();


Enumerated values:
  public final static int sqsUnknown = 0;

  public final static int sqsNone = 1;

  public final static int sqsGranted = 2;

  public final static int sqsWithdrawn = 3;

  public final static int sqsSetByNationalLaw = 4;

  public final static int sqsDeprecatedByNationalLaw = 5;

  public final static int sqsRecognizedAtNationalLevel = 6;

  public final static int sqsDeprecatedAtNationalLevel = 7;

  public final static int sqsUnderSupervision = 8;

  public final static int sqsSupervisionInCessation = 9;

  public final static int sqsSupervisionCeased = 10;

  public final static int sqsSupervisionRevoked = 11;

  public final static int sqsAccredited = 12;

  public final static int sqsAccreditationCeased = 13;

  public final static int sqsAccreditationRevoked = 14;

  public final static int sqsInAccordance = 15;

  public final static int sqsExpired = 16;

  public final static int sqsSuspended = 17;

  public final static int sqsRevoked = 18;

  public final static int sqsNotInAccordance = 19;

Default Value

0

Remarks

Use this property to check if an electronic signature is created using a qualified device for creating electronic signatures and that relies on a qualified electronic signature certificate.

Adjust UseDefaultTSLs property and/or CustomTSLs property before validating the signature/certificate to properly obtain TSP (Trust Service Provider) service status. Use Qualified* and TSL* config properties to obtain extended information.

The following qualified statuses are supported:

sqsUnknown0Qualified status unknown. Use config's QualifiedInfo setting to obtain service status URI.

sqsNone1None

sqsGranted2Granted

sqsWithdrawn3Withdrawn

sqsSetByNationalLaw4Set by national law

sqsDeprecatedByNationalLaw5Deprecated by national law

sqsRecognizedAtNationalLevel6Recognized at national level

sqsDeprecatedAtNationalLevel7Deprecated at national level

sqsUnderSupervision8Under supervision

sqsSupervisionInCessation9Supervision in cessation

sqsSupervisionCeased10Supervision ceased

sqsSupervisionRevoked11Supervision revoked

sqsAccredited12Accredited

sqsAccreditationCeased13Accreditation ceased

sqsAccreditationRevoked14Accreditation revoked

sqsInAccordance15Deprecated. The subject service is in accordance with the scheme's specific status determination criteria (only for use in positive approval schemes).

sqsExpired16Deprecated. The subject service is no longer overseen by the scheme, e.g. due to nonrenewal or withdrawal by the TSP, or cessation of the service or the scheme's operations.

sqsSuspended17Deprecated. The subject service's status is temporarily uncertain whilst checks are made by the scheme operator (typically e.g. while a revocation request is being investigated or if action is required to resolve a deficiency in the service fulfilling the scheme's criteria.

sqsRevoked18Deprecated. The subject service's approved status has been revoked because it is no longer in accordance with the scheme's specific status determination criteria (only for use in positive approval schemes).

sqsNotInAccordance19Deprecated. The subject service is not in accordance with the scheme's specific status determination criteria (only for use in negative approval schemes).

This property is read-only and not available at design time.

RevocationCheck Property (CAdESVerifier Class)

Specifies the kind(s) of revocation check to perform.

Syntax


public int getRevocationCheck();


public void setRevocationCheck(int revocationCheck);

Enumerated values:
  public final static int crcNone = 0;

  public final static int crcAuto = 1;

  public final static int crcAllCRL = 2;

  public final static int crcAllOCSP = 3;

  public final static int crcAllCRLAndOCSP = 4;

  public final static int crcAnyCRL = 5;

  public final static int crcAnyOCSP = 6;

  public final static int crcAnyCRLOrOCSP = 7;

  public final static int crcAnyOCSPOrCRL = 8;

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRL) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

crcNone (0)No revocation checking
crcAuto (1)Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (2)Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (3)Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (4)Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (5)At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (6)At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (7)At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (8)At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

SignatureValidationResult Property (CAdESVerifier Class)

The signature validation result.

Syntax


public int getSignatureValidationResult();


Enumerated values:
  public final static int svtValid = 0;

  public final static int svtUnknown = 1;

  public final static int svtCorrupted = 2;

  public final static int svtSignerNotFound = 3;

  public final static int svtFailure = 4;

Default Value

0

Remarks

Use this property to check the result of the most recent signature validation.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

This property is read-only and not available at design time.

SignedAttributes Property (CAdESVerifier Class)

Custom signature attributes that are covered by the electronic signature.

Syntax


public SignatureAttributeList getSignedAttributes();


Remarks

Signature attributes are used to store auxiliary information in the signature. Values included as signed attributes are covered by the signature.

This property is read-only and not available at design time.

SigningCertificate Property (CAdESVerifier Class)

The certificate that was used to create the signature.

Syntax


public Certificate getSigningCertificate();


Remarks

Use this property to access the certificate that was used to create the signature. This property might not be available if the signer chose not to include the certificate into the signature.

This property is read-only and not available at design time.

SocketSettings Property (CAdESVerifier Class)

Manages network connection settings.

Syntax


public SocketSettings getSocketSettings();


Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Timestamp Property (CAdESVerifier Class)

Contains the timestamp which is being validated.

Syntax


public TimestampInfo getTimestamp();


Remarks

Use this property to access the timestamp which is currently being validated.

This property is read-only and not available at design time.

Timestamped Property (CAdESVerifier Class)

Indicates whether or not the signature is timestamped.

Syntax


public boolean isTimestamped();


Default Value

False

Remarks

This property returns True if the signature is timestamped, and False otherwise.

This property is read-only and not available at design time.

TLSClientChain Property (CAdESVerifier Class)

The TLS client certificate chain.

Syntax


public CertificateList getTLSClientChain();


public void setTLSClientChain(CertificateList TLSClientChain);

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.

This property is not available at design time.

TLSServerChain Property (CAdESVerifier Class)

The TLS server's certificate chain.

Syntax


public CertificateList getTLSServerChain();


Remarks

Use this property to access the certificate chain sent by the TLS server.

This property is read-only and not available at design time.

TLSSettings Property (CAdESVerifier Class)

Manages TLS layer settings.

Syntax


public TLSSettings getTLSSettings();


Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

TrustedCertificates Property (CAdESVerifier Class)

A list of trusted certificates for chain validation.

Syntax


public CertificateList getTrustedCertificates();


public void setTrustedCertificates(CertificateList trustedCertificates);

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same than that of Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

This property is not available at design time.

TSACertificate Property (CAdESVerifier Class)

The certificate of the Time Stamping Authority.

Syntax


public Certificate getTSACertificate();


Remarks

Use this property to access the certificate of the TSA that produced the timestamp.

Note that in some instances the TSA certificate might be unavailable, even for timestamped documents and signatures.

This property is read-only and not available at design time.

UnsignedAttributes Property (CAdESVerifier Class)

Custom unsigned attributes included in the electronic signature.

Syntax


public SignatureAttributeList getUnsignedAttributes();


Remarks

Signature attributes are used to store auxiliary information in the signature. Values included as unsigned attributes are not covered by the signature and can be changed or removed without affecting the signature.

This property is read-only and not available at design time.

ValidatedSigningTime Property (CAdESVerifier Class)

Contains the certified signing time.

Syntax


public String getValidatedSigningTime();


Default Value

""

Remarks

Use this property to obtain the signing time as certified by an external timestamp. The time is in UTC.

This property is read-only and not available at design time.

ValidationLog Property (CAdESVerifier Class)

Contains the complete log of the certificate validation routine.

Syntax


public String getValidationLog();


Default Value

""

Remarks

Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

This property is read-only and not available at design time.

ValidationMoment Property (CAdESVerifier Class)

The time point at which signature validity is to be established.

Syntax


public String getValidationMoment();


public void setValidationMoment(String validationMoment);

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either signature creation time, or current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Config Method (Cadesverifier Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (Cadesverifier Class)

Performs an additional action.

Syntax

public String doAction(String actionID, String actionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier of the action is provided in ActionID parameter. ActionParams contains a list of parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Verify Method (Cadesverifier Class)

Verifies a digitally signed CAdES message.

Syntax

public void verify();

Remarks

CAdESVerifier supports two types of signatures: enveloping and detached. In the enveloping case, both the data and the signature travel in the same 'combined' message. The detached variant observes the signature and the data (in its original form) residing in different files.

Call this method to verify enveloping signatures provided via InputStream or InputFile property, and extract the embedded data to OutputFile or OutputStream. Use VerifyDetached to verify detached signatures.

VerifyDetached Method (Cadesverifier Class)

Verifies a detached CAdES signature.

Syntax

public void verifyDetached();

Remarks

Use this method to verify detached signatures. Pass the signature via InputStream or InputFile property, and the data via DataStream or DataFile property.

Use Verify to verify enveloping (non-detached) signatures.

ChainElementDownload Event (Cadesverifier Class)

TBD.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void chainElementDownload(CadesverifierChainElementDownloadEvent e) {}
  ...
}

public class CadesverifierChainElementDownloadEvent {
  public String cert;

  public String CACert;

  public String location;

}

Remarks

TBD.

ChainElementNeeded Event (Cadesverifier Class)

TBD.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void chainElementNeeded(CadesverifierChainElementNeededEvent e) {}
  ...
}

public class CadesverifierChainElementNeededEvent {
  public String cert;

  public String CACert;

}

Remarks

TBD.

ChainValidated Event (Cadesverifier Class)

Reports the completion of a certificate chain validation.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void chainValidated(CadesverifierChainValidatedEvent e) {}
  ...
}

public class CadesverifierChainValidatedEvent {
  public String subjectRDN;

  public int validationResult;

  public int validationDetails;

}

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

CountersignatureFound Event (Cadesverifier Class)

Signifies the start of countersignature validation.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void countersignatureFound(CadesverifierCountersignatureFoundEvent e) {}
  ...
}

public class CadesverifierCountersignatureFoundEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public boolean certFound;

  public boolean validateSignature;

  public boolean validateChain;

}

Remarks

This event tells the application that countersignature validation is about to start, and provides the details about the countersigner's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every countersignature located in the verified document or message.

The CertFound is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.

Signature and countersignature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

CountersignatureValidated Event (Cadesverifier Class)

Reports the completion of countersignature validation.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void countersignatureValidated(CadesverifierCountersignatureValidatedEvent e) {}
  ...
}

public class CadesverifierCountersignatureValidatedEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public int validationResult;

}

Remarks

This event marks the completion of a countersignature validation process.

Use IssuerRDN, SerialNumber, and/or SubjectKeyID to identify the signing certificate.

When validation is successful, ValidationResult returns 0. Any other value reports a failure.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Error Event (Cadesverifier Class)

Information about errors during CAdES verification.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void error(CadesverifierErrorEvent e) {}
  ...
}

public class CadesverifierErrorEvent {
  public int errorCode;

  public String description;

}

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Messages section.

Notification Event (Cadesverifier Class)

This event notifies the application about an underlying control flow event.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void notification(CadesverifierNotificationEvent e) {}
  ...
}

public class CadesverifierNotificationEvent {
  public String eventID;

  public String eventParam;

}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

SignatureFound Event (Cadesverifier Class)

Signifies the start of signature validation.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void signatureFound(CadesverifierSignatureFoundEvent e) {}
  ...
}

public class CadesverifierSignatureFoundEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public boolean certFound;

  public boolean validateSignature;

  public boolean validateChain;

}

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (Cadesverifier Class)

Marks the completion of the signature validation routine.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void signatureValidated(CadesverifierSignatureValidatedEvent e) {}
  ...
}

public class CadesverifierSignatureValidatedEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public int validationResult;

}

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

TimestampFound Event (Cadesverifier Class)

Signifies the start of a timestamp validation routine.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void timestampFound(CadesverifierTimestampFoundEvent e) {}
  ...
}

public class CadesverifierTimestampFoundEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public boolean certFound;

  public boolean validateTimestamp;

  public boolean validateChain;

}

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampValidated Event (Cadesverifier Class)

Reports the completion of the timestamp validation routine.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void timestampValidated(CadesverifierTimestampValidatedEvent e) {}
  ...
}

public class CadesverifierTimestampValidatedEvent {
  public String issuerRDN;

  public byte[] serialNumber;

  public byte[] subjectKeyID;

  public String time;

  public int validationResult;

  public int chainValidationResult;

  public int chainValidationDetails;

}

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

TLSCertValidate Event (Cadesverifier Class)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void TLSCertValidate(CadesverifierTLSCertValidateEvent e) {}
  ...
}

public class CadesverifierTLSCertValidateEvent {
  public String serverHostname;

  public String serverIP;

  public boolean accept;

}

Remarks

This event is fired during a TLS handshake. Use TLSServerChain property to access the certificate chain. In general case, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

ValidationProgress Event (Cadesverifier Class)

TBD.

Syntax

public class DefaultCadesverifierEventListener implements CadesverifierEventListener {
  ...
  public void validationProgress(CadesverifierValidationProgressEvent e) {}
  ...
}

public class CadesverifierValidationProgressEvent {
  public String validationEventType;

  public String cert;

  public String CACert;

  public boolean doContinue;

}

Remarks

TBD.

Certificate Type

Provides details of an individual X.509 certificate.

Remarks

This type provides access to X.509 certificate details.

Fields

Bytes
byte[]

Returns raw certificate data in DER format.

CA
boolean

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

CAKeyID
byte[]

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

CRLDistributionPoints
String

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Curve
String

Specifies the elliptic curve of the EC public key.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

Fingerprint
byte[]

Contains the fingerprint (a hash imprint) of this certificate.

FriendlyName
String

Contains an associated alias (friendly name) of the certificate.

HashAlgorithm
String

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Issuer
String

The common name of the certificate issuer (CA), typically a company name.

IssuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

KeyAlgorithm
String

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

KeyBits
int

Returns the length of the public key.

KeyFingerprint
byte[]

Returns a fingerprint of the public key contained in the certificate.

KeyUsage
int

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

KeyValid
boolean

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
String

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

OCSPNoCheck
boolean

TBD.

Origin
int

Returns the origin of this certificate.

PolicyIDs
String

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

PrivateKeyBytes
byte[]

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

PrivateKeyExists
boolean

Indicates whether the certificate has an associated private key.

PrivateKeyExtractable
boolean

Indicates whether the private key is extractable

PublicKeyBytes
byte[]

Contains the certificate's public key in DER format.

QualifiedStatements
int

TBD

SelfSigned
boolean

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
byte[]

Returns the certificate's serial number.

SigAlgorithm
String

Indicates the algorithm that was used by the CA to sign this certificate.

Subject
String

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

SubjectAlternativeName
String

TBD.

SubjectKeyID
byte[]

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

SubjectRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

ValidFrom
String

The time point at which the certificate becomes valid, in UTC.

ValidTo
String

The time point at which the certificate expires, in UTC.

Constructors

public Certificate(byte[] bytes, int startIndex, int count, String password);

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.

public Certificate(byte[] certBytes, int certStartIndex, int certCount, byte[] keyBytes, int keyStartIndex, int keyCount, String password);

Loads the X.509 certificate from a memory buffer. CertBytes is a buffer containing the raw certificate data. CertStartIndex and CertCount specify the number of bytes to be read from the buffer, respectively. KeyBytes is a buffer containing the private key data. KeyStartIndex and KeyCount specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.

public Certificate(byte[] bytes, int startIndex, int count);

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively.

public Certificate(String path, String password);

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data. Password is a password encrypting the certificate.

public Certificate(String certPath, String keyPath, String password);

Loads the X.509 certificate from a file. CertPath specifies the full path to the file containing the certificate data. KeyPath specifies the full path to the file containing the private key. Password is a password encrypting the certificate.

public Certificate(String path);

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data.

public Certificate(java.io.InputStream stream);

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public Certificate(java.io.InputStream stream, String password);

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data. Password is a password encrypting the certificate.

public Certificate(java.io.InputStream certStream, java.io.InputStream keyStream, String password);

Loads the X.509 certificate from a stream. CertStream is a stream containing the certificate data. KeyStream is a stream containing the private key. Password is a password encrypting the certificate.

public Certificate();

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields

Bytes
byte[]

Returns raw CRL data in DER format.

CAKeyID
byte[]

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

EntryCount
int

Returns the number of certificate status entries in the CRL.

Issuer
String

The common name of the CRL issuer (CA), typically a company name.

IssuerRDN
String

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Location
String

The URL that the CRL was downloaded from.

NextUpdate
String

The planned time and date of the next version of this CRL to be published.

SigAlgorithm
String

The public key algorithm that was used by the CA to sign this CRL.

TBS
byte[]

The to-be-signed part of the CRL (the CRL without the signature part).

ThisUpdate
String

The date and time at which this version of the CRL was published.

Constructors

public CRL(byte[] bytes, int startIndex, int count);

Creates a CRL object from a memory buffer. Bytes is a buffer containing raw (DER) CRL data, StartIndex and Count specify the starting position and the length of the CRL data in the buffer, respectively.

public CRL(String location);

Creates a CRL object by downloading it from a remote location.

public CRL(java.io.InputStream stream);

Creates a CRL object from data contained in a stream.

public CRL();

Creates an empty CRL object.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRL).

An OCSP response is a snapshot of the certificate status at a given time.

Fields

Bytes
byte[]

Buffer containing raw OCSP response data.

EntryCount
int

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

Issuer
String

Indicates the issuer of this response (a CA or its authorized representative).

IssuerRDN
String

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Location
String

Location of the OCSP responder.

ProducedAt
String

Specifies the time when the response was produced, in UTC.

Constructors

public OCSPResponse(byte[] bytes, int startIndex, int count);

Initializes the response from a memory buffer. Bytes is a buffer containing raw OCSP response data, StartIndex and Count specify the starting position and the number of bytes to be read from this buffer.

public OCSPResponse(String location);

Downloads an OCSP response from a remote location.

public OCSPResponse(java.io.InputStream stream);

Initializes the response with the data from a stream.

public OCSPResponse();

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Address
String

The IP address of the proxy server.

Authentication
int

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Password
String

The password to authenticate to the proxy server.

Port
int

The port on the proxy server to connect to.

ProxyType
int

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

RequestHeaders
String

Contains HTTP request headers for WebTunnel and HTTP proxy.

ResponseBody
String

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

ResponseHeaders
String

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

UseIPv6
boolean

Specifies whether IPv6 should be used when connecting through the proxy.

UseProxy
boolean

Enables or disables proxy-driven connection.

Username
String

Specifies the username credential for proxy authentication.

Constructors

public ProxySettings();

Creates a new ProxySettings object.

SignatureAttribute Type

Represents an attribute of a digital PKCS#7/CMS signature.

Remarks

Attributes store auxiliary information about the signed message, the signature, or the owner. Each attribute is a OID=Value pair.

Common attributes are signing time, a content type, a policy identifier, and a signature timestamp.

Fields

OID
String

The object identifier of the attribute.

Value
byte[]

The value of the attribute.

Constructors

public SignatureAttribute();

Creates a new, empty, signature attribute.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

DNSMode
int

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

DNSPort
int

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
int

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

DNSServers
String

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
int

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

IncomingSpeedLimit
int

The maximum number of bytes to read from the socket, per second.

LocalAddress
String

The local network interface to bind the socket to.

LocalPort
int

The local port number to bind the socket to.

OutgoingSpeedLimit
int

The maximum number of bytes to write to the socket, per second.

Timeout
int

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
boolean

Enables or disables IP protocol version 6.

Constructors

public SocketSettings();

Creates a new SocketSettings object.

TimestampInfo Type

A container for timestamp information.

Remarks

The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.

Fields

Accuracy
long

This field indicates the accuracy of the included time mark, in microseconds.

Bytes
byte[]

Returns raw timestamp data in DER format.

ChainValidationDetails
int

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

ChainValidationResult
int

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

HashAlgorithm
String

Returns the timestamp's hash algorithm

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

SerialNumber
byte[]

Returns the timestamp's serial number.

Time
String

The time point incorporated into the timestamp.

TimestampType
int

Returns the timestamp type.

Available options:

tstUnknown0
tstLegacy1Supported by: AuthenticodeVerifier

tstTrusted2Supported by: AuthenticodeVerifier

tstGeneric3Supported by: CAdESVerifier

tstESC4Supported by: CAdESVerifier

tstContent5Supported by: CAdESVerifier

tstCertsAndCRLs6Supported by: CAdESVerifier

tstArchive7Archive timestamp. Supported by: CAdESVerifier, OfficeVerifier, SOAPVerifier, XAdESVerifier

tstArchive28Archive v2 timestamp. Supported by: CAdESVerifier

tstArchive39Archive v3 timestamp. Supported by: CAdESVerifier

tstIndividualDataObjects10Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstAllDataObjects11Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstSignature12Signature timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstRefsOnly13RefsOnly timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

tstSigAndRefs14SigAndRefs timestamp. Supported by: OfficeVerifier, SOAPVerifier, XAdESVerifier

TSAName
String

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

ValidationLog
String

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

ValidationResult
int

Contains timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

Constructors

public TimestampInfo();

Creates a new TimestampInfo object with default field values.

TLSSettings Type

A container for TLS connection settings.

Remarks

TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

AutoValidateCertificates
boolean

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

BaseConfiguration
int

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

Ciphersuites
String

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

ECCurves
String

Defines the elliptic curves to enable.

Extensions
String

Provides access to TLS extensions.

ForceResumeIfDestinationChanges
boolean

Whether to force TLS session resumption when the destination address changes.

PreSharedIdentity
String

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedKey
String

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

PreSharedKeyCiphersuite
String

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

RenegotiationAttackPreventionMode
int

Selects renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

RevocationCheck
int

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone (0)No revocation checking
crcAuto (1)Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL (2)Check all provided CRL endpoints for all chain certificates.
crcAllOCSP (3)Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP (4)Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL (5)At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP (6)At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP (7)At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL (8)At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

SSLOptions
int

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send handshake message as large batches rather than individually

TLSMode
int

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.

UseExtendedMasterSecret
boolean

Enables Extended Master Secret Extension, as defined in RFC 7627.

UseSessionResumption
boolean

Enables or disables TLS session resumption capability.

Versions
int

Th SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

Constructors

public TLSSettings();

Creates a new TLSSettings object.

Configuration Settings (Cadesverifier Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

CAdESVerifier Configuration Settings

AddReferencesToAllUsedCertsAndRevInfo:   whether to include all certificates and revocation references into the signature.

If this property is set, all certificates and revocation references collected during validation will be added to the signature. This feature is not required by the CAdES specification, however, some processors expect such behavior.

AddReferencesToIrrevocableCerts:   Whether references to irrevocable certificates should be included into the signature.

Set this property to True to include references to irrevocable certificates into the signature.

AddReferenceToSigningCert:   Whether a reference to the signing certificate should be included into the signature.

Set this property to True to include a reference to the signing certificate into the signature.

AllowPartialValidationInfo:   Whether to allow for missing validation info.

If this property is set to True, signature validation will not fail if validation information for a certificate is absent.

CmsOptAnnexKArchiveTimestampV2Mode:   Toggles use of Annex K method of calculating validation timestamp hashes.

This CMS message option toggles the use of Annex K method of calculating validation timestamp hashes. Switch this option off to stick to RFC5126 p6.3.5 method.

CmsOptCheckATSHashIndexElements:   Enables extra checks when processing ATSHashIndex attribute.

This CMS message option enables an extra check to make sure every hash in ATSHashIndex has an associated CMS element.

CmsOptCompareRDNAsStrings:   Enforces comparison of RDN elements as text strings, rather than their byte encodings.

This CMS message option enforces comparison of string RDN elements as text strings rather than their original byte encodings.

CmsOptDigitPADSSCompatibility:   Enables Digit PADSS compatibility mode.

This CMS message option enables compatibility mode with Digit PADSS software.

CmsOptForceSigningCertificateV2Usage:   Enforces use of signing-certificate-v2 attribute.

This CMS message option enforces the use of signing-certificate-v2 attribute in favour of older signing-certificate-v1. Current regulations require that signing-certificate-v2 is used at all times.

CmsOptIgnoreDERReqInArchiveTimestamps:   Switches off DER encoding requirement for archival timestamps.

This CMS message option switches off DER encoding requirement for archival timestamps (normally meaning no attribute reordering). This setting is a workaround for certain buggy CAdES products.

CmsOptImzagerMIMCompatibility:   Enables Imzager MIM compatibility mode.

This CMS message option enables compatibility mode with Imzager MIM software.

CmsOptIncludeCertToAttributes:   Regulates whether to include the signing certificate to the signature as the signing-certificate attribute.

This CMS message option controls inclusion of the signing certificate as the signing-certificate attribute. Current regulations require that this attribute is present.

CmsOptIncludeCertToMessage:   Regulates whether to include the signing certificate and its chain to the CMS.

This CMS message option controls inclusion of the signing certificate to the CMS structure. It is recommended that the certificate is included. Note that this option has no effect if the signature level used (e.g. XL) enforces inclusion of the certificate to the message.

CmsOptInsertContentType:   Regulates whether the content-type time attribute should be included in the signature structure.

This CMS message option specifies whether the content-type attribute should be included in the signature structure.

CmsOptInsertMessageDigests:   Regulates whether the message-digest signed attribute should be included in the signature structure.

This CMS message option controls inclusion of the message-digest attribute in the signature structure. Current regulations require that this attribute is present at all times.

CmsOptInsertSigningTime:   Regulates whether the signing-time attribute should be included in the signature structure.

This CMS message option specifies whether the signing-time attribute should be included in the signature structure. Switch it off to suppress inclusion of the signing-time attribute.

CmsOptSkipEnvContentInfoOnSigArchival:   Excludes hashing of enveloped content when calculating an archival timestamp.

This CMS message option excludes hashing of enveloped content when calculating an archival timestamp. This setting is a workaround for certain buggy CAdES products.

CmsOptUseATSHashIndexV1:   Enables use of ATSHashIndexV1 attribute.

This CMS message option enables use of deprecated ATSHashIndexV1 attribute when calculating archival timestamp V3 hashes.

CmsOptUseGeneralizedTimeFormat:   Enables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type.

This CMS message option controls whether the signing-time attribute should be encoded as GENERALIZEDTIME or UTCTIME. Current regulations require that the GENERALIZEDTIME type is used at all times.

CmsOptUseGenericSigAlgorithmOIDs:   Enables use of generic signature algorithm OIDs in the signature.

This CMS message option enforces the use of generic public key algorithm OIDs (e.g. rsaEncryption) instead of hash algorithm-specific variants (e.g. sha256withRsaEncryption). This setting is a workaround for certain buggy CAdES products.

CmsOptUsePlainContentForTimestampHashes:   Makes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes.

This CMS message option causes CAdESSigner to ignore ASN.1 formatting when feeding content to timestamp hashes (might make a difference with split OCTETSTRINGs for extra long contents). This option is only applicable to content timestamps and ArchivalTimestampV1's. This setting is a workaround for certain buggy CAdES products.

CustomTSLs:   Specifies the custom TSLs.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

DeepCountersignatureValidation:   Whether to validate countersignatures.

When this property is set, deep validation of countersignatures is performed.

DeepTimestampValidation:   Whether to perform deep validation of all timestamps.

When this property is set, deep validation of all signature's timestamps is performed.

ForceCompleteChainValidation:   Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates when the signing certificate is invalid.

ForceCompleteChainValidationForTrusted:   Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod:   Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

IgnoreChainValidationErrors:   Makes the component ignore chain validation issues.

Set this property to True to make the component ignore chain validation errors. Use with extra care.

IgnoreOCSPNoCheckExtension:   Whether OCSP NoCheck extension should be ignored.

Set this property to false to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates:   Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows to emulate the verifying environment without actually changing its security settings.

PolicyExplicitText:   The explicit text of the user notice.

This property specifies the explicit text of the user notice which is displayed when the signature is verified.

PolicyUNNumbers:   The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization:   The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PromoteLongOCSPResponses:   Whether long OCSP responses are requested.

Set this property to True to force the class to publish 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

PSSUsed:   Whether RSASSA-PSS mode was used.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations.

QualifiedStatus:   Indicates a qualified electronic signature.

Use this property to check if an electronic signature is created using a qualified device for creating electronic signatures and that relies on a qualified electronic signature certificate. This property return TSP service status URI.

ReportInvalidTimestamps:   Whether to rise errors on invalid timestamps.

When this property is set, each invalid timestamp will be reported by the Error event fired by the class.

SkipValidationTimestampedSignatures:   Whether to validate signatures with validation timestamps.

Set this property to False to enforce validation of the signatures containing validation timestamps.

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

TBD

TSLDistributionPoints:   Contains XML content of distribution points of the TSL used.

Use this property to get XML content of distribution points of the TSL used to obtain the qualified status of the certificate.

TSLDistributionPoints[Idx]:   Contains distribution point of the specified index of the TSL used.

Use this property to get distribution point of the specified index of the TSL used to obtain the qualified status of the certificate.

TSLHistoricalInformationPeriod:   Contains historical information period of the TSL used.

Use this property to get historical information period of the TSL used to obtain the qualified status of the certificate.

TSLLegalNotices:   Contains XML content of legal notices of the TSL used.

Use this property to get XML content of multilingual legal notices of the TSL used to obtain the qualified status of the certificate.

TSLLegalNotices[lang]:   Contains legal notices for the specified language of the TSL used.

Use this property to get legal notices for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLListIssueDateTime:   Contains list issue date and time of the TSL used.

Use this property to get list issue date and time of the TSL used to obtain the qualified status of the certificate.

TSLNextUpdate:   Contains next update date and time of the TSL used.

Use this property to get next update date and time of the TSL used to obtain the qualified status of the certificate.

TSLPolicies:   Contains XML content of policies of the TSL used.

Use this property to get XML content of multilingual policies of the TSL used to obtain the qualified status of the certificate.

TSLPolicies[lang]:   Contains policies for the specified language of the TSL used.

Use this property to get policies for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeExtensions:   Contains XML content of scheme extensions of the TSL used.

Use this property to get XML content of scheme extensions of the TSL used to obtain the qualified status of the certificate.

TSLSchemeExtensions[Idx]:   Contains XML content of scheme extension of the specified index of the TSL used.

Use this property to get XML content of scheme extension of the specified index of the TSL used to obtain the qualified status of the certificate.

TSLSchemeInformationURI:   Contains XML content of scheme information URI of the TSL used.

Use this property to get XML content of multilingual scheme information URI of the TSL used to obtain the qualified status of the certificate.

TSLSchemeInformationURI[lang]:   Contains scheme information URI for the specified language of the TSL used.

Use this property to get scheme information URI for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeName:   Contains XML content of scheme name of the TSL used.

Use this property to get XML content of multilingual scheme name of the TSL used to obtain the qualified status of the certificate.

TSLSchemeName[lang]:   Contains scheme name for the specified language of the TSL used.

Use this property to get scheme name for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorAddress:   Contains XML content of scheme operator address of the TSL used.

Use this property to get XML content of scheme operator address of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorName:   Contains XML content of scheme operator name of the TSL used.

Use this property to get XML content of multilingual scheme operator name of the TSL used to obtain the qualified status of the certificate.

TSLSchemeOperatorName[lang]:   Contains scheme operator name for the specified language of the TSL used.

Use this property to get scheme operator name for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTerritory:   Contains scheme territory of the TSL used.

Use this property to get scheme territory of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTypeCommunityRules:   Contains XML content of scheme type/community/rules of the TSL used.

Use this property to get XML content of multilingual scheme type/community/rules of the TSL used to obtain the qualified status of the certificate.

TSLSchemeTypeCommunityRules[lang]:   Contains scheme type/community/rules for the specified language of the TSL used.

Use this property to get scheme type/community/rules for the specified language code (e.g. 'en') of the TSL used to obtain the qualified status of the certificate.

TSLSequenceNumber:   Contains sequence number of the TSL used.

Use this property to get sequence number of the TSL used to obtain the qualified status of the certificate.

TSLsRetrieveLog:   Contains the complete log of the TSLs retrieve.

Use this property to access the TSLs retrieve log produced by the class. The log can be very useful when investigating issues with TSL retrieve.

TSLStatusDeterminationApproach:   Contains status determination approach of the TSL used.

Use this property to get status determination approach of the TSL used to obtain the qualified status of the certificate.

TSLsValidationLog:   Contains the complete log of the TSLs validation.

Use this property to access the TSLs validation log produced by the class. The log can be very useful when investigating issues with TSL validation.

TSLTSPAdditionalServiceInformation:   Contains addtional service information of the TSP service used.

Use this property to get the list of addtional service information of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPAddress:   Contains XML content of the address of the TSP used.

Use this property to get XML content of the address of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPHistoryInstance:   Indicates that TSP service history instance used.

Indicates whether or not the qualified status was obtained from the TSP (Trust Service Provider) service history instance.

TSLTSPHistoryInstanceAdditionalServiceInformation:   Contains addtional service information of the TSP service history instance used.

Use this property to get the list of addtional service information of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPHistoryInstanceQualifiers:   Contains list of qualifiers of the TSP service history instance used.

Use this property to get the list of qualifiers of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPHistoryInstanceServiceInformationExtensions:   Contains XML content of information extensions of the TSP service history instance used.

Use this property to get XML content of information extensions of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceInformationExtensions[Idx]:   Contains XML content of information extension of the specified index of the TSP service history instance used.

Use this property to get XML content of information extension of the specified index of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceName:   Contains XML content of name of the TSP service history instance used.

Use this property to get XML content of multilingual name of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceName[lang]:   Contains name for the specified language of the TSP service history instance used.

Use this property to get the name for the specified language code (e.g. 'en') of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceStatus:   Contains status of the TSP service history instance used.

Use this property to get the status of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceStatusStartingTime:   Contains status starting time of the TSP service history instance used.

Use this property to get the status starting time of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceServiceTypeIdentifier:   Contains type identifier of the TSP service history instance used.

Use this property to get type identifier of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPHistoryInstanceXML:   Contains XML content of the TSP service history instance used.

Use this property to get XML content of the history instance of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPInformationExtensions:   Contains XML content of information extensions of the TSP used.

Use this property to get XML content of information extensions of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationExtensions[Idx]:   Contains XML content of information extension of the specified index of the TSP used.

Use this property to get XML content of information extension of the specified index of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationURI:   Contains XML content of information URI of the TSP used.

Use this property to get XML content of multilingual information URI of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPInformationURI[lang]:   Contains information URI for the specified language of the TSP used.

Use this property to get the information URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPName:   Contains XML content of name of the TSP used.

Use this property to get XML content of multilingual name of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPName[lang]:   Contains name for the specified language of the TSP used.

Use this property to get the name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPSchemeServiceDefinitionURI:   Contains XML content of scheme service definition URI of the TSP service used.

Use this property to get XML content of multilingual scheme service definition URI of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPSchemeServiceDefinitionURI[lang]:   Contains scheme service definition URI for the specified language of the TSP service used.

Use this property to get the scheme service definition URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceDefinitionURI:   Contains XML content of definition URI of the TSP service used.

Use this property to get XML content of multilingual definition URI of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceDefinitionURI[lang]:   Contains definition URI for the specified language of the TSP service used.

Use this property to get the definition URI for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceInformationExtensions:   Contains XML content of information extensions of the TSP service used.

Use this property to get XML content of information extensions of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceInformationExtensions[Idx]:   Contains XML content of information extension of the specified index of the TSP service used.

Use this property to get XML content of information extension of the specified index of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceName:   Contains XML content of name of the TSP service used.

Use this property to get XML content of multilingual name of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceName[lang]:   Contains name for the specified language of the TSP service used.

Use this property to get the name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceQualifiers:   Contains list of qualifiers of the TSP service used.

Use this property to get the list of qualifiers of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate. The URIs list is comma-separated.

TSLTSPServiceStatus:   Contains status of the TSP service used.

Use this property to get the status of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceStatusStartingTime:   Contains status starting time of the TSP service used.

Use this property to get the status starting time of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceSupplyPoints:   Contains XML content of the supply points of the TSP service used.

Use this property to get XML content of the supply points of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceTypeIdentifier:   Contains type identifier of the TSP service used.

Use this property to get type identifier of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPServiceXML:   Contains XML content of the TSP service used.

Use this property to get XML content of the TSP (Trust Service Provider) service used to obtain the qualified status of the certificate.

TSLTSPTradeName:   Contains XML content of trade name of the TSP used.

Use this property to get XML content of multilingual trade name of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPTradeName[lang]:   Contains trade name for the specified language of the TSP used.

Use this property to get the trade name for the specified language code (e.g. 'en') of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLTSPXML:   Contains XML content of the TSP used.

Use this property to get XML content of the TSP (Trust Service Provider) used to obtain the qualified status of the certificate.

TSLType:   Contains TSL type of the TSL used.

Use this property to get TSL type of the TSL used to obtain the qualified status of the certificate.

TSLVersionIdentifier:   Contains version identifier of the TSL used.

Use this property to get version identifier of the TSL used to obtain the qualified status of the certificate.

TSLXML:   Contains XML content of the TSL used.

Use this property to get XML content of the TSL used to obtain the qualified status of the certificate.

UseArchivalTimestampV3:   Whether to apply archival timestamp V3.

Archival signature (CAdES-A) is built upon either a CAdES-X-L, or a CAdES-X-L with Time, by adding an archival timestamp. Set this property to True to use CAdES-X-L with Time Type 3.

UseDefaultTSLs:   Enables or disables the use of the default TSLs.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists). The result of this check reported in Qualified property.

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseMicrosoftCTL:   Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Configuration Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching (supported for HTTPClient, RESTClient and SOAPClient only)
globalGlobal caching

Cookies:   Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (Cadesverifier Class)

CAdESVerifier Errors

1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)

Copyright (c) 2022 /n software inc. - All rights reserved.
SecureBlackbox 2022 Java Edition - Version 22.0 [Build 8174]