SSHClient Class

Properties   Methods   Events   Config Settings   Errors  

The SSHClient class provides client-side SSH protocol functionality.

Syntax

secureblackbox.Sshclient

Remarks

Use SSHClient to establish terminal-like connections to remote systems and run commands remotely. The component supports most of third-party implementations out there, and is capable of working in "shell" and "command" modes.

Start with assigning your sign-in credentials to Username and Password properties. Where public key authentication is to be used, assign your private authentication key to Key property (remember to set Username in this case too). Subscribe to events to be notified of the session progress. AuthFailed, AuthSucceeded, and Connect are among those particularly useful.

Special attention should be paid to setting up the server key trust. Class only allows connections to servers whose public keys are recognized as trusted, much like any other SSH clients do. Assign a path to the file containing the list of trusted keys to TrustedKeysFile property. If you don't have such file, or if you would like to make trust decisions on the fly, subscribe to KnownKeyReceived and UnknownKeyReceived events. These are fired whenever a trusted or untrusted key is received from the server. For unknown/untrusted keys, you need to set the Action parameter in your UnknownKeyReceived event handler to catAcceptOnce (1) or catAcceptPermanently (2) for the connection to proceed.

Once you are all set up, you can go ahead by calling the Connect method. This launches the SSH handshake and, if everything has been set up right, establishes a connection to the server. You can now use Send and Receive methods to exchange information with the server. You can exchange data in synchronous or asynchronous way; see the description in AsyncMode topic to learn more about each mode.

When you are done with the session, call Disconnect to shut the connection down.

Hint: If you are only interested in a quick-and-dirty execution of a simple, non-interactive command, SSHClient offers a handy shortcut. ConnectAndExec method is a self-contained mechanism which sets up a connection, performs the data exchange internally, and returns the command output. Please keep in mind that you still need to set up the server trust settings as described above for this method to work.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

AsyncModeControls the SSH clients mode of work.
AuthAttemptsSpecifies the number of SSH password authentication attempts.
CommandsSpecifies the list of commands to execute.
ConnectedSpecifies whether the client is connected to the SFTP server.
ConnectionInfoContains the secure connection info.
ExitMessageContains the last commands exit message.
ExitSignalContains the last commands exit signal.
ExitStatusContains the last commands exit status.
ExternalCryptoProvides access to external signing and DC parameters.
FIPSModeReserved.
KeyContains client's SSH key.
PasswordSpecifies user's password on the server.
ProxyAllows connection through a proxy server.
ServerKeyReturns server's public key.
SocketSettingsManages network connection settings.
SSHSettingsProvides access to SSH connection settings.
SubsystemSpecifies the subsystem to request from the server.
TerminalProvides access to SSH terminal settings object.
TrustedKeysFilePath to the file containing public keys of authorized servers.
UsernameSpecifies client's username on the server.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

ConfigSets or retrieves a configuration setting.
ConnectEstablishes connection to an SSH server.
ConnectAndExecConnects to an SSH server and executes a command in one go.
DisconnectCloses connection to the SSH server.
DoActionPerforms an additional action.
PingSends a keep-alive request to the SSH server.
PollChecks whether there is any inbound data readily available.
ReceiveReads a portion of received data into a string.
ReceiveBytesReads a portion of received data into a byte array.
ReceiveBytesFromReads a portion of data received via a specific channel into a byte array.
ReceiveFromReads a portion of data received via a specific channel into a string.
SendSends a string to the server.
SendBytesSends an array of bytes to the server.
SendSpecialSends a special character to the server or remote command.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

AuthAttemptFires when a single authentication attempt is performed.
AuthFailedFires when a single authentication attempt is failed.
AuthSucceededReports a successful authentication.
BannerReports the receipt of the Hello message from the server.
CommandCompletedSignifies completion of the command execution.
CommandStartMarks the commencement of a command execution.
ConnectThis event is fired when an SSH session has been established.
DataReceivedReports receipt of another chunk of data from the server.
DataSentNotifies the application that a piece of data has been sent to the server.
DisconnectThis event is fired when the SFTP subsystem connection is closed.
ErrorInformation about errors during SFTP connection.
ExternalSignHandles remote or external signing initiated by the SignExternal method or other source.
KnownKeyReceivedSignals that the server has introduced itself with a known key.
NotificationThis event notifies the application about an underlying control flow event.
PasswordChangeRequestThis event is fired when a password change is requested.
PrivateKeyNeededThis event is fired when client's public key was accepted by the server, but the corresponding secret key is not available.
UnknownKeyReceivedSignals that the server has introduced itself with an unknown key.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

BlockSizeThe data block size.
ErrorOriginSpecifies whether the error is local or remote.
ErrorSeveritySpecifies whether the error is fatal.
LocalCharsetCharset used on the client machine.
RemoteCharsetCharset used on the server.
SendCommandEOFDefines whether EOF control character should be sent after the command data.
ThrottleControlEnables or disables throttle control for the connection.
UseStrictKeyExchangeSpecifies how strict key exchange is supported.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AsyncMode Property (SSHClient Class)

Controls the SSH clients mode of work.

Syntax


public boolean isAsyncMode();


public void setAsyncMode(boolean asyncMode);

Default Value

False

Remarks

This property defines the way in which the class communicates with the application/user code. AsyncMode set to false makes the component use synchronous single-thread approach. Synchronous mode is generally simpler to integrate and use, but please keep in mind that the calls like Connect, Receive or SendBytes may block until their execution completes. In asyncronous mode all operations return immediately, but more care should be taken about handling them in your code properly.

Here are a few highlights of each mode.

Synchronous mode:

  • All operations are performed within the caller thread context
  • Operations like Connect or SendBytes may block
  • Use Poll to check for the availability of data before reading it out with Receive or ReceiveBytes
  • Return of a call guarantees completion of the operation
  • Connection errors are reported straight from the methods via exceptions

Asynchronous mode:

  • All operations are performed in a separate thread (and so are the event calls!)
  • Methods like Send return immediately
  • Use DataSent and DataReceived events to be notified about actual data transmissions
  • Return of call only marks the beginning of the operation and does not guarantee its successful completion
  • Connection errors are reported via Error event, often followed by Disconnect.

Please note that this is a very important and sensitive property, which has a wide-scale effect on the way the SSH client works and co-operates with the application. Depending on the value assigned to this setting you may need to work with the component very differently.

When setting this property to true, please make sure that your code is prepared to handle events coming from the context of a different thread.

AuthAttempts Property (SSHClient Class)

Specifies the number of SSH password authentication attempts.

Syntax


public int getAuthAttempts();


public void setAuthAttempts(int authAttempts);

Default Value

1

Remarks

In case of password authentication failure provide new password inside the AuthFailed event handler.

Commands Property (SSHClient Class)

Specifies the list of commands to execute.

Syntax


public String getCommands();


public void setCommands(String commands);

Default Value

""

Remarks

Use this property to provide a list of commands to execute remotely. Separate different commands with EOL characters.

When this property is set, the component works in the command mode, meaning each command is executed in its own virtual terminal session. No shell connection is established.

If no commands are provided via this property, the component will establish a shell session.

Connected Property (SSHClient Class)

Specifies whether the client is connected to the SFTP server.

Syntax


public boolean isConnected();


Default Value

False

Remarks

Use this read-only property to check whether the client is connected to the server.

This property is read-only.

ConnectionInfo Property (SSHClient Class)

Contains the secure connection info.

Syntax


public SSHInfo getConnectionInfo();


Remarks

This property contains various information about the secure connection.

This property is read-only.

Please refer to the SSHInfo type for a complete list of fields.

ExitMessage Property (SSHClient Class)

Contains the last commands exit message.

Syntax


public String getExitMessage();


Default Value

""

Remarks

Use this property to access the exit message of the last command or shell session. This property normally gets assigned if the command or shell was closed due to an error.

This property is read-only and not available at design time.

ExitSignal Property (SSHClient Class)

Contains the last commands exit signal.

Syntax


public String getExitSignal();


Default Value

""

Remarks

Use this property to access the exit signal of the last command or shell session. This property normally gets assigned if the command or shell was closed due to an error.

This property is read-only and not available at design time.

ExitStatus Property (SSHClient Class)

Contains the last commands exit status.

Syntax


public int getExitStatus();


Default Value

0

Remarks

Check this property to obtain the exit status (also sometimes referred to as errorlevel) of the last command or shell session.

This property is read-only and not available at design time.

ExternalCrypto Property (SSHClient Class)

Provides access to external signing and DC parameters.

Syntax


public ExternalCrypto getExternalCrypto();


Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on OnExternalSign event) and asynchronous (based on DC protocol and DCAuth signing component).

This property is read-only.

Please refer to the ExternalCrypto type for a complete list of fields.

FIPSMode Property (SSHClient Class)

Reserved.

Syntax


public boolean isFIPSMode();


public void setFIPSMode(boolean FIPSMode);

Default Value

False

Remarks

This property is reserved for future use.

Key Property (SSHClient Class)

Contains client's SSH key.

Syntax


public SSHKey getKey();


public void setKey(SSHKey key);

Remarks

Server's public key is returned by ServerKey property.

Please refer to the SSHKey type for a complete list of fields.

Password Property (SSHClient Class)

Specifies user's password on the server.

Syntax


public String getPassword();


public void setPassword(String password);

Default Value

""

Remarks

Invalid password fires the AuthFailed event.

Proxy Property (SSHClient Class)

Allows connection through a proxy server.

Syntax


public ProxySettings getProxy();


Remarks

Set this property if the connection should be established through a proxy server.

This property is read-only.

Please refer to the ProxySettings type for a complete list of fields.

ServerKey Property (SSHClient Class)

Returns server's public key.

Syntax


public SSHKey getServerKey();


Remarks

Client's SSH key is specified by Key.

This property is read-only.

Please refer to the SSHKey type for a complete list of fields.

SocketSettings Property (SSHClient Class)

Manages network connection settings.

Syntax


public SocketSettings getSocketSettings();


Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Please refer to the SocketSettings type for a complete list of fields.

SSHSettings Property (SSHClient Class)

Provides access to SSH connection settings.

Syntax


public SSHSettings getSSHSettings();


Remarks

Use this property to configure SSH protocol settings.

This property is read-only.

Please refer to the SSHSettings type for a complete list of fields.

Subsystem Property (SSHClient Class)

Specifies the subsystem to request from the server.

Syntax


public String getSubsystem();


public void setSubsystem(String subsystem);

Default Value

""

Remarks

Subsystem is a special form of an SSH channel. It is typically used to transfer third-party protocol data, with SFTP being the most widely known.

You can tell class to set up a subsystem connection (rather than a shell or command) by assigning the subsystem name to this property.

Terminal Property (SSHClient Class)

Provides access to SSH terminal settings object.

Syntax


public SSHTerm getTerminal();


Remarks

Use this property to configure the pseudo-terminal parameters before opening a shell or command connection.

This property is read-only.

Please refer to the SSHTerm type for a complete list of fields.

TrustedKeysFile Property (SSHClient Class)

Path to the file containing public keys of authorized servers.

Syntax


public String getTrustedKeysFile();


public void setTrustedKeysFile(String trustedKeysFile);

Default Value

""

Remarks

Path to the file containing public keys of authorized servers.

Username Property (SSHClient Class)

Specifies client's username on the server.

Syntax


public String getUsername();


public void setUsername(String username);

Default Value

""

Remarks

Client's password is set by Password property. ;

Config Method (Sshclient Class)

Sets or retrieves a configuration setting.

Syntax

public String config(String configurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Connect Method (Sshclient Class)

Establishes connection to an SSH server.

Syntax

public void connect(String address, int port);

Remarks

Use this method to connect to the SSH server by providing its Address and Port.

Before connecting to the server you might want to set up your credentials using Username and Password properties. You might also need to configure the server key validation routine. You can do this by subscribing to KnownKeyReceived and UnknownKeyReceived events and implementing the event handlers as required.

Adjust AsyncMode before connecting to switch the component to either synchronous or asynchronous mode. In synchronous mode, all the calls to the component, such as Connect or SendBytes, are executed within the context of the caller thread, and block until the action completes. In asynchronous mode, the component runs the SSH session in a background thread, which makes all such calls return immediately. Find out more about the modes in the AsyncMode topic.

ConnectAndExec Method (Sshclient Class)

Connects to an SSH server and executes a command in one go.

Syntax

public byte[] connectAndExec(String address, int port, String command, boolean wantStdout, boolean wantStdErr);

Remarks

Use this method to connect to an SSH server at Address and Port and execute a command. The method returns the output of the executed command.

This method is a handy shortcut for running non-interactive commands. It encapsulates calls to Connect, Receive, Disconnect internally to save you time and space.

Please note that ConnectAndExec always runs synchronously, thus ignoring the AsyncMode setting.

Disconnect Method (Sshclient Class)

Closes connection to the SSH server.

Syntax

public void disconnect();

Remarks

Call this method to terminate the active SSH connection.

Please note that in some cases the component may still have some inbound data cached internally even after the connection is closed. You can read that data out using Receive and/or ReceiveBytes methods.

DoAction Method (Sshclient Class)

Performs an additional action.

Syntax

public String doAction(String actionID, String actionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Ping Method (Sshclient Class)

Sends a keep-alive request to the SSH server.

Syntax

public void ping();

Remarks

Use this method to send a keep-alive message to the SSH server. Keep-alive messages are empty data packets which carry no useful information but are a handy way of checking if the connection is still alive.

Poll Method (Sshclient Class)

Checks whether there is any inbound data readily available.

Syntax

public boolean poll(int milliseconds);

Remarks

Use this method to check whether there is any incoming data available in the connection. If this method returns true, you can read the data with Receive or ReceiveBytes calls.

Use the Milliseconds parameter to tell the component how long it can wait for the data to arrive.

Receive Method (Sshclient Class)

Reads a portion of received data into a string.

Syntax

public String receive();

Remarks

Use this method to read out a piece of data received from the server into a string.

Note that in synchronous mode this method may block in the absence of any inbound data until the next piece of data is received from the server. Use Poll to check if there is any data in the connection that is immediately available for reading.

In asynchronous mode a good time to call this method is upon receiving a read notification in DataReceived event handler. When working in asynchronous mode, this call returns immediately.

This method only returns data that arrives via the stdout channel. Use ReceiveFrom to read stderr data.

ReceiveBytes Method (Sshclient Class)

Reads a portion of received data into a byte array.

Syntax

public byte[] receiveBytes(int maxLen);

Remarks

Use this method to read out a piece of data received from the server into a byte array. Control the maximum length of the data chunk with the MaxLen parameter.

Note that in synchronous mode this method may block in the absence of any inbound data until the next piece of data is received from the server. Use Poll to check if there is any data in the connection that is immediately available for reading.

In asynchronous mode a good time to call this method is upon receiving a read notification in DataReceived event handler. When working in asynchronous mode, this call returns immediately.

This method only returns data that arrives via the stdout channel. Use ReceiveBytesFrom to read stderr data.

ReceiveBytesFrom Method (Sshclient Class)

Reads a portion of data received via a specific channel into a byte array.

Syntax

public byte[] receiveBytesFrom(int channel, int maxLen);

Remarks

Use this method to read out a piece of data received from the server into a byte array. Specify the channel that you are interested in reading from (0 for stdout, 1 for stderr) via the Channel parameter, and control the maximum length of the data chunk with the MaxLen parameter.

Note that in synchronous mode this method may block in the absence of any inbound data until the next piece of data is received from the server. Use Poll to check if there is any data in the connection that is immediately available for reading.

In asynchronous mode a good time to call this method is upon receiving a read notification in DataReceived event handler. When working in asynchronous mode, this call returns immediately.

Please also note that stdout and stderr channels are fully independent, which implies that data arriving via each channel should be read out separately.

ReceiveFrom Method (Sshclient Class)

Reads a portion of data received via a specific channel into a string.

Syntax

public String receiveFrom(int channel);

Remarks

Use this method to read out a piece of data received from the server into a string. Use the Channel parameter to specify the channel that you would like to read from (0 for stdout, 1 for stderr).

Note that in synchronous mode this method may block in the absence of any inbound data until the next piece of data is received from the server. Use Poll to check if there is any data in the connection that is immediately available for reading.

In asynchronous mode a good time to call this method is upon receiving a read notification in DataReceived event handler. When working in asynchronous mode, this call returns immediately.

Send Method (Sshclient Class)

Sends a string to the server.

Syntax

public void send(String dataStr, boolean addEOL);

Remarks

Use this method to send DataStr to the remote command's stdin channel. Set the AddEOL parameter to true to append the end-of-line character to the string automatically.

Note that in synchronous mode this method may block until the whole string is commited to the network connection. In asynchronous mode this method returns immediately; the application is eventually notified that the data has been sent via the DataSent event.

SendBytes Method (Sshclient Class)

Sends an array of bytes to the server.

Syntax

public void sendBytes(byte[] data);

Remarks

Use this method to send Data to the remote command's stdin channel.

Note that in synchronous mode this method may block until the whole byte array is commited to the network connection. In asynchronous mode this method returns immediately; the application is eventually notified that the data has been sent via the DataSent event.

SendSpecial Method (Sshclient Class)

Sends a special character to the server or remote command.

Syntax

public void sendSpecial(String specialChar);

Remarks

Use this method to send a special or control character to the SSH server or the command being executed. Specify the character id via the SpecialChar parameter.

Currently the only supported special character is "eof", which is sometimes used as a way to close the stdin channel gracefully.

AuthAttempt Event (Sshclient Class)

Fires when a single authentication attempt is performed.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void authAttempt(SshclientAuthAttemptEvent e) {}
  ...
}

public class SshclientAuthAttemptEvent {
  public int authType;
}

Remarks

This event is fired each time a single authentication attempt is performed. AuthType parameter specifies the type of authentication. Note, this event could be fired more than once if the client tries different authentication methods one after another.

AuthFailed Event (Sshclient Class)

Fires when a single authentication attempt is failed.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void authFailed(SshclientAuthFailedEvent e) {}
  ...
}

public class SshclientAuthFailedEvent {
  public int authenticationType;
}

Remarks

This event is fired each time a single authentication attempt fails. AuthType parameter specifies the type of authentication.

As SSH may try a number of authentication attempts of different types or with different parameters (such as public keys) during one session, this event may be fired more than once. It is not critical and may not lead to closing of the connection.

AuthSucceeded Event (Sshclient Class)

Reports a successful authentication.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void authSucceeded(SshclientAuthSucceededEvent e) {}
  ...
}

public class SshclientAuthSucceededEvent {
}

Remarks

This event may be preceded by some AuthFailed events if the client tries different authentication methods one after another.

Banner Event (Sshclient Class)

Reports the receipt of the Hello message from the server.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void banner(SshclientBannerEvent e) {}
  ...
}

public class SshclientBannerEvent {
  public byte[] text;
  public byte[] language;
}

Remarks

SFPTClient fires this event when it receives hello message from the server.

CommandCompleted Event (Sshclient Class)

Signifies completion of the command execution.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void commandCompleted(SshclientCommandCompletedEvent e) {}
  ...
}

public class SshclientCommandCompletedEvent {
  public String command;
  public int exitStatus;
  public String exitMessage;
  public String exitSignal;
}

Remarks

Subscribe to this event to be notified about completion of the remote command execution. This event fires for every command in the Commands list. The Command parameter indicates the command being completed.

ExitStatus specifies the command's return code. ExitMessage or ExitSignal parameters provide error details if the command execution was terminated forcefully,

CommandStart Event (Sshclient Class)

Marks the commencement of a command execution.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void commandStart(SshclientCommandStartEvent e) {}
  ...
}

public class SshclientCommandStartEvent {
  public String command;
}

Remarks

Subscribe to this event to be notified about the start of execution of a remote command. The Command parameter indicates the command being started.

This event is fired for all commands in the Commands list, in order. The completion of the command is reported via the CommandCompleted event.

Connect Event (Sshclient Class)

This event is fired when an SSH session has been established.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void connect(SshclientConnectEvent e) {}
  ...
}

public class SshclientConnectEvent {
}

Remarks

Use this event to track the moment when SSH session has been set up.

DataReceived Event (Sshclient Class)

Reports receipt of another chunk of data from the server.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void dataReceived(SshclientDataReceivedEvent e) {}
  ...
}

public class SshclientDataReceivedEvent {
  public int channel;
  public int bytesReceived;
  public int totalBytesPending;
}

Remarks

This event fires in asynchronous mode to report the receipt of another chunk of data from the server. Use Receive or ReceiveBytes methods to read out the received data.

The Channel parameter indicates the channel on which the data was received: stdout (0) or stderr (1). BytesReceived specify the size of the newly received chunk, and TotalBytesPending contain the total number of bytes available for reading.

Please note that just like other asynchronous mode events this event may fire from a secondary thread. Please make sure your code is prepared for that by using appropriate synchronization facilities.

This event does not fire in synchronous mode.

DataSent Event (Sshclient Class)

Notifies the application that a piece of data has been sent to the server.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void dataSent(SshclientDataSentEvent e) {}
  ...
}

public class SshclientDataSentEvent {
  public int bytesSent;
  public int bytesPending;
}

Remarks

Subscribe to this event to be notified about the outbound data flow. This event fires following a call to Send or SendBytes methods to notify the application that the data provided has been sent to the server. This event may fire more than once for each Send or SendBytes call, subject to the volume of data being sent and the settings of the server.

The BytesSent parameter specifies the number of bytes that has just been sent to the server. The BytesPending indicate the number of bytes that remain cached in the internal buffer. Any bytes cached in such way will be sent again on the next available opportunity and reported via a separate DataSent event invocation.

Please note that just like other asynchronous mode events this event may fire from a secondary thread. Please make sure your code is prepared for that by using appropriate synchronization facilities.

This event does not fire in synchronous mode.

Disconnect Event (Sshclient Class)

This event is fired when the SFTP subsystem connection is closed.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void disconnect(SshclientDisconnectEvent e) {}
  ...
}

public class SshclientDisconnectEvent {
  public int closeReason;
}

Remarks

Do not perform any file operations after this event has been fired.

Error Event (Sshclient Class)

Information about errors during SFTP connection.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void error(SshclientErrorEvent e) {}
  ...
}

public class SshclientErrorEvent {
  public int errorCode;
  public String description;
}

Remarks

The event is fired in case of exceptional conditions during data transfer.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of error codes please refer to SFTP.

ExternalSign Event (Sshclient Class)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void externalSign(SshclientExternalSignEvent e) {}
  ...
}

public class SshclientExternalSignEvent {
  public String operationId;
  public String hashAlgorithm;
  public String pars;
  public String data;
  public String signedData;
}

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

KnownKeyReceived Event (Sshclient Class)

Signals that the server has introduced itself with a known key.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void knownKeyReceived(SshclientKnownKeyReceivedEvent e) {}
  ...
}

public class SshclientKnownKeyReceivedEvent {
  public String algorithm;
  public int bits;
  public String fingerprintSHA256;
}

Remarks

The class fires this event to tell the application that the server has introduced itself with a known key from TrustedKeysFile.

The details of the key are provided: Algorithm and Bits specify the key algorithm and the number of bits. FingerprintSHA256 contains the key's fingerprint.

Use ServerKey to access more key details.

Notification Event (Sshclient Class)

This event notifies the application about an underlying control flow event.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void notification(SshclientNotificationEvent e) {}
  ...
}

public class SshclientNotificationEvent {
  public String eventID;
  public String eventParam;
}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

PasswordChangeRequest Event (Sshclient Class)

This event is fired when a password change is requested.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void passwordChangeRequest(SshclientPasswordChangeRequestEvent e) {}
  ...
}

public class SshclientPasswordChangeRequestEvent {
  public String prompt;
  public String newPassword;
  public boolean cancel;
}

Remarks

This event is fired by the class when a password change is requested by the server. Prompt contains the password prompt message. Handler should either provide the new password via NewPassword, or deny the request by setting Cancel to true.

PrivateKeyNeeded Event (Sshclient Class)

This event is fired when client's public key was accepted by the server, but the corresponding secret key is not available.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void privateKeyNeeded(SshclientPrivateKeyNeededEvent e) {}
  ...
}

public class SshclientPrivateKeyNeededEvent {
  public boolean skip;
}

Remarks

Set Skip to true when it is not possible to load the missing key for some reason.

UnknownKeyReceived Event (Sshclient Class)

Signals that the server has introduced itself with an unknown key.

Syntax

public class DefaultSshclientEventListener implements SshclientEventListener {
  ...
  public void unknownKeyReceived(SshclientUnknownKeyReceivedEvent e) {}
  ...
}

public class SshclientUnknownKeyReceivedEvent {
  public String algorithm;
  public int bits;
  public String fingerprintSHA256;
  public int action;
}

Remarks

The class fires this event to tell the application that the server has introduced itself with a key not present in TrustedKeysFile.

The details of the key are provided: Algorithm and Bits specify the key algorithm and the number of bits. FingerprintSHA256 contains the key's fingerprint.

In this event handler, you need to make a decision whether to proceed with the connection. Use Action to tell the class what it should do with the key:

catAcceptOnce1Accept the key for the current session only.
catAcceptPermanently2Accept the key for the current session and store the key to the trusted keys list.
catReject3Reject the key and close the connection.
Note that accepting an unknown and unchecked key may be risky.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

AsyncDocumentID
String

Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CustomParams
String

Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

Data
String

Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor

ExternalHashCalculation
boolean

Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

HashAlgorithm
String

Default Value: "SHA256"

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

KeyID
String

Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

KeySecret
String

Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the KeyID topic.

Method
int

Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Mode
int

Default Value: 0

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

PublicKeyAlgorithm
String

Default Value: ""

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Constructors

public ExternalCrypto();

Creates a new ExternalCrypto object with default field values.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Address
String

Default Value: ""

The IP address of the proxy server.

Authentication
int

Default Value: 0

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Password
String

Default Value: ""

The password to authenticate to the proxy server.

Port
int

Default Value: 0

The port on the proxy server to connect to.

ProxyType
int

Default Value: 0

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

RequestHeaders
String

Default Value: ""

Contains HTTP request headers for WebTunnel and HTTP proxy.

ResponseBody
String

Default Value: ""

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

ResponseHeaders
String

Default Value: ""

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

UseIPv6
boolean

Default Value: False

Specifies whether IPv6 should be used when connecting through the proxy.

UseProxy
boolean

Default Value: False

Enables or disables proxy-driven connection.

Username
String

Default Value: ""

Specifies the username credential for proxy authentication.

Constructors

public ProxySettings();

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields

DNSMode
int

Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

dmAuto0
dmPlatform1
dmOwn2
dmOwnSecure3

DNSPort
int

Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
int

Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates the infinite timeout.

DNSServers
String

Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
int

Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates the infinite timeout.

IncomingSpeedLimit
int

Default Value: 0

The maximum number of bytes to read from the socket, per second.

LocalAddress
String

Default Value: ""

The local network interface to bind the socket to.

LocalPort
int

Default Value: 0

The local port number to bind the socket to.

OutgoingSpeedLimit
int

Default Value: 0

The maximum number of bytes to write to the socket, per second.

Timeout
int

Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
boolean

Default Value: False

Enables or disables IP protocol version 6.

Constructors

public SocketSettings();

Creates a new SocketSettings object.

SSHInfo Type

Contains information about SSH connection.

Remarks

SSHInfo object contains information about one SSH connection.

Fields

ClientKeyAlgorithm
String (read-only)

Default Value: ""

Specifies the client's key algorithm.

ClientKeyBits
int (read-only)

Default Value: 0

Specifies the length of the client's key.

ClientKeyFingerprint
String (read-only)

Default Value: ""

The fingerprint (hash value) of the client's public key.

CloseReason
String (read-only)

Default Value: ""

Contains the line sent by the server just before closing the connection. It might contain the error description if the connection was not closed gracefully.

CompressionAlgorithmInbound
String (read-only)

Default Value: ""

Compression algorithm for the incoming traffic.

CompressionAlgorithmOutbound
String (read-only)

Default Value: ""

Compression algorithm for the outgoing traffic.

EncryptionAlgorithmInbound
String (read-only)

Default Value: ""

Encryption algorithm for the incoming traffic.

EncryptionAlgorithmOutbound
String (read-only)

Default Value: ""

Encryption algorithm for the outgoing traffic.

InboundEncryptionKeyBits
int (read-only)

Default Value: 0

Specifies the length of the key used to encrypt the incoming traffic.

KexAlgorithm
String (read-only)

Default Value: ""

The key exchange algorithm used during the SSH handshake.

KexBits
int (read-only)

Default Value: 0

The number of bits used by the key exchange algorithm.

KexLines
String (read-only)

Default Value: ""

The contents of the received KexInit packet.

KexInit packet contains the list of algorithms supported by the remote party.

MacAlgorithmInbound
String (read-only)

Default Value: ""

MAC algorithm used for the incoming connection.

MacAlgorithmOutbound
String (read-only)

Default Value: ""

MAC algorithm used for outbound connection.

OutboundEncryptionKeyBits
int (read-only)

Default Value: 0

Specifies the length of the key used to encrypt the outgoing traffic.

PublicKeyAlgorithm
String (read-only)

Default Value: ""

Specifies the public key algorithm which was used during the SSH handshake.

ServerKeyBits
int (read-only)

Default Value: 0

Specifies the number of bits in the server's key.

ServerKeyFingerprint
String (read-only)

Default Value: ""

The fingerprint (hash value) of the server's public key.

ServerSoftwareName
String (read-only)

Default Value: ""

Returns the name of the SSH software running on the server side.

TotalBytesReceived
long (read-only)

Default Value: 0

Returns the total number of bytes received over this connection.

TotalBytesSent
long (read-only)

Default Value: 0

Returns the total number of bytes sent over this connection.

Version
int (read-only)

Default Value: 2

Specifies SSH protocol version.

Constructors

public SSHInfo();

Creates an empty object representing a SSH connection info.

SSHKey Type

SSHKey is used to store information about single compound public-key algorithm (such as RSA or DSA) key.

Remarks

SSH keys are used to secure the SSH protocol flow. They support different algorithms and key lengths, a very typical example being RSA-2048 bits.

Fields

Algorithm
String (read-only)

Default Value: ""

Specifies the key algorithm.

Bits
int (read-only)

Default Value: 0

The number of bits in the key: the more the better, 2048 or 4096 are typical values.

Comment
String

Default Value: ""

The comment for the public key.

Curve
String (read-only)

Default Value: ""

Specifies the elliptical curve when EC cryptography is used.

DSSG
byte[] (read-only)

Default Value: ""

The G (Generator) parameter of the DSS signature key. The string should contain the binary data of G.

DSSP
byte[] (read-only)

Default Value: ""

The P (Prime) parameter of the DSS signature key. The string should contain the binary data of P.

DSSQ
byte[] (read-only)

Default Value: ""

The Q (Prime Factor) parameter of the DSS signature key. The string should contain the binary data of Q.

DSSX
byte[] (read-only)

Default Value: ""

The X (Private key) parameter of the DSS signature key. The string should contain the binary data of X.

This parameter may be empty if there's no need to sign data with this key (e.g. if the key is a server public key needed only to authenticate the server).

DSSY
byte[] (read-only)

Default Value: ""

The Y (Public key) parameter of the DSS signature key. The string should contain the binary data of Y.

ECCD
byte[] (read-only)

Default Value: ""

The value of the secret key (the order of the public key, D) if elliptic curve (EC) cryptography is used. The string should contain the binary data of D.

ECCQX
byte[] (read-only)

Default Value: ""

The value of the X coordinate of the public key if elliptic curve (EC) cryptography is used. The string should contain the binary data of X.

ECCQY
byte[] (read-only)

Default Value: ""

The value of the Y coordinate of the public key if elliptic curve (EC) cryptography is used. The string should contain the binary data of Y.

EdPrivate
byte[] (read-only)

Default Value: ""

The value of the private key if EdDSA (Edwards-curve Digital Signature Algorithm) algorithm is used.

EdPublic
byte[] (read-only)

Default Value: ""

The value of the public key if EdDSA (Edwards-curve Digital Signature Algorithm) algorithm is used.

FingerprintMD5
String (read-only)

Default Value: ""

Contains the MD5 fingerprint (hash) of the key.

FingerprintSHA1
String (read-only)

Default Value: ""

Contains the SHA-1 fingerprint (hash) of the key.

FingerprintSHA256
String (read-only)

Default Value: ""

Contains the SHA-256 fingerprint (hash) of the key.

IsExtractable
boolean (read-only)

Default Value: False

Whether the key is extractable (e.g., from a security token), or not.

IsPrivate
boolean (read-only)

Default Value: False

Whether this key is a private key or not.

IsPublic
boolean (read-only)

Default Value: False

Whether this key is a public key or not.

KDFRounds
int (read-only)

Default Value: 0

Returns the number of iterations of the Key Derivation Function (KDF) used to generate this key.

KDFSalt
byte[] (read-only)

Default Value: ""

The salt value used by the Key Derivation Function (KDF) to generate this key.

KeyFormat
int (read-only)

Default Value: 0

Specifies the format in which the key is stored.

ckfOpenSSH0
ckfOpenSSH21
ckfIETF2
ckfPuTTY3
ckfX5094
ckfBinary5
ckfSSH16
ckfPGP7
ckfPKCS88
ckfPuTTY39

KeyProtectionAlgorithm
String (read-only)

Default Value: ""

Specifies the key protection algorithm.

RSAExponent
byte[] (read-only)

Default Value: ""

Returns the e parameter (public exponent) of the RSA key.

RSAIQMP
byte[] (read-only)

Default Value: ""

Returns the iqmp parameter of the RSA key.

RSAModulus
byte[] (read-only)

Default Value: ""

Returns the m parameter (public modulus) of the RSA key.

RSAP
byte[] (read-only)

Default Value: ""

Returns the p parameter (first factor of the common modulus n) of the RSA key.

RSAPrivateExponent
byte[] (read-only)

Default Value: ""

Returns the d parameter (private exponent) of the RSA key.

RSAQ
byte[] (read-only)

Default Value: ""

Returns the q parameter (second factor of the common modulus n) of the RSA key.

Subject
String

Default Value: ""

Specifies the public key owner (subject). This property is used only for IETF-keys.

Constructors

public SSHKey( bytes,  startIndex,  count,  password);

Loads private key from the Bytes buffer. Parameters StartIndex and Count specify the starting index of the key data and its length, correspondingly. Provide a Password to decrypt the key.

public SSHKey( bytes,  startIndex,  count);

Loads public key from the Bytes buffer. Parameters StartIndex and Count specify the starting index of the key data and its length, correspondingly.

public SSHKey( stream,  password);

Loads private key from the stream. Provide a Password to decrypt the key.

public SSHKey( stream);

Loads public key from the stream.

public SSHKey( path,  password);

Loads private key from the file. Provide a Path to the file and Password to decrypt the key.

public SSHKey( path);

Loads public key from the file specified by Path .

public SSHKey();

Creates a new key.

SSHSettings Type

A container for various SSH protocol settings.

Remarks

SSHSettings stores various settings of SSH client or server.

Fields

AutoAdjustCiphers
boolean

Default Value: True

Whether the SSH client should adjust its list of supported ciphers 'on-the-fly' for greater compatibility with the server it is connecting to.

BaseConfiguration
int

Default Value: 0

Allows to choose base configuration of SSH settings, tuned up for different purposes such as high security or higher compatibility.

CompressionAlgorithms
String

Default Value: ""

A list of session compression algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all compression algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of compression algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported compression algorithms is provided below:

  • none
  • zlib
  • zlib@openssh.com

CompressionLevel
int

Default Value: 6

Possible values for the Compression Level range from 0 (minimum compression) to 9 (maximum compression). This setting is ignored if compression wasn't accepted.

DefaultWindowSize
int

Default Value: 2048000

The SSH window size specifies how many bytes the client can send to the server in the command channel without obtaining pre-authorization for the further send from the server.

EncryptionAlgorithms
String

Default Value: ""

A list of session encryption algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all encryption algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of encryption algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported encryption algorithms is provided below:

  • 3des-cbc
  • blowfish-cbc
  • twofish256-cbc
  • twofish192-cbc
  • twofish128-cbc
  • aes256-cbc
  • aes192-cbc
  • aes128-cbc
  • serpent256-cbc
  • serpent192-cbc
  • serpent128-cbc
  • arcfour
  • idea-cbc
  • cast128-cbc
  • none
  • des-cbc
  • aes128-ctr
  • aes192-ctr
  • aes256-ctr
  • 3des-ctr
  • blowfish-ctr
  • twofish128-ctr
  • twofish192-ctr
  • twofish256-ctr
  • serpent128-ctr
  • serpent192-ctr
  • serpent256-ctr
  • idea-ctr
  • cast128-ctr
  • arcfour128
  • arcfour256
  • aes128-gcm
  • aes256-gcm
  • aes128-gcm@openssh.com
  • aes256-gcm@openssh.com
  • chacha20-poly1305
  • chacha20-poly1305@openssh.com

ForceCompression
boolean

Default Value: False

Whether the SSH client should explicitly request compression.

If ForceCompression is False, compression will be used only if the server doesn't support algorithms without compression.

GSSAuthTypes
String

Default Value: ""

A comma-separated list of authentication types. Two types are currently supported: gssapi-with-mic and gssapi-keyex.

GSSDelegateCreds
boolean

Default Value: False

Switches credential delegation on or off.

GSSHostname
String

Default Value: ""

The GSS host name, in form of a FQDN (e.g. hostname.com), a principal name (e.g. 'host@hostname.com), or a cross-real ticket-granting ticket (e.g. krbtgt/test.com@example.com).

GSSLib
String

Default Value: ""

A path to the GSS-API library (DLL or SO).

GSSMechanisms
String

Default Value: ""

A comma-separated list of GSS mechanisms to use. Two values are currently supported: lib and SSPI.

GSSProtocols
String

Default Value: ""

A comma-separated list of SSPI protocols. Two protocols are currently supported: kerberos and NTLM.

HandshakeTimeout
int

Default Value: 45

Specifies the maximal time for the SSH handshake to proceed, in seconds. If the handshake is not completed within this period, the session is aborted.

KexAlgorithms
String

Default Value: ""

A list of key exchange algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all key exchange algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of key exchange algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported kex algorithms is provided below:

  • diffie-hellman-group-exchange-sha1
  • diffie-hellman-group1-sha1
  • diffie-hellman-group14-sha1
  • diffie-hellman-group-exchange-sha256
  • rsa1024-sha1
  • rsa2048-sha256
  • ecdh-sha2-nistp256
  • ecdh-sha2-nistp384
  • ecdh-sha2-nistp521
  • ecdh-sha2-nistk163
  • ecdh-sha2-nistp192
  • ecdh-sha2-nistp224
  • ecdh-sha2-nistk233
  • ecdh-sha2-nistb233
  • ecdh-sha2-nistk283
  • ecdh-sha2-nistk409
  • ecdh-sha2-nistb409
  • ecdh-sha2-nistt571
  • ecdh-sha2-curve25519
  • curve25519-sha256@libssh.org
  • curve448-sha512@libssh.org
  • diffie-hellman-group14-sha256
  • diffie-hellman-group15-sha512
  • diffie-hellman-group16-sha512
  • diffie-hellman-group17-sha512
  • diffie-hellman-group18-sha512

MacAlgorithms
String

Default Value: ""

A list of MAC (for message authentication code) algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all MAC algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of MAC algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported MAC algorithms is provided below:

  • hmac-sha1
  • hmac-sha1-96
  • hmac-md5
  • hmac-md5-96
  • none
  • hmac-ripemd160
  • hmac-ripemd
  • hmac-ripemd160@openssh.com
  • hmac-sha256@ssh.com
  • hmac-sha256-96@ssh.com
  • umac-32@openssh.com
  • umac-64@openssh.com
  • umac-96@openssh.com
  • umac-128@openssh.com
  • hmac-sha2-256
  • hmac-sha2-512
  • aes128-gcm
  • aes256-gcm
  • chacha20-poly1305@openssh.com
  • hmac-sha2-256-etm@openssh.com
  • hmac-sha2-512-etm@openssh.com

MaxSSHPacketSize
int

Default Value: 262144

Specifies the maximum length of one SSH packet in bytes.

MinWindowSize
int

Default Value: 2048

Specifies the minimal internal window size. When the minimal window size is reached, the 'window extension' request is sent to the server. This request notifies the server that the window was extended, and it can send more data.

ObfuscateHandshake
boolean

Default Value: False

Enables or disables handshake obfuscation.

ObfuscationPassword
String

Default Value: ""

Specifies the password used to encrypt the handshake when ObfuscateHandshake is set.

PublicKeyAlgorithms
String

Default Value: ""

A list of public key algorithms separated with commas or semicolons. Each algorithm in the list may be prefixed with a minus sign (-) to indicate that the algorithm should be disabled rather than enabled. Besides the specific algorithm names, this property supports the all (and -all) aliases that allow to blanketly enable or disable all public key algorithms at once.

Note: the list of algorithms provided to this property alters the baseline list of public key algorithms pre-configured for this component. Remember to start your algorithm string with -all; if you need to only enable a specific fixed set of algorithms. The list of supported public key algorithms is provided below:

  • ssh-dss
  • ssh-rsa
  • x509v3-sign-rsa
  • x509v3-sign-dss
  • spki-sign-rsa,
  • spki-sign-dss
  • pgp-sign-rsa
  • pgp-sign-dss
  • ecdsa-sha2-nistp256
  • ecdsa-sha2-nistp384
  • ecdsa-sha2-nistp521
  • ecdsa-sha2-nistk163
  • ecdsa-sha2-nistp192
  • ecdsa-sha2-nistp224
  • ecdsa-sha2-nistk233
  • ecdsa-sha2-nistb233
  • ecdsa-sha2-nistk283
  • ecdsa-sha2-nistk409
  • ecdsa-sha2-nistb409
  • ecdsa-sha2-nistt571,
  • ecdsa-sha2-curve25519
  • x509v3-ssh-rsa
  • x509v3-ssh-dss
  • x509v3-rsa2048-sha256
  • x509v3-ecdsa-sha2-nistp256
  • x509v3-ecdsa-sha2-nistp384
  • x509v3-ecdsa-sha2-nistp521
  • x509v3-ecdsa-sha2-nistk163
  • x509v3-ecdsa-sha2-nistp192
  • x509v3-ecdsa-sha2-nistp224
  • x509v3-ecdsa-sha2-nistk233
  • x509v3-ecdsa-sha2-nistb233
  • x509v3-ecdsa-sha2-nistk283
  • x509v3-ecdsa-sha2-nistk409
  • x509v3-ecdsa-sha2-nistb409
  • x509v3-ecdsa-sha2-nistt571
  • x509v3-ecdsa-sha2-curve25519
  • ssh-ed25519
  • ssh-ed448
  • rsa-sha2-256
  • rsa-sha2-512

RequestPasswordChange
boolean

Default Value: False

Whether to request a password change when connecting.

SoftwareName
String

Default Value: "SecureBlackbox"

The name to be used by the component to identify itself.

TrustAllKeys
boolean

Default Value: False

Enables or disables explicit trust to all server keys. Use with care.

UseAuthAgent
boolean

Default Value: False

Enables or disables the use of external key agent, such as Putty key agent.

Versions
int

Default Value: 1

Specifies enabled SSH protocol versions (1 or 2).

Constructors

public SSHSettings();

Creates a new object with default settings.

SSHTerm Type

A container for SSH terminal settings.

Remarks

SSHTerm stores terminal settings of the SSH client.

Fields

Cols
int

Default Value: 80

Specifies the width of the pseudoterminal, in characters.

Environment
String

Default Value: ""

Specifies the list of environment variables.

EOLChar
byte[]

Default Value: ""

Specifies the End-of-Line character or sequence.

Height
int

Default Value: 0

Specifies the height of the pseudoterminal, in pixels.

Opcodes
String

Default Value: ""

Specifies the operation codes specific for the terminal.

Protocol
String

Default Value: "vt100"

The terminal protocol name.

RequestPty
boolean

Default Value: True

Specifies whether to request a pseudoterminal for the session.

Rows
int

Default Value: 25

Specifies the height of the pseudoterminal, in lines.

Width
int

Default Value: 0

Specifies the width of the pseudoterminal, in pixels.

Config Settings (Sshclient Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

SSHClient Config Settings

BlockSize:   The data block size.

This property specifies the data block size to use.

ErrorOrigin:   Specifies whether the error is local or remote.

Use this property to check where the error took place.

ErrorSeverity:   Specifies whether the error is fatal.

Use this property to check whether the error is fatal or not.

LocalCharset:   Charset used on the client machine.

This property specifies the charset used on the local client computer.

RemoteCharset:   Charset used on the server.

This property specifies the charset used on the server.

SendCommandEOF:   Defines whether EOF control character should be sent after the command data.

Enable this property to enforce sending of a trailing EOF character after the command data.

ThrottleControl:   Enables or disables throttle control for the connection.

Use this property to enable or disable throttle control.

UseStrictKeyExchange:   Specifies how strict key exchange is supported.

This setting controls whether strict key exchange (strict kex) is enabled to mitigate the Terrapin attack. When enabled, the class will indicate support for strict key exchange by automatically including the pseudo-algorithm kex-strict-c-v00@openssh.com for client classes and kex-strict-s-v00@openssh.com for server classes in the list of supported key exchange algorithms.

Since both client and server must implement strict key exchange to effectively mitigate the Terrapin attack, the class provides options to further control the behavior in different scenarios. Possible values for this setting are:

0Disabled. Strict key exchange is not supported in the class.
1 (default)Enabled, but not enforced. This setting enables strict key exchange, but if the remote host does not support strict key exchange the connection is still allowed to continue.
2Enabled, but reject affected algorithms if the remote host does not support strict key exchange. If the remote host supports strict key exchange all algorithms may be used. If the remote host does not support strict key exchange the connection will only continue if the selected encryption and MAC algorithms are not affected by the Terrapin attack.
3Required. If the remote host does not support strict key exchange the connection will fail.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (Sshclient Class)