XAdESSigner Component

Properties   Methods   Events   Config Settings   Errors  

The XAdESSigner component creates XAdES-compliant signature files.

Syntax

TsbxXAdESSigner

Remarks

XAdESSigner can sign XML documents in accordance with XAdES standard. Originally developed and adopted in the European Union, XAdES has quickly become a recognized international standard for signing XML documents. XAdES provides a convenient framework for creating short-lived and long-term signatures over any kind of XML documents, and is now used by governments, healthcare providers, banks, and independent service providers all across the globe. XAdESSigner signer = new XAdESSigner(); signer.getNewSignature().setHashAlgorithm("SHA512"); // Default hashing algorithm SHA256 signer.getNewSignature().setLevel(XAdESSignature.aslBaselineT); // Level of the signature // Select the document which contains the file that will be signed signer.setInputFile("MyFile.xml"); // Select the path where you want to save the signed document signer.setOutputFile("signedFile.xml"); // The certificate which the document will be signed with signer.setSigningCertificate(new Certificate("test.pfx","test")); // Provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature signer.setTimestampServer("http://time.certum.pl"); signer.sign();

Standards and technologies supported

XAdESSigner offers the following signing capabilities:

• Create and upgrade XAdES signatures in accordance with the most recent XAdES specification (ETSI EN 319 132). Earlier versions are also supported.
• All profiles are supported (BES, EPES, T, C, X, XL, A, including the Extended variants).
• Timestamping using external TSAs.
• All industry-standard cryptographic algorithms (RSA, ECDSA, SHA256-512, and many others).

Configuring the signature parameters

Configuring XAdESSigner to make it produce a signature of the right type is the main task you would need to perform in your code. Normally the service or software you will be communicating your XML documents to will provide you with the list of requirements that your signatures should match.

Typically, those will dictate the following key aspects of the signatures:

• The signature Form, sometimes referred to as Level (such BES, T, XL, A, or Extended-XLong). This can be adjusted with the NewSigLevel property.
• Whether the signature should be detached, enveloped, or enveloping: adjust via NewSigSignatureType property.
• When creating a timestamped signature (such as T or A), provide the address of your online TSA service via TimestampServer property.
• When creating long-term signatures that include the signing chain and validation material, tune up validation parameters via RevocationCheck, OfflineMode, and IgnoreChainValidationErrors properties.

In some circumstances you will also need to adjust the following lower-level settings:

• Choose a specific XAdES version between 1.4.1, 1.3.2, 1.2.2, and 1.1.1, and assign it to NewSigXAdESVersion property.
• Specify the needed canonicalization method using the NewSigCanonicalizationMethod property.
• Provide the hash algorithm via the NewSigHashAlgorithm property.

Signing certificates

XAdESSigner can use certificates residing on different media. Besides generic certificates stored in PFX or PEM files (A1), it can operate with non-exportable certificates residing on hardware media (A3) or in the cloud.

Non-exportable certificates can be accessed transparently via a Windows CSP or a PKCS#11 driver, if supplied by the certificate issuer. Proprietary interfaces can be plugged in with the external signing feature (see below).

You can use CertificateManager and CertificateStorage components to access the signing certificate. Assign the certificate to SigningCertificate property, and optionally provide the remainder of its chain via SigningChain property.

Note: If signing with a non-exportable key (such as residing on a hardware device or in the cloud), please make sure you keep the original CertificateStorage object open until the signing is completed. This is because the storage component provides a 'bridge' to the private key. If the storage is closed prematurely, this bridge is destroyed, and the private key can't be used.

You don't need to provide a signing certificate or chain when timestamping and upgrading signatures, since this type of operation does not involve the signing private key.

Signing the document

Now that you have set up all signature properties and attached the signing certificate, it is time to proceed to signing. You can provide the input document in one of the following forms: as a file (assign the path to InputFile property), as a stream (assign to InputStream property), or as a byte array (assign to InputBytes). Similarly, the output can be collected in one of the same forms, either by passing the destination path or stream via OutputFile and OutputStream respectively, or by reading the resulting document bytes from the OutputBytes property after the signing completes.

Having set up the input and output (unless using OutputBytes, which should be read later), call the component's Sign method. This will initiate the signing process. Depending on the settings, the signing may be as straightforward as calculating the document hash and signing it with the private key (e.g. in XAdES-BES variant), or it may involve advanced chain validation routines (XAdES-XL or -A). During the latter the component may contact a number of external revocation information sources (CRL and OCSP servers) to establish the validity of the signing certificate.

If a TSA server was provided via the TimestampServer property, the component will contact it too to timestamp the new signature.

During the signing XAdESSigner may fire events to let your code know of certain conditions. It may fire TLSCertValidate if one of the HTTP endpoints involved in the operation (which may be a CRL, OCSP, or TSA service) works over TLS and needs its certificate to be validated. It may also fire FormatElement and FormatText to let your code apply custom formatting to XML document elements. If XAdESSigner fails to resolve one of the references in the signature, it will fire ResolveReference to let your code help with resolving it.

When the signing operation completes, the output file, stream, or byte array will contain the signature of the requested kind. Note that while nveloped and enveloping signatures contain the signed content within them, detached signatures assume that you supply the original content separately.

Apart from signing, XAdESSigner can perform operations on signatures of other kinds. Use Upgrade method to upgrade an existing XAdES signature to a higher level (e.g. BES to XL). Use Timestamp to add a generic or validation timestamp to an existing signature.

External signing and DCAuth

XAdESSigner, like many other components offered by the product, supports two methods of signing with external keys. These methods are fully independent of each other: you can choose the one that suits your usage scenario best.

Synchronous method: ExternalSign

This is a simpler method that basically lets you infiltrate into the heart of the signing routine by taking care of the hash signing operation. The component does the rest of the job (hash calculation, preparation of signature objects, CRL/OCSP retrieval).

To initiate this method, call SignExternal instead of Sign. When the hash is ready, it will be passed back to your code with ExternalSign event. Your event handler needs to sign the hash with the private key and return the created signature back to the component - which will embed it into the document.

You don't need your signing certificate to contain an associated private key when using this method. The certificate itself (its public copy) may be needed though, as it is often included in the hash calculation.

This method is synchronous, meaning SignExternal provides you the results immediately upon its completion.

Asynchronous method: DCAuth

DCAuth is a SecureBlackbox-own know-how technology. This protocol was designed to allow sharing of private keys across environments, allowing the signer and the private key to reside on different systems. It works in the following way:

• The signing party - such as XAdESSigner - initiates the operation using SignAsyncBegin call. This produces two outcomes: a pre-signed document (a document with a blank signature placeholder), and a request state (an object containing a hash that needs to be signed). At this point the XAdESSigner instance can be released, and the process itself terminated (which may be useful when run as part of a web page).
• The request state is passed to the private key holder party. The private key holder passes the request state to a DCAuth object, which parses the request state, extracts the hash, and signs it. The output of DCAuth processing is another object, response state, which contains the signature. The private key holder then sends the response state back to the signing party.
• The signing party re-creates the controls, and passes the response state, together with the pre-signed version of the document, to the signer's SignAsyncEnd method. SignAsyncEnd extracts the signature from the response state and incorporates it into the pre-signed document.

This method is asynchronous in that sense that, from the signing party's viewpoint, it splits the signing operation into the pre-signing and completion stages which can be performed independently from each other and in different execution contexts. This makes this method particularly helpful for use in web pages and other scenarios where the signing key is not available in real time.

Fine-grained chain validation setup

Chain validation is a sophisticated, multi-faceted procedure that involves a lot of variables. Depending on the configuration of your operating environment, the specifics of the PKI framework being used, and the validation policy you need to follow, you may want to tune up your chain validation parameters so they fit them best. A summary of such parameters is given below.

• RevocationCheck lets you choose between and/or prioritize revocation origins. OCSP sources are often preferred to CRL because of their real-time capability and the smaller size of validation tokens they produce.
• OfflineMode is a master switch that stops the component from looking for any validation tokens online. If this property is switched on, the component will only use the KnownCertificates, TrustedCertificates, KnownCRLs, and KnownOCSPs collections to look for the missing validation material.
• IgnoreChainValidationErrors makes the component ignore any major validation issues it encounters (such us an untrusted chain or missing CRL). This option is handy for debugging and for creating signatures in the environments where the signing certificate is not trusted.
• KnownCertificates, KnownCRLs, and KnownOCSPs let you provide your own validation material. This may be useful when working in OfflineMode, where the signer has no access to the validation sources, or where the validation material has already been collected.
• TrustedCertificates lets you provide a list of trust anchors, either as a complement to the system's or as an alternative to it.
• BlockedCertificates lets you provide a list of blocked/distrusted certificates. Any CA certificate contained in it will be deemed untrusted/invalid.

The following parameters are not directly related to chain validation, but may have an implicit effect on it.

• Proxy, SocketSettings, and TLSSettings let you tune up the connectivity and TLS options in accordance with local preferences.
• TLSClientChain lets you provide the client certificate and its chain for TLS client authentication.
• Subscribe to TLSCertValidate to validate any TLS certificates of the services involved in chain validation.

The results of the chain validation procedure, upon its completion, are published in the following properties:

• ChainValidationResult contains the primary result of the chain validation routine: valid, valid but untrusted, invalid, or undefined.
• ChainValidationDetails provides the details of the factors that contributed to the chain validation result, such as an outdated certificate, a missing CRL, or a missing CA certificate.
• ValidationLog contains the detailed chain validation log. The log can often be very helpful in nailing down various validation issues.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AutoValidateSignatures Property (XAdESSigner Component)

Specifies whether component should validate any present signatures when the document is opened.

Syntax

__property bool AutoValidateSignatures = { read=FAutoValidateSignatures, write=FSetAutoValidateSignatures };

Default Value

false

Remarks

This setting is switched off by default to speed up document processing. Even if the document is loaded with this property set to false, you can validate the signatures manually on a later stage using the Revalidate method.

Data Type

Boolean

BlockedCertCount Property (XAdESSigner Component)

The number of records in the BlockedCert arrays.

Syntax

__property int BlockedCertCount = { read=FBlockedCertCount, write=FSetBlockedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• BlockedCertBytes
• BlockedCertHandle

The array indices start at 0 and end at BlockedCertCount - 1.

This property is not available at design time.

Data Type

Integer

BlockedCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray BlockedCertBytes[int BlockedCertIndex] = { read=FBlockedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

BlockedCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 BlockedCertHandle[int BlockedCertIndex] = { read=FBlockedCertHandle, write=FSetBlockedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The BlockedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the BlockedCertCount property.

This property is not available at design time.

Data Type

Long64

CheckTrustedLists Property (XAdESSigner Component)

Specifies whether the component should attempt to validate chain trust via a known Trusted List.

Syntax

__property bool CheckTrustedLists = { read=FCheckTrustedLists, write=FSetCheckTrustedLists };

Default Value

false

Remarks

Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).

Data Type

Boolean

CRLCount Property (XAdESSigner Component)

The number of records in the CRL arrays.

Syntax

__property int CRLCount = { read=FCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• CRLBytes
• CRLCAKeyID
• CRLEntryCount
• CRLHandle
• CRLIssuer
• CRLIssuerRDN
• CRLLocation
• CRLNextUpdate
• CRLSigAlgorithm
• CRLSource
• CRLTBS
• CRLThisUpdate

The array indices start at 0 and end at CRLCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

CRLBytes Property (XAdESSigner Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray CRLBytes[int CRLIndex] = { read=FCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLCAKeyID Property (XAdESSigner Component)

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

Syntax

__property DynamicArray CRLCAKeyID[int CRLIndex] = { read=FCRLCAKeyID };

Remarks

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLEntryCount Property (XAdESSigner Component)

Returns the number of certificate status entries in the CRL.

Syntax

__property int CRLEntryCount[int CRLIndex] = { read=FCRLEntryCount };

Default Value

0

Remarks

Returns the number of certificate status entries in the CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Integer

CRLHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 CRLHandle[int CRLIndex] = { read=FCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Long64

CRLIssuer Property (XAdESSigner Component)

The common name of the CRL issuer (CA), typically a company name.

Syntax

__property String CRLIssuer[int CRLIndex] = { read=FCRLIssuer };

Default Value

""

Remarks

The common name of the CRL issuer (CA), typically a company name.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLIssuerRDN Property (XAdESSigner Component)

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Syntax

__property String CRLIssuerRDN[int CRLIndex] = { read=FCRLIssuerRDN };

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLLocation Property (XAdESSigner Component)

The URL that the CRL was downloaded from.

Syntax

__property String CRLLocation[int CRLIndex] = { read=FCRLLocation };

Default Value

""

Remarks

The URL that the CRL was downloaded from.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLNextUpdate Property (XAdESSigner Component)

The planned time and date of the next version of this CRL to be published.

Syntax

__property String CRLNextUpdate[int CRLIndex] = { read=FCRLNextUpdate };

Default Value

""

Remarks

The planned time and date of the next version of this CRL to be published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLSigAlgorithm Property (XAdESSigner Component)

The public key algorithm that was used by the CA to sign this CRL.

Syntax

__property String CRLSigAlgorithm[int CRLIndex] = { read=FCRLSigAlgorithm };

Default Value

"0"

Remarks

The public key algorithm that was used by the CA to sign this CRL.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

CRLSource Property (XAdESSigner Component)

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Syntax

__property TsbxXAdESSignerCRLSources CRLSource[int CRLIndex] = { read=FCRLSource };

enum TsbxXAdESSignerCRLSources {
  pksUnknown=0,
  pksSignature=1,
  pksDocument=2,
  pksUser=3,
  pksLocal=4,
  pksOnline=5
};

Default Value

pksUnknown

Remarks

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Integer

CRLTBS Property (XAdESSigner Component)

The to-be-signed part of the CRL (the CRL without the signature part).

Syntax

__property DynamicArray CRLTBS[int CRLIndex] = { read=FCRLTBS };

Remarks

The to-be-signed part of the CRL (the CRL without the signature part).

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

CRLThisUpdate Property (XAdESSigner Component)

The date and time at which this version of the CRL was published.

Syntax

__property String CRLThisUpdate[int CRLIndex] = { read=FCRLThisUpdate };

Default Value

""

Remarks

The date and time at which this version of the CRL was published.

The CRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the CRLCount property.

This property is read-only and not available at design time.

Data Type

String

DataBytes Property (XAdESSigner Component)

Use this property to pass the external data to component in the byte array form.

Syntax

__property DynamicArray DataBytes = { read=FDataBytes, write=FSetDataBytes };

Remarks

Assign a byte array containing the external data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

DataFile Property (XAdESSigner Component)

A file containing the external data covered by a detached signature.

Syntax

__property String DataFile = { read=FDataFile, write=FSetDataFile };

Default Value

""

Remarks

In the case of a detached signature, use this property to provide the external data to the component from a file. Alternatively, provide the data via DataStream.

Data Type

String

DataType Property (XAdESSigner Component)

Specifies the external data type.

Syntax

__property TsbxXAdESSignerDataTypes DataType = { read=FDataType, write=FSetDataType };

enum TsbxXAdESSignerDataTypes {
  cxdtXML=0,
  cxdtBinary=1,
  cxdtBase64=2
};

Default Value

cxdtXML

Remarks

Use this property to specify the type of the external data (either DataFile, DataStream or DataBytes properties) for component.

Data Type

Integer

DataURI Property (XAdESSigner Component)

Specifies a detached data resource URI.

Syntax

__property String DataURI = { read=FDataURI, write=FSetDataURI };

Default Value

""

Remarks

Specifies a URI used for data being signed, usually the data filename if stored along with a detached signature.

Data Type

String

Encoding Property (XAdESSigner Component)

Specifies XML encoding.

Syntax

__property String Encoding = { read=FEncoding, write=FSetEncoding };

Default Value

""

Remarks

Use this property to specify the encoding to apply to the XML documents.

Data Type

String

ExternalCryptoAsyncDocumentID Property (XAdESSigner Component)

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

__property String ExternalCryptoAsyncDocumentID = { read=FExternalCryptoAsyncDocumentID, write=FSetExternalCryptoAsyncDocumentID };

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

Data Type

String

ExternalCryptoCustomParams Property (XAdESSigner Component)

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

__property String ExternalCryptoCustomParams = { read=FExternalCryptoCustomParams, write=FSetExternalCryptoCustomParams };

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

This property is not available at design time.

Data Type

String

ExternalCryptoData Property (XAdESSigner Component)

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

__property String ExternalCryptoData = { read=FExternalCryptoData, write=FSetExternalCryptoData };

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

This property is not available at design time.

Data Type

String

ExternalCryptoExternalHashCalculation Property (XAdESSigner Component)

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

__property bool ExternalCryptoExternalHashCalculation = { read=FExternalCryptoExternalHashCalculation, write=FSetExternalCryptoExternalHashCalculation };

Default Value

false

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth component.

If set to true, the component will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

Data Type

Boolean

ExternalCryptoHashAlgorithm Property (XAdESSigner Component)

Specifies the request's signature hash algorithm.

Syntax

__property String ExternalCryptoHashAlgorithm = { read=FExternalCryptoHashAlgorithm, write=FSetExternalCryptoHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

Data Type

String

ExternalCryptoKeyID Property (XAdESSigner Component)

The ID of the pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeyID = { read=FExternalCryptoKeyID, write=FSetExternalCryptoKeyID };

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use ExternalCryptoKeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

Data Type

String

ExternalCryptoKeySecret Property (XAdESSigner Component)

The pre-shared key used for DC request authentication.

Syntax

__property String ExternalCryptoKeySecret = { read=FExternalCryptoKeySecret, write=FSetExternalCryptoKeySecret };

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the ExternalCryptoKeyID topic.

Data Type

String

ExternalCryptoMethod Property (XAdESSigner Component)

Specifies the asynchronous signing method.

Syntax

__property TsbxXAdESSignerExternalCryptoMethods ExternalCryptoMethod = { read=FExternalCryptoMethod, write=FSetExternalCryptoMethod };

enum TsbxXAdESSignerExternalCryptoMethods {
  asmdPKCS1=0,
  asmdPKCS7=1
};

Default Value

asmdPKCS1

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

Data Type

Integer

ExternalCryptoMode Property (XAdESSigner Component)

Specifies the external cryptography mode.

Syntax

__property TsbxXAdESSignerExternalCryptoModes ExternalCryptoMode = { read=FExternalCryptoMode, write=FSetExternalCryptoMode };

enum TsbxXAdESSignerExternalCryptoModes {
  ecmDefault=0,
  ecmDisabled=1,
  ecmGeneric=2,
  ecmDCAuth=3,
  ecmDCAuthJSON=4
};

Default Value

ecmDefault

Remarks

Specifies the external cryptography mode.

Available options:

This property is not available at design time.

Data Type

Integer

ExternalCryptoPublicKeyAlgorithm Property (XAdESSigner Component)

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

__property String ExternalCryptoPublicKeyAlgorithm = { read=FExternalCryptoPublicKeyAlgorithm, write=FSetExternalCryptoPublicKeyAlgorithm };

Default Value

""

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Data Type

String

FIPSMode Property (XAdESSigner Component)

Reserved.

Syntax

__property bool FIPSMode = { read=FFIPSMode, write=FSetFIPSMode };

Default Value

false

Remarks

This property is reserved for future use.

Data Type

Boolean

IgnoreChainValidationErrors Property (XAdESSigner Component)

Makes the component tolerant to chain validation errors.

Syntax

__property bool IgnoreChainValidationErrors = { read=FIgnoreChainValidationErrors, write=FSetIgnoreChainValidationErrors };

Default Value

false

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

Data Type

Boolean

InputBytes Property (XAdESSigner Component)

Use this property to pass the input to component in byte array form.

Syntax

__property DynamicArray InputBytes = { read=FInputBytes, write=FSetInputBytes };

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

Data Type

Byte Array

InputFile Property (XAdESSigner Component)

The XML document to sign.

Syntax

__property String InputFile = { read=FInputFile, write=FSetInputFile };

Default Value

""

Remarks

Provide a path to the XML file to sign.

Data Type

String

KnownCertCount Property (XAdESSigner Component)

The number of records in the KnownCert arrays.

Syntax

__property int KnownCertCount = { read=FKnownCertCount, write=FSetKnownCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCertBytes
• KnownCertHandle

The array indices start at 0 and end at KnownCertCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray KnownCertBytes[int KnownCertIndex] = { read=FKnownCertBytes };

Remarks

Returns the raw certificate data in DER format.

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCertHandle[int KnownCertIndex] = { read=FKnownCertHandle, write=FSetKnownCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCertCount property.

This property is not available at design time.

Data Type

Long64

KnownCRLCount Property (XAdESSigner Component)

The number of records in the KnownCRL arrays.

Syntax

__property int KnownCRLCount = { read=FKnownCRLCount, write=FSetKnownCRLCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownCRLBytes
• KnownCRLHandle

The array indices start at 0 and end at KnownCRLCount - 1.

This property is not available at design time.

Data Type

Integer

KnownCRLBytes Property (XAdESSigner Component)

Returns the raw CRL data in DER format.

Syntax

__property DynamicArray KnownCRLBytes[int KnownCRLIndex] = { read=FKnownCRLBytes };

Remarks

Returns the raw CRL data in DER format.

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownCRLHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownCRLHandle[int KnownCRLIndex] = { read=FKnownCRLHandle, write=FSetKnownCRLHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownCRLIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownCRLCount property.

This property is not available at design time.

Data Type

Long64

KnownOCSPCount Property (XAdESSigner Component)

The number of records in the KnownOCSP arrays.

Syntax

__property int KnownOCSPCount = { read=FKnownOCSPCount, write=FSetKnownOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• KnownOCSPBytes
• KnownOCSPHandle

The array indices start at 0 and end at KnownOCSPCount - 1.

This property is not available at design time.

Data Type

Integer

KnownOCSPBytes Property (XAdESSigner Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray KnownOCSPBytes[int KnownOCSPIndex] = { read=FKnownOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

KnownOCSPHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 KnownOCSPHandle[int KnownOCSPIndex] = { read=FKnownOCSPHandle, write=FSetKnownOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The KnownOCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the KnownOCSPCount property.

This property is not available at design time.

Data Type

Long64

NewSigCanonicalizationMethod Property (XAdESSigner Component)

The XML canonicalization method that was used for signing.

Syntax

__property TsbxXAdESSignerNewSigCanonicalizationMethods NewSigCanonicalizationMethod = { read=FNewSigCanonicalizationMethod, write=FSetNewSigCanonicalizationMethod };

enum TsbxXAdESSignerNewSigCanonicalizationMethods {
  cxcmNone=0,
  cxcmCanon=1,
  cxcmCanonComment=2,
  cxcmExclCanon=3,
  cxcmExclCanonComment=4,
  cxcmMinCanon=5,
  cxcmCanon_v1_1=6,
  cxcmCanonComment_v1_1=7
};

Default Value

cxcmNone

Remarks

The XML canonicalization method that was used for signing.

Supported canonicalization methods:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

Integer

NewSigChainValidationDetails Property (XAdESSigner Component)

The details of a certificate chain validation outcome.

Syntax

__property int NewSigChainValidationDetails = { read=FNewSigChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Integer

NewSigChainValidationResult Property (XAdESSigner Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxXAdESSignerNewSigChainValidationResults NewSigChainValidationResult = { read=FNewSigChainValidationResult };

enum TsbxXAdESSignerNewSigChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Integer

NewSigClaimedSigningTime Property (XAdESSigner Component)

The signing time from the signer's computer.

Syntax

__property String NewSigClaimedSigningTime = { read=FNewSigClaimedSigningTime, write=FSetNewSigClaimedSigningTime };

Default Value

""

Remarks

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigCompatibilityErrors Property (XAdESSigner Component)

Returns compatibility errors encountered during validation.

Syntax

__property int NewSigCompatibilityErrors = { read=FNewSigCompatibilityErrors };

Default Value

0

Remarks

Returns compatibility errors encountered during validation.

Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.

Supported values:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Integer

NewSigContainsLongTermInfo Property (XAdESSigner Component)

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

Syntax

__property bool NewSigContainsLongTermInfo = { read=FNewSigContainsLongTermInfo };

Default Value

false

Remarks

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Boolean

NewSigEntityLabel Property (XAdESSigner Component)

Use this property to get the signature entity label.

Syntax

__property String NewSigEntityLabel = { read=FNewSigEntityLabel };

Default Value

""

Remarks

Use this property to get the signature entity label.

This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 NewSigHandle = { read=FNewSigHandle, write=FSetNewSigHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

Long64

NewSigHashAlgorithm Property (XAdESSigner Component)

The hash algorithm used for signing.

Syntax

__property String NewSigHashAlgorithm = { read=FNewSigHashAlgorithm, write=FSetNewSigHashAlgorithm };

Default Value

"Unknown"

Remarks

The hash algorithm used for signing.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigIssuerRDN Property (XAdESSigner Component)

The Relative Distinguished Name of the signing certificate's issuer.

Syntax

__property String NewSigIssuerRDN = { read=FNewSigIssuerRDN };

Default Value

""

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigLastArchivalTime Property (XAdESSigner Component)

Indicates the most recent archival time of an archived signature This property returns the time of the most recent archival timestamp applied to the signature.

Syntax

__property String NewSigLastArchivalTime = { read=FNewSigLastArchivalTime };

Default Value

""

Remarks

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigLevel Property (XAdESSigner Component)

Specifies which level or form of XAdES should be produced.

Syntax

__property TsbxXAdESSignerNewSigLevels NewSigLevel = { read=FNewSigLevel, write=FSetNewSigLevel };

enum TsbxXAdESSignerNewSigLevels {
  aslUnknown=0,
  aslGeneric=1,
  aslBaselineB=2,
  aslBaselineT=3,
  aslBaselineLT=4,
  aslBaselineLTA=5,
  aslBES=6,
  aslEPES=7,
  aslT=8,
  aslC=9,
  aslX=10,
  aslXType1=11,
  aslXType2=12,
  aslXL=13,
  aslXLType1=14,
  aslXLType2=15,
  aslA=16,
  aslExtendedBES=17,
  aslExtendedEPES=18,
  aslExtendedT=19,
  aslExtendedC=20,
  aslExtendedX=21,
  aslExtendedXType1=22,
  aslExtendedXType2=23,
  aslExtendedXLong=24,
  aslExtendedXL=25,
  aslExtendedXLType1=26,
  aslExtendedXLType2=27,
  aslExtendedA=28
};

Default Value

aslBaselineB

Remarks

Specifies which level or form of XAdES should be produced.

Use this property to specify the level or form of advanced electronic signature to be produced.

Use the Generic value to produce XML-DSIG signature.

The supported levels and forms are:

* For XAdES form from XAdES v1.1.1 use either BES or EPES form values ** Extended forms are supported starting from XAdES v1.3.2

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

Integer

NewSigParentEntity Property (XAdESSigner Component)

Use this property to get the parent signature label.

Syntax

__property String NewSigParentEntity = { read=FNewSigParentEntity, write=FSetNewSigParentEntity };

Default Value

""

Remarks

Use this property to get the parent signature label.

This property contains the unique entity label of the current signature's parent object - typically a higher-level signature or a timestamp.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigPolicyHash Property (XAdESSigner Component)

The signature policy hash value.

Syntax

__property String NewSigPolicyHash = { read=FNewSigPolicyHash, write=FSetNewSigPolicyHash };

Default Value

""

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigPolicyHashAlgorithm Property (XAdESSigner Component)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Syntax

__property String NewSigPolicyHashAlgorithm = { read=FNewSigPolicyHashAlgorithm, write=FSetNewSigPolicyHashAlgorithm };

Default Value

""

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from NewSigPolicyHash.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigPolicyID Property (XAdESSigner Component)

The policy ID that was included or to be included into the signature.

Syntax

__property String NewSigPolicyID = { read=FNewSigPolicyID, write=FSetNewSigPolicyID };

Default Value

""

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigPolicyURI Property (XAdESSigner Component)

The signature policy URI that was included in the signature.

Syntax

__property String NewSigPolicyURI = { read=FNewSigPolicyURI, write=FSetNewSigPolicyURI };

Default Value

""

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

NewSigSerialNumber Property (XAdESSigner Component)

The serial number of the signing certificate.

Syntax

__property DynamicArray NewSigSerialNumber = { read=FNewSigSerialNumber };

Remarks

The serial number of the signing certificate.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

NewSigSignatureBytes Property (XAdESSigner Component)

Returns the binary representation of the XML-DSig/XAdES signature.

Syntax

__property DynamicArray NewSigSignatureBytes = { read=FNewSigSignatureBytes };

Remarks

Returns the binary representation of the XML-DSig/XAdES signature.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

NewSigSignatureType Property (XAdESSigner Component)

The signature type to employ when signing the document.

Syntax

__property TsbxXAdESSignerNewSigSignatureTypes NewSigSignatureType = { read=FNewSigSignatureType, write=FSetNewSigSignatureType };

enum TsbxXAdESSignerNewSigSignatureTypes {
  cxstDetached=1,
  cxstEnveloping=2,
  cxstEnveloped=4
};

Default Value

cxstEnveloped

Remarks

The signature type to employ when signing the document.

This property specifies the signature type to be used when signing the document.

Supported values:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

Integer

NewSigSignatureValidationResult Property (XAdESSigner Component)

The outcome of the cryptographic signature validation.

Syntax

__property TsbxXAdESSignerNewSigSignatureValidationResults NewSigSignatureValidationResult = { read=FNewSigSignatureValidationResult };

enum TsbxXAdESSignerNewSigSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4,
  svtReferenceCorrupted=5
};

Default Value

svtValid

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Integer

NewSigSubjectKeyID Property (XAdESSigner Component)

Contains the subject key identifier of the signing certificate.

Syntax

__property DynamicArray NewSigSubjectKeyID = { read=FNewSigSubjectKeyID };

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

NewSigSubjectRDN Property (XAdESSigner Component)

Contains information about the person owning the signing certificate.

Syntax

__property String NewSigSubjectRDN = { read=FNewSigSubjectRDN };

Default Value

""

Remarks

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigTimestamped Property (XAdESSigner Component)

Use this property to establish whether the signature contains an embedded timestamp.

Syntax

__property bool NewSigTimestamped = { read=FNewSigTimestamped };

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

Boolean

NewSigValidatedSigningTime Property (XAdESSigner Component)

Contains the certified signing time.

Syntax

__property String NewSigValidatedSigningTime = { read=FNewSigValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

NewSigClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigValidationLog Property (XAdESSigner Component)

Contains the complete log of the certificate validation routine.

Syntax

__property String NewSigValidationLog = { read=FNewSigValidationLog };

Default Value

""

Remarks

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is read-only and not available at design time.

Data Type

String

NewSigXAdESVersion Property (XAdESSigner Component)

Specifies XAdES version.

Syntax

__property TsbxXAdESSignerNewSigXAdESVersions NewSigXAdESVersion = { read=FNewSigXAdESVersion, write=FSetNewSigXAdESVersion };

enum TsbxXAdESSignerNewSigXAdESVersions {
  xavUnknown=0,
  xav111=1,
  xav122=2,
  xav132=3,
  xav141=4
};

Default Value

xav132

Remarks

Specifies XAdES version.

This property specifies the version of the XAdES specification the signature should comply with.

The supported vesions are:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

Integer

NewSigXMLElement Property (XAdESSigner Component)

Specifies the XML element where to save the signature or containing the signature.

Syntax

__property String NewSigXMLElement = { read=FNewSigXMLElement, write=FSetNewSigXMLElement };

Default Value

""

Remarks

Specifies the XML element where to save the signature or containing the signature.

This property specifies the XML element where to save the electronic signature or that contains the signature to be validated.

Supported values are:

The parameter specifies the index of the item in the array. The size of the array is controlled by the NewSigCount property.

This property is not available at design time.

Data Type

String

OCSPCount Property (XAdESSigner Component)

The number of records in the OCSP arrays.

Syntax

__property int OCSPCount = { read=FOCSPCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• OCSPBytes
• OCSPEntryCount
• OCSPHandle
• OCSPIssuer
• OCSPIssuerRDN
• OCSPLocation
• OCSPProducedAt
• OCSPSigAlgorithm
• OCSPSource

The array indices start at 0 and end at OCSPCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

OCSPBytes Property (XAdESSigner Component)

A buffer containing the raw OCSP response data.

Syntax

__property DynamicArray OCSPBytes[int OCSPIndex] = { read=FOCSPBytes };

Remarks

A buffer containing the raw OCSP response data.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

OCSPEntryCount Property (XAdESSigner Component)

The number of SingleResponse elements contained in this OCSP response.

Syntax

__property int OCSPEntryCount[int OCSPIndex] = { read=FOCSPEntryCount };

Default Value

0

Remarks

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Integer

OCSPHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 OCSPHandle[int OCSPIndex] = { read=FOCSPHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Long64

OCSPIssuer Property (XAdESSigner Component)

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuer[int OCSPIndex] = { read=FOCSPIssuer };

Default Value

""

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPIssuerRDN Property (XAdESSigner Component)

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

__property String OCSPIssuerRDN[int OCSPIndex] = { read=FOCSPIssuerRDN };

Default Value

""

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPLocation Property (XAdESSigner Component)

The location of the OCSP responder.

Syntax

__property String OCSPLocation[int OCSPIndex] = { read=FOCSPLocation };

Default Value

""

Remarks

The location of the OCSP responder.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPProducedAt Property (XAdESSigner Component)

Specifies the time when the response was produced, in UTC.

Syntax

__property String OCSPProducedAt[int OCSPIndex] = { read=FOCSPProducedAt };

Default Value

""

Remarks

Specifies the time when the response was produced, in UTC.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPSigAlgorithm Property (XAdESSigner Component)

The public key algorithm that was used by the CA to sign this OCSP response.

Syntax

__property String OCSPSigAlgorithm[int OCSPIndex] = { read=FOCSPSigAlgorithm };

Default Value

"0"

Remarks

The public key algorithm that was used by the CA to sign this OCSP response.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

String

OCSPSource Property (XAdESSigner Component)

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Syntax

__property TsbxXAdESSignerOCSPSources OCSPSource[int OCSPIndex] = { read=FOCSPSource };

enum TsbxXAdESSignerOCSPSources {
  pksUnknown=0,
  pksSignature=1,
  pksDocument=2,
  pksUser=3,
  pksLocal=4,
  pksOnline=5
};

Default Value

pksUnknown

Remarks

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

The OCSPIndex parameter specifies the index of the item in the array. The size of the array is controlled by the OCSPCount property.

This property is read-only and not available at design time.

Data Type

Integer

OfflineMode Property (XAdESSigner Component)

Switches the component to offline mode.

Syntax

__property bool OfflineMode = { read=FOfflineMode, write=FSetOfflineMode };

Default Value

false

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

Data Type

Boolean

OutputBytes Property (XAdESSigner Component)

Use this property to read the output the component object has produced.

Syntax

__property DynamicArray OutputBytes = { read=FOutputBytes };

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Data Type

Byte Array

OutputFile Property (XAdESSigner Component)

Specifies the file where the signed document will be saved.

Syntax

__property String OutputFile = { read=FOutputFile, write=FSetOutputFile };

Default Value

""

Remarks

Provide the full path to the file where the signed document should be saved.

Data Type

String

Profile Property (XAdESSigner Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

__property String Profile = { read=FProfile, write=FSetProfile };

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile. 

Supported profiles:

"ES.Factura" profile equivalent to the following settings: using (XMLReference Ref = new XMLReference()) { Ref.ID = "Reference-1"; Ref.TargetXMLElement = ""; Ref.UseEnvelopedSignatureTransform = true; XAdESSigner.References.Add(Ref); } using (XMLReference Ref = new XMLReference()) { Ref.URI = "#KeyInfo-1"; XAdESSigner.References.Add(Ref); } XAdESSigner.NewSignature.XAdESVersion = XAdESVersions.xav132; XAdESSigner.NewSignature.Level = AdESSignatureLevels.aslEPES; XAdESSigner.Config("KeyInfoDetails=certificate"); XAdESSigner.Config("KeyInfoID=KeyInfo-1"); XAdESSigner.Config("ClaimedRoleText=emisor"); XAdESSigner.Config("SigPolicyId=http://www.facturae.es/politica_de_firma_formato_facturae/politica_de_firma_formato_facturae_v3_1.pdf"); XAdESSigner.Config("SigPolicyDescription=Pol" + "\u00ED" + "tica de Firma FacturaE v3.1"); XAdESSigner.Config("SigPolicyHash=3a18b197aba90fa6aff0dee912f0c006110bea13"); XAdESSigner.Config("SigPolicyHashAlgorithm=SHA1"); XAdESSigner.Config("DataObjectFormatObjectReference=#Reference-1"); XAdESSigner.Config("DataObjectFormatMimeType=text/xml"); XAdESSigner.Config("DataObjectFormatDescription=Factura electr" + "\u00F3" + "nica");

"XAdES.CounterSignature" profile allows to add XAdES countersignature to the existent XAdES-BES or EPES signature. Use XMLElement property to specify existent XAdES signature. Sample code: XAdESSigner.Profile = "XAdES.CounterSignature"; XAdESSigner.NewSignature.XAdES = false;

Data Type

String

ProxyAddress Property (XAdESSigner Component)

The IP address of the proxy server.

Syntax

__property String ProxyAddress = { read=FProxyAddress, write=FSetProxyAddress };

Default Value

""

Remarks

The IP address of the proxy server.

Data Type

String

ProxyAuthentication Property (XAdESSigner Component)

The authentication type used by the proxy server.

Syntax

__property TsbxXAdESSignerProxyAuthentications ProxyAuthentication = { read=FProxyAuthentication, write=FSetProxyAuthentication };

enum TsbxXAdESSignerProxyAuthentications {
  patNoAuthentication=0,
  patBasic=1,
  patDigest=2,
  patNTLM=3
};

Default Value

patNoAuthentication

Remarks

The authentication type used by the proxy server.

Data Type

Integer

ProxyPassword Property (XAdESSigner Component)

The password to authenticate to the proxy server.

Syntax

__property String ProxyPassword = { read=FProxyPassword, write=FSetProxyPassword };

Default Value

""

Remarks

The password to authenticate to the proxy server.

Data Type

String

ProxyPort Property (XAdESSigner Component)

The port on the proxy server to connect to.

Syntax

__property int ProxyPort = { read=FProxyPort, write=FSetProxyPort };

Default Value

0

Remarks

The port on the proxy server to connect to.

Data Type

Integer

ProxyProxyType Property (XAdESSigner Component)

The type of the proxy server.

Syntax

__property TsbxXAdESSignerProxyProxyTypes ProxyProxyType = { read=FProxyProxyType, write=FSetProxyProxyType };

enum TsbxXAdESSignerProxyProxyTypes {
  cptNone=0,
  cptSocks4=1,
  cptSocks5=2,
  cptWebTunnel=3,
  cptHTTP=4
};

Default Value

cptNone

Remarks

The type of the proxy server.

Data Type

Integer

ProxyRequestHeaders Property (XAdESSigner Component)

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

__property String ProxyRequestHeaders = { read=FProxyRequestHeaders, write=FSetProxyRequestHeaders };

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

Data Type

String

ProxyResponseBody Property (XAdESSigner Component)

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

__property String ProxyResponseBody = { read=FProxyResponseBody, write=FSetProxyResponseBody };

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Data Type

String

ProxyResponseHeaders Property (XAdESSigner Component)

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

__property String ProxyResponseHeaders = { read=FProxyResponseHeaders, write=FSetProxyResponseHeaders };

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Data Type

String

ProxyUseIPv6 Property (XAdESSigner Component)

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

__property bool ProxyUseIPv6 = { read=FProxyUseIPv6, write=FSetProxyUseIPv6 };

Default Value

false

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

Data Type

Boolean

ProxyUsername Property (XAdESSigner Component)

Specifies the username credential for proxy authentication.

Syntax

__property String ProxyUsername = { read=FProxyUsername, write=FSetProxyUsername };

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

Data Type

String

ReferenceCount Property (XAdESSigner Component)

The number of records in the Reference arrays.

Syntax

__property int ReferenceCount = { read=FReferenceCount, write=FSetReferenceCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• ReferenceAutoGenerateElementId
• ReferenceCanonicalizationMethod
• ReferenceCustomElementId
• ReferenceDataObjectDescription
• ReferenceDataObjectEncoding
• ReferenceDataObjectIdentifier
• ReferenceDataObjectMimeType
• ReferenceDigestValue
• ReferenceHandle
• ReferenceHasDataObjectFormat
• ReferenceHashAlgorithm
• ReferenceHasURI
• ReferenceID
• ReferenceInclusiveNamespacesPrefixList
• ReferenceReferenceType
• ReferenceTargetData
• ReferenceTargetType
• ReferenceTargetXMLElement
• ReferenceURI
• ReferenceUseBase64Transform
• ReferenceUseEnvelopedSignatureTransform
• ReferenceUseXPathFilter2Transform
• ReferenceUseXPathTransform
• ReferenceValidationResult
• ReferenceXPathExpression
• ReferenceXPathFilter2Expressions
• ReferenceXPathFilter2Filters
• ReferenceXPathFilter2PrefixList
• ReferenceXPathPrefixList

The array indices start at 0 and end at ReferenceCount - 1.

This property is not available at design time.

Data Type

Integer

ReferenceAutoGenerateElementId Property (XAdESSigner Component)

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing.

Syntax

__property bool ReferenceAutoGenerateElementId[int ReferenceIndex] = { read=FReferenceAutoGenerateElementId, write=FSetReferenceAutoGenerateElementId };

Default Value

false

Remarks

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceCanonicalizationMethod Property (XAdESSigner Component)

Use this property to specify the canonicalization method for the transform of the reference.

Syntax

__property TsbxXAdESSignerReferenceCanonicalizationMethods ReferenceCanonicalizationMethod[int ReferenceIndex] = { read=FReferenceCanonicalizationMethod, write=FSetReferenceCanonicalizationMethod };

enum TsbxXAdESSignerReferenceCanonicalizationMethods {
  cxcmNone=0,
  cxcmCanon=1,
  cxcmCanonComment=2,
  cxcmExclCanon=3,
  cxcmExclCanonComment=4,
  cxcmMinCanon=5,
  cxcmCanon_v1_1=6,
  cxcmCanonComment_v1_1=7
};

Default Value

cxcmNone

Remarks

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Integer

ReferenceCustomElementId Property (XAdESSigner Component)

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing.

Syntax

__property String ReferenceCustomElementId[int ReferenceIndex] = { read=FReferenceCustomElementId, write=FSetReferenceCustomElementId };

Default Value

""

Remarks

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceDataObjectDescription Property (XAdESSigner Component)

This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.

Syntax

__property String ReferenceDataObjectDescription[int ReferenceIndex] = { read=FReferenceDataObjectDescription, write=FSetReferenceDataObjectDescription };

Default Value

""

Remarks

This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceDataObjectEncoding Property (XAdESSigner Component)

This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.

Syntax

__property String ReferenceDataObjectEncoding[int ReferenceIndex] = { read=FReferenceDataObjectEncoding, write=FSetReferenceDataObjectEncoding };

Default Value

""

Remarks

This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceDataObjectIdentifier Property (XAdESSigner Component)

This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.

Syntax

__property String ReferenceDataObjectIdentifier[int ReferenceIndex] = { read=FReferenceDataObjectIdentifier, write=FSetReferenceDataObjectIdentifier };

Default Value

""

Remarks

This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceDataObjectMimeType Property (XAdESSigner Component)

This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.

Syntax

__property String ReferenceDataObjectMimeType[int ReferenceIndex] = { read=FReferenceDataObjectMimeType, write=FSetReferenceDataObjectMimeType };

Default Value

""

Remarks

This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceDigestValue Property (XAdESSigner Component)

Use this property to get or set the value of the digest calculated over the referenced data.

Syntax

__property DynamicArray ReferenceDigestValue[int ReferenceIndex] = { read=FReferenceDigestValue, write=FSetReferenceDigestValue };

Remarks

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Byte Array

ReferenceHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 ReferenceHandle[int ReferenceIndex] = { read=FReferenceHandle, write=FSetReferenceHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Long64

ReferenceHasDataObjectFormat Property (XAdESSigner Component)

Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.

Syntax

__property bool ReferenceHasDataObjectFormat[int ReferenceIndex] = { read=FReferenceHasDataObjectFormat, write=FSetReferenceHasDataObjectFormat };

Default Value

false

Remarks

Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.

Check this property to find out if the reference has an associated DataObjectFormat element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceHashAlgorithm Property (XAdESSigner Component)

Specifies the hash algorithm to be used.

Syntax

__property String ReferenceHashAlgorithm[int ReferenceIndex] = { read=FReferenceHashAlgorithm, write=FSetReferenceHashAlgorithm };

Default Value

"SHA256"

Remarks

Specifies the hash algorithm to be used.

Supported values:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceHasURI Property (XAdESSigner Component)

Specifies whether the URI is set (even when it is empty).

Syntax

__property bool ReferenceHasURI[int ReferenceIndex] = { read=FReferenceHasURI, write=FSetReferenceHasURI };

Default Value

true

Remarks

Specifies whether the URI is set (even when it is empty).

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceID Property (XAdESSigner Component)

A user-defined identifier (ID) attribute of this Reference element.

Syntax

__property String ReferenceID[int ReferenceIndex] = { read=FReferenceID, write=FSetReferenceID };

Default Value

""

Remarks

A user-defined identifier (ID) attribute of this Reference element.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceInclusiveNamespacesPrefixList Property (XAdESSigner Component)

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference.

Syntax

__property String ReferenceInclusiveNamespacesPrefixList[int ReferenceIndex] = { read=FReferenceInclusiveNamespacesPrefixList, write=FSetReferenceInclusiveNamespacesPrefixList };

Default Value

""

Remarks

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceReferenceType Property (XAdESSigner Component)

The Reference's type attribute as defined in XMLDSIG specification.

Syntax

__property String ReferenceReferenceType[int ReferenceIndex] = { read=FReferenceReferenceType, write=FSetReferenceReferenceType };

Default Value

""

Remarks

The Reference's type attribute as defined in XMLDSIG specification.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceTargetData Property (XAdESSigner Component)

Contains the referenced external data when the digest value is not explicitly specified.

Syntax

__property DynamicArray ReferenceTargetData[int ReferenceIndex] = { read=FReferenceTargetData, write=FSetReferenceTargetData };

Remarks

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Byte Array

ReferenceTargetType Property (XAdESSigner Component)

The reference's target type to use.

Syntax

__property TsbxXAdESSignerReferenceTargetTypes ReferenceTargetType[int ReferenceIndex] = { read=FReferenceTargetType, write=FSetReferenceTargetType };

enum TsbxXAdESSignerReferenceTargetTypes {
  rttAuto=0,
  rttXMLElement=1,
  rttData=2,
  rttURI=3
};

Default Value

rttAuto

Remarks

The reference's target type to use.

Use this property to specify the reference's target type to use when forming the signature.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Integer

ReferenceTargetXMLElement Property (XAdESSigner Component)

This property specifies the referenced XML element.

Syntax

__property String ReferenceTargetXMLElement[int ReferenceIndex] = { read=FReferenceTargetXMLElement, write=FSetReferenceTargetXMLElement };

Default Value

""

Remarks

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceURI Property (XAdESSigner Component)

Use this property to get or set the URL which references the data.

Syntax

__property String ReferenceURI[int ReferenceIndex] = { read=FReferenceURI, write=FSetReferenceURI };

Default Value

""

Remarks

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceUseBase64Transform Property (XAdESSigner Component)

Specifies whether Base64 transform is included in transform chain.

Syntax

__property bool ReferenceUseBase64Transform[int ReferenceIndex] = { read=FReferenceUseBase64Transform, write=FSetReferenceUseBase64Transform };

Default Value

false

Remarks

Specifies whether Base64 transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceUseEnvelopedSignatureTransform Property (XAdESSigner Component)

Specifies whether enveloped signature transform is included in transform chain.

Syntax

__property bool ReferenceUseEnvelopedSignatureTransform[int ReferenceIndex] = { read=FReferenceUseEnvelopedSignatureTransform, write=FSetReferenceUseEnvelopedSignatureTransform };

Default Value

false

Remarks

Specifies whether enveloped signature transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceUseXPathFilter2Transform Property (XAdESSigner Component)

Specifies whether XPath Filter 2.

Syntax

__property bool ReferenceUseXPathFilter2Transform[int ReferenceIndex] = { read=FReferenceUseXPathFilter2Transform, write=FSetReferenceUseXPathFilter2Transform };

Default Value

false

Remarks

Specifies whether XPath Filter 2.0 transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceUseXPathTransform Property (XAdESSigner Component)

Specifies whether XPath transform is included in transform chain.

Syntax

__property bool ReferenceUseXPathTransform[int ReferenceIndex] = { read=FReferenceUseXPathTransform, write=FSetReferenceUseXPathTransform };

Default Value

false

Remarks

Specifies whether XPath transform is included in transform chain.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

Boolean

ReferenceValidationResult Property (XAdESSigner Component)

The outcome of the cryptographic reference validation.

Syntax

__property bool ReferenceValidationResult[int ReferenceIndex] = { read=FReferenceValidationResult };

Default Value

false

Remarks

The outcome of the cryptographic reference validation.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is read-only and not available at design time.

Data Type

Boolean

ReferenceXPathExpression Property (XAdESSigner Component)

Use this property to specify XPath expression for XPath transform of the reference.

Syntax

__property String ReferenceXPathExpression[int ReferenceIndex] = { read=FReferenceXPathExpression, write=FSetReferenceXPathExpression };

Default Value

""

Remarks

Use this property to specify XPath expression for XPath transform of the reference.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceXPathFilter2Expressions Property (XAdESSigner Component)

Use this property to specify XPointer expression(s) for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2Expressions[int ReferenceIndex] = { read=FReferenceXPathFilter2Expressions, write=FSetReferenceXPathFilter2Expressions };

Default Value

""

Remarks

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceXPathFilter2Filters Property (XAdESSigner Component)

Use this property to specify XPointer filter(s) for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2Filters[int ReferenceIndex] = { read=FReferenceXPathFilter2Filters, write=FSetReferenceXPathFilter2Filters };

Default Value

""

Remarks

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceXPathFilter2PrefixList Property (XAdESSigner Component)

Use this property to specify a prefix list for XPath Filter 2.

Syntax

__property String ReferenceXPathFilter2PrefixList[int ReferenceIndex] = { read=FReferenceXPathFilter2PrefixList, write=FSetReferenceXPathFilter2PrefixList };

Default Value

""

Remarks

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

ReferenceXPathPrefixList Property (XAdESSigner Component)

Use this property to specify a prefix list for XPath transform of the reference.

Syntax

__property String ReferenceXPathPrefixList[int ReferenceIndex] = { read=FReferenceXPathPrefixList, write=FSetReferenceXPathPrefixList };

Default Value

""

Remarks

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The ReferenceIndex parameter specifies the index of the item in the array. The size of the array is controlled by the ReferenceCount property.

This property is not available at design time.

Data Type

String

RevocationCheck Property (XAdESSigner Component)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

__property TsbxXAdESSignerRevocationChecks RevocationCheck = { read=FRevocationCheck, write=FSetRevocationCheck };

enum TsbxXAdESSignerRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Data Type

Integer

SignatureCount Property (XAdESSigner Component)

The number of records in the Signature arrays.

Syntax

__property int SignatureCount = { read=FSignatureCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SignatureCanonicalizationMethod
• SignatureChainValidationDetails
• SignatureChainValidationResult
• SignatureClaimedSigningTime
• SignatureCompatibilityErrors
• SignatureContainsLongTermInfo
• SignatureEntityLabel
• SignatureHandle
• SignatureHashAlgorithm
• SignatureIssuerRDN
• SignatureLastArchivalTime
• SignatureLevel
• SignatureParentEntity
• SignaturePolicyHash
• SignaturePolicyHashAlgorithm
• SignaturePolicyID
• SignaturePolicyURI
• SignatureSerialNumber
• SignatureSignatureBytes
• SignatureSignatureType
• SignatureSignatureValidationResult
• SignatureSubjectKeyID
• SignatureSubjectRDN
• SignatureTimestamped
• SignatureValidatedSigningTime
• SignatureValidationLog
• SignatureXAdESVersion
• SignatureXMLElement

The array indices start at 0 and end at SignatureCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

SignatureCanonicalizationMethod Property (XAdESSigner Component)

The XML canonicalization method that was used for signing.

Syntax

__property TsbxXAdESSignerSignatureCanonicalizationMethods SignatureCanonicalizationMethod[int SignatureIndex] = { read=FSignatureCanonicalizationMethod };

enum TsbxXAdESSignerSignatureCanonicalizationMethods {
  cxcmNone=0,
  cxcmCanon=1,
  cxcmCanonComment=2,
  cxcmExclCanon=3,
  cxcmExclCanonComment=4,
  cxcmMinCanon=5,
  cxcmCanon_v1_1=6,
  cxcmCanonComment_v1_1=7
};

Default Value

cxcmNone

Remarks

The XML canonicalization method that was used for signing.

Supported canonicalization methods:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationDetails Property (XAdESSigner Component)

The details of a certificate chain validation outcome.

Syntax

__property int SignatureChainValidationDetails[int SignatureIndex] = { read=FSignatureChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureChainValidationResult Property (XAdESSigner Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxXAdESSignerSignatureChainValidationResults SignatureChainValidationResult[int SignatureIndex] = { read=FSignatureChainValidationResult };

enum TsbxXAdESSignerSignatureChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureClaimedSigningTime Property (XAdESSigner Component)

The signing time from the signer's computer.

Syntax

__property String SignatureClaimedSigningTime[int SignatureIndex] = { read=FSignatureClaimedSigningTime };

Default Value

""

Remarks

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureCompatibilityErrors Property (XAdESSigner Component)

Returns compatibility errors encountered during validation.

Syntax

__property int SignatureCompatibilityErrors[int SignatureIndex] = { read=FSignatureCompatibilityErrors };

Default Value

0

Remarks

Returns compatibility errors encountered during validation.

Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.

Supported values:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureContainsLongTermInfo Property (XAdESSigner Component)

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

Syntax

__property bool SignatureContainsLongTermInfo[int SignatureIndex] = { read=FSignatureContainsLongTermInfo };

Default Value

false

Remarks

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureEntityLabel Property (XAdESSigner Component)

Use this property to get the signature entity label.

Syntax

__property String SignatureEntityLabel[int SignatureIndex] = { read=FSignatureEntityLabel };

Default Value

""

Remarks

Use this property to get the signature entity label.

This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SignatureHandle[int SignatureIndex] = { read=FSignatureHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Long64

SignatureHashAlgorithm Property (XAdESSigner Component)

The hash algorithm used for signing.

Syntax

__property String SignatureHashAlgorithm[int SignatureIndex] = { read=FSignatureHashAlgorithm };

Default Value

"Unknown"

Remarks

The hash algorithm used for signing.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureIssuerRDN Property (XAdESSigner Component)

The Relative Distinguished Name of the signing certificate's issuer.

Syntax

__property String SignatureIssuerRDN[int SignatureIndex] = { read=FSignatureIssuerRDN };

Default Value

""

Remarks

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureLastArchivalTime Property (XAdESSigner Component)

Indicates the most recent archival time of an archived signature This property returns the time of the most recent archival timestamp applied to the signature.

Syntax

__property String SignatureLastArchivalTime[int SignatureIndex] = { read=FSignatureLastArchivalTime };

Default Value

""

Remarks

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureLevel Property (XAdESSigner Component)

Specifies which level or form of XAdES should be produced.

Syntax

__property TsbxXAdESSignerSignatureLevels SignatureLevel[int SignatureIndex] = { read=FSignatureLevel };

enum TsbxXAdESSignerSignatureLevels {
  aslUnknown=0,
  aslGeneric=1,
  aslBaselineB=2,
  aslBaselineT=3,
  aslBaselineLT=4,
  aslBaselineLTA=5,
  aslBES=6,
  aslEPES=7,
  aslT=8,
  aslC=9,
  aslX=10,
  aslXType1=11,
  aslXType2=12,
  aslXL=13,
  aslXLType1=14,
  aslXLType2=15,
  aslA=16,
  aslExtendedBES=17,
  aslExtendedEPES=18,
  aslExtendedT=19,
  aslExtendedC=20,
  aslExtendedX=21,
  aslExtendedXType1=22,
  aslExtendedXType2=23,
  aslExtendedXLong=24,
  aslExtendedXL=25,
  aslExtendedXLType1=26,
  aslExtendedXLType2=27,
  aslExtendedA=28
};

Default Value

aslBaselineB

Remarks

Specifies which level or form of XAdES should be produced.

Use this property to specify the level or form of advanced electronic signature to be produced.

Use the Generic value to produce XML-DSIG signature.

The supported levels and forms are:

* For XAdES form from XAdES v1.1.1 use either BES or EPES form values ** Extended forms are supported starting from XAdES v1.3.2

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureParentEntity Property (XAdESSigner Component)

Use this property to get the parent signature label.

Syntax

__property String SignatureParentEntity[int SignatureIndex] = { read=FSignatureParentEntity };

Default Value

""

Remarks

Use this property to get the parent signature label.

This property contains the unique entity label of the current signature's parent object - typically a higher-level signature or a timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHash Property (XAdESSigner Component)

The signature policy hash value.

Syntax

__property String SignaturePolicyHash[int SignatureIndex] = { read=FSignaturePolicyHash };

Default Value

""

Remarks

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyHashAlgorithm Property (XAdESSigner Component)

The algorithm that was used to calculate the signature policy hash Use this property to get or set the hash algorithm used to calculate the signature policy hash.

Syntax

__property String SignaturePolicyHashAlgorithm[int SignatureIndex] = { read=FSignaturePolicyHashAlgorithm };

Default Value

""

Remarks

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from SignaturePolicyHash.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyID Property (XAdESSigner Component)

The policy ID that was included or to be included into the signature.

Syntax

__property String SignaturePolicyID[int SignatureIndex] = { read=FSignaturePolicyID };

Default Value

""

Remarks

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignaturePolicyURI Property (XAdESSigner Component)

The signature policy URI that was included in the signature.

Syntax

__property String SignaturePolicyURI[int SignatureIndex] = { read=FSignaturePolicyURI };

Default Value

""

Remarks

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureSerialNumber Property (XAdESSigner Component)

The serial number of the signing certificate.

Syntax

__property DynamicArray SignatureSerialNumber[int SignatureIndex] = { read=FSignatureSerialNumber };

Remarks

The serial number of the signing certificate.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureBytes Property (XAdESSigner Component)

Returns the binary representation of the XML-DSig/XAdES signature.

Syntax

__property DynamicArray SignatureSignatureBytes[int SignatureIndex] = { read=FSignatureSignatureBytes };

Remarks

Returns the binary representation of the XML-DSig/XAdES signature.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSignatureType Property (XAdESSigner Component)

The signature type to employ when signing the document.

Syntax

__property TsbxXAdESSignerSignatureSignatureTypes SignatureSignatureType[int SignatureIndex] = { read=FSignatureSignatureType };

enum TsbxXAdESSignerSignatureSignatureTypes {
  cxstDetached=1,
  cxstEnveloping=2,
  cxstEnveloped=4
};

Default Value

cxstEnveloped

Remarks

The signature type to employ when signing the document.

This property specifies the signature type to be used when signing the document.

Supported values:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSignatureValidationResult Property (XAdESSigner Component)

The outcome of the cryptographic signature validation.

Syntax

__property TsbxXAdESSignerSignatureSignatureValidationResults SignatureSignatureValidationResult[int SignatureIndex] = { read=FSignatureSignatureValidationResult };

enum TsbxXAdESSignerSignatureSignatureValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4,
  svtReferenceCorrupted=5
};

Default Value

svtValid

Remarks

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureSubjectKeyID Property (XAdESSigner Component)

Contains the subject key identifier of the signing certificate.

Syntax

__property DynamicArray SignatureSubjectKeyID[int SignatureIndex] = { read=FSignatureSubjectKeyID };

Remarks

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SignatureSubjectRDN Property (XAdESSigner Component)

Contains information about the person owning the signing certificate.

Syntax

__property String SignatureSubjectRDN[int SignatureIndex] = { read=FSignatureSubjectRDN };

Default Value

""

Remarks

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureTimestamped Property (XAdESSigner Component)

Use this property to establish whether the signature contains an embedded timestamp.

Syntax

__property bool SignatureTimestamped[int SignatureIndex] = { read=FSignatureTimestamped };

Default Value

false

Remarks

Use this property to establish whether the signature contains an embedded timestamp.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Boolean

SignatureValidatedSigningTime Property (XAdESSigner Component)

Contains the certified signing time.

Syntax

__property String SignatureValidatedSigningTime[int SignatureIndex] = { read=FSignatureValidatedSigningTime };

Default Value

""

Remarks

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

SignatureClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureValidationLog Property (XAdESSigner Component)

Contains the complete log of the certificate validation routine.

Syntax

__property String SignatureValidationLog[int SignatureIndex] = { read=FSignatureValidationLog };

Default Value

""

Remarks

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SignatureXAdESVersion Property (XAdESSigner Component)

Specifies XAdES version.

Syntax

__property TsbxXAdESSignerSignatureXAdESVersions SignatureXAdESVersion[int SignatureIndex] = { read=FSignatureXAdESVersion };

enum TsbxXAdESSignerSignatureXAdESVersions {
  xavUnknown=0,
  xav111=1,
  xav122=2,
  xav132=3,
  xav141=4
};

Default Value

xav132

Remarks

Specifies XAdES version.

This property specifies the version of the XAdES specification the signature should comply with.

The supported vesions are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

Integer

SignatureXMLElement Property (XAdESSigner Component)

Specifies the XML element where to save the signature or containing the signature.

Syntax

__property String SignatureXMLElement[int SignatureIndex] = { read=FSignatureXMLElement };

Default Value

""

Remarks

Specifies the XML element where to save the signature or containing the signature.

This property specifies the XML element where to save the electronic signature or that contains the signature to be validated.

Supported values are:

The SignatureIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SignatureCount property.

This property is read-only and not available at design time.

Data Type

String

SigningCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray SigningCertBytes = { read=FSigningCertBytes };

Remarks

Returns the raw certificate data in DER format.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SigningCertHandle = { read=FSigningCertHandle, write=FSetSigningCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

This property is not available at design time.

Data Type

Long64

SigningChainCount Property (XAdESSigner Component)

The number of records in the SigningChain arrays.

Syntax

__property int SigningChainCount = { read=FSigningChainCount, write=FSetSigningChainCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• SigningChainBytes
• SigningChainHandle

The array indices start at 0 and end at SigningChainCount - 1.

This property is not available at design time.

Data Type

Integer

SigningChainBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray SigningChainBytes[int SigningChainIndex] = { read=FSigningChainBytes };

Remarks

Returns the raw certificate data in DER format.

The SigningChainIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SigningChainCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

SigningChainHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 SigningChainHandle[int SigningChainIndex] = { read=FSigningChainHandle, write=FSetSigningChainHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The SigningChainIndex parameter specifies the index of the item in the array. The size of the array is controlled by the SigningChainCount property.

This property is not available at design time.

Data Type

Long64

SocketDNSMode Property (XAdESSigner Component)

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Syntax

__property TsbxXAdESSignerSocketDNSModes SocketDNSMode = { read=FSocketDNSMode, write=FSetSocketDNSMode };

enum TsbxXAdESSignerSocketDNSModes {
  dmAuto=0,
  dmPlatform=1,
  dmOwn=2,
  dmOwnSecure=3
};

Default Value

dmAuto

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

Data Type

Integer

SocketDNSPort Property (XAdESSigner Component)

Specifies the port number to be used for sending queries to the DNS server.

Syntax

__property int SocketDNSPort = { read=FSocketDNSPort, write=FSetSocketDNSPort };

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

Data Type

Integer

SocketDNSQueryTimeout Property (XAdESSigner Component)

The timeout (in milliseconds) for each DNS query.

Syntax

__property int SocketDNSQueryTimeout = { read=FSocketDNSQueryTimeout, write=FSetSocketDNSQueryTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketDNSServers Property (XAdESSigner Component)

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

__property String SocketDNSServers = { read=FSocketDNSServers, write=FSetSocketDNSServers };

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Data Type

String

SocketDNSTotalTimeout Property (XAdESSigner Component)

The timeout (in milliseconds) for the whole resolution process.

Syntax

__property int SocketDNSTotalTimeout = { read=FSocketDNSTotalTimeout, write=FSetSocketDNSTotalTimeout };

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

Data Type

Integer

SocketIncomingSpeedLimit Property (XAdESSigner Component)

The maximum number of bytes to read from the socket, per second.

Syntax

__property int SocketIncomingSpeedLimit = { read=FSocketIncomingSpeedLimit, write=FSetSocketIncomingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

Data Type

Integer

SocketLocalAddress Property (XAdESSigner Component)

The local network interface to bind the socket to.

Syntax

__property String SocketLocalAddress = { read=FSocketLocalAddress, write=FSetSocketLocalAddress };

Default Value

""

Remarks

The local network interface to bind the socket to.

Data Type

String

SocketLocalPort Property (XAdESSigner Component)

The local port number to bind the socket to.

Syntax

__property int SocketLocalPort = { read=FSocketLocalPort, write=FSetSocketLocalPort };

Default Value

0

Remarks

The local port number to bind the socket to.

Data Type

Integer

SocketOutgoingSpeedLimit Property (XAdESSigner Component)

The maximum number of bytes to write to the socket, per second.

Syntax

__property int SocketOutgoingSpeedLimit = { read=FSocketOutgoingSpeedLimit, write=FSetSocketOutgoingSpeedLimit };

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

Data Type

Integer

SocketTimeout Property (XAdESSigner Component)

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

__property int SocketTimeout = { read=FSocketTimeout, write=FSetSocketTimeout };

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

Data Type

Integer

SocketUseIPv6 Property (XAdESSigner Component)

Enables or disables IP protocol version 6.

Syntax

__property bool SocketUseIPv6 = { read=FSocketUseIPv6, write=FSetSocketUseIPv6 };

Default Value

false

Remarks

Enables or disables IP protocol version 6.

Data Type

Boolean

TimestampCount Property (XAdESSigner Component)

The number of records in the Timestamp arrays.

Syntax

__property int TimestampCount = { read=FTimestampCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TimestampAccuracy
• TimestampBytes
• TimestampCertificateIndex
• TimestampChainValidationDetails
• TimestampChainValidationResult
• TimestampContainsLongTermInfo
• TimestampEntityLabel
• TimestampHashAlgorithm
• TimestampParentEntity
• TimestampSerialNumber
• TimestampTime
• TimestampTimestampType
• TimestampTSAName
• TimestampValidationLog
• TimestampValidationResult

The array indices start at 0 and end at TimestampCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TimestampAccuracy Property (XAdESSigner Component)

This property indicates the accuracy of the included time mark, in microseconds.

Syntax

__property __int64 TimestampAccuracy[int TimestampIndex] = { read=FTimestampAccuracy };

Default Value

0

Remarks

This field indicates the accuracy of the included time mark, in microseconds.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Long64

TimestampBytes Property (XAdESSigner Component)

Returns the raw timestamp data in DER format.

Syntax

__property DynamicArray TimestampBytes[int TimestampIndex] = { read=FTimestampBytes };

Remarks

Returns the raw timestamp data in DER format.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampCertificateIndex Property (XAdESSigner Component)

Returns the index of the TSA certificate in the Certificates collection.

Syntax

__property int TimestampCertificateIndex[int TimestampIndex] = { read=FTimestampCertificateIndex };

Default Value

-1

Remarks

Returns the index of the TSA certificate in the Certificates collection.

Use this property to look up the TSA certificate in the Certificates collection.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationDetails Property (XAdESSigner Component)

The details of a certificate chain validation outcome.

Syntax

__property int TimestampChainValidationDetails[int TimestampIndex] = { read=FTimestampChainValidationDetails };

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampChainValidationResult Property (XAdESSigner Component)

The outcome of a certificate chain validation routine.

Syntax

__property TsbxXAdESSignerTimestampChainValidationResults TimestampChainValidationResult[int TimestampIndex] = { read=FTimestampChainValidationResult };

enum TsbxXAdESSignerTimestampChainValidationResults {
  cvtValid=0,
  cvtValidButUntrusted=1,
  cvtInvalid=2,
  cvtCantBeEstablished=3
};

Default Value

cvtValid

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampContainsLongTermInfo Property (XAdESSigner Component)

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

Syntax

__property bool TimestampContainsLongTermInfo[int TimestampIndex] = { read=FTimestampContainsLongTermInfo };

Default Value

false

Remarks

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Boolean

TimestampEntityLabel Property (XAdESSigner Component)

Use this property to get the timestamp entity label.

Syntax

__property String TimestampEntityLabel[int TimestampIndex] = { read=FTimestampEntityLabel };

Default Value

""

Remarks

Use this property to get the timestamp entity label.

This property returns a string label that uniquely identifies the timestamp. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampHashAlgorithm Property (XAdESSigner Component)

Returns the timestamp's hash algorithm.

Syntax

__property String TimestampHashAlgorithm[int TimestampIndex] = { read=FTimestampHashAlgorithm };

Default Value

""

Remarks

Returns the timestamp's hash algorithm.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampParentEntity Property (XAdESSigner Component)

Use this property to get the label of the timestamp's parent entity.

Syntax

__property String TimestampParentEntity[int TimestampIndex] = { read=FTimestampParentEntity };

Default Value

""

Remarks

Use this property to get the label of the timestamp's parent entity.

This property references the EntityLabel of the object that the timestamp covers, typically a signature.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampSerialNumber Property (XAdESSigner Component)

Returns the timestamp's serial number.

Syntax

__property DynamicArray TimestampSerialNumber[int TimestampIndex] = { read=FTimestampSerialNumber };

Remarks

Returns the timestamp's serial number.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TimestampTime Property (XAdESSigner Component)

The time point incorporated into the timestamp.

Syntax

__property String TimestampTime[int TimestampIndex] = { read=FTimestampTime };

Default Value

""

Remarks

The time point incorporated into the timestamp.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampTimestampType Property (XAdESSigner Component)

Returns the type of the timestamp.

Syntax

__property int TimestampTimestampType[int TimestampIndex] = { read=FTimestampTimestampType };

Default Value

0

Remarks

Returns the type of the timestamp.

Available options:

Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampTSAName Property (XAdESSigner Component)

This value uniquely identifies the Timestamp Authority (TSA).

Syntax

__property String TimestampTSAName[int TimestampIndex] = { read=FTimestampTSAName };

Default Value

""

Remarks

This value uniquely identifies the Timestamp Authority (TSA).

This property provides information about the entity that manages the TSA.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationLog Property (XAdESSigner Component)

Contains the TSA certificate chain validation log.

Syntax

__property String TimestampValidationLog[int TimestampIndex] = { read=FTimestampValidationLog };

Default Value

""

Remarks

Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

String

TimestampValidationResult Property (XAdESSigner Component)

Contains the timestamp validation outcome.

Syntax

__property TsbxXAdESSignerTimestampValidationResults TimestampValidationResult[int TimestampIndex] = { read=FTimestampValidationResult };

enum TsbxXAdESSignerTimestampValidationResults {
  svtValid=0,
  svtUnknown=1,
  svtCorrupted=2,
  svtSignerNotFound=3,
  svtFailure=4,
  svtReferenceCorrupted=5
};

Default Value

svtValid

Remarks

Contains the timestamp validation outcome.

Use this property to check the result of the most recent timestamp validation.

The TimestampIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TimestampCount property.

This property is read-only and not available at design time.

Data Type

Integer

TimestampServer Property (XAdESSigner Component)

The address of the timestamping server.

Syntax

__property String TimestampServer = { read=FTimestampServer, write=FSetTimestampServer };

Default Value

""

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256&ignorenonce=true

Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

The ignorenonce parameter allows you to switch off client nonce verification to enable compatibility with TSA services that do not support nonce mirroring.

All the parameters are optional.

Data Type

String

TLSClientCertCount Property (XAdESSigner Component)

The number of records in the TLSClientCert arrays.

Syntax

__property int TLSClientCertCount = { read=FTLSClientCertCount, write=FSetTLSClientCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSClientCertBytes
• TLSClientCertHandle

The array indices start at 0 and end at TLSClientCertCount - 1.

This property is not available at design time.

Data Type

Integer

TLSClientCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSClientCertBytes[int TLSClientCertIndex] = { read=FTLSClientCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSClientCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSClientCertHandle[int TLSClientCertIndex] = { read=FTLSClientCertHandle, write=FSetTLSClientCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSClientCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSClientCertCount property.

This property is not available at design time.

Data Type

Long64

TLSServerCertCount Property (XAdESSigner Component)

The number of records in the TLSServerCert arrays.

Syntax

__property int TLSServerCertCount = { read=FTLSServerCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TLSServerCertBytes
• TLSServerCertFingerprint
• TLSServerCertHandle
• TLSServerCertIssuer
• TLSServerCertIssuerRDN
• TLSServerCertKeyAlgorithm
• TLSServerCertKeyBits
• TLSServerCertKeyUsage
• TLSServerCertSelfSigned
• TLSServerCertSerialNumber
• TLSServerCertSigAlgorithm
• TLSServerCertSubject
• TLSServerCertSubjectRDN
• TLSServerCertValidFrom
• TLSServerCertValidTo

The array indices start at 0 and end at TLSServerCertCount - 1.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TLSServerCertBytes[int TLSServerCertIndex] = { read=FTLSServerCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertFingerprint Property (XAdESSigner Component)

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

__property String TLSServerCertFingerprint[int TLSServerCertIndex] = { read=FTLSServerCertFingerprint };

Default Value

""

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TLSServerCertHandle[int TLSServerCertIndex] = { read=FTLSServerCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Long64

TLSServerCertIssuer Property (XAdESSigner Component)

The common name of the certificate issuer (CA), typically a company name.

Syntax

__property String TLSServerCertIssuer[int TLSServerCertIndex] = { read=FTLSServerCertIssuer };

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via TLSIssuerRDN.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertIssuerRDN Property (XAdESSigner Component)

A list of Property=Value pairs that uniquely identify the certificate issuer.

Syntax

__property String TLSServerCertIssuerRDN[int TLSServerCertIndex] = { read=FTLSServerCertIssuerRDN };

Default Value

""

Remarks

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertKeyAlgorithm Property (XAdESSigner Component)

Specifies the public key algorithm of this certificate.

Syntax

__property String TLSServerCertKeyAlgorithm[int TLSServerCertIndex] = { read=FTLSServerCertKeyAlgorithm };

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

Use the TLSKeyBits, TLSCurve, and TLSPublicKeyBytes properties to get more details about the key the certificate contains.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertKeyBits Property (XAdESSigner Component)

Returns the length of the public key in bits.

Syntax

__property int TLSServerCertKeyBits[int TLSServerCertIndex] = { read=FTLSServerCertKeyBits };

Default Value

0

Remarks

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the TLSPublicKeyBytes or TLSPrivateKeyBytes property would typically contain auxiliary values, and therefore be longer.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertKeyUsage Property (XAdESSigner Component)

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

__property int TLSServerCertKeyUsage[int TLSServerCertIndex] = { read=FTLSServerCertKeyUsage };

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Integer

TLSServerCertSelfSigned Property (XAdESSigner Component)

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

__property bool TLSServerCertSelfSigned[int TLSServerCertIndex] = { read=FTLSServerCertSelfSigned };

Default Value

false

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Boolean

TLSServerCertSerialNumber Property (XAdESSigner Component)

Returns the certificate's serial number.

Syntax

__property DynamicArray TLSServerCertSerialNumber[int TLSServerCertIndex] = { read=FTLSServerCertSerialNumber };

Remarks

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TLSServerCertSigAlgorithm Property (XAdESSigner Component)

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

__property String TLSServerCertSigAlgorithm[int TLSServerCertIndex] = { read=FTLSServerCertSigAlgorithm };

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertSubject Property (XAdESSigner Component)

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

__property String TLSServerCertSubject[int TLSServerCertIndex] = { read=FTLSServerCertSubject };

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via TLSSubjectRDN.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertSubjectRDN Property (XAdESSigner Component)

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Syntax

__property String TLSServerCertSubjectRDN[int TLSServerCertIndex] = { read=FTLSServerCertSubjectRDN };

Default Value

""

Remarks

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertValidFrom Property (XAdESSigner Component)

The time point at which the certificate becomes valid, in UTC.

Syntax

__property String TLSServerCertValidFrom[int TLSServerCertIndex] = { read=FTLSServerCertValidFrom };

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSServerCertValidTo Property (XAdESSigner Component)

The time point at which the certificate expires, in UTC.

Syntax

__property String TLSServerCertValidTo[int TLSServerCertIndex] = { read=FTLSServerCertValidTo };

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The TLSServerCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TLSServerCertCount property.

This property is read-only and not available at design time.

Data Type

String

TLSAutoValidateCertificates Property (XAdESSigner Component)

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

__property bool TLSAutoValidateCertificates = { read=FTLSAutoValidateCertificates, write=FSetTLSAutoValidateCertificates };

Default Value

true

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Data Type

Boolean

TLSBaseConfiguration Property (XAdESSigner Component)

Selects the base configuration for the TLS settings.

Syntax

__property TsbxXAdESSignerTLSBaseConfigurations TLSBaseConfiguration = { read=FTLSBaseConfiguration, write=FSetTLSBaseConfiguration };

enum TsbxXAdESSignerTLSBaseConfigurations {
  stpcDefault=0,
  stpcCompatible=1,
  stpcComprehensiveInsecure=2,
  stpcHighlySecure=3
};

Default Value

stpcDefault

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

Data Type

Integer

TLSCiphersuites Property (XAdESSigner Component)

A list of ciphersuites separated with commas or semicolons.

Syntax

__property String TLSCiphersuites = { read=FTLSCiphersuites, write=FSetTLSCiphersuites };

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by TLSBaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

Data Type

String

TLSClientAuth Property (XAdESSigner Component)

Enables or disables certificate-based client authentication.

Syntax

__property TsbxXAdESSignerTLSClientAuths TLSClientAuth = { read=FTLSClientAuth, write=FSetTLSClientAuth };

enum TsbxXAdESSignerTLSClientAuths {
  ccatNoAuth=0,
  ccatRequestCert=1,
  ccatRequireCert=2
};

Default Value

ccatNoAuth

Remarks

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:

Data Type

Integer

TLSECCurves Property (XAdESSigner Component)

Defines the elliptic curves to enable.

Syntax

__property String TLSECCurves = { read=FTLSECCurves, write=FSetTLSECCurves };

Default Value

""

Remarks

Defines the elliptic curves to enable.

Data Type

String

TLSExtensions Property (XAdESSigner Component)

Provides access to TLS extensions.

Syntax

__property String TLSExtensions = { read=FTLSExtensions, write=FSetTLSExtensions };

Default Value

""

Remarks

Provides access to TLS extensions.

Data Type

String

TLSForceResumeIfDestinationChanges Property (XAdESSigner Component)

Whether to force TLS session resumption when the destination address changes.

Syntax

__property bool TLSForceResumeIfDestinationChanges = { read=FTLSForceResumeIfDestinationChanges, write=FSetTLSForceResumeIfDestinationChanges };

Default Value

false

Remarks

Whether to force TLS session resumption when the destination address changes.

Data Type

Boolean

TLSPreSharedIdentity Property (XAdESSigner Component)

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

__property String TLSPreSharedIdentity = { read=FTLSPreSharedIdentity, write=FSetTLSPreSharedIdentity };

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is not available at design time.

Data Type

String

TLSPreSharedKey Property (XAdESSigner Component)

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

__property String TLSPreSharedKey = { read=FTLSPreSharedKey, write=FSetTLSPreSharedKey };

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

This property is not available at design time.

Data Type

String

TLSPreSharedKeyCiphersuite Property (XAdESSigner Component)

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

__property String TLSPreSharedKeyCiphersuite = { read=FTLSPreSharedKeyCiphersuite, write=FSetTLSPreSharedKeyCiphersuite };

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Data Type

String

TLSRenegotiationAttackPreventionMode Property (XAdESSigner Component)

Selects the renegotiation attack prevention mechanism.

Syntax

__property TsbxXAdESSignerTLSRenegotiationAttackPreventionModes TLSRenegotiationAttackPreventionMode = { read=FTLSRenegotiationAttackPreventionMode, write=FSetTLSRenegotiationAttackPreventionMode };

enum TsbxXAdESSignerTLSRenegotiationAttackPreventionModes {
  crapmCompatible=0,
  crapmStrict=1,
  crapmAuto=2
};

Default Value

crapmAuto

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

Data Type

Integer

TLSRevocationCheck Property (XAdESSigner Component)

Specifies the kind(s) of revocation check to perform.

Syntax

__property TsbxXAdESSignerTLSRevocationChecks TLSRevocationCheck = { read=FTLSRevocationCheck, write=FSetTLSRevocationCheck };

enum TsbxXAdESSignerTLSRevocationChecks {
  crcNone=0,
  crcAuto=1,
  crcAllCRL=2,
  crcAllOCSP=3,
  crcAllCRLAndOCSP=4,
  crcAnyCRL=5,
  crcAnyOCSP=6,
  crcAnyCRLOrOCSP=7,
  crcAnyOCSPOrCRL=8
};

Default Value

crcAuto

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

This property is not available at design time.

Data Type

Integer

TLSSSLOptions Property (XAdESSigner Component)

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

__property int TLSSSLOptions = { read=FTLSSSLOptions, write=FSetTLSSSLOptions };

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

Data Type

Integer

TLSTLSMode Property (XAdESSigner Component)

Specifies the TLS mode to use.

Syntax

__property TsbxXAdESSignerTLSTLSModes TLSTLSMode = { read=FTLSTLSMode, write=FSetTLSTLSMode };

enum TsbxXAdESSignerTLSTLSModes {
  smDefault=0,
  smNoTLS=1,
  smExplicitTLS=2,
  smImplicitTLS=3,
  smMixedTLS=4
};

Default Value

smDefault

Remarks

Specifies the TLS mode to use.

Data Type

Integer

TLSUseExtendedMasterSecret Property (XAdESSigner Component)

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

__property bool TLSUseExtendedMasterSecret = { read=FTLSUseExtendedMasterSecret, write=FSetTLSUseExtendedMasterSecret };

Default Value

false

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Data Type

Boolean

TLSUseSessionResumption Property (XAdESSigner Component)

Enables or disables the TLS session resumption capability.

Syntax

__property bool TLSUseSessionResumption = { read=FTLSUseSessionResumption, write=FSetTLSUseSessionResumption };

Default Value

false

Remarks

Enables or disables the TLS session resumption capability.

Data Type

Boolean

TLSVersions Property (XAdESSigner Component)

The SSL/TLS versions to enable by default.

Syntax

__property int TLSVersions = { read=FTLSVersions, write=FSetTLSVersions };

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

Data Type

Integer

TrustedCertCount Property (XAdESSigner Component)

The number of records in the TrustedCert arrays.

Syntax

__property int TrustedCertCount = { read=FTrustedCertCount, write=FSetTrustedCertCount };

Default Value

0

Remarks

This property controls the size of the following arrays:

• TrustedCertBytes
• TrustedCertHandle

The array indices start at 0 and end at TrustedCertCount - 1.

This property is not available at design time.

Data Type

Integer

TrustedCertBytes Property (XAdESSigner Component)

Returns the raw certificate data in DER format.

Syntax

__property DynamicArray TrustedCertBytes[int TrustedCertIndex] = { read=FTrustedCertBytes };

Remarks

Returns the raw certificate data in DER format.

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is read-only and not available at design time.

Data Type

Byte Array

TrustedCertHandle Property (XAdESSigner Component)

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

__property __int64 TrustedCertHandle[int TrustedCertIndex] = { read=FTrustedCertHandle, write=FSetTrustedCertHandle };

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The TrustedCertIndex parameter specifies the index of the item in the array. The size of the array is controlled by the TrustedCertCount property.

This property is not available at design time.

Data Type

Long64

ValidationMoment Property (XAdESSigner Component)

The time point at which signature validity is to be established.

Syntax

__property String ValidationMoment = { read=FValidationMoment, write=FSetValidationMoment };

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Data Type

String

AddDataReference Method (XAdESSigner Component)

Creates a new XML reference to the specified data.

Syntax

int __fastcall AddDataReference(String DataURI, DynamicArray<Byte> Data);

Remarks

Use this method to add a reference to the custom data. Pass the reference's URI via DataURI parameter.

This method uses HashAlgorithm property to specify the hash algorithm of the reference.

The method returns the index of the new reference entry in the References collection.

AddKnownNamespace Method (XAdESSigner Component)

Adds known prefix and correspondent namespace URI.

Syntax

void __fastcall AddKnownNamespace(String Prefix, String URI);

Remarks

Use this method to add a known prefix and namespace URI that are used in XPath expression within XMLElement/XMLNode property, and within TargetXMLElement and XPathPrefixList properties of the references.

AddReference Method (XAdESSigner Component)

Creates a new XML reference to the specified XML element.

Syntax

int __fastcall AddReference(String TargetXmlElement, String CustomId, bool AutoGenerateId);

Remarks

Use this method to add a reference to a particular XML element.

The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.

This method uses CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm of the reference.

The method returns the index of the new reference entry in the References collection.

Close Method (XAdESSigner Component)

Closes an opened document.

Syntax

void __fastcall Close(bool SaveChanges);

Remarks

Use this method to close a previously opened document. Set SaveChanges to true to apply any changes made.

Config Method (XAdESSigner Component)

Sets or retrieves a configuration setting.

Syntax

String __fastcall Config(String ConfigurationString);

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (XAdESSigner Component)

Performs an additional action.

Syntax

String __fastcall DoAction(String ActionID, String ActionParams);

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (XAdESSigner Component)

Extracts user data from the DC signing service response.

Syntax

String __fastcall ExtractAsyncData(String AsyncReply);

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

GetInnerXML Method (XAdESSigner Component)

Get the inner XML content of the selected XML element.

Syntax

String __fastcall GetInnerXML(String XPath);

Remarks

Call this method to get the inner XML content of the selected XML element.

GetOuterXML Method (XAdESSigner Component)

Get the outer XML content of the selected XML element.

Syntax

String __fastcall GetOuterXML(String XPath);

Remarks

Call this method to get the outer XML content of the selected XML element.

GetTextContent Method (XAdESSigner Component)

Get the text content of the selected XML element.

Syntax

String __fastcall GetTextContent(String XPath);

Remarks

Call this method to get the text content of the selected XML element.

Open Method (XAdESSigner Component)

Opens a document for signing or updating.

Syntax

void __fastcall Open();

Remarks

Use this method to open a document for signing or updating. When finished, call Close to complete or discard the operation.

Reset Method (XAdESSigner Component)

Resets the component settings.

Syntax

void __fastcall Reset();

Remarks

Reset is a generic method available in every component.

Revalidate Method (XAdESSigner Component)

Revalidates a signature in accordance with current settings.

Syntax

void __fastcall Revalidate(String SigLabel, bool Detached);

Remarks

Use this method to re-validate a signature in the opened XML document.

SelectInfo Method (XAdESSigner Component)

Select signature information for a specific entity.

Syntax

void __fastcall SelectInfo(String EntityLabel, int InfoType, bool ClearSelection);

Remarks

Use this method to select (or filter) signature-related information for a specific signature element.

Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:

Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to SelectInfo and keeping ClearSelection set to false.

This method is useful if you would like to read/display detailed information about a particular signature or timestamp.

SetInnerXML Method (XAdESSigner Component)

Set the inner XML content of the selected XML element.

Syntax

void __fastcall SetInnerXML(String XPath, String Value);

Remarks

Call this method to set the inner XML content of the selected XML element.

SetTextContent Method (XAdESSigner Component)

Set the text content of the selected XML element.

Syntax

void __fastcall SetTextContent(String XPath, String Value);

Remarks

Call this method to set the text content of the selected XML element.

Sign Method (XAdESSigner Component)

Signs an XML document.

Syntax

void __fastcall Sign();

Remarks

Call this method to generate a signature over an XML document.

SignAsyncBegin Method (XAdESSigner Component)

Initiates the asynchronous signing operation.

Syntax

String __fastcall SignAsyncBegin();

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (XAdESSigner Component)

Completes the asynchronous signing operation.

Syntax

void __fastcall SignAsyncEnd(String AsyncReply);

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignExternal Method (XAdESSigner Component)

Signs the document using an external signing facility.

Syntax

void __fastcall SignExternal();

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the component fires ExternalSign event which allows to pass the hash value for signing.

Timestamp Method (XAdESSigner Component)

Use this method to add an timestamp.

Syntax

void __fastcall Timestamp(String SigLabel, int TimestampType);

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. This method could be called separately or in SignatureValidated event handler after successful signature validation. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:

Upgrade Method (XAdESSigner Component)

Upgrades existing XAdES signature to a new form.

Syntax

void __fastcall Upgrade(String SigLabel, int UpgradeKind);

Remarks

XAdES standard defines a number of different 'forms' of signatures which can be used for different purposes. Use this method to upgrade XAdES signature to a new form or level specified by UpgradeKind. Signatures can normally be upgraded from less sophisticated levels (BES, EPES) to more sophisticated (T, C, X, X-L, A).

The supported levels and forms are:

The supported additional upgrade kinds are:

ChainElementDownload Event (XAdESSigner Component)

Fires when there is a need to download a chain element from an online source.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
  String Location;
  int Action;
} TsbxXAdESSignerChainElementDownloadEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerChainElementDownloadEvent)(System::TObject* Sender, TsbxXAdESSignerChainElementDownloadEventParams *e);
__property TsbxXAdESSignerChainElementDownloadEvent OnChainElementDownload = { read=FOnChainElementDownload, write=FOnChainElementDownload };

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (XAdESSigner Component)

Fires when an element required to validate the chain was not located.

Syntax

typedef struct {
  int Kind;
  String CertRDN;
  String CACertRDN;
} TsbxXAdESSignerChainElementNeededEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerChainElementNeededEvent)(System::TObject* Sender, TsbxXAdESSignerChainElementNeededEventParams *e);
__property TsbxXAdESSignerChainElementNeededEvent OnChainElementNeeded = { read=FOnChainElementNeeded, write=FOnChainElementNeeded };

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (XAdESSigner Component)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

typedef struct {
  int Kind;
  DynamicArray Body;
  String URI;
} TsbxXAdESSignerChainElementStoreEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerChainElementStoreEvent)(System::TObject* Sender, TsbxXAdESSignerChainElementStoreEventParams *e);
__property TsbxXAdESSignerChainElementStoreEvent OnChainElementStore = { read=FOnChainElementStore, write=FOnChainElementStore };

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (XAdESSigner Component)

Reports the completion of a certificate chain validation.

Syntax

typedef struct {
  int Index;
  String EntityLabel;
  String SubjectRDN;
  int ValidationResult;
  int ValidationDetails;
  bool Cancel;
} TsbxXAdESSignerChainValidatedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerChainValidatedEvent)(System::TObject* Sender, TsbxXAdESSignerChainValidatedEventParams *e);
__property TsbxXAdESSignerChainValidatedEvent OnChainValidated = { read=FOnChainValidated, write=FOnChainValidated };

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

Any other value reports a failure, and ValidationDetails provides more details on its reasons.

ChainValidationProgress Event (XAdESSigner Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

typedef struct {
  String EventKind;
  String CertRDN;
  String CACertRDN;
  int Action;
} TsbxXAdESSignerChainValidationProgressEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerChainValidationProgressEvent)(System::TObject* Sender, TsbxXAdESSignerChainValidationProgressEventParams *e);
__property TsbxXAdESSignerChainValidationProgressEvent OnChainValidationProgress = { read=FOnChainValidationProgress, write=FOnChainValidationProgress };

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

DocumentLoaded Event (XAdESSigner Component)

This event is fired when the document has been loaded into memory.

Syntax

typedef struct {
  bool Cancel;
} TsbxXAdESSignerDocumentLoadedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerDocumentLoadedEvent)(System::TObject* Sender, TsbxXAdESSignerDocumentLoadedEventParams *e);
__property TsbxXAdESSignerDocumentLoadedEvent OnDocumentLoaded = { read=FOnDocumentLoaded, write=FOnDocumentLoaded };

Remarks

The handler for this event is a good place to check document properties, which may be useful when preparing the signature, for example, the document format.

Set Cancel to true to terminate document processing on this stage.

Error Event (XAdESSigner Component)

Information about errors during signing.

Syntax

typedef struct {
  int ErrorCode;
  String Description;
} TsbxXAdESSignerErrorEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerErrorEvent)(System::TObject* Sender, TsbxXAdESSignerErrorEventParams *e);
__property TsbxXAdESSignerErrorEvent OnError = { read=FOnError, write=FOnError };

Remarks

The event is fired in case of exceptional conditions during signing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to XML.

ExternalSign Event (XAdESSigner Component)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

typedef struct {
  String OperationId;
  String HashAlgorithm;
  String Pars;
  String Data;
  String SignedData;
} TsbxXAdESSignerExternalSignEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerExternalSignEvent)(System::TObject* Sender, TsbxXAdESSignerExternalSignEventParams *e);
__property TsbxXAdESSignerExternalSignEvent OnExternalSign = { read=FOnExternalSign, write=FOnExternalSign };

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The component uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

FormatElement Event (XAdESSigner Component)

Reports the XML element that is currently being processed.

Syntax

typedef struct {
  String StartTagWhitespace;
  String EndTagWhitespace;
  int Level;
  String Path;
  bool HasChildElements;
} TsbxXAdESSignerFormatElementEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerFormatElementEvent)(System::TObject* Sender, TsbxXAdESSignerFormatElementEventParams *e);
__property TsbxXAdESSignerFormatElementEvent OnFormatElement = { read=FOnFormatElement, write=FOnFormatElement };

Remarks

Path and Level specify the path to the XML element being processed and its nesting level, respectively.

HasChildElements specify if processed XML element has child elements.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

FormatText Event (XAdESSigner Component)

Reports XML text that is currently being processed.

Syntax

typedef struct {
  String Text;
  int TextType;
  int Level;
  String Path;
} TsbxXAdESSignerFormatTextEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerFormatTextEvent)(System::TObject* Sender, TsbxXAdESSignerFormatTextEventParams *e);
__property TsbxXAdESSignerFormatTextEvent OnFormatText = { read=FOnFormatText, write=FOnFormatText };

Remarks

TextType parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; Path and Level specify the path to the XML element and its nesting level.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

Notification Event (XAdESSigner Component)

This event notifies the application about an underlying control flow event.

Syntax

typedef struct {
  String EventID;
  String EventParam;
} TsbxXAdESSignerNotificationEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerNotificationEvent)(System::TObject* Sender, TsbxXAdESSignerNotificationEventParams *e);
__property TsbxXAdESSignerNotificationEvent OnNotification = { read=FOnNotification, write=FOnNotification };

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This component can fire this event with the following EventID values:

ReferenceValidated Event (XAdESSigner Component)

Marks the end of a reference validation.

Syntax

typedef struct {
  int ReferenceIndex;
  String ID;
  String URI;
  String RefType;
  bool DigestValid;
} TsbxXAdESSignerReferenceValidatedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerReferenceValidatedEvent)(System::TObject* Sender, TsbxXAdESSignerReferenceValidatedEventParams *e);
__property TsbxXAdESSignerReferenceValidatedEvent OnReferenceValidated = { read=FOnReferenceValidated, write=FOnReferenceValidated };

Remarks

The component fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.

ResolveReference Event (XAdESSigner Component)

Asks the application to resolve a reference.

Syntax

typedef struct {
  int ReferenceIndex;
  String URI;
} TsbxXAdESSignerResolveReferenceEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerResolveReferenceEvent)(System::TObject* Sender, TsbxXAdESSignerResolveReferenceEventParams *e);
__property TsbxXAdESSignerResolveReferenceEvent OnResolveReference = { read=FOnResolveReference, write=FOnResolveReference };

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

SignatureFound Event (XAdESSigner Component)

Signifies the start of signature validation.

Syntax

typedef struct {
  int Index;
  String EntityLabel;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateSignature;
  bool ValidateChain;
} TsbxXAdESSignerSignatureFoundEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerSignatureFoundEvent)(System::TObject* Sender, TsbxXAdESSignerSignatureFoundEventParams *e);
__property TsbxXAdESSignerSignatureFoundEvent OnSignatureFound = { read=FOnSignatureFound, write=FOnSignatureFound };

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (XAdESSigner Component)

Marks the completion of the signature validation routine.

Syntax

typedef struct {
  int Index;
  String EntityLabel;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  int ValidationResult;
  bool Cancel;
} TsbxXAdESSignerSignatureValidatedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerSignatureValidatedEvent)(System::TObject* Sender, TsbxXAdESSignerSignatureValidatedEventParams *e);
__property TsbxXAdESSignerSignatureValidatedEvent OnSignatureValidated = { read=FOnSignatureValidated, write=FOnSignatureValidated };

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (XAdESSigner Component)

Signifies the start of a timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String EntityLabel;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  bool CertFound;
  bool ValidateTimestamp;
  bool ValidateChain;
} TsbxXAdESSignerTimestampFoundEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTimestampFoundEvent)(System::TObject* Sender, TsbxXAdESSignerTimestampFoundEventParams *e);
__property TsbxXAdESSignerTimestampFoundEvent OnTimestampFound = { read=FOnTimestampFound, write=FOnTimestampFound };

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampRequest Event (XAdESSigner Component)

Fires when the component is ready to request a timestamp from an external TSA.

Syntax

typedef struct {
  String TSA;
  String TimestampRequest;
  String TimestampResponse;
  bool SuppressDefault;
} TsbxXAdESSignerTimestampRequestEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTimestampRequestEvent)(System::TObject* Sender, TsbxXAdESSignerTimestampRequestEventParams *e);
__property TsbxXAdESSignerTimestampRequestEvent OnTimestampRequest = { read=FOnTimestampRequest, write=FOnTimestampRequest };

Remarks

Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

TimestampValidated Event (XAdESSigner Component)

Reports the completion of the timestamp validation routine.

Syntax

typedef struct {
  int Index;
  String EntityLabel;
  String IssuerRDN;
  DynamicArray SerialNumber;
  DynamicArray SubjectKeyID;
  String Time;
  int ValidationResult;
  int ChainValidationResult;
  int ChainValidationDetails;
  bool Cancel;
} TsbxXAdESSignerTimestampValidatedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTimestampValidatedEvent)(System::TObject* Sender, TsbxXAdESSignerTimestampValidatedEventParams *e);
__property TsbxXAdESSignerTimestampValidatedEvent OnTimestampValidated = { read=FOnTimestampValidated, write=FOnTimestampValidated };

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (XAdESSigner Component)

Fires when a remote TLS party requests a client certificate.

Syntax

typedef struct {
  String Host;
  String CANames;
} TsbxXAdESSignerTLSCertNeededEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTLSCertNeededEvent)(System::TObject* Sender, TsbxXAdESSignerTLSCertNeededEventParams *e);
__property TsbxXAdESSignerTLSCertNeededEvent OnTLSCertNeeded = { read=FOnTLSCertNeeded, write=FOnTLSCertNeeded };

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (XAdESSigner Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

typedef struct {
  String ServerHost;
  String ServerIP;
  bool Accept;
} TsbxXAdESSignerTLSCertValidateEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTLSCertValidateEvent)(System::TObject* Sender, TsbxXAdESSignerTLSCertValidateEventParams *e);
__property TsbxXAdESSignerTLSCertValidateEvent OnTLSCertValidate = { read=FOnTLSCertValidate, write=FOnTLSCertValidate };

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (XAdESSigner Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

typedef struct {
  String Host;
  String Version;
  String Ciphersuite;
  DynamicArray ConnectionId;
  bool Abort;
} TsbxXAdESSignerTLSEstablishedEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTLSEstablishedEvent)(System::TObject* Sender, TsbxXAdESSignerTLSEstablishedEventParams *e);
__property TsbxXAdESSignerTLSEstablishedEvent OnTLSEstablished = { read=FOnTLSEstablished, write=FOnTLSEstablished };

Remarks

The component uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (XAdESSigner Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

typedef struct {
  String Host;
  bool Abort;
} TsbxXAdESSignerTLSHandshakeEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTLSHandshakeEvent)(System::TObject* Sender, TsbxXAdESSignerTLSHandshakeEventParams *e);
__property TsbxXAdESSignerTLSHandshakeEvent OnTLSHandshake = { read=FOnTLSHandshake, write=FOnTLSHandshake };

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (XAdESSigner Component)

Reports the graceful closure of a TLS connection.

Syntax

typedef struct {
  String Host;
} TsbxXAdESSignerTLSShutdownEventParams;
typedef void __fastcall (__closure *TsbxXAdESSignerTLSShutdownEvent)(System::TObject* Sender, TsbxXAdESSignerTLSShutdownEventParams *e);
__property TsbxXAdESSignerTLSShutdownEvent OnTLSShutdown = { read=FOnTLSShutdown, write=FOnTLSShutdown };

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Config Settings (XAdESSigner Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

XAdESSigner Config Settings

Base Config Settings

Trappable Errors (XAdESSigner Component)

XAdESSigner Errors