OCSPManager Class

Properties Methods Events Config Settings Errors

The OCSPManager class enables the import, export, and management of OCSP responses.

Syntax

class secureblackbox.OCSPManager

Remarks

OCSP is a protocol that allows you to verify a certificate's status in real-time, without using Certificate Revocation Lists (CRL).

An OCSP response is a response of the OCSP server to the client's request. As a minimum, it indicates the processing status of the prior request.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


blocked_cert_count	The number of records in the BlockedCert arrays.
blocked_cert_bytes	Returns the raw certificate data in DER format.
blocked_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ca_cert_bytes	Returns the raw certificate data in DER format.
ca_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
cert_bytes	Returns the raw certificate data in DER format.
cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
client_cert_count	The number of records in the ClientCert arrays.
client_cert_bytes	Returns the raw certificate data in DER format.
client_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
conn_info_aead_cipher	Indicates whether the encryption algorithm used is an AEAD cipher.
conn_info_chain_validation_details	The details of a certificate chain validation outcome.
conn_info_chain_validation_result	The outcome of a certificate chain validation routine.
conn_info_ciphersuite	The cipher suite employed by this connection.
conn_info_client_authenticated	Specifies whether client authentication was performed during this connection.
conn_info_client_auth_requested	Specifies whether client authentication was requested during this connection.
conn_info_connection_established	Indicates whether the connection has been established fully.
conn_info_connection_id	The unique identifier assigned to this connection.
conn_info_digest_algorithm	The digest algorithm used in a TLS-enabled connection.
conn_info_encryption_algorithm	The symmetric encryption algorithm used in a TLS-enabled connection.
conn_info_exportable	Indicates whether a TLS connection uses a reduced-strength exportable cipher.
conn_info_key_exchange_algorithm	The key exchange algorithm used in a TLS-enabled connection.
conn_info_key_exchange_key_bits	The length of the key exchange key of a TLS-enabled connection.
conn_info_named_ec_curve	The elliptic curve used in this connection.
conn_info_pfs_cipher	Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
conn_info_pre_shared_identity_hint	A hint professed by the server to help the client select the PSK identity to use.
conn_info_public_key_bits	The length of the public key.
conn_info_resumed_session	Indicates whether a TLS-enabled connection was spawned from another TLS connection.
conn_info_secure_connection	Indicates whether TLS or SSL is enabled for this connection.
conn_info_server_authenticated	Indicates whether server authentication was performed during a TLS-enabled connection.
conn_info_signature_algorithm	The signature algorithm used in a TLS handshake.
conn_info_symmetric_block_size	The block size of the symmetric algorithm used.
conn_info_symmetric_key_bits	The key length of the symmetric algorithm used.
conn_info_total_bytes_received	The total number of bytes received over this connection.
conn_info_total_bytes_sent	The total number of bytes sent over this connection.
conn_info_validation_log	Contains the server certificate's chain validation log.
conn_info_version	Indicates the version of SSL/TLS protocol negotiated during this connection.
entry_count	The number of records in the Entry arrays.
entry_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
fips_mode	Reserved.
known_cert_count	The number of records in the KnownCert arrays.
known_cert_bytes	Returns the raw certificate data in DER format.
known_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
known_crl_count	The number of records in the KnownCRL arrays.
known_crl_bytes	Returns the raw CRL data in DER format.
known_crl_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
known_ocsp_count	The number of records in the KnownOCSP arrays.
known_ocsp_bytes	A buffer containing the raw OCSP response data.
known_ocsp_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ocsp_response_bytes	A buffer containing the raw OCSP response data.
ocsp_response_entry_count	The number of SingleResponse elements contained in this OCSP response.
ocsp_response_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
ocsp_response_issuer	Indicates the issuer of this response (a CA or its authorized representative).
ocsp_response_issuer_rdn	Indicates the RDN of the issuer of this response (a CA or its authorized representative).
ocsp_response_location	The location of the OCSP responder.
ocsp_response_produced_at	Specifies the time when the response was produced, in UTC.
proxy_address	The IP address of the proxy server.
proxy_authentication	The authentication type used by the proxy server.
proxy_password	The password to authenticate to the proxy server.
proxy_port	The port on the proxy server to connect to.
proxy_proxy_type	The type of the proxy server.
proxy_request_headers	Contains HTTP request headers for WebTunnel and HTTP proxy.
proxy_response_body	Contains the HTTP or HTTPS (WebTunnel) proxy response body.
proxy_response_headers	Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
proxy_use_ipv6	Specifies whether IPv6 should be used when connecting through the proxy.
proxy_use_proxy	Enables or disables proxy-driven connection.
proxy_username	Specifies the username credential for proxy authentication.
server_cert_count	The number of records in the ServerCert arrays.
server_cert_bytes	Returns the raw certificate data in DER format.
server_cert_ca_key_id	A unique identifier (fingerprint) of the CA certificate's private key.
server_cert_fingerprint	Contains the fingerprint (a hash imprint) of this certificate.
server_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.
server_cert_issuer	The common name of the certificate issuer (CA), typically a company name.
server_cert_issuer_rdn	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.
server_cert_key_algorithm	Specifies the public key algorithm of this certificate.
server_cert_key_bits	Returns the length of the public key.
server_cert_key_fingerprint	Returns a fingerprint of the public key contained in the certificate.
server_cert_key_usage	Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
server_cert_public_key_bytes	Contains the certificate's public key in DER format.
server_cert_self_signed	Indicates whether the certificate is self-signed (root) or signed by an external CA.
server_cert_serial_number	Returns the certificate's serial number.
server_cert_sig_algorithm	Indicates the algorithm that was used by the CA to sign this certificate.
server_cert_subject	The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
server_cert_subject_key_id	Contains a unique identifier (fingerprint) of the certificate's private key.
server_cert_subject_rdn	A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).
server_cert_valid_from	The time point at which the certificate becomes valid, in UTC.
server_cert_valid_to	The time point at which the certificate expires, in UTC.
socket_dns_mode	Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.
socket_dns_port	Specifies the port number to be used for sending queries to the DNS server.
socket_dns_query_timeout	The timeout (in milliseconds) for each DNS query.
socket_dns_servers	The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
socket_dns_total_timeout	The timeout (in milliseconds) for the whole resolution process.
socket_incoming_speed_limit	The maximum number of bytes to read from the socket, per second.
socket_local_address	The local network interface to bind the socket to.
socket_local_port	The local port number to bind the socket to.
socket_outgoing_speed_limit	The maximum number of bytes to write to the socket, per second.
socket_timeout	The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
socket_use_ipv6	Enables or disables IP protocol version 6.
tls_auto_validate_certificates	Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
tls_base_configuration	Selects the base configuration for the TLS settings.
tls_ciphersuites	A list of ciphersuites separated with commas or semicolons.
tls_ec_curves	Defines the elliptic curves to enable.
tls_extensions	Provides access to TLS extensions.
tls_force_resume_if_destination_changes	Whether to force TLS session resumption when the destination address changes.
tls_pre_shared_identity	Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
tls_pre_shared_key	Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
tls_pre_shared_key_ciphersuite	Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
tls_renegotiation_attack_prevention_mode	Selects the renegotiation attack prevention mechanism.
tls_revocation_check	Specifies the kind(s) of revocation check to perform.
tls_ssl_options	Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
tls_tls_mode	Specifies the TLS mode to use.
tls_use_extended_master_secret	Enables the Extended Master Secret Extension, as defined in RFC 7627.
tls_use_session_resumption	Enables or disables the TLS session resumption capability.
tls_versions	The SSL/TLS versions to enable by default.
trusted_cert_count	The number of records in the TrustedCert arrays.
trusted_cert_bytes	Returns the raw certificate data in DER format.
trusted_cert_handle	Allows to get or set a 'handle', a unique identifier of the underlying property object.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


config	Sets or retrieves a configuration setting.
do_action	Performs an additional action.
get_cert_entry_index	Returns the index of the list item for the given certificate.
load_from_bytes	Loads an OCSP response from a byte array.
request	Requests an OCSP response.
save_to_bytes	Saves a copy of the OCSP response to a byte array.
save_to_file	Saves a copy of the OCSP response to a file.
validate	Validates the responder's signature over the OCSP response.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


on_error	Information about errors during OCSP (Online Certificate Status Protocol) response management.
on_notification	This event notifies the application about an underlying control flow event.
on_tls_cert_needed	Fires when a remote TLS party requests a client certificate.
on_tls_cert_validate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
on_tls_established	Fires when a TLS handshake with Host successfully completes.
on_tls_handshake	Fires when a new TLS handshake is initiated, before the handshake commences.
on_tls_psk	Notifies the application about the PSK key exchange.
on_tls_shutdown	Reports the graceful closure of a TLS connection.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
UseMicrosoftCTL	Enables or disables the automatic use of the Microsoft online certificate trust list.
UseSystemCertificates	Enables or disables the use of the system certificates.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the class.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolver	Specifies whether the client classes should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

blocked_cert_count Property

The number of records in the BlockedCert arrays.

Syntax

def get_blocked_cert_count() -> int: ...
def set_blocked_cert_count(value: int) -> None: ...

blocked_cert_count = property(get_blocked_cert_count, set_blocked_cert_count)

Default Value

Remarks

This property controls the size of the following arrays:

blocked_cert_bytes
blocked_cert_handle

The array indices start at 0 and end at blocked_cert_count - 1.

blocked_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_blocked_cert_bytes(blocked_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The blocked_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the blocked_cert_count property.

This property is read-only.

blocked_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_blocked_cert_handle(blocked_cert_index: int) -> int: ...
def set_blocked_cert_handle(blocked_cert_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The blocked_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the blocked_cert_count property.

ca_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_ca_cert_bytes() -> bytes: ...

ca_cert_bytes = property(get_ca_cert_bytes, None)

Remarks

Returns the raw certificate data in DER format.

This property is read-only.

ca_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_ca_cert_handle() -> int: ...
def set_ca_cert_handle(value: int) -> None: ...

ca_cert_handle = property(get_ca_cert_handle, set_ca_cert_handle)

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_cert_bytes() -> bytes: ...

cert_bytes = property(get_cert_bytes, None)

Remarks

Returns the raw certificate data in DER format.

This property is read-only.

cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_cert_handle() -> int: ...
def set_cert_handle(value: int) -> None: ...

cert_handle = property(get_cert_handle, set_cert_handle)

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

client_cert_count Property

The number of records in the ClientCert arrays.

Syntax

def get_client_cert_count() -> int: ...
def set_client_cert_count(value: int) -> None: ...

client_cert_count = property(get_client_cert_count, set_client_cert_count)

Default Value

Remarks

This property controls the size of the following arrays:

client_cert_bytes
client_cert_handle

The array indices start at 0 and end at client_cert_count - 1.

client_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_client_cert_bytes(client_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the client_cert_count property.

This property is read-only.

client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_client_cert_handle(client_cert_index: int) -> int: ...
def set_client_cert_handle(client_cert_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the client_cert_count property.

conn_info_aead_cipher Property

Indicates whether the encryption algorithm used is an AEAD cipher.

Syntax

def get_conn_info_aead_cipher() -> bool: ...

conn_info_aead_cipher = property(get_conn_info_aead_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the encryption algorithm used is an AEAD cipher.

This property is read-only.

conn_info_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_conn_info_chain_validation_details() -> int: ...

conn_info_chain_validation_details = property(get_conn_info_chain_validation_details, None)

Default Value

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

This property is read-only.

conn_info_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_conn_info_chain_validation_result() -> int: ...

conn_info_chain_validation_result = property(get_conn_info_chain_validation_result, None)

Default Value

Remarks

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

conn_info_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_conn_info_ciphersuite() -> str: ...

conn_info_ciphersuite = property(get_conn_info_ciphersuite, None)

Default Value

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

conn_info_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_conn_info_client_authenticated() -> bool: ...

conn_info_client_authenticated = property(get_conn_info_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

conn_info_client_auth_requested Property

Specifies whether client authentication was requested during this connection.

Syntax

def get_conn_info_client_auth_requested() -> bool: ...

conn_info_client_auth_requested = property(get_conn_info_client_auth_requested, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was requested during this connection.

This property is read-only.

conn_info_connection_established Property

Indicates whether the connection has been established fully.

Syntax

def get_conn_info_connection_established() -> bool: ...

conn_info_connection_established = property(get_conn_info_connection_established, None)

Default Value

FALSE

Remarks

Indicates whether the connection has been established fully.

This property is read-only.

conn_info_connection_id Property

The unique identifier assigned to this connection.

Syntax

def get_conn_info_connection_id() -> bytes: ...

conn_info_connection_id = property(get_conn_info_connection_id, None)

Remarks

The unique identifier assigned to this connection.

This property is read-only.

conn_info_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_digest_algorithm() -> str: ...

conn_info_digest_algorithm = property(get_conn_info_digest_algorithm, None)

Default Value

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_encryption_algorithm() -> str: ...

conn_info_encryption_algorithm = property(get_conn_info_encryption_algorithm, None)

Default Value

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_exportable Property

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

Syntax

def get_conn_info_exportable() -> bool: ...

conn_info_exportable = property(get_conn_info_exportable, None)

Default Value

FALSE

Remarks

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

This property is read-only.

conn_info_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_key_exchange_algorithm() -> str: ...

conn_info_key_exchange_algorithm = property(get_conn_info_key_exchange_algorithm, None)

Default Value

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_conn_info_key_exchange_key_bits() -> int: ...

conn_info_key_exchange_key_bits = property(get_conn_info_key_exchange_key_bits, None)

Default Value

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

conn_info_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_conn_info_named_ec_curve() -> str: ...

conn_info_named_ec_curve = property(get_conn_info_named_ec_curve, None)

Default Value

Remarks

The elliptic curve used in this connection.

This property is read-only.

conn_info_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_conn_info_pfs_cipher() -> bool: ...

conn_info_pfs_cipher = property(get_conn_info_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

conn_info_pre_shared_identity_hint Property

A hint professed by the server to help the client select the PSK identity to use.

Syntax

def get_conn_info_pre_shared_identity_hint() -> str: ...

conn_info_pre_shared_identity_hint = property(get_conn_info_pre_shared_identity_hint, None)

Default Value

Remarks

A hint professed by the server to help the client select the PSK identity to use.

This property is read-only.

conn_info_public_key_bits Property

The length of the public key.

Syntax

def get_conn_info_public_key_bits() -> int: ...

conn_info_public_key_bits = property(get_conn_info_public_key_bits, None)

Default Value

Remarks

The length of the public key.

This property is read-only.

conn_info_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_conn_info_resumed_session() -> bool: ...

conn_info_resumed_session = property(get_conn_info_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

conn_info_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_conn_info_secure_connection() -> bool: ...

conn_info_secure_connection = property(get_conn_info_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

conn_info_server_authenticated Property

Indicates whether server authentication was performed during a TLS-enabled connection.

Syntax

def get_conn_info_server_authenticated() -> bool: ...

conn_info_server_authenticated = property(get_conn_info_server_authenticated, None)

Default Value

FALSE

Remarks

Indicates whether server authentication was performed during a TLS-enabled connection.

This property is read-only.

conn_info_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_conn_info_signature_algorithm() -> str: ...

conn_info_signature_algorithm = property(get_conn_info_signature_algorithm, None)

Default Value

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

conn_info_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_conn_info_symmetric_block_size() -> int: ...

conn_info_symmetric_block_size = property(get_conn_info_symmetric_block_size, None)

Default Value

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

conn_info_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_conn_info_symmetric_key_bits() -> int: ...

conn_info_symmetric_key_bits = property(get_conn_info_symmetric_key_bits, None)

Default Value

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

conn_info_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_conn_info_total_bytes_received() -> int: ...

conn_info_total_bytes_received = property(get_conn_info_total_bytes_received, None)

Default Value

Remarks

The total number of bytes received over this connection.

This property is read-only.

conn_info_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_conn_info_total_bytes_sent() -> int: ...

conn_info_total_bytes_sent = property(get_conn_info_total_bytes_sent, None)

Default Value

Remarks

The total number of bytes sent over this connection.

This property is read-only.

conn_info_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_conn_info_validation_log() -> str: ...

conn_info_validation_log = property(get_conn_info_validation_log, None)

Default Value

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

conn_info_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_conn_info_version() -> str: ...

conn_info_version = property(get_conn_info_version, None)

Default Value

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

entry_count Property

The number of records in the Entry arrays.

Syntax

def get_entry_count() -> int: ...
def set_entry_count(value: int) -> None: ...

entry_count = property(get_entry_count, set_entry_count)

Default Value

Remarks

This property controls the size of the following arrays:

entry_handle

The array indices start at 0 and end at entry_count - 1.

entry_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_entry_handle(entry_index: int) -> int: ...
def set_entry_handle(entry_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The entry_index parameter specifies the index of the item in the array. The size of the array is controlled by the entry_count property.

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

known_cert_count Property

The number of records in the KnownCert arrays.

Syntax

def get_known_cert_count() -> int: ...
def set_known_cert_count(value: int) -> None: ...

known_cert_count = property(get_known_cert_count, set_known_cert_count)

Default Value

Remarks

This property controls the size of the following arrays:

known_cert_bytes
known_cert_handle

The array indices start at 0 and end at known_cert_count - 1.

known_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_known_cert_bytes(known_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The known_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_cert_count property.

This property is read-only.

known_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_cert_handle(known_cert_index: int) -> int: ...
def set_known_cert_handle(known_cert_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The known_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_cert_count property.

known_crl_count Property

The number of records in the KnownCRL arrays.

Syntax

def get_known_crl_count() -> int: ...
def set_known_crl_count(value: int) -> None: ...

known_crl_count = property(get_known_crl_count, set_known_crl_count)

Default Value

Remarks

This property controls the size of the following arrays:

known_crl_bytes
known_crl_handle

The array indices start at 0 and end at known_crl_count - 1.

known_crl_bytes Property

Returns the raw CRL data in DER format.

Syntax

def get_known_crl_bytes(known_crl_index: int) -> bytes: ...

Remarks

Returns the raw CRL data in DER format.

The known_crl_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_crl_count property.

This property is read-only.

known_crl_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_crl_handle(known_crl_index: int) -> int: ...
def set_known_crl_handle(known_crl_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The known_crl_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_crl_count property.

known_ocsp_count Property

The number of records in the KnownOCSP arrays.

Syntax

def get_known_ocsp_count() -> int: ...
def set_known_ocsp_count(value: int) -> None: ...

known_ocsp_count = property(get_known_ocsp_count, set_known_ocsp_count)

Default Value

Remarks

This property controls the size of the following arrays:

known_ocsp_bytes
known_ocsp_handle

The array indices start at 0 and end at known_ocsp_count - 1.

known_ocsp_bytes Property

A buffer containing the raw OCSP response data.

Syntax

def get_known_ocsp_bytes(known_ocsp_index: int) -> bytes: ...

Remarks

A buffer containing the raw OCSP response data.

The known_ocsp_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_ocsp_count property.

This property is read-only.

known_ocsp_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_ocsp_handle(known_ocsp_index: int) -> int: ...
def set_known_ocsp_handle(known_ocsp_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The known_ocsp_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_ocsp_count property.

ocsp_response_bytes Property

A buffer containing the raw OCSP response data.

Syntax

def get_ocsp_response_bytes() -> bytes: ...

ocsp_response_bytes = property(get_ocsp_response_bytes, None)

Remarks

A buffer containing the raw OCSP response data.

This property is read-only.

ocsp_response_entry_count Property

The number of SingleResponse elements contained in this OCSP response.

Syntax

def get_ocsp_response_entry_count() -> int: ...

ocsp_response_entry_count = property(get_ocsp_response_entry_count, None)

Default Value

Remarks

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

This property is read-only.

ocsp_response_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_ocsp_response_handle() -> int: ...
def set_ocsp_response_handle(value: int) -> None: ...

ocsp_response_handle = property(get_ocsp_response_handle, set_ocsp_response_handle)

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

ocsp_response_issuer Property

Indicates the issuer of this response (a CA or its authorized representative).

Syntax

def get_ocsp_response_issuer() -> str: ...

ocsp_response_issuer = property(get_ocsp_response_issuer, None)

Default Value

Remarks

Indicates the issuer of this response (a CA or its authorized representative).

This property is read-only.

ocsp_response_issuer_rdn Property

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Syntax

def get_ocsp_response_issuer_rdn() -> str: ...

ocsp_response_issuer_rdn = property(get_ocsp_response_issuer_rdn, None)

Default Value

Remarks

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

This property is read-only.

ocsp_response_location Property

The location of the OCSP responder.

Syntax

def get_ocsp_response_location() -> str: ...

ocsp_response_location = property(get_ocsp_response_location, None)

Default Value

Remarks

The location of the OCSP responder.

This property is read-only.

ocsp_response_produced_at Property

Specifies the time when the response was produced, in UTC.

Syntax

def get_ocsp_response_produced_at() -> str: ...

ocsp_response_produced_at = property(get_ocsp_response_produced_at, None)

Default Value

Remarks

Specifies the time when the response was produced, in UTC.

This property is read-only.

proxy_address Property

The IP address of the proxy server.

Syntax

def get_proxy_address() -> str: ...
def set_proxy_address(value: str) -> None: ...

proxy_address = property(get_proxy_address, set_proxy_address)

Default Value

Remarks

The IP address of the proxy server.

proxy_authentication Property

The authentication type used by the proxy server.

Syntax

def get_proxy_authentication() -> int: ...
def set_proxy_authentication(value: int) -> None: ...

proxy_authentication = property(get_proxy_authentication, set_proxy_authentication)

Default Value

Remarks

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

proxy_password Property

The password to authenticate to the proxy server.

Syntax

def get_proxy_password() -> str: ...
def set_proxy_password(value: str) -> None: ...

proxy_password = property(get_proxy_password, set_proxy_password)

Default Value

Remarks

The password to authenticate to the proxy server.

proxy_port Property

The port on the proxy server to connect to.

Syntax

def get_proxy_port() -> int: ...
def set_proxy_port(value: int) -> None: ...

proxy_port = property(get_proxy_port, set_proxy_port)

Default Value

Remarks

The port on the proxy server to connect to.

proxy_proxy_type Property

The type of the proxy server.

Syntax

def get_proxy_proxy_type() -> int: ...
def set_proxy_proxy_type(value: int) -> None: ...

proxy_proxy_type = property(get_proxy_proxy_type, set_proxy_proxy_type)

Default Value

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

proxy_request_headers Property

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

def get_proxy_request_headers() -> str: ...
def set_proxy_request_headers(value: str) -> None: ...

proxy_request_headers = property(get_proxy_request_headers, set_proxy_request_headers)

Default Value

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

proxy_response_body Property

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

def get_proxy_response_body() -> str: ...
def set_proxy_response_body(value: str) -> None: ...

proxy_response_body = property(get_proxy_response_body, set_proxy_response_body)

Default Value

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

proxy_response_headers Property

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

def get_proxy_response_headers() -> str: ...
def set_proxy_response_headers(value: str) -> None: ...

proxy_response_headers = property(get_proxy_response_headers, set_proxy_response_headers)

Default Value

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

proxy_use_ipv6 Property

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

def get_proxy_use_ipv6() -> bool: ...
def set_proxy_use_ipv6(value: bool) -> None: ...

proxy_use_ipv6 = property(get_proxy_use_ipv6, set_proxy_use_ipv6)

Default Value

FALSE

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

proxy_use_proxy Property

Enables or disables proxy-driven connection.

Syntax

def get_proxy_use_proxy() -> bool: ...
def set_proxy_use_proxy(value: bool) -> None: ...

proxy_use_proxy = property(get_proxy_use_proxy, set_proxy_use_proxy)

Default Value

FALSE

Remarks

Enables or disables proxy-driven connection.

proxy_username Property

Specifies the username credential for proxy authentication.

Syntax

def get_proxy_username() -> str: ...
def set_proxy_username(value: str) -> None: ...

proxy_username = property(get_proxy_username, set_proxy_username)

Default Value

Remarks

Specifies the username credential for proxy authentication.

server_cert_count Property

The number of records in the ServerCert arrays.

Syntax

def get_server_cert_count() -> int: ...

server_cert_count = property(get_server_cert_count, None)

Default Value

Remarks

This property controls the size of the following arrays:

server_cert_bytes
server_cert_ca_key_id
server_cert_fingerprint
server_cert_handle
server_cert_issuer
server_cert_issuer_rdn
server_cert_key_algorithm
server_cert_key_bits
server_cert_key_fingerprint
server_cert_key_usage
server_cert_public_key_bytes
server_cert_self_signed
server_cert_serial_number
server_cert_sig_algorithm
server_cert_subject
server_cert_subject_key_id
server_cert_subject_rdn
server_cert_valid_from
server_cert_valid_to

The array indices start at 0 and end at server_cert_count - 1.

This property is read-only.

server_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_server_cert_bytes(server_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

def get_server_cert_ca_key_id(server_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_server_cert_fingerprint(server_cert_index: int) -> bytes: ...

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_server_cert_handle(server_cert_index: int) -> int: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_server_cert_issuer(server_cert_index: int) -> str: ...

Default Value

Remarks

The common name of the certificate issuer (CA), typically a company name.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_issuer_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

def get_server_cert_issuer_rdn(server_cert_index: int) -> str: ...

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_server_cert_key_algorithm(server_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_bits Property

Returns the length of the public key.

Syntax

def get_server_cert_key_bits(server_cert_index: int) -> int: ...

Default Value

Remarks

Returns the length of the public key.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_fingerprint Property

Returns a fingerprint of the public key contained in the certificate.

Syntax

def get_server_cert_key_fingerprint(server_cert_index: int) -> bytes: ...

Remarks

Returns a fingerprint of the public key contained in the certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_server_cert_key_usage(server_cert_index: int) -> int: ...

Default Value

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_server_cert_public_key_bytes(server_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_server_cert_self_signed(server_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_server_cert_serial_number(server_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_server_cert_sig_algorithm(server_cert_index: int) -> str: ...

Default Value

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_server_cert_subject(server_cert_index: int) -> str: ...

Default Value

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject_key_id Property

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

def get_server_cert_subject_key_id(server_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

def get_server_cert_subject_rdn(server_cert_index: int) -> str: ...

Default Value

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_server_cert_valid_from(server_cert_index: int) -> str: ...

Default Value

Remarks

The time point at which the certificate becomes valid, in UTC.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_server_cert_valid_to(server_cert_index: int) -> str: ...

Default Value

Remarks

The time point at which the certificate expires, in UTC.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

socket_dns_mode Property

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Syntax

def get_socket_dns_mode() -> int: ...
def set_socket_dns_mode(value: int) -> None: ...

socket_dns_mode = property(get_socket_dns_mode, set_socket_dns_mode)

Default Value

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

socket_dns_port Property

Specifies the port number to be used for sending queries to the DNS server.

Syntax

def get_socket_dns_port() -> int: ...
def set_socket_dns_port(value: int) -> None: ...

socket_dns_port = property(get_socket_dns_port, set_socket_dns_port)

Default Value

Remarks

Specifies the port number to be used for sending queries to the DNS server.

socket_dns_query_timeout Property

The timeout (in milliseconds) for each DNS query.

Syntax

def get_socket_dns_query_timeout() -> int: ...
def set_socket_dns_query_timeout(value: int) -> None: ...

socket_dns_query_timeout = property(get_socket_dns_query_timeout, set_socket_dns_query_timeout)

Default Value

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

socket_dns_servers Property

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

def get_socket_dns_servers() -> str: ...
def set_socket_dns_servers(value: str) -> None: ...

socket_dns_servers = property(get_socket_dns_servers, set_socket_dns_servers)

Default Value

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

socket_dns_total_timeout Property

The timeout (in milliseconds) for the whole resolution process.

Syntax

def get_socket_dns_total_timeout() -> int: ...
def set_socket_dns_total_timeout(value: int) -> None: ...

socket_dns_total_timeout = property(get_socket_dns_total_timeout, set_socket_dns_total_timeout)

Default Value

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by tls_base_configuration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects the renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

Remarks

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

Remarks

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

tls_use_extended_master_secret Property

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables the TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables the TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

Remarks

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

trusted_cert_count Property

The number of records in the TrustedCert arrays.

Syntax

def get_trusted_cert_count() -> int: ...
def set_trusted_cert_count(value: int) -> None: ...

trusted_cert_count = property(get_trusted_cert_count, set_trusted_cert_count)

Default Value

Remarks

This property controls the size of the following arrays:

trusted_cert_bytes
trusted_cert_handle

The array indices start at 0 and end at trusted_cert_count - 1.

trusted_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_trusted_cert_bytes(trusted_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The trusted_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the trusted_cert_count property.

This property is read-only.

trusted_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_trusted_cert_handle(trusted_cert_index: int) -> int: ...
def set_trusted_cert_handle(trusted_cert_index: int, value: int) -> None: ...

Default Value

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

The trusted_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the trusted_cert_count property.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

get_cert_entry_index Method

Returns the index of the list item for the given certificate.

Syntax

def get_cert_entry_index(serial_number: bytes) -> int: ...

Remarks

Use this method to get the entry index given certificate's SerialNumber.

load_from_bytes Method

Loads an OCSP response from a byte array.

Syntax

def load_from_bytes(resp_bytes: bytes) -> None: ...

Remarks

Use this method to load an OCSP response from a byte array

request Method

Requests an OCSP response.

Syntax

def request() -> bool: ...

Remarks

Use this method to request an OCSP response for a certificate. Assign the certificate to certificate, and its CA certificate (required) to ca_certificate property.

The method returns true if the CA provides OCSP service for this certificate, and false otherwise. If OCSP service is provided, and the request succeeds, the downloaded OCSP response will be available in ocsp_response. If OCSP service is provided, but the request fails (e.g. due to a network issue), an exception will be thrown.

save_to_bytes Method

Saves a copy of the OCSP response to a byte array.

Syntax

def save_to_bytes() -> bytes: ...

Remarks

Use this method to save a copy of the attached OCSP response to a byte array.

save_to_file Method

Saves a copy of the OCSP response to a file.

Syntax

def save_to_file(filename: str) -> None: ...

Remarks

Use this method to save a copy of the attached OCSP response to a file.

validate Method

Validates the responder's signature over the OCSP response.

Syntax

def validate() -> int: ...

Remarks

Call this method to validate the OCSP responder's signature over the attached OCSP response.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure

on_error Event

Information about errors during OCSP (Online Certificate Status Protocol) response management.

Syntax

class OCSPManagerErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class OCSPManager:
@property
def on_error() -> Callable[[OCSPManagerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[OCSPManagerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during OCSP processing.

ErrorCode contains the error code and Description contains a textual description of the error. For the list of error codes please refer to OCSP.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class OCSPManagerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class OCSPManager:
@property
def on_notification() -> Callable[[OCSPManagerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[OCSPManagerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

on_tls_cert_needed Event

Fires when a remote TLS party requests a client certificate.

Syntax

class OCSPManagerTLSCertNeededEventParams(object):
  @property
  def host() -> str: ...

  @property
  def ca_names() -> str: ...

# In class OCSPManager:
@property
def on_tls_cert_needed() -> Callable[[OCSPManagerTLSCertNeededEventParams], None]: ...
@on_tls_cert_needed.setter
def on_tls_cert_needed(event_hook: Callable[[OCSPManagerTLSCertNeededEventParams], None]) -> None: ...

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the tls_client_chain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the on_tls_handshake event for the given host and, if the certificate was accepted, succeeded by the on_tls_established event.

on_tls_cert_validate Event

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

class OCSPManagerTLSCertValidateEventParams(object):
  @property
  def server_host() -> str: ...

  @property
  def server_ip() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class OCSPManager:
@property
def on_tls_cert_validate() -> Callable[[OCSPManagerTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[OCSPManagerTLSCertValidateEventParams], None]) -> None: ...

Remarks

This event is fired during a TLS handshake. Use the tls_server_chain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

on_tls_established Event

Fires when a TLS handshake with Host successfully completes.

Syntax

class OCSPManagerTLSEstablishedEventParams(object):
  @property
  def host() -> str: ...

  @property
  def version() -> str: ...

  @property
  def ciphersuite() -> str: ...

  @property
  def connection_id() -> bytes: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class OCSPManager:
@property
def on_tls_established() -> Callable[[OCSPManagerTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[OCSPManagerTLSEstablishedEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

on_tls_handshake Event

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

class OCSPManagerTLSHandshakeEventParams(object):
  @property
  def host() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class OCSPManager:
@property
def on_tls_handshake() -> Callable[[OCSPManagerTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[OCSPManagerTLSHandshakeEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the on_tls_established event. If the server chooses to request a client certificate, the on_tls_cert_needed event will also be fired.

on_tls_psk Event

Notifies the application about the PSK key exchange.

Syntax

class OCSPManagerTLSPSKEventParams(object):
  @property
  def host() -> str: ...

  @property
  def hint() -> str: ...

# In class OCSPManager:
@property
def on_tls_psk() -> Callable[[OCSPManagerTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[OCSPManagerTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about the beginning of TLS-PSK key exchange with Host. The Hint parameter may be used by the server to identify the key or service to use. Use the PreSharedKey field of tls_settings to provide the pre-shared key to the component.

on_tls_shutdown Event

Reports the graceful closure of a TLS connection.

Syntax

class OCSPManagerTLSShutdownEventParams(object):
  @property
  def host() -> str: ...

# In class OCSPManager:
@property
def on_tls_shutdown() -> Callable[[OCSPManagerTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[OCSPManagerTLSShutdownEventParams], None]) -> None: ...

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

OCSPManager Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

OCSPManager Config Settings

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the trusted_certificates property) are considered trusted.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

CA, revocation source, TLS key usage requirements are not mandated
Violation of OCSP issuer requirements are ignored
The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
Basic constraints and name constraints of CA certificates are ignored
Some weaker algorithms are tolerated

UseMicrosoftCTL: Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Config Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

OCSPManager Errors


	1048577 Invalid parameter value (`SB_ERROR_INVALID_PARAMETER`)
	1048578 Class is configured incorrectly (`SB_ERROR_INVALID_SETUP`)
	1048579 Operation cannot be executed in the current state (`SB_ERROR_INVALID_STATE`)
	1048580 Attempt to set an invalid value to a property (`SB_ERROR_INVALID_VALUE`)
	1048581 Certificate does not have its private key loaded (`SB_ERROR_NO_PRIVATE_KEY`)
	1048581 Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)