WebSocketServer Class

Properties Methods Events Config Settings Errors

The WebSocketServer class provides the server-side functionality of the WebSocket protocol.

Syntax

class secureblackbox.WebSocketServer

Remarks

Use this component to accept secure WebSocket connections in your application.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


active	Indicates whether the server is active and is listening to new connections.
bound_port	Indicates the bound listening port.
client_auth	Enables or disables certificate-based client authentication.
error_origin	Indicates the endpoint where the error originates from.
error_severity	The severity of the error that happened.
external_crypto_async_document_id	Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
external_crypto_custom_params	Custom parameters to be passed to the signing service (uninterpreted).
external_crypto_data	Additional data to be included in the async state and mirrored back by the requestor.
external_crypto_external_hash_calculation	Specifies whether the message hash is to be calculated at the external endpoint.
external_crypto_hash_algorithm	Specifies the request's signature hash algorithm.
external_crypto_key_id	The ID of the pre-shared key used for DC request authentication.
external_crypto_key_secret	The pre-shared key used for DC request authentication.
external_crypto_method	Specifies the asynchronous signing method.
external_crypto_mode	Specifies the external cryptography mode.
external_crypto_public_key_algorithm	Provide the public key algorithm here if the certificate is not available on the pre-signing stage.
fips_mode	Reserved.
handshake_timeout	Specifies the handshake timeout in milliseconds.
host	The host to bind the listening port to.
pinned_client_address	The client's IP address.
pinned_client_chain_validation_details	The details of a certificate chain validation outcome.
pinned_client_chain_validation_result	The outcome of a certificate chain validation routine.
pinned_client_ciphersuite	The cipher suite employed by this connection.
pinned_client_client_authenticated	Specifies whether client authentication was performed during this connection.
pinned_client_digest_algorithm	The digest algorithm used in a TLS-enabled connection.
pinned_client_encryption_algorithm	The symmetric encryption algorithm used in a TLS-enabled connection.
pinned_client_id	The client connection's unique identifier.
pinned_client_key_exchange_algorithm	The key exchange algorithm used in a TLS-enabled connection.
pinned_client_key_exchange_key_bits	The length of the key exchange key of a TLS-enabled connection.
pinned_client_named_ec_curve	The elliptic curve used in this connection.
pinned_client_pfs_cipher	Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
pinned_client_port	The remote port of the client connection.
pinned_client_pre_shared_identity	Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
pinned_client_public_key_bits	The length of the public key.
pinned_client_resumed_session	Indicates whether a TLS-enabled connection was spawned from another TLS connection.
pinned_client_secure_connection	Indicates whether TLS or SSL is enabled for this connection.
pinned_client_signature_algorithm	The signature algorithm used in a TLS handshake.
pinned_client_symmetric_block_size	The block size of the symmetric algorithm used.
pinned_client_symmetric_key_bits	The key length of the symmetric algorithm used.
pinned_client_total_bytes_received	The total number of bytes received over this connection.
pinned_client_total_bytes_sent	The total number of bytes sent over this connection.
pinned_client_validation_log	Contains the server certificate's chain validation log.
pinned_client_version	Indicates the version of SSL/TLS protocol negotiated during this connection.
pinned_client_cert_count	The number of records in the PinnedClientCert arrays.
pinned_client_cert_bytes	Returns the raw certificate data in DER format.
pinned_client_cert_ca_key_id	A unique identifier (fingerprint) of the CA certificate's private key.
pinned_client_cert_fingerprint	Contains the fingerprint (a hash imprint) of this certificate.
pinned_client_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
pinned_client_cert_issuer	The common name of the certificate issuer (CA), typically a company name.
pinned_client_cert_issuer_rdn	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
pinned_client_cert_key_algorithm	Specifies the public key algorithm of this certificate.
pinned_client_cert_key_bits	Returns the length of the public key.
pinned_client_cert_key_fingerprint	Returns a fingerprint of the public key contained in the certificate.
pinned_client_cert_key_usage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
pinned_client_cert_public_key_bytes	Contains the certificate's public key in DER format.
pinned_client_cert_self_signed	Indicates whether the certificate is self-signed (root) or signed by an external CA.
pinned_client_cert_serial_number	Returns the certificate's serial number.
pinned_client_cert_sig_algorithm	Indicates the algorithm that was used by the CA to sign this certificate.
pinned_client_cert_subject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
pinned_client_cert_subject_key_id	Contains a unique identifier (fingerprint) of the certificate's private key.
pinned_client_cert_subject_rdn	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
pinned_client_cert_valid_from	The time point at which the certificate becomes valid, in UTC.
pinned_client_cert_valid_to	The time point at which the certificate expires, in UTC.
port	Specifies the port number to listen for connections on.
port_range_from	Specifies the lower limit of the listening port range for incoming connections.
port_range_to	Specifies the upper limit of the listening port range for incoming connections.
server_cert_count	The number of records in the ServerCert arrays.
server_cert_bytes	Returns the raw certificate data in DER format.
server_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
session_timeout	Specifies the default session timeout value in milliseconds.
socket_incoming_speed_limit	The maximum number of bytes to read from the socket, per second.
socket_local_address	The local network interface to bind the socket to.
socket_local_port	The local port number to bind the socket to.
socket_outgoing_speed_limit	The maximum number of bytes to write to the socket, per second.
socket_timeout	The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
socket_use_ipv6	Enables or disables IP protocol version 6.
tls_auto_validate_certificates	Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
tls_base_configuration	Selects the base configuration for the TLS settings.
tls_ciphersuites	A list of ciphersuites separated with commas or semicolons.
tls_ec_curves	Defines the elliptic curves to enable.
tls_extensions	Provides access to TLS extensions.
tls_force_resume_if_destination_changes	Whether to force TLS session resumption when the destination address changes.
tls_pre_shared_identity	Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
tls_pre_shared_key	Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
tls_pre_shared_key_ciphersuite	Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
tls_renegotiation_attack_prevention_mode	Selects the renegotiation attack prevention mechanism.
tls_revocation_check	Specifies the kind(s) of revocation check to perform.
tls_ssl_options	Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
tls_tls_mode	Specifies the TLS mode to use.
tls_use_extended_master_secret	Enables the Extended Master Secret Extension, as defined in RFC 7627.
tls_use_session_resumption	Enables or disables the TLS session resumption capability.
tls_versions	The SSL/TLS versions to enable by default.
user_count	The number of records in the User arrays.
user_associated_data	Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.
user_base_path	Base path for this user in the server's file system.
user_cert	Contains the user's certificate.
user_data	Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.
user_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
user_hash_algorithm	Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.
user_incoming_speed_limit	Specifies the incoming speed limit for this user.
user_outgoing_speed_limit	Specifies the outgoing speed limit for this user.
user_password	The user's authentication password.
user_shared_secret	Contains the user's secret key, which is essentially a shared secret between the client and server.
user_username	The registered name (login) of the user.
website_name	Specifies the web site name to use in the certificate.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


config	Sets or retrieves a configuration setting.
do_action	Performs an additional action.
drop_client	Terminates a client connection.
list_clients	Enumerates the connected clients.
pin_client	Takes a snapshot of the connection's properties.
send_data	Sends a piece of binary data to the client.
send_keep_alive	Sends a keep-alive message.
send_text	Sends a piece of text data to the client.
set_response_bytes	Sets a byte array to be served as a response.
set_response_status	Sets an HTTP status to be sent with the response.
set_response_string	Sets a string to be served as a response.
start	Starts the server.
stop	Stops the server.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


on_accept	Reports an incoming connection.
on_auth_attempt	Fires when a connected client makes an authentication attempt.
on_binary_data	Passes a received chunk of binary data to the application.
on_connect	Reports an accepted connection.
on_data	Supplies a data chunk received within a POST or PUT upload.
on_disconnect	Fires to report a disconnected client.
on_error	Information about errors during data delivery.
on_external_sign	Handles remote or external signing initiated by the server protocol.
on_get_request	Reports a GET request.
on_keep_alive_response	Reports a response to a keep-alive message.
on_notification	This event notifies the application about an underlying control flow event.
on_text_data	Passes a received chunk of text data to the application.
on_tls_cert_validate	Fires when a client certificate needs to be validated.
on_tls_established	Reports the setup of a TLS session.
on_tls_handshake	Fires when a newly established client connection initiates a TLS handshake.
on_tls_psk	Requests a pre-shared key for TLS-PSK.
on_tls_shutdown	Reports closure of a TLS session.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


AllowOptionsResponseWithoutAuth	Enables unauthenticated responses to OPTIONS requests.
ClientAuth	Enables or disables certificate-based client authentication.
DualStack	Allows the use of ip4 and ip6 simultaneously.
HomePage	Specifies the home page resource name.
Host	The host to bind to.
RequestFilter	The request string modifier.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
WebsiteName	The website name for the TLS certificate.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the class.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolver	Specifies whether the client classes should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

active Property

Indicates whether the server is active and is listening to new connections.

Syntax

def get_active() -> bool: ...

active = property(get_active, None)

Default Value

FALSE

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only.

bound_port Property

Indicates the bound listening port.

Syntax

def get_bound_port() -> int: ...

bound_port = property(get_bound_port, None)

Default Value

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals port if it is provided, or is allocated dynamically if configured to fall in the range between port_range_from and port_range_to constraints.

This property is read-only.

client_auth Property

Enables or disables certificate-based client authentication.

Syntax

def get_client_auth() -> int: ...
def set_client_auth(value: int) -> None: ...

client_auth = property(get_client_auth, set_client_auth)

Default Value

Remarks

Set this property to true to tune up the client authentication type: ccatNoAuth = 0; ccatRequestCert = 1; ccatRequireCert = 2;

error_origin Property

Indicates the endpoint where the error originates from.

Syntax

def get_error_origin() -> int: ...
def set_error_origin(value: int) -> None: ...

error_origin = property(get_error_origin, set_error_origin)

Default Value

Remarks

Use this property to establish whether the reported error originates from a local or remote endpoint.


eoLocal	`0`
eoRemote	`1`

error_severity Property

The severity of the error that happened.

Syntax

def get_error_severity() -> int: ...
def set_error_severity(value: int) -> None: ...

error_severity = property(get_error_severity, set_error_severity)

Default Value

Remarks

Use this property to establish whether the error is fatal.


esWarning	`1`
esFatal	`2`

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

Remarks

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

external_crypto_public_key_algorithm Property

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

handshake_timeout Property

Specifies the handshake timeout in milliseconds.

Syntax

def get_handshake_timeout() -> int: ...
def set_handshake_timeout(value: int) -> None: ...

handshake_timeout = property(get_handshake_timeout, set_handshake_timeout)

Default Value

20000

Remarks

Use this property to set the TLS handshake timeout.

host Property

The host to bind the listening port to.

Syntax

def get_host() -> str: ...
def set_host(value: str) -> None: ...

host = property(get_host, set_host)

Default Value

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

pinned_client_address Property

The client's IP address.

Syntax

def get_pinned_client_address() -> str: ...

pinned_client_address = property(get_pinned_client_address, None)

Default Value

Remarks

The client's IP address.

This property is read-only.

pinned_client_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_pinned_client_chain_validation_details() -> int: ...

pinned_client_chain_validation_details = property(get_pinned_client_chain_validation_details, None)

Default Value

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is read-only.

pinned_client_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_pinned_client_chain_validation_result() -> int: ...

pinned_client_chain_validation_result = property(get_pinned_client_chain_validation_result, None)

Default Value

Remarks

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

pinned_client_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_pinned_client_ciphersuite() -> str: ...

pinned_client_ciphersuite = property(get_pinned_client_ciphersuite, None)

Default Value

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

pinned_client_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_pinned_client_client_authenticated() -> bool: ...

pinned_client_client_authenticated = property(get_pinned_client_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

pinned_client_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_digest_algorithm() -> str: ...

pinned_client_digest_algorithm = property(get_pinned_client_digest_algorithm, None)

Default Value

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_encryption_algorithm() -> str: ...

pinned_client_encryption_algorithm = property(get_pinned_client_encryption_algorithm, None)

Default Value

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_id Property

The client connection's unique identifier.

Syntax

def get_pinned_client_id() -> int: ...

pinned_client_id = property(get_pinned_client_id, None)

Default Value

-1

Remarks

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

This property is read-only.

pinned_client_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_algorithm() -> str: ...

pinned_client_key_exchange_algorithm = property(get_pinned_client_key_exchange_algorithm, None)

Default Value

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_key_bits() -> int: ...

pinned_client_key_exchange_key_bits = property(get_pinned_client_key_exchange_key_bits, None)

Default Value

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

pinned_client_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_pinned_client_named_ec_curve() -> str: ...

pinned_client_named_ec_curve = property(get_pinned_client_named_ec_curve, None)

Default Value

Remarks

The elliptic curve used in this connection.

This property is read-only.

pinned_client_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_pinned_client_pfs_cipher() -> bool: ...

pinned_client_pfs_cipher = property(get_pinned_client_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

pinned_client_port Property

The remote port of the client connection.

Syntax

def get_pinned_client_port() -> int: ...

pinned_client_port = property(get_pinned_client_port, None)

Default Value

Remarks

The remote port of the client connection.

This property is read-only.

pinned_client_pre_shared_identity Property

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_pinned_client_pre_shared_identity() -> str: ...

pinned_client_pre_shared_identity = property(get_pinned_client_pre_shared_identity, None)

Default Value

Remarks

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is read-only.

pinned_client_public_key_bits Property

The length of the public key.

Syntax

def get_pinned_client_public_key_bits() -> int: ...

pinned_client_public_key_bits = property(get_pinned_client_public_key_bits, None)

Default Value

Remarks

The length of the public key.

This property is read-only.

pinned_client_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_pinned_client_resumed_session() -> bool: ...

pinned_client_resumed_session = property(get_pinned_client_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

pinned_client_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_pinned_client_secure_connection() -> bool: ...

pinned_client_secure_connection = property(get_pinned_client_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

pinned_client_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_pinned_client_signature_algorithm() -> str: ...

pinned_client_signature_algorithm = property(get_pinned_client_signature_algorithm, None)

Default Value

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

pinned_client_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_block_size() -> int: ...

pinned_client_symmetric_block_size = property(get_pinned_client_symmetric_block_size, None)

Default Value

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

pinned_client_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_key_bits() -> int: ...

pinned_client_symmetric_key_bits = property(get_pinned_client_symmetric_key_bits, None)

Default Value

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

pinned_client_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_pinned_client_total_bytes_received() -> int: ...

pinned_client_total_bytes_received = property(get_pinned_client_total_bytes_received, None)

Default Value

Remarks

The total number of bytes received over this connection.

This property is read-only.

pinned_client_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_pinned_client_total_bytes_sent() -> int: ...

pinned_client_total_bytes_sent = property(get_pinned_client_total_bytes_sent, None)

Default Value

Remarks

The total number of bytes sent over this connection.

This property is read-only.

pinned_client_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_pinned_client_validation_log() -> str: ...

pinned_client_validation_log = property(get_pinned_client_validation_log, None)

Default Value

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

pinned_client_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_pinned_client_version() -> str: ...

pinned_client_version = property(get_pinned_client_version, None)

Default Value

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

pinned_client_cert_count Property

The number of records in the PinnedClientCert arrays.

Syntax

def get_pinned_client_cert_count() -> int: ...

pinned_client_cert_count = property(get_pinned_client_cert_count, None)

Default Value

Remarks

This property controls the size of the following arrays:

pinned_client_cert_bytes
pinned_client_cert_ca_key_id
pinned_client_cert_fingerprint
pinned_client_cert_handle
pinned_client_cert_issuer
pinned_client_cert_issuer_rdn
pinned_client_cert_key_algorithm
pinned_client_cert_key_bits
pinned_client_cert_key_fingerprint
pinned_client_cert_key_usage
pinned_client_cert_public_key_bytes
pinned_client_cert_self_signed
pinned_client_cert_serial_number
pinned_client_cert_sig_algorithm
pinned_client_cert_subject
pinned_client_cert_subject_key_id
pinned_client_cert_subject_rdn
pinned_client_cert_valid_from
pinned_client_cert_valid_to

The array indices start at 0 and end at pinned_client_cert_count - 1.

This property is read-only.

pinned_client_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_pinned_client_cert_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

def get_pinned_client_cert_ca_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_pinned_client_cert_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_pinned_client_cert_handle(pinned_client_cert_index: int) -> int: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_pinned_client_cert_issuer(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

def get_pinned_client_cert_issuer_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_pinned_client_cert_key_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_bits Property

Returns the length of the public key.

Syntax

def get_pinned_client_cert_key_bits(pinned_client_cert_index: int) -> int: ...

Default Value

Remarks

Returns the length of the public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_fingerprint Property

Returns a fingerprint of the public key contained in the certificate.

Syntax

def get_pinned_client_cert_key_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns a fingerprint of the public key contained in the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_pinned_client_cert_key_usage(pinned_client_cert_index: int) -> int: ...

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_pinned_client_cert_public_key_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_pinned_client_cert_self_signed(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_pinned_client_cert_serial_number(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_pinned_client_cert_sig_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_pinned_client_cert_subject(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_key_id Property

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

def get_pinned_client_cert_subject_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

def get_pinned_client_cert_subject_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_pinned_client_cert_valid_from(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_pinned_client_cert_valid_to(pinned_client_cert_index: int) -> str: ...

Default Value

Remarks

The time point at which the certificate expires, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

port Property

Specifies the port number to listen for connections on.

Syntax

def get_port() -> int: ...
def set_port(value: int) -> None: ...

port = property(get_port, set_port)

Default Value

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via port_range_from and port_range_to properties. In this case the port will be allocated within the requested range by the operating system, and reported in bound_port.

port_range_from Property

Specifies the lower limit of the listening port range for incoming connections.

Syntax

def get_port_range_from() -> int: ...
def set_port_range_from(value: int) -> None: ...

port_range_from = property(get_port_range_from, set_port_range_from)

Default Value

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and reported in bound_port.

Note that this property is ignored if the port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

port_range_to Property

Specifies the upper limit of the listening port range for incoming connections.

Syntax

def get_port_range_to() -> int: ...
def set_port_range_to(value: int) -> None: ...

port_range_to = property(get_port_range_to, set_port_range_to)

Default Value

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and reported in bound_port.

Note that this property is ignored if the port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

server_cert_count Property

The number of records in the ServerCert arrays.

Syntax

def get_server_cert_count() -> int: ...
def set_server_cert_count(value: int) -> None: ...

server_cert_count = property(get_server_cert_count, set_server_cert_count)

Default Value

Remarks

This property controls the size of the following arrays:

server_cert_bytes
server_cert_handle

The array indices start at 0 and end at server_cert_count - 1.

server_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_server_cert_bytes(server_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_server_cert_handle(server_cert_index: int) -> int: ...
def set_server_cert_handle(server_cert_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

session_timeout Property

Specifies the default session timeout value in milliseconds.

Syntax

def get_session_timeout() -> int: ...
def set_session_timeout(value: int) -> None: ...

session_timeout = property(get_session_timeout, set_session_timeout)

Default Value

360000

Remarks

Specifies the period of inactivity (in milliseconds) after which the connection will be terminated by the server.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by tls_base_configuration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects the renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

Remarks

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

Remarks

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

tls_use_extended_master_secret Property

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables the TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables the TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

Remarks

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

user_count Property

The number of records in the User arrays.

Syntax

def get_user_count() -> int: ...
def set_user_count(value: int) -> None: ...

user_count = property(get_user_count, set_user_count)

Default Value

Remarks

This property controls the size of the following arrays:

user_associated_data
user_base_path
user_cert
user_data
user_handle
user_hash_algorithm
user_incoming_speed_limit
user_outgoing_speed_limit
user_password
user_shared_secret
user_username

The array indices start at 0 and end at user_count - 1.

user_associated_data Property

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

Syntax

def get_user_associated_data(user_index: int) -> bytes: ...
def set_user_associated_data(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_base_path Property

Base path for this user in the server's file system.

Syntax

def get_user_base_path(user_index: int) -> str: ...
def set_user_base_path(user_index: int, value: str) -> None: ...

Default Value

Remarks

Base path for this user in the server's file system.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_cert Property

Contains the user's certificate.

Syntax

def get_user_cert(user_index: int) -> bytes: ...
def set_user_cert(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's certificate.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_data Property

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Syntax

def get_user_data(user_index: int) -> str: ...
def set_user_data(user_index: int, value: str) -> None: ...

Default Value

Remarks

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_user_handle(user_index: int) -> int: ...
def set_user_handle(user_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_hash_algorithm Property

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.

Syntax

def get_user_hash_algorithm(user_index: int) -> str: ...
def set_user_hash_algorithm(user_index: int, value: str) -> None: ...

Default Value

Remarks

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:


SB_MAC_ALGORITHM_HMAC_SHA1	`SHA1`
SB_MAC_ALGORITHM_HMAC_SHA256	`SHA256`
SB_MAC_ALGORITHM_HMAC_SHA512	`SHA512`

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_incoming_speed_limit Property

Specifies the incoming speed limit for this user.

Syntax

def get_user_incoming_speed_limit(user_index: int) -> int: ...
def set_user_incoming_speed_limit(user_index: int, value: int) -> None: ...

Default Value

Remarks

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_outgoing_speed_limit Property

Specifies the outgoing speed limit for this user.

Syntax

def get_user_outgoing_speed_limit(user_index: int) -> int: ...
def set_user_outgoing_speed_limit(user_index: int, value: int) -> None: ...

Default Value

Remarks

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_password Property

The user's authentication password.

Syntax

def get_user_password(user_index: int) -> str: ...
def set_user_password(user_index: int, value: str) -> None: ...

Default Value

Remarks

The user's authentication password.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_shared_secret Property

Contains the user's secret key, which is essentially a shared secret between the client and server.

Syntax

def get_user_shared_secret(user_index: int) -> bytes: ...
def set_user_shared_secret(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_username Property

The registered name (login) of the user.

Syntax

def get_user_username(user_index: int) -> str: ...
def set_user_username(user_index: int, value: str) -> None: ...

Default Value

Remarks

The registered name (login) of the user.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

website_name Property

Specifies the web site name to use in the certificate.

Syntax

def get_website_name() -> str: ...
def set_website_name(value: str) -> None: ...

website_name = property(get_website_name, set_website_name)

Default Value

"SecureBlackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

drop_client Method

Terminates a client connection.

Syntax

def drop_client(connection_id: int, forced: bool) -> None: ...

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

list_clients Method

Enumerates the connected clients.

Syntax

def list_clients() -> str: ...

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

pin_client Method

Takes a snapshot of the connection's properties.

Syntax

def pin_client(connection_id: int) -> None: ...

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in pinned_client and pinned_client_chain properties.

send_data Method

Sends a piece of binary data to the client.

Syntax

def send_data(connection_id: int, buffer: bytes) -> None: ...

Remarks

Use this method to send a piece of binary data to the client.

send_keep_alive Method

Sends a keep-alive message.

Syntax

def send_keep_alive(connection_id: int) -> bool: ...

Remarks

Use this method to send a keep-alive 'ping' to the client. The response, if it comes back, will be reported via the on_keep_alive_response event.

Keep-alive messages provide good means for keeping the connection alive and stay immune to timeouts.

send_text Method

Sends a piece of text data to the client.

Syntax

def send_text(connection_id: int, text: str) -> None: ...

Remarks

Use this method to send a piece of text data to the client.

set_response_bytes Method

Sets a byte array to be served as a response.

Syntax

def set_response_bytes(connection_id: int, bytes: bytes, content_type: str, response_filter: str) -> None: ...

Remarks

Use this property to provide the response content in a byte array. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:


parts[Index]	The body of a particular part of a multipart response.

set_response_status Method

Sets an HTTP status to be sent with the response.

Syntax

def set_response_status(connection_id: int, status_code: int) -> None: ...

Remarks

Use this method to set an HTTP status for the request. A good place to call this method is a request-marking event, such as on_get_request.

set_response_string Method

Sets a string to be served as a response.

Syntax

def set_response_string(connection_id: int, data_str: str, content_type: str, response_filter: str) -> None: ...

Remarks

Use this property to provide the response content in a string. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:


parts[Index]	The body of a particular part of a multipart response.

start Method

Starts the server.

Syntax

def start() -> None: ...

Remarks

Use this method to activate the server and start listening to incoming connections.

stop Method

Stops the server.

Syntax

def stop() -> None: ...

Remarks

Call this method to stop listening to incoming connections and deactivate the server.

on_accept Event

Reports an incoming connection.

Syntax

class WebSocketServerAcceptEventParams(object):
  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebSocketServer:
@property
def on_accept() -> Callable[[WebSocketServerAcceptEventParams], None]: ...
@on_accept.setter
def on_accept(event_hook: Callable[[WebSocketServerAcceptEventParams], None]) -> None: ...

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to on_connect event to be notified of every connection that has been set up.

on_auth_attempt Event

Fires when a connected client makes an authentication attempt.

Syntax

class WebSocketServerAuthAttemptEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def http_method() -> str: ...

  @property
  def uri() -> str: ...

  @property
  def auth_method() -> str: ...

  @property
  def username() -> str: ...

  @property
  def password() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

# In class WebSocketServer:
@property
def on_auth_attempt() -> Callable[[WebSocketServerAuthAttemptEventParams], None]: ...
@on_auth_attempt.setter
def on_auth_attempt(event_hook: Callable[[WebSocketServerAuthAttemptEventParams], None]) -> None: ...

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

ConnectionID contains the unique session identifier for that client, HTTPMethod specifies the HTTP method (GET, POST, etc.) used to access the URI resource, AuthMethod specifies the authentication method, and Username and Password contain the professed credentials.

on_binary_data Event

Passes a received chunk of binary data to the application.

Syntax

class WebSocketServerBinaryDataEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def buffer() -> bytes: ...

  @property
  def last() -> bool: ...

# In class WebSocketServer:
@property
def on_binary_data() -> Callable[[WebSocketServerBinaryDataEventParams], None]: ...
@on_binary_data.setter
def on_binary_data(event_hook: Callable[[WebSocketServerBinaryDataEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly to pass incoming pieces of binary data to the application. The Last parameter indicates that this is the last chunk.

on_connect Event

Reports an accepted connection.

Syntax

class WebSocketServerConnectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

# In class WebSocketServer:
@property
def on_connect() -> Callable[[WebSocketServerConnectEventParams], None]: ...
@on_connect.setter
def on_connect(event_hook: Callable[[WebSocketServerConnectEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as on_get_request or on_auth_attempt.

on_data Event

Supplies a data chunk received within a POST or PUT upload.

Syntax

class WebSocketServerDataEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def buffer() -> bytes: ...

# In class WebSocketServer:
@property
def on_data() -> Callable[[WebSocketServerDataEventParams], None]: ...
@on_data.setter
def on_data(event_hook: Callable[[WebSocketServerDataEventParams], None]) -> None: ...

Remarks

This event is fired to supply another piece of data received within a POST or PUT upload operation. This event may fire multiple times during a single request upload to pass the uploaded data to the application chunk-by-chunk.

on_disconnect Event

Fires to report a disconnected client.

Syntax

class WebSocketServerDisconnectEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebSocketServer:
@property
def on_disconnect() -> Callable[[WebSocketServerDisconnectEventParams], None]: ...
@on_disconnect.setter
def on_disconnect(event_hook: Callable[[WebSocketServerDisconnectEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client disconnects.

on_error Event

Information about errors during data delivery.

Syntax

class WebSocketServerErrorEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebSocketServer:
@property
def on_error() -> Callable[[WebSocketServerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[WebSocketServerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

on_external_sign Event

Handles remote or external signing initiated by the server protocol.

Syntax

class WebSocketServerExternalSignEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class WebSocketServer:
@property
def on_external_sign() -> Callable[[WebSocketServerExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[WebSocketServerExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_get_request Event

Reports a GET request.

Syntax

class WebSocketServerGetRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def uri() -> str: ...

  @property
  def handled() -> bool: ...
  @handled.setter
  def handled(value) -> None: ...

# In class WebSocketServer:
@property
def on_get_request() -> Callable[[WebSocketServerGetRequestEventParams], None]: ...
@on_get_request.setter
def on_get_request(event_hook: Callable[[WebSocketServerGetRequestEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a GET request received from the client.

ConnectionID indicates the connection that sent the request and URI suggests the requested resource.

Set Handled to true to indicate that your application's code will take care of the request. The application does it by providing the necessary details via set_response_status, set_response_header, set_response_file or set_response_string methods. If the returned value of Handled is false, the server will try to take care of the request automatically by searching for the requested resource in document_root.

on_keep_alive_response Event

Reports a response to a keep-alive message.

Syntax

class WebSocketServerKeepAliveResponseEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebSocketServer:
@property
def on_keep_alive_response() -> Callable[[WebSocketServerKeepAliveResponseEventParams], None]: ...
@on_keep_alive_response.setter
def on_keep_alive_response(event_hook: Callable[[WebSocketServerKeepAliveResponseEventParams], None]) -> None: ...

Remarks

This event is triggered when a response to a previously sent keep-alive message is received.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class WebSocketServerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class WebSocketServer:
@property
def on_notification() -> Callable[[WebSocketServerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[WebSocketServerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


Open	This event is fired when a new websocket connection is established. The EventParam parameter contains the following connection setup parameters: ConnectionId, QueryString, Key, SubProtocol, and Extensions. The ConnectionId parameter corresponds to the connection ID used in other events and method of the component, whereas the reamining parameters are taken from the connection negotiation request and its HTTP headers.
Close	This event is fired when a client connection is closed. The EventParam parameter contains the ConnectionId parameter.

on_text_data Event

Passes a received chunk of text data to the application.

Syntax

class WebSocketServerTextDataEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def text() -> str: ...

  @property
  def last() -> bool: ...

# In class WebSocketServer:
@property
def on_text_data() -> Callable[[WebSocketServerTextDataEventParams], None]: ...
@on_text_data.setter
def on_text_data(event_hook: Callable[[WebSocketServerTextDataEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly to pass incoming pieces of text data to the application. The Last parameter indicates that this is the last chunk.

on_tls_cert_validate Event

Fires when a client certificate needs to be validated.

Syntax

class WebSocketServerTLSCertValidateEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebSocketServer:
@property
def on_tls_cert_validate() -> Callable[[WebSocketServerTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[WebSocketServerTLSCertValidateEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

on_tls_established Event

Reports the setup of a TLS session.

Syntax

class WebSocketServerTLSEstablishedEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebSocketServer:
@property
def on_tls_established() -> Callable[[WebSocketServerTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[WebSocketServerTLSEstablishedEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

on_tls_handshake Event

Fires when a newly established client connection initiates a TLS handshake.

Syntax

class WebSocketServerTLSHandshakeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def server_name() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class WebSocketServer:
@property
def on_tls_handshake() -> Callable[[WebSocketServerTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[WebSocketServerTLSHandshakeEventParams], None]) -> None: ...

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

on_tls_psk Event

Requests a pre-shared key for TLS-PSK.

Syntax

class WebSocketServerTLSPSKEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def identity() -> str: ...

  @property
  def psk() -> str: ...
  @psk.setter
  def psk(value) -> None: ...

  @property
  def ciphersuite() -> str: ...
  @ciphersuite.setter
  def ciphersuite(value) -> None: ...

# In class WebSocketServer:
@property
def on_tls_psk() -> Callable[[WebSocketServerTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[WebSocketServerTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

on_tls_shutdown Event

Reports closure of a TLS session.

Syntax

class WebSocketServerTLSShutdownEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebSocketServer:
@property
def on_tls_shutdown() -> Callable[[WebSocketServerTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[WebSocketServerTLSShutdownEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a on_disconnect, which marks the closure of the underlying TCP session.

WebSocketServer Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

WebSocketServer Config Settings

AllowOptionsResponseWithoutAuth: Enables unauthenticated responses to OPTIONS requests.

Set this property to true to allow the server serve OPTIONS requests without prior authentication of the client.

ClientAuth: Enables or disables certificate-based client authentication.

Set this property to one of the below values to tune up the client authentication logic:


0		No client authentication (the default setting)
1		Request certificates. The server will ask connecting clients for their certificates. Non-authenticated client connections will be accepted anyway.
2		Require certificates. The server will ask connecting clients for their certificates. If a client fails to provide a certificate, the server will terminate the connection.

If this property is set to 1 or 2, the component will request certificates from the connecting clients. Depending on the setting, the clients that fail to provide their certificate in response will be allowed or disallowed to proceed with the connection. The server signals about a received certificate by firing its on_certificate_validate event. Use pin_client method in the event handler to pin the client details, and access the provided certificate chain via the pinned_client_chain property.

Note that this event is fired from the connecting clients threads, so please make sure you avoid bottlenecks in the event handler and put appropriate thread safety measures in place.

Unlike the client-side components, the server component does not perform automated certificate validation against the local security policy. You must perform appropriate certificate validation steps in your on_certificate_validate event handler.

DualStack: Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

HomePage: Specifies the home page resource name.

Use this property to specify the home page (/) resource name.

Host: The host to bind to.

Specifies a specific interface the server should listen on.

RequestFilter: The request string modifier.

Use this property to tune up the request string as returned by GetRequestString method. Supported filters: params (request parameters only), params[Index] or params['Name'] (a specific request parameter), parts[Index] (the contents of a particular part of a multipart message). An empty request filter makes GetRequestString return the whole body of the request.

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

WebsiteName: The website name for the TLS certificate.

Assign this property with a name to put in a self-generated TLS certificate.

Base Config Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

WebSocketServer Errors


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Class is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)