TSPServer Class

Properties Methods Events Config Settings Errors

The TSPServer class supports server-side functionality of the timestamping protocol.

Syntax

TSPServer

Remarks

Use this control to serve timestamping requests from your application.

Property List

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.


Accuracy	The accuracy of the server time, in microseconds.
Active	Indicates whether the server is active and is listening to new connections.
AuthRealm	Specifies authentication realm for digest and NTLM authentication.
AuthTypes	Defines allowed HTTP authentication types.
BoundPort	Indicates the bound listening port.
DefaultPolicy	Specifies the default TSA policy.
Endpoint	Specifies the resource address of the TSA endpoint.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
Host	The host to bind the listening port to.
PinnedClient	Populates the pinned client details.
PinnedClientChain	Contains the certificate chain of the pinned client.
Port	Specifies the port number to listen for connections on.
PortRangeFrom	Specifies the lower limit of the listening port range for incoming connections.
PortRangeTo	Specifies the upper limit of the listening port range for incoming connections.
SessionTimeout	Specifies the default session timeout value in milliseconds.
SigningCertificate	The certificate to be used for signing.
SigningChain	The signing certificate chain.
SocketSettings	Manages network connection settings.
TLSServerChain	The server's TLS certificates.
TLSSettings	Manages TLS layer settings.
TSAName	Specifies the name of TSA.
Users	Provides a list of registered users.
WebsiteName	Specifies the web site name to use in the certificate.

Method List

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.


Config	This method sets or retrieves a configuration setting.
DoAction	Performs an additional action.
DropClient	Terminates a client connection.
GetRequestBytes	Returns the contents of the client's HTTP request.
GetRequestHeader	Returns a request header value.
GetRequestString	Returns the contents of the client's HTTP request.
GetRequestUsername	Returns the username for a connection.
ListClients	Enumerates the connected clients.
PinClient	Takes a snapshot of the connection's properties.
ProcessGenericRequest	Processes a generic timestamp request.
Reset	Resets the class settings.
Start	Starts the TSP server.
Stop	Stops the TSP server.
Timestamp	Creates a timestamp from the message imprint.

Event List

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.


Accept	Reports an incoming connection.
AuthAttempt	Fires when a connected client makes an authentication attempt.
Connect	Reports an accepted connection.
Disconnect	Fires to report a disconnected client.
Error	Information about errors during data delivery.
ExternalSign	Handles remote or external signing initiated by the server protocol.
Notification	This event notifies the application about an underlying control flow event.
TimestampRequest	Reports an incoming timestamp request.
TLSCertValidate	Fires when a client certificate needs to be validated.
TLSEstablished	Reports the setup of a TLS session.
TLSHandshake	Fires when a newly established client connection initiates a TLS handshake.
TLSPSK	Requests a pre-shared key for TLS-PSK.
TLSShutdown	Reports closure of a TLS session.

Config Settings

The following is a list of config settings for the class with short descriptions. Click on the links for further details.


AllowOptionsResponseWithoutAuth	Enables unauthenticated responses to OPTIONS requests.
AuthDigestExpire	Specifies digest expiration time for digest authentication.
ClientAuth	Enables or disables certificate-based client authentication.
DualStack	Allows the use of ip4 and ip6 simultaneously.
HomePage	Specifies the home page resource name.
Host	The host to bind to.
RequestFilter	The request string modifier.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
WebsiteName	The website name for the TLS certificate.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the class.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseOwnDNSResolver	Specifies whether the client classes should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

Accuracy Property (TSPServer Class)

The accuracy of the server time, in microseconds.

Syntax

ANSI (Cross Platform)
int64 GetAccuracy();
int SetAccuracy(int64 lAccuracy);

Unicode (Windows)
LONG64 GetAccuracy();
INT SetAccuracy(LONG64 lAccuracy);

int64 secureblackbox_tspserver_getaccuracy(void* lpObj);
int secureblackbox_tspserver_setaccuracy(void* lpObj, int64 lAccuracy);

qint64 GetAccuracy();
int SetAccuracy(qint64 lAccuracy);

Default Value

Remarks

Use this property to provide the accuracy of the time returned by the server, in microseconds. This specifies the maximum deviation of the returned time from the actual server time.

Data Type

Long64

Active Property (TSPServer Class)

Indicates whether the server is active and is listening to new connections.

Syntax

ANSI (Cross Platform)
int GetActive();

Unicode (Windows)
BOOL GetActive();

int secureblackbox_tspserver_getactive(void* lpObj);

bool GetActive();

Default Value

FALSE

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only and not available at design time.

Data Type

Boolean

AuthRealm Property (TSPServer Class)

Specifies authentication realm for digest and NTLM authentication.

Syntax

ANSI (Cross Platform)
char* GetAuthRealm();
int SetAuthRealm(const char* lpszAuthRealm);

Unicode (Windows)
LPWSTR GetAuthRealm();
INT SetAuthRealm(LPCWSTR lpszAuthRealm);

char* secureblackbox_tspserver_getauthrealm(void* lpObj);
int secureblackbox_tspserver_setauthrealm(void* lpObj, const char* lpszAuthRealm);

QString GetAuthRealm();
int SetAuthRealm(QString qsAuthRealm);

Default Value

"SecureBlackbox"

Remarks

Specifies authentication realm for digest and NTLM authentication types.

Data Type

String

AuthTypes Property (TSPServer Class)

Defines allowed HTTP authentication types.

Syntax

ANSI (Cross Platform)
int GetAuthTypes();
int SetAuthTypes(int iAuthTypes);

Unicode (Windows)
INT GetAuthTypes();
INT SetAuthTypes(INT iAuthTypes);

int secureblackbox_tspserver_getauthtypes(void* lpObj);
int secureblackbox_tspserver_setauthtypes(void* lpObj, int iAuthTypes);

int GetAuthTypes();
int SetAuthTypes(int iAuthTypes);

Default Value

Remarks

Use this property to define which authentication types the component should support or attempt to use by enabling the relevant bitmask flags:


haBasic	`0x01`	Basic authentication
haDigest	`0x02`	Digest authentication (RFC 2617)
haNTLM	`0x04`	Windows NTLM authentication
haKerberos	`0x08`	Kerberos (Negotiate) authentication
haOAuth2	`0x10`	OAuth2 authentication

Data Type

Integer

BoundPort Property (TSPServer Class)

Indicates the bound listening port.

Syntax

ANSI (Cross Platform)
int GetBoundPort();

Unicode (Windows)
INT GetBoundPort();

int secureblackbox_tspserver_getboundport(void* lpObj);

int GetBoundPort();

Default Value

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals Port if it is provided, or is allocated dynamically if configured to fall in the range between PortRangeFrom and PortRangeTo constraints.

This property is read-only and not available at design time.

Data Type

Integer

DefaultPolicy Property (TSPServer Class)

Specifies the default TSA policy.

Syntax

ANSI (Cross Platform)
char* GetDefaultPolicy();
int SetDefaultPolicy(const char* lpszDefaultPolicy);

Unicode (Windows)
LPWSTR GetDefaultPolicy();
INT SetDefaultPolicy(LPCWSTR lpszDefaultPolicy);

char* secureblackbox_tspserver_getdefaultpolicy(void* lpObj);
int secureblackbox_tspserver_setdefaultpolicy(void* lpObj, const char* lpszDefaultPolicy);

QString GetDefaultPolicy();
int SetDefaultPolicy(QString qsDefaultPolicy);

Default Value

Remarks

Use this property to specify the default TSA policy.

Data Type

String

Endpoint Property (TSPServer Class)

Specifies the resource address of the TSA endpoint.

Syntax

ANSI (Cross Platform)
char* GetEndpoint();
int SetEndpoint(const char* lpszEndpoint);

Unicode (Windows)
LPWSTR GetEndpoint();
INT SetEndpoint(LPCWSTR lpszEndpoint);

char* secureblackbox_tspserver_getendpoint(void* lpObj);
int secureblackbox_tspserver_setendpoint(void* lpObj, const char* lpszEndpoint);

QString GetEndpoint();
int SetEndpoint(QString qsEndpoint);

Default Value

"/"

Remarks

Use this property to specify the endpoint of which the TSA service should be responding.

Data Type

String

ExternalCrypto Property (TSPServer Class)

Provides access to external signing and DC parameters.

Syntax

SecureBlackboxExternalCrypto* GetExternalCrypto();

char* secureblackbox_tspserver_getexternalcryptoasyncdocumentid(void* lpObj);
int secureblackbox_tspserver_setexternalcryptoasyncdocumentid(void* lpObj, const char* lpszExternalCryptoAsyncDocumentID);

char* secureblackbox_tspserver_getexternalcryptocustomparams(void* lpObj);
int secureblackbox_tspserver_setexternalcryptocustomparams(void* lpObj, const char* lpszExternalCryptoCustomParams);

char* secureblackbox_tspserver_getexternalcryptodata(void* lpObj);
int secureblackbox_tspserver_setexternalcryptodata(void* lpObj, const char* lpszExternalCryptoData);

int secureblackbox_tspserver_getexternalcryptoexternalhashcalculation(void* lpObj);
int secureblackbox_tspserver_setexternalcryptoexternalhashcalculation(void* lpObj, int bExternalCryptoExternalHashCalculation);

char* secureblackbox_tspserver_getexternalcryptohashalgorithm(void* lpObj);
int secureblackbox_tspserver_setexternalcryptohashalgorithm(void* lpObj, const char* lpszExternalCryptoHashAlgorithm);

char* secureblackbox_tspserver_getexternalcryptokeyid(void* lpObj);
int secureblackbox_tspserver_setexternalcryptokeyid(void* lpObj, const char* lpszExternalCryptoKeyID);

char* secureblackbox_tspserver_getexternalcryptokeysecret(void* lpObj);
int secureblackbox_tspserver_setexternalcryptokeysecret(void* lpObj, const char* lpszExternalCryptoKeySecret);

int secureblackbox_tspserver_getexternalcryptomethod(void* lpObj);
int secureblackbox_tspserver_setexternalcryptomethod(void* lpObj, int iExternalCryptoMethod);

int secureblackbox_tspserver_getexternalcryptomode(void* lpObj);
int secureblackbox_tspserver_setexternalcryptomode(void* lpObj, int iExternalCryptoMode);

char* secureblackbox_tspserver_getexternalcryptopublickeyalgorithm(void* lpObj);
int secureblackbox_tspserver_setexternalcryptopublickeyalgorithm(void* lpObj, const char* lpszExternalCryptoPublicKeyAlgorithm);

QString GetExternalCryptoAsyncDocumentID();
int SetExternalCryptoAsyncDocumentID(QString qsExternalCryptoAsyncDocumentID);

QString GetExternalCryptoCustomParams();
int SetExternalCryptoCustomParams(QString qsExternalCryptoCustomParams);

QString GetExternalCryptoData();
int SetExternalCryptoData(QString qsExternalCryptoData);

bool GetExternalCryptoExternalHashCalculation();
int SetExternalCryptoExternalHashCalculation(bool bExternalCryptoExternalHashCalculation);

QString GetExternalCryptoHashAlgorithm();
int SetExternalCryptoHashAlgorithm(QString qsExternalCryptoHashAlgorithm);

QString GetExternalCryptoKeyID();
int SetExternalCryptoKeyID(QString qsExternalCryptoKeyID);

QString GetExternalCryptoKeySecret();
int SetExternalCryptoKeySecret(QString qsExternalCryptoKeySecret);

int GetExternalCryptoMethod();
int SetExternalCryptoMethod(int iExternalCryptoMethod);

int GetExternalCryptoMode();
int SetExternalCryptoMode(int iExternalCryptoMode);

QString GetExternalCryptoPublicKeyAlgorithm();
int SetExternalCryptoPublicKeyAlgorithm(QString qsExternalCryptoPublicKeyAlgorithm);

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

This property is read-only.

Data Type

SecureBlackboxExternalCrypto

FIPSMode Property (TSPServer Class)

Reserved.

Syntax

ANSI (Cross Platform)
int GetFIPSMode();
int SetFIPSMode(int bFIPSMode);

Unicode (Windows)
BOOL GetFIPSMode();
INT SetFIPSMode(BOOL bFIPSMode);

int secureblackbox_tspserver_getfipsmode(void* lpObj);
int secureblackbox_tspserver_setfipsmode(void* lpObj, int bFIPSMode);

bool GetFIPSMode();
int SetFIPSMode(bool bFIPSMode);

Default Value

FALSE

Remarks

This property is reserved for future use.

Data Type

Boolean

Host Property (TSPServer Class)

The host to bind the listening port to.

Syntax

ANSI (Cross Platform)
char* GetHost();
int SetHost(const char* lpszHost);

Unicode (Windows)
LPWSTR GetHost();
INT SetHost(LPCWSTR lpszHost);

char* secureblackbox_tspserver_gethost(void* lpObj);
int secureblackbox_tspserver_sethost(void* lpObj, const char* lpszHost);

QString GetHost();
int SetHost(QString qsHost);

Default Value

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

Data Type

String

PinnedClient Property (TSPServer Class)

Populates the pinned client details.

Syntax

SecureBlackboxTLSConnectionInfo* GetPinnedClient();

int secureblackbox_tspserver_getpinnedclientaeadcipher(void* lpObj);

int secureblackbox_tspserver_getpinnedclientchainvalidationdetails(void* lpObj);

int secureblackbox_tspserver_getpinnedclientchainvalidationresult(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientciphersuite(void* lpObj);

int secureblackbox_tspserver_getpinnedclientclientauthenticated(void* lpObj);

int secureblackbox_tspserver_getpinnedclientclientauthrequested(void* lpObj);

int secureblackbox_tspserver_getpinnedclientconnectionestablished(void* lpObj);

int secureblackbox_tspserver_getpinnedclientconnectionid(void* lpObj, char** lpPinnedClientConnectionID, int* lenPinnedClientConnectionID);

char* secureblackbox_tspserver_getpinnedclientdigestalgorithm(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientencryptionalgorithm(void* lpObj);

int secureblackbox_tspserver_getpinnedclientexportable(void* lpObj);

int64 secureblackbox_tspserver_getpinnedclientid(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientkeyexchangealgorithm(void* lpObj);

int secureblackbox_tspserver_getpinnedclientkeyexchangekeybits(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientnamedeccurve(void* lpObj);

int secureblackbox_tspserver_getpinnedclientpfscipher(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientpresharedidentity(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientpresharedidentityhint(void* lpObj);

int secureblackbox_tspserver_getpinnedclientpublickeybits(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientremoteaddress(void* lpObj);

int secureblackbox_tspserver_getpinnedclientremoteport(void* lpObj);

int secureblackbox_tspserver_getpinnedclientresumedsession(void* lpObj);

int secureblackbox_tspserver_getpinnedclientsecureconnection(void* lpObj);

int secureblackbox_tspserver_getpinnedclientserverauthenticated(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientsignaturealgorithm(void* lpObj);

int secureblackbox_tspserver_getpinnedclientsymmetricblocksize(void* lpObj);

int secureblackbox_tspserver_getpinnedclientsymmetrickeybits(void* lpObj);

int64 secureblackbox_tspserver_getpinnedclienttotalbytesreceived(void* lpObj);

int64 secureblackbox_tspserver_getpinnedclienttotalbytessent(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientvalidationlog(void* lpObj);

char* secureblackbox_tspserver_getpinnedclientversion(void* lpObj);

bool GetPinnedClientAEADCipher();

int GetPinnedClientChainValidationDetails();

int GetPinnedClientChainValidationResult();

QString GetPinnedClientCiphersuite();

bool GetPinnedClientClientAuthenticated();

bool GetPinnedClientClientAuthRequested();

bool GetPinnedClientConnectionEstablished();

QByteArray GetPinnedClientConnectionID();

QString GetPinnedClientDigestAlgorithm();

QString GetPinnedClientEncryptionAlgorithm();

bool GetPinnedClientExportable();

qint64 GetPinnedClientID();

QString GetPinnedClientKeyExchangeAlgorithm();

int GetPinnedClientKeyExchangeKeyBits();

QString GetPinnedClientNamedECCurve();

bool GetPinnedClientPFSCipher();

QString GetPinnedClientPreSharedIdentity();

QString GetPinnedClientPreSharedIdentityHint();

int GetPinnedClientPublicKeyBits();

QString GetPinnedClientRemoteAddress();

int GetPinnedClientRemotePort();

bool GetPinnedClientResumedSession();

bool GetPinnedClientSecureConnection();

bool GetPinnedClientServerAuthenticated();

QString GetPinnedClientSignatureAlgorithm();

int GetPinnedClientSymmetricBlockSize();

int GetPinnedClientSymmetricKeyBits();

qint64 GetPinnedClientTotalBytesReceived();

qint64 GetPinnedClientTotalBytesSent();

QString GetPinnedClientValidationLog();

QString GetPinnedClientVersion();

Remarks

Use this property to access the details of the client connection previously pinned with PinClient method.

This property is read-only and not available at design time.

Data Type

SecureBlackboxTLSConnectionInfo

PinnedClientChain Property (TSPServer Class)

Contains the certificate chain of the pinned client.

Syntax

SecureBlackboxList<SecureBlackboxCertificate>* GetPinnedClientChain();

int secureblackbox_tspserver_getpinnedclientcertcount(void* lpObj);

int secureblackbox_tspserver_getpinnedclientcertbytes(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertBytes, int* lenPinnedClientCertBytes);

int secureblackbox_tspserver_getpinnedclientcertcakeyid(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertCAKeyID, int* lenPinnedClientCertCAKeyID);

char* secureblackbox_tspserver_getpinnedclientcertfingerprint(void* lpObj, int pinnedclientcertindex);

int64 secureblackbox_tspserver_getpinnedclientcerthandle(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertissuer(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertissuerrdn(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertkeyalgorithm(void* lpObj, int pinnedclientcertindex);

int secureblackbox_tspserver_getpinnedclientcertkeybits(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertkeyfingerprint(void* lpObj, int pinnedclientcertindex);

int secureblackbox_tspserver_getpinnedclientcertkeyusage(void* lpObj, int pinnedclientcertindex);

int secureblackbox_tspserver_getpinnedclientcertpublickeybytes(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertPublicKeyBytes, int* lenPinnedClientCertPublicKeyBytes);

int secureblackbox_tspserver_getpinnedclientcertselfsigned(void* lpObj, int pinnedclientcertindex);

int secureblackbox_tspserver_getpinnedclientcertserialnumber(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertSerialNumber, int* lenPinnedClientCertSerialNumber);

char* secureblackbox_tspserver_getpinnedclientcertsigalgorithm(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertsubject(void* lpObj, int pinnedclientcertindex);

int secureblackbox_tspserver_getpinnedclientcertsubjectkeyid(void* lpObj, int pinnedclientcertindex, char** lpPinnedClientCertSubjectKeyID, int* lenPinnedClientCertSubjectKeyID);

char* secureblackbox_tspserver_getpinnedclientcertsubjectrdn(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertvalidfrom(void* lpObj, int pinnedclientcertindex);

char* secureblackbox_tspserver_getpinnedclientcertvalidto(void* lpObj, int pinnedclientcertindex);

int GetPinnedClientCertCount();

QByteArray GetPinnedClientCertBytes(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertCAKeyID(int iPinnedClientCertIndex);

QString GetPinnedClientCertFingerprint(int iPinnedClientCertIndex);

qint64 GetPinnedClientCertHandle(int iPinnedClientCertIndex);

QString GetPinnedClientCertIssuer(int iPinnedClientCertIndex);

QString GetPinnedClientCertIssuerRDN(int iPinnedClientCertIndex);

QString GetPinnedClientCertKeyAlgorithm(int iPinnedClientCertIndex);

int GetPinnedClientCertKeyBits(int iPinnedClientCertIndex);

QString GetPinnedClientCertKeyFingerprint(int iPinnedClientCertIndex);

int GetPinnedClientCertKeyUsage(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertPublicKeyBytes(int iPinnedClientCertIndex);

bool GetPinnedClientCertSelfSigned(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertSerialNumber(int iPinnedClientCertIndex);

QString GetPinnedClientCertSigAlgorithm(int iPinnedClientCertIndex);

QString GetPinnedClientCertSubject(int iPinnedClientCertIndex);

QByteArray GetPinnedClientCertSubjectKeyID(int iPinnedClientCertIndex);

QString GetPinnedClientCertSubjectRDN(int iPinnedClientCertIndex);

QString GetPinnedClientCertValidFrom(int iPinnedClientCertIndex);

QString GetPinnedClientCertValidTo(int iPinnedClientCertIndex);

Remarks

Use this property to access the certificate chain of the client connection pinned previously with a PinClient call.

This property is read-only and not available at design time.

Data Type

SecureBlackboxCertificate

Port Property (TSPServer Class)

Specifies the port number to listen for connections on.

Syntax

ANSI (Cross Platform)
int GetPort();
int SetPort(int iPort);

Unicode (Windows)
INT GetPort();
INT SetPort(INT iPort);

int secureblackbox_tspserver_getport(void* lpObj);
int secureblackbox_tspserver_setport(void* lpObj, int iPort);

int GetPort();
int SetPort(int iPort);

Default Value

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via PortRangeFrom and PortRangeTo properties. In this case the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Data Type

Integer

PortRangeFrom Property (TSPServer Class)

Specifies the lower limit of the listening port range for incoming connections.

Syntax

ANSI (Cross Platform)
int GetPortRangeFrom();
int SetPortRangeFrom(int iPortRangeFrom);

Unicode (Windows)
INT GetPortRangeFrom();
INT SetPortRangeFrom(INT iPortRangeFrom);

int secureblackbox_tspserver_getportrangefrom(void* lpObj);
int secureblackbox_tspserver_setportrangefrom(void* lpObj, int iPortRangeFrom);

int GetPortRangeFrom();
int SetPortRangeFrom(int iPortRangeFrom);

Default Value

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

PortRangeTo Property (TSPServer Class)

Specifies the upper limit of the listening port range for incoming connections.

Syntax

ANSI (Cross Platform)
int GetPortRangeTo();
int SetPortRangeTo(int iPortRangeTo);

Unicode (Windows)
INT GetPortRangeTo();
INT SetPortRangeTo(INT iPortRangeTo);

int secureblackbox_tspserver_getportrangeto(void* lpObj);
int secureblackbox_tspserver_setportrangeto(void* lpObj, int iPortRangeTo);

int GetPortRangeTo();
int SetPortRangeTo(int iPortRangeTo);

Default Value

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

Data Type

Integer

SessionTimeout Property (TSPServer Class)

Specifies the default session timeout value in milliseconds.

Syntax

ANSI (Cross Platform)
int GetSessionTimeout();
int SetSessionTimeout(int iSessionTimeout);

Unicode (Windows)
INT GetSessionTimeout();
INT SetSessionTimeout(INT iSessionTimeout);

int secureblackbox_tspserver_getsessiontimeout(void* lpObj);
int secureblackbox_tspserver_setsessiontimeout(void* lpObj, int iSessionTimeout);

int GetSessionTimeout();
int SetSessionTimeout(int iSessionTimeout);

Default Value

360000

Remarks

Specifies the period of inactivity (in milliseconds) after which the connection will be terminated by the server.

Data Type

Integer

SigningCertificate Property (TSPServer Class)

The certificate to be used for signing.

Syntax

SecureBlackboxCertificate* GetSigningCertificate();
int SetSigningCertificate(SecureBlackboxCertificate* val);

int secureblackbox_tspserver_getsigningcertbytes(void* lpObj, char** lpSigningCertBytes, int* lenSigningCertBytes);

int64 secureblackbox_tspserver_getsigningcerthandle(void* lpObj);
int secureblackbox_tspserver_setsigningcerthandle(void* lpObj, int64 lSigningCertHandle);

QByteArray GetSigningCertBytes();

qint64 GetSigningCertHandle();
int SetSigningCertHandle(qint64 lSigningCertHandle);

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

This property is not available at design time.

Data Type

SecureBlackboxCertificate

SigningChain Property (TSPServer Class)

The signing certificate chain.

Syntax

SecureBlackboxList<SecureBlackboxCertificate>* GetSigningChain();
int SetSigningChain(SecureBlackboxList<SecureBlackboxCertificate>* val);

int secureblackbox_tspserver_getsigningchaincount(void* lpObj);
int secureblackbox_tspserver_setsigningchaincount(void* lpObj, int iSigningChainCount);

int secureblackbox_tspserver_getsigningchainbytes(void* lpObj, int signingchainindex, char** lpSigningChainBytes, int* lenSigningChainBytes);

int64 secureblackbox_tspserver_getsigningchainhandle(void* lpObj, int signingchainindex);
int secureblackbox_tspserver_setsigningchainhandle(void* lpObj, int signingchainindex, int64 lSigningChainHandle);

int GetSigningChainCount();
int SetSigningChainCount(int iSigningChainCount);

QByteArray GetSigningChainBytes(int iSigningChainIndex);

qint64 GetSigningChainHandle(int iSigningChainIndex);
int SetSigningChainHandle(int iSigningChainIndex, qint64 lSigningChainHandle);

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

This property is not available at design time.

Data Type

SecureBlackboxCertificate

SocketSettings Property (TSPServer Class)

Manages network connection settings.

Syntax

SecureBlackboxSocketSettings* GetSocketSettings();

int secureblackbox_tspserver_getsocketincomingspeedlimit(void* lpObj);
int secureblackbox_tspserver_setsocketincomingspeedlimit(void* lpObj, int iSocketIncomingSpeedLimit);

char* secureblackbox_tspserver_getsocketlocaladdress(void* lpObj);
int secureblackbox_tspserver_setsocketlocaladdress(void* lpObj, const char* lpszSocketLocalAddress);

int secureblackbox_tspserver_getsocketlocalport(void* lpObj);
int secureblackbox_tspserver_setsocketlocalport(void* lpObj, int iSocketLocalPort);

int secureblackbox_tspserver_getsocketoutgoingspeedlimit(void* lpObj);
int secureblackbox_tspserver_setsocketoutgoingspeedlimit(void* lpObj, int iSocketOutgoingSpeedLimit);

int secureblackbox_tspserver_getsockettimeout(void* lpObj);
int secureblackbox_tspserver_setsockettimeout(void* lpObj, int iSocketTimeout);

int secureblackbox_tspserver_getsocketuseipv6(void* lpObj);
int secureblackbox_tspserver_setsocketuseipv6(void* lpObj, int bSocketUseIPv6);

int GetSocketIncomingSpeedLimit();
int SetSocketIncomingSpeedLimit(int iSocketIncomingSpeedLimit);

QString GetSocketLocalAddress();
int SetSocketLocalAddress(QString qsSocketLocalAddress);

int GetSocketLocalPort();
int SetSocketLocalPort(int iSocketLocalPort);

int GetSocketOutgoingSpeedLimit();
int SetSocketOutgoingSpeedLimit(int iSocketOutgoingSpeedLimit);

int GetSocketTimeout();
int SetSocketTimeout(int iSocketTimeout);

bool GetSocketUseIPv6();
int SetSocketUseIPv6(bool bSocketUseIPv6);

Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Data Type

SecureBlackboxSocketSettings

TLSServerChain Property (TSPServer Class)

The server's TLS certificates.

Syntax

SecureBlackboxList<SecureBlackboxCertificate>* GetTLSServerChain();
int SetTLSServerChain(SecureBlackboxList<SecureBlackboxCertificate>* val);

int secureblackbox_tspserver_gettlsservercertcount(void* lpObj);
int secureblackbox_tspserver_settlsservercertcount(void* lpObj, int iTLSServerCertCount);

int secureblackbox_tspserver_gettlsservercertbytes(void* lpObj, int tlsservercertindex, char** lpTLSServerCertBytes, int* lenTLSServerCertBytes);

int64 secureblackbox_tspserver_gettlsservercerthandle(void* lpObj, int tlsservercertindex);
int secureblackbox_tspserver_settlsservercerthandle(void* lpObj, int tlsservercertindex, int64 lTLSServerCertHandle);

int GetTLSServerCertCount();
int SetTLSServerCertCount(int iTLSServerCertCount);

QByteArray GetTLSServerCertBytes(int iTLSServerCertIndex);

qint64 GetTLSServerCertHandle(int iTLSServerCertIndex);
int SetTLSServerCertHandle(int iTLSServerCertIndex, qint64 lTLSServerCertHandle);

Remarks

Use this property to provide a list of TLS certificates for the server endpoint.

A TLS endpoint needs a certificate to be able to accept TLS connections. At least one of the certificates in the collection - the endpoint certificate - must have a private key associated with it.

The collection may include more than one endpoint certificate, and more than one chain. A typical usage scenario is to include two chains (ECDSA and RSA), to cater for clients with different cipher suite preferences.

This property is not available at design time.

Data Type

SecureBlackboxCertificate

TLSSettings Property (TSPServer Class)

Manages TLS layer settings.

Syntax

SecureBlackboxTLSSettings* GetTLSSettings();

int secureblackbox_tspserver_gettlsautovalidatecertificates(void* lpObj);
int secureblackbox_tspserver_settlsautovalidatecertificates(void* lpObj, int bTLSAutoValidateCertificates);

int secureblackbox_tspserver_gettlsbaseconfiguration(void* lpObj);
int secureblackbox_tspserver_settlsbaseconfiguration(void* lpObj, int iTLSBaseConfiguration);

char* secureblackbox_tspserver_gettlsciphersuites(void* lpObj);
int secureblackbox_tspserver_settlsciphersuites(void* lpObj, const char* lpszTLSCiphersuites);

int secureblackbox_tspserver_gettlsclientauth(void* lpObj);
int secureblackbox_tspserver_settlsclientauth(void* lpObj, int iTLSClientAuth);

char* secureblackbox_tspserver_gettlseccurves(void* lpObj);
int secureblackbox_tspserver_settlseccurves(void* lpObj, const char* lpszTLSECCurves);

char* secureblackbox_tspserver_gettlsextensions(void* lpObj);
int secureblackbox_tspserver_settlsextensions(void* lpObj, const char* lpszTLSExtensions);

int secureblackbox_tspserver_gettlsforceresumeifdestinationchanges(void* lpObj);
int secureblackbox_tspserver_settlsforceresumeifdestinationchanges(void* lpObj, int bTLSForceResumeIfDestinationChanges);

char* secureblackbox_tspserver_gettlspresharedidentity(void* lpObj);
int secureblackbox_tspserver_settlspresharedidentity(void* lpObj, const char* lpszTLSPreSharedIdentity);

char* secureblackbox_tspserver_gettlspresharedkey(void* lpObj);
int secureblackbox_tspserver_settlspresharedkey(void* lpObj, const char* lpszTLSPreSharedKey);

char* secureblackbox_tspserver_gettlspresharedkeyciphersuite(void* lpObj);
int secureblackbox_tspserver_settlspresharedkeyciphersuite(void* lpObj, const char* lpszTLSPreSharedKeyCiphersuite);

int secureblackbox_tspserver_gettlsrenegotiationattackpreventionmode(void* lpObj);
int secureblackbox_tspserver_settlsrenegotiationattackpreventionmode(void* lpObj, int iTLSRenegotiationAttackPreventionMode);

int secureblackbox_tspserver_gettlsrevocationcheck(void* lpObj);
int secureblackbox_tspserver_settlsrevocationcheck(void* lpObj, int iTLSRevocationCheck);

int secureblackbox_tspserver_gettlsssloptions(void* lpObj);
int secureblackbox_tspserver_settlsssloptions(void* lpObj, int iTLSSSLOptions);

int secureblackbox_tspserver_gettlstlsmode(void* lpObj);
int secureblackbox_tspserver_settlstlsmode(void* lpObj, int iTLSTLSMode);

int secureblackbox_tspserver_gettlsuseextendedmastersecret(void* lpObj);
int secureblackbox_tspserver_settlsuseextendedmastersecret(void* lpObj, int bTLSUseExtendedMasterSecret);

int secureblackbox_tspserver_gettlsusesessionresumption(void* lpObj);
int secureblackbox_tspserver_settlsusesessionresumption(void* lpObj, int bTLSUseSessionResumption);

int secureblackbox_tspserver_gettlsversions(void* lpObj);
int secureblackbox_tspserver_settlsversions(void* lpObj, int iTLSVersions);

bool GetTLSAutoValidateCertificates();
int SetTLSAutoValidateCertificates(bool bTLSAutoValidateCertificates);

int GetTLSBaseConfiguration();
int SetTLSBaseConfiguration(int iTLSBaseConfiguration);

QString GetTLSCiphersuites();
int SetTLSCiphersuites(QString qsTLSCiphersuites);

int GetTLSClientAuth();
int SetTLSClientAuth(int iTLSClientAuth);

QString GetTLSECCurves();
int SetTLSECCurves(QString qsTLSECCurves);

QString GetTLSExtensions();
int SetTLSExtensions(QString qsTLSExtensions);

bool GetTLSForceResumeIfDestinationChanges();
int SetTLSForceResumeIfDestinationChanges(bool bTLSForceResumeIfDestinationChanges);

QString GetTLSPreSharedIdentity();
int SetTLSPreSharedIdentity(QString qsTLSPreSharedIdentity);

QString GetTLSPreSharedKey();
int SetTLSPreSharedKey(QString qsTLSPreSharedKey);

QString GetTLSPreSharedKeyCiphersuite();
int SetTLSPreSharedKeyCiphersuite(QString qsTLSPreSharedKeyCiphersuite);

int GetTLSRenegotiationAttackPreventionMode();
int SetTLSRenegotiationAttackPreventionMode(int iTLSRenegotiationAttackPreventionMode);

int GetTLSRevocationCheck();
int SetTLSRevocationCheck(int iTLSRevocationCheck);

int GetTLSSSLOptions();
int SetTLSSSLOptions(int iTLSSSLOptions);

int GetTLSTLSMode();
int SetTLSTLSMode(int iTLSTLSMode);

bool GetTLSUseExtendedMasterSecret();
int SetTLSUseExtendedMasterSecret(bool bTLSUseExtendedMasterSecret);

bool GetTLSUseSessionResumption();
int SetTLSUseSessionResumption(bool bTLSUseSessionResumption);

int GetTLSVersions();
int SetTLSVersions(int iTLSVersions);

Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

Data Type

SecureBlackboxTLSSettings

TSAName Property (TSPServer Class)

Specifies the name of TSA.

Syntax

ANSI (Cross Platform)
char* GetTSAName();
int SetTSAName(const char* lpszTSAName);

Unicode (Windows)
LPWSTR GetTSAName();
INT SetTSAName(LPCWSTR lpszTSAName);

char* secureblackbox_tspserver_gettsaname(void* lpObj);
int secureblackbox_tspserver_settsaname(void* lpObj, const char* lpszTSAName);

QString GetTSAName();
int SetTSAName(QString qsTSAName);

Default Value

Remarks

Use this property to provide the alternative name of the TSA, in RDN format.

Data Type

String

Users Property (TSPServer Class)

Provides a list of registered users.

Syntax

SecureBlackboxList<SecureBlackboxUserAccount>* GetUsers();
int SetUsers(SecureBlackboxList<SecureBlackboxUserAccount>* val);

int secureblackbox_tspserver_getusercount(void* lpObj);
int secureblackbox_tspserver_setusercount(void* lpObj, int iUserCount);

int secureblackbox_tspserver_getuserassociateddata(void* lpObj, int userindex, char** lpUserAssociatedData, int* lenUserAssociatedData);
int secureblackbox_tspserver_setuserassociateddata(void* lpObj, int userindex, const char* lpUserAssociatedData, int lenUserAssociatedData);

char* secureblackbox_tspserver_getuserbasepath(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserbasepath(void* lpObj, int userindex, const char* lpszUserBasePath);

char* secureblackbox_tspserver_getuserdata(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserdata(void* lpObj, int userindex, const char* lpszUserData);

int64 secureblackbox_tspserver_getuserhandle(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserhandle(void* lpObj, int userindex, int64 lUserHandle);

char* secureblackbox_tspserver_getuserhashalgorithm(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserhashalgorithm(void* lpObj, int userindex, const char* lpszUserHashAlgorithm);

int secureblackbox_tspserver_getuserincomingspeedlimit(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserincomingspeedlimit(void* lpObj, int userindex, int iUserIncomingSpeedLimit);

int secureblackbox_tspserver_getuseroutgoingspeedlimit(void* lpObj, int userindex);
int secureblackbox_tspserver_setuseroutgoingspeedlimit(void* lpObj, int userindex, int iUserOutgoingSpeedLimit);

char* secureblackbox_tspserver_getuserpassword(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserpassword(void* lpObj, int userindex, const char* lpszUserPassword);

int secureblackbox_tspserver_getusersharedsecret(void* lpObj, int userindex, char** lpUserSharedSecret, int* lenUserSharedSecret);
int secureblackbox_tspserver_setusersharedsecret(void* lpObj, int userindex, const char* lpUserSharedSecret, int lenUserSharedSecret);

char* secureblackbox_tspserver_getuserusername(void* lpObj, int userindex);
int secureblackbox_tspserver_setuserusername(void* lpObj, int userindex, const char* lpszUserUsername);

int GetUserCount();
int SetUserCount(int iUserCount);

QByteArray GetUserAssociatedData(int iUserIndex);
int SetUserAssociatedData(int iUserIndex, QByteArray qbaUserAssociatedData);

QString GetUserBasePath(int iUserIndex);
int SetUserBasePath(int iUserIndex, QString qsUserBasePath);

QString GetUserData(int iUserIndex);
int SetUserData(int iUserIndex, QString qsUserData);

qint64 GetUserHandle(int iUserIndex);
int SetUserHandle(int iUserIndex, qint64 lUserHandle);

QString GetUserHashAlgorithm(int iUserIndex);
int SetUserHashAlgorithm(int iUserIndex, QString qsUserHashAlgorithm);

int GetUserIncomingSpeedLimit(int iUserIndex);
int SetUserIncomingSpeedLimit(int iUserIndex, int iUserIncomingSpeedLimit);

int GetUserOutgoingSpeedLimit(int iUserIndex);
int SetUserOutgoingSpeedLimit(int iUserIndex, int iUserOutgoingSpeedLimit);

QString GetUserPassword(int iUserIndex);
int SetUserPassword(int iUserIndex, QString qsUserPassword);

QByteArray GetUserSharedSecret(int iUserIndex);
int SetUserSharedSecret(int iUserIndex, QByteArray qbaUserSharedSecret);

QString GetUserUsername(int iUserIndex);
int SetUserUsername(int iUserIndex, QString qsUserUsername);

Remarks

Assign a list of 'known' users to this property to automate authentication handling by the class.

This property is not available at design time.

Data Type

SecureBlackboxUserAccount

WebsiteName Property (TSPServer Class)

Specifies the web site name to use in the certificate.

Syntax

ANSI (Cross Platform)
char* GetWebsiteName();
int SetWebsiteName(const char* lpszWebsiteName);

Unicode (Windows)
LPWSTR GetWebsiteName();
INT SetWebsiteName(LPCWSTR lpszWebsiteName);

char* secureblackbox_tspserver_getwebsitename(void* lpObj);
int secureblackbox_tspserver_setwebsitename(void* lpObj, const char* lpszWebsiteName);

QString GetWebsiteName();
int SetWebsiteName(QString qsWebsiteName);

Default Value

"secureblackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

Data Type

String

Config Method (TSPServer Class)

This method sets or retrieves a configuration setting.

Syntax

ANSI (Cross Platform)
char* Config(const char* lpszConfigurationString);

Unicode (Windows)
LPWSTR Config(LPCWSTR lpszConfigurationString);

char* secureblackbox_tspserver_config(void* lpObj, const char* lpszConfigurationString);

QString Config(const QString& qsConfigurationString);

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

Error Handling (C++)

This method returns a String value; after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

DoAction Method (TSPServer Class)

Performs an additional action.

Syntax

ANSI (Cross Platform)
char* DoAction(const char* lpszActionID, const char* lpszActionParams);

Unicode (Windows)
LPWSTR DoAction(LPCWSTR lpszActionID, LPCWSTR lpszActionParams);

char* secureblackbox_tspserver_doaction(void* lpObj, const char* lpszActionID, const char* lpszActionParams);

QString DoAction(const QString& qsActionID, const QString& qsActionParams);

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Error Handling (C++)

DropClient Method (TSPServer Class)

Terminates a client connection.

Syntax

ANSI (Cross Platform)
int DropClient(int64 lConnectionId, int bForced);

Unicode (Windows)
INT DropClient(LONG64 lConnectionId, BOOL bForced);

int secureblackbox_tspserver_dropclient(void* lpObj, int64 lConnectionId, int bForced);

int DropClient(qint64 lConnectionId, bool bForced);

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

Error Handling (C++)

This method returns a result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message. (Note: This method's result code can also be obtained by calling the GetLastErrorCode() method after it returns.)

GetRequestBytes Method (TSPServer Class)

Returns the contents of the client's HTTP request.

Syntax

ANSI (Cross Platform)
char* GetRequestBytes(int64 lConnectionId, int *lpSize = NULL);

Unicode (Windows)
LPSTR GetRequestBytes(LONG64 lConnectionId, LPINT lpSize = NULL);

char* secureblackbox_tspserver_getrequestbytes(void* lpObj, int64 lConnectionId, int *lpSize);

QByteArray GetRequestBytes(qint64 lConnectionId);

Remarks

Use this method to get the body of the client's HTTP request. Note that the body of GET and HEAD requests is empty.

Error Handling (C++)

This method returns a Byte Array value (with length lpSize); after it returns, call the GetLastErrorCode() method to obtain its result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

GetRequestHeader Method (TSPServer Class)

Returns a request header value.

Syntax

ANSI (Cross Platform)
char* GetRequestHeader(int64 lConnectionId, const char* lpszHeaderName);

Unicode (Windows)
LPWSTR GetRequestHeader(LONG64 lConnectionId, LPCWSTR lpszHeaderName);

char* secureblackbox_tspserver_getrequestheader(void* lpObj, int64 lConnectionId, const char* lpszHeaderName);

QString GetRequestHeader(qint64 lConnectionId, const QString& qsHeaderName);

Remarks

Use this method to get the value of a request header. A good place to call this method is a request-marking event, such as GetRequest or PostRequest.

Error Handling (C++)

GetRequestString Method (TSPServer Class)

Returns the contents of the client's HTTP request.

Syntax

ANSI (Cross Platform)
char* GetRequestString(int64 lConnectionId);

Unicode (Windows)
LPWSTR GetRequestString(LONG64 lConnectionId);

char* secureblackbox_tspserver_getrequeststring(void* lpObj, int64 lConnectionId);

QString GetRequestString(qint64 lConnectionId);

Remarks

Use this method to get the body of the client's HTTP request to a string. Note that the body of GET and HEAD requests is empty.

Error Handling (C++)

GetRequestUsername Method (TSPServer Class)

Returns the username for a connection.

Syntax

ANSI (Cross Platform)
char* GetRequestUsername(int64 lConnectionId);

Unicode (Windows)
LPWSTR GetRequestUsername(LONG64 lConnectionId);

char* secureblackbox_tspserver_getrequestusername(void* lpObj, int64 lConnectionId);

QString GetRequestUsername(qint64 lConnectionId);

Remarks

Use this method to obtain a username for an active connection. The method will return an empty string if no authentication has been performed on the connection.

Error Handling (C++)

ListClients Method (TSPServer Class)

Enumerates the connected clients.

Syntax

ANSI (Cross Platform)
char* ListClients();

Unicode (Windows)
LPWSTR ListClients();

char* secureblackbox_tspserver_listclients(void* lpObj);

QString ListClients();

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

Error Handling (C++)

PinClient Method (TSPServer Class)

Takes a snapshot of the connection's properties.

Syntax

ANSI (Cross Platform)
int PinClient(int64 lConnectionId);

Unicode (Windows)
INT PinClient(LONG64 lConnectionId);

int secureblackbox_tspserver_pinclient(void* lpObj, int64 lConnectionId);

int PinClient(qint64 lConnectionId);

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in PinnedClient and PinnedClientChain properties.

Error Handling (C++)

ProcessGenericRequest Method (TSPServer Class)

Processes a generic timestamp request.

Syntax

ANSI (Cross Platform)
char* ProcessGenericRequest(const char* lpRequestBytes, int lenRequestBytes, int bTimeTokenOnly, int *lpSize = NULL);

Unicode (Windows)
LPSTR ProcessGenericRequest(LPCSTR lpRequestBytes, INT lenRequestBytes, BOOL bTimeTokenOnly, LPINT lpSize = NULL);

char* secureblackbox_tspserver_processgenericrequest(void* lpObj, const char* lpRequestBytes, int lenRequestBytes, int bTimeTokenOnly, int *lpSize);

QByteArray ProcessGenericRequest(QByteArray qbaRequestBytes, bool bTimeTokenOnly);

Remarks

This method processes a generic timestamping request and produces a response. Use it to generate timestamps for requests obtained externally, out of the default HTTP channel.

This method respects all current settings of the server object, and invokes TimestampRequest to consult about the request and response details with the application.

If TimeTokenOnly is set, the return value will only contain the TimeStampToken piece of the response. If it is switched off, the whole TimeStampResp structure will be returned.

Error Handling (C++)

Reset Method (TSPServer Class)

Resets the class settings.

Syntax

ANSI (Cross Platform)
int Reset();

Unicode (Windows)
INT Reset();

int secureblackbox_tspserver_reset(void* lpObj);

int Reset();

Remarks

Reset is a generic method available in every class.

Error Handling (C++)

Start Method (TSPServer Class)

Starts the TSP server.

Syntax

ANSI (Cross Platform)
int Start();

Unicode (Windows)
INT Start();

int secureblackbox_tspserver_start(void* lpObj);

int Start();

Remarks

Use this method to start listening for incoming connections.

Error Handling (C++)

Stop Method (TSPServer Class)

Stops the TSP server.

Syntax

ANSI (Cross Platform)
int Stop();

Unicode (Windows)
INT Stop();

int secureblackbox_tspserver_stop(void* lpObj);

int Stop();

Remarks

Call this method to stop listening for incoming connections.

Error Handling (C++)

Timestamp Method (TSPServer Class)

Creates a timestamp from the message imprint.

Syntax

ANSI (Cross Platform)
char* Timestamp(const char* lpszHashAlgorithm, const char* lpMessageImprint, int lenMessageImprint, const char* lpszTime, int bTimeTokenOnly, int *lpSize = NULL);

Unicode (Windows)
LPSTR Timestamp(LPCWSTR lpszHashAlgorithm, LPCSTR lpMessageImprint, INT lenMessageImprint, LPCWSTR lpszTime, BOOL bTimeTokenOnly, LPINT lpSize = NULL);

char* secureblackbox_tspserver_timestamp(void* lpObj, const char* lpszHashAlgorithm, const char* lpMessageImprint, int lenMessageImprint, const char* lpszTime, int bTimeTokenOnly, int *lpSize);

QByteArray Timestamp(const QString& qsHashAlgorithm, QByteArray qbaMessageImprint, const QString& qsTime, bool bTimeTokenOnly);

Remarks

This method generates an RFC3161 timestamp over the provided MessageImprint. Use it to generate timestamps for a known message imprint and time.

The server does not to be started/listening for this method to work. This method respects all current settings of the server object, and invokes TimestampRequest to consult about the request and response details with the application.

If TimeTokenOnly is set, the return value will only contain the TimeStampToken piece of the response. If it is switched off, the whole TimeStampResp structure will be returned.

Error Handling (C++)

Accept Event (TSPServer Class)

Reports an incoming connection.

Syntax

ANSI (Cross Platform)
virtual int FireAccept(TSPServerAcceptEventParams *e);

typedef struct {
  const char *RemoteAddress;
  int RemotePort;
  int Accept;
  int reserved;
} TSPServerAcceptEventParams;


Unicode (Windows)
virtual INT FireAccept(TSPServerAcceptEventParams *e);

typedef struct {
  LPCWSTR RemoteAddress;
  INT RemotePort;
  BOOL Accept;
  INT reserved;
} TSPServerAcceptEventParams;

#define EID_TSPSERVER_ACCEPT 1

virtual INT SECUREBLACKBOX_CALL FireAccept(LPSTR &lpszRemoteAddress, INT &iRemotePort, BOOL &bAccept);

class TSPServerAcceptEventParams {
public:
  const QString &RemoteAddress();

  int RemotePort();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Accept(TSPServerAcceptEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireAccept(TSPServerAcceptEventParams *e) {...}

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to Connect event to be notified of every connection that has been set up.

AuthAttempt Event (TSPServer Class)

Fires when a connected client makes an authentication attempt.

Syntax

ANSI (Cross Platform)
virtual int FireAuthAttempt(TSPServerAuthAttemptEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *HTTPMethod;
  const char *URI;
  const char *AuthMethod;
  const char *Username;
  const char *Password;
  int Allow;
  int reserved;
} TSPServerAuthAttemptEventParams;


Unicode (Windows)
virtual INT FireAuthAttempt(TSPServerAuthAttemptEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR HTTPMethod;
  LPCWSTR URI;
  LPCWSTR AuthMethod;
  LPCWSTR Username;
  LPCWSTR Password;
  BOOL Allow;
  INT reserved;
} TSPServerAuthAttemptEventParams;

#define EID_TSPSERVER_AUTHATTEMPT 2

virtual INT SECUREBLACKBOX_CALL FireAuthAttempt(LONG64 &lConnectionID, LPSTR &lpszHTTPMethod, LPSTR &lpszURI, LPSTR &lpszAuthMethod, LPSTR &lpszUsername, LPSTR &lpszPassword, BOOL &bAllow);

class TSPServerAuthAttemptEventParams {
public:
  qint64 ConnectionID();

  const QString &HTTPMethod();

  const QString &URI();

  const QString &AuthMethod();

  const QString &Username();

  const QString &Password();

  bool Allow();
  void SetAllow(bool bAllow);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void AuthAttempt(TSPServerAuthAttemptEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireAuthAttempt(TSPServerAuthAttemptEventParams *e) {...}

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

ConnectionID contains the unique session identifier for that client, HTTPMethod specifies the HTTP method (GET, POST, etc.) used to access the URI resource, AuthMethod specifies the authentication method, and Username and Password contain the professed credentials.

Connect Event (TSPServer Class)

Reports an accepted connection.

Syntax

ANSI (Cross Platform)
virtual int FireConnect(TSPServerConnectEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *RemoteAddress;
  int RemotePort;
  int reserved;
} TSPServerConnectEventParams;


Unicode (Windows)
virtual INT FireConnect(TSPServerConnectEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR RemoteAddress;
  INT RemotePort;
  INT reserved;
} TSPServerConnectEventParams;

#define EID_TSPSERVER_CONNECT 3

virtual INT SECUREBLACKBOX_CALL FireConnect(LONG64 &lConnectionID, LPSTR &lpszRemoteAddress, INT &iRemotePort);

class TSPServerConnectEventParams {
public:
  qint64 ConnectionID();

  const QString &RemoteAddress();

  int RemotePort();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Connect(TSPServerConnectEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireConnect(TSPServerConnectEventParams *e) {...}

Remarks

The class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as TLSHandshake or Data.

Disconnect Event (TSPServer Class)

Fires to report a disconnected client.

Syntax

ANSI (Cross Platform)
virtual int FireDisconnect(TSPServerDisconnectEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} TSPServerDisconnectEventParams;


Unicode (Windows)
virtual INT FireDisconnect(TSPServerDisconnectEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} TSPServerDisconnectEventParams;

#define EID_TSPSERVER_DISCONNECT 4

virtual INT SECUREBLACKBOX_CALL FireDisconnect(LONG64 &lConnectionID);

class TSPServerDisconnectEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Disconnect(TSPServerDisconnectEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireDisconnect(TSPServerDisconnectEventParams *e) {...}

Remarks

The class fires this event when a connected client disconnects.

Error Event (TSPServer Class)

Information about errors during data delivery.

Syntax

ANSI (Cross Platform)
virtual int FireError(TSPServerErrorEventParams *e);

typedef struct {
  int64 ConnectionID;
  int ErrorCode;
  int Fatal;
  int Remote;
  const char *Description;
  int reserved;
} TSPServerErrorEventParams;


Unicode (Windows)
virtual INT FireError(TSPServerErrorEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT ErrorCode;
  BOOL Fatal;
  BOOL Remote;
  LPCWSTR Description;
  INT reserved;
} TSPServerErrorEventParams;

#define EID_TSPSERVER_ERROR 5

virtual INT SECUREBLACKBOX_CALL FireError(LONG64 &lConnectionID, INT &iErrorCode, BOOL &bFatal, BOOL &bRemote, LPSTR &lpszDescription);

class TSPServerErrorEventParams {
public:
  qint64 ConnectionID();

  int ErrorCode();

  bool Fatal();

  bool Remote();

  const QString &Description();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Error(TSPServerErrorEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireError(TSPServerErrorEventParams *e) {...}

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

ExternalSign Event (TSPServer Class)

Handles remote or external signing initiated by the server protocol.

Syntax

ANSI (Cross Platform)
virtual int FireExternalSign(TSPServerExternalSignEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *OperationId;
  const char *HashAlgorithm;
  const char *Pars;
  const char *Data;
  char *SignedData;
  int reserved;
} TSPServerExternalSignEventParams;


Unicode (Windows)
virtual INT FireExternalSign(TSPServerExternalSignEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR OperationId;
  LPCWSTR HashAlgorithm;
  LPCWSTR Pars;
  LPCWSTR Data;
  LPWSTR SignedData;
  INT reserved;
} TSPServerExternalSignEventParams;

#define EID_TSPSERVER_EXTERNALSIGN 6

virtual INT SECUREBLACKBOX_CALL FireExternalSign(LONG64 &lConnectionID, LPSTR &lpszOperationId, LPSTR &lpszHashAlgorithm, LPSTR &lpszPars, LPSTR &lpszData, LPSTR &lpszSignedData);

class TSPServerExternalSignEventParams {
public:
  qint64 ConnectionID();

  const QString &OperationId();

  const QString &HashAlgorithm();

  const QString &Pars();

  const QString &Data();

  const QString &SignedData();
  void SetSignedData(const QString &qsSignedData);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void ExternalSign(TSPServerExternalSignEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireExternalSign(TSPServerExternalSignEventParams *e) {...}

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (TSPServer Class)

This event notifies the application about an underlying control flow event.

Syntax

ANSI (Cross Platform)
virtual int FireNotification(TSPServerNotificationEventParams *e);

typedef struct {
  const char *EventID;
  const char *EventParam;
  int reserved;
} TSPServerNotificationEventParams;


Unicode (Windows)
virtual INT FireNotification(TSPServerNotificationEventParams *e);

typedef struct {
  LPCWSTR EventID;
  LPCWSTR EventParam;
  INT reserved;
} TSPServerNotificationEventParams;

#define EID_TSPSERVER_NOTIFICATION 7

virtual INT SECUREBLACKBOX_CALL FireNotification(LPSTR &lpszEventID, LPSTR &lpszEventParam);

class TSPServerNotificationEventParams {
public:
  const QString &EventID();

  const QString &EventParam();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void Notification(TSPServerNotificationEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireNotification(TSPServerNotificationEventParams *e) {...}

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

TimestampRequest Event (TSPServer Class)

Reports an incoming timestamp request.

Syntax

ANSI (Cross Platform)
virtual int FireTimestampRequest(TSPServerTimestampRequestEventParams *e);

typedef struct {
  int64 ConnectionId;
  const char *HashAlgorithm;
  const char *MessageImprint;
  int lenMessageImprint;
  char *Time;
  int Accept;
  int reserved;
} TSPServerTimestampRequestEventParams;


Unicode (Windows)
virtual INT FireTimestampRequest(TSPServerTimestampRequestEventParams *e);

typedef struct {
  LONG64 ConnectionId;
  LPCWSTR HashAlgorithm;
  LPCSTR MessageImprint;
  INT lenMessageImprint;
  LPWSTR Time;
  BOOL Accept;
  INT reserved;
} TSPServerTimestampRequestEventParams;

#define EID_TSPSERVER_TIMESTAMPREQUEST 8

virtual INT SECUREBLACKBOX_CALL FireTimestampRequest(LONG64 &lConnectionId, LPSTR &lpszHashAlgorithm, LPSTR &lpMessageImprint, INT &lenMessageImprint, LPSTR &lpszTime, BOOL &bAccept);

class TSPServerTimestampRequestEventParams {
public:
  qint64 ConnectionId();

  const QString &HashAlgorithm();

  const QByteArray &MessageImprint();

  const QString &Time();
  void SetTime(const QString &qsTime);

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TimestampRequest(TSPServerTimestampRequestEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTimestampRequest(TSPServerTimestampRequestEventParams *e) {...}

Remarks

This event is fired when a new incoming timestamp request is received. Use it to track or alter the details of a generated timestamp.

MessageImprint contains the digest of the message that needs to be timestamped, which was created using HashAlgorithm. Time is the time to be certified. Set Accept to true to accept the request and generate a timestamp, or to false to reject the request.

Supported hash algorithms:


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

TLSCertValidate Event (TSPServer Class)

Fires when a client certificate needs to be validated.

Syntax

ANSI (Cross Platform)
virtual int FireTLSCertValidate(TSPServerTLSCertValidateEventParams *e);

typedef struct {
  int64 ConnectionID;
  int Accept;
  int reserved;
} TSPServerTLSCertValidateEventParams;


Unicode (Windows)
virtual INT FireTLSCertValidate(TSPServerTLSCertValidateEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  BOOL Accept;
  INT reserved;
} TSPServerTLSCertValidateEventParams;

#define EID_TSPSERVER_TLSCERTVALIDATE 9

virtual INT SECUREBLACKBOX_CALL FireTLSCertValidate(LONG64 &lConnectionID, BOOL &bAccept);

class TSPServerTLSCertValidateEventParams {
public:
  qint64 ConnectionID();

  bool Accept();
  void SetAccept(bool bAccept);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSCertValidate(TSPServerTLSCertValidateEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTLSCertValidate(TSPServerTLSCertValidateEventParams *e) {...}

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

TLSEstablished Event (TSPServer Class)

Reports the setup of a TLS session.

Syntax

ANSI (Cross Platform)
virtual int FireTLSEstablished(TSPServerTLSEstablishedEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} TSPServerTLSEstablishedEventParams;


Unicode (Windows)
virtual INT FireTLSEstablished(TSPServerTLSEstablishedEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} TSPServerTLSEstablishedEventParams;

#define EID_TSPSERVER_TLSESTABLISHED 10

virtual INT SECUREBLACKBOX_CALL FireTLSEstablished(LONG64 &lConnectionID);

class TSPServerTLSEstablishedEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSEstablished(TSPServerTLSEstablishedEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTLSEstablished(TSPServerTLSEstablishedEventParams *e) {...}

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

TLSHandshake Event (TSPServer Class)

Fires when a newly established client connection initiates a TLS handshake.

Syntax

ANSI (Cross Platform)
virtual int FireTLSHandshake(TSPServerTLSHandshakeEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *ServerName;
  int Abort;
  int reserved;
} TSPServerTLSHandshakeEventParams;


Unicode (Windows)
virtual INT FireTLSHandshake(TSPServerTLSHandshakeEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR ServerName;
  BOOL Abort;
  INT reserved;
} TSPServerTLSHandshakeEventParams;

#define EID_TSPSERVER_TLSHANDSHAKE 11

virtual INT SECUREBLACKBOX_CALL FireTLSHandshake(LONG64 &lConnectionID, LPSTR &lpszServerName, BOOL &bAbort);

class TSPServerTLSHandshakeEventParams {
public:
  qint64 ConnectionID();

  const QString &ServerName();

  bool Abort();
  void SetAbort(bool bAbort);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSHandshake(TSPServerTLSHandshakeEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTLSHandshake(TSPServerTLSHandshakeEventParams *e) {...}

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

TLSPSK Event (TSPServer Class)

Requests a pre-shared key for TLS-PSK.

Syntax

ANSI (Cross Platform)
virtual int FireTLSPSK(TSPServerTLSPSKEventParams *e);

typedef struct {
  int64 ConnectionID;
  const char *Identity;
  char *PSK;
  char *Ciphersuite;
  int reserved;
} TSPServerTLSPSKEventParams;


Unicode (Windows)
virtual INT FireTLSPSK(TSPServerTLSPSKEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  LPCWSTR Identity;
  LPWSTR PSK;
  LPWSTR Ciphersuite;
  INT reserved;
} TSPServerTLSPSKEventParams;

#define EID_TSPSERVER_TLSPSK 12

virtual INT SECUREBLACKBOX_CALL FireTLSPSK(LONG64 &lConnectionID, LPSTR &lpszIdentity, LPSTR &lpszPSK, LPSTR &lpszCiphersuite);

class TSPServerTLSPSKEventParams {
public:
  qint64 ConnectionID();

  const QString &Identity();

  const QString &PSK();
  void SetPSK(const QString &qsPSK);

  const QString &Ciphersuite();
  void SetCiphersuite(const QString &qsCiphersuite);

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSPSK(TSPServerTLSPSKEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTLSPSK(TSPServerTLSPSKEventParams *e) {...}

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

TLSShutdown Event (TSPServer Class)

Reports closure of a TLS session.

Syntax

ANSI (Cross Platform)
virtual int FireTLSShutdown(TSPServerTLSShutdownEventParams *e);

typedef struct {
  int64 ConnectionID;
  int reserved;
} TSPServerTLSShutdownEventParams;


Unicode (Windows)
virtual INT FireTLSShutdown(TSPServerTLSShutdownEventParams *e);

typedef struct {
  LONG64 ConnectionID;
  INT reserved;
} TSPServerTLSShutdownEventParams;

#define EID_TSPSERVER_TLSSHUTDOWN 13

virtual INT SECUREBLACKBOX_CALL FireTLSShutdown(LONG64 &lConnectionID);

class TSPServerTLSShutdownEventParams {
public:
  qint64 ConnectionID();

  int EventRetVal();
  void SetEventRetVal(int iRetVal);
};

// To handle, connect one or more slots to this signal.
void TLSShutdown(TSPServerTLSShutdownEventParams *e);

// Or, subclass TSPServer and override this emitter function.
virtual int FireTLSShutdown(TSPServerTLSShutdownEventParams *e) {...}

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a Disconnect, which marks the closure of the underlying TCP session.

Certificate Type

Encapsulates an individual X.509 certificate.

Syntax

SecureBlackboxCertificate (declared in secureblackbox.h)

Remarks

This type keeps and provides access to X.509 certificate details.

Fields

Bytes
char* (read-only)
Default Value:

Returns the raw certificate data in DER format.

CA
int
Default Value: FALSE

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

CAKeyID
char* (read-only)
Default Value:

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

CertType
int (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

CRLDistributionPoints
char*
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

Curve
char*
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

Fingerprint
char* (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

FriendlyName
char* (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

Handle
int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

HashAlgorithm
char*
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

Issuer
char* (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

IssuerRDN
char*
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

KeyAlgorithm
char*
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

KeyBits
int (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

KeyFingerprint
char* (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

KeyUsage
int
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

KeyValid
int (read-only)
Default Value: FALSE

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
char*
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

OCSPNoCheck
int
Default Value: FALSE

Accessor to the value of the certificate's ocsp-no-check extension.

Origin
int (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

PolicyIDs
char*
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

PrivateKeyBytes
char* (read-only)
Default Value:

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

PrivateKeyExists
int (read-only)
Default Value: FALSE

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

PrivateKeyExtractable
int (read-only)
Default Value: FALSE

Indicates whether the private key is extractable (exportable).

PublicKeyBytes
char* (read-only)
Default Value:

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

Qualified
int (read-only)
Default Value: FALSE

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

QualifiedStatements
int
Default Value: 0

Returns a simplified qualified status of the certificate.

Qualifiers
char* (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

SelfSigned
int (read-only)
Default Value: FALSE

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
char*
Default Value:

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

SigAlgorithm
char* (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

Source
int (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Subject
char* (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

SubjectAlternativeName
char*
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

SubjectKeyID
char*
Default Value:

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

SubjectRDN
char*
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

Valid
int (read-only)
Default Value: FALSE

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

ValidFrom
char*
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

ValidTo
char*
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

Certificate(int *lpSize = NULL)

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Syntax

SecureBlackboxExternalCrypto (declared in secureblackbox.h)

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

AsyncDocumentID
char*
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CustomParams
char*
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

Data
char*
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

ExternalHashCalculation
int
Default Value: FALSE

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

HashAlgorithm
char*
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

KeyID
char*
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

KeySecret
char*
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

Method
int
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

Mode
int
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

PublicKeyAlgorithm
char*
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

ExternalCrypto(int *lpSize = NULL)

Creates a new ExternalCrypto object with default field values.

SocketSettings Type

A container for the socket settings.

Syntax

SecureBlackboxSocketSettings (declared in secureblackbox.h)

Remarks

This type is a container for socket-layer parameters.

Fields

DNSMode
int
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

DNSPort
int
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

DNSQueryTimeout
int
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

DNSServers
char*
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

DNSTotalTimeout
int
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

IncomingSpeedLimit
int
Default Value: 0

The maximum number of bytes to read from the socket, per second.

LocalAddress
char*
Default Value: ""

The local network interface to bind the socket to.

LocalPort
int
Default Value: 0

The local port number to bind the socket to.

OutgoingSpeedLimit
int
Default Value: 0

The maximum number of bytes to write to the socket, per second.

Timeout
int
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

UseIPv6
int
Default Value: FALSE

Enables or disables IP protocol version 6.

Constructors

SocketSettings(int *lpSize = NULL)

Creates a new SocketSettings object.

TLSConnectionInfo Type

Contains information about a network connection.

Syntax

SecureBlackboxTLSConnectionInfo (declared in secureblackbox.h)

Remarks

Use this property to check various details of the network connection. These include the total amounts of data transferred, the availability of TLS, and its parameters.

Fields

AEADCipher
int (read-only)
Default Value: FALSE

Indicates whether the encryption algorithm used is an AEAD cipher.

ChainValidationDetails
int (read-only)
Default Value: 0

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

ChainValidationResult
int (read-only)
Default Value: 0

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

Ciphersuite
char* (read-only)
Default Value: ""

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

ClientAuthenticated
int (read-only)
Default Value: FALSE

Specifies whether client authentication was performed during this connection.

ClientAuthRequested
int (read-only)
Default Value: FALSE

Specifies whether client authentication was requested during this connection.

ConnectionEstablished
int (read-only)
Default Value: FALSE

Indicates whether the connection has been established fully.

ConnectionID
char* (read-only)
Default Value:

The unique identifier assigned to this connection.

DigestAlgorithm
char* (read-only)
Default Value: ""

The digest algorithm used in a TLS-enabled connection.

EncryptionAlgorithm
char* (read-only)
Default Value: ""

The symmetric encryption algorithm used in a TLS-enabled connection.

Exportable
int (read-only)
Default Value: FALSE

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

ID
int64 (read-only)
Default Value: -1

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

KeyExchangeAlgorithm
char* (read-only)
Default Value: ""

The key exchange algorithm used in a TLS-enabled connection.

KeyExchangeKeyBits
int (read-only)
Default Value: 0

The length of the key exchange key of a TLS-enabled connection.

NamedECCurve
char* (read-only)
Default Value: ""

The elliptic curve used in this connection.

PFSCipher
int (read-only)
Default Value: FALSE

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

PreSharedIdentity
char*
Default Value: ""

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedIdentityHint
char* (read-only)
Default Value: ""

A hint professed by the server to help the client select the PSK identity to use.

PublicKeyBits
int (read-only)
Default Value: 0

The length of the public key.

RemoteAddress
char* (read-only)
Default Value: ""

The client's IP address.

RemotePort
int (read-only)
Default Value: 0

The remote port of the client connection.

ResumedSession
int (read-only)
Default Value: FALSE

Indicates whether a TLS-enabled connection was spawned from another TLS connection

SecureConnection
int (read-only)
Default Value: FALSE

Indicates whether TLS or SSL is enabled for this connection.

ServerAuthenticated
int (read-only)
Default Value: FALSE

Indicates whether server authentication was performed during a TLS-enabled connection.

SignatureAlgorithm
char* (read-only)
Default Value: ""

The signature algorithm used in a TLS handshake.

SymmetricBlockSize
int (read-only)
Default Value: 0

The block size of the symmetric algorithm used.

SymmetricKeyBits
int (read-only)
Default Value: 0

The key length of the symmetric algorithm used.

TotalBytesReceived
int64 (read-only)
Default Value: 0

The total number of bytes received over this connection.

TotalBytesSent
int64 (read-only)
Default Value: 0

The total number of bytes sent over this connection.

ValidationLog
char* (read-only)
Default Value: ""

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

Version
char* (read-only)
Default Value: ""

Indicates the version of SSL/TLS protocol negotiated during this connection.

Constructors

TLSConnectionInfo(int *lpSize = NULL)

Creates a new TLSConnectionInfo object.

TLSSettings Type

A container for TLS connection settings.

Syntax

SecureBlackboxTLSSettings (declared in secureblackbox.h)

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

Fields

AutoValidateCertificates
int
Default Value: TRUE

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

BaseConfiguration
int
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

Ciphersuites
char*
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by . Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

ClientAuth
int
Default Value: 0

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

ECCurves
char*
Default Value: ""

Defines the elliptic curves to enable.

Extensions
char*
Default Value: ""

Provides access to TLS extensions.

ForceResumeIfDestinationChanges
int
Default Value: FALSE

Whether to force TLS session resumption when the destination address changes.

PreSharedIdentity
char*
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

PreSharedKey
char*
Default Value: ""

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

PreSharedKeyCiphersuite
char*
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

RenegotiationAttackPreventionMode
int
Default Value: 2

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

RevocationCheck
int
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	Check all provided CRL endpoints for all chain certificates.
crcAllOCSP	`3`	Check all provided OCSP endpoints for all chain certificates.
crcAllCRLAndOCSP	`4`	Check all CRL and OCSP endpoints for all chain certificates.
crcAnyCRL	`5`	At least one CRL check for every certificate in the chain must succeed.
crcAnyOCSP	`6`	At least one OCSP check for every certificate in the chain must succeed.
crcAnyCRLOrOCSP	`7`	At least one CRL or OCSP check for every certificate in the chain must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	At least one CRL or OCSP check for every certificate in the chain must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

SSLOptions
int
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

TLSMode
int
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

UseExtendedMasterSecret
int
Default Value: FALSE

Enables the Extended Master Secret Extension, as defined in RFC 7627.

UseSessionResumption
int
Default Value: FALSE

Enables or disables the TLS session resumption capability.

Versions
int
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

TLSSettings(int *lpSize = NULL)

Creates a new TLSSettings object.

UserAccount Type

A container for user account information.

Syntax

SecureBlackboxUserAccount (declared in secureblackbox.h)

Remarks

UserAccount objects are used to store user account information, such as logins and passwords.

Fields

AssociatedData
char*
Default Value:

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

BasePath
char*
Default Value: ""

Base path for this user in the server's file system.

Certificate
char*
Default Value:

Contains the user's certificate.

Data
char*
Default Value: ""

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Email
char*
Default Value: ""

The user's email address.

Handle
int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

HashAlgorithm
char*
Default Value: ""

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:


SB_MAC_ALGORITHM_HMAC_SHA1	`SHA1`
SB_MAC_ALGORITHM_HMAC_SHA256	`SHA256`
SB_MAC_ALGORITHM_HMAC_SHA512	`SHA512`

IncomingSpeedLimit
int
Default Value: 0

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

OtpAlgorithm
int
Default Value: 0

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP). In the former case, a value of a dedicated counter is used to generate a unique password, while in the latter the password is generated on the basis of the current time value.


oaHmac	`0`
oaTime	`1`

OTPLen
int
Default Value: 0

Specifies the length of the user's OTP password.

OtpValue
int
Default Value: 0

The user's time interval (TOTP) or Counter (HOTP).

OutgoingSpeedLimit
int
Default Value: 0

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

Password
char*
Default Value: ""

The user's authentication password.

SharedSecret
char*
Default Value:

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

SSHKey
char*
Default Value:

Contains the user's SSH key.

Username
char*
Default Value: ""

The registered name (login) of the user.

Constructors

UserAccount(int *lpSize = NULL)

Creates a new UserAccount object.

SecureBlackboxList Type

Syntax

SecureBlackboxList<T> (declared in secureblackbox.h)

Remarks

SecureBlackboxList is a generic class that is used to hold a collection of objects of type T, where T is one of the custom types supported by the TSPServer class.

Methods

GetCount	This method returns the current size of the collection. int GetCount() {}
SetCount	This method sets the size of the collection. This method returns `0` if setting the size was successful; or `-1` if the collection is `ReadOnly`. When adding additional objects to a collection call this method to specify the new size. Increasing the size of the collection preserves existing objects in the collection. int SetCount() {}
Get	This method gets the item at the specified position. The `index` parameter specifies the index of the item in the collection. This method returns `NULL` if an invalid `index` is specified. T* Get(int index) {}
Set	This method sets the item at the specified position. The `index` parameter specifies the index of the item in the collection that is being set. This method returns `-1` if an invalid `index` is specified. Note: Objects created using the `new` operator must be freed using the `delete` operator; they will not be automatically freed by the class. T* Set(int index, T* value) {}

Config Settings (TSPServer Class)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

TSPServer Config Settings

AllowOptionsResponseWithoutAuth: Enables unauthenticated responses to OPTIONS requests.

Set this property to true to allow the server serve OPTIONS requests without prior authentication of the client.

AuthDigestExpire: Specifies digest expiration time for digest authentication.

Use this property to specify the digest expiration time for digest authentication, in seconds. The default setting is 20.

ClientAuth: Enables or disables certificate-based client authentication.

Set this property to one of the below values to tune up the client authentication logic:


0		No client authentication (the default setting)
1		Request certificates. The server will ask connecting clients for their certificates. Non-authenticated client connections will be accepted anyway.
2		Require certificates. The server will ask connecting clients for their certificates. If a client fails to provide a certificate, the server will terminate the connection.

If this property is set to 1 or 2, the component will request certificates from the connecting clients. Depending on the setting, the clients that fail to provide their certificate in response will be allowed or disallowed to proceed with the connection. The server signals about a received certificate by firing its CertificateValidate event. Use PinClient method in the event handler to pin the client details, and access the provided certificate chain via the PinnedClientChain property.

Note that this event is fired from the connecting clients threads, so please make sure you avoid bottlenecks in the event handler and put appropriate thread safety measures in place.

Unlike the client-side components, the server component does not perform automated certificate validation against the local security policy. You must perform appropriate certificate validation steps in your CertificateValidate event handler.

DualStack: Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

HomePage: Specifies the home page resource name.

Use this property to specify the home page (/) resource name.

Host: The host to bind to.

Specifies a specific interface the server should listen on.

RequestFilter: The request string modifier.

Use this property to tune up the request string as returned by GetRequestString method. Supported filters: params (request parameters only), params[Index] or params['Name'] (a specific request parameter), parts[Index] (the contents of a particular part of a multipart message). An empty request filter makes GetRequestString return the whole body of the request.

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

WebsiteName: The website name for the TLS certificate.

Assign this property with a name to put in a self-generated TLS certificate.

Base Config Settings

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (TSPServer Class)

Error Handling (C++)

Call the GetLastErrorCode() method to obtain the last called method's result code; 0 indicates success, while a non-zero error code indicates that this method encountered an error during its execution. Known error codes are listed below. If an error occurs, the GetLastError() method can be called to retrieve the associated error message.

TSPServer Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)