DTLSServer Class

Properties Methods Events Config Settings Errors

The DTLSServer class provides server-side functionality of the DTLS protocol.

Syntax

DTLSServer

Remarks

Use this component to receive data over a protected DTLS channel in your applcation.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


Active	Indicates whether the server is active and is listening to new connections.
BoundPort	Indicates the bound listening port.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
Host	The host to bind the listening port to.
PinnedClient	Populates the pinned client details.
PinnedClientChain	Contains the certificate chain of the pinned client.
Port	Specifies the port number to listen for connections on.
PortRangeFrom	Specifies the lower limit of the listening port range for incoming connections.
PortRangeTo	Specifies the upper limit of the listening port range for incoming connections.
SocketSettings	Manages network connection settings.
TLSServerChain	The server's TLS certificates.
TLSSettings	Manages TLS layer settings.
WebsiteName	Specifies the web site name to use in the certificate.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


BroadcastData	Broadcasts data to all connections.
BroadcastText	Broadcasts a text string to all connections.
Cleanup	Cleans up the server environment by purging expired sessions and cleaning caches.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
DropClient	Terminates a client connection.
ExportKeyMaterial	Derives key material from the session's master key using the TLS exporters scheme.
ListClients	Enumerates the connected clients.
PinClient	Takes a snapshot of the connection's properties.
ProcessPlainData	Process a plain data buffer to a connection client.
Reset	Resets the class settings.
SendData	Sends a data buffer to a connection client.
SendKeepAlive	Sends a keep-alive packet.
SendPlainData	Sends a data buffer to a connection client.
SendText	Sends a text string to a client.
Start	Starts the DTLS server.
Stop	Stops the DTLS server.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Accept	Reports an incoming connection.
Connect	Reports a new 'connection'.
Data	Supplies a data chunk received from a client.
Disconnect	Fires to report a disconnected client.
Error	Information about errors during data delivery.
ExternalSign	Handles remote or external signing initiated by the server protocol.
Notification	This event notifies the application about an underlying control flow event.
PlainData	Supplies a plain data chunk received from a client.
TLSCertValidate	Fires when a client certificate needs to be validated.
TLSEstablished	Reports the setup of a TLS session.
TLSHandshake	Fires when a newly established client connection initiates a TLS handshake.
TLSPSK	Requests a pre-shared key for TLS-PSK.
TLSShutdown	Reports closure of a TLS session.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


BoundAddress	Returns the bound address of the listening socket.
BoundPort	The port that was bound by the server.
ClientAuth	Enables or disables certificate-based client authentication.
DatagramSize	Specifies maximum size of the datagram.
DualStack	Allows the use of ip4 and ip6 simultaneously.
MaxDataSize	Specifies maximum size of the packet which will not be divided into smaller ones.
PreSharedIdentityHint	Gets or sets the PSK identity hint.
RetransmissionInterval	Specifies value of the retransmission interval.
SocketHandle	Returns the socket handle of the connected class.
SocketHandle[i]	Returns the internal socket handle.
SplitLongData	Specifies whether to split long datagrams into smaller ones.
SrtpMasterKeyLen	The SRTP master key length.
SrtpMasterSaltLen	The SRTP master salt length.
TLSExtensions	TBD.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the class.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client classes created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
PKICache	Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.
PKICachePath	Specifies the file system path where cached PKI data is stored.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseCRLObjectCaching	Specifies whether reuse of loaded CRL objects is enabled.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOCSPResponseObjectCaching	Specifies whether reuse of loaded OCSP response objects is enabled.
UseOwnDNSResolver	Specifies whether the client classes should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.
XMLRDNDescriptorName[OID]	Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.
XMLRDNDescriptorPriority[OID]	Specifies the priority of descriptor names associated with a specific OID.
XMLRDNDescriptorReverseOrder	Specifies whether to reverse the order of descriptors in RDN.
XMLRDNDescriptorSeparator	Specifies the separator used between descriptors in RDN.

Active Property (DTLSServer Class)

Indicates whether the server is active and is listening to new connections.

Syntax

ANSI (Cross Platform)
int GetActive();

Unicode (Windows)
BOOL GetActive();

int secureblackbox_dtlsserver_getactive(void* lpObj);

bool GetActive();

Default Value

FALSE

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only and not available at design time.

Data Type

Boolean

BoundPort Property (DTLSServer Class)

Indicates the bound listening port.

Syntax

ANSI (Cross Platform)
int GetBoundPort();

Unicode (Windows)
INT GetBoundPort();

int secureblackbox_dtlsserver_getboundport(void* lpObj);

int GetBoundPort();

Default Value

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals Port if it is provided, or is allocated dynamically if configured to fall in the range between PortRangeFrom and PortRangeTo constraints.

This property is read-only and not available at design time.

Data Type

Integer

ExternalCrypto Property (DTLSServer Class)

Provides access to external signing and DC parameters.

Syntax

SecureBlackboxExternalCrypto* GetExternalCrypto();

char* secureblackbox_dtlsserver_getexternalcryptoasyncdocumentid(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptoasyncdocumentid(void* lpObj, const char* lpszExternalCryptoAsyncDocumentID);

char* secureblackbox_dtlsserver_getexternalcryptocustomparams(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptocustomparams(void* lpObj, const char* lpszExternalCryptoCustomParams);

char* secureblackbox_dtlsserver_getexternalcryptodata(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptodata(void* lpObj, const char* lpszExternalCryptoData);

int secureblackbox_dtlsserver_getexternalcryptoexternalhashcalculation(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptoexternalhashcalculation(void* lpObj, int bExternalCryptoExternalHashCalculation);

char* secureblackbox_dtlsserver_getexternalcryptohashalgorithm(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptohashalgorithm(void* lpObj, const char* lpszExternalCryptoHashAlgorithm);

char* secureblackbox_dtlsserver_getexternalcryptokeyid(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptokeyid(void* lpObj, const char* lpszExternalCryptoKeyID);

char* secureblackbox_dtlsserver_getexternalcryptokeysecret(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptokeysecret(void* lpObj, const char* lpszExternalCryptoKeySecret);

int secureblackbox_dtlsserver_getexternalcryptomethod(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptomethod(void* lpObj, int iExternalCryptoMethod);

int secureblackbox_dtlsserver_getexternalcryptomode(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptomode(void* lpObj, int iExternalCryptoMode);

char* secureblackbox_dtlsserver_getexternalcryptopublickeyalgorithm(void* lpObj);
int secureblackbox_dtlsserver_setexternalcryptopublickeyalgorithm(void* lpObj, const char* lpszExternalCryptoPublicKeyAlgorithm);

QString GetExternalCryptoAsyncDocumentID();
int SetExternalCryptoAsyncDocumentID(QString qsExternalCryptoAsyncDocumentID);

QString GetExternalCryptoCustomParams();
int SetExternalCryptoCustomParams(QString qsExternalCryptoCustomParams);

QString GetExternalCryptoData();
int SetExternalCryptoData(QString qsExternalCryptoData);

bool GetExternalCryptoExternalHashCalculation();
int SetExternalCryptoExternalHashCalculation(bool bExternalCryptoExternalHashCalculation);

QString GetExternalCryptoHashAlgorithm();
int SetExternalCryptoHashAlgorithm(QString qsExternalCryptoHashAlgorithm);

QString GetExternalCryptoKeyID();
int SetExternalCryptoKeyID(QString qsExternalCryptoKeyID);

QString GetExternalCryptoKeySecret();
int SetExternalCryptoKeySecret(QString qsExternalCryptoKeySecret);

int GetExternalCryptoMethod();
int SetExternalCryptoMethod(int iExternalCryptoMethod);

int GetExternalCryptoMode();
int SetExternalCryptoMode(int iExternalCryptoMode);

QString GetExternalCryptoPublicKeyAlgorithm();
int SetExternalCryptoPublicKeyAlgorithm(QString qsExternalCryptoPublicKeyAlgorithm);

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

This property is read-only.

Data Type

SecureBlackboxExternalCrypto

FIPSMode Property (DTLSServer Class)

Reserved.

Syntax

ANSI (Cross Platform)
int GetFIPSMode();
int SetFIPSMode(int bFIPSMode);

Unicode (Windows)
BOOL GetFIPSMode();
INT SetFIPSMode(BOOL bFIPSMode);

int secureblackbox_dtlsserver_getfipsmode(void* lpObj);
int secureblackbox_dtlsserver_setfipsmode(void* lpObj, int bFIPSMode);

bool GetFIPSMode();
int SetFIPSMode(bool bFIPSMode);

Default Value

FALSE

Remarks

This property is reserved for future use.

Data Type

Boolean

Host Property (DTLSServer Class)

The host to bind the listening port to.

Syntax

ANSI (Cross Platform)
char* GetHost();
int SetHost(const char* lpszHost);

Unicode (Windows)
LPWSTR GetHost();
INT SetHost(LPCWSTR lpszHost);

char* secureblackbox_dtlsserver_gethost(void* lpObj);
int secureblackbox_dtlsserver_sethost(void* lpObj, const char* lpszHost);

QString GetHost();
int SetHost(QString qsHost);

Default Value

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

Data Type

String

PinnedClient Property (DTLSServer Class)

Populates the pinned client details.

Syntax

SecureBlackboxTLSConnectionInfo* GetPinnedClient();

int secureblackbox_dtlsserver_getpinnedclientaeadcipher(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientchainvalidationdetails(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientchainvalidationresult(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientciphersuite(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientclientauthenticated(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientclientauthrequested(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientconnectionestablished(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientconnectionid(void* lpObj, char** lpPinnedClientConnectionID, int* lenPinnedClientConnectionID);

char* secureblackbox_dtlsserver_getpinnedclientdigestalgorithm(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientencryptionalgorithm(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientexportable(void* lpObj);

int64 secureblackbox_dtlsserver_getpinnedclientid(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientkeyexchangealgorithm(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientkeyexchangekeybits(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientnamedeccurve(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientpfscipher(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientpresharedidentity(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientpresharedidentityhint(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientpublickeybits(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientremoteaddress(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientremoteport(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientresumedsession(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientsecureconnection(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientserverauthenticated(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientsignaturealgorithm(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientsymmetricblocksize(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientsymmetrickeybits(void* lpObj);

int64 secureblackbox_dtlsserver_getpinnedclienttotalbytesreceived(void* lpObj);

int64 secureblackbox_dtlsserver_getpinnedclienttotalbytessent(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientvalidationlog(void* lpObj);

char* secureblackbox_dtlsserver_getpinnedclientversion(void* lpObj);

bool GetPinnedClientAEADCipher();

int GetPinnedClientChainValidationDetails();

int GetPinnedClientChainValidationResult();

QString GetPinnedClientCiphersuite();

bool GetPinnedClientClientAuthenticated();

bool GetPinnedClientClientAuthRequested();

bool GetPinnedClientConnectionEstablished();

QByteArray GetPinnedClientConnectionID();

QString GetPinnedClientDigestAlgorithm();

QString GetPinnedClientEncryptionAlgorithm();

bool GetPinnedClientExportable();

qint64 GetPinnedClientID();

QString GetPinnedClientKeyExchangeAlgorithm();

int GetPinnedClientKeyExchangeKeyBits();

QString GetPinnedClientNamedECCurve();

bool GetPinnedClientPFSCipher();

QString GetPinnedClientPreSharedIdentity();

QString GetPinnedClientPreSharedIdentityHint();

int GetPinnedClientPublicKeyBits();

QString GetPinnedClientRemoteAddress();

int GetPinnedClientRemotePort();

bool GetPinnedClientResumedSession();

bool GetPinnedClientSecureConnection();

bool GetPinnedClientServerAuthenticated();

QString GetPinnedClientSignatureAlgorithm();

int GetPinnedClientSymmetricBlockSize();

int GetPinnedClientSymmetricKeyBits();

qint64 GetPinnedClientTotalBytesReceived();

qint64 GetPinnedClientTotalBytesSent();

QString GetPinnedClientValidationLog();

QString GetPinnedClientVersion();

Remarks

Use this property to access the details of the client connection previously pinned with PinClient method.

This property is read-only and not available at design time.

Data Type

SecureBlackboxTLSConnectionInfo

PinnedClientChain Property (DTLSServer Class)

Contains the certificate chain of the pinned client.

Syntax

SecureBlackboxList<SecureBlackboxCertificate>* GetPinnedClientChain();

int secureblackbox_dtlsserver_getpinnedclientcertcount(void* lpObj);

int secureblackbox_dtlsserver_getpinnedclientcertbytes(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertBytes, int* lenPinnedClientCertBytes);

int secureblackbox_dtlsserver_getpinnedclientcertcakeyid(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertCAKeyID, int* lenPinnedClientCertCAKeyID);

char* secureblackbox_dtlsserver_getpinnedclientcertfingerprint(void* lpObj, int pinnedclientcertindex);

int64 secureblackbox_dtlsserver_getpinnedclientcerthandle(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertissuer(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertissuerrdn(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertkeyalgorithm(void* lpObj, int pinnedclientcertindex);

int secureblackbox_dtlsserver_getpinnedclientcertkeybits(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertkeyfingerprint(void* lpObj, int pinnedclientcertindex);

int secureblackbox_dtlsserver_getpinnedclientcertkeyusage(void* lpObj, int pinnedclientcertindex);

int secureblackbox_dtlsserver_getpinnedclientcertpublickeybytes(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertPublicKeyBytes, int* lenPinnedClientCertPublicKeyBytes);

int secureblackbox_dtlsserver_getpinnedclientcertselfsigned(void* lpObj, int pinnedclientcertindex);

int secureblackbox_dtlsserver_getpinnedclientcertserialnumber(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertSerialNumber, int* lenPinnedClientCertSerialNumber);

char* secureblackbox_dtlsserver_getpinnedclientcertsigalgorithm(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertsubject(void* lpObj, int pinnedclientcertindex);

int secureblackbox_dtlsserver_getpinnedclientcertsubjectkeyid(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertSubjectKeyID, int* lenPinnedClientCertSubjectKeyID);

char* secureblackbox_dtlsserver_getpinnedclientcertsubjectrdn(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertvalidfrom(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_dtlsserver_getpinnedclientcertvalidto(void* lpObj, int pinnedclientcertindex);

int GetPinnedClientCertCount();

QByteArray GetPinnedClientCertBytes(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertCAKeyID(int iPinnedClientCertIndex);

QString GetPinnedClientCertFingerprint(int iPinnedClientCertIndex);

qint64 GetPinnedClientCertHandle(int iPinnedClientCertIndex);

QString GetPinnedClientCertIssuer(int iPinnedClientCertIndex);

QString GetPinnedClientCertIssuerRDN(int iPinnedClientCertIndex);

QString GetPinnedClientCertKeyAlgorithm(int iPinnedClientCertIndex);

int GetPinnedClientCertKeyBits(int iPinnedClientCertIndex);

QString GetPinnedClientCertKeyFingerprint(int iPinnedClientCertIndex);

int GetPinnedClientCertKeyUsage(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertPublicKeyBytes(int iPinnedClientCertIndex);

bool GetPinnedClientCertSelfSigned(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertSerialNumber(int iPinnedClientCertIndex);

QString GetPinnedClientCertSigAlgorithm(int iPinnedClientCertIndex);

QString GetPinnedClientCertSubject(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertSubjectKeyID(int iPinnedClientCertIndex);

QString GetPinnedClientCertSubjectRDN(int iPinnedClientCertIndex);

QString GetPinnedClientCertValidFrom(int iPinnedClientCertIndex);

QString GetPinnedClientCertValidTo(int iPinnedClientCertIndex);

Remarks

Use this property to access the certificate chain of the client connection pinned previously with a PinClient call.

This property is read-only and not available at design time.

Data Type

SecureBlackboxCertificate

Port Property (DTLSServer Class)

Specifies the port number to listen for connections on.

Syntax

ANSI (Cross Platform)
int GetPort();
int SetPort(int iPort);

Unicode (Windows)
INT GetPort();
INT SetPort(INT iPort);

int secureblackbox_dtlsserver_getport(void* lpObj);
int secureblackbox_dtlsserver_setport(void* lpObj, int iPort);

int GetPort();
int SetPort(int iPort);

Default Value

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via PortRangeFrom and PortRangeTo properties. In this case the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Data Type

Integer

PortRangeFrom Property (DTLSServer Class)

Specifies the lower limit of the listening port range for incoming connections.

Syntax

ANSI (Cross Platform)
int GetPortRangeFrom();
int SetPortRangeFrom(int iPortRangeFrom);

Unicode (Windows)
INT GetPortRangeFrom();
INT SetPortRangeFrom(INT iPortRangeFrom);

int secureblackbox_dtlsserver_getportrangefrom(void* lpObj);
int secureblackbox_dtlsserver_setportrangefrom(void* lpObj, int iPortRangeFrom);

int GetPortRangeFrom();
int SetPortRangeFrom(int iPortRangeFrom);

Default Value

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

PortRangeTo Property (DTLSServer Class)

Specifies the upper limit of the listening port range for incoming connections.

Syntax

ANSI (Cross Platform)
int GetPortRangeTo();
int SetPortRangeTo(int iPortRangeTo);

Unicode (Windows)
INT GetPortRangeTo();
INT SetPortRangeTo(INT iPortRangeTo);

int secureblackbox_dtlsserver_getportrangeto(void* lpObj);
int secureblackbox_dtlsserver_setportrangeto(void* lpObj, int iPortRangeTo);

int GetPortRangeTo();
int SetPortRangeTo(int iPortRangeTo);

Default Value

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

SocketSettings Property (DTLSServer Class)

Manages network connection settings.

Syntax

SecureBlackboxSocketSettings* GetSocketSettings();

int secureblackbox_dtlsserver_getsocketincomingspeedlimit(void* lpObj);
int secureblackbox_dtlsserver_setsocketincomingspeedlimit(void* lpObj, int iSocketIncomingSpeedLimit);

char* secureblackbox_dtlsserver_getsocketlocaladdress(void* lpObj);
int secureblackbox_dtlsserver_setsocketlocaladdress(void* lpObj, const char* lpszSocketLocalAddress);

int secureblackbox_dtlsserver_getsocketlocalport(void* lpObj);
int secureblackbox_dtlsserver_setsocketlocalport(void* lpObj, int iSocketLocalPort);

int secureblackbox_dtlsserver_getsocketoutgoingspeedlimit(void* lpObj);
int secureblackbox_dtlsserver_setsocketoutgoingspeedlimit(void* lpObj, int iSocketOutgoingSpeedLimit);

int secureblackbox_dtlsserver_getsockettimeout(void* lpObj);
int secureblackbox_dtlsserver_setsockettimeout(void* lpObj, int iSocketTimeout);

int secureblackbox_dtlsserver_getsocketuseipv6(void* lpObj);
int secureblackbox_dtlsserver_setsocketuseipv6(void* lpObj, int bSocketUseIPv6);

int GetSocketIncomingSpeedLimit();
int SetSocketIncomingSpeedLimit(int iSocketIncomingSpeedLimit);

QString GetSocketLocalAddress();
int SetSocketLocalAddress(QString qsSocketLocalAddress);

int GetSocketLocalPort();
int SetSocketLocalPort(int iSocketLocalPort);

int GetSocketOutgoingSpeedLimit();
int SetSocketOutgoingSpeedLimit(int iSocketOutgoingSpeedLimit);

int GetSocketTimeout();
int SetSocketTimeout(int iSocketTimeout);

bool GetSocketUseIPv6();
int SetSocketUseIPv6(bool bSocketUseIPv6);

Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Data Type

SecureBlackboxSocketSettings

TLSServerChain Property (DTLSServer Class)

The server's TLS certificates.

Syntax

SecureBlackboxList<SecureBlackboxCertificate>* GetTLSServerChain();
int SetTLSServerChain(SecureBlackboxList<SecureBlackboxCertificate>* val);

int secureblackbox_dtlsserver_gettlsservercertcount(void* lpObj);
int secureblackbox_dtlsserver_settlsservercertcount(void* lpObj, int iTLSServerCertCount);

int secureblackbox_dtlsserver_gettlsservercertbytes(void* lpObj, int tlsservercertindex, char** lpTLSServerCertBytes, int* lenTLSServerCertBytes);

int64 secureblackbox_dtlsserver_gettlsservercerthandle(void* lpObj, int tlsservercertindex);
int secureblackbox_dtlsserver_settlsservercerthandle(void* lpObj, int tlsservercertindex, int64 lTLSServerCertHandle);

int GetTLSServerCertCount();
int SetTLSServerCertCount(int iTLSServerCertCount);

QByteArray GetTLSServerCertBytes(int iTLSServerCertIndex);

qint64 GetTLSServerCertHandle(int iTLSServerCertIndex);
int SetTLSServerCertHandle(int iTLSServerCertIndex, qint64 lTLSServerCertHandle);

Remarks

Use this property to provide a list of TLS certificates for the server endpoint.

A TLS endpoint needs a certificate to be able to accept TLS connections. At least one of the certificates in the collection - the endpoint certificate - must have a private key associated with it.

The collection may include more than one endpoint certificate, and more than one chain. A typical usage scenario is to include two chains (ECDSA and RSA), to cater for clients with different cipher suite preferences.

This property is not available at design time.

Data Type

SecureBlackboxCertificate

TLSSettings Property (DTLSServer Class)

Manages TLS layer settings.

Syntax

SecureBlackboxTLSSettings* GetTLSSettings();

int secureblackbox_dtlsserver_gettlsautovalidatecertificates(void* lpObj);
int secureblackbox_dtlsserver_settlsautovalidatecertificates(void* lpObj, int bTLSAutoValidateCertificates);

int secureblackbox_dtlsserver_gettlsbaseconfiguration(void* lpObj);
int secureblackbox_dtlsserver_settlsbaseconfiguration(void* lpObj, int iTLSBaseConfiguration);

char* secureblackbox_dtlsserver_gettlsciphersuites(void* lpObj);
int secureblackbox_dtlsserver_settlsciphersuites(void* lpObj, const char* lpszTLSCiphersuites);

int secureblackbox_dtlsserver_gettlsclientauth(void* lpObj);
int secureblackbox_dtlsserver_settlsclientauth(void* lpObj, int iTLSClientAuth);

char* secureblackbox_dtlsserver_gettlseccurves(void* lpObj);
int secureblackbox_dtlsserver_settlseccurves(void* lpObj, const char* lpszTLSECCurves);

char* secureblackbox_dtlsserver_gettlsextensions(void* lpObj);
int secureblackbox_dtlsserver_settlsextensions(void* lpObj, const char* lpszTLSExtensions);

int secureblackbox_dtlsserver_gettlsforceresumeifdestinationchanges(void* lpObj);
int secureblackbox_dtlsserver_settlsforceresumeifdestinationchanges(void* lpObj, int bTLSForceResumeIfDestinationChanges);

char* secureblackbox_dtlsserver_gettlspresharedidentity(void* lpObj);
int secureblackbox_dtlsserver_settlspresharedidentity(void* lpObj, const char* lpszTLSPreSharedIdentity);

char* secureblackbox_dtlsserver_gettlspresharedkey(void* lpObj);
int secureblackbox_dtlsserver_settlspresharedkey(void* lpObj, const char* lpszTLSPreSharedKey);

char* secureblackbox_dtlsserver_gettlspresharedkeyciphersuite(void* lpObj);
int secureblackbox_dtlsserver_settlspresharedkeyciphersuite(void* lpObj, const char* lpszTLSPreSharedKeyCiphersuite);

int secureblackbox_dtlsserver_gettlsrenegotiationattackpreventionmode(void* lpObj);
int secureblackbox_dtlsserver_settlsrenegotiationattackpreventionmode(void* lpObj, int iTLSRenegotiationAttackPreventionMode);

int secureblackbox_dtlsserver_gettlsrevocationcheck(void* lpObj);
int secureblackbox_dtlsserver_settlsrevocationcheck(void* lpObj, int iTLSRevocationCheck);

int secureblackbox_dtlsserver_gettlsssloptions(void* lpObj);
int secureblackbox_dtlsserver_settlsssloptions(void* lpObj, int iTLSSSLOptions);

int secureblackbox_dtlsserver_gettlstlsmode(void* lpObj);
int secureblackbox_dtlsserver_settlstlsmode(void* lpObj, int iTLSTLSMode);

int secureblackbox_dtlsserver_gettlsuseextendedmastersecret(void* lpObj);
int secureblackbox_dtlsserver_settlsuseextendedmastersecret(void* lpObj, int bTLSUseExtendedMasterSecret);

int secureblackbox_dtlsserver_gettlsusesessionresumption(void* lpObj);
int secureblackbox_dtlsserver_settlsusesessionresumption(void* lpObj, int bTLSUseSessionResumption);

int secureblackbox_dtlsserver_gettlsversions(void* lpObj);
int secureblackbox_dtlsserver_settlsversions(void* lpObj, int iTLSVersions);

bool GetTLSAutoValidateCertificates();
int SetTLSAutoValidateCertificates(bool bTLSAutoValidateCertificates);

int GetTLSBaseConfiguration();
int SetTLSBaseConfiguration(int iTLSBaseConfiguration);

QString GetTLSCiphersuites();
int SetTLSCiphersuites(QString qsTLSCiphersuites);

int GetTLSClientAuth();
int SetTLSClientAuth(int iTLSClientAuth);

QString GetTLSECCurves();
int SetTLSECCurves(QString qsTLSECCurves);

QString GetTLSExtensions();
int SetTLSExtensions(QString qsTLSExtensions);

bool GetTLSForceResumeIfDestinationChanges();
int SetTLSForceResumeIfDestinationChanges(bool bTLSForceResumeIfDestinationChanges);

QString GetTLSPreSharedIdentity();
int SetTLSPreSharedIdentity(QString qsTLSPreSharedIdentity);

QString GetTLSPreSharedKey();
int SetTLSPreSharedKey(QString qsTLSPreSharedKey);

QString GetTLSPreSharedKeyCiphersuite();
int SetTLSPreSharedKeyCiphersuite(QString qsTLSPreSharedKeyCiphersuite);

int GetTLSRenegotiationAttackPreventionMode();
int SetTLSRenegotiationAttackPreventionMode(int iTLSRenegotiationAttackPreventionMode);

int GetTLSRevocationCheck();
int SetTLSRevocationCheck(int iTLSRevocationCheck);

int GetTLSSSLOptions();
int SetTLSSSLOptions(int iTLSSSLOptions);

int GetTLSTLSMode();
int SetTLSTLSMode(int iTLSTLSMode);

bool GetTLSUseExtendedMasterSecret();
int SetTLSUseExtendedMasterSecret(bool bTLSUseExtendedMasterSecret);

bool GetTLSUseSessionResumption();
int SetTLSUseSessionResumption(bool bTLSUseSessionResumption);

int GetTLSVersions();
int SetTLSVersions(int iTLSVersions);

Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

Data Type

SecureBlackboxTLSSettings

WebsiteName Property (DTLSServer Class)

Specifies the web site name to use in the certificate.

Syntax

ANSI (Cross Platform)
char* GetWebsiteName();
int SetWebsiteName(const char* lpszWebsiteName);

Unicode (Windows)
LPWSTR GetWebsiteName();
INT SetWebsiteName(LPCWSTR lpszWebsiteName);

char* secureblackbox_dtlsserver_getwebsitename(void* lpObj);
int secureblackbox_dtlsserver_setwebsitename(void* lpObj, const char* lpszWebsiteName);

QString GetWebsiteName();
int SetWebsiteName(QString qsWebsiteName);

Default Value

"secureblackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

Data Type

String

BroadcastData Method (DTLSServer Class)

Broadcasts data to all connections.

Syntax

ANSI (Cross Platform)
int BroadcastData(int64 lConnectionID, const char* lpData, int lenData);

Unicode (Windows)
INT BroadcastData(LONG64 lConnectionID, LPCSTR lpData, INT lenData);

int secureblackbox_dtlsserver_broadcastdata(void* lpObj, int64 lConnectionID, const char* lpData, int lenData);

int BroadcastData(qint64 lConnectionID, QByteArray qbaData);

Remarks

Call this method to send Data to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

BroadcastText Method (DTLSServer Class)

Broadcasts a text string to all connections.

Syntax

ANSI (Cross Platform)
int BroadcastText(int64 lConnectionId, const char* lpszText);

Unicode (Windows)
INT BroadcastText(LONG64 lConnectionId, LPCWSTR lpszText);

int secureblackbox_dtlsserver_broadcasttext(void* lpObj, int64 lConnectionId, const char* lpszText);

int BroadcastText(qint64 lConnectionId, const QString& qsText);

Remarks

Call this method to send Text to all active client connections except for ConnectionID. Set ConnectionID to -1 to broadcast to all connections without exceptions.

Error Handling (C++)

Cleanup Method (DTLSServer Class)

Cleans up the server environment by purging expired sessions and cleaning caches.

Syntax

ANSI (Cross Platform)
int Cleanup();

Unicode (Windows)
INT Cleanup();

int secureblackbox_dtlsserver_cleanup(void* lpObj);

int Cleanup();

Remarks

Call this method while the server is active to clean up the environment allocated for the server by releasing unused resources and cleaning caches.

Error Handling (C++)

Config Method (DTLSServer Class)

Sets or retrieves a configuration setting.

Syntax

ANSI (Cross Platform)
char* Config(const char* lpszConfigurationString);

Unicode (Windows)
LPWSTR Config(LPCWSTR lpszConfigurationString);

char* secureblackbox_dtlsserver_config(void* lpObj, const char* lpszConfigurationString);

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

DoAction Method (DTLSServer Class)

Performs an additional action.

Syntax

ANSI (Cross Platform)
char* DoAction(const char* lpszActionID, const char* lpszActionParams);

Unicode (Windows)
LPWSTR DoAction(LPCWSTR lpszActionID, LPCWSTR lpszActionParams);

char* secureblackbox_dtlsserver_doaction(void* lpObj, const char* lpszActionID, const char* lpszActionParams);

QString DoAction(const QString& qsActionID, const QString& qsActionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Common ActionIDs:


Action	Parameters	Returned value	Description
ResetTrustedListCache	none	none	Clears the cached list of trusted lists.
ResetCertificateCache	none	none	Clears the cached certificates.
ResetCRLCache	none	none	Clears the cached CRLs.
ResetOCSPResponseCache	none	none	Clears the cached OCSP responses.

Error Handling (C++)

DropClient Method (DTLSServer Class)

Terminates a client connection.

Syntax

ANSI (Cross Platform)
int DropClient(int64 lConnectionId, int bForced);

Unicode (Windows)
INT DropClient(LONG64 lConnectionId, BOOL bForced);

int secureblackbox_dtlsserver_dropclient(void* lpObj, int64 lConnectionId, int bForced);

int DropClient(qint64 lConnectionId, bool bForced);

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

Error Handling (C++)

ExportKeyMaterial Method (DTLSServer Class)

Derives key material from the session's master key using the TLS exporters scheme.

Syntax

ANSI (Cross Platform)
int ExportKeyMaterial(int64 lConnectionID, const char* lpszLbl, const char* lpContext, int lenContext, int iLen);

Unicode (Windows)
INT ExportKeyMaterial(LONG64 lConnectionID, LPCWSTR lpszLbl, LPCSTR lpContext, INT lenContext, INT iLen);

int secureblackbox_dtlsserver_exportkeymaterial(void* lpObj, int64 lConnectionID, const char* lpszLbl, const char* lpContext, int lenContext, int iLen);

int ExportKeyMaterial(qint64 lConnectionID, const QString& qsLbl, QByteArray qbaContext, int iLen);

Remarks

Some protocols - for example, SRTP - use the TLS exporters scheme to derive their own session keys from the TLS master key. This method lets you employ exporters to obtain such keys, or to generate secure keys for your own needs from an active TLS session.

The exported keys depend on the master key, and are different for every TLS session. However, a client and server sharing a session will always end up with the same key material, as long as they use the same values of Lbl, Context, and Len.

Use the ConnectionID parameter to specify the session that you would like to derive key material from.

Error Handling (C++)

ListClients Method (DTLSServer Class)

Enumerates the connected clients.

Syntax

ANSI (Cross Platform)
char* ListClients();

Unicode (Windows)
LPWSTR ListClients();

char* secureblackbox_dtlsserver_listclients(void* lpObj);

QString ListClients();

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

Error Handling (C++)

PinClient Method (DTLSServer Class)

Takes a snapshot of the connection's properties.

Syntax

ANSI (Cross Platform)
int PinClient(int64 lConnectionId);

Unicode (Windows)
INT PinClient(LONG64 lConnectionId);

int secureblackbox_dtlsserver_pinclient(void* lpObj, int64 lConnectionId);

int PinClient(qint64 lConnectionId);

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in PinnedClient and PinnedClientChain properties.

Error Handling (C++)

ProcessPlainData Method (DTLSServer Class)

Process a plain data buffer to a connection client.

Syntax

ANSI (Cross Platform)
int ProcessPlainData(int64 lConnectionID, const char* lpBuffer, int lenBuffer);

Unicode (Windows)
INT ProcessPlainData(LONG64 lConnectionID, LPCSTR lpBuffer, INT lenBuffer);

int secureblackbox_dtlsserver_processplaindata(void* lpObj, int64 lConnectionID, const char* lpBuffer, int lenBuffer);

int ProcessPlainData(qint64 lConnectionID, QByteArray qbaBuffer);

Remarks

Use this method to process a plain data buffer to a connected client. Use ConnectionID to specify the client.

Error Handling (C++)

Reset Method (DTLSServer Class)

Resets the class settings.

Syntax

ANSI (Cross Platform)
int Reset();

Unicode (Windows)
INT Reset();

int secureblackbox_dtlsserver_reset(void* lpObj);

int Reset();

Remarks

Reset is a generic method available in every class.

Error Handling (C++)

SendData Method (DTLSServer Class)

Sends a data buffer to a connection client.

Syntax

ANSI (Cross Platform)
int SendData(int64 lConnectionID, const char* lpBuffer, int lenBuffer);

Unicode (Windows)
INT SendData(LONG64 lConnectionID, LPCSTR lpBuffer, INT lenBuffer);

int secureblackbox_dtlsserver_senddata(void* lpObj, int64 lConnectionID, const char* lpBuffer, int lenBuffer);

int SendData(qint64 lConnectionID, QByteArray qbaBuffer);

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

Error Handling (C++)

SendKeepAlive Method (DTLSServer Class)

Sends a keep-alive packet.

Syntax

ANSI (Cross Platform)
int SendKeepAlive(int64 lConnectionId);

Unicode (Windows)
INT SendKeepAlive(LONG64 lConnectionId);

int secureblackbox_dtlsserver_sendkeepalive(void* lpObj, int64 lConnectionId);

int SendKeepAlive(qint64 lConnectionId);

Remarks

Use this method to send a keep-alive packet to a client. Keep alive is an empty packet; keep-alive signals sent occasionally can be used to keep connection up.

Error Handling (C++)

SendPlainData Method (DTLSServer Class)

Sends a data buffer to a connection client.

Syntax

ANSI (Cross Platform)
int SendPlainData(int64 lConnectionID, const char* lpBuffer, int lenBuffer);

Unicode (Windows)
INT SendPlainData(LONG64 lConnectionID, LPCSTR lpBuffer, INT lenBuffer);

int secureblackbox_dtlsserver_sendplaindata(void* lpObj, int64 lConnectionID, const char* lpBuffer, int lenBuffer);

int SendPlainData(qint64 lConnectionID, QByteArray qbaBuffer);

Remarks

Use this method to send a data buffer to a connected client. Use ConnectionID to specify the client.

Error Handling (C++)

SendText Method (DTLSServer Class)

Sends a text string to a client.

Syntax

ANSI (Cross Platform)
int SendText(int64 lConnectionId, const char* lpszText);

Unicode (Windows)
INT SendText(LONG64 lConnectionId, LPCWSTR lpszText);

int secureblackbox_dtlsserver_sendtext(void* lpObj, int64 lConnectionId, const char* lpszText);

int SendText(qint64 lConnectionId, const QString& qsText);

Remarks

Use this method to send a text string to a connected client.

Error Handling (C++)

Start Method (DTLSServer Class)

Starts the DTLS server.

Syntax

ANSI (Cross Platform)
int Start();

Unicode (Windows)
INT Start();

int secureblackbox_dtlsserver_start(void* lpObj);

int Start();

Remarks

Use this method to start listening for incoming data.

Error Handling (C++)

Stop Method (DTLSServer Class)

Stops the DTLS server.

Syntax

ANSI (Cross Platform)
int Stop();

Unicode (Windows)
INT Stop();

int secureblackbox_dtlsserver_stop(void* lpObj);

int Stop();

Remarks

Call this method to stop listening for incoming data.

Error Handling (C++)

Accept Event (DTLSServer Class)

Reports an incoming connection.

Syntax

ANSI (Cross Platform)
virtual int FireAccept(DTLSServerAcceptEventParams *e);

typedef struct {
  const char *RemoteAddress;
  int RemotePort;
  int Accept;
  int reserved;
} DTLSServerAcceptEventParams;


Unicode (Windows)
virtual INT FireAccept(DTLSServerAcceptEventParams *e);

typedef struct {
  LPCWSTR RemoteAddress;
  INT RemotePort;
  BOOL Accept;
  INT reserved;
} DTLSServerAcceptEventParams;

#define EID_DTLSSERVER_ACCEPT 1

virtual INT SECUREBLACKBOX_CALL FireAccept(LPSTR &lpszRemoteAddress, INT &iRemotePort, BOOL &bAccept);

class DTLSServerAcceptEventParams {
public:
  const QString &RemoteAddress();

  int RemotePort();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Accept(DTLSServerAcceptEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireAccept(DTLSServerAcceptEventParams *e) {...}

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to Connect event to be notified of every connection that has been set up.

Connect Event (DTLSServer Class)

Reports a new 'connection'.

Syntax

ANSI (Cross Platform)
virtual int FireConnect(DTLSServerConnectEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *RemoteAddress;
  int RemotePort;
  int reserved;
} DTLSServerConnectEventParams;


Unicode (Windows)
virtual INT FireConnect(DTLSServerConnectEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR RemoteAddress;
  INT RemotePort;
  INT reserved;
} DTLSServerConnectEventParams;

#define EID_DTLSSERVER_CONNECT 2

virtual INT SECUREBLACKBOX_CALL FireConnect(LONG64 &lConnectionID, LPSTR &lpszRemoteAddress, INT &iRemotePort);

class DTLSServerConnectEventParams {
public:
  qint64 ConnectionID();

  const QString &RemoteAddress();

  int RemotePort();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Connect(DTLSServerConnectEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireConnect(DTLSServerConnectEventParams *e) {...}

Remarks

The class fires this event to report that a datagram from a new source has been received. When using DTLS, this may typically be thought of as a request for a new datagram-driven secure channel.

ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as TLSHandshake or Data.

Data Event (DTLSServer Class)

Supplies a data chunk received from a client.

Syntax

ANSI (Cross Platform)
virtual int FireData(DTLSServerDataEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *Buffer;
  int lenBuffer;
  int reserved;
} DTLSServerDataEventParams;


Unicode (Windows)
virtual INT FireData(DTLSServerDataEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCSTR Buffer;
  INT lenBuffer;
  INT reserved;
} DTLSServerDataEventParams;

#define EID_DTLSSERVER_DATA 3

virtual INT SECUREBLACKBOX_CALL FireData(LONG64 &lConnectionID, LPSTR &lpBuffer, INT &lenBuffer);

class DTLSServerDataEventParams {
public:
  qint64 ConnectionID();

  const QByteArray &Buffer();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Data(DTLSServerDataEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireData(DTLSServerDataEventParams *e) {...}

Remarks

This event is fired to supply another piece of data received from a client. This event may fire multiple times.

Disconnect Event (DTLSServer Class)

Fires to report a disconnected client.

Syntax

ANSI (Cross Platform)
virtual int FireDisconnect(DTLSServerDisconnectEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} DTLSServerDisconnectEventParams;


Unicode (Windows)
virtual INT FireDisconnect(DTLSServerDisconnectEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} DTLSServerDisconnectEventParams;

#define EID_DTLSSERVER_DISCONNECT 4

virtual INT SECUREBLACKBOX_CALL FireDisconnect(LONG64 &lConnectionID);

class DTLSServerDisconnectEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Disconnect(DTLSServerDisconnectEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireDisconnect(DTLSServerDisconnectEventParams *e) {...}

Remarks

The class fires this event when a virtual secure channel is closed.

Error Event (DTLSServer Class)

Information about errors during data delivery.

Syntax

ANSI (Cross Platform)
virtual int FireError(DTLSServerErrorEventParams *e);

typedef struct {
  int64 ConnectionID;
  int ErrorCode;
  int Fatal;
  int Remote;
  const char *Description;
  int reserved;
} DTLSServerErrorEventParams;


Unicode (Windows)
virtual INT FireError(DTLSServerErrorEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT ErrorCode;
  BOOL Fatal;
  BOOL Remote;
  LPCWSTR Description;
  INT reserved;
} DTLSServerErrorEventParams;

#define EID_DTLSSERVER_ERROR 5

virtual INT SECUREBLACKBOX_CALL FireError(LONG64 &lConnectionID, INT &iErrorCode, BOOL &bFatal, BOOL &bRemote, LPSTR &lpszDescription);

class DTLSServerErrorEventParams {
public:
  qint64 ConnectionID();

  int ErrorCode();

  bool Fatal();

  bool Remote();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Error(DTLSServerErrorEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireError(DTLSServerErrorEventParams *e) {...}

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

ExternalSign Event (DTLSServer Class)

Handles remote or external signing initiated by the server protocol.

Syntax

ANSI (Cross Platform)
virtual int FireExternalSign(DTLSServerExternalSignEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *OperationId;
  const char *HashAlgorithm;
  const char *Pars;
  const char *Data;
  char *SignedData;
  int reserved;
} DTLSServerExternalSignEventParams;


Unicode (Windows)
virtual INT FireExternalSign(DTLSServerExternalSignEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR OperationId;
  LPCWSTR HashAlgorithm;
  LPCWSTR Pars;
  LPCWSTR Data;
  LPWSTR SignedData;
  INT reserved;
} DTLSServerExternalSignEventParams;

#define EID_DTLSSERVER_EXTERNALSIGN 6

virtual INT SECUREBLACKBOX_CALL FireExternalSign(LONG64 &lConnectionID, LPSTR &lpszOperationId, LPSTR &lpszHashAlgorithm, LPSTR &lpszPars, LPSTR &lpszData, LPSTR &lpszSignedData);

class DTLSServerExternalSignEventParams {
public:
  qint64 ConnectionID();

  const QString &OperationId();

  const QString &HashAlgorithm();

  const QString &Pars();

  const QString &Data();

  const QString &SignedData();
  void SetSignedData(const QString &qsSignedData);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ExternalSign(DTLSServerExternalSignEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireExternalSign(DTLSServerExternalSignEventParams *e) {...}

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (DTLSServer Class)

This event notifies the application about an underlying control flow event.

Syntax

ANSI (Cross Platform)
virtual int FireNotification(DTLSServerNotificationEventParams *e);

typedef struct {
  const char *EventID;
  const char *EventParam;
  int reserved;
} DTLSServerNotificationEventParams;


Unicode (Windows)
virtual INT FireNotification(DTLSServerNotificationEventParams *e);

typedef struct {
  LPCWSTR EventID;
  LPCWSTR EventParam;
  INT reserved;
} DTLSServerNotificationEventParams;

#define EID_DTLSSERVER_NOTIFICATION 7

virtual INT SECUREBLACKBOX_CALL FireNotification(LPSTR &lpszEventID, LPSTR &lpszEventParam);

class DTLSServerNotificationEventParams {
public:
  const QString &EventID();

  const QString &EventParam();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Notification(DTLSServerNotificationEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireNotification(DTLSServerNotificationEventParams *e) {...}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


ListeningStarted	Notifies the application that the server has started listening for incoming connections.
ListeningStopped	Notifies the application that the server has stopped listening to incoming connections.

PlainData Event (DTLSServer Class)

Supplies a plain data chunk received from a client.

Syntax

ANSI (Cross Platform)
virtual int FirePlainData(DTLSServerPlainDataEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *Buffer;
  int lenBuffer;
  int reserved;
} DTLSServerPlainDataEventParams;


Unicode (Windows)
virtual INT FirePlainData(DTLSServerPlainDataEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCSTR Buffer;
  INT lenBuffer;
  INT reserved;
} DTLSServerPlainDataEventParams;

#define EID_DTLSSERVER_PLAINDATA 8

virtual INT SECUREBLACKBOX_CALL FirePlainData(LONG64 &lConnectionID, LPSTR &lpBuffer, INT &lenBuffer);

class DTLSServerPlainDataEventParams {
public:
  qint64 ConnectionID();

  const QByteArray &Buffer();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void PlainData(DTLSServerPlainDataEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FirePlainData(DTLSServerPlainDataEventParams *e) {...}

Remarks

This event is fired to supply another piece of plain data received from a client. This event may fire multiple times.

TLSCertValidate Event (DTLSServer Class)

Fires when a client certificate needs to be validated.

Syntax

ANSI (Cross Platform)
virtual int FireTLSCertValidate(DTLSServerTLSCertValidateEventParams *e);

typedef struct {
  int64 ConnectionID;
  int Accept;
  int reserved;
} DTLSServerTLSCertValidateEventParams;


Unicode (Windows)
virtual INT FireTLSCertValidate(DTLSServerTLSCertValidateEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  BOOL Accept;
  INT reserved;
} DTLSServerTLSCertValidateEventParams;

#define EID_DTLSSERVER_TLSCERTVALIDATE 9

virtual INT SECUREBLACKBOX_CALL FireTLSCertValidate(LONG64 &lConnectionID, BOOL &bAccept);

class DTLSServerTLSCertValidateEventParams {
public:
  qint64 ConnectionID();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSCertValidate(DTLSServerTLSCertValidateEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireTLSCertValidate(DTLSServerTLSCertValidateEventParams *e) {...}

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

TLSEstablished Event (DTLSServer Class)

Reports the setup of a TLS session.

Syntax

ANSI (Cross Platform)
virtual int FireTLSEstablished(DTLSServerTLSEstablishedEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} DTLSServerTLSEstablishedEventParams;


Unicode (Windows)
virtual INT FireTLSEstablished(DTLSServerTLSEstablishedEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} DTLSServerTLSEstablishedEventParams;

#define EID_DTLSSERVER_TLSESTABLISHED 10

virtual INT SECUREBLACKBOX_CALL FireTLSEstablished(LONG64 &lConnectionID);

class DTLSServerTLSEstablishedEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSEstablished(DTLSServerTLSEstablishedEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireTLSEstablished(DTLSServerTLSEstablishedEventParams *e) {...}

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

TLSHandshake Event (DTLSServer Class)

Fires when a newly established client connection initiates a TLS handshake.

Syntax

ANSI (Cross Platform)
virtual int FireTLSHandshake(DTLSServerTLSHandshakeEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *ServerName;
  int Abort;
  int reserved;
} DTLSServerTLSHandshakeEventParams;


Unicode (Windows)
virtual INT FireTLSHandshake(DTLSServerTLSHandshakeEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR ServerName;
  BOOL Abort;
  INT reserved;
} DTLSServerTLSHandshakeEventParams;

#define EID_DTLSSERVER_TLSHANDSHAKE 11

virtual INT SECUREBLACKBOX_CALL FireTLSHandshake(LONG64 &lConnectionID, LPSTR &lpszServerName, BOOL &bAbort);

class DTLSServerTLSHandshakeEventParams {
public:
  qint64 ConnectionID();

  const QString &ServerName();

  bool Abort();
  void SetAbort(bool bAbort);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSHandshake(DTLSServerTLSHandshakeEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireTLSHandshake(DTLSServerTLSHandshakeEventParams *e) {...}

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

TLSPSK Event (DTLSServer Class)

Requests a pre-shared key for TLS-PSK.

Syntax

ANSI (Cross Platform)
virtual int FireTLSPSK(DTLSServerTLSPSKEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *Identity;
  char *PSK;
  char *Ciphersuite;
  int reserved;
} DTLSServerTLSPSKEventParams;


Unicode (Windows)
virtual INT FireTLSPSK(DTLSServerTLSPSKEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR Identity;
  LPWSTR PSK;
  LPWSTR Ciphersuite;
  INT reserved;
} DTLSServerTLSPSKEventParams;

#define EID_DTLSSERVER_TLSPSK 12

virtual INT SECUREBLACKBOX_CALL FireTLSPSK(LONG64 &lConnectionID, LPSTR &lpszIdentity, LPSTR &lpszPSK, LPSTR &lpszCiphersuite);

class DTLSServerTLSPSKEventParams {
public:
  qint64 ConnectionID();

  const QString &Identity();

  const QString &PSK();
  void SetPSK(const QString &qsPSK);

  const QString &Ciphersuite();
  void SetCiphersuite(const QString &qsCiphersuite);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSPSK(DTLSServerTLSPSKEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireTLSPSK(DTLSServerTLSPSKEventParams *e) {...}

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

TLSShutdown Event (DTLSServer Class)

Reports closure of a TLS session.

Syntax

ANSI (Cross Platform)
virtual int FireTLSShutdown(DTLSServerTLSShutdownEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} DTLSServerTLSShutdownEventParams;


Unicode (Windows)
virtual INT FireTLSShutdown(DTLSServerTLSShutdownEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} DTLSServerTLSShutdownEventParams;

#define EID_DTLSSERVER_TLSSHUTDOWN 13

virtual INT SECUREBLACKBOX_CALL FireTLSShutdown(LONG64 &lConnectionID);

class DTLSServerTLSShutdownEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSShutdown(DTLSServerTLSShutdownEventParams *e);

// Or, subclass DTLSServer and override this emitter function.
virtual int FireTLSShutdown(DTLSServerTLSShutdownEventParams *e) {...}

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a Disconnect, which marks the closure of the underlying TCP session.

Certificate Type

Encapsulates an individual X.509 certificate.

Syntax

SecureBlackboxCertificate (declared in secureblackbox.h)

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

Bytes
char* (read-only)
Default Value:

Returns the raw certificate data in DER format.

CA
int
Default Value: FALSE

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this field when generating a new certificate to have its Basic Constraints extension generated automatically.

CAKeyID
char* (read-only)
Default Value:

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the SubjectKeyID setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

CertType
int (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

CRLDistributionPoints
char*
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this field when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

Curve
char*
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

Fingerprint
char* (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

FriendlyName
char* (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

Handle
int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

HashAlgorithm
char*
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use SigAlgorithm to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Issuer
char* (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via IssuerRDN.

IssuerRDN
char*
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

KeyAlgorithm
char*
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the KeyBits, Curve, and PublicKeyBytes fields to get more details about the key the certificate contains.

KeyBits
int (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the PublicKeyBytes or PrivateKeyBytes field would typically contain auxiliary values, and therefore be longer.

KeyFingerprint
char* (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the Fingerprint field. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

KeyUsage
int
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this field before generating the certificate to propagate the key usage flags to the new certificate.

KeyValid
int (read-only)
Default Value: FALSE

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
char*
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this field before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

OCSPNoCheck
int
Default Value: FALSE

Accessor to the value of the certificate's ocsp-no-check extension.

Origin
int (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

PolicyIDs
char*
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this field when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

PrivateKeyBytes
char* (read-only)
Default Value:

Returns the certificate's private key in DER-encoded format. It is normal for this field to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

PrivateKeyExists
int (read-only)
Default Value: FALSE

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This field is independent from PrivateKeyBytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

PrivateKeyExtractable
int (read-only)
Default Value: FALSE

Indicates whether the private key is extractable (exportable).

PublicKeyBytes
char* (read-only)
Default Value:

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

Qualified
int (read-only)
Default Value: FALSE

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

QualifiedStatements
int
Default Value: 0

Returns a simplified qualified status of the certificate.

Qualifiers
char* (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

SelfSigned
int (read-only)
Default Value: FALSE

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
char*
Default Value:

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

SigAlgorithm
char* (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

Source
int (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Subject
char* (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via SubjectRDN.

SubjectAlternativeName
char*
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main SubjectRDN field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

SubjectKeyID
char*
Default Value:

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The SubjectKeyID and CAKeyID fields of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

SubjectRDN
char*
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

Valid
int (read-only)
Default Value: FALSE

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

ValidFrom
char*
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

ValidTo
char*
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

Certificate()

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Syntax

SecureBlackboxExternalCrypto (declared in secureblackbox.h)

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

AsyncDocumentID

CustomParams

Data

ExternalHashCalculation

Fields

AsyncDocumentID
char*
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CustomParams
char*
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

Data
char*
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

ExternalHashCalculation
int
Default Value: FALSE

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

HashAlgorithm
char*
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

KeyID
char*
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

KeySecret
char*
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the KeyID topic.

Method
int
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

Mode
int
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

PublicKeyAlgorithm
char*
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

ExternalCrypto()

Creates a new ExternalCrypto object with default field values.

SocketSettings Type

A container for the socket settings.

Syntax

SecureBlackboxSocketSettings (declared in secureblackbox.h)

Remarks

This type is a container for socket-layer parameters.

The following fields are available:

Fields

DNSMode
int
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

DNSPort
int
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
int
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

DNSServers
char*
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
int
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

IncomingSpeedLimit
int
Default Value: 0

The maximum number of bytes to read from the socket, per second.

LocalAddress
char*
Default Value: ""

The local network interface to bind the socket to.

LocalPort
int
Default Value: 0

The local port number to bind the socket to.

OutgoingSpeedLimit
int
Default Value: 0

The maximum number of bytes to write to the socket, per second.

Timeout
int
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
int
Default Value: FALSE

Enables or disables IP protocol version 6.

Constructors

SocketSettings()

Creates a new SocketSettings object.

TLSConnectionInfo Type

Contains information about a network connection.

Syntax

SecureBlackboxTLSConnectionInfo (declared in secureblackbox.h)

Remarks

Use this property to check various details of the network connection. These include the total amounts of data transferred, the availability of TLS, and its parameters.

The following fields are available:

Fields

AEADCipher
int (read-only)
Default Value: FALSE

Indicates whether the encryption algorithm used is an AEAD cipher.

ChainValidationDetails
int (read-only)
Default Value: 0

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationResult
int (read-only)
Default Value: 0

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

Ciphersuite
char* (read-only)
Default Value: ""

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

ClientAuthenticated
int (read-only)
Default Value: FALSE

Specifies whether client authentication was performed during this connection.

ClientAuthRequested
int (read-only)
Default Value: FALSE

Specifies whether client authentication was requested during this connection.

ConnectionEstablished
int (read-only)
Default Value: FALSE

Indicates whether the connection has been established fully.

ConnectionID
char* (read-only)
Default Value:

The unique identifier assigned to this connection.

DigestAlgorithm
char* (read-only)
Default Value: ""

The digest algorithm used in a TLS-enabled connection.

EncryptionAlgorithm
char* (read-only)
Default Value: ""

The symmetric encryption algorithm used in a TLS-enabled connection.

Exportable
int (read-only)
Default Value: FALSE

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

ID
int64 (read-only)
Default Value: -1

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

KeyExchangeAlgorithm
char* (read-only)
Default Value: ""

The key exchange algorithm used in a TLS-enabled connection.

KeyExchangeKeyBits
int (read-only)
Default Value: 0

The length of the key exchange key of a TLS-enabled connection.

NamedECCurve
char* (read-only)
Default Value: ""

The elliptic curve used in this connection.

PFSCipher
int (read-only)
Default Value: FALSE

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

PreSharedIdentity
char*
Default Value: ""

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedIdentityHint
char* (read-only)
Default Value: ""

A hint professed by the server to help the client select the PSK identity to use.

PublicKeyBits
int (read-only)
Default Value: 0

The length of the public key.

RemoteAddress
char* (read-only)
Default Value: ""

The client's IP address.

RemotePort
int (read-only)
Default Value: 0

The remote port of the client connection.

ResumedSession
int (read-only)
Default Value: FALSE

Indicates whether a TLS-enabled connection was spawned from another TLS connection

SecureConnection
int (read-only)
Default Value: FALSE

Indicates whether TLS or SSL is enabled for this connection.

ServerAuthenticated
int (read-only)
Default Value: FALSE

Indicates whether server authentication was performed during a TLS-enabled connection.

SignatureAlgorithm
char* (read-only)
Default Value: ""

The signature algorithm used in a TLS handshake.

SymmetricBlockSize
int (read-only)
Default Value: 0

The block size of the symmetric algorithm used.

SymmetricKeyBits
int (read-only)
Default Value: 0

The key length of the symmetric algorithm used.

TotalBytesReceived
int64 (read-only)
Default Value: 0

The total number of bytes received over this connection.

TotalBytesSent
int64 (read-only)
Default Value: 0

The total number of bytes sent over this connection.

ValidationLog
char* (read-only)
Default Value: ""

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

Version
char* (read-only)
Default Value: ""

Indicates the version of SSL/TLS protocol negotiated during this connection.

Constructors

TLSConnectionInfo()

Creates a new TLSConnectionInfo object.

TLSSettings Type

A container for TLS connection settings.

Syntax

SecureBlackboxTLSSettings (declared in secureblackbox.h)

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

The following fields are available:

AutoValidateCertificates

ForceResumeIfDestinationChanges

PreSharedIdentity

PreSharedKey

PreSharedKeyCiphersuite

RenegotiationAttackPreventionMode

RevocationCheck

SSLOptions

TLSMode

UseExtendedMasterSecret

UseSessionResumption

Versions

Fields

AutoValidateCertificates
int
Default Value: TRUE

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

BaseConfiguration
int
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Ciphersuites
char*
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

ClientAuth
int
Default Value: 0

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

ECCurves
char*
Default Value: ""

Defines the elliptic curves to enable.

Extensions
char*
Default Value: ""

Provides access to TLS extensions.

ForceResumeIfDestinationChanges
int
Default Value: FALSE

Whether to force TLS session resumption when the destination address changes.

PreSharedIdentity
char*
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedKey
char*
Default Value: ""

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

PreSharedKeyCiphersuite
char*
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

RenegotiationAttackPreventionMode
int
Default Value: 2

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

RevocationCheck
int
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

SSLOptions
int
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

TLSMode
int
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

UseExtendedMasterSecret
int
Default Value: FALSE

Enables the Extended Master Secret Extension, as defined in RFC 7627.

UseSessionResumption
int
Default Value: FALSE

Enables or disables the TLS session resumption capability.

Versions
int
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

TLSSettings()

Creates a new TLSSettings object.

SecureBlackboxList Type

Syntax

SecureBlackboxList<T> (declared in secureblackbox.h)

Remarks

SecureBlackboxList is a generic class that is used to hold a collection of objects of type T, where T is one of the custom types supported by the DTLSServer class.

Methods

GetCount	This method returns the current size of the collection. int GetCount() {}
SetCount	This method sets the size of the collection. This method returns `0` if setting the size was successful; or `-1` if the collection is `ReadOnly`. When adding additional objects to a collection call this method to specify the new size. Increasing the size of the collection preserves existing objects in the collection. int SetCount(int count) {}
Get	This method gets the item at the specified position. The `index` parameter specifies the index of the item in the collection. This method returns `NULL` if an invalid `index` is specified. T* Get(int index) {}
Set	This method sets the item at the specified position. The `index` parameter specifies the index of the item in the collection that is being set. This method returns `-1` if an invalid `index` is specified. Note: Objects created using the `new` operator must be freed using the `delete` operator; they will not be automatically freed by the class. T* Set(int index, T* value) {}

Config Settings (DTLSServer Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

DTLSServer Config Settings

BoundAddress: Returns the bound address of the listening socket.

Use this property to obtain the bound address of the listening socket.

BoundPort: The port that was bound by the server.

Returns the port number that was bound by the server.

ClientAuth: Enables or disables certificate-based client authentication.

Set this property to one of the below values to tune up the client authentication logic:


0		No client authentication (the default setting)
1		Request certificates. The server will ask connecting clients for their certificates. Non-authenticated client connections will be accepted anyway.
2		Require certificates. The server will ask connecting clients for their certificates. If a client fails to provide a certificate, the server will terminate the connection.

If this property is set to 1 or 2, the component will request certificates from the connecting clients. Depending on the setting, the clients that fail to provide their certificate in response will be allowed or disallowed to proceed with the connection. The server signals about a received certificate by firing its CertificateValidate event. Use PinClient method in the event handler to pin the client details, and access the provided certificate chain via the PinnedClientChain property.

Note that this event is fired from the connecting clients threads, so please make sure you avoid bottlenecks in the event handler and put appropriate thread safety measures in place.

Unlike the client-side components, the server component does not perform automated certificate validation against the local security policy. You must perform appropriate certificate validation steps in your CertificateValidate event handler.

DatagramSize: Specifies maximum size of the datagram.

Use this property to get or set maximum size of the datagram. Data pieces larger than DatagramSize will be split into several smaller datagrams with lengths smaller (or equal) to the DatagramSize.

DualStack: Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

MaxDataSize: Specifies maximum size of the packet which will not be divided into smaller ones.

Use this read-only property to get the maximum size of the data piece which will not be divided into smaller ones. The value of this property is smaller or equal to the DatagramSize.

PreSharedIdentityHint: Gets or sets the PSK identity hint.

Use this property to get or set the PSK identity hint to be used during PSK-based TLS handshake.

RetransmissionInterval: Specifies value of the retransmission interval.

Use this property to specify the period of time in milliseconds, after which the client will repeat sending. Set this property to 0 to disable the retransmission timer. Defaul value is 1000 (i.e. 1 second).

SocketHandle: Returns the socket handle of the connected component.

Read this config property to get the socket handle of the active socket. In servers, either pin the specific client connection before checking this property, or pass the connection ID as an index (SocketHandle[connId]).

SocketHandle[i]: Returns the internal socket handle.

Use this property to read the socket handle of the connection number i.

SplitLongData: Specifies whether to split long datagrams into smaller ones.

If this prperty is set to True, datagrams larger than MaxDataSize will be split into smaller ones. Default value is True.

SrtpMasterKeyLen: The SRTP master key length.

Gets or sets the length, in bytes, of the SRTP master key. The default value is 16.

SrtpMasterSaltLen: The SRTP master salt length.

Gets or sets the length of the SRTP master salt, in bytes. The default setting is 14.

TLSExtensions: TBD.

TBD

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

PKICache: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.

The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached.

Supported Values:


certificate	Enables caching of certificates.
crl	Enables caching of Certificate Revocation Lists (CRLs).
ocsp	Enables caching of OCSP (Online Certificate Status Protocol) responses.

Example (default value): PKICache=certificate,crl,ocsp In this example, the component caches certificates, CRLs, and OCSP responses.

PKICachePath: Specifies the file system path where cached PKI data is stored.

The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts.

The default value is an empty string - no cached PKI data is stored on disk.

Example: PKICachePath=C:\Temp\cache In this example, the cached PKI data is stored in the C:\Temp\cache directory.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseCRLObjectCaching: Specifies whether reuse of loaded CRL objects is enabled.

This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used.

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOCSPResponseObjectCaching: Specifies whether reuse of loaded OCSP response objects is enabled.

This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used.

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

XMLRDNDescriptorName[OID]: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.

This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures.

The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing.

Syntax: Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2");

Where:

OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map.

PrimaryName: The main descriptor name used in the XML signature when the OID is encountered.

Alias1, Alias2, ...: Optional alternative names recognized during parsing.

Usage Examples:

Map OID 2.5.4.5 to SERIALNUMBER: Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER");

Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS: Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS");

XMLRDNDescriptorPriority[OID]: Specifies the priority of descriptor names associated with a specific OID.

This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing.

XMLRDNDescriptorReverseOrder: Specifies whether to reverse the order of descriptors in RDN.

Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1).

XMLRDNDescriptorSeparator: Specifies the separator used between descriptors in RDN.

Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value.

Trappable Errors (DTLSServer Class)

Error Handling (C++)

Call the GetLastErrorCode() method to obtain the last called method's result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. Known error codes are listed below. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

DTLSServer Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)