WebDAVServer Class

Properties   Methods   Events   Config Settings   Errors  

The WebDAVServer class offers server-side functionality for the WebDAV protocol.

Syntax

class secureblackbox.WebDAVServer

Remarks

Both plain (HTTP) and secure (HTTPS) connection types are supported.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

active Property

Indicates whether the server is active and is listening to new connections.

Syntax

def get_active() -> bool: ...

active = property(get_active, None)

Default Value

FALSE

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only.

auth_basic Property

Enables or disables basic authentication.

Syntax

def get_auth_basic() -> bool: ...
def set_auth_basic(value: bool) -> None: ...

auth_basic = property(get_auth_basic, set_auth_basic)

Default Value

FALSE

Remarks

Use this property to enable or disable basic user authentication in the HTTP server.

auth_digest Property

Enables or disables digest authentication.

Syntax

def get_auth_digest() -> bool: ...
def set_auth_digest(value: bool) -> None: ...

auth_digest = property(get_auth_digest, set_auth_digest)

Default Value

FALSE

Remarks

Use this property to enable or disable digest-based user authentication in the HTTP server.

auth_digest_expire Property

Specifies digest expiration time for digest authentication.

Syntax

def get_auth_digest_expire() -> int: ...
def set_auth_digest_expire(value: int) -> None: ...

auth_digest_expire = property(get_auth_digest_expire, set_auth_digest_expire)

Default Value

20

Remarks

Use this property to specify the digest expiration time for digest authentication, in seconds.

auth_realm Property

Specifies authentication realm for digest and NTLM authentication.

Syntax

def get_auth_realm() -> str: ...
def set_auth_realm(value: str) -> None: ...

auth_realm = property(get_auth_realm, set_auth_realm)

Default Value

"SecureBlackbox"

Remarks

Specifies authentication realm for digest and NTLM authentication types.

bound_port Property

Indicates the bound listening port.

Syntax

def get_bound_port() -> int: ...

bound_port = property(get_bound_port, None)

Default Value

0

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals port if it is provided, or is allocated dynamically if configured to fall in the range between port_range_from and port_range_to constraints.

This property is read-only.

client_auth Property

Enables or disables certificate-based client authentication.

Syntax

def get_client_auth() -> int: ...
def set_client_auth(value: int) -> None: ...

client_auth = property(get_client_auth, set_client_auth)

Default Value

0

Remarks

Set this property to true to tune up the client authentication type: ccatNoAuth = 0; ccatRequestCert = 1; ccatRequireCert = 2;

client_file_entry_a_time Property

Contains the last access time for this object, in UTC.

Syntax

def get_client_file_entry_a_time() -> str: ...
def set_client_file_entry_a_time(value: str) -> None: ...

client_file_entry_a_time = property(get_client_file_entry_a_time, set_client_file_entry_a_time)

Default Value

""

Remarks

Contains the last access time for this object, in UTC.

client_file_entry_content_type Property

The object's content type.

Syntax

def get_client_file_entry_content_type() -> str: ...
def set_client_file_entry_content_type(value: str) -> None: ...

client_file_entry_content_type = property(get_client_file_entry_content_type, set_client_file_entry_content_type)

Default Value

""

Remarks

The object's content type.

client_file_entry_c_time Property

Contains this object's creation time, in UTC.

Syntax

def get_client_file_entry_c_time() -> str: ...
def set_client_file_entry_c_time(value: str) -> None: ...

client_file_entry_c_time = property(get_client_file_entry_c_time, set_client_file_entry_c_time)

Default Value

""

Remarks

Contains this object's creation time, in UTC.

client_file_entry_directory Property

Specifies whether this object is a directory.

Syntax

def get_client_file_entry_directory() -> bool: ...
def set_client_file_entry_directory(value: bool) -> None: ...

client_file_entry_directory = property(get_client_file_entry_directory, set_client_file_entry_directory)

Default Value

FALSE

Remarks

Specifies whether this object is a directory.

client_file_entry_display_name Property

Contains the display name of the object.

Syntax

def get_client_file_entry_display_name() -> str: ...
def set_client_file_entry_display_name(value: str) -> None: ...

client_file_entry_display_name = property(get_client_file_entry_display_name, set_client_file_entry_display_name)

Default Value

""

Remarks

Contains the display name of the object.

client_file_entry_e_tag Property

An e-tag of the object.

Syntax

def get_client_file_entry_e_tag() -> str: ...
def set_client_file_entry_e_tag(value: str) -> None: ...

client_file_entry_e_tag = property(get_client_file_entry_e_tag, set_client_file_entry_e_tag)

Default Value

""

Remarks

An e-tag of the object.

client_file_entry_full_url Property

A full path to the object.

Syntax

def get_client_file_entry_full_url() -> str: ...
def set_client_file_entry_full_url(value: str) -> None: ...

client_file_entry_full_url = property(get_client_file_entry_full_url, set_client_file_entry_full_url)

Default Value

""

Remarks

A full path to the object.

client_file_entry_m_time Property

The last modification time of the object, in UTC.

Syntax

def get_client_file_entry_m_time() -> str: ...
def set_client_file_entry_m_time(value: str) -> None: ...

client_file_entry_m_time = property(get_client_file_entry_m_time, set_client_file_entry_m_time)

Default Value

""

Remarks

The last modification time of the object, in UTC.

client_file_entry_parent_url Property

Specifies the object's parent URL.

Syntax

def get_client_file_entry_parent_url() -> str: ...
def set_client_file_entry_parent_url(value: str) -> None: ...

client_file_entry_parent_url = property(get_client_file_entry_parent_url, set_client_file_entry_parent_url)

Default Value

""

Remarks

Specifies the object's parent URL.

client_file_entry_size Property

The size of the object in bytes.

Syntax

def get_client_file_entry_size() -> int: ...
def set_client_file_entry_size(value: int) -> None: ...

client_file_entry_size = property(get_client_file_entry_size, set_client_file_entry_size)

Default Value

0

Remarks

The size of the object in bytes.

client_file_entry_supports_exclusive_lock Property

Indicates whether the entry supports exclusive locking.

Syntax

def get_client_file_entry_supports_exclusive_lock() -> bool: ...
def set_client_file_entry_supports_exclusive_lock(value: bool) -> None: ...

client_file_entry_supports_exclusive_lock = property(get_client_file_entry_supports_exclusive_lock, set_client_file_entry_supports_exclusive_lock)

Default Value

FALSE

Remarks

Indicates whether the entry supports exclusive locking.

client_file_entry_supports_shared_lock Property

Indicates whether the entry supports shared lock.

Syntax

def get_client_file_entry_supports_shared_lock() -> bool: ...
def set_client_file_entry_supports_shared_lock(value: bool) -> None: ...

client_file_entry_supports_shared_lock = property(get_client_file_entry_supports_shared_lock, set_client_file_entry_supports_shared_lock)

Default Value

FALSE

Remarks

Indicates whether the entry supports shared lock.

client_file_entry_url Property

A URL of the object.

Syntax

def get_client_file_entry_url() -> str: ...
def set_client_file_entry_url(value: str) -> None: ...

client_file_entry_url = property(get_client_file_entry_url, set_client_file_entry_url)

Default Value

""

Remarks

A URL of the object.

document_root Property

The document root of the server.

Syntax

def get_document_root() -> str: ...
def set_document_root(value: str) -> None: ...

document_root = property(get_document_root, set_document_root)

Default Value

""

Remarks

Use this property to specify a local folder which is going to be the server's document root (the mount point of the virtual home directory).

error_origin Property

Indicates the endpoint where the error originates from.

Syntax

def get_error_origin() -> int: ...
def set_error_origin(value: int) -> None: ...

error_origin = property(get_error_origin, set_error_origin)

Default Value

0

Remarks

Use this property to establish whether the reported error originates from a local or remote endpoint.

error_severity Property

The severity of the error that happened.

Syntax

def get_error_severity() -> int: ...
def set_error_severity(value: int) -> None: ...

error_severity = property(get_error_severity, set_error_severity)

Default Value

1

Remarks

Use this property to establish whether the error is fatal.

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by all components. In particular, components operating with larger objects (PDFSigner, CAdESSigner, XAdESSigner) do not support it.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides extra protection layer for the protocol and diminishes the risk of private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

external_crypto_public_key_algorithm Property

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

""

Remarks

Provide public key algorithm here if the certificate is not available on the pre-signing stage.

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

host Property

The host to bind the listening port to.

Syntax

def get_host() -> str: ...
def set_host(value: str) -> None: ...

host = property(get_host, set_host)

Default Value

""

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

metadata_flush_timeout Property

Specifies metadata flush timeout.

Syntax

def get_metadata_flush_timeout() -> int: ...
def set_metadata_flush_timeout(value: int) -> None: ...

metadata_flush_timeout = property(get_metadata_flush_timeout, set_metadata_flush_timeout)

Default Value

600

Remarks

Use this property to specify metadata flush timeout in seconds.

metadata_root Property

The metadata directory root.

Syntax

def get_metadata_root() -> str: ...
def set_metadata_root(value: str) -> None: ...

metadata_root = property(get_metadata_root, set_metadata_root)

Default Value

""

Remarks

The metadata directory is a dedicated location for storing properties of the files served by the WebDAVServer.

pinned_client_address Property

The client's IP address.

Syntax

def get_pinned_client_address() -> str: ...

pinned_client_address = property(get_pinned_client_address, None)

Default Value

""

Remarks

The client's IP address.

This property is read-only.

pinned_client_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_pinned_client_chain_validation_details() -> int: ...

pinned_client_chain_validation_details = property(get_pinned_client_chain_validation_details, None)

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest what reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only.

pinned_client_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_pinned_client_chain_validation_result() -> int: ...

pinned_client_chain_validation_result = property(get_pinned_client_chain_validation_result, None)

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

pinned_client_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_pinned_client_ciphersuite() -> str: ...

pinned_client_ciphersuite = property(get_pinned_client_ciphersuite, None)

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

pinned_client_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_pinned_client_client_authenticated() -> bool: ...

pinned_client_client_authenticated = property(get_pinned_client_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

pinned_client_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_digest_algorithm() -> str: ...

pinned_client_digest_algorithm = property(get_pinned_client_digest_algorithm, None)

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_encryption_algorithm() -> str: ...

pinned_client_encryption_algorithm = property(get_pinned_client_encryption_algorithm, None)

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_id Property

The client connection's unique identifier.

Syntax

def get_pinned_client_id() -> int: ...

pinned_client_id = property(get_pinned_client_id, None)

Default Value

-1

Remarks

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

This property is read-only.

pinned_client_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_algorithm() -> str: ...

pinned_client_key_exchange_algorithm = property(get_pinned_client_key_exchange_algorithm, None)

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_key_bits() -> int: ...

pinned_client_key_exchange_key_bits = property(get_pinned_client_key_exchange_key_bits, None)

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

pinned_client_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_pinned_client_named_ec_curve() -> str: ...

pinned_client_named_ec_curve = property(get_pinned_client_named_ec_curve, None)

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only.

pinned_client_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_pinned_client_pfs_cipher() -> bool: ...

pinned_client_pfs_cipher = property(get_pinned_client_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

pinned_client_port Property

The remote port of the client connection.

Syntax

def get_pinned_client_port() -> int: ...

pinned_client_port = property(get_pinned_client_port, None)

Default Value

0

Remarks

The remote port of the client connection.

This property is read-only.

pinned_client_pre_shared_identity Property

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_pinned_client_pre_shared_identity() -> str: ...

pinned_client_pre_shared_identity = property(get_pinned_client_pre_shared_identity, None)

Default Value

""

Remarks

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is read-only.

pinned_client_public_key_bits Property

The length of the public key.

Syntax

def get_pinned_client_public_key_bits() -> int: ...

pinned_client_public_key_bits = property(get_pinned_client_public_key_bits, None)

Default Value

0

Remarks

The length of the public key.

This property is read-only.

pinned_client_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_pinned_client_resumed_session() -> bool: ...

pinned_client_resumed_session = property(get_pinned_client_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

pinned_client_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_pinned_client_secure_connection() -> bool: ...

pinned_client_secure_connection = property(get_pinned_client_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

pinned_client_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_pinned_client_signature_algorithm() -> str: ...

pinned_client_signature_algorithm = property(get_pinned_client_signature_algorithm, None)

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

pinned_client_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_block_size() -> int: ...

pinned_client_symmetric_block_size = property(get_pinned_client_symmetric_block_size, None)

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

pinned_client_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_key_bits() -> int: ...

pinned_client_symmetric_key_bits = property(get_pinned_client_symmetric_key_bits, None)

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

pinned_client_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_pinned_client_total_bytes_received() -> int: ...

pinned_client_total_bytes_received = property(get_pinned_client_total_bytes_received, None)

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only.

pinned_client_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_pinned_client_total_bytes_sent() -> int: ...

pinned_client_total_bytes_sent = property(get_pinned_client_total_bytes_sent, None)

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only.

pinned_client_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_pinned_client_validation_log() -> str: ...

pinned_client_validation_log = property(get_pinned_client_validation_log, None)

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

pinned_client_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_pinned_client_version() -> str: ...

pinned_client_version = property(get_pinned_client_version, None)

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

pinned_client_cert_count Property

The number of records in the PinnedClientCert arrays.

Syntax

def get_pinned_client_cert_count() -> int: ...

pinned_client_cert_count = property(get_pinned_client_cert_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• pinned_client_cert_bytes
• pinned_client_cert_ca
• pinned_client_cert_ca_key_id
• pinned_client_cert_crl_distribution_points
• pinned_client_cert_curve
• pinned_client_cert_fingerprint
• pinned_client_cert_friendly_name
• pinned_client_cert_handle
• pinned_client_cert_hash_algorithm
• pinned_client_cert_issuer
• pinned_client_cert_issuer_rdn
• pinned_client_cert_key_algorithm
• pinned_client_cert_key_bits
• pinned_client_cert_key_fingerprint
• pinned_client_cert_key_usage
• pinned_client_cert_key_valid
• pinned_client_cert_ocsp_locations
• pinned_client_cert_ocsp_no_check
• pinned_client_cert_origin
• pinned_client_cert_policy_i_ds
• pinned_client_cert_private_key_bytes
• pinned_client_cert_private_key_exists
• pinned_client_cert_private_key_extractable
• pinned_client_cert_public_key_bytes
• pinned_client_cert_qualified_statements
• pinned_client_cert_self_signed
• pinned_client_cert_serial_number
• pinned_client_cert_sig_algorithm
• pinned_client_cert_subject
• pinned_client_cert_subject_alternative_name
• pinned_client_cert_subject_key_id
• pinned_client_cert_subject_rdn
• pinned_client_cert_valid_from
• pinned_client_cert_valid_to

The array indices start at 0 and end at pinned_client_cert_count - 1.

This property is read-only.

pinned_client_cert_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_pinned_client_cert_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns raw certificate data in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ca Property

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

Syntax

def get_pinned_client_cert_ca(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate has a CA capability (a setting in BasicConstraints extension).

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

def get_pinned_client_cert_ca_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_crl_distribution_points Property

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

Syntax

def get_pinned_client_cert_crl_distribution_points(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Locations of the CRL (Certificate Revocation List) distribution points used to check this certificate's validity.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_curve Property

Specifies the elliptic curve of the EC public key.

Syntax

def get_pinned_client_cert_curve(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Specifies the elliptic curve of the EC public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_pinned_client_cert_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_friendly_name Property

Contains an associated alias (friendly name) of the certificate.

Syntax

def get_pinned_client_cert_friendly_name(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Contains an associated alias (friendly name) of the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_pinned_client_cert_handle(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_hash_algorithm Property

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing) SB_HASH_ALGORITHM_SHA1 SHA1 SB_HASH_ALGORITHM_SHA224 SHA224 SB_HASH_ALGORITHM_SHA256 SHA256 SB_HASH_ALGORITHM_SHA384 SHA384 SB_HASH_ALGORITHM_SHA512 SHA512 SB_HASH_ALGORITHM_MD2 MD2 SB_HASH_ALGORITHM_MD4 MD4 SB_HASH_ALGORITHM_MD5 MD5 SB_HASH_ALGORITHM_RIPEMD160 RIPEMD160 SB_HASH_ALGORITHM_CRC32 CRC32 SB_HASH_ALGORITHM_SSL3 SSL3 SB_HASH_ALGORITHM_GOST_R3411_1994 GOST1994 SB_HASH_ALGORITHM_WHIRLPOOL WHIRLPOOL SB_HASH_ALGORITHM_POLY1305 POLY1305 SB_HASH_ALGORITHM_SHA3_224 SHA3_224 SB_HASH_ALGORITHM_SHA3_256 SHA3_256 SB_HASH_ALGORITHM_SHA3_384 SHA3_384 SB_HASH_ALGORITHM_SHA3_512 SHA3_512 SB_HASH_ALGORITHM_BLAKE2S_128 BLAKE2S_128 SB_HASH_ALGORITHM_BLAKE2S_160 BLAKE2S_160 SB_HASH_ALGORITHM_BLAKE2S_224 BLAKE2S_224 SB_HASH_ALGORITHM_BLAKE2S_256 BLAKE2S_256 SB_HASH_ALGORITHM_BLAKE2B_160 BLAKE2B_160 SB_HASH_ALGORITHM_BLAKE2B_256 BLAKE2B_256 SB_HASH_ALGORITHM_BLAKE2B_384 BLAKE2B_384 SB_HASH_ALGORITHM_BLAKE2B_512 BLAKE2B_512 SB_HASH_ALGORITHM_SHAKE_128 SHAKE_128 SB_HASH_ALGORITHM_SHAKE_256 SHAKE_256 SB_HASH_ALGORITHM_SHAKE_128_LEN SHAKE_128_LEN SB_HASH_ALGORITHM_SHAKE_256_LEN SHAKE_256_LEN .

Syntax

def get_pinned_client_cert_hash_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Specifies the hash algorithm to be used in the operations on the certificate (such as key signing)

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_pinned_client_cert_issuer(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

def get_pinned_client_cert_issuer_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_pinned_client_cert_key_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_bits Property

Returns the length of the public key.

Syntax

def get_pinned_client_cert_key_bits(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the length of the public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_fingerprint Property

Returns a fingerprint of the public key contained in the certificate.

Syntax

def get_pinned_client_cert_key_fingerprint(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns a fingerprint of the public key contained in the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_pinned_client_cert_key_usage(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_valid Property

Returns True if the certificate's key is cryptographically valid, and False otherwise.

Syntax

def get_pinned_client_cert_key_valid(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Returns True if the certificate's key is cryptographically valid, and False otherwise.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ocsp_locations Property

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

Syntax

def get_pinned_client_cert_ocsp_locations(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Locations of OCSP (Online Certificate Status Protocol) services that can be used to check this certificate's validity, as recorded by the CA.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ocsp_no_check Property

Accessor to the value of the certificates ocsp-no-check extension.

Syntax

def get_pinned_client_cert_ocsp_no_check(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Accessor to the value of the certificates ocsp-no-check extension.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_origin Property

Returns the origin of this certificate.

Syntax

def get_pinned_client_cert_origin(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the origin of this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_policy_i_ds Property

Contains identifiers (OIDs) of the applicable certificate policies.

Syntax

def get_pinned_client_cert_policy_i_ds(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_private_key_bytes Property

Contains the certificate's private key.

Syntax

def get_pinned_client_cert_private_key_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's private key. It is normal for this property to be empty if the private key is non-exportable.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_private_key_exists Property

Indicates whether the certificate has an associated private key.

Syntax

def get_pinned_client_cert_private_key_exists(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate has an associated private key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_private_key_extractable Property

Indicates whether the private key is extractable.

Syntax

def get_pinned_client_cert_private_key_extractable(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the private key is extractable

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_pinned_client_cert_public_key_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_qualified_statements Property

Returns the qualified status of the certificate.

Syntax

def get_pinned_client_cert_qualified_statements(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the qualified status of the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_pinned_client_cert_self_signed(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_pinned_client_cert_serial_number(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_pinned_client_cert_sig_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_pinned_client_cert_subject(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_alternative_name Property

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Syntax

def get_pinned_client_cert_subject_alternative_name(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Returns or sets the value of the Subject Alternative Name extension of the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_key_id Property

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

def get_pinned_client_cert_subject_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

def get_pinned_client_cert_subject_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_pinned_client_cert_valid_from(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_pinned_client_cert_valid_to(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

port Property

Specifies the port number to listen for connections on.

Syntax

def get_port() -> int: ...
def set_port(value: int) -> None: ...

port = property(get_port, set_port)

Default Value

80

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via port_range_from and port_range_to properties. In this case the port will be allocated within the requested range by the operating system, and repored in bound_port.

port_range_from Property

Specifies the lower limit of the listening port range for incoming connections.

Syntax

def get_port_range_from() -> int: ...
def set_port_range_from(value: int) -> None: ...

port_range_from = property(get_port_range_from, set_port_range_from)

Default Value

0

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and repored in bound_port.

port_range_to Property

Specifies the upper limit of the listening port range for incoming connections.

Syntax

def get_port_range_to() -> int: ...
def set_port_range_to(value: int) -> None: ...

port_range_to = property(get_port_range_to, set_port_range_to)

Default Value

0

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via port), the port will be allocated within the requested range by the operating system, and repored in bound_port.

server_cert_count Property

The number of records in the ServerCert arrays.

Syntax

def get_server_cert_count() -> int: ...
def set_server_cert_count(value: int) -> None: ...

server_cert_count = property(get_server_cert_count, set_server_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• server_cert_bytes
• server_cert_handle

The array indices start at 0 and end at server_cert_count - 1.

server_cert_bytes Property

Returns raw certificate data in DER format.

Syntax

def get_server_cert_bytes(server_cert_index: int) -> bytes: ...

Remarks

Returns raw certificate data in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_server_cert_handle(server_cert_index: int) -> int: ...
def set_server_cert_handle(server_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

""

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

0

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are on offer, tuned up for different purposes, such as high security or higher compatibility.

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases that allow to blanketly enable or disable all ciphersuites at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

""

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

""

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

""

Remarks

Contains the pre-shared for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

0

Remarks

Selects renegotiation attack prevention mechanism.

The following options are available:

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to faster OCSP route and only demand one source to succeed) is a good choice for most of typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

0

Remarks

Specifies the TLS mode to use.

tls_use_extended_master_secret Property

Enables Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

user_count Property

The number of records in the User arrays.

Syntax

def get_user_count() -> int: ...
def set_user_count(value: int) -> None: ...

user_count = property(get_user_count, set_user_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• user_associated_data
• user_base_path
• user_cert
• user_data
• user_handle
• user_hash_algorithm
• user_incoming_speed_limit
• user_otp_algorithm
• user_otp_value
• user_outgoing_speed_limit
• user_password
• user_password_len
• user_shared_secret
• user_ssh_key
• user_username

The array indices start at 0 and end at user_count - 1.

user_associated_data Property

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

Syntax

def get_user_associated_data(user_index: int) -> bytes: ...
def set_user_associated_data(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_base_path Property

Base path for this user in the server's file system.

Syntax

def get_user_base_path(user_index: int) -> str: ...
def set_user_base_path(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Base path for this user in the server's file system.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_cert Property

Contains the user's certificate.

Syntax

def get_user_cert(user_index: int) -> bytes: ...
def set_user_cert(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's certificate.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_data Property

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Syntax

def get_user_data(user_index: int) -> str: ...
def set_user_data(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_user_handle(user_index: int) -> int: ...
def set_user_handle(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_hash_algorithm Property

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.

Syntax

def get_user_hash_algorithm(user_index: int) -> str: ...
def set_user_hash_algorithm(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_incoming_speed_limit Property

Specifies the incoming speed limit for this user.

Syntax

def get_user_incoming_speed_limit(user_index: int) -> int: ...
def set_user_incoming_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_otp_algorithm Property

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP).

Syntax

def get_user_otp_algorithm(user_index: int) -> int: ...
def set_user_otp_algorithm(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP). In the former case, a value of a dedicated counter is used to generate a unique password, while in the latter the password is generated on the basis of the current time value.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_otp_value Property

The user's time interval (TOTP) or Counter (HOTP).

Syntax

def get_user_otp_value(user_index: int) -> int: ...
def set_user_otp_value(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

The user's time interval (TOTP) or Counter (HOTP).

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_outgoing_speed_limit Property

Specifies the outgoing speed limit for this user.

Syntax

def get_user_outgoing_speed_limit(user_index: int) -> int: ...
def set_user_outgoing_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_password Property

The user's authentication password.

Syntax

def get_user_password(user_index: int) -> str: ...
def set_user_password(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The user's authentication password.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_password_len Property

Specifies the length of the user's OTP password.

Syntax

def get_user_password_len(user_index: int) -> int: ...
def set_user_password_len(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the length of the user's OTP password.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_shared_secret Property

Contains the user's secret key, which is essentially a shared secret between the client and server.

Syntax

def get_user_shared_secret(user_index: int) -> bytes: ...
def set_user_shared_secret(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_ssh_key Property

Contains the user's SSH key.

Syntax

def get_user_ssh_key(user_index: int) -> bytes: ...
def set_user_ssh_key(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's SSH key.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_username Property

The registered name (login) of the user.

Syntax

def get_user_username(user_index: int) -> str: ...
def set_user_username(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The registered name (login) of the user.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

website_name Property

Specifies the web site name to use in the certificate.

Syntax

def get_website_name() -> str: ...
def set_website_name(value: str) -> None: ...

website_name = property(get_website_name, set_website_name)

Default Value

"SecureBlackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insencitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

drop_client Method

Terminates a client connection.

Syntax

def drop_client(connection_id: int, forced: bool) -> None: ...

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

get_client_buffer Method

Obtains a pending connection buffer.

Syntax

def get_client_buffer(connection_id: int) -> bytes: ...

Remarks

Use this method to obtain a pending connection buffer from your on_write_file event handler. The connection buffer contains data that have been received from the client but has not been written to the file yet.

get_request_bytes Method

Returns the contents of the client's HTTP request.

Syntax

def get_request_bytes(connection_id: int, request_filter: str) -> bytes: ...

Remarks

Use this method to get the body of the client's HTTP request in your on_custom_request event handler. Note that the body of GET and HEAD requests is empty. The method returns the requested content.

The RequestFilter parameter allows you to select the element(s) that you would like to get. An empty request filter makes the whole body to be returned. The following request filters are currently supported:

get_request_header Method

Returns a request header value.

Syntax

def get_request_header(connection_id: int, header_name: str) -> str: ...

Remarks

Use this method to get the value of a request header. A good place to call this method is a request-marking event, such as on_before_lock_object or on_custom_request.

get_request_string Method

Returns the contents of the client's HTTP request.

Syntax

def get_request_string(connection_id: int, request_filter: str) -> str: ...

Remarks

Use this method to get the body of the client's HTTP request to a string. Note that the body of GET and HEAD requests is empty.

The RequestFilter parameter allows you to select the element(s) of the requests that you would like to get. An empty request filter makes the whole body to be returned. The following request filters are currently supported:

get_request_username Method

Returns the username for a connection.

Syntax

def get_request_username(connection_id: int) -> str: ...

Remarks

Use this method to obtain a username for an active connection. The method will return an empty string if no authentication has been performed on the connection.

get_response_header Method

Returns a response header value.

Syntax

def get_response_header(connection_id: int, header_name: str) -> str: ...

Remarks

Use this method to get the value of a response header. A good place to call this method is on_headers_prepared event. Call the method with empty HeaderName to get the whole response header.

list_clients Method

Enumerates the connected clients.

Syntax

def list_clients() -> str: ...

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

pin_client Method

Takes a snapshot of the connection's properties.

Syntax

def pin_client(connection_id: int) -> None: ...

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in pinned_client and pinned_client_chain properties.

process_generic_request Method

Processes a generic HTTP request.

Syntax

def process_generic_request(connection_id: int, request_bytes: bytes) -> bytes: ...

Remarks

This method processes a generic HTTP request and produces a response. Use it to generate HTTP responses for requests obtained externally, out of the default HTTP channel.

This method respects all current settings of the server object, and invokes the corresponding events to consult about the request and response details with the application. ConnectionId allows to identify the request in the events.

The method returns the complete HTTP response including HTTP headers.

set_client_buffer Method

Commits a data buffer to the connection.

Syntax

def set_client_buffer(connection_id: int, value: bytes) -> None: ...

Remarks

Use this method from your on_read_file event handler to commit a chunk of file data to the server component.

set_client_file_entry Method

Commits a file entry to the connection.

Syntax

def set_client_file_entry(connection_id: int) -> None: ...

Remarks

Use this method to commit a file details entry provided in client_file_entry property to ConnectionID connection. This method is supposed to be used from a on_find_next event handler.

Please note that events like on_find_next may be invoked concurrently for several connection threads. Please make sure you use a locking mechanism to avoid mixing up details in client_file_entry.

set_response_bytes Method

Sets a byte array to be served as a response.

Syntax

def set_response_bytes(connection_id: int, bytes: bytes, content_type: str, response_filter: str) -> None: ...

Remarks

Use this property to provide the response content in a byte array when serving custom requests in your on_custom_request handler. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:

set_response_file Method

Sets a file to be served as a response.

Syntax

def set_response_file(connection_id: int, file_name: str, content_type: str, response_filter: str) -> None: ...

Remarks

Use this property to provide the response content in a file. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:

set_response_header Method

Sets a response header.

Syntax

def set_response_header(connection_id: int, header_name: str, value: str) -> bool: ...

Remarks

Use this method to set a response header. A good place to call this method is a request-marking event, such as on_lock_object or on_custom_request.

set_response_status Method

Sets an HTTP status to be sent with the response.

Syntax

def set_response_status(connection_id: int, status_code: int) -> None: ...

Remarks

Use this method to set an HTTP status for the request. A good place to call this method is a request-marking event, such as on_custom_request.

set_response_string Method

Sets a string to be served as a response.

Syntax

def set_response_string(connection_id: int, data_str: str, content_type: str, response_filter: str) -> None: ...

Remarks

Use this property to provide the response content in a string. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:

start Method

Starts the server.

Syntax

def start() -> None: ...

Remarks

Use this method to activate the server and start listening to incoming connections.

stop Method

Stops the server.

Syntax

def stop() -> None: ...

Remarks

Call this method to stop listening to incoming connections and deactivate the server.

on_accept Event

Reports an incoming connection.

Syntax

class WebDAVServerAcceptEventParams(object):
  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebDAVServer:
@property
def on_accept() -> Callable[[WebDAVServerAcceptEventParams], None]: ...
@on_accept.setter
def on_accept(event_hook: Callable[[WebDAVServerAcceptEventParams], None]) -> None: ...

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to on_connect event to be notified of every connection that has been set up.

on_after_browse Event

WebDAVServer uses this event to notify the application about the completion of the browsing operation.

Syntax

class WebDAVServerAfterBrowseEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_browse() -> Callable[[WebDAVServerAfterBrowseEventParams], None]: ...
@on_after_browse.setter
def on_after_browse(event_hook: Callable[[WebDAVServerAfterBrowseEventParams], None]) -> None: ...

Remarks

The ConnectionID parameter identifies the client connection, and the Path parameter specifies the browsing path.

This event is typically fired after the on_before_browse event.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_copy_object Event

This event notifies the application about the completion of the copy operation.

Syntax

class WebDAVServerAfterCopyObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_copy_object() -> Callable[[WebDAVServerAfterCopyObjectEventParams], None]: ...
@on_after_copy_object.setter
def on_after_copy_object(event_hook: Callable[[WebDAVServerAfterCopyObjectEventParams], None]) -> None: ...

Remarks

AfterCopyObject is typically preceded by on_before_copy_object and on_copy_object events. The OldPath and NewPath parameters contain the origin and destination names of the copied object.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_create_calendar Event

This event reports the completion of calendar creation request.

Syntax

class WebDAVServerAfterCreateCalendarEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_create_calendar() -> Callable[[WebDAVServerAfterCreateCalendarEventParams], None]: ...
@on_after_create_calendar.setter
def on_after_create_calendar(event_hook: Callable[[WebDAVServerAfterCreateCalendarEventParams], None]) -> None: ...

Remarks

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_create_collection Event

WebDAVServer uses this event to report completion of the collection creation operation.

Syntax

class WebDAVServerAfterCreateCollectionEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_create_collection() -> Callable[[WebDAVServerAfterCreateCollectionEventParams], None]: ...
@on_after_create_collection.setter
def on_after_create_collection(event_hook: Callable[[WebDAVServerAfterCreateCollectionEventParams], None]) -> None: ...

Remarks

This event is preceded by on_before_create_collection and on_create_collection events. It lets you alter the operation status passed back to the client.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_custom_request Event

This event reports the completion of the custom request.

Syntax

class WebDAVServerAfterCustomRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def request_method() -> str: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_custom_request() -> Callable[[WebDAVServerAfterCustomRequestEventParams], None]: ...
@on_after_custom_request.setter
def on_after_custom_request(event_hook: Callable[[WebDAVServerAfterCustomRequestEventParams], None]) -> None: ...

Remarks

Use this event to track the completion of an earlier reported custom request and adjust the operation status through the OperationStatus parameter as required.

on_after_lock_object Event

Reports the completion of the object locking operation.

Syntax

class WebDAVServerAfterLockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_lock_object() -> Callable[[WebDAVServerAfterLockObjectEventParams], None]: ...
@on_after_lock_object.setter
def on_after_lock_object(event_hook: Callable[[WebDAVServerAfterLockObjectEventParams], None]) -> None: ...

Remarks

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_refresh_lock Event

Reports the completion of the lock refresh operation.

Syntax

class WebDAVServerAfterRefreshLockEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_refresh_lock() -> Callable[[WebDAVServerAfterRefreshLockEventParams], None]: ...
@on_after_refresh_lock.setter
def on_after_refresh_lock(event_hook: Callable[[WebDAVServerAfterRefreshLockEventParams], None]) -> None: ...

Remarks

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_remove_object Event

This event notifies the application about the completion of object deletion operation.

Syntax

class WebDAVServerAfterRemoveObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_remove_object() -> Callable[[WebDAVServerAfterRemoveObjectEventParams], None]: ...
@on_after_remove_object.setter
def on_after_remove_object(event_hook: Callable[[WebDAVServerAfterRemoveObjectEventParams], None]) -> None: ...

Remarks

This event follows on_before_remove_object and on_remove_object events. It is fired upon completion of the operation and lets you adjust the operation status if required:

on_after_rename_object Event

The class uses this event to notify the application about the completion of the object rename operation.

Syntax

class WebDAVServerAfterRenameObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_rename_object() -> Callable[[WebDAVServerAfterRenameObjectEventParams], None]: ...
@on_after_rename_object.setter
def on_after_rename_object(event_hook: Callable[[WebDAVServerAfterRenameObjectEventParams], None]) -> None: ...

Remarks

The OldPath and NewPath provide the old and new path of the renamed object respectively.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_set_attributes Event

WebDAVServer fires this event to notify the application of the completion of the attribute assignment operation.

Syntax

class WebDAVServerAfterSetAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_set_attributes() -> Callable[[WebDAVServerAfterSetAttributesEventParams], None]: ...
@on_after_set_attributes.setter
def on_after_set_attributes(event_hook: Callable[[WebDAVServerAfterSetAttributesEventParams], None]) -> None: ...

Remarks

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_after_unlock_object Event

Notifies the application about the completion of the object unlocking operation.

Syntax

class WebDAVServerAfterUnlockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_after_unlock_object() -> Callable[[WebDAVServerAfterUnlockObjectEventParams], None]: ...
@on_after_unlock_object.setter
def on_after_unlock_object(event_hook: Callable[[WebDAVServerAfterUnlockObjectEventParams], None]) -> None: ...

Remarks

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_auth_attempt Event

Fires when a connected client makes an authentication attempt.

Syntax

class WebDAVServerAuthAttemptEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def http_method() -> str: ...

  @property
  def uri() -> str: ...

  @property
  def auth_method() -> str: ...

  @property
  def username() -> str: ...

  @property
  def password() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

# In class WebDAVServer:
@property
def on_auth_attempt() -> Callable[[WebDAVServerAuthAttemptEventParams], None]: ...
@on_auth_attempt.setter
def on_auth_attempt(event_hook: Callable[[WebDAVServerAuthAttemptEventParams], None]) -> None: ...

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

ConnectionID contains the unique session identifier for that client, HTTPMethod specifies the HTTP method (GET, POST, etc.) used to access the URI resource, AuthMethod specifies the authentication method, and Username and Password contain the professed credentials.

on_before_browse Event

Fires when a Browse request is received.

Syntax

class WebDAVServerBeforeBrowseEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_browse() -> Callable[[WebDAVServerBeforeBrowseEventParams], None]: ...
@on_before_browse.setter
def on_before_browse(event_hook: Callable[[WebDAVServerBeforeBrowseEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application that a Browse request has been received from the client. The Path parameter contains the path parameter from the request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a series of events that request the details of the object residing at Path: on_list_attributes, on_list_sub_objects, and on_read_attribute.

on_before_copy_object Event

Fires when a Copy Object request is received.

Syntax

class WebDAVServerBeforeCopyObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_copy_object() -> Callable[[WebDAVServerBeforeCopyObjectEventParams], None]: ...
@on_before_copy_object.setter
def on_before_copy_object(event_hook: Callable[[WebDAVServerBeforeCopyObjectEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application that a Copy Object request was received. The OldPath and NewPath parameters specify the source and destination paths for the object to be copied. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_copy_object call, allowing you to virtualize the copy operation.

on_before_create_calendar Event

Fires when a Create Calendar request is received from a client.

Syntax

class WebDAVServerBeforeCreateCalendarEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_create_calendar() -> Callable[[WebDAVServerBeforeCreateCalendarEventParams], None]: ...
@on_before_create_calendar.setter
def on_before_create_calendar(event_hook: Callable[[WebDAVServerBeforeCreateCalendarEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received Create Calendar request. The Path parameter specifies the location of the new calendar. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_create_calendar call, allowing you to virtualize the calendar creation operation.

on_before_create_collection Event

Fires when a Create Collection request is received from a client.

Syntax

class WebDAVServerBeforeCreateCollectionEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_create_collection() -> Callable[[WebDAVServerBeforeCreateCollectionEventParams], None]: ...
@on_before_create_collection.setter
def on_before_create_collection(event_hook: Callable[[WebDAVServerBeforeCreateCollectionEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about an incoming collection creation request. The Path parameter advises on the location of the new collection. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_create_collection call.

on_before_custom_request Event

Notifies the application about an incoming custom request.

Syntax

class WebDAVServerBeforeCustomRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def request_method() -> str: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_custom_request() -> Callable[[WebDAVServerBeforeCustomRequestEventParams], None]: ...
@on_before_custom_request.setter
def on_before_custom_request(event_hook: Callable[[WebDAVServerBeforeCustomRequestEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the user code about an incoming custom request (a generic request, unknown to the server, and not covered by the other handlers). The RequestMethod parameter specifies the HTTP request method used (GET, POST, PUT, ...), and Path indicates the requested path. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_custom_request call, allowing you to respond to the request.

on_before_download_object Event

Fires when an object download request is received.

Syntax

class WebDAVServerBeforeDownloadObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_download_object() -> Callable[[WebDAVServerBeforeDownloadObjectEventParams], None]: ...
@on_before_download_object.setter
def on_before_download_object(event_hook: Callable[[WebDAVServerBeforeDownloadObjectEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about an incoming object download request. The Path parameter contains the path of the requested object. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by on_download_object, on_read_object, and on_download_object_completed calls, allowing you to supply the object data to the client.

on_before_lock_object Event

Fires when a lock request is received.

Syntax

class WebDAVServerBeforeLockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_lock_object() -> Callable[[WebDAVServerBeforeLockObjectEventParams], None]: ...
@on_before_lock_object.setter
def on_before_lock_object(event_hook: Callable[[WebDAVServerBeforeLockObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application that an object lock request was received. The Path parameter contains the path to be locked. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_lock_object call which expects you to perform the locking as required.

on_before_refresh_lock Event

Reports the receipt of lock refresh request.

Syntax

class WebDAVServerBeforeRefreshLockEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_refresh_lock() -> Callable[[WebDAVServerBeforeRefreshLockEventParams], None]: ...
@on_before_refresh_lock.setter
def on_before_refresh_lock(event_hook: Callable[[WebDAVServerBeforeRefreshLockEventParams], None]) -> None: ...

Remarks

Use this event to be notified about refresh requests for existing locks. The Path parameter contains the path on which to refresh the lock. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_refresh_lock call, allowing you to virtualize the operation.

on_before_remove_object Event

Fires when an object deletion request is received.

Syntax

class WebDAVServerBeforeRemoveObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_remove_object() -> Callable[[WebDAVServerBeforeRemoveObjectEventParams], None]: ...
@on_before_remove_object.setter
def on_before_remove_object(event_hook: Callable[[WebDAVServerBeforeRemoveObjectEventParams], None]) -> None: ...

Remarks

Use this event to track object deletion requests. The Path parameter contains the path of the object to be deleted. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_remove_object call, allowing you to virtualize the deletion operation.

on_before_rename_object Event

Reports object renaming requests.

Syntax

class WebDAVServerBeforeRenameObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_rename_object() -> Callable[[WebDAVServerBeforeRenameObjectEventParams], None]: ...
@on_before_rename_object.setter
def on_before_rename_object(event_hook: Callable[[WebDAVServerBeforeRenameObjectEventParams], None]) -> None: ...

Remarks

The server uses this event to notify the application about incoming object rename requests. OldPath and NewPath contain the existing and the new path for the object. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_rename_object call, where your code is expected to perform the renaming operation.

on_before_request Event

Fires before a DAV request is processed.

Syntax

class WebDAVServerBeforeRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def http_method() -> str: ...

  @property
  def url() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_request() -> Callable[[WebDAVServerBeforeRequestEventParams], None]: ...
@on_before_request.setter
def on_before_request(event_hook: Callable[[WebDAVServerBeforeRequestEventParams], None]) -> None: ...

Remarks

This event fires before an incoming request is processed. ConnectionID indicates the client's unique connection ID; HTTPMethod specifies the HTTP method being used to submit the request, and URL signifies the object's URL.

Use Accept parameter to accept or reject the request.

on_before_set_attributes Event

Notifies the application about attribute change request.

Syntax

class WebDAVServerBeforeSetAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_set_attributes() -> Callable[[WebDAVServerBeforeSetAttributesEventParams], None]: ...
@on_before_set_attributes.setter
def on_before_set_attributes(event_hook: Callable[[WebDAVServerBeforeSetAttributesEventParams], None]) -> None: ...

Remarks

Use this event to react to object attributes change requests. The Path parameter contains the object path. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a series of on_set_attribute and/or on_clear_attribute calls, for each attribute to be set or cleared.

on_before_unlock_object Event

Fires when an unlock request is received.

Syntax

class WebDAVServerBeforeUnlockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_unlock_object() -> Callable[[WebDAVServerBeforeUnlockObjectEventParams], None]: ...
@on_before_unlock_object.setter
def on_before_unlock_object(event_hook: Callable[[WebDAVServerBeforeUnlockObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about the received unlock request. The Path parameter contains the path to be unlocked. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by a on_unlock_object call.

on_before_upload_object Event

Fires when an object upload request is received.

Syntax

class WebDAVServerBeforeUploadObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class WebDAVServer:
@property
def on_before_upload_object() -> Callable[[WebDAVServerBeforeUploadObjectEventParams], None]: ...
@on_before_upload_object.setter
def on_before_upload_object(event_hook: Callable[[WebDAVServerBeforeUploadObjectEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about an incoming object upload request. The Path parameter contains the path of the requested object. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code.

Choose Action as one of the following values:

If fraCustom Action is chosen, this event will be followed by on_upload_object, on_write_object, and on_upload_object_completed calls, allowing your code to process/store the object data.

on_clear_attribute Event

Reports an attribute clearance request.

Syntax

class WebDAVServerClearAttributeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def ns() -> str: ...

  @property
  def name() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_clear_attribute() -> Callable[[WebDAVServerClearAttributeEventParams], None]: ...
@on_clear_attribute.setter
def on_clear_attribute(event_hook: Callable[[WebDAVServerClearAttributeEventParams], None]) -> None: ...

Remarks

This event fires to notify the application about an attribute clearance (removal) request. Use this handler to respond to this request by making the necessary changes to the locally stored resource attributes. The ConnectionID specifies the unique client ID, Path contains the resource path, and the NS:Name pair specifies the attribute to be cleared.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_connect Event

Reports an accepted connection.

Syntax

class WebDAVServerConnectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

# In class WebDAVServer:
@property
def on_connect() -> Callable[[WebDAVServerConnectEventParams], None]: ...
@on_connect.setter
def on_connect(event_hook: Callable[[WebDAVServerConnectEventParams], None]) -> None: ...

Remarks

class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as on_get_request or on_auth_attempt.

on_copy_object Event

Lets the application handle the Copy Object request.

Syntax

class WebDAVServerCopyObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def overwrite() -> bool: ...

  @property
  def depth() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_copy_object() -> Callable[[WebDAVServerCopyObjectEventParams], None]: ...
@on_copy_object.setter
def on_copy_object(event_hook: Callable[[WebDAVServerCopyObjectEventParams], None]) -> None: ...

Remarks

Use this event handler to respond to the received Copy Object request by creating a copy of OldPath resource at NewPath.

ConnectionID specifies the unique client connection identifier, Overwrite indicates whether any existing resource(s) should be overwritten, and Depth specifies the depth of the resource tree to be copied.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_create_calendar Event

Lets the application handle a calendar creation request.

Syntax

class WebDAVServerCreateCalendarEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_create_calendar() -> Callable[[WebDAVServerCreateCalendarEventParams], None]: ...
@on_create_calendar.setter
def on_create_calendar(event_hook: Callable[[WebDAVServerCreateCalendarEventParams], None]) -> None: ...

Remarks

Use this method to respond to a calendar creation request with a custom action. This event fires if fraCustom action was returned from the preceding on_before_create_calendar call.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_create_collection Event

Lets the application respond to collection creation request.

Syntax

class WebDAVServerCreateCollectionEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_create_collection() -> Callable[[WebDAVServerCreateCollectionEventParams], None]: ...
@on_create_collection.setter
def on_create_collection(event_hook: Callable[[WebDAVServerCreateCollectionEventParams], None]) -> None: ...

Remarks

The class uses this event to let the application respond to collection creation requests. This event fires if fraCustom action was returned from the preceding on_before_create_collection call. The handler of this event is expected to create a new collection at Path.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_custom_request Event

Use this event to respond to non-standard DAV requests.

Syntax

class WebDAVServerCustomRequestEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def request_method() -> str: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_custom_request() -> Callable[[WebDAVServerCustomRequestEventParams], None]: ...
@on_custom_request.setter
def on_custom_request(event_hook: Callable[[WebDAVServerCustomRequestEventParams], None]) -> None: ...

Remarks

This event allows the application to respond in a virtualized manner to non-standard DAV requests. It will fire if fraCustom action was selected in the earlier on_before_custom_request call.

The RequestMethod specifies the HTTP method used for this request (GET, PUT, POST etc.), and the Path contains the requested path.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_data Event

Supplies a data chunk received from a client.

Syntax

class WebDAVServerDataEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def buffer() -> bytes: ...

# In class WebDAVServer:
@property
def on_data() -> Callable[[WebDAVServerDataEventParams], None]: ...
@on_data.setter
def on_data(event_hook: Callable[[WebDAVServerDataEventParams], None]) -> None: ...

Remarks

This event is fired to supply another piece of data received from a client. This event may fire multiple times.

on_disconnect Event

Fires to report a disconnected client.

Syntax

class WebDAVServerDisconnectEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebDAVServer:
@property
def on_disconnect() -> Callable[[WebDAVServerDisconnectEventParams], None]: ...
@on_disconnect.setter
def on_disconnect(event_hook: Callable[[WebDAVServerDisconnectEventParams], None]) -> None: ...

Remarks

class fires this event when a connected client disconnects.

on_download_object Event

Allows the application respond to Download Object request.

Syntax

class WebDAVServerDownloadObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_download_object() -> Callable[[WebDAVServerDownloadObjectEventParams], None]: ...
@on_download_object.setter
def on_download_object(event_hook: Callable[[WebDAVServerDownloadObjectEventParams], None]) -> None: ...

Remarks

Use this event to implement custom handler of the Download operation. This event is followed by a series of on_read_object calls, which are then followed by on_download_object_completed that signifies completion of the transfer operation.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_download_object_completed Event

This event is fired when a download operation completes.

Syntax

class WebDAVServerDownloadObjectCompletedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_download_object_completed() -> Callable[[WebDAVServerDownloadObjectCompletedEventParams], None]: ...
@on_download_object_completed.setter
def on_download_object_completed(event_hook: Callable[[WebDAVServerDownloadObjectCompletedEventParams], None]) -> None: ...

Remarks

This event is fired when a download operation completes. This event is only fired for operations handled by the user code, i.e. those intercepted with on_before_download_file event, and with Action parameter set to fraCustom.

The ConnectionID parameter specifies the session to which the event belongs, and OperationStatus reports the outcome of the transfer operation.

on_error Event

Information about errors during data delivery.

Syntax

class WebDAVServerErrorEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class WebDAVServer:
@property
def on_error() -> Callable[[WebDAVServerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[WebDAVServerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

on_external_sign Event

Handles remote or external signing initiated by the server protocol.

Syntax

class WebDAVServerExternalSignEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class WebDAVServer:
@property
def on_external_sign() -> Callable[[WebDAVServerExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[WebDAVServerExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contain algorithm-dependent parameters.

The component uses base16 (hex) encoding for Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses a .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_file_error Event

Reports a file access error to the application.

Syntax

class WebDAVServerFileErrorEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def file_name() -> str: ...

  @property
  def error_code() -> int: ...

# In class WebDAVServer:
@property
def on_file_error() -> Callable[[WebDAVServerFileErrorEventParams], None]: ...
@on_file_error.setter
def on_file_error(event_hook: Callable[[WebDAVServerFileErrorEventParams], None]) -> None: ...

Remarks

class uses this event to report a file access errors. FileName and ErrorCode contain the file path and the error code respectively.

on_headers_prepared Event

Fires when the response headers have been formed and are ready to be sent to the server.

Syntax

class WebDAVServerHeadersPreparedEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebDAVServer:
@property
def on_headers_prepared() -> Callable[[WebDAVServerHeadersPreparedEventParams], None]: ...
@on_headers_prepared.setter
def on_headers_prepared(event_hook: Callable[[WebDAVServerHeadersPreparedEventParams], None]) -> None: ...

Remarks

The class fires this event when the response headers are ready to be sent to the server. ConnectionID indicates the connection that processed the request.

Use get_response_header method with an empty header name to get the whole response header.

on_list_attributes Event

Requests object attributes from the application in fraCustom handling mode.

Syntax

class WebDAVServerListAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def attributes() -> str: ...
  @attributes.setter
  def attributes(value) -> None: ...

# In class WebDAVServer:
@property
def on_list_attributes() -> Callable[[WebDAVServerListAttributesEventParams], None]: ...
@on_list_attributes.setter
def on_list_attributes(event_hook: Callable[[WebDAVServerListAttributesEventParams], None]) -> None: ...

Remarks

The class uses this event to request a set of attributes supported/kept for the object at Path. Return the list via the Attributes parameter as a string of CRLF-separated attribute names.

After firing this event, the class may request values for individual attributes via a series of on_read_attribute calls.

This event only fires if fraCustom action type was returned from the preceding on_before_browse event call.

on_list_sub_objects Event

Requests a list of sub-objects of an object. The class uses this event to request a list of sub-objects of the object residing at Path . The Recursive parameter specifies whether the sub-objects should be browsed and returned recursively. Return the requested list via the Objects parameter by separating individual entries with CRLF.

Syntax

class WebDAVServerListSubObjectsEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def recursive() -> bool: ...

  @property
  def objects() -> str: ...
  @objects.setter
  def objects(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_list_sub_objects() -> Callable[[WebDAVServerListSubObjectsEventParams], None]: ...
@on_list_sub_objects.setter
def on_list_sub_objects(event_hook: Callable[[WebDAVServerListSubObjectsEventParams], None]) -> None: ...

Remarks

Set the status of the operation through the OperationStatus parameter as required:

on_lock_object Event

Virtualizes the object locking operation.

Syntax

class WebDAVServerLockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def owner() -> str: ...

  @property
  def exclusive() -> bool: ...

  @property
  def depth() -> int: ...

  @property
  def timeout() -> int: ...

  @property
  def token() -> str: ...
  @token.setter
  def token(value) -> None: ...

# In class WebDAVServer:
@property
def on_lock_object() -> Callable[[WebDAVServerLockObjectEventParams], None]: ...
@on_lock_object.setter
def on_lock_object(event_hook: Callable[[WebDAVServerLockObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to request a lock on the object at Path from the application. This event is only fired if fraCustom action was returned from the preceding on_before_lock_object call.

The Owner, Exclusive, Depth, and Timeout parameters specify the respective parameters of the requested lock. In response to this event, generate a lock token and return it via the Token parameter.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class WebDAVServerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class WebDAVServer:
@property
def on_notification() -> Callable[[WebDAVServerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[WebDAVServerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

on_query_quota Event

Reflects a quota enquiry by a client.

Syntax

class WebDAVServerQueryQuotaEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def username() -> str: ...

  @property
  def available() -> int: ...
  @available.setter
  def available(value) -> None: ...

  @property
  def used() -> int: ...
  @used.setter
  def used(value) -> None: ...

# In class WebDAVServer:
@property
def on_query_quota() -> Callable[[WebDAVServerQueryQuotaEventParams], None]: ...
@on_query_quota.setter
def on_query_quota(event_hook: Callable[[WebDAVServerQueryQuotaEventParams], None]) -> None: ...

Remarks

This event fires in response to a client's enquire about their quota status. Subscribe to this event to react to such enquiries in a customized manner. Use Available and Used properties to report the respective amounts back to the client.

on_read_attribute Event

Requests value of an attribute from the application in fraCustom mode.

Syntax

class WebDAVServerReadAttributeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def ns() -> str: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...
  @value.setter
  def value(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_read_attribute() -> Callable[[WebDAVServerReadAttributeEventParams], None]: ...
@on_read_attribute.setter
def on_read_attribute(event_hook: Callable[[WebDAVServerReadAttributeEventParams], None]) -> None: ...

Remarks

The class fires this event to request value of the NS:Name attribute of the object residing at Path. In the event handler, pass the attribute value via the Value parameter and set OperationStatus as required.

This event only fires if fraCustom action type was returned from the preceding on_before_browse event call.

on_read_object Event

Requests a piece of object data from the application.

Syntax

class WebDAVServerReadObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def size() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_read_object() -> Callable[[WebDAVServerReadObjectEventParams], None]: ...
@on_read_object.setter
def on_read_object(event_hook: Callable[[WebDAVServerReadObjectEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly during an overridden download operation to request object data from the application.

The handler of this event should read up to Size bytes from the downloaded object, and pass them to the component with a set_client_buffer call.

Use the OperationStatus parameter to return the operation result back to the server.

Set OperationStatus to one of the following values:

on_refresh_lock Event

Notifies the application about a lock refresh request.

Syntax

class WebDAVServerRefreshLockEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def token() -> str: ...

  @property
  def timeout() -> int: ...

  @property
  def lock_found() -> bool: ...
  @lock_found.setter
  def lock_found(value) -> None: ...

# In class WebDAVServer:
@property
def on_refresh_lock() -> Callable[[WebDAVServerRefreshLockEventParams], None]: ...
@on_refresh_lock.setter
def on_refresh_lock(event_hook: Callable[[WebDAVServerRefreshLockEventParams], None]) -> None: ...

Remarks

The class uses this event to request extension of a lock on the object at Path. This event only fires if fraCustom action was returned from the preceding on_before_refresh_lock call.

In response to this event, check the validity of the provided Token for the object at Path, and extend the lock by Timeout milliseconds if the values match. Set the LockFound result as required.

on_remove_object Event

Notifies the application about object deletion requests.

Syntax

class WebDAVServerRemoveObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_remove_object() -> Callable[[WebDAVServerRemoveObjectEventParams], None]: ...
@on_remove_object.setter
def on_remove_object(event_hook: Callable[[WebDAVServerRemoveObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about an incoming deletion request for the object at Path. This event only fires if fraCustom action was returned from the preceding on_before_remove_object call.

The handler of this event should remove the object, if appropriate, and set the OperationStatus parameter to signify the actual operation result.

on_rename_object Event

Notifies the application about object name change requests.

Syntax

class WebDAVServerRenameObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def overwrite() -> bool: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_rename_object() -> Callable[[WebDAVServerRenameObjectEventParams], None]: ...
@on_rename_object.setter
def on_rename_object(event_hook: Callable[[WebDAVServerRenameObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about an incoming rename request for the object at OldPath. The Overwrite parameter advises whether any objects currently existing at NewPath should be overwritten. This event only fires if fraCustom action was returned from the preceding on_before_rename_object call.

The handler of this event should rename the object to NewPath (if appropriate) and set the OperationStatus parameter to signify the actual operation result.

on_resource_access Event

Reports an attempt to access a resource.

Syntax

class WebDAVServerResourceAccessEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def http_method() -> str: ...

  @property
  def uri() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

  @property
  def redirect_uri() -> str: ...
  @redirect_uri.setter
  def redirect_uri(value) -> None: ...

# In class WebDAVServer:
@property
def on_resource_access() -> Callable[[WebDAVServerResourceAccessEventParams], None]: ...
@on_resource_access.setter
def on_resource_access(event_hook: Callable[[WebDAVServerResourceAccessEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a request received from the client. The HTTPMethod parameter indicates the HTTP method used (GET, POST, etc.)

ConnectionID indicates the connection that sent the request and URI suggests the requested resource.

Set Allow to false to prevent the client from accessing the resource. The class will automatically send a "forbidden" status code (403).

Set a non-empty value to RedirectURI to notify the client that the resource has moved to another place. The class will automatically send a "found" status code (302). If Allow is set to false, the value of RedirectURI is ignored.

on_set_attribute Event

Lets the application customize attribute assignment requests.

Syntax

class WebDAVServerSetAttributeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def ns() -> str: ...

  @property
  def name() -> str: ...

  @property
  def value() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_set_attribute() -> Callable[[WebDAVServerSetAttributeEventParams], None]: ...
@on_set_attribute.setter
def on_set_attribute(event_hook: Callable[[WebDAVServerSetAttributeEventParams], None]) -> None: ...

Remarks

The class uses this event to pass attribute assignment requests to the application. This event may fire multiple times after a on_before_set_attributes call, one for each attribute, if fraCustom action was chosen.

In the handler of this event, assign Value to the attribute NS:Name of the object at Path. Set OperationStatus in accordance with the outcome of the operation.

on_tls_cert_validate Event

Fires when a client certificate needs to be validated.

Syntax

class WebDAVServerTLSCertValidateEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class WebDAVServer:
@property
def on_tls_cert_validate() -> Callable[[WebDAVServerTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[WebDAVServerTLSCertValidateEventParams], None]) -> None: ...

Remarks

class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

on_tls_established Event

Reports the setup of a TLS session.

Syntax

class WebDAVServerTLSEstablishedEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebDAVServer:
@property
def on_tls_established() -> Callable[[WebDAVServerTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[WebDAVServerTLSEstablishedEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

on_tls_handshake Event

Fires when a newly established client connection initiates a TLS handshake.

Syntax

class WebDAVServerTLSHandshakeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def server_name() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class WebDAVServer:
@property
def on_tls_handshake() -> Callable[[WebDAVServerTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[WebDAVServerTLSHandshakeEventParams], None]) -> None: ...

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

on_tls_psk Event

Requests a pre-shared key for TLS-PSK.

Syntax

class WebDAVServerTLSPSKEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def identity() -> str: ...

  @property
  def psk() -> str: ...
  @psk.setter
  def psk(value) -> None: ...

  @property
  def ciphersuite() -> str: ...
  @ciphersuite.setter
  def ciphersuite(value) -> None: ...

# In class WebDAVServer:
@property
def on_tls_psk() -> Callable[[WebDAVServerTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[WebDAVServerTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

on_tls_shutdown Event

Reports closure of a TLS session.

Syntax

class WebDAVServerTLSShutdownEventParams(object):
  @property
  def connection_id() -> int: ...

# In class WebDAVServer:
@property
def on_tls_shutdown() -> Callable[[WebDAVServerTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[WebDAVServerTLSShutdownEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a on_disconnect, which marks the closure of the underlying TCP session.

on_unlock_object Event

Virtualizes the object unlocking operation.

Syntax

class WebDAVServerUnlockObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def token() -> str: ...

  @property
  def lock_found() -> bool: ...
  @lock_found.setter
  def lock_found(value) -> None: ...

# In class WebDAVServer:
@property
def on_unlock_object() -> Callable[[WebDAVServerUnlockObjectEventParams], None]: ...
@on_unlock_object.setter
def on_unlock_object(event_hook: Callable[[WebDAVServerUnlockObjectEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application of the incoming unlock request. This event only fires if fraCustom action was returned from the preceding on_before_unlock_object call.

In response to this event, check the validity of the provided Token for the object at Path, and cancel the lock if the values match. Set the LockFound result as required.

on_upload_object Event

Lets the application respond to the Upload Object request.

Syntax

class WebDAVServerUploadObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def append() -> bool: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_upload_object() -> Callable[[WebDAVServerUploadObjectEventParams], None]: ...
@on_upload_object.setter
def on_upload_object(event_hook: Callable[[WebDAVServerUploadObjectEventParams], None]) -> None: ...

Remarks

Use this event handler to respond to the received Upload Object request by reserving a place for the new object at Path. This event, if OperationStatus allows, will be followed by a series of on_write_object calls, passing object data in chunks, before a on_upload_object_completed call signals completion of the upload operation.

Check the operation status, and alter it, if needed, through the OperationStatus parameter:

on_upload_object_completed Event

This event is fired when a upload operation completes.

Syntax

class WebDAVServerUploadObjectCompletedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_upload_object_completed() -> Callable[[WebDAVServerUploadObjectCompletedEventParams], None]: ...
@on_upload_object_completed.setter
def on_upload_object_completed(event_hook: Callable[[WebDAVServerUploadObjectCompletedEventParams], None]) -> None: ...

Remarks

This event is fired when a upload operation completes. This event is only fired for operations handled by the user code, i.e. those intercepted with on_before_upload_file event, and with Action parameter set to fraCustom.

The ConnectionID parameter specifies the session to which the event belongs, and OperationStatus reports the outcome of the transfer operation.

on_write_object Event

Hands a piece of object data to the application.

Syntax

class WebDAVServerWriteObjectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class WebDAVServer:
@property
def on_write_object() -> Callable[[WebDAVServerWriteObjectEventParams], None]: ...
@on_write_object.setter
def on_write_object(event_hook: Callable[[WebDAVServerWriteObjectEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly during an overridden upload operation to pass object data to the application.

The handler of this event should retrieve the pending data buffer with a get_client_buffer call, and write it to the end of the object that is being uploaded.

Use the OperationStatus parameter to return the operation result back to the server.

Set OperationStatus to one of the following values:

WebDAVServer Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

WebDAVServer Config Settings

Base Config Settings

WebDAVServer Errors

WebDAVServer Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)