DCAuthWebServer Class

Properties   Methods   Events   Config Settings   Errors  

The DCAuthWebServer Class offers higher-level access to 'private key side' functionality of SecureBlackbox DC protocol.

Syntax

class secureblackbox.DCAuthWebServer

Remarks

DCAuthWebServer provides a built-in REST responder for DC requests. Use it in conjunction with the in-browser Javascript that comes with DC package, or with standalone DC requestors. DCAuthWebServer listens to DC requests on a specific port or a port chosen between port_range_from and port_range_to. Use DCAuth, which provides a lower-level access to the signing engine, to implement DC in applications, apps, or services.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

activeIndicates whether the server is active and is listening to new connections.
allow_originSpecifies the content of AllowOrigin header of the service reply.
auth_basicEnables or disables basic authentication.
auth_digestEnables or disables digest authentication.
auth_digest_expireSpecifies digest expiration time for digest authentication.
auth_realmSpecifies authentication realm for digest and NTLM authentication.
bound_portIndicates the bound listening port.
client_authEnables or disables certificate-based client authentication.
error_originIndicates the endpoint where the error originates from.
error_severityThe severity of the error that happened.
external_crypto_async_document_idSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
external_crypto_custom_paramsCustom parameters to be passed to the signing service (uninterpreted).
external_crypto_dataAdditional data to be included in the async state and mirrored back by the requestor.
external_crypto_external_hash_calculationSpecifies whether the message hash is to be calculated at the external endpoint.
external_crypto_hash_algorithmSpecifies the request's signature hash algorithm.
external_crypto_key_idThe ID of the pre-shared key used for DC request authentication.
external_crypto_key_secretThe pre-shared key used for DC request authentication.
external_crypto_methodSpecifies the asynchronous signing method.
external_crypto_modeSpecifies the external cryptography mode.
external_crypto_public_key_algorithmProvide public key algorithm here if the certificate is not available on the pre-signing stage.
fips_modeReserved.
handshake_timeoutSpecifies the handshake timeout in milliseconds.
hostThe host to bind the listening port to.
key_idSpecifies the KeyID of the pre-shared authentication key.
key_secretThe pre-shared authentication key.
pinned_client_addressThe client's IP address.
pinned_client_chain_validation_detailsThe details of a certificate chain validation outcome.
pinned_client_chain_validation_resultThe outcome of a certificate chain validation routine.
pinned_client_ciphersuiteThe cipher suite employed by this connection.
pinned_client_client_authenticatedSpecifies whether client authentication was performed during this connection.
pinned_client_digest_algorithmThe digest algorithm used in a TLS-enabled connection.
pinned_client_encryption_algorithmThe symmetric encryption algorithm used in a TLS-enabled connection.
pinned_client_idThe client connection's unique identifier.
pinned_client_key_exchange_algorithmThe key exchange algorithm used in a TLS-enabled connection.
pinned_client_key_exchange_key_bitsThe length of the key exchange key of a TLS-enabled connection.
pinned_client_named_ec_curveThe elliptic curve used in this connection.
pinned_client_pfs_cipherIndicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
pinned_client_portThe remote port of the client connection.
pinned_client_pre_shared_identitySpecifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
pinned_client_public_key_bitsThe length of the public key.
pinned_client_resumed_sessionIndicates whether a TLS-enabled connection was spawned from another TLS connection.
pinned_client_secure_connectionIndicates whether TLS or SSL is enabled for this connection.
pinned_client_signature_algorithmThe signature algorithm used in a TLS handshake.
pinned_client_symmetric_block_sizeThe block size of the symmetric algorithm used.
pinned_client_symmetric_key_bitsThe key length of the symmetric algorithm used.
pinned_client_total_bytes_receivedThe total number of bytes received over this connection.
pinned_client_total_bytes_sentThe total number of bytes sent over this connection.
pinned_client_validation_logContains the server certificate's chain validation log.
pinned_client_versionIndicates the version of SSL/TLS protocol negotiated during this connection.
pinned_client_cert_countThe number of records in the PinnedClientCert arrays.
pinned_client_cert_bytesReturns raw certificate data in DER format.
pinned_client_cert_ca_key_idA unique identifier (fingerprint) of the CA certificate's private key.
pinned_client_cert_fingerprintContains the fingerprint (a hash imprint) of this certificate.
pinned_client_cert_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
pinned_client_cert_issuerThe common name of the certificate issuer (CA), typically a company name.
pinned_client_cert_issuer_rdnA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
pinned_client_cert_key_algorithmSpecifies the public key algorithm of this certificate.
pinned_client_cert_key_bitsReturns the length of the public key.
pinned_client_cert_key_fingerprintReturns a fingerprint of the public key contained in the certificate.
pinned_client_cert_key_usageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
pinned_client_cert_public_key_bytesContains the certificate's public key in DER format.
pinned_client_cert_self_signedIndicates whether the certificate is self-signed (root) or signed by an external CA.
pinned_client_cert_serial_numberReturns the certificate's serial number.
pinned_client_cert_sig_algorithmIndicates the algorithm that was used by the CA to sign this certificate.
pinned_client_cert_subjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
pinned_client_cert_subject_key_idContains a unique identifier (fingerprint) of the certificate's private key.
pinned_client_cert_subject_rdnA collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
pinned_client_cert_valid_fromThe time point at which the certificate becomes valid, in UTC.
pinned_client_cert_valid_toThe time point at which the certificate expires, in UTC.
policiesSpecifies the policies to use when processing requests.
portSpecifies the port number to listen for connections on.
port_range_fromSpecifies the lower limit of the listening port range for incoming connections.
port_range_toSpecifies the upper limit of the listening port range for incoming connections.
server_cert_countThe number of records in the ServerCert arrays.
server_cert_bytesReturns raw certificate data in DER format.
server_cert_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
session_timeoutSpecifies the default session timeout value in milliseconds.
sign_endpointThe signing service endpoint.
signing_cert_bytesReturns raw certificate data in DER format.
signing_cert_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
signing_chain_countThe number of records in the SigningChain arrays.
signing_chain_bytesReturns raw certificate data in DER format.
signing_chain_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
socket_incoming_speed_limitThe maximum number of bytes to read from the socket, per second.
socket_local_addressThe local network interface to bind the socket to.
socket_local_portThe local port number to bind the socket to.
socket_outgoing_speed_limitThe maximum number of bytes to write to the socket, per second.
socket_timeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
socket_use_ipv6Enables or disables IP protocol version 6.
storage_idSpecifies the signing certificate residing in an alternative location.
timestamp_serverThe address of the timestamping server.
tls_auto_validate_certificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
tls_base_configurationSelects the base configuration for the TLS settings.
tls_ciphersuitesA list of ciphersuites separated with commas or semicolons.
tls_ec_curvesDefines the elliptic curves to enable.
tls_extensionsProvides access to TLS extensions.
tls_force_resume_if_destination_changesWhether to force TLS session resumption when the destination address changes.
tls_pre_shared_identityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
tls_pre_shared_keyContains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
tls_pre_shared_key_ciphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
tls_renegotiation_attack_prevention_modeSelects renegotiation attack prevention mechanism.
tls_revocation_checkSpecifies the kind(s) of revocation check to perform.
tls_ssl_optionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
tls_tls_modeSpecifies the TLS mode to use.
tls_use_extended_master_secretEnables Extended Master Secret Extension, as defined in RFC 7627.
tls_use_session_resumptionEnables or disables TLS session resumption capability.
tls_versionsThe SSL/TLS versions to enable by default.
user_countThe number of records in the User arrays.
user_associated_dataContains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.
user_base_pathBase path for this user in the server's file system.
user_certContains the user's certificate.
user_dataContains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.
user_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
user_hash_algorithmSpecifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.
user_incoming_speed_limitSpecifies the incoming speed limit for this user.
user_outgoing_speed_limitSpecifies the outgoing speed limit for this user.
user_passwordThe user's authentication password.
user_shared_secretContains the user's secret key, which is essentially a shared secret between the client and server.
user_usernameThe registered name (login) of the user.
website_nameSpecifies the web site name to use in the certificate.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

configSets or retrieves a configuration setting.
do_actionPerforms an additional action.
drop_clientTerminates a client connection.
list_clientsEnumerates the connected clients.
pin_clientTakes a snapshot of the connection's properties.
startStarts the server.
stopStops the server.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

on_acceptReports an incoming connection.
on_auth_attemptFires when a connected client makes an authentication attempt.
on_connectReports an accepted connection.
on_custom_parameters_receivedPasses custom request parameters to the application.
on_disconnectFires to report a disconnected client.
on_errorInformation about errors during data delivery.
on_external_signHandles remote or external signing initiated by the server protocol.
on_key_secret_neededRequests the key secret from the application.
on_logReports a single log line.
on_notificationThis event notifies the application about an underlying control flow event.
on_parameter_receivedPasses a standard request parameter to the user code.
on_password_neededRequests a password from the application.
on_read_optionFires when the client sends in a read option request.
on_select_certRequests certificate selection criteria from the application.
on_sign_requestThis event signifies the processing of an atomic signing request.
on_sign_request_completedThis event signifies completion of the processing of an atomic signing request.
on_timestamp_requestFires when the class is ready to request a timestamp from an external TSA.
on_tls_cert_validateFires when a client certificate needs to be validated.
on_tls_establishedReports the setup of a TLS session.
on_tls_handshakeFires when a newly established client connection initiates a TLS handshake.
on_tls_pskRequests a pre-shared key for TLS-PSK.
on_tls_shutdownReports closure of a TLS session.
on_write_optionFires when the client sends in a write option request.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

active Property

Indicates whether the server is active and is listening to new connections.

Syntax

def get_active() -> bool: ...

active = property(get_active, None)

Default Value

FALSE

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only.

allow_origin Property

Specifies the content of AllowOrigin header of the service reply.

Syntax

def get_allow_origin() -> str: ...
def set_allow_origin(value: str) -> None: ...

allow_origin = property(get_allow_origin, set_allow_origin)

Default Value

""

Remarks

Use this property to specify the content of AllowOrigin header included with the service reply. If left empty, the * header will be returned.

auth_basic Property

Enables or disables basic authentication.

Syntax

def get_auth_basic() -> bool: ...
def set_auth_basic(value: bool) -> None: ...

auth_basic = property(get_auth_basic, set_auth_basic)

Default Value

FALSE

Remarks

Use this property to enable or disable basic user authentication in the HTTP server.

auth_digest Property

Enables or disables digest authentication.

Syntax

def get_auth_digest() -> bool: ...
def set_auth_digest(value: bool) -> None: ...

auth_digest = property(get_auth_digest, set_auth_digest)

Default Value

FALSE

Remarks

Use this property to enable or disable digest-based user authentication in the HTTP server.

auth_digest_expire Property

Specifies digest expiration time for digest authentication.

Syntax

def get_auth_digest_expire() -> int: ...
def set_auth_digest_expire(value: int) -> None: ...

auth_digest_expire = property(get_auth_digest_expire, set_auth_digest_expire)

Default Value

20

Remarks

Use this property to specify the digest expiration time for digest authentication, in seconds. This is effectively the maximal time between the first and the second steps of the authentication process.

auth_realm Property

Specifies authentication realm for digest and NTLM authentication.

Syntax

def get_auth_realm() -> str: ...
def set_auth_realm(value: str) -> None: ...

auth_realm = property(get_auth_realm, set_auth_realm)

Default Value

"SecureBlackbox"

Remarks

Specifies authentication realm for digest and NTLM authentication types.

bound_port Property

Indicates the bound listening port.

Syntax

def get_bound_port() -> int: ...

bound_port = property(get_bound_port, None)

Default Value

0

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals port if it is provided, or is allocated dynamically if configured to fall in the range between port_range_from and port_range_to constraints.

This property is read-only.

client_auth Property

Enables or disables certificate-based client authentication.

Syntax

def get_client_auth() -> int: ...
def set_client_auth(value: int) -> None: ...

client_auth = property(get_client_auth, set_client_auth)

Default Value

0

Remarks

Set this property to true to tune up the client authentication type: ccatNoAuth = 0; ccatRequestCert = 1; ccatRequireCert = 2;

error_origin Property

Indicates the endpoint where the error originates from.

Syntax

def get_error_origin() -> int: ...
def set_error_origin(value: int) -> None: ...

error_origin = property(get_error_origin, set_error_origin)

Default Value

0

Remarks

Use this property to establish whether the reported error originates from a local or remote endpoint.

eoLocal0
eoRemote1

error_severity Property

The severity of the error that happened.

Syntax

def get_error_severity() -> int: ...
def set_error_severity(value: int) -> None: ...

error_severity = property(get_error_severity, set_error_severity)

Default Value

1

Remarks

Use this property to establish whether the error is fatal.

esWarning1
esFatal2

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

external_crypto_public_key_algorithm Property

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

""

Remarks

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

handshake_timeout Property

Specifies the handshake timeout in milliseconds.

Syntax

def get_handshake_timeout() -> int: ...
def set_handshake_timeout(value: int) -> None: ...

handshake_timeout = property(get_handshake_timeout, set_handshake_timeout)

Default Value

20000

Remarks

Use this property to set the TLS handshake timeout.

host Property

The host to bind the listening port to.

Syntax

def get_host() -> str: ...
def set_host(value: str) -> None: ...

host = property(get_host, set_host)

Default Value

""

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

key_id Property

Specifies the KeyID of the pre-shared authentication key.

Syntax

def get_key_id() -> str: ...
def set_key_id(value: str) -> None: ...

key_id = property(get_key_id, set_key_id)

Default Value

""

Remarks

If processing requests from a single known party, assign the Id of the key you pre-shared with them to this property, and the key itself to the key_secret property. If you expect to receive requests from many parties with different authentication keys, use on_key_secret_needed event instead.

key_secret Property

The pre-shared authentication key.

Syntax

def get_key_secret() -> str: ...
def set_key_secret(value: str) -> None: ...

key_secret = property(get_key_secret, set_key_secret)

Default Value

""

Remarks

If processing requests from a single known party, assign the key you pre-shared with them to this property. Use key_id property to assign the ID of that key. If you expect to receive requests from many parties with different authentication keys, use on_key_secret_needed event instead.

pinned_client_address Property

The client's IP address.

Syntax

def get_pinned_client_address() -> str: ...

pinned_client_address = property(get_pinned_client_address, None)

Default Value

""

Remarks

The client's IP address.

This property is read-only.

pinned_client_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_pinned_client_chain_validation_details() -> int: ...

pinned_client_chain_validation_details = property(get_pinned_client_chain_validation_details, None)

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only.

pinned_client_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_pinned_client_chain_validation_result() -> int: ...

pinned_client_chain_validation_result = property(get_pinned_client_chain_validation_result, None)

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

pinned_client_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_pinned_client_ciphersuite() -> str: ...

pinned_client_ciphersuite = property(get_pinned_client_ciphersuite, None)

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

pinned_client_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_pinned_client_client_authenticated() -> bool: ...

pinned_client_client_authenticated = property(get_pinned_client_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

pinned_client_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_digest_algorithm() -> str: ...

pinned_client_digest_algorithm = property(get_pinned_client_digest_algorithm, None)

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_encryption_algorithm() -> str: ...

pinned_client_encryption_algorithm = property(get_pinned_client_encryption_algorithm, None)

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_id Property

The client connection's unique identifier.

Syntax

def get_pinned_client_id() -> int: ...

pinned_client_id = property(get_pinned_client_id, None)

Default Value

-1

Remarks

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

This property is read-only.

pinned_client_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_algorithm() -> str: ...

pinned_client_key_exchange_algorithm = property(get_pinned_client_key_exchange_algorithm, None)

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_key_bits() -> int: ...

pinned_client_key_exchange_key_bits = property(get_pinned_client_key_exchange_key_bits, None)

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

pinned_client_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_pinned_client_named_ec_curve() -> str: ...

pinned_client_named_ec_curve = property(get_pinned_client_named_ec_curve, None)

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only.

pinned_client_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_pinned_client_pfs_cipher() -> bool: ...

pinned_client_pfs_cipher = property(get_pinned_client_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

pinned_client_port Property

The remote port of the client connection.

Syntax

def get_pinned_client_port() -> int: ...

pinned_client_port = property(get_pinned_client_port, None)

Default Value

0

Remarks

The remote port of the client connection.

This property is read-only.

pinned_client_pre_shared_identity Property

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_pinned_client_pre_shared_identity() -> str: ...

pinned_client_pre_shared_identity = property(get_pinned_client_pre_shared_identity, None)

Default Value

""

Remarks

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is read-only.

pinned_client_public_key_bits Property

The length of the public key.

Syntax

def get_pinned_client_public_key_bits() -> int: ...

pinned_client_public_key_bits = property(get_pinned_client_public_key_bits, None)

Default Value

0

Remarks

The length of the public key.

This property is read-only.

pinned_client_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_pinned_client_resumed_session() -> bool: ...

pinned_client_resumed_session = property(get_pinned_client_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

pinned_client_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_pinned_client_secure_connection() -> bool: ...

pinned_client_secure_connection = property(get_pinned_client_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

pinned_client_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_pinned_client_signature_algorithm() -> str: ...

pinned_client_signature_algorithm = property(get_pinned_client_signature_algorithm, None)

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

pinned_client_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_block_size() -> int: ...

pinned_client_symmetric_block_size = property(get_pinned_client_symmetric_block_size, None)

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

pinned_client_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_key_bits() -> int: ...

pinned_client_symmetric_key_bits = property(get_pinned_client_symmetric_key_bits, None)

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

pinned_client_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_pinned_client_total_bytes_received() -> int: ...

pinned_client_total_bytes_received = property(get_pinned_client_total_bytes_received, None)

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only.

pinned_client_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_pinned_client_total_bytes_sent() -> int: ...

pinned_client_total_bytes_sent = property(get_pinned_client_total_bytes_sent, None)

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only.

pinned_client_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_pinned_client_validation_log() -> str: ...

pinned_client_validation_log = property(get_pinned_client_validation_log, None)

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

pinned_client_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_pinned_client_version() -> str: ...

pinned_client_version = property(get_pinned_client_version, None)

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

pinned_client_cert_count Property

The number of records in the PinnedClientCert arrays.

Syntax

def get_pinned_client_cert_count() -> int: ...

pinned_client_cert_count = property(get_pinned_client_cert_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at pinned_client_cert_count - 1.

This property is read-only.

pinned_client_cert_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_pinned_client_cert_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns raw certificate data in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

def get_pinned_client_cert_ca_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_pinned_client_cert_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_pinned_client_cert_handle(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_pinned_client_cert_issuer(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

def get_pinned_client_cert_issuer_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_pinned_client_cert_key_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_bits Property

Returns the length of the public key.

Syntax

def get_pinned_client_cert_key_bits(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the length of the public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_fingerprint Property

Returns a fingerprint of the public key contained in the certificate.

Syntax

def get_pinned_client_cert_key_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns a fingerprint of the public key contained in the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_pinned_client_cert_key_usage(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_pinned_client_cert_public_key_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_pinned_client_cert_self_signed(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_pinned_client_cert_serial_number(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_pinned_client_cert_sig_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_pinned_client_cert_subject(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_key_id Property

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

def get_pinned_client_cert_subject_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

def get_pinned_client_cert_subject_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_pinned_client_cert_valid_from(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_pinned_client_cert_valid_to(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

policies Property

Specifies the policies to use when processing requests.

Syntax

def get_policies() -> int: ...
def set_policies(value: int) -> None: ...

policies = property(get_policies, set_policies)

Default Value

0

Remarks

This property lets you specify policies to apply blanketly to the requests. If this property does not give you enough flexibility - for example, if you need to cherry-pick requests basing on their content - please consider using the on_sign_request (allows you to track individual requests) and/or on_external_sign (lets you perform the signing manually) events. This setting is a bit mask of the following flags:

aspAcceptUnsignedRequests1Allows the component to accept unauthenticated messages (those not signed with KeyID/KeySecret). Use with extreme care.

aspIgnorePKCS1Requests2Ignore requests of PKCS1 type.

aspIgnorePKCS7Requests4Ignore requests of PKCS7 type.

aspIgnoreRequestTSA8Ignore the TSA URL provided in the request, and either stick with the service provided via TimestampServer property, or not timestamp the message altogether.

aspIgnoreRequestSigningTime16Ignore the signing time included in the request.

aspIgnoreRequestPKCS7Settings32Ignore auxiliary PKCS7 settings (content type, attributes) included in the request.

aspAlwaysTimestampSigs64Timestamp created signatures (PKCS7 only), even if the client did not request it.

port Property

Specifies the port number to listen for connections on.

Syntax

def get_port() -> int: ...
def set_port(value: int) -> None: ...

port = property(get_port, set_port)

Default Value

80

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via port_range_from and port_range_to properties. In this case the port will be allocated within the requested range by the operating system, and reported in bound_port.

port_range_from Property

Specifies the lower limit of the listening port range for incoming connections.

Syntax

def get_port_range_from() -> int: ...
def set_port_range_from(value: int) -> None: ...

port_range_from = property(get_port_range_from, set_port_range_from)

Default Value

0

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and reported in bound_port.

Note that this property is ignored if the port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

port_range_to Property

Specifies the upper limit of the listening port range for incoming connections.

Syntax

def get_port_range_to() -> int: ...
def set_port_range_to(value: int) -> None: ...

port_range_to = property(get_port_range_to, set_port_range_to)

Default Value

0

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and reported in bound_port.

Note that this property is ignored if the port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

server_cert_count Property

The number of records in the ServerCert arrays.

Syntax

def get_server_cert_count() -> int: ...
def set_server_cert_count(value: int) -> None: ...

server_cert_count = property(get_server_cert_count, set_server_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at server_cert_count - 1.

server_cert_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_server_cert_bytes(server_cert_index: int) -> bytes: ...

Remarks

Returns raw certificate data in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_server_cert_handle(server_cert_index: int) -> int: ...
def set_server_cert_handle(server_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

session_timeout Property

Specifies the default session timeout value in milliseconds.

Syntax

def get_session_timeout() -> int: ...
def set_session_timeout(value: int) -> None: ...

session_timeout = property(get_session_timeout, set_session_timeout)

Default Value

360000

Remarks

Specifies the period of inactivity (in milliseconds) after which the connection will be terminated by the server.

sign_endpoint Property

The signing service endpoint.

Syntax

def get_sign_endpoint() -> str: ...
def set_sign_endpoint(value: str) -> None: ...

sign_endpoint = property(get_sign_endpoint, set_sign_endpoint)

Default Value

"/sign"

Remarks

Use this property to specify the signing service end point on the server.

signing_cert_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_signing_cert_bytes() -> bytes: ...

signing_cert_bytes = property(get_signing_cert_bytes, None)

Remarks

Returns raw certificate data in DER format.

This property is read-only.

signing_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_signing_cert_handle() -> int: ...
def set_signing_cert_handle(value: int) -> None: ...

signing_cert_handle = property(get_signing_cert_handle, set_signing_cert_handle)

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

signing_chain_count Property

The number of records in the SigningChain arrays.

Syntax

def get_signing_chain_count() -> int: ...
def set_signing_chain_count(value: int) -> None: ...

signing_chain_count = property(get_signing_chain_count, set_signing_chain_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at signing_chain_count - 1.

signing_chain_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_signing_chain_bytes(signing_chain_index: int) -> bytes: ...

Remarks

Returns raw certificate data in DER format.

The signing_chain_index parameter specifies the index of the item in the array. The size of the array is controlled by the signing_chain_count property.

This property is read-only.

signing_chain_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_signing_chain_handle(signing_chain_index: int) -> int: ...
def set_signing_chain_handle(signing_chain_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The signing_chain_index parameter specifies the index of the item in the array. The size of the array is controlled by the signing_chain_count property.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

""

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

0

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

storage_id Property

Specifies the signing certificate residing in an alternative location.

Syntax

def get_storage_id() -> str: ...
def set_storage_id(value: str) -> None: ...

storage_id = property(get_storage_id, set_storage_id)

Default Value

""

Remarks

Use this property to specify the signing certificate contained on alternative media, such as a hardware device or in a system certificate store.

Example 1: The certificate resides on a PKCS#11 device

pkcs11://user:pin@/c:/windows/system32/pkcsdriver.dll?slot=0&readonly=1

Example 2: The certificate resides in a system store

system://localmachine@/?store=MY

You can use the following URI modifiers to provide more accurate specifiers for the needed certificate:

  • cn: the common name of the certificate subject.
  • keyid: the unique identifier included in subject key identifier extension of the certificate.
  • keyusage: a comma-separated list of enabled (+) or disabled (-) key usages. The following usages are supported: signature, nonrepudiation, keyencipherment, dataencipherment, keyagreement, keycertsign, crlsign, encipheronly, decipheronly, serverauth, clientauth, codesigning, emailprotection, timestamping, ocspsigning, smartcardlogon, keypurposeclientauth, keypurposekdc.
  • fingerprint: the fingerprint of the certificate.

Example 3: selecting the certificate with a given fingerprint:

pkcs11://user:pin@/c:/windows/system32/pkcsdriver.dll?slot=0&readonly=1&fingerprint=001122334455667788aabbccddeeff0011223344

timestamp_server Property

The address of the timestamping server.

Syntax

def get_timestamp_server() -> str: ...
def set_timestamp_server(value: str) -> None: ...

timestamp_server = property(get_timestamp_server, set_timestamp_server)

Default Value

""

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the tls_client_chain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256

Subscribe to on_notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

All the parameters are optional.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

""

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

""

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

""

Remarks

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

0

Remarks

Selects renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2Check all provided CRL endpoints for all chain certificates.
crcAllOCSP3Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP4Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL5At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP6At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP7At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce use of client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (not send) signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send handshake message as large batches rather than individually

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

0

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, allow plain data.

tls_use_extended_master_secret Property

Enables Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

user_count Property

The number of records in the User arrays.

Syntax

def get_user_count() -> int: ...
def set_user_count(value: int) -> None: ...

user_count = property(get_user_count, set_user_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at user_count - 1.

user_associated_data Property

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

Syntax

def get_user_associated_data(user_index: int) -> bytes: ...
def set_user_associated_data(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_base_path Property

Base path for this user in the server's file system.

Syntax

def get_user_base_path(user_index: int) -> str: ...
def set_user_base_path(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Base path for this user in the server's file system.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_cert Property

Contains the user's certificate.

Syntax

def get_user_cert(user_index: int) -> bytes: ...
def set_user_cert(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's certificate.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_data Property

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Syntax

def get_user_data(user_index: int) -> str: ...
def set_user_data(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_user_handle(user_index: int) -> int: ...
def set_user_handle(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_hash_algorithm Property

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.

Syntax

def get_user_hash_algorithm(user_index: int) -> str: ...
def set_user_hash_algorithm(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:

SB_MAC_ALGORITHM_HMAC_SHA1SHA1
SB_MAC_ALGORITHM_HMAC_SHA256SHA256
SB_MAC_ALGORITHM_HMAC_SHA512SHA512

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_incoming_speed_limit Property

Specifies the incoming speed limit for this user.

Syntax

def get_user_incoming_speed_limit(user_index: int) -> int: ...
def set_user_incoming_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_outgoing_speed_limit Property

Specifies the outgoing speed limit for this user.

Syntax

def get_user_outgoing_speed_limit(user_index: int) -> int: ...
def set_user_outgoing_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_password Property

The user's authentication password.

Syntax

def get_user_password(user_index: int) -> str: ...
def set_user_password(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The user's authentication password.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_shared_secret Property

Contains the user's secret key, which is essentially a shared secret between the client and server.

Syntax

def get_user_shared_secret(user_index: int) -> bytes: ...
def set_user_shared_secret(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_username Property

The registered name (login) of the user.

Syntax

def get_user_username(user_index: int) -> str: ...
def set_user_username(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The registered name (login) of the user.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

website_name Property

Specifies the web site name to use in the certificate.

Syntax

def get_website_name() -> str: ...
def set_website_name(value: str) -> None: ...

website_name = property(get_website_name, set_website_name)

Default Value

"SecureBlackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

drop_client Method

Terminates a client connection.

Syntax

def drop_client(connection_id: int, forced: bool) -> None: ...

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

list_clients Method

Enumerates the connected clients.

Syntax

def list_clients() -> str: ...

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

pin_client Method

Takes a snapshot of the connection's properties.

Syntax

def pin_client(connection_id: int) -> None: ...

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in pinned_client and pinned_client_chain properties.

start Method

Starts the server.

Syntax

def start() -> None: ...

Remarks

Use this method to activate the server and start listening to incoming connections.

stop Method

Stops the server.

Syntax

def stop() -> None: ...

Remarks

Call this method to stop listening to incoming connections and deactivate the server.

on_accept Event

Reports an incoming connection.

Syntax

class DCAuthWebServerAcceptEventParams(object):
  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_accept() -> Callable[[DCAuthWebServerAcceptEventParams], None]: ...
@on_accept.setter
def on_accept(event_hook: Callable[[DCAuthWebServerAcceptEventParams], None]) -> None: ...

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to on_connect event to be notified of every connection that has been set up.

on_auth_attempt Event

Fires when a connected client makes an authentication attempt.

Syntax

class DCAuthWebServerAuthAttemptEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def http_method() -> str: ...

  @property
  def uri() -> str: ...

  @property
  def auth_method() -> str: ...

  @property
  def username() -> str: ...

  @property
  def password() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_auth_attempt() -> Callable[[DCAuthWebServerAuthAttemptEventParams], None]: ...
@on_auth_attempt.setter
def on_auth_attempt(event_hook: Callable[[DCAuthWebServerAuthAttemptEventParams], None]) -> None: ...

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

ConnectionID contains the unique session identifier for that client, HTTPMethod specifies the HTTP method (GET, POST, etc.) used to access the URI resource, AuthMethod specifies the authentication method, and Username and Password contain the professed credentials.

on_connect Event

Reports an accepted connection.

Syntax

class DCAuthWebServerConnectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

# In class DCAuthWebServer:
@property
def on_connect() -> Callable[[DCAuthWebServerConnectEventParams], None]: ...
@on_connect.setter
def on_connect(event_hook: Callable[[DCAuthWebServerConnectEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as on_get_request or on_auth_attempt.

on_custom_parameters_received Event

Passes custom request parameters to the application.

Syntax

class DCAuthWebServerCustomParametersReceivedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def value() -> str: ...

# In class DCAuthWebServer:
@property
def on_custom_parameters_received() -> Callable[[DCAuthWebServerCustomParametersReceivedEventParams], None]: ...
@on_custom_parameters_received.setter
def on_custom_parameters_received(event_hook: Callable[[DCAuthWebServerCustomParametersReceivedEventParams], None]) -> None: ...

Remarks

Subscribe to this event to access custom signing parameters supplied by the signer in their request. The Value string contains the parameters as included by the requestor.

on_disconnect Event

Fires to report a disconnected client.

Syntax

class DCAuthWebServerDisconnectEventParams(object):
  @property
  def connection_id() -> int: ...

# In class DCAuthWebServer:
@property
def on_disconnect() -> Callable[[DCAuthWebServerDisconnectEventParams], None]: ...
@on_disconnect.setter
def on_disconnect(event_hook: Callable[[DCAuthWebServerDisconnectEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client disconnects.

on_error Event

Information about errors during data delivery.

Syntax

class DCAuthWebServerErrorEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class DCAuthWebServer:
@property
def on_error() -> Callable[[DCAuthWebServerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[DCAuthWebServerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

on_external_sign Event

Handles remote or external signing initiated by the server protocol.

Syntax

class DCAuthWebServerExternalSignEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_external_sign() -> Callable[[DCAuthWebServerExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[DCAuthWebServerExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_key_secret_needed Event

Requests the key secret from the application.

Syntax

class DCAuthWebServerKeySecretNeededEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def key_id() -> str: ...

  @property
  def key_secret() -> str: ...
  @key_secret.setter
  def key_secret(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_key_secret_needed() -> Callable[[DCAuthWebServerKeySecretNeededEventParams], None]: ...
@on_key_secret_needed.setter
def on_key_secret_needed(event_hook: Callable[[DCAuthWebServerKeySecretNeededEventParams], None]) -> None: ...

Remarks

Subscribe to this event to pass the key secret (a pre-shared request authentication code) to the signing component when it is needed. The authentication combination consists of the KeyId, a non-secret unique key identifier, and the KeySecret, shared by the parties, which should be kept private. This event is an alternative for key_secret property. Use it when you expect to process requests from requestors with different KeyIds and secrets. If you only expect to receive requests from a single requestor with a known KeyId, providing the key secret via key_id and key_secret properties would be an easier route.

on_log Event

Reports a single log line.

Syntax

class DCAuthWebServerLogEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def log_type() -> int: ...

  @property
  def details() -> str: ...

# In class DCAuthWebServer:
@property
def on_log() -> Callable[[DCAuthWebServerLogEventParams], None]: ...
@on_log.setter
def on_log(event_hook: Callable[[DCAuthWebServerLogEventParams], None]) -> None: ...

Remarks

This event is fired repeatedly during the component's work to inform the application about the flow of the signing process. The application may use this event to create an operation log.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class DCAuthWebServerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class DCAuthWebServer:
@property
def on_notification() -> Callable[[DCAuthWebServerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[DCAuthWebServerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

on_parameter_received Event

Passes a standard request parameter to the user code.

Syntax

class DCAuthWebServerParameterReceivedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...

# In class DCAuthWebServer:
@property
def on_parameter_received() -> Callable[[DCAuthWebServerParameterReceivedEventParams], None]: ...
@on_parameter_received.setter
def on_parameter_received(event_hook: Callable[[DCAuthWebServerParameterReceivedEventParams], None]) -> None: ...

Remarks

This event is fired when one of 'standard' protocol parameters has been found in the request:

  • SessionID
  • DataURL
  • GoURL
  • Token
  • PKCS11Libraries
  • AllowFileStorage
  • AllowTokenStorage
  • AllowWindowsStorage
  • AllowOSStorage
Parameters are reported one-by-one upon being processed.

on_password_needed Event

Requests a password from the application.

Syntax

class DCAuthWebServerPasswordNeededEventParams(object):
  @property
  def needed_for() -> str: ...

  @property
  def id() -> str: ...

  @property
  def password() -> str: ...
  @password.setter
  def password(value) -> None: ...

  @property
  def cancel() -> bool: ...
  @cancel.setter
  def cancel(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_password_needed() -> Callable[[DCAuthWebServerPasswordNeededEventParams], None]: ...
@on_password_needed.setter
def on_password_needed(event_hook: Callable[[DCAuthWebServerPasswordNeededEventParams], None]) -> None: ...

Remarks

Subscribe to this event to pass a password to the server component. The NeededFor parameter specifies the entity a password for which is being requested (which is typically a certificate). The Id parameter provides the entity's identifier, such as a path to the certificate being loaded. When handling this event, assign the Password to the valid password if you have it; otherwise, set Cancel to true to abort the operation.

on_read_option Event

Fires when the client sends in a read option request.

Syntax

class DCAuthWebServerReadOptionEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...
  @value.setter
  def value(value) -> None: ...

  @property
  def success() -> bool: ...
  @success.setter
  def success(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_read_option() -> Callable[[DCAuthWebServerReadOptionEventParams], None]: ...
@on_read_option.setter
def on_read_option(event_hook: Callable[[DCAuthWebServerReadOptionEventParams], None]) -> None: ...

Remarks

Subscribe to this event to respond to the clients' read option requests. The handler should retrieve the value of the requested option from a local configuration setting and assign it to the Value parameter.

on_select_cert Event

Requests certificate selection criteria from the application.

Syntax

class DCAuthWebServerSelectCertEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def common_name() -> str: ...
  @common_name.setter
  def common_name(value) -> None: ...

  @property
  def key_id() -> str: ...
  @key_id.setter
  def key_id(value) -> None: ...

  @property
  def key_usage() -> str: ...
  @key_usage.setter
  def key_usage(value) -> None: ...

  @property
  def fingerprint() -> str: ...
  @fingerprint.setter
  def fingerprint(value) -> None: ...

  @property
  def store_type() -> str: ...
  @store_type.setter
  def store_type(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_select_cert() -> Callable[[DCAuthWebServerSelectCertEventParams], None]: ...
@on_select_cert.setter
def on_select_cert(event_hook: Callable[[DCAuthWebServerSelectCertEventParams], None]) -> None: ...

Remarks

Subscribe to this event to provide signing certificate details on the fly, right before the hash is signed.

on_sign_request Event

This event signifies the processing of an atomic signing request.

Syntax

class DCAuthWebServerSignRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def method() -> int: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def hash() -> bytes: ...

  @property
  def key_id() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def method_pars() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_sign_request() -> Callable[[DCAuthWebServerSignRequestEventParams], None]: ...
@on_sign_request.setter
def on_sign_request(event_hook: Callable[[DCAuthWebServerSignRequestEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified of every signature request processed by the DC server. Note that any one request coming from the requestor may contain multiple individual signature requests (so-called 'batching'). This event is a good mechanism to track signature requests for accountability purposes, and provide basic access control over the signing operations. The Method parameter specifies the async signing method requested by the client:

asmdPKCS10
asmdPKCS71

The Hash parameter contains the hash, made using HashAlgorithm, that needs to be signed. KeyID contains the key identifier of the requestor.

The Pars string contains a semicolon-separated string of the principal signature parameters. This has the same format and content that is passed to on_external_sign, if it is used. The MethodPars contains a similar parameter string, but for the specific async signing method used. For the PKCS1 method there are no defined method parameters, while the PKCS7 method supports a selection of settings that tune up the CMS blob.

Set Allow to false to reject the request. Use the on_sign_request_completed event to track completion of the initiated operation.

on_sign_request_completed Event

This event signifies completion of the processing of an atomic signing request.

Syntax

class DCAuthWebServerSignRequestCompletedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def method() -> int: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def hash() -> bytes: ...

  @property
  def key_id() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def method_pars() -> str: ...

  @property
  def signature() -> bytes: ...

# In class DCAuthWebServer:
@property
def on_sign_request_completed() -> Callable[[DCAuthWebServerSignRequestCompletedEventParams], None]: ...
@on_sign_request_completed.setter
def on_sign_request_completed(event_hook: Callable[[DCAuthWebServerSignRequestCompletedEventParams], None]) -> None: ...

Remarks

Use this event to track completion of signing request processing. The Hash parameter contains the hash that is signed, as supplied by the requestor, and the Signature parameter contains the resulting cryptographic signature. The Username parameter matches the parameter in on_sign_request event.

on_timestamp_request Event

Fires when the class is ready to request a timestamp from an external TSA.

Syntax

class DCAuthWebServerTimestampRequestEventParams(object):
  @property
  def tsa() -> str: ...

  @property
  def timestamp_request() -> str: ...

  @property
  def timestamp_response() -> str: ...
  @timestamp_response.setter
  def timestamp_response(value) -> None: ...

  @property
  def suppress_default() -> bool: ...
  @suppress_default.setter
  def suppress_default(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_timestamp_request() -> Callable[[DCAuthWebServerTimestampRequestEventParams], None]: ...
@on_timestamp_request.setter
def on_timestamp_request(event_hook: Callable[[DCAuthWebServerTimestampRequestEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to timestamp_server property. Set SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

on_tls_cert_validate Event

Fires when a client certificate needs to be validated.

Syntax

class DCAuthWebServerTLSCertValidateEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_tls_cert_validate() -> Callable[[DCAuthWebServerTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[DCAuthWebServerTLSCertValidateEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

on_tls_established Event

Reports the setup of a TLS session.

Syntax

class DCAuthWebServerTLSEstablishedEventParams(object):
  @property
  def connection_id() -> int: ...

# In class DCAuthWebServer:
@property
def on_tls_established() -> Callable[[DCAuthWebServerTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[DCAuthWebServerTLSEstablishedEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

on_tls_handshake Event

Fires when a newly established client connection initiates a TLS handshake.

Syntax

class DCAuthWebServerTLSHandshakeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def server_name() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_tls_handshake() -> Callable[[DCAuthWebServerTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[DCAuthWebServerTLSHandshakeEventParams], None]) -> None: ...

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

on_tls_psk Event

Requests a pre-shared key for TLS-PSK.

Syntax

class DCAuthWebServerTLSPSKEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def identity() -> str: ...

  @property
  def psk() -> str: ...
  @psk.setter
  def psk(value) -> None: ...

  @property
  def ciphersuite() -> str: ...
  @ciphersuite.setter
  def ciphersuite(value) -> None: ...

# In class DCAuthWebServer:
@property
def on_tls_psk() -> Callable[[DCAuthWebServerTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[DCAuthWebServerTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

on_tls_shutdown Event

Reports closure of a TLS session.

Syntax

class DCAuthWebServerTLSShutdownEventParams(object):
  @property
  def connection_id() -> int: ...

# In class DCAuthWebServer:
@property
def on_tls_shutdown() -> Callable[[DCAuthWebServerTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[DCAuthWebServerTLSShutdownEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a on_disconnect, which marks the closure of the underlying TCP session.

on_write_option Event

Fires when the client sends in a write option request.

Syntax

class DCAuthWebServerWriteOptionEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...

# In class DCAuthWebServer:
@property
def on_write_option() -> Callable[[DCAuthWebServerWriteOptionEventParams], None]: ...
@on_write_option.setter
def on_write_option(event_hook: Callable[[DCAuthWebServerWriteOptionEventParams], None]) -> None: ...

Remarks

Subscribe to this event to respond to the clients' write option requests. The handler should save the Value of the Name option to a local configuration database.

DCAuthWebServer Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

Base Config Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

DCAuthWebServer Errors