SOAPClient Class

Properties   Methods   Events   Config Settings   Errors  

The SOAPClient class sends SOAP messages.

Syntax

class secureblackbox.SOAPClient

Remarks

The SOAPClient class implements client-side functionality of the SOAP version 1.1 and 1.2 protocols over HTTP/HTTPS.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

attachment_bytes Property

Use this property to pass an attachment to class in the byte array form.

Syntax

def get_attachment_bytes() -> bytes: ...
def set_attachment_bytes(value: bytes) -> None: ...

attachment_bytes = property(get_attachment_bytes, set_attachment_bytes)

Remarks

Assign a byte array containing the data to be processed to this property.

attachment_file Property

Specifies the attachment file to be sent with the request.

Syntax

def get_attachment_file() -> str: ...
def set_attachment_file(value: str) -> None: ...

attachment_file = property(get_attachment_file, set_attachment_file)

Default Value

""

Remarks

Provide a full path to the attachment file to be sent with the SOAP request. Use send_message_with_attachments method to send the request.

Subscribe to on_before_send_attachment to pass more than one attachment.

blocked_cert_count Property

The number of records in the BlockedCert arrays.

Syntax

def get_blocked_cert_count() -> int: ...
def set_blocked_cert_count(value: int) -> None: ...

blocked_cert_count = property(get_blocked_cert_count, set_blocked_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• blocked_cert_bytes
• blocked_cert_handle

The array indices start at 0 and end at blocked_cert_count - 1.

blocked_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_blocked_cert_bytes(blocked_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The blocked_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the blocked_cert_count property.

This property is read-only.

blocked_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_blocked_cert_handle(blocked_cert_index: int) -> int: ...
def set_blocked_cert_handle(blocked_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The blocked_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the blocked_cert_count property.

client_cert_count Property

The number of records in the ClientCert arrays.

Syntax

def get_client_cert_count() -> int: ...
def set_client_cert_count(value: int) -> None: ...

client_cert_count = property(get_client_cert_count, set_client_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• client_cert_bytes
• client_cert_handle

The array indices start at 0 and end at client_cert_count - 1.

client_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_client_cert_bytes(client_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the client_cert_count property.

This property is read-only.

client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_client_cert_handle(client_cert_index: int) -> int: ...
def set_client_cert_handle(client_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the client_cert_count property.

conn_info_aead_cipher Property

Indicates whether the encryption algorithm used is an AEAD cipher.

Syntax

def get_conn_info_aead_cipher() -> bool: ...

conn_info_aead_cipher = property(get_conn_info_aead_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the encryption algorithm used is an AEAD cipher.

This property is read-only.

conn_info_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_conn_info_chain_validation_details() -> int: ...

conn_info_chain_validation_details = property(get_conn_info_chain_validation_details, None)

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

This property is read-only.

conn_info_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_conn_info_chain_validation_result() -> int: ...

conn_info_chain_validation_result = property(get_conn_info_chain_validation_result, None)

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

conn_info_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_conn_info_ciphersuite() -> str: ...

conn_info_ciphersuite = property(get_conn_info_ciphersuite, None)

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

conn_info_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_conn_info_client_authenticated() -> bool: ...

conn_info_client_authenticated = property(get_conn_info_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

conn_info_client_auth_requested Property

Specifies whether client authentication was requested during this connection.

Syntax

def get_conn_info_client_auth_requested() -> bool: ...

conn_info_client_auth_requested = property(get_conn_info_client_auth_requested, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was requested during this connection.

This property is read-only.

conn_info_connection_established Property

Indicates whether the connection has been established fully.

Syntax

def get_conn_info_connection_established() -> bool: ...

conn_info_connection_established = property(get_conn_info_connection_established, None)

Default Value

FALSE

Remarks

Indicates whether the connection has been established fully.

This property is read-only.

conn_info_connection_id Property

The unique identifier assigned to this connection.

Syntax

def get_conn_info_connection_id() -> bytes: ...

conn_info_connection_id = property(get_conn_info_connection_id, None)

Remarks

The unique identifier assigned to this connection.

This property is read-only.

conn_info_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_digest_algorithm() -> str: ...

conn_info_digest_algorithm = property(get_conn_info_digest_algorithm, None)

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_encryption_algorithm() -> str: ...

conn_info_encryption_algorithm = property(get_conn_info_encryption_algorithm, None)

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_exportable Property

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

Syntax

def get_conn_info_exportable() -> bool: ...

conn_info_exportable = property(get_conn_info_exportable, None)

Default Value

FALSE

Remarks

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

This property is read-only.

conn_info_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_conn_info_key_exchange_algorithm() -> str: ...

conn_info_key_exchange_algorithm = property(get_conn_info_key_exchange_algorithm, None)

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

conn_info_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_conn_info_key_exchange_key_bits() -> int: ...

conn_info_key_exchange_key_bits = property(get_conn_info_key_exchange_key_bits, None)

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

conn_info_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_conn_info_named_ec_curve() -> str: ...

conn_info_named_ec_curve = property(get_conn_info_named_ec_curve, None)

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only.

conn_info_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_conn_info_pfs_cipher() -> bool: ...

conn_info_pfs_cipher = property(get_conn_info_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

conn_info_pre_shared_identity_hint Property

A hint professed by the server to help the client select the PSK identity to use.

Syntax

def get_conn_info_pre_shared_identity_hint() -> str: ...

conn_info_pre_shared_identity_hint = property(get_conn_info_pre_shared_identity_hint, None)

Default Value

""

Remarks

A hint professed by the server to help the client select the PSK identity to use.

This property is read-only.

conn_info_public_key_bits Property

The length of the public key.

Syntax

def get_conn_info_public_key_bits() -> int: ...

conn_info_public_key_bits = property(get_conn_info_public_key_bits, None)

Default Value

0

Remarks

The length of the public key.

This property is read-only.

conn_info_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_conn_info_resumed_session() -> bool: ...

conn_info_resumed_session = property(get_conn_info_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

conn_info_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_conn_info_secure_connection() -> bool: ...

conn_info_secure_connection = property(get_conn_info_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

conn_info_server_authenticated Property

Indicates whether server authentication was performed during a TLS-enabled connection.

Syntax

def get_conn_info_server_authenticated() -> bool: ...

conn_info_server_authenticated = property(get_conn_info_server_authenticated, None)

Default Value

FALSE

Remarks

Indicates whether server authentication was performed during a TLS-enabled connection.

This property is read-only.

conn_info_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_conn_info_signature_algorithm() -> str: ...

conn_info_signature_algorithm = property(get_conn_info_signature_algorithm, None)

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

conn_info_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_conn_info_symmetric_block_size() -> int: ...

conn_info_symmetric_block_size = property(get_conn_info_symmetric_block_size, None)

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

conn_info_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_conn_info_symmetric_key_bits() -> int: ...

conn_info_symmetric_key_bits = property(get_conn_info_symmetric_key_bits, None)

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

conn_info_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_conn_info_total_bytes_received() -> int: ...

conn_info_total_bytes_received = property(get_conn_info_total_bytes_received, None)

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only.

conn_info_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_conn_info_total_bytes_sent() -> int: ...

conn_info_total_bytes_sent = property(get_conn_info_total_bytes_sent, None)

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only.

conn_info_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_conn_info_validation_log() -> str: ...

conn_info_validation_log = property(get_conn_info_validation_log, None)

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

conn_info_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_conn_info_version() -> str: ...

conn_info_version = property(get_conn_info_version, None)

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

encoding Property

Specifies SOAP message encoding.

Syntax

def get_encoding() -> str: ...
def set_encoding(value: str) -> None: ...

encoding = property(get_encoding, set_encoding)

Default Value

""

Remarks

Use this property to specify the encoding to apply to the SOAP message.

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

external_crypto_public_key_algorithm Property

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

""

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

fault_actor Property

Specifies the entity that caused the fault.

Syntax

def get_fault_actor() -> str: ...

fault_actor = property(get_fault_actor, None)

Default Value

""

Remarks

Use this property to get the URI associated with the actor (SOAP node) that caused the fault. In RPC-style messaging, the actor is the URI of the Web service.

This property is read-only.

fault_code Property

Specifies the error code.

Syntax

def get_fault_code() -> str: ...

fault_code = property(get_fault_code, None)

Default Value

""

Remarks

Use this property to get the standard code that provides more information about the fault. A set of code values is predefined by the SOAP specification. This set of fault code values can be extended by the application.

This property is read-only.

fault_detail Property

Contains application-specific error information.

Syntax

def get_fault_detail() -> str: ...

fault_detail = property(get_fault_detail, None)

Default Value

""

Remarks

Use this property to get the application-specific information, such as the exception that was thrown. This element can be an XML structure or plain text.

This property is read-only.

fault_string Property

Specifies a human-readable description of the fault.

Syntax

def get_fault_string() -> str: ...

fault_string = property(get_fault_string, None)

Default Value

""

Remarks

Use this property to get the human-readable description of the error that happened.

This property is read-only.

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

input_bytes Property

Use this property to pass the input to class in byte array form.

Syntax

def get_input_bytes() -> bytes: ...
def set_input_bytes(value: bytes) -> None: ...

input_bytes = property(get_input_bytes, set_input_bytes)

Remarks

Assign a byte array containing the data to be processed to this property.

input_file Property

A path to the file containing the SOAP message to be sent.

Syntax

def get_input_file() -> str: ...
def set_input_file(value: str) -> None: ...

input_file = property(get_input_file, set_input_file)

Default Value

""

Remarks

Use this property to provide a full path to the file containing the SOAP message to be sent to the server.

keep_alive_policy Property

Defines the keep-alive handling policy.

Syntax

def get_keep_alive_policy() -> int: ...
def set_keep_alive_policy(value: int) -> None: ...

keep_alive_policy = property(get_keep_alive_policy, set_keep_alive_policy)

Default Value

0

Remarks

Use this property to tune-up the keep-alive mechanism as per the needs of your application.

known_cert_count Property

The number of records in the KnownCert arrays.

Syntax

def get_known_cert_count() -> int: ...
def set_known_cert_count(value: int) -> None: ...

known_cert_count = property(get_known_cert_count, set_known_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• known_cert_bytes
• known_cert_handle

The array indices start at 0 and end at known_cert_count - 1.

known_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_known_cert_bytes(known_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The known_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_cert_count property.

This property is read-only.

known_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_cert_handle(known_cert_index: int) -> int: ...
def set_known_cert_handle(known_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The known_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_cert_count property.

known_crl_count Property

The number of records in the KnownCRL arrays.

Syntax

def get_known_crl_count() -> int: ...
def set_known_crl_count(value: int) -> None: ...

known_crl_count = property(get_known_crl_count, set_known_crl_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• known_crl_bytes
• known_crl_handle

The array indices start at 0 and end at known_crl_count - 1.

known_crl_bytes Property

Returns the raw CRL data in DER format.

Syntax

def get_known_crl_bytes(known_crl_index: int) -> bytes: ...

Remarks

Returns the raw CRL data in DER format.

The known_crl_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_crl_count property.

This property is read-only.

known_crl_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_crl_handle(known_crl_index: int) -> int: ...
def set_known_crl_handle(known_crl_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The known_crl_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_crl_count property.

known_ocsp_count Property

The number of records in the KnownOCSP arrays.

Syntax

def get_known_ocsp_count() -> int: ...
def set_known_ocsp_count(value: int) -> None: ...

known_ocsp_count = property(get_known_ocsp_count, set_known_ocsp_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• known_ocsp_bytes
• known_ocsp_handle

The array indices start at 0 and end at known_ocsp_count - 1.

known_ocsp_bytes Property

A buffer containing the raw OCSP response data.

Syntax

def get_known_ocsp_bytes(known_ocsp_index: int) -> bytes: ...

Remarks

A buffer containing the raw OCSP response data.

The known_ocsp_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_ocsp_count property.

This property is read-only.

known_ocsp_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_known_ocsp_handle(known_ocsp_index: int) -> int: ...
def set_known_ocsp_handle(known_ocsp_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The known_ocsp_index parameter specifies the index of the item in the array. The size of the array is controlled by the known_ocsp_count property.

mime_type Property

Specifies the SOAP message MIME type.

Syntax

def get_mime_type() -> str: ...
def set_mime_type(value: str) -> None: ...

mime_type = property(get_mime_type, set_mime_type)

Default Value

""

Remarks

Use this property to specify the MIME type attribute of the SOAP message.

operation_name Property

Specifies the SOAP operation name.

Syntax

def get_operation_name() -> str: ...
def set_operation_name(value: str) -> None: ...

operation_name = property(get_operation_name, set_operation_name)

Default Value

""

Remarks

Use this property to specify the name of the operation that the SOAP message corresponds to.

Set this property if input_file, input_bytes or input_stream only contains the parameters of the operation in XML format. In this case, a new SOAP message will be created and sent to the service.

If one of the Input properties contains a valid SOAP message or an operation request in XML format, this property can be left empty.

operation_namespace_uri Property

Specifies the SOAP message operation namespace URI.

Syntax

def get_operation_namespace_uri() -> str: ...
def set_operation_namespace_uri(value: str) -> None: ...

operation_namespace_uri = property(get_operation_namespace_uri, set_operation_namespace_uri)

Default Value

""

Remarks

This property specifies the operation namespace URI of the SOAP message.

operation_response_name Property

Specifies the operation name of the response message.

Syntax

def get_operation_response_name() -> str: ...

operation_response_name = property(get_operation_response_name, None)

Default Value

""

Remarks

Use this property to get the operation name from the response message received from the SOAP service.

This property is read-only.

operation_response_namespace_uri Property

Specifies the response SOAP message operation namespace URI.

Syntax

def get_operation_response_namespace_uri() -> str: ...

operation_response_namespace_uri = property(get_operation_response_namespace_uri, None)

Default Value

""

Remarks

Use this property to get the operation namespace URI from the response SOAP message.

This property is read-only.

operation_response_text_content Property

Returns the text content of the response message.

Syntax

def get_operation_response_text_content() -> str: ...

operation_response_text_content = property(get_operation_response_text_content, None)

Default Value

""

Remarks

Use this property to get the text content of the operation of the response SOAP message.

This property is read-only.

operation_response_xml Property

Returns the XML content of the response SOAP message.

Syntax

def get_operation_response_xml() -> str: ...

operation_response_xml = property(get_operation_response_xml, None)

Default Value

""

Remarks

Use this property to get the XML content of the response message.

This property is read-only.

output_attachment_bytes Property

Use this property to read the attachment received from the service.

Syntax

def get_output_attachment_bytes() -> bytes: ...

output_attachment_bytes = property(get_output_attachment_bytes, None)

Remarks

Check the content of this property after the operation has completed to read the received attachment data.

This property will only be set if output_attachment_file and output_attachment_stream properties had not been assigned.

This property is read-only.

output_attachment_file Property

A path to a file where to save the attachment data.

Syntax

def get_output_attachment_file() -> str: ...
def set_output_attachment_file(value: str) -> None: ...

output_attachment_file = property(get_output_attachment_file, set_output_attachment_file)

Default Value

""

Remarks

Provide a full path to the file where the attachment should be saved.

output_bytes Property

Use this property to read the output the class object has produced.

Syntax

def get_output_bytes() -> bytes: ...

output_bytes = property(get_output_bytes, None)

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the output_file and output_stream properties had not been assigned.

This property is read-only.

output_file Property

A file where the response will be saved.

Syntax

def get_output_file() -> str: ...
def set_output_file(value: str) -> None: ...

output_file = property(get_output_file, set_output_file)

Default Value

""

Remarks

Provide a full path to the file where the service response should be saved.

proxy_address Property

The IP address of the proxy server.

Syntax

def get_proxy_address() -> str: ...
def set_proxy_address(value: str) -> None: ...

proxy_address = property(get_proxy_address, set_proxy_address)

Default Value

""

Remarks

The IP address of the proxy server.

proxy_authentication Property

The authentication type used by the proxy server.

Syntax

def get_proxy_authentication() -> int: ...
def set_proxy_authentication(value: int) -> None: ...

proxy_authentication = property(get_proxy_authentication, set_proxy_authentication)

Default Value

0

Remarks

The authentication type used by the proxy server.

proxy_password Property

The password to authenticate to the proxy server.

Syntax

def get_proxy_password() -> str: ...
def set_proxy_password(value: str) -> None: ...

proxy_password = property(get_proxy_password, set_proxy_password)

Default Value

""

Remarks

The password to authenticate to the proxy server.

proxy_port Property

The port on the proxy server to connect to.

Syntax

def get_proxy_port() -> int: ...
def set_proxy_port(value: int) -> None: ...

proxy_port = property(get_proxy_port, set_proxy_port)

Default Value

0

Remarks

The port on the proxy server to connect to.

proxy_proxy_type Property

The type of the proxy server.

Syntax

def get_proxy_proxy_type() -> int: ...
def set_proxy_proxy_type(value: int) -> None: ...

proxy_proxy_type = property(get_proxy_proxy_type, set_proxy_proxy_type)

Default Value

0

Remarks

The type of the proxy server.

The WebTunnel proxy is also known as HTTPS proxy. Unlike HTTP proxy, HTTPS proxy (WebTunnel) provides end-to-end security.

proxy_request_headers Property

Contains HTTP request headers for WebTunnel and HTTP proxy.

Syntax

def get_proxy_request_headers() -> str: ...
def set_proxy_request_headers(value: str) -> None: ...

proxy_request_headers = property(get_proxy_request_headers, set_proxy_request_headers)

Default Value

""

Remarks

Contains HTTP request headers for WebTunnel and HTTP proxy.

proxy_response_body Property

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

Syntax

def get_proxy_response_body() -> str: ...
def set_proxy_response_body(value: str) -> None: ...

proxy_response_body = property(get_proxy_response_body, set_proxy_response_body)

Default Value

""

Remarks

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

proxy_response_headers Property

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

Syntax

def get_proxy_response_headers() -> str: ...
def set_proxy_response_headers(value: str) -> None: ...

proxy_response_headers = property(get_proxy_response_headers, set_proxy_response_headers)

Default Value

""

Remarks

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

proxy_use_ipv6 Property

Specifies whether IPv6 should be used when connecting through the proxy.

Syntax

def get_proxy_use_ipv6() -> bool: ...
def set_proxy_use_ipv6(value: bool) -> None: ...

proxy_use_ipv6 = property(get_proxy_use_ipv6, set_proxy_use_ipv6)

Default Value

FALSE

Remarks

Specifies whether IPv6 should be used when connecting through the proxy.

proxy_use_proxy Property

Enables or disables proxy-driven connection.

Syntax

def get_proxy_use_proxy() -> bool: ...
def set_proxy_use_proxy(value: bool) -> None: ...

proxy_use_proxy = property(get_proxy_use_proxy, set_proxy_use_proxy)

Default Value

FALSE

Remarks

Enables or disables proxy-driven connection.

proxy_username Property

Specifies the username credential for proxy authentication.

Syntax

def get_proxy_username() -> str: ...
def set_proxy_username(value: str) -> None: ...

proxy_username = property(get_proxy_username, set_proxy_username)

Default Value

""

Remarks

Specifies the username credential for proxy authentication.

reason_phrase Property

Contains the Reason Phrase element of the server's response.

Syntax

def get_reason_phrase() -> str: ...

reason_phrase = property(get_reason_phrase, None)

Default Value

""

Remarks

Use this property to access the reason phrase supplied by the server in its response (such as OK in HTTP 200 OK).

This property is read-only.

req_header_count Property

The number of records in the ReqHeader arrays.

Syntax

def get_req_header_count() -> int: ...
def set_req_header_count(value: int) -> None: ...

req_header_count = property(get_req_header_count, set_req_header_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• req_header_category
• req_header_format
• req_header_name
• req_header_value

The array indices start at 0 and end at req_header_count - 1.

req_header_category Property

Specifies the string category of the contained value.

Syntax

def get_req_header_category(req_header_index: int) -> str: ...
def set_req_header_category(req_header_index: int, value: str) -> None: ...

Default Value

""

Remarks

Specifies the string category of the contained value.

This property allows to check or set the category (or type) associated with the contained value. Depending on the format used to load or save the string, the category parameter may or may not be used.

For example, for ASN.1 property lists the category contains the ASN.1 tag of the contained data (OCTETSTRING, UTF8STRING, INTEGER, ...). For basic (name, value) pairs, such as HTTP headers, the category parameter is not used.

The req_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the req_header_count property.

req_header_format Property

Specifies the format (encoding) of the value contained in the Value property.

Syntax

def get_req_header_format(req_header_index: int) -> int: ...
def set_req_header_format(req_header_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the format (encoding) of the value contained in the req_header_value property.

Use this property to check or set the format of the contained value. Remember to provide the actual value in the appropriate format that matches this setting: utils.NameValuePairs[0].Name = "key"; utils.NameValuePairs[0].Format = svfBinary; utils.NameValuePairs[0].Name = "0a1b2c3d4e5f6071";

The following formats are currently supported:

The req_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the req_header_count property.

req_header_name Property

The name element in a (name, value) pair.

Syntax

def get_req_header_name(req_header_index: int) -> str: ...
def set_req_header_name(req_header_index: int, value: str) -> None: ...

Default Value

""

Remarks

The name element in a (name, value) pair.

The req_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the req_header_count property.

req_header_value Property

The value element in a (name, value) pair.

Syntax

def get_req_header_value(req_header_index: int) -> str: ...
def set_req_header_value(req_header_index: int, value: str) -> None: ...

Default Value

""

Remarks

The value element in a (name, value) pair.

The req_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the req_header_count property.

req_params_accept Property

Specifies the Accept header property of the HTTP request.

Syntax

def get_req_params_accept() -> str: ...
def set_req_params_accept(value: str) -> None: ...

req_params_accept = property(get_req_params_accept, set_req_params_accept)

Default Value

""

Remarks

Specifies the Accept header field of the HTTP request. The Accept field defines which media types are accepted in the response.

req_params_accept_charset Property

Specifies the Accept-Charset header property of the HTTP request.

Syntax

def get_req_params_accept_charset() -> str: ...
def set_req_params_accept_charset(value: str) -> None: ...

req_params_accept_charset = property(get_req_params_accept_charset, set_req_params_accept_charset)

Default Value

""

Remarks

Specifies the Accept-Charset header field of the HTTP request. The Accept-Charset field specifies the character set which the client can understand.

req_params_accept_language Property

Specifies the Accept-Language header property of the HTTP request.

Syntax

def get_req_params_accept_language() -> str: ...
def set_req_params_accept_language(value: str) -> None: ...

req_params_accept_language = property(get_req_params_accept_language, set_req_params_accept_language)

Default Value

""

Remarks

Specifies the Accept-Language header field of the HTTP request. The Accept-Language field specifies the language (and locale) which the client can understand.

req_params_accept_range_end Property

This property, in combination with AcceptRangeStart, defines the media-range of the HTTP request.

Syntax

def get_req_params_accept_range_end() -> int: ...
def set_req_params_accept_range_end(value: int) -> None: ...

req_params_accept_range_end = property(get_req_params_accept_range_end, set_req_params_accept_range_end)

Default Value

0

Remarks

This property, in combination with AcceptRangeStart, defines the media-range of the HTTP request.

req_params_accept_range_start Property

This property, in combination with AcceptRangeEnd, defines the media-range of the HTTP request.

Syntax

def get_req_params_accept_range_start() -> int: ...
def set_req_params_accept_range_start(value: int) -> None: ...

req_params_accept_range_start = property(get_req_params_accept_range_start, set_req_params_accept_range_start)

Default Value

0

Remarks

This property, in combination with AcceptRangeEnd, defines the media-range of the HTTP request.

req_params_authorization Property

Specifies the Authorization header of the HTTP request.

Syntax

def get_req_params_authorization() -> str: ...
def set_req_params_authorization(value: str) -> None: ...

req_params_authorization = property(get_req_params_authorization, set_req_params_authorization)

Default Value

""

Remarks

Specifies the Authorization header of the HTTP request. This header contains the credentials to authenticate a user with a server.

req_params_connection Property

Specifies the value to pass to the Connection header property of HTTP request.

Syntax

def get_req_params_connection() -> str: ...
def set_req_params_connection(value: str) -> None: ...

req_params_connection = property(get_req_params_connection, set_req_params_connection)

Default Value

""

Remarks

Specifies the value to pass to the Connection header field of HTTP request.

req_params_content_length Property

Specifies the size of the entity-body of the HTTP request.

Syntax

def get_req_params_content_length() -> int: ...
def set_req_params_content_length(value: int) -> None: ...

req_params_content_length = property(get_req_params_content_length, set_req_params_content_length)

Default Value

0

Remarks

Specifies the size of the entity-body of the HTTP request. Leave this field set to 0 to make the class calculate it automatically.

req_params_content_range_end Property

Specifies the upper bound used in the Content-Range header of the HTTP request.

Syntax

def get_req_params_content_range_end() -> int: ...
def set_req_params_content_range_end(value: int) -> None: ...

req_params_content_range_end = property(get_req_params_content_range_end, set_req_params_content_range_end)

Default Value

0

Remarks

Specifies the upper bound used in the Content-Range header of the HTTP request.

req_params_content_range_full_size Property

Specifies the total length of the full entity-body of the HTTP request.

Syntax

def get_req_params_content_range_full_size() -> int: ...
def set_req_params_content_range_full_size(value: int) -> None: ...

req_params_content_range_full_size = property(get_req_params_content_range_full_size, set_req_params_content_range_full_size)

Default Value

0

Remarks

Specifies the total length of the full entity-body of the HTTP request.

req_params_content_range_start Property

Specifies the lower bound used in the Content-Range header of the HTTP request.

Syntax

def get_req_params_content_range_start() -> int: ...
def set_req_params_content_range_start(value: int) -> None: ...

req_params_content_range_start = property(get_req_params_content_range_start, set_req_params_content_range_start)

Default Value

0

Remarks

Specifies the lower bound used in the Content-Range header of the HTTP request.

req_params_content_type Property

The Content-Type header property of the HTTP request.

Syntax

def get_req_params_content_type() -> str: ...
def set_req_params_content_type(value: str) -> None: ...

req_params_content_type = property(get_req_params_content_type, set_req_params_content_type)

Default Value

""

Remarks

The Content-Type header field of the HTTP request.

req_params_cookie Property

This header is expected to be assigned with cookies previously received from the server and stored by the client.

Syntax

def get_req_params_cookie() -> str: ...
def set_req_params_cookie(value: str) -> None: ...

req_params_cookie = property(get_req_params_cookie, set_req_params_cookie)

Default Value

""

Remarks

This header is expected to be assigned with cookies previously received from the server and stored by the client.

req_params_custom_headers Property

Assign any custom HTTP headers to be passed to the server to this property.

Syntax

def get_req_params_custom_headers() -> str: ...
def set_req_params_custom_headers(value: str) -> None: ...

req_params_custom_headers = property(get_req_params_custom_headers, set_req_params_custom_headers)

Default Value

""

Remarks

Assign any custom HTTP headers to be passed to the server to this property.

req_params_date Property

The date and time of the request.

Syntax

def get_req_params_date() -> str: ...
def set_req_params_date(value: str) -> None: ...

req_params_date = property(get_req_params_date, set_req_params_date)

Default Value

""

Remarks

The date and time of the request.

req_params_from Property

Contains the From header property of the HTTP request.

Syntax

def get_req_params_from() -> str: ...
def set_req_params_from(value: str) -> None: ...

req_params_from = property(get_req_params_from, set_req_params_from)

Default Value

""

Remarks

Contains the From header field of the HTTP request. It specifies the e-mail address for the human user who controls the requesting user agent.

req_params_host Property

This property contains the Host header property of the HTTP request.

Syntax

def get_req_params_host() -> str: ...
def set_req_params_host(value: str) -> None: ...

req_params_host = property(get_req_params_host, set_req_params_host)

Default Value

""

Remarks

This property contains the Host header field of the HTTP request. It specifies the host and port number of the resource being requested.

req_params_http_version Property

Specifies the version of HTTP protocol to use: 1.

Syntax

def get_req_params_http_version() -> int: ...
def set_req_params_http_version(value: int) -> None: ...

req_params_http_version = property(get_req_params_http_version, set_req_params_http_version)

Default Value

1

Remarks

Specifies the version of HTTP protocol to use: 1.0 or 1.1.

req_params_if_match Property

Contains the If-Match request header property.

Syntax

def get_req_params_if_match() -> str: ...
def set_req_params_if_match(value: str) -> None: ...

req_params_if_match = property(get_req_params_if_match, set_req_params_if_match)

Default Value

""

Remarks

Contains the If-Match request header field. This property makes the requested method conditional: when If-Match field is set, only the entities matching the included entity tags will be returned by the server.

req_params_if_modified_since Property

Contains the If-Modified-Since request header property.

Syntax

def get_req_params_if_modified_since() -> str: ...
def set_req_params_if_modified_since(value: str) -> None: ...

req_params_if_modified_since = property(get_req_params_if_modified_since, set_req_params_if_modified_since)

Default Value

""

Remarks

Contains the If-Modified-Since request header field. This property makes the requested method conditional: when If-Modified-Since field is set, only the modified entities will be returned by the server.

req_params_if_none_match Property

Contains the If-None-Match request header property.

Syntax

def get_req_params_if_none_match() -> str: ...
def set_req_params_if_none_match(value: str) -> None: ...

req_params_if_none_match = property(get_req_params_if_none_match, set_req_params_if_none_match)

Default Value

""

Remarks

Contains the If-None-Match request header field. This property makes the requested method conditional: when If-None-Match field is set, only the entities which doesn't match the included entity tags will be returned by the server.

req_params_if_unmodified_since Property

Contains the If-Unmodified-Since request header property.

Syntax

def get_req_params_if_unmodified_since() -> str: ...
def set_req_params_if_unmodified_since(value: str) -> None: ...

req_params_if_unmodified_since = property(get_req_params_if_unmodified_since, set_req_params_if_unmodified_since)

Default Value

""

Remarks

Contains the If-Unmodified-Since request header field. This property makes the requested method conditional: when If-Unmodified-Since field is set, only the unmodified entities will be returned by the server.

req_params_password Property

Assign this property with the user's password.

Syntax

def get_req_params_password() -> str: ...
def set_req_params_password(value: str) -> None: ...

req_params_password = property(get_req_params_password, set_req_params_password)

Default Value

""

Remarks

Assign this property with the user's password.

req_params_referer Property

The Referer property of the HTTP request header specifies the address of the resource from which the Request-URI was obtained (the referrer).

Syntax

def get_req_params_referer() -> str: ...
def set_req_params_referer(value: str) -> None: ...

req_params_referer = property(get_req_params_referer, set_req_params_referer)

Default Value

""

Remarks

The Referer field of the HTTP request header specifies the address of the resource from which the Request-URI was obtained (the referrer).

req_params_user_agent Property

The User-Agent property of the HTTP request provides information about the software that initiates the request.

Syntax

def get_req_params_user_agent() -> str: ...
def set_req_params_user_agent(value: str) -> None: ...

req_params_user_agent = property(get_req_params_user_agent, set_req_params_user_agent)

Default Value

""

Remarks

The User-Agent field of the HTTP request provides information about the software that initiates the request.

req_params_username Property

Assign this property with the user's login name.

Syntax

def get_req_params_username() -> str: ...
def set_req_params_username(value: str) -> None: ...

req_params_username = property(get_req_params_username, set_req_params_username)

Default Value

""

Remarks

Assign this property with the user's login name.

resp_header_count Property

The number of records in the RespHeader arrays.

Syntax

def get_resp_header_count() -> int: ...

resp_header_count = property(get_resp_header_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• resp_header_category
• resp_header_format
• resp_header_name
• resp_header_value

The array indices start at 0 and end at resp_header_count - 1.

This property is read-only.

resp_header_category Property

Specifies the string category of the contained value.

Syntax

def get_resp_header_category(resp_header_index: int) -> str: ...

Default Value

""

Remarks

Specifies the string category of the contained value.

This property allows to check or set the category (or type) associated with the contained value. Depending on the format used to load or save the string, the category parameter may or may not be used.

For example, for ASN.1 property lists the category contains the ASN.1 tag of the contained data (OCTETSTRING, UTF8STRING, INTEGER, ...). For basic (name, value) pairs, such as HTTP headers, the category parameter is not used.

The resp_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the resp_header_count property.

This property is read-only.

resp_header_format Property

Specifies the format (encoding) of the value contained in the Value property.

Syntax

def get_resp_header_format(resp_header_index: int) -> int: ...

Default Value

0

Remarks

Specifies the format (encoding) of the value contained in the resp_header_value property.

Use this property to check or set the format of the contained value. Remember to provide the actual value in the appropriate format that matches this setting: utils.NameValuePairs[0].Name = "key"; utils.NameValuePairs[0].Format = svfBinary; utils.NameValuePairs[0].Name = "0a1b2c3d4e5f6071";

The following formats are currently supported:

The resp_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the resp_header_count property.

This property is read-only.

resp_header_name Property

The name element in a (name, value) pair.

Syntax

def get_resp_header_name(resp_header_index: int) -> str: ...

Default Value

""

Remarks

The name element in a (name, value) pair.

The resp_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the resp_header_count property.

This property is read-only.

resp_header_value Property

The value element in a (name, value) pair.

Syntax

def get_resp_header_value(resp_header_index: int) -> str: ...

Default Value

""

Remarks

The value element in a (name, value) pair.

The resp_header_index parameter specifies the index of the item in the array. The size of the array is controlled by the resp_header_count property.

This property is read-only.

resp_params_content_length Property

Indicates the length of the response content in bytes.

Syntax

def get_resp_params_content_length() -> int: ...

resp_params_content_length = property(get_resp_params_content_length, None)

Default Value

0

Remarks

Indicates the length of the response content in bytes.

This property is read-only.

resp_params_date Property

The date and time at which the response was generated, in server time, in UTC.

Syntax

def get_resp_params_date() -> str: ...

resp_params_date = property(get_resp_params_date, None)

Default Value

""

Remarks

The date and time at which the response was generated, in server time, in UTC.

This property is read-only.

resp_params_reason_phrase Property

Contains the reason phrase (a human-readable comment) of the request processing status, which corresponds to, and complements, the staus code.

Syntax

def get_resp_params_reason_phrase() -> str: ...

resp_params_reason_phrase = property(get_resp_params_reason_phrase, None)

Default Value

""

Remarks

Contains the reason phrase (a human-readable comment) of the request processing status, which corresponds to, and complements, the staus code.

This property is read-only.

resp_params_status_code Property

The server-generated status code of the request processing status.

Syntax

def get_resp_params_status_code() -> int: ...

resp_params_status_code = property(get_resp_params_status_code, None)

Default Value

0

Remarks

The server-generated status code of the request processing status.

The code is a 3-digit integer where the first digit defines the class of the response:

Common examples are 200 (page served succesfully), 404 (page not found), 302 (redirect), and 500 (internal server error).

This property is read-only.

server_cert_count Property

The number of records in the ServerCert arrays.

Syntax

def get_server_cert_count() -> int: ...

server_cert_count = property(get_server_cert_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

• server_cert_bytes
• server_cert_ca_key_id
• server_cert_fingerprint
• server_cert_handle
• server_cert_issuer
• server_cert_issuer_rdn
• server_cert_key_algorithm
• server_cert_key_bits
• server_cert_key_fingerprint
• server_cert_key_usage
• server_cert_public_key_bytes
• server_cert_self_signed
• server_cert_serial_number
• server_cert_sig_algorithm
• server_cert_subject
• server_cert_subject_key_id
• server_cert_subject_rdn
• server_cert_valid_from
• server_cert_valid_to

The array indices start at 0 and end at server_cert_count - 1.

This property is read-only.

server_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_server_cert_bytes(server_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's private key.

Syntax

def get_server_cert_ca_key_id(server_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's private key.

Authority Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates produced by the same issuer, but with different public keys.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_server_cert_fingerprint(server_cert_index: int) -> bytes: ...

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_server_cert_handle(server_cert_index: int) -> int: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_server_cert_issuer(server_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_issuer_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

Syntax

def get_server_cert_issuer_rdn(server_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate issuer.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_server_cert_key_algorithm(server_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_bits Property

Returns the length of the public key.

Syntax

def get_server_cert_key_bits(server_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the length of the public key.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_fingerprint Property

Returns a fingerprint of the public key contained in the certificate.

Syntax

def get_server_cert_key_fingerprint(server_cert_index: int) -> bytes: ...

Remarks

Returns a fingerprint of the public key contained in the certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_server_cert_key_usage(server_cert_index: int) -> int: ...

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_server_cert_public_key_bytes(server_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_server_cert_self_signed(server_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_server_cert_serial_number(server_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_server_cert_sig_algorithm(server_cert_index: int) -> str: ...

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_server_cert_subject(server_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject_key_id Property

Contains a unique identifier (fingerprint) of the certificate's private key.

Syntax

def get_server_cert_subject_key_id(server_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier (fingerprint) of the certificate's private key.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented with a SHA1 hash of the bit string of the subject public key.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_subject_rdn Property

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

Syntax

def get_server_cert_subject_rdn(server_cert_index: int) -> str: ...

Default Value

""

Remarks

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the certificate holder (subject).

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_server_cert_valid_from(server_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

server_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_server_cert_valid_to(server_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the server_cert_count property.

This property is read-only.

soap_action Property

Specifies the SOAP action.

Syntax

def get_soap_action() -> str: ...
def set_soap_action(value: str) -> None: ...

soap_action = property(get_soap_action, set_soap_action)

Default Value

""

Remarks

Use this property to specify the value for the SOAPAction/action HTTP request header field. This field is normally used to indicate the intent of the SOAP request.

soap_response_type Property

The type of the response.

Syntax

def get_soap_response_type() -> int: ...

soap_response_type = property(get_soap_response_type, None)

Default Value

0

Remarks

Use this property to learn about the type (format) of the response provided by the SOAP service.

This property is read-only.

soap_version Property

Specifies SOAP version.

Syntax

def get_soap_version() -> int: ...
def set_soap_version(value: int) -> None: ...

soap_version = property(get_soap_version, set_soap_version)

Default Value

0

Remarks

This property specifies the version of the SOAP protocol. This SOAP version will be used to create a SOAP message (if needed) and to communicate with the service.

socket_dns_mode Property

Selects the DNS resolver to use: the class's (secure) built-in one, or the one provided by the system.

Syntax

def get_socket_dns_mode() -> int: ...
def set_socket_dns_mode(value: int) -> None: ...

socket_dns_mode = property(get_socket_dns_mode, set_socket_dns_mode)

Default Value

0

Remarks

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.

socket_dns_port Property

Specifies the port number to be used for sending queries to the DNS server.

Syntax

def get_socket_dns_port() -> int: ...
def set_socket_dns_port(value: int) -> None: ...

socket_dns_port = property(get_socket_dns_port, set_socket_dns_port)

Default Value

0

Remarks

Specifies the port number to be used for sending queries to the DNS server.

socket_dns_query_timeout Property

The timeout (in milliseconds) for each DNS query.

Syntax

def get_socket_dns_query_timeout() -> int: ...
def set_socket_dns_query_timeout(value: int) -> None: ...

socket_dns_query_timeout = property(get_socket_dns_query_timeout, set_socket_dns_query_timeout)

Default Value

0

Remarks

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

socket_dns_servers Property

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

Syntax

def get_socket_dns_servers() -> str: ...
def set_socket_dns_servers(value: str) -> None: ...

socket_dns_servers = property(get_socket_dns_servers, set_socket_dns_servers)

Default Value

""

Remarks

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

socket_dns_total_timeout Property

The timeout (in milliseconds) for the whole resolution process.

Syntax

def get_socket_dns_total_timeout() -> int: ...
def set_socket_dns_total_timeout(value: int) -> None: ...

socket_dns_total_timeout = property(get_socket_dns_total_timeout, set_socket_dns_total_timeout)

Default Value

0

Remarks

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

""

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

0

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

status_code Property

Contains the Status Code element of the server's response.

Syntax

def get_status_code() -> int: ...

status_code = property(get_status_code, None)

Default Value

0

Remarks

Use this property to access the status code supplied by the server in its response (such as 200 in HTTP 200 OK).

This property is read-only.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by tls_base_configuration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

• NULL_NULL_NULL
• RSA_NULL_MD5
• RSA_NULL_SHA
• RSA_RC4_MD5
• RSA_RC4_SHA
• RSA_RC2_MD5
• RSA_IDEA_MD5
• RSA_IDEA_SHA
• RSA_DES_MD5
• RSA_DES_SHA
• RSA_3DES_MD5
• RSA_3DES_SHA
• RSA_AES128_SHA
• RSA_AES256_SHA
• DH_DSS_DES_SHA
• DH_DSS_3DES_SHA
• DH_DSS_AES128_SHA
• DH_DSS_AES256_SHA
• DH_RSA_DES_SHA
• DH_RSA_3DES_SHA
• DH_RSA_AES128_SHA
• DH_RSA_AES256_SHA
• DHE_DSS_DES_SHA
• DHE_DSS_3DES_SHA
• DHE_DSS_AES128_SHA
• DHE_DSS_AES256_SHA
• DHE_RSA_DES_SHA
• DHE_RSA_3DES_SHA
• DHE_RSA_AES128_SHA
• DHE_RSA_AES256_SHA
• DH_ANON_RC4_MD5
• DH_ANON_DES_SHA
• DH_ANON_3DES_SHA
• DH_ANON_AES128_SHA
• DH_ANON_AES256_SHA
• RSA_RC2_MD5_EXPORT
• RSA_RC4_MD5_EXPORT
• RSA_DES_SHA_EXPORT
• DH_DSS_DES_SHA_EXPORT
• DH_RSA_DES_SHA_EXPORT
• DHE_DSS_DES_SHA_EXPORT
• DHE_RSA_DES_SHA_EXPORT
• DH_ANON_RC4_MD5_EXPORT
• DH_ANON_DES_SHA_EXPORT
• RSA_CAMELLIA128_SHA
• DH_DSS_CAMELLIA128_SHA
• DH_RSA_CAMELLIA128_SHA
• DHE_DSS_CAMELLIA128_SHA
• DHE_RSA_CAMELLIA128_SHA
• DH_ANON_CAMELLIA128_SHA
• RSA_CAMELLIA256_SHA
• DH_DSS_CAMELLIA256_SHA
• DH_RSA_CAMELLIA256_SHA
• DHE_DSS_CAMELLIA256_SHA
• DHE_RSA_CAMELLIA256_SHA
• DH_ANON_CAMELLIA256_SHA
• PSK_RC4_SHA
• PSK_3DES_SHA
• PSK_AES128_SHA
• PSK_AES256_SHA
• DHE_PSK_RC4_SHA
• DHE_PSK_3DES_SHA
• DHE_PSK_AES128_SHA
• DHE_PSK_AES256_SHA
• RSA_PSK_RC4_SHA
• RSA_PSK_3DES_SHA
• RSA_PSK_AES128_SHA
• RSA_PSK_AES256_SHA
• RSA_SEED_SHA
• DH_DSS_SEED_SHA
• DH_RSA_SEED_SHA
• DHE_DSS_SEED_SHA
• DHE_RSA_SEED_SHA
• DH_ANON_SEED_SHA
• SRP_SHA_3DES_SHA
• SRP_SHA_RSA_3DES_SHA
• SRP_SHA_DSS_3DES_SHA
• SRP_SHA_AES128_SHA
• SRP_SHA_RSA_AES128_SHA
• SRP_SHA_DSS_AES128_SHA
• SRP_SHA_AES256_SHA
• SRP_SHA_RSA_AES256_SHA
• SRP_SHA_DSS_AES256_SHA
• ECDH_ECDSA_NULL_SHA
• ECDH_ECDSA_RC4_SHA
• ECDH_ECDSA_3DES_SHA
• ECDH_ECDSA_AES128_SHA
• ECDH_ECDSA_AES256_SHA
• ECDHE_ECDSA_NULL_SHA
• ECDHE_ECDSA_RC4_SHA
• ECDHE_ECDSA_3DES_SHA
• ECDHE_ECDSA_AES128_SHA
• ECDHE_ECDSA_AES256_SHA
• ECDH_RSA_NULL_SHA
• ECDH_RSA_RC4_SHA
• ECDH_RSA_3DES_SHA
• ECDH_RSA_AES128_SHA
• ECDH_RSA_AES256_SHA
• ECDHE_RSA_NULL_SHA
• ECDHE_RSA_RC4_SHA
• ECDHE_RSA_3DES_SHA
• ECDHE_RSA_AES128_SHA
• ECDHE_RSA_AES256_SHA
• ECDH_ANON_NULL_SHA
• ECDH_ANON_RC4_SHA
• ECDH_ANON_3DES_SHA
• ECDH_ANON_AES128_SHA
• ECDH_ANON_AES256_SHA
• RSA_NULL_SHA256
• RSA_AES128_SHA256
• RSA_AES256_SHA256
• DH_DSS_AES128_SHA256
• DH_RSA_AES128_SHA256
• DHE_DSS_AES128_SHA256
• DHE_RSA_AES128_SHA256
• DH_DSS_AES256_SHA256
• DH_RSA_AES256_SHA256
• DHE_DSS_AES256_SHA256
• DHE_RSA_AES256_SHA256
• DH_ANON_AES128_SHA256
• DH_ANON_AES256_SHA256
• RSA_AES128_GCM_SHA256
• RSA_AES256_GCM_SHA384
• DHE_RSA_AES128_GCM_SHA256
• DHE_RSA_AES256_GCM_SHA384
• DH_RSA_AES128_GCM_SHA256
• DH_RSA_AES256_GCM_SHA384
• DHE_DSS_AES128_GCM_SHA256
• DHE_DSS_AES256_GCM_SHA384
• DH_DSS_AES128_GCM_SHA256
• DH_DSS_AES256_GCM_SHA384
• DH_ANON_AES128_GCM_SHA256
• DH_ANON_AES256_GCM_SHA384
• ECDHE_ECDSA_AES128_SHA256
• ECDHE_ECDSA_AES256_SHA384
• ECDH_ECDSA_AES128_SHA256
• ECDH_ECDSA_AES256_SHA384
• ECDHE_RSA_AES128_SHA256
• ECDHE_RSA_AES256_SHA384
• ECDH_RSA_AES128_SHA256
• ECDH_RSA_AES256_SHA384
• ECDHE_ECDSA_AES128_GCM_SHA256
• ECDHE_ECDSA_AES256_GCM_SHA384
• ECDH_ECDSA_AES128_GCM_SHA256
• ECDH_ECDSA_AES256_GCM_SHA384
• ECDHE_RSA_AES128_GCM_SHA256
• ECDHE_RSA_AES256_GCM_SHA384
• ECDH_RSA_AES128_GCM_SHA256
• ECDH_RSA_AES256_GCM_SHA384
• PSK_AES128_GCM_SHA256
• PSK_AES256_GCM_SHA384
• DHE_PSK_AES128_GCM_SHA256
• DHE_PSK_AES256_GCM_SHA384
• RSA_PSK_AES128_GCM_SHA256
• RSA_PSK_AES256_GCM_SHA384
• PSK_AES128_SHA256
• PSK_AES256_SHA384
• PSK_NULL_SHA256
• PSK_NULL_SHA384
• DHE_PSK_AES128_SHA256
• DHE_PSK_AES256_SHA384
• DHE_PSK_NULL_SHA256
• DHE_PSK_NULL_SHA384
• RSA_PSK_AES128_SHA256
• RSA_PSK_AES256_SHA384
• RSA_PSK_NULL_SHA256
• RSA_PSK_NULL_SHA384
• RSA_CAMELLIA128_SHA256
• DH_DSS_CAMELLIA128_SHA256
• DH_RSA_CAMELLIA128_SHA256
• DHE_DSS_CAMELLIA128_SHA256
• DHE_RSA_CAMELLIA128_SHA256
• DH_ANON_CAMELLIA128_SHA256
• RSA_CAMELLIA256_SHA256
• DH_DSS_CAMELLIA256_SHA256
• DH_RSA_CAMELLIA256_SHA256
• DHE_DSS_CAMELLIA256_SHA256
• DHE_RSA_CAMELLIA256_SHA256
• DH_ANON_CAMELLIA256_SHA256
• ECDHE_ECDSA_CAMELLIA128_SHA256
• ECDHE_ECDSA_CAMELLIA256_SHA384
• ECDH_ECDSA_CAMELLIA128_SHA256
• ECDH_ECDSA_CAMELLIA256_SHA384
• ECDHE_RSA_CAMELLIA128_SHA256
• ECDHE_RSA_CAMELLIA256_SHA384
• ECDH_RSA_CAMELLIA128_SHA256
• ECDH_RSA_CAMELLIA256_SHA384
• RSA_CAMELLIA128_GCM_SHA256
• RSA_CAMELLIA256_GCM_SHA384
• DHE_RSA_CAMELLIA128_GCM_SHA256
• DHE_RSA_CAMELLIA256_GCM_SHA384
• DH_RSA_CAMELLIA128_GCM_SHA256
• DH_RSA_CAMELLIA256_GCM_SHA384
• DHE_DSS_CAMELLIA128_GCM_SHA256
• DHE_DSS_CAMELLIA256_GCM_SHA384
• DH_DSS_CAMELLIA128_GCM_SHA256
• DH_DSS_CAMELLIA256_GCM_SHA384
• DH_anon_CAMELLIA128_GCM_SHA256
• DH_anon_CAMELLIA256_GCM_SHA384
• ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
• ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
• ECDH_ECDSA_CAMELLIA128_GCM_SHA256
• ECDH_ECDSA_CAMELLIA256_GCM_SHA384
• ECDHE_RSA_CAMELLIA128_GCM_SHA256
• ECDHE_RSA_CAMELLIA256_GCM_SHA384
• ECDH_RSA_CAMELLIA128_GCM_SHA256
• ECDH_RSA_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_GCM_SHA256
• PSK_CAMELLIA256_GCM_SHA384
• DHE_PSK_CAMELLIA128_GCM_SHA256
• DHE_PSK_CAMELLIA256_GCM_SHA384
• RSA_PSK_CAMELLIA128_GCM_SHA256
• RSA_PSK_CAMELLIA256_GCM_SHA384
• PSK_CAMELLIA128_SHA256
• PSK_CAMELLIA256_SHA384
• DHE_PSK_CAMELLIA128_SHA256
• DHE_PSK_CAMELLIA256_SHA384
• RSA_PSK_CAMELLIA128_SHA256
• RSA_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_CAMELLIA128_SHA256
• ECDHE_PSK_CAMELLIA256_SHA384
• ECDHE_PSK_RC4_SHA
• ECDHE_PSK_3DES_SHA
• ECDHE_PSK_AES128_SHA
• ECDHE_PSK_AES256_SHA
• ECDHE_PSK_AES128_SHA256
• ECDHE_PSK_AES256_SHA384
• ECDHE_PSK_NULL_SHA
• ECDHE_PSK_NULL_SHA256
• ECDHE_PSK_NULL_SHA384
• ECDHE_RSA_CHACHA20_POLY1305_SHA256
• ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
• DHE_RSA_CHACHA20_POLY1305_SHA256
• PSK_CHACHA20_POLY1305_SHA256
• ECDHE_PSK_CHACHA20_POLY1305_SHA256
• DHE_PSK_CHACHA20_POLY1305_SHA256
• RSA_PSK_CHACHA20_POLY1305_SHA256
• AES128_GCM_SHA256
• AES256_GCM_SHA384
• CHACHA20_POLY1305_SHA256
• AES128_CCM_SHA256
• AES128_CCM8_SHA256

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

""

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

""

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects the renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

0

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

0

Remarks

Specifies the TLS mode to use.

tls_use_extended_master_secret Property

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables the TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables the TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

trusted_cert_count Property

The number of records in the TrustedCert arrays.

Syntax

def get_trusted_cert_count() -> int: ...
def set_trusted_cert_count(value: int) -> None: ...

trusted_cert_count = property(get_trusted_cert_count, set_trusted_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• trusted_cert_bytes
• trusted_cert_handle

The array indices start at 0 and end at trusted_cert_count - 1.

trusted_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_trusted_cert_bytes(trusted_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The trusted_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the trusted_cert_count property.

This property is read-only.

trusted_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_trusted_cert_handle(trusted_cert_index: int) -> int: ...
def set_trusted_cert_handle(trusted_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The trusted_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the trusted_cert_count property.

use_digest_auth Property

Enables or disables the HTTP Digest authentication.

Syntax

def get_use_digest_auth() -> bool: ...
def set_use_digest_auth(value: bool) -> None: ...

use_digest_auth = property(get_use_digest_auth, set_use_digest_auth)

Default Value

FALSE

Remarks

Digest authentication is more advanced than the Basic scheme, as it does not send the username and password in plain text and is immune to replay attacks.

Digest authentication is standardized in RFC 2617.

use_kerberos_auth Property

Enables Kerberos authentication mechanism.

Syntax

def get_use_kerberos_auth() -> bool: ...
def set_use_kerberos_auth(value: bool) -> None: ...

use_kerberos_auth = property(get_use_kerberos_auth, set_use_kerberos_auth)

Default Value

FALSE

Remarks

Set this property to true to enable Kerberos (Negotiate) authentication mechanism.

use_ntlm_auth Property

Enables or disables NTLM authentication.

Syntax

def get_use_ntlm_auth() -> bool: ...
def set_use_ntlm_auth(value: bool) -> None: ...

use_ntlm_auth = property(get_use_ntlm_auth, set_use_ntlm_auth)

Default Value

FALSE

Remarks

NT LAN Manager (NTLM) authentication relies on Windows credentials to authenticate the user, and requires multiple exchanges between the client and server. Generally it is considered more secure and SSO-friendly than the Digest authentication.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

send_message Method

Sends a SOAP message to the server.

Syntax

def send_message(url: str) -> None: ...

Remarks

The SendMessage() does the following:

• Loads the data from input_bytes, input_file or input_stream properties.

  If the data contains a SOAP message, no pre-send processing is performed.

  If the data contains XML content, then basing on operation_name, operation_namespace_uri and soap_version properties new SOAP envelope will be created. The XML content will be used either as either the operation itself or the operation parameters, depending on operation_name value.

• Sends the SOAP message to the service Url.

  Use soap_action, encoding and mime_type properties to set SOAP HTTP request parameters.

• If the request is successful, the received content is saved in either output_bytes, output_file or output_stream.

  If the response contains attachment(s) then on_before_receive_attachment event will be fired for each attachment, following which the attachment will be saved to either output_attachment_bytes, output_attachment_file or output_attachment_stream.

  Use soap_response_type to get the type of the received content. If the received content is recognized as a SOAP message, then operation_response_name, operation_response_namespace_uri operation_response_text_content and operation_response_xml properties will be populated.

• If an error happens during the request, an exception is thrown.

  Use soap_response_type to identify the received content. The type set to Unknown means that either a connection error has occurred or the service has returned an unexpected HTTP status code. In this case, the error details are published in status_code and reason_phrase properties.

  If soap_response_type set to a different value indicates that the service has returned HTTP status code in the range 500 - 599, indicating a service error.

  If the type of received content is SOAP message, then fault_actor, fault_code, fault_detail and fault_string properties will contain error details returned by the service.

  If the request has succeeded then the received content will also be available in either output_bytes, output_file or output_stream properties.

send_message_with_attachments Method

Sends a SOAP message with attachment(s) to the server.

Syntax

def send_message_with_attachments(url: str, primary_message_id: str) -> None: ...

Remarks

This method follows the general pattern used by send_message method. It also lets you pass a selection of attachments to the service.

Assign the attachment content to attachment_bytes, attachment_file, or attachment_stream property. Subscribe to on_before_send_attachment to pass more than one attachment.

on_before_receive_attachment Event

Marks the start of receiving an attachment.

Syntax

class SOAPClientBeforeReceiveAttachmentEventParams(object):
# In class SOAPClient:
@property
def on_before_receive_attachment() -> Callable[[SOAPClientBeforeReceiveAttachmentEventParams], None]: ...
@on_before_receive_attachment.setter
def on_before_receive_attachment(event_hook: Callable[[SOAPClientBeforeReceiveAttachmentEventParams], None]) -> None: ...

Remarks

This event fires for every new attachment being received from the service.

Tune up output_attachment_bytes, output_attachment_file or output_attachment_stream properties inside the event handler to indicate where the attachment content should be saved.

on_before_send_attachment Event

Marks the start of sending an attachment.

Syntax

class SOAPClientBeforeSendAttachmentEventParams(object):
  @property
  def last_attachment() -> bool: ...
  @last_attachment.setter
  def last_attachment(value) -> None: ...

# In class SOAPClient:
@property
def on_before_send_attachment() -> Callable[[SOAPClientBeforeSendAttachmentEventParams], None]: ...
@on_before_send_attachment.setter
def on_before_send_attachment(event_hook: Callable[[SOAPClientBeforeSendAttachmentEventParams], None]) -> None: ...

Remarks

Use either attachment_bytes, attachment_file or attachment_stream properties to pass attachment to the class.

Set LastAttachment parameter to False to indicate that you have more than one attachment to pass.

on_cookie Event

Fired to report a received cookie.

Syntax

class SOAPClientCookieEventParams(object):
  @property
  def cookie_text() -> str: ...

# In class SOAPClient:
@property
def on_cookie() -> Callable[[SOAPClientCookieEventParams], None]: ...
@on_cookie.setter
def on_cookie(event_hook: Callable[[SOAPClientCookieEventParams], None]) -> None: ...

Remarks

The CookieText parameter contains the text of the cookie.

on_document_begin Event

Marks the start of the incoming HTML document or file.

Syntax

class SOAPClientDocumentBeginEventParams(object):
# In class SOAPClient:
@property
def on_document_begin() -> Callable[[SOAPClientDocumentBeginEventParams], None]: ...
@on_document_begin.setter
def on_document_begin(event_hook: Callable[[SOAPClientDocumentBeginEventParams], None]) -> None: ...

Remarks

This event is followed by one or more on_progress calls. When the document has been received in full, the on_document_end event is fired.

on_document_end Event

Marks the successful receipt of the incoming HTML document or file.

Syntax

class SOAPClientDocumentEndEventParams(object):
# In class SOAPClient:
@property
def on_document_end() -> Callable[[SOAPClientDocumentEndEventParams], None]: ...
@on_document_end.setter
def on_document_end(event_hook: Callable[[SOAPClientDocumentEndEventParams], None]) -> None: ...

Remarks

This event fires when the document has been received in full.

on_error Event

Information about errors during data delivery.

Syntax

class SOAPClientErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class SOAPClient:
@property
def on_error() -> Callable[[SOAPClientErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[SOAPClientErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

on_external_sign Event

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

class SOAPClientExternalSignEventParams(object):
  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class SOAPClient:
@property
def on_external_sign() -> Callable[[SOAPClientExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[SOAPClientExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_headers_prepared Event

Fires when the request headers have been formed and are about to be sent to the server.

Syntax

class SOAPClientHeadersPreparedEventParams(object):
# In class SOAPClient:
@property
def on_headers_prepared() -> Callable[[SOAPClientHeadersPreparedEventParams], None]: ...
@on_headers_prepared.setter
def on_headers_prepared(event_hook: Callable[[SOAPClientHeadersPreparedEventParams], None]) -> None: ...

Remarks

The prepared headers are available in request_headers property. This event provides you the last chance to review/alter them.

on_headers_received Event

Fires when the HTTP response headers have just been received from the server.

Syntax

class SOAPClientHeadersReceivedEventParams(object):
# In class SOAPClient:
@property
def on_headers_received() -> Callable[[SOAPClientHeadersReceivedEventParams], None]: ...
@on_headers_received.setter
def on_headers_received(event_hook: Callable[[SOAPClientHeadersReceivedEventParams], None]) -> None: ...

Remarks

The received headers are available via the response_headers property.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class SOAPClientNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class SOAPClient:
@property
def on_notification() -> Callable[[SOAPClientNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[SOAPClientNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

on_progress Event

Fires periodically during the data transfer.

Syntax

class SOAPClientProgressEventParams(object):
  @property
  def total() -> int: ...

  @property
  def current() -> int: ...

  @property
  def cancel() -> bool: ...
  @cancel.setter
  def cancel(value) -> None: ...

# In class SOAPClient:
@property
def on_progress() -> Callable[[SOAPClientProgressEventParams], None]: ...
@on_progress.setter
def on_progress(event_hook: Callable[[SOAPClientProgressEventParams], None]) -> None: ...

Remarks

Use this event to check the progress of an upload or download operation. Total indicates the total number of bytes to be transferred; Current specifies how much data has been transferred so far, and Cancel gives you a chance to cancel the operation.

on_redirection Event

Fires when the server suggests a redirect.

Syntax

class SOAPClientRedirectionEventParams(object):
  @property
  def old_url() -> str: ...

  @property
  def new_url() -> str: ...
  @new_url.setter
  def new_url(value) -> None: ...

  @property
  def allow_redirection() -> bool: ...
  @allow_redirection.setter
  def allow_redirection(value) -> None: ...

# In class SOAPClient:
@property
def on_redirection() -> Callable[[SOAPClientRedirectionEventParams], None]: ...
@on_redirection.setter
def on_redirection(event_hook: Callable[[SOAPClientRedirectionEventParams], None]) -> None: ...

Remarks

This event is fired when the server suggests a redirection request (typically via a 301 or 302 response). OldURL indicates the 'from' page, and NewURL indicates the 'to' one. The destination page can be altered by the application if needed. Use AllowRedirection to block undesirable redirects.

Generally, this is a notification event: the component handles redirections automatically. Use the MaxRedirections config property to limit the number of redirection hops.

on_tls_cert_needed Event

Fires when a remote TLS party requests a client certificate.

Syntax

class SOAPClientTLSCertNeededEventParams(object):
  @property
  def host() -> str: ...

  @property
  def ca_names() -> str: ...

# In class SOAPClient:
@property
def on_tls_cert_needed() -> Callable[[SOAPClientTLSCertNeededEventParams], None]: ...
@on_tls_cert_needed.setter
def on_tls_cert_needed(event_hook: Callable[[SOAPClientTLSCertNeededEventParams], None]) -> None: ...

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the tls_client_chain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the on_tls_handshake event for the given host and, if the certificate was accepted, succeeded by the on_tls_established event.

on_tls_cert_validate Event

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

class SOAPClientTLSCertValidateEventParams(object):
  @property
  def server_host() -> str: ...

  @property
  def server_ip() -> str: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class SOAPClient:
@property
def on_tls_cert_validate() -> Callable[[SOAPClientTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[SOAPClientTLSCertValidateEventParams], None]) -> None: ...

Remarks

This event is fired during a TLS handshake. Use the tls_server_chain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

on_tls_established Event

Fires when a TLS handshake with Host successfully completes.

Syntax

class SOAPClientTLSEstablishedEventParams(object):
  @property
  def host() -> str: ...

  @property
  def version() -> str: ...

  @property
  def ciphersuite() -> str: ...

  @property
  def connection_id() -> bytes: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class SOAPClient:
@property
def on_tls_established() -> Callable[[SOAPClientTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[SOAPClientTLSEstablishedEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

on_tls_handshake Event

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

class SOAPClientTLSHandshakeEventParams(object):
  @property
  def host() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class SOAPClient:
@property
def on_tls_handshake() -> Callable[[SOAPClientTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[SOAPClientTLSHandshakeEventParams], None]) -> None: ...

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the on_tls_established event. If the server chooses to request a client certificate, the on_tls_cert_needed event will also be fired.

on_tls_psk Event

Notifies the application about the PSK key exchange.

Syntax

class SOAPClientTLSPSKEventParams(object):
  @property
  def host() -> str: ...

  @property
  def hint() -> str: ...

# In class SOAPClient:
@property
def on_tls_psk() -> Callable[[SOAPClientTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[SOAPClientTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about the beginning of TLS-PSK key exchange with Host. The Hint parameter may be used by the server to identify the key or service to use. Use the PreSharedKey field of tls_settings to provide the pre-shared key to the component.

on_tls_shutdown Event

Reports the graceful closure of a TLS connection.

Syntax

class SOAPClientTLSShutdownEventParams(object):
  @property
  def host() -> str: ...

# In class SOAPClient:
@property
def on_tls_shutdown() -> Callable[[SOAPClientTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[SOAPClientTLSShutdownEventParams], None]) -> None: ...

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

SOAPClient Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

HTTPClient Config Settings

Base Config Settings

SOAPClient Errors

SOAPClient Errors

	1048577   Invalid parameter value (SB_ERROR_INVALID_PARAMETER)
	1048578   Class is configured incorrectly (SB_ERROR_INVALID_SETUP)
	1048579   Operation cannot be executed in the current state (SB_ERROR_INVALID_STATE)
	1048580   Attempt to set an invalid value to a property (SB_ERROR_INVALID_VALUE)
	1048581   Certificate does not have its private key loaded (SB_ERROR_NO_PRIVATE_KEY)
	1048581   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER) 
	19922945   Unsupported keep-alive policy (SB_ERROR_HTTP_UNSUPPORTED_KEEPALIVEPOLICY) 
	33554689   Unexpected HTTP status code (SB_ERROR_SOAP_CLIENT_UNEXPECTED_HTTP_STATUS_CODE)
	33554690   SOAP service failed (SB_ERROR_SOAP_CLIENT_SERVICE_FAILED)