JAdESSigner Component

Properties   Methods   Events   Config Settings   Errors  

The JAdESSigner component signs Javascript content electronically.

Syntax

nsoftware.SecureBlackbox.JAdESSigner

Remarks

JAdESSigner supports a range of digital signature formats over Javascript content, including JSON Web Signatures (JWS) and ETSI JSON Advanced Electronic Signatures (JAdES). JAdESSigner signer = new JAdESSigner(); signer.getNewSignature().setHashAlgorithm("SHA512"); // Default hashing algorithm SHA256 // Select the file which will be signed signer.setDataFile("MyExe.exe"); // Select the path where the signed file will be saved signer.setOutputFile("SignedFile.scs"); // Specify the certificate that shall be used for signing signer.setSigningCertificate(new Certificate("cert.pfx","password")); signer.getNewSignature().setLevel(JAdESSignature.jaslBaselineT); // Set the level of the signature // Provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature signer.setTimestampServer("http://freetsa.org/tsr"); signer.sign(); // Sign

Standards and technologies supported

JAdESSigner can create signatures that match the following standards:

  • Generic JSON Web Signatures (JWS) (RFC7515)
  • JAdES: all profiles are supported (BES, EPES, T, LTV, B-B, B-T, and others) (ETSI TS 119 182-1)
  • Timestamps using external TSAs.
  • All industry-standard cryptographic algorithms (RSA, ECDSA, SHA256-512, and many others).

Configuring the signature spec

JWS and JAdES signatures can come in all sorts of flavours, with the primary factors being the signature format (how exactly the signed data is represented in bytes) and completeness (the extent of the trust information that is included in the signature). You can use the properties of your JAdESSigner object to configure these and other parameters. Typically, the service or software that you need to communicate with will provide you with a list of requirements that your JSON signature needs to satisfy. In some cases, they will also send you an example signature that you may use as a guide.

Typically, you will need to adjust the following categories of settings:

The above are the most important settings from each category; you may need to adjust more specific settings, such as EPES policy parameters (such as PolicyID) or ContentType, to fine-tune your signature.

Signing certificates

JAdESSigner can use certificates residing on different media. Besides generic certificates stored in PFX or PEM files (A1), it can operate with non-exportable certificates residing on hardware media (A3), system stores/keychains, or in the cloud.

Non-exportable certificates can be accessed transparently via a Windows CSP or a PKCS#11 driver, if supplied by the certificate issuer. Proprietary or less interoperable media can be communicated with the external signing feature (see below).

Use CertificateManager and CertificateStorage components to load the signing certificate. Assign the certificate to SigningCertificate property, and optionally provide the remainder of its chain via the SigningChain property.

In the default configuration, JAdESSigner will do its best to collect the trust elements (certificates, CRLs, OCSP responses) required by the chosen signature level automatically. It will use all available sources, including the system stores, the chain validation cache, and the signature itself (when upgrading an existing signature). However, there can be situations where only some (or even none) of the trust elements are available in the public locations. This is particularly the case for internal, experimental, or test PKI environments. In such cases you might need to locate the missing elements manually and provide them to JAdESSigner via the KnownCertificates, KnownCRLs, and KnownOCSPs properties. You can also provide any trust anchors not included in the public Trusted Root directory via the TrustedCertificates collection.

Note: If signing with a non-exportable key (such as residing on a hardware device or in the cloud), please make sure you keep the original CertificateStorage object open until the signing is completed. This is because the storage component provides a 'bridge' to the private key. If the storage is closed prematurely, this bridge is destroyed, and the private key can't be used.

Signing the JSON

Now that you have configured the signature and certificate settings, you can proceed to signing. You can provide the JSON input in one of the following forms: as a file (assign the path to InputFile property), as a stream (assign to InputStream property), as a string (InputString), or as a byte array (assign to InputBytes). Similarly, the output can be collected in one of the same forms, either by passing the destination path or stream via OutputFile and OutputStream respectively, or by reading the resulting document bytes from the OutputBytes or OutputString property after the signing.

Having set up the input and output, call the component's Sign method. This will initiate the signing process. Depending on the settings, the signing may be as straightforward as calculating the document hash and signing it with the private key (e.g. when creating a B-level signature), or it may involve advanced chain validation routines (LT or LTA). During the latter the component contacts a number of external trust information sources (CA, CRL, and OCSP servers) to establish the validity of the signing certificate.

If a TSA server was provided via the TimestampServer property, the component will contact it too to timestamp the new signature.

During the signing JAdESSigner may fire events to let your code know of certain conditions. It may fire TLSCertValidate if one of the HTTP endpoints involved during the operation (which may be a CRL, OCSP, or TSA service) works over TLS and needs its certificate chain to be validated.

External signing and DCAuth

JAdESSigner, like many other components included in the product, supports two methods of signing with external keys. These methods are fully independent of each other: you can choose the one that suits your scenario best.

Synchronous method: ExternalSign

This is a simpler method that basically lets you infiltrate into the signing routine by taking care of the hash signing operation. The component does the rest of the job (hash calculation, preparation of signature objects, CRL/OCSP retrieval).

To initiate this method, call SignExternal instead of Sign. When the hash is ready, it will be passed back to your code with ExternalSign event. Your event handler needs to sign the hash with the private key and return the created signature back to the component - which will embed it into the document.

You don't need your signing certificate to contain an associated private key when using this method. The certificate itself (its public copy) may be needed though, as it is included in the hash calculation.

This method is synchronous, meaning SignExternal provides you the results immediately upon its completion.

Asynchronous method: DCAuth

DCAuth is a SecureBlackbox know-how technology. This protocol was designed to allow sharing of private keys across environments, allowing the signer and the private key to reside on different systems. It works in the following way:

  • The signing party - such as JAdESSigner - initiates the operation using SignAsyncBegin call. This produces two outcomes: a pre-signed content (a JSON body with a blank signature placeholder), and a request state (an object containing a hash that needs to be signed). At this point the JAdESSigner instance can be released, and the process itself terminated (which may be useful when run as part of a web page).
  • The request state is passed to the private key holder party. The private key holder passes the request state to a DCAuth object, which parses the request state, extracts the hash, and signs it. The output of DCAuth processing is another object, response state, which contains the signature. The private key holder then sends the response state back to the signing party.
  • The signing party re-creates the signing controls, and passes the response state, together with the pre-signed content, to the signer's SignAsyncEnd method. SignAsyncEnd extracts the signature from the response state and incorporates it into the pre-signed object, hereby completing the signature.

This method is asynchronous in that sense that, from the signing party's viewpoint, it splits the signing operation into the pre-signing and completion stages which can be performed independently from each other and in different execution contexts. This makes this method particularly helpful for use in web pages and other scenarios where the signing key is not available in real time.

Fine-grained chain validation setup

Chain validation is a sophisticated, multi-faceted procedure that involves a lot of variables. Depending on the configuration of your operating environment, the specifics of the PKI framework being used, and the validation policy you need to follow, you may want to tune up your chain validation parameters so they fit them best. A summary of such parameters is given below.

  • RevocationCheck lets you choose between and/or prioritize revocation origins. OCSP sources are often preferred to CRL because of their real-time capability and the smaller size of validation tokens they produce.
  • OfflineMode is a master switch that stops the component from looking for any validation tokens online. If this property is switched on, the component will only use the KnownCertificates, TrustedCertificates, KnownCRLs, and KnownOCSPs collections to look for the missing validation material.
  • IgnoreChainValidationErrors makes the component ignore any major validation issues it encounters (such us an untrusted chain or missing CRL). This option is handy for debugging and for creating signatures in the environments where the signing certificate is not trusted.
  • KnownCertificates, KnownCRLs, and KnownOCSPs let you provide your own validation material. This may be useful when working in OfflineMode, where the signer has no access to the validation sources, or where the validation material has already been collected.
  • TrustedCertificates lets you provide a list of trust anchors, either as a complement to the system's or as an alternative to it.
  • BlockedCertificates lets you provide a list of blocked/distrusted certificates. Any CA certificate contained in it will be deemed untrusted/invalid.

The following parameters are not directly related to chain validation, but may have an implicit effect on it.

  • Proxy, SocketSettings, and TLSSettings let you tune up the connectivity and TLS options in accordance with local preferences.
  • TLSClientChain lets you provide the client certificate and its chain for TLS client authentication.
  • Subscribe to TLSCertValidate to validate any TLS certificates of the services involved in chain validation.

The results of the chain validation procedure, upon its completion, are published in the following properties:

  • ChainValidationResult contains the primary result of the chain validation routine: valid, valid but untrusted, invalid, or undefined.
  • ChainValidationDetails provides the details of the factors that contributed to the chain validation result, such as an outdated certificate, a missing CRL, or a missing CA certificate.
  • ValidationLog contains the detailed chain validation log. The log can often be very helpful in nailing down various validation issues.

Property List


The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

AutoValidateSignaturesSpecifies whether component should validate any present signatures when the JSON opened.
BlockedCertificatesThe certificates that must be rejected as trust anchors.
CertificatesA collection of certificates included in the electronic signature.
CheckTrustedListsSpecifies whether the component should attempt to validate chain trust via a known Trusted List.
CompactFormSpecifies if the JWS compact serialization to be used.
ContentTypeSpecifies payload content type.
CRLsA collection of certificate revocation lists embedded into the signature by the signer.
DataBytesUse this property to pass a payload or an object data to component in the byte array form.
DataFileA path to a file containing a payload or an object data.
DataStreamA stream containing a payload or an object data.
DataStringUse this property to pass a payload or an object data to component in the string form.
DetachedSpecifies whether a detached signature should be produced or verified.
ExternalCryptoProvides access to external signing and DC parameters.
ExtractPayloadSpecifies whether a payload should be extracted.
FIPSModeReserved.
FlattenedSignatureSpecifies if the flattened signature to be used.
IgnoreChainValidationErrorsMakes the component tolerant to chain validation errors.
InputBytesUse this property to pass the input to component in byte array form.
InputFileThe file to be signed.
InputStreamStream containing the JWS/JAdES signature.
InputStringUse this property to pass the input to component in the string form.
KnownCertificatesAdditional certificates for chain validation.
KnownCRLsAdditional CRLs for chain validation.
KnownOCSPsAdditional OCSP responses for chain validation.
NewSignatureProvides access to new signature properties.
OCSPsA collection of OCSP responses embedded into the signature.
OfflineModeSwitches the component to offline mode.
OutputBytesUse this property to read the output the component object has produced.
OutputFileDefines where to save the signature.
OutputStreamThe stream where the signature would be saved.
OutputStringUse this property to read the output the component object has produced.
ProfileSpecifies a pre-defined profile to apply when creating the signature.
ProxyThe proxy server settings.
RevocationCheckSpecifies the kind(s) of revocation check to perform for all chain certificates.
SignaturesProvides details of all signatures found in the JWS/JAdES signature.
SigningCertificateThe certificate to be used for signing.
SigningChainThe signing certificate chain.
SocketSettingsManages network connection settings.
TimestampsContains a collection of timestamps for the processed document.
TimestampServerThe address of the timestamping server.
TLSClientChainThe TLS client certificate chain.
TLSServerChainThe TLS server's certificate chain.
TLSSettingsManages TLS layer settings.
TrustedCertificatesA list of trusted certificates for chain validation.
ValidationMomentThe time point at which signature validity is to be established.

Method List


The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

AddSignedHTTPHeaderFieldUse this method to add HTTP header field.
AddSignedObjectUse this method to add an object.
AddSignedObjectHashUse this method to add an object hash.
CloseCloses an opened JWS/JAdES signature.
ConfigSets or retrieves a configuration setting.
CreateNewCreate a new JSON for signing.
DoActionPerforms an additional action.
ExtractAsyncDataExtracts user data from the DC signing service response.
OpenOpens a JSON for signing or updating.
ResetResets the component settings.
RevalidateRevalidates a signature in accordance with current settings.
SelectInfoSelect signature information for a specific entity.
SignCreates a new JAdES/JWS signature over the provided data.
SignAsyncBeginInitiates the asynchronous signing operation.
SignAsyncEndCompletes the asynchronous signing operation.
SignExternalSigns the data using an external signing facility.
TimestampUse this method to add timestamp.
UpgradeUpgrades existing JAdES signature to a new level.

Event List


The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

ChainElementDownloadFires when there is a need to download a chain element from an online source.
ChainElementNeededFires when an element required to validate the chain was not located.
ChainElementStoreThis event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.
ChainValidatedReports the completion of a certificate chain validation.
ChainValidationProgressThis event is fired multiple times during chain validation to report various stages of the validation procedure.
ErrorInformation about errors during signing.
ExternalSignHandles remote or external signing initiated by the SignExternal method or other source.
HTTPHeaderFieldNeededThis event is fired when HTTP header field value is required.
LoadedThis event is fired when the JSON has been loaded into memory.
NotificationThis event notifies the application about an underlying control flow event.
ObjectNeededThis event is fired when object is required.
ObjectValidateThis event is fired when object should be verified by user.
SignatureFoundSignifies the start of signature validation.
SignatureValidatedMarks the completion of the signature validation routine.
TimestampFoundSignifies the start of a timestamp validation routine.
TimestampRequestFires when the component is ready to request a timestamp from an external TSA.
TimestampValidatedReports the completion of the timestamp validation routine.
TLSCertNeededFires when a remote TLS party requests a client certificate.
TLSCertValidateThis event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
TLSEstablishedFires when a TLS handshake with Host successfully completes.
TLSHandshakeFires when a new TLS handshake is initiated, before the handshake commences.
TLSShutdownReports the graceful closure of a TLS connection.

Config Settings


The following is a list of config settings for the component with short descriptions. Click on the links for further details.

AddSignedDataTimestampWhether to add signed data timestamp during signing.
AsyncDocumentIDSpecifies the document ID for SignAsyncEnd() call.
CertThumbprintSpecifies the certificate thumbprint.
CertURLSpecifies the certificate URL.
ChainCurrentCACertReturns the current CA certificate.
ChainCurrentCertReturns the certificate that is currently being validated.
ChainCurrentCRLReturns the current CRL.
ChainCurrentCRLSizeReturns the size of the current CRL.
ChainCurrentOCSPReturns the current OCSP response.
ChainCurrentOCSPSignerReturns the signer of the current OCSP object.
ChainInterimDetailsReturns the current interim validation details.
ChainInterimResultReturns the current interim validation result.
CheckValidityPeriodForTrustedWhether to check validity period for trusted certificates.
CustomTrustedListsSpecifies the custom TrustedLists.
CustomTSLsSpecifies the custom TrustedLists.
DataBase64Specifies whether data is Base64-URL-encoded.
DislikeOpenEndedOCSPsTells the component to discourage OCSP responses without an explicit NextUpdate parameter.
ForceCompleteChainValidationWhether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrustedWhether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriodSpecifies a grace period to apply during revocation information checks.
IgnoreChainLoopsWhether chain loops should be ignored.
IgnoreChainValidationErrorsWhether to ignore any certificate chain validation issues.
IgnoreOCSPNoCheckExtensionWhether the OCSP NoCheck extension should be ignored.
IgnoreSystemTrustWhether trusted Windows Certificate Stores should be treated as trusted.
IgnoreTimestampFailureWhether to ignore time-stamping failure during signing.
ImplicitlyTrustSelfSignedCertificatesWhether to trust self-signed certificates.
IncludeKnownRevocationInfoToSignatureWhether to include custom revocation info to the signature.
JAdESOptionsSpecifies the JAdES options.
KeyIdSpecifies Key ID.
PolicyDescriptionsignature policy description.
PolicyExplicitTextThe explicit text of the user notice.
PolicyUNNumbersThe noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganizationThe organization part of the NoticeReference qualifier.
ProductionPlaceIdentifies the place of the signature production.
PromoteLongOCSPResponsesWhether long OCSP responses are requested.
ProtectedHeaderSpecifies the protected header.
PSSUsedWhether to use RSASSA-PSS algorithm.
SchemeParamsThe algorithm scheme parameters to employ.
SignerAttrsIdentifies the signer attributes.
SignerCommitmentsIdentifies the signer commitments.
SigningCertIncludeIssuerSerialSpecifies whether to include signing certificate issuer and serial number.
SigningCertIncludeThumbprintSpecifies whether to include signing certificate thumbprint.
SigningCertIncludeValueSpecifies whether to include signing certificate value.
SigningChainIncludeThumbprintsSpecifies whether to include signing chain thumbprints.
SigningChainIncludeValueSpecifies whether to include signing chain values.
SigPolicyDescriptionsignature policy description.
SigPolicyExplicitTextThe explicit text of the user notice.
SigPolicyHashThe EPES policy hash.
SigPolicyHashAlgorithmThe hash algorithm that was used to generate the EPES policy hash.
SigPolicyIDThe EPES policy ID.
SigPolicyNoticeNumbersThe noticeNumbers part of the NoticeReference CAdES attribute.
SigPolicyNoticeOrganizationThe organization part of the NoticeReference qualifier.
SigPolicyURIThe EPES policy URI.
TempPathPath for storing temporary files.
ThumbprintHashAlgorithmSpecifies the thumbprint hash algorithm.
TimestampResponseA base16-encoded timestamp response received from a TSA.
TimestampValidationDataDetailsSpecifies timestamp validation data details to include to the signature.
TLSChainValidationDetailsContains the advanced details of the TLS server certificate validation.
TLSChainValidationResultContains the result of the TLS server certificate validation.
TLSClientAuthRequestedIndicates whether the TLS server requests client authentication.
TLSValidationLogContains the log of the TLS server certificate validation.
TolerateMinorChainIssuesWhether to tolerate minor chain issues.
TspAttemptCountSpecifies the number of timestamping request attempts.
TspHashAlgorithmSets a specific hash algorithm for use with the timestamping service.
TspReqPolicySets a request policy ID to include in the timestamping request.
UnprotectedHeaderSpecifies the unprotected header.
UseDefaultTrustedListsEnables or disables the use of the default TrustedLists.
UseDefaultTSLsEnables or disables the use of the default TrustedLists.
UseMicrosoftCTLEnables or disables the automatic use of the Microsoft online certificate trust list.
UsePSSWhether to use RSASSA-PSS algorithm.
UseSystemCertificatesEnables or disables the use of the system certificates.
UseValidationCacheEnables or disable the use of the product-wide certificate chain validation cache.
UseValidatorSettingsForTLSValidationWhether to employ the primary chain validator setup for auxiliary TLS chain validations.
ValidationDataRefsDetailsSpecifies validation data references details to include to the signature.
ValidationDataRefsHashAlgorithmSpecifies the hash algorithm used in validation data references.
ValidationDataValuesDetailsSpecifies validation data values details to include to the signature.
ASN1UseGlobalTagCacheControls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPinsSpecifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the component.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
DNSLocalSuffixThe suffix to assign for TLD names.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicyThe hardware crypto usage policy.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
HttpVersionThe HTTP version to use in any inner HTTP client components created.
IgnoreExpiredMSCTLSigningCertWhether to tolerate the expired Windows Update signing certificate.
ListDelimiterThe delimiter character for multi-element lists.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallbackSpecifies whether the SSH client should use a SHA1 fallback.
ProductVersionReturns the version of the SecureBlackbox library.
ServerSSLDHKeyLengthSets the size of the TLS DHE key exchange group.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseInternalRandomSwitches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidationEnables legacy AdES validation mode.
UseOwnDNSResolverSpecifies whether the client components should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculationAn internal CryptoAPI access tweak.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

AutoValidateSignatures Property (JAdESSigner Component)

Specifies whether component should validate any present signatures when the JSON opened.

Syntax

public bool AutoValidateSignatures { get; set; }
Public Property AutoValidateSignatures As Boolean

Default Value

False

Remarks

This setting is switched off by default to speed up JSON processing. Even if the JWS/JAdES signature is loaded with this property set to false, you can validate the signatures manually on a later stage using the Revalidate method.

BlockedCertificates Property (JAdESSigner Component)

The certificates that must be rejected as trust anchors.

Syntax

public CertificateList BlockedCertificates { get; }
Public Property BlockedCertificates As CertificateList

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

Certificates Property (JAdESSigner Component)

A collection of certificates included in the electronic signature.

Syntax

public CertificateList Certificates { get; }
Public ReadOnly Property Certificates As CertificateList

Remarks

This property includes a collection of certificates of the currently selected info.

This collection is indexed from 0 to count -1.

This property is read-only and not available at design time.

Please refer to the Certificate type for a complete list of fields.

CheckTrustedLists Property (JAdESSigner Component)

Specifies whether the component should attempt to validate chain trust via a known Trusted List.

Syntax

public bool CheckTrustedLists { get; set; }
Public Property CheckTrustedLists As Boolean

Default Value

False

Remarks

Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).

CompactForm Property (JAdESSigner Component)

Specifies if the JWS compact serialization to be used.

Syntax

public bool CompactForm { get; set; }
Public Property CompactForm As Boolean

Default Value

False

Remarks

When this property is set to "true" value, the JAdES component will use the JWS compact serialization format when saving a signature.

The JWS compact serialization format is a compact, Url safe representation of a JWS (JSON Web Signature) or JWE (JSON Web Encryption) object, used for transmitting security tokens.

The JWS compact serialization format supports only one signature without unprotected header (only JWS or JAdES BaselineB signature).

ContentType Property (JAdESSigner Component)

Specifies payload content type.

Syntax

public string ContentType { get; set; }
Public Property ContentType As String

Default Value

""

Remarks

Use this property to indicate the content type of the JWS Payload.

This property provides a way for the application to disambiguate among different kinds of objects that might be present in the payload, but it is typically not used when the kind of object is already known. The value of this property is a string that conforms to the Internet Media Type (MIME) format, such as "text/plain" or "application/json".

It is optional to use this property and it is recommended to omit the "application/" prefix of the media type value when it is not needed. The recipient of the signed message should treat the value as if "application/" were prepended to it, unless it already contains a '/'.

CRLs Property (JAdESSigner Component)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax

public CRLList CRLs { get; }
Public ReadOnly Property CRLs As CRLList

Remarks

Use this property to access the CRLs embedded into the signature by the signer.

This property is read-only and not available at design time.

Please refer to the CRL type for a complete list of fields.

DataBytes Property (JAdESSigner Component)

Use this property to pass a payload or an object data to component in the byte array form.

Syntax

public byte[] DataBytes { get; set; }
Public Property DataBytes As Byte()

Remarks

Assign a byte array containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

DataFile Property (JAdESSigner Component)

A path to a file containing a payload or an object data.

Syntax

public string DataFile { get; set; }
Public Property DataFile As String

Default Value

""

Remarks

Use this property to provide a JWS payload or an object data to be processed.

DataStream Property (JAdESSigner Component)

A stream containing a payload or an object data.

Syntax

public System.IO.Stream DataStream { get; set; }
Public Property DataStream As System.IO.Stream

Default Value

null

Remarks

Use this property to provide a JWS payload or an object data to be processed.

This property is not available at design time.

DataString Property (JAdESSigner Component)

Use this property to pass a payload or an object data to component in the string form.

Syntax

public string DataString { get; set; }
Public Property DataString As String

Default Value

""

Remarks

Assign a string containing a JWS payload or an object data to be processed to this property.

This property is not available at design time.

Detached Property (JAdESSigner Component)

Specifies whether a detached signature should be produced or verified.

Syntax

public bool Detached { get; set; }
Public Property Detached As Boolean

Default Value

False

Remarks

Use this property to specify whether a detached signature should be produced or verified.

When this property is set to "true" value, the JWS payload will be detached from the signature and may either be a single detached object or the result of concatenating multiple detached data objects. In other words, the JWS payload and the signature are stored in separate objects.

If this property is set to "true" value, the user must provide the detached content via the DataFile or DataStream or DataBytes or DataString properties.

When Detached is set to "false" value, the JWS payload is included with the signature as a single object.

ExternalCrypto Property (JAdESSigner Component)

Provides access to external signing and DC parameters.

Syntax

public ExternalCrypto ExternalCrypto { get; }
Public ReadOnly Property ExternalCrypto As ExternalCrypto

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

This property is read-only.

Please refer to the ExternalCrypto type for a complete list of fields.

ExtractPayload Property (JAdESSigner Component)

Specifies whether a payload should be extracted.

Syntax

public bool ExtractPayload { get; set; }
Public Property ExtractPayload As Boolean

Default Value

False

Remarks

Use this property to specify whether a payload should be extracted when signature loaded. This applies only to non-detached signatures with a payload.

When this property is set to "true" value, the JWS payload will be extracted from the signature.

The user must provide the OutputFile or OutputStream properties with a filename or stream where to save the payload, if none is provided then payload is returned via OutputBytes or OutputString properties.

FIPSMode Property (JAdESSigner Component)

Reserved.

Syntax

public bool FIPSMode { get; set; }
Public Property FIPSMode As Boolean

Default Value

False

Remarks

This property is reserved for future use.

FlattenedSignature Property (JAdESSigner Component)

Specifies if the flattened signature to be used.

Syntax

public bool FlattenedSignature { get; set; }
Public Property FlattenedSignature As Boolean

Default Value

True

Remarks

This property determines whether to use the flattened JWS JSON serialization format. This format is optimized for the single digital signature case and flattens the general JWS JSON serialization syntax by removing the "signatures" member and instead placing the "protected", "header", and "signature" members at the top-level JSON object (at the same level as the "payload" member).

When the FlattenedSignature property is set to "true" value, the signature will be represented using the flattened JWS JSON serialization format, but it is only applicable when there is a single signature involved.

When the property is set to "false" value, the signature will be represented using the general JWS JSON serialization format.

IgnoreChainValidationErrors Property (JAdESSigner Component)

Makes the component tolerant to chain validation errors.

Syntax

public bool IgnoreChainValidationErrors { get; set; }
Public Property IgnoreChainValidationErrors As Boolean

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (JAdESSigner Component)

Use this property to pass the input to component in byte array form.

Syntax

public byte[] InputBytes { get; set; }
Public Property InputBytes As Byte()

Remarks

Assign a byte array containing the data to be processed to this property.

This property is not available at design time.

InputFile Property (JAdESSigner Component)

The file to be signed.

Syntax

public string InputFile { get; set; }
Public Property InputFile As String

Default Value

""

Remarks

Provide the path to the JSON to be signed.

InputStream Property (JAdESSigner Component)

Stream containing the JWS/JAdES signature.

Syntax

public System.IO.Stream InputStream { get; set; }
Public Property InputStream As System.IO.Stream

Default Value

null

Remarks

Use this property to feed the JWS/JAdES signature to the component via a stream.

This property is not available at design time.

InputString Property (JAdESSigner Component)

Use this property to pass the input to component in the string form.

Syntax

public string InputString { get; set; }
Public Property InputString As String

Default Value

""

Remarks

Assign a string containing the data to be processed to this property.

This property is not available at design time.

KnownCertificates Property (JAdESSigner Component)

Additional certificates for chain validation.

Syntax

public CertificateList KnownCertificates { get; }
Public Property KnownCertificates As CertificateList

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

KnownCRLs Property (JAdESSigner Component)

Additional CRLs for chain validation.

Syntax

public CRLList KnownCRLs { get; }
Public Property KnownCRLs As CRLList

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

This property is not available at design time.

Please refer to the CRL type for a complete list of fields.

KnownOCSPs Property (JAdESSigner Component)

Additional OCSP responses for chain validation.

Syntax

public OCSPResponseList KnownOCSPs { get; }
Public Property KnownOCSPs As OCSPResponseList

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

This property is not available at design time.

Please refer to the OCSPResponse type for a complete list of fields.

NewSignature Property (JAdESSigner Component)

Provides access to new signature properties.

Syntax

public JAdESSignature NewSignature { get; }
Public ReadOnly Property NewSignature As JAdESSignature

Remarks

Use this property to tune-up signature properties.

This property is read-only and not available at design time.

Please refer to the JAdESSignature type for a complete list of fields.

OCSPs Property (JAdESSigner Component)

A collection of OCSP responses embedded into the signature.

Syntax

public OCSPResponseList OCSPs { get; }
Public ReadOnly Property OCSPs As OCSPResponseList

Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

This property is read-only and not available at design time.

Please refer to the OCSPResponse type for a complete list of fields.

OfflineMode Property (JAdESSigner Component)

Switches the component to offline mode.

Syntax

public bool OfflineMode { get; set; }
Public Property OfflineMode As Boolean

Default Value

False

Remarks

When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (JAdESSigner Component)

Use this property to read the output the component object has produced.

Syntax

public byte[] OutputBytes { get; }
Public ReadOnly Property OutputBytes As Byte()

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

OutputFile Property (JAdESSigner Component)

Defines where to save the signature.

Syntax

public string OutputFile { get; set; }
Public Property OutputFile As String

Default Value

""

Remarks

Specifies the path where the JWS/JAdES signature should be saved.

OutputStream Property (JAdESSigner Component)

The stream where the signature would be saved.

Syntax

public System.IO.Stream OutputStream { get; set; }
Public Property OutputStream As System.IO.Stream

Default Value

null

Remarks

Use this property to save the JWS/JAdES signature to the stream.

This property is not available at design time.

OutputString Property (JAdESSigner Component)

Use this property to read the output the component object has produced.

Syntax

public string OutputString { get; }
Public ReadOnly Property OutputString As String

Default Value

""

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only and not available at design time.

Profile Property (JAdESSigner Component)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

public string Profile { get; set; }
Public Property Profile As String

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (JAdESSigner Component)

The proxy server settings.

Syntax

public ProxySettings Proxy { get; }
Public ReadOnly Property Proxy As ProxySettings

Remarks

Use this property to tune up the proxy server settings.

This property is read-only.

Please refer to the ProxySettings type for a complete list of fields.

RevocationCheck Property (JAdESSigner Component)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

public JAdESSignerRevocationChecks RevocationCheck { get; set; }

enum JAdESSignerRevocationChecks { crcNone, crcAuto, crcAllCRL, crcAllOCSP, crcAllCRLAndOCSP, crcAnyCRL, crcAnyOCSP, crcAnyCRLOrOCSP, crcAnyOCSPOrCRL }
Public Property RevocationCheck As JadessignerRevocationChecks

Enum JAdESSignerRevocationChecks crcNone crcAuto crcAllCRL crcAllOCSP crcAllCRLAndOCSP crcAnyCRL crcAnyOCSP crcAnyCRLOrOCSP crcAnyOCSPOrCRL End Enum

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Signatures Property (JAdESSigner Component)

Provides details of all signatures found in the JWS/JAdES signature.

Syntax

public JAdESSignatureList Signatures { get; }
Public ReadOnly Property Signatures As JAdESSignatureList

Remarks

Use this property to get the details of all the signatures identified in the JWS/JAdES signature.

This property is read-only and not available at design time.

Please refer to the JAdESSignature type for a complete list of fields.

SigningCertificate Property (JAdESSigner Component)

The certificate to be used for signing.

Syntax

public Certificate SigningCertificate { get; set; }
Public Property SigningCertificate As Certificate

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

SigningChain Property (JAdESSigner Component)

The signing certificate chain.

Syntax

public CertificateList SigningChain { get; }
Public Property SigningChain As CertificateList

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

SocketSettings Property (JAdESSigner Component)

Manages network connection settings.

Syntax

public SocketSettings SocketSettings { get; }
Public ReadOnly Property SocketSettings As SocketSettings

Remarks

Use this property to tune up network connection parameters.

This property is read-only.

Please refer to the SocketSettings type for a complete list of fields.

Timestamps Property (JAdESSigner Component)

Contains a collection of timestamps for the processed document.

Syntax

public TimestampInfoList Timestamps { get; }
Public ReadOnly Property Timestamps As TimestampInfoList

Remarks

Use this property to access the timestamps included in the processed document.

This property is read-only and not available at design time.

Please refer to the TimestampInfo type for a complete list of fields.

TimestampServer Property (JAdESSigner Component)

The address of the timestamping server.

Syntax

public string TimestampServer { get; set; }
Public Property TimestampServer As String

Default Value

""

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256&ignorenonce=true

Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

The ignorenonce parameter allows you to switch off client nonce verification to enable compatibility with TSA services that do not support nonce mirroring.

All the parameters are optional.

TLSClientChain Property (JAdESSigner Component)

The TLS client certificate chain.

Syntax

public CertificateList TLSClientChain { get; }
Public Property TLSClientChain As CertificateList

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the component. Note that the client's end-entity certificate should have a private key associated with it.

Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

TLSServerChain Property (JAdESSigner Component)

The TLS server's certificate chain.

Syntax

public CertificateList TLSServerChain { get; }
Public ReadOnly Property TLSServerChain As CertificateList

Remarks

Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.

This property is read-only and not available at design time.

Please refer to the Certificate type for a complete list of fields.

TLSSettings Property (JAdESSigner Component)

Manages TLS layer settings.

Syntax

public TLSSettings TLSSettings { get; }
Public ReadOnly Property TLSSettings As TLSSettings

Remarks

Use this property to tune up the TLS layer parameters.

This property is read-only.

Please refer to the TLSSettings type for a complete list of fields.

TrustedCertificates Property (JAdESSigner Component)

A list of trusted certificates for chain validation.

Syntax

public CertificateList TrustedCertificates { get; }
Public Property TrustedCertificates As CertificateList

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

This property is not available at design time.

Please refer to the Certificate type for a complete list of fields.

ValidationMoment Property (JAdESSigner Component)

The time point at which signature validity is to be established.

Syntax

public string ValidationMoment { get; set; }
Public Property ValidationMoment As String

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

AddSignedHTTPHeaderField Method (JAdESSigner Component)

Use this method to add HTTP header field.

Syntax

public void AddSignedHTTPHeaderField(string fieldName);
Public Sub AddSignedHTTPHeaderField(ByVal FieldName As String)

Remarks

This method allows you to add HTTP header field to the list of fields that will be signed. The method takes one parameter: the name of the header field.

This method changes the type of signed data to HttpHeaders mechanism and triggers the HTTPHeaderFieldNeeded event when the value of the HTTP header field is needed.

Use "(request target)" value as a field name to add request method and target URI into the list of fields that will be signed.

AddSignedObject Method (JAdESSigner Component)

Use this method to add an object.

Syntax

public void AddSignedObject(string URI, string contentType);
Public Sub AddSignedObject(ByVal URI As String, ByVal ContentType As String)

Remarks

This method allows you to add an object to the list of objects that will be signed. The signed object is identified by its URI.

This method changes the type of signed data to ObjectByURI mechanism and triggers the ObjectNeeded event when the data of the object is needed.

AddSignedObjectHash Method (JAdESSigner Component)

Use this method to add an object hash.

Syntax

public void AddSignedObjectHash(string URI, string contentType, byte[] hash);
Public Sub AddSignedObjectHash(ByVal URI As String, ByVal ContentType As String, ByVal Hash As Byte())

Remarks

This method allows you to add an object hash to the list of objects that will be signed. The signed object is identified by its URI.

This method changes the type of signed data to ObjectByURIHash mechanism and triggers the ObjectValidate event when the object must be validated. Also, it triggers the ObjectNeeded event when the data of the object is needed this could occur while adding/validating SignedData or Archive timestamps.

Close Method (JAdESSigner Component)

Closes an opened JWS/JAdES signature.

Syntax

public void Close(bool saveChanges);
Public Sub Close(ByVal SaveChanges As Boolean)

Remarks

Use this method to close a previously opened JWS/JAdES signature. Set SaveChanges to true to apply any changes made.

Config Method (JAdESSigner Component)

Sets or retrieves a configuration setting.

Syntax

public string Config(string configurationString);
Public Function Config(ByVal ConfigurationString As String) As String

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateNew Method (JAdESSigner Component)

Create a new JSON for signing.

Syntax

public void CreateNew();
Public Sub CreateNew()

Remarks

Use this method to create a new JSON for signing. When finished, call Close to complete or discard the operation.

DoAction Method (JAdESSigner Component)

Performs an additional action.

Syntax

public string DoAction(string actionID, string actionParams);
Public Function DoAction(ByVal ActionID As String, ByVal ActionParams As String) As String

Remarks

DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (JAdESSigner Component)

Extracts user data from the DC signing service response.

Syntax

public string ExtractAsyncData(string asyncReply);
Public Function ExtractAsyncData(ByVal AsyncReply As String) As String

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

Open Method (JAdESSigner Component)

Opens a JSON for signing or updating.

Syntax

public void Open();
Public Sub Open()

Remarks

Use this method to open a JSON for signing or updating. When finished, call Close to complete or discard the operation.

Reset Method (JAdESSigner Component)

Resets the component settings.

Syntax

public void Reset();
Public Sub Reset()

Remarks

Reset is a generic method available in every component.

Revalidate Method (JAdESSigner Component)

Revalidates a signature in accordance with current settings.

Syntax

public void Revalidate(string sigLabel);
Public Sub Revalidate(ByVal SigLabel As String)

Remarks

Use this method to re-validate a signature in the opened JWS/JAdES signature.

SelectInfo Method (JAdESSigner Component)

Select signature information for a specific entity.

Syntax

public void SelectInfo(string entityLabel, int infoType, bool clearSelection);
Public Sub SelectInfo(ByVal EntityLabel As String, ByVal InfoType As Integer, ByVal ClearSelection As Boolean)

Remarks

Use this method to select (or filter) signature-related information for a specific signature element.

Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:

sitEntity1Select the current entity

sitParentEntity2Select the parent entity of the current entity

sitTimestamps4Select all timestamps covering the current entity

sitSignatures8Select all signatures covering the current entity

sitSigningChain16Select the signing chain of the current entity

sitEmbeddedCertificates256Select all certificates embedded in the current entity

sitEmbeddedCRLs512Select all CRLs embedded in the current entity

sitEmbeddedOCSPs1024Select all OCSP responses embedded in the current entity

sitEmbeddedRevInfo1792Select the whole pack of embedded revocation information (certificates, CRLs and OCSPs)

sitUsedCertificates4096Select all the certificates used to validate this entity's chain

sitUsedCRLs8192Select all the CRLs used to validate this entity's chain

sitUsedOCSPs16384Select all the OCSP responses used to validate this entity's chain

sitUsedRevInfo28672Select the whole pack of revocation information used to validate this entity's chain (certificates, CRLs, OCSP responses)

sitAttributes65536Select this entity's CMS attributes

sitReferences131072Select this entity's XML references

sitSignedParts262144Select this entity's signed parts

Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to SelectInfo and keeping ClearSelection set to false.

This method is useful if you would like to read/display detailed information about a particular signature or timestamp.

Sign Method (JAdESSigner Component)

Creates a new JAdES/JWS signature over the provided data.

Syntax

public void Sign();
Public Sub Sign()

Remarks

Call this method to produce a new signature over the provided data.

SignAsyncBegin Method (JAdESSigner Component)

Initiates the asynchronous signing operation.

Syntax

public string SignAsyncBegin();
Public Function SignAsyncBegin() As String

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (JAdESSigner Component)

Completes the asynchronous signing operation.

Syntax

public void SignAsyncEnd(string asyncReply);
Public Sub SignAsyncEnd(ByVal AsyncReply As String)

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth component), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignExternal Method (JAdESSigner Component)

Signs the data using an external signing facility.

Syntax

public void SignExternal();
Public Sub SignExternal()

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the component fires ExternalSign event which allows to pass the hash value for signing.

Timestamp Method (JAdESSigner Component)

Use this method to add timestamp.

Syntax

public void Timestamp(string sigLabel, int timestampType);
Public Sub Timestamp(ByVal SigLabel As String, ByVal TimestampType As Integer)

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:

tstSignature12Signature timestamp
tstRefsOnly13RefsOnly timestamp
tstSigAndRefs14SigAndRefs timestamp
tstArchive7Archive timestamp

Upgrade Method (JAdESSigner Component)

Upgrades existing JAdES signature to a new level.

Syntax

public void Upgrade(string sigLabel, int upgradeKind);
Public Sub Upgrade(ByVal SigLabel As String, ByVal UpgradeKind As Integer)

Remarks

Use this method to upgrade JAdES signature to a new level specified by UpgradeKind. Signatures can normally be upgraded from less sophisticated levels (B, T, LT) to more sophisticated (T, LT, LTA).

Supported levels:

jaslUnknown0Unknown signature level

jaslGeneric1Generic signature: JSON Web Signature (JWS)

jaslBaselineB2Baseline B (B-B, basic)

jaslBaselineT3Baseline T (B-T, timestamped)

jaslBaselineLT4Baseline LT (B-LT, long-term)

jaslBaselineLTA5Baseline LTA (B-LTA, long-term with archived timestamp)

The supported additional upgrade kinds are:

jukAddValidationDataRefs256Add signature validation references

jukAddValidationDataValues512Add signature validation values

jukAddTimestampValidationData1024Add timestamp validation data

ChainElementDownload Event (JAdESSigner Component)

Fires when there is a need to download a chain element from an online source.

Syntax

public event OnChainElementDownloadHandler OnChainElementDownload;

public delegate void OnChainElementDownloadHandler(object sender, JAdESSignerChainElementDownloadEventArgs e);

public class JAdESSignerChainElementDownloadEventArgs : EventArgs {
  public int Kind { get; }
  public string CertRDN { get; }
  public string CACertRDN { get; }
  public string Location { get; }
  public int Action { get; set; }
}
Public Event OnChainElementDownload As OnChainElementDownloadHandler

Public Delegate Sub OnChainElementDownloadHandler(sender As Object, e As JAdESSignerChainElementDownloadEventArgs)

Public Class JAdESSignerChainElementDownloadEventArgs Inherits EventArgs
  Public ReadOnly Property Kind As Integer
  Public ReadOnly Property CertRDN As String
  Public ReadOnly Property CACertRDN As String
  Public ReadOnly Property Location As String
  Public Property Action As Integer
End Class

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

veaAuto0Handle the action automatically (the default behaviour)

veaContinue1Accept the request implied by the event (accept the certificate, allow the object retrieval)

veaReject2Reject the request implied by the event (reject the certificate, disallow the object retrieval)

veaAcceptNow3Accept the validated certificate immediately

veaAbortNow4Abort the validation, reject the certificate

cekUnknown0Unknown or unsupported element type

cekCertificate1An X.509 certificate

cekCRL2A CRL

cekOCSP3An OCSP response

ChainElementNeeded Event (JAdESSigner Component)

Fires when an element required to validate the chain was not located.

Syntax

public event OnChainElementNeededHandler OnChainElementNeeded;

public delegate void OnChainElementNeededHandler(object sender, JAdESSignerChainElementNeededEventArgs e);

public class JAdESSignerChainElementNeededEventArgs : EventArgs {
  public int Kind { get; }
  public string CertRDN { get; }
  public string CACertRDN { get; }
}
Public Event OnChainElementNeeded As OnChainElementNeededHandler

Public Delegate Sub OnChainElementNeededHandler(sender As Object, e As JAdESSignerChainElementNeededEventArgs)

Public Class JAdESSignerChainElementNeededEventArgs Inherits EventArgs
  Public ReadOnly Property Kind As Integer
  Public ReadOnly Property CertRDN As String
  Public ReadOnly Property CACertRDN As String
End Class

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

cekUnknown0Unknown or unsupported element type

cekCertificate1An X.509 certificate

cekCRL2A CRL

cekOCSP3An OCSP response

ChainElementStore Event (JAdESSigner Component)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

public event OnChainElementStoreHandler OnChainElementStore;

public delegate void OnChainElementStoreHandler(object sender, JAdESSignerChainElementStoreEventArgs e);

public class JAdESSignerChainElementStoreEventArgs : EventArgs {
  public int Kind { get; }
  public byte[] Body { get; }
  public string URI { get; set; }
}
Public Event OnChainElementStore As OnChainElementStoreHandler

Public Delegate Sub OnChainElementStoreHandler(sender As Object, e As JAdESSignerChainElementStoreEventArgs)

Public Class JAdESSignerChainElementStoreEventArgs Inherits EventArgs
  Public ReadOnly Property Kind As Integer
  Public ReadOnly Property Body As Byte()
  Public Property URI As String
End Class

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

cekUnknown0Unknown or unsupported element type

cekCertificate1An X.509 certificate

cekCRL2A CRL

cekOCSP3An OCSP response

ChainValidated Event (JAdESSigner Component)

Reports the completion of a certificate chain validation.

Syntax

public event OnChainValidatedHandler OnChainValidated;

public delegate void OnChainValidatedHandler(object sender, JAdESSignerChainValidatedEventArgs e);

public class JAdESSignerChainValidatedEventArgs : EventArgs {
  public int Index { get; }
  public string EntityLabel { get; }
  public string SubjectRDN { get; }
  public int ValidationResult { get; }
  public int ValidationDetails { get; }
  public bool Cancel { get; set; }
}
Public Event OnChainValidated As OnChainValidatedHandler

Public Delegate Sub OnChainValidatedHandler(sender As Object, e As JAdESSignerChainValidatedEventArgs)

Public Class JAdESSignerChainValidatedEventArgs Inherits EventArgs
  Public ReadOnly Property Index As Integer
  Public ReadOnly Property EntityLabel As String
  Public ReadOnly Property SubjectRDN As String
  Public ReadOnly Property ValidationResult As Integer
  Public ReadOnly Property ValidationDetails As Integer
  Public Property Cancel As Boolean
End Class

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.
cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

ChainValidationProgress Event (JAdESSigner Component)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

public event OnChainValidationProgressHandler OnChainValidationProgress;

public delegate void OnChainValidationProgressHandler(object sender, JAdESSignerChainValidationProgressEventArgs e);

public class JAdESSignerChainValidationProgressEventArgs : EventArgs {
  public string EventKind { get; }
  public string CertRDN { get; }
  public string CACertRDN { get; }
  public int Action { get; set; }
}
Public Event OnChainValidationProgress As OnChainValidationProgressHandler

Public Delegate Sub OnChainValidationProgressHandler(sender As Object, e As JAdESSignerChainValidationProgressEventArgs)

Public Class JAdESSignerChainValidationProgressEventArgs Inherits EventArgs
  Public ReadOnly Property EventKind As String
  Public ReadOnly Property CertRDN As String
  Public ReadOnly Property CACertRDN As String
  Public Property Action As Integer
End Class

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

veaAuto0Handle the action automatically (the default behaviour)

veaContinue1Accept the request implied by the event (accept the certificate, allow the object retrieval)

veaReject2Reject the request implied by the event (reject the certificate, disallow the object retrieval)

veaAcceptNow3Accept the validated certificate immediately

veaAbortNow4Abort the validation, reject the certificate

Error Event (JAdESSigner Component)

Information about errors during signing.

Syntax

public event OnErrorHandler OnError;

public delegate void OnErrorHandler(object sender, JAdESSignerErrorEventArgs e);

public class JAdESSignerErrorEventArgs : EventArgs {
  public int ErrorCode { get; }
  public string Description { get; }
}
Public Event OnError As OnErrorHandler

Public Delegate Sub OnErrorHandler(sender As Object, e As JAdESSignerErrorEventArgs)

Public Class JAdESSignerErrorEventArgs Inherits EventArgs
  Public ReadOnly Property ErrorCode As Integer
  Public ReadOnly Property Description As String
End Class

Remarks

This event is fired in case of exceptional conditions during the JSON processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (JAdESSigner Component)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

public event OnExternalSignHandler OnExternalSign;

public delegate void OnExternalSignHandler(object sender, JAdESSignerExternalSignEventArgs e);

public class JAdESSignerExternalSignEventArgs : EventArgs {
  public string OperationId { get; }
  public string HashAlgorithm { get; }
  public string Pars { get; }
  public string Data { get; }
  public string SignedData { get; set; }
}
Public Event OnExternalSign As OnExternalSignHandler

Public Delegate Sub OnExternalSignHandler(sender As Object, e As JAdESSignerExternalSignEventArgs)

Public Class JAdESSignerExternalSignEventArgs Inherits EventArgs
  Public ReadOnly Property OperationId As String
  Public ReadOnly Property HashAlgorithm As String
  Public ReadOnly Property Pars As String
  Public ReadOnly Property Data As String
  Public Property SignedData As String
End Class

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the component via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact component being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The component uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

HTTPHeaderFieldNeeded Event (JAdESSigner Component)

This event is fired when HTTP header field value is required.

Syntax

public event OnHTTPHeaderFieldNeededHandler OnHTTPHeaderFieldNeeded;

public delegate void OnHTTPHeaderFieldNeededHandler(object sender, JAdESSignerHTTPHeaderFieldNeededEventArgs e);

public class JAdESSignerHTTPHeaderFieldNeededEventArgs : EventArgs {
  public string FieldName { get; }
  public string FieldValues { get; set; }
}
Public Event OnHTTPHeaderFieldNeeded As OnHTTPHeaderFieldNeededHandler

Public Delegate Sub OnHTTPHeaderFieldNeededHandler(sender As Object, e As JAdESSignerHTTPHeaderFieldNeededEventArgs)

Public Class JAdESSignerHTTPHeaderFieldNeededEventArgs Inherits EventArgs
  Public ReadOnly Property FieldName As String
  Public Property FieldValues As String
End Class

Remarks

This event is triggered when the type of signed data is HttpHeaders mechanism (jasdtHttpHeaders). It indicates that a HTTP header field value is needed.

For "(request target)" field name value return request method and target URI seperated by space character. For example: "GET https://nsoftware.com/sbb/"

Loaded Event (JAdESSigner Component)

This event is fired when the JSON has been loaded into memory.

Syntax

public event OnLoadedHandler OnLoaded;

public delegate void OnLoadedHandler(object sender, JAdESSignerLoadedEventArgs e);

public class JAdESSignerLoadedEventArgs : EventArgs {
  public bool Cancel { get; set; }
}
Public Event OnLoaded As OnLoadedHandler

Public Delegate Sub OnLoadedHandler(sender As Object, e As JAdESSignerLoadedEventArgs)

Public Class JAdESSignerLoadedEventArgs Inherits EventArgs
  Public Property Cancel As Boolean
End Class

Remarks

The handler for this event is a good place to check JWS/JAdES signature properties, which may be useful when preparing the signature.

Set Cancel to true to terminate JSON processing on this stage.

Notification Event (JAdESSigner Component)

This event notifies the application about an underlying control flow event.

Syntax

public event OnNotificationHandler OnNotification;

public delegate void OnNotificationHandler(object sender, JAdESSignerNotificationEventArgs e);

public class JAdESSignerNotificationEventArgs : EventArgs {
  public string EventID { get; }
  public string EventParam { get; }
}
Public Event OnNotification As OnNotificationHandler

Public Delegate Sub OnNotificationHandler(sender As Object, e As JAdESSignerNotificationEventArgs)

Public Class JAdESSignerNotificationEventArgs Inherits EventArgs
  Public ReadOnly Property EventID As String
  Public ReadOnly Property EventParam As String
End Class

Remarks

The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.

This component can fire this event with the following EventID values:

LoadedReports the completion of signature processing by the component. Use the event handler to access signature-related information. The EventParam value passed with this EventID is empty.
PayloadExtractedReports the completion of payload extraction by the component if ExtractPayload property is enabled. Use the event handler to access payload. The EventParam value passed with this EventID is empty.
BeforeAddArchiveTimestampTBD
BeforeAddSignatureTimestampTBD
BeforeAddSignedDataTimestampTBD
SignaturesLoadedNotifies the application that the component has finished loading signatures.
BeforeTimestampThis event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings.
TimestampErrorThis event is only fired if the component failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info.
TimestampRequestA timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA.

Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

ObjectNeeded Event (JAdESSigner Component)

This event is fired when object is required.

Syntax

public event OnObjectNeededHandler OnObjectNeeded;

public delegate void OnObjectNeededHandler(object sender, JAdESSignerObjectNeededEventArgs e);

public class JAdESSignerObjectNeededEventArgs : EventArgs {
  public string URI { get; }
  public string ContentType { get; }
  public bool Base64 { get; set; }
}
Public Event OnObjectNeeded As OnObjectNeededHandler

Public Delegate Sub OnObjectNeededHandler(sender As Object, e As JAdESSignerObjectNeededEventArgs)

Public Class JAdESSignerObjectNeededEventArgs Inherits EventArgs
  Public ReadOnly Property URI As String
  Public ReadOnly Property ContentType As String
  Public Property Base64 As Boolean
End Class

Remarks

This event is triggered when the type of signed data is ObjectIdByURI mechanism (jasdtObjectIdByURI). It is fired to request the data to be signed/verified.

The event handler must pass object data to the component via DataFile or DataStream or DataBytes or DataString property.

ObjectValidate Event (JAdESSigner Component)

This event is fired when object should be verified by user.

Syntax

public event OnObjectValidateHandler OnObjectValidate;

public delegate void OnObjectValidateHandler(object sender, JAdESSignerObjectValidateEventArgs e);

public class JAdESSignerObjectValidateEventArgs : EventArgs {
  public string URI { get; }
  public string ContentType { get; }
  public string HashAlgorithm { get; }
  public byte[] Hash { get; }
  public bool Base64 { get; }
  public bool Valid { get; set; }
}
Public Event OnObjectValidate As OnObjectValidateHandler

Public Delegate Sub OnObjectValidateHandler(sender As Object, e As JAdESSignerObjectValidateEventArgs)

Public Class JAdESSignerObjectValidateEventArgs Inherits EventArgs
  Public ReadOnly Property URI As String
  Public ReadOnly Property ContentType As String
  Public ReadOnly Property HashAlgorithm As String
  Public ReadOnly Property Hash As Byte()
  Public ReadOnly Property Base64 As Boolean
  Public Property Valid As Boolean
End Class

Remarks

This event is triggered when the type of signed data is ObjectIdByURIHash mechanism (jasdtObjectIdByURIHash). It is fired to validate the detached object.

The event handler must pass the object validity to the component via Valid parameter.

SignatureFound Event (JAdESSigner Component)

Signifies the start of signature validation.

Syntax

public event OnSignatureFoundHandler OnSignatureFound;

public delegate void OnSignatureFoundHandler(object sender, JAdESSignerSignatureFoundEventArgs e);

public class JAdESSignerSignatureFoundEventArgs : EventArgs {
  public int Index { get; }
  public string EntityLabel { get; }
  public string IssuerRDN { get; }
  public byte[] SerialNumber { get; }
  public byte[] SubjectKeyID { get; }
  public bool CertFound { get; }
  public bool ValidateSignature { get; set; }
  public bool ValidateChain { get; set; }
}
Public Event OnSignatureFound As OnSignatureFoundHandler

Public Delegate Sub OnSignatureFoundHandler(sender As Object, e As JAdESSignerSignatureFoundEventArgs)

Public Class JAdESSignerSignatureFoundEventArgs Inherits EventArgs
  Public ReadOnly Property Index As Integer
  Public ReadOnly Property EntityLabel As String
  Public ReadOnly Property IssuerRDN As String
  Public ReadOnly Property SerialNumber As Byte()
  Public ReadOnly Property SubjectKeyID As Byte()
  Public ReadOnly Property CertFound As Boolean
  Public Property ValidateSignature As Boolean
  Public Property ValidateChain As Boolean
End Class

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the SignatureValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (JAdESSigner Component)

Marks the completion of the signature validation routine.

Syntax

public event OnSignatureValidatedHandler OnSignatureValidated;

public delegate void OnSignatureValidatedHandler(object sender, JAdESSignerSignatureValidatedEventArgs e);

public class JAdESSignerSignatureValidatedEventArgs : EventArgs {
  public int Index { get; }
  public string EntityLabel { get; }
  public string IssuerRDN { get; }
  public byte[] SerialNumber { get; }
  public byte[] SubjectKeyID { get; }
  public int ValidationResult { get; }
  public bool Cancel { get; set; }
}
Public Event OnSignatureValidated As OnSignatureValidatedHandler

Public Delegate Sub OnSignatureValidatedHandler(sender As Object, e As JAdESSignerSignatureValidatedEventArgs)

Public Class JAdESSignerSignatureValidatedEventArgs Inherits EventArgs
  Public ReadOnly Property Index As Integer
  Public ReadOnly Property EntityLabel As String
  Public ReadOnly Property IssuerRDN As String
  Public ReadOnly Property SerialNumber As Byte()
  Public ReadOnly Property SubjectKeyID As Byte()
  Public ReadOnly Property ValidationResult As Integer
  Public Property Cancel As Boolean
End Class

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

svtReferenceCorrupted5Reference corrupted (XML-based signatures only)

TimestampFound Event (JAdESSigner Component)

Signifies the start of a timestamp validation routine.

Syntax

public event OnTimestampFoundHandler OnTimestampFound;

public delegate void OnTimestampFoundHandler(object sender, JAdESSignerTimestampFoundEventArgs e);

public class JAdESSignerTimestampFoundEventArgs : EventArgs {
  public int Index { get; }
  public string EntityLabel { get; }
  public string IssuerRDN { get; }
  public byte[] SerialNumber { get; }
  public byte[] SubjectKeyID { get; }
  public bool CertFound { get; }
  public bool ValidateTimestamp { get; set; }
  public bool ValidateChain { get; set; }
}
Public Event OnTimestampFound As OnTimestampFoundHandler

Public Delegate Sub OnTimestampFoundHandler(sender As Object, e As JAdESSignerTimestampFoundEventArgs)

Public Class JAdESSignerTimestampFoundEventArgs Inherits EventArgs
  Public ReadOnly Property Index As Integer
  Public ReadOnly Property EntityLabel As String
  Public ReadOnly Property IssuerRDN As String
  Public ReadOnly Property SerialNumber As Byte()
  Public ReadOnly Property SubjectKeyID As Byte()
  Public ReadOnly Property CertFound As Boolean
  Public Property ValidateTimestamp As Boolean
  Public Property ValidateChain As Boolean
End Class

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the ValidationResult and ChainValidationResult properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampRequest Event (JAdESSigner Component)

Fires when the component is ready to request a timestamp from an external TSA.

Syntax

public event OnTimestampRequestHandler OnTimestampRequest;

public delegate void OnTimestampRequestHandler(object sender, JAdESSignerTimestampRequestEventArgs e);

public class JAdESSignerTimestampRequestEventArgs : EventArgs {
  public string TSA { get; }
  public string TimestampRequest { get; }
  public string TimestampResponse { get; set; }
  public bool SuppressDefault { get; set; }
}
Public Event OnTimestampRequest As OnTimestampRequestHandler

Public Delegate Sub OnTimestampRequestHandler(sender As Object, e As JAdESSignerTimestampRequestEventArgs)

Public Class JAdESSignerTimestampRequestEventArgs Inherits EventArgs
  Public ReadOnly Property TSA As String
  Public ReadOnly Property TimestampRequest As String
  Public Property TimestampResponse As String
  Public Property SuppressDefault As Boolean
End Class

Remarks

Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

TimestampValidated Event (JAdESSigner Component)

Reports the completion of the timestamp validation routine.

Syntax

public event OnTimestampValidatedHandler OnTimestampValidated;

public delegate void OnTimestampValidatedHandler(object sender, JAdESSignerTimestampValidatedEventArgs e);

public class JAdESSignerTimestampValidatedEventArgs : EventArgs {
  public int Index { get; }
  public string EntityLabel { get; }
  public string IssuerRDN { get; }
  public byte[] SerialNumber { get; }
  public byte[] SubjectKeyID { get; }
  public string Time { get; }
  public int ValidationResult { get; }
  public int ChainValidationResult { get; }
  public int ChainValidationDetails { get; }
  public bool Cancel { get; set; }
}
Public Event OnTimestampValidated As OnTimestampValidatedHandler

Public Delegate Sub OnTimestampValidatedHandler(sender As Object, e As JAdESSignerTimestampValidatedEventArgs)

Public Class JAdESSignerTimestampValidatedEventArgs Inherits EventArgs
  Public ReadOnly Property Index As Integer
  Public ReadOnly Property EntityLabel As String
  Public ReadOnly Property IssuerRDN As String
  Public ReadOnly Property SerialNumber As Byte()
  Public ReadOnly Property SubjectKeyID As Byte()
  Public ReadOnly Property Time As String
  Public ReadOnly Property ValidationResult As Integer
  Public ReadOnly Property ChainValidationResult As Integer
  Public ReadOnly Property ChainValidationDetails As Integer
  Public Property Cancel As Boolean
End Class

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

svtReferenceCorrupted5Reference corrupted (XML-based signatures only)

TLSCertNeeded Event (JAdESSigner Component)

Fires when a remote TLS party requests a client certificate.

Syntax

public event OnTLSCertNeededHandler OnTLSCertNeeded;

public delegate void OnTLSCertNeededHandler(object sender, JAdESSignerTLSCertNeededEventArgs e);

public class JAdESSignerTLSCertNeededEventArgs : EventArgs {
  public string Host { get; }
  public string CANames { get; }
}
Public Event OnTLSCertNeeded As OnTLSCertNeededHandler

Public Delegate Sub OnTLSCertNeededHandler(sender As Object, e As JAdESSignerTLSCertNeededEventArgs)

Public Class JAdESSignerTLSCertNeededEventArgs Inherits EventArgs
  Public ReadOnly Property Host As String
  Public ReadOnly Property CANames As String
End Class

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (JAdESSigner Component)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

public event OnTLSCertValidateHandler OnTLSCertValidate;

public delegate void OnTLSCertValidateHandler(object sender, JAdESSignerTLSCertValidateEventArgs e);

public class JAdESSignerTLSCertValidateEventArgs : EventArgs {
  public string ServerHost { get; }
  public string ServerIP { get; }
  public bool Accept { get; set; }
}
Public Event OnTLSCertValidate As OnTLSCertValidateHandler

Public Delegate Sub OnTLSCertValidateHandler(sender As Object, e As JAdESSignerTLSCertValidateEventArgs)

Public Class JAdESSignerTLSCertValidateEventArgs Inherits EventArgs
  Public ReadOnly Property ServerHost As String
  Public ReadOnly Property ServerIP As String
  Public Property Accept As Boolean
End Class

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.

TLSEstablished Event (JAdESSigner Component)

Fires when a TLS handshake with Host successfully completes.

Syntax

public event OnTLSEstablishedHandler OnTLSEstablished;

public delegate void OnTLSEstablishedHandler(object sender, JAdESSignerTLSEstablishedEventArgs e);

public class JAdESSignerTLSEstablishedEventArgs : EventArgs {
  public string Host { get; }
  public string Version { get; }
  public string Ciphersuite { get; }
  public byte[] ConnectionId { get; }
  public bool Abort { get; set; }
}
Public Event OnTLSEstablished As OnTLSEstablishedHandler

Public Delegate Sub OnTLSEstablishedHandler(sender As Object, e As JAdESSignerTLSEstablishedEventArgs)

Public Class JAdESSignerTLSEstablishedEventArgs Inherits EventArgs
  Public ReadOnly Property Host As String
  Public ReadOnly Property Version As String
  Public ReadOnly Property Ciphersuite As String
  Public ReadOnly Property ConnectionId As Byte()
  Public Property Abort As Boolean
End Class

Remarks

The component uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (JAdESSigner Component)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

public event OnTLSHandshakeHandler OnTLSHandshake;

public delegate void OnTLSHandshakeHandler(object sender, JAdESSignerTLSHandshakeEventArgs e);

public class JAdESSignerTLSHandshakeEventArgs : EventArgs {
  public string Host { get; }
  public bool Abort { get; set; }
}
Public Event OnTLSHandshake As OnTLSHandshakeHandler

Public Delegate Sub OnTLSHandshakeHandler(sender As Object, e As JAdESSignerTLSHandshakeEventArgs)

Public Class JAdESSignerTLSHandshakeEventArgs Inherits EventArgs
  Public ReadOnly Property Host As String
  Public Property Abort As Boolean
End Class

Remarks

The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (JAdESSigner Component)

Reports the graceful closure of a TLS connection.

Syntax

public event OnTLSShutdownHandler OnTLSShutdown;

public delegate void OnTLSShutdownHandler(object sender, JAdESSignerTLSShutdownEventArgs e);

public class JAdESSignerTLSShutdownEventArgs : EventArgs {
  public string Host { get; }
}
Public Event OnTLSShutdown As OnTLSShutdownHandler

Public Delegate Sub OnTLSShutdownHandler(sender As Object, e As JAdESSignerTLSShutdownEventArgs)

Public Class JAdESSignerTLSShutdownEventArgs Inherits EventArgs
  Public ReadOnly Property Host As String
End Class

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

Bytes
byte[] (read-only)

Default: ""

Returns the raw certificate data in DER format.

CA
bool

Default: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this field when generating a new certificate to have its Basic Constraints extension generated automatically.

CAKeyID
byte[] (read-only)

Default: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the SubjectKeyID setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

CertType
CertTypes (read-only)

Default: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager component to load or create new certificate and certificate requests objects.

CRLDistributionPoints
string

Default: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this field when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

Curve
string

Default: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.

SB_EC_SECP112R1SECP112R1
SB_EC_SECP112R2SECP112R2
SB_EC_SECP128R1SECP128R1
SB_EC_SECP128R2SECP128R2
SB_EC_SECP160K1SECP160K1
SB_EC_SECP160R1SECP160R1
SB_EC_SECP160R2SECP160R2
SB_EC_SECP192K1SECP192K1
SB_EC_SECP192R1SECP192R1
SB_EC_SECP224K1SECP224K1
SB_EC_SECP224R1SECP224R1
SB_EC_SECP256K1SECP256K1
SB_EC_SECP256R1SECP256R1
SB_EC_SECP384R1SECP384R1
SB_EC_SECP521R1SECP521R1
SB_EC_SECT113R1SECT113R1
SB_EC_SECT113R2SECT113R2
SB_EC_SECT131R1SECT131R1
SB_EC_SECT131R2SECT131R2
SB_EC_SECT163K1SECT163K1
SB_EC_SECT163R1SECT163R1
SB_EC_SECT163R2SECT163R2
SB_EC_SECT193R1SECT193R1
SB_EC_SECT193R2SECT193R2
SB_EC_SECT233K1SECT233K1
SB_EC_SECT233R1SECT233R1
SB_EC_SECT239K1SECT239K1
SB_EC_SECT283K1SECT283K1
SB_EC_SECT283R1SECT283R1
SB_EC_SECT409K1SECT409K1
SB_EC_SECT409R1SECT409R1
SB_EC_SECT571K1SECT571K1
SB_EC_SECT571R1SECT571R1
SB_EC_PRIME192V1PRIME192V1
SB_EC_PRIME192V2PRIME192V2
SB_EC_PRIME192V3PRIME192V3
SB_EC_PRIME239V1PRIME239V1
SB_EC_PRIME239V2PRIME239V2
SB_EC_PRIME239V3PRIME239V3
SB_EC_PRIME256V1PRIME256V1
SB_EC_C2PNB163V1C2PNB163V1
SB_EC_C2PNB163V2C2PNB163V2
SB_EC_C2PNB163V3C2PNB163V3
SB_EC_C2PNB176W1C2PNB176W1
SB_EC_C2TNB191V1C2TNB191V1
SB_EC_C2TNB191V2C2TNB191V2
SB_EC_C2TNB191V3C2TNB191V3
SB_EC_C2ONB191V4C2ONB191V4
SB_EC_C2ONB191V5C2ONB191V5
SB_EC_C2PNB208W1C2PNB208W1
SB_EC_C2TNB239V1C2TNB239V1
SB_EC_C2TNB239V2C2TNB239V2
SB_EC_C2TNB239V3C2TNB239V3
SB_EC_C2ONB239V4C2ONB239V4
SB_EC_C2ONB239V5C2ONB239V5
SB_EC_C2PNB272W1C2PNB272W1
SB_EC_C2PNB304W1C2PNB304W1
SB_EC_C2TNB359V1C2TNB359V1
SB_EC_C2PNB368W1C2PNB368W1
SB_EC_C2TNB431R1C2TNB431R1
SB_EC_NISTP192NISTP192
SB_EC_NISTP224NISTP224
SB_EC_NISTP256NISTP256
SB_EC_NISTP384NISTP384
SB_EC_NISTP521NISTP521
SB_EC_NISTB163NISTB163
SB_EC_NISTB233NISTB233
SB_EC_NISTB283NISTB283
SB_EC_NISTB409NISTB409
SB_EC_NISTB571NISTB571
SB_EC_NISTK163NISTK163
SB_EC_NISTK233NISTK233
SB_EC_NISTK283NISTK283
SB_EC_NISTK409NISTK409
SB_EC_NISTK571NISTK571
SB_EC_GOSTCPTESTGOSTCPTEST
SB_EC_GOSTCPAGOSTCPA
SB_EC_GOSTCPBGOSTCPB
SB_EC_GOSTCPCGOSTCPC
SB_EC_GOSTCPXCHAGOSTCPXCHA
SB_EC_GOSTCPXCHBGOSTCPXCHB
SB_EC_BRAINPOOLP160R1BRAINPOOLP160R1
SB_EC_BRAINPOOLP160T1BRAINPOOLP160T1
SB_EC_BRAINPOOLP192R1BRAINPOOLP192R1
SB_EC_BRAINPOOLP192T1BRAINPOOLP192T1
SB_EC_BRAINPOOLP224R1BRAINPOOLP224R1
SB_EC_BRAINPOOLP224T1BRAINPOOLP224T1
SB_EC_BRAINPOOLP256R1BRAINPOOLP256R1
SB_EC_BRAINPOOLP256T1BRAINPOOLP256T1
SB_EC_BRAINPOOLP320R1BRAINPOOLP320R1
SB_EC_BRAINPOOLP320T1BRAINPOOLP320T1
SB_EC_BRAINPOOLP384R1BRAINPOOLP384R1
SB_EC_BRAINPOOLP384T1BRAINPOOLP384T1
SB_EC_BRAINPOOLP512R1BRAINPOOLP512R1
SB_EC_BRAINPOOLP512T1BRAINPOOLP512T1
SB_EC_CURVE25519CURVE25519
SB_EC_CURVE448CURVE448

Fingerprint
string (read-only)

Default: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

FriendlyName
string (read-only)

Default: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

HashAlgorithm
string

Default: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use SigAlgorithm to find out the hash algorithm that is part of the certificate signature.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

Issuer
string (read-only)

Default: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via IssuerRDN.

IssuerRDN
string

Default: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

KeyAlgorithm
string

Default: "0"

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Use the KeyBits, Curve, and PublicKeyBytes fields to get more details about the key the certificate contains.

KeyBits
int (read-only)

Default: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the PublicKeyBytes or PrivateKeyBytes field would typically contain auxiliary values, and therefore be longer.

KeyFingerprint
string (read-only)

Default: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the Fingerprint field. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

KeyUsage
int

Default: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

Set this field before generating the certificate to propagate the key usage flags to the new certificate.

KeyValid
bool (read-only)

Default: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

OCSPLocations
string

Default: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this field before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

OCSPNoCheck
bool

Default: False

Accessor to the value of the certificate's ocsp-no-check extension.

Origin
int (read-only)

Default: 0

Returns the location that the certificate was taken or loaded from.

PolicyIDs
string

Default: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this field when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

PrivateKeyBytes
byte[] (read-only)

Default: ""

Returns the certificate's private key in DER-encoded format. It is normal for this field to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

PrivateKeyExists
bool (read-only)

Default: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This field is independent from PrivateKeyBytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

PrivateKeyExtractable
bool (read-only)

Default: False

Indicates whether the private key is extractable (exportable).

PublicKeyBytes
byte[] (read-only)

Default: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

Qualified
bool (read-only)

Default: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

QualifiedStatements
QualifiedStatementsTypes

Default: 0

Returns a simplified qualified status of the certificate.

Qualifiers
string (read-only)

Default: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

SelfSigned
bool (read-only)

Default: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

SerialNumber
byte[]

Default: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

SigAlgorithm
string (read-only)

Default: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

Source
PKISources (read-only)

Default: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Subject
string (read-only)

Default: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via SubjectRDN.

SubjectAlternativeName
string

Default: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main SubjectRDN field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

SubjectKeyID
byte[]

Default: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The SubjectKeyID and CAKeyID fields of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

SubjectRDN
string

Default: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

Valid
bool (read-only)

Default: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

ValidFrom
string

Default: ""

The time point at which the certificate becomes valid, in UTC.

ValidTo
string

Default: ""

The time point at which the certificate expires, in UTC.

Constructors

public Certificate(byte[] bytes, int startIndex, int count, string password);
Public Certificate(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer, ByVal Password As String)

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.

public Certificate(byte[] certBytes, int certStartIndex, int certCount, byte[] keyBytes, int keyStartIndex, int keyCount, string password);
Public Certificate(ByVal CertBytes As Byte(), ByVal CertStartIndex As Integer, ByVal CertCount As Integer, ByVal KeyBytes As Byte(), ByVal KeyStartIndex As Integer, ByVal KeyCount As Integer, ByVal Password As String)

Loads the X.509 certificate from a memory buffer.

CertBytes is a buffer containing the raw certificate data. CertStartIndex and CertCount specify the starting position and number of bytes to be read from the buffer, respectively.

KeyBytes is a buffer containing the private key data. KeyStartIndex and KeyCount specify the starting position and number of bytes to be read from the buffer, respectively.

Password is a password encrypting the certificate.

public Certificate(byte[] bytes, int startIndex, int count);
Public Certificate(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer)

Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively.

public Certificate(string path, string password);
Public Certificate(ByVal Path As String, ByVal Password As String)

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data. Password is a password encrypting the certificate.

public Certificate(string certPath, string keyPath, string password);
Public Certificate(ByVal CertPath As String, ByVal KeyPath As String, ByVal Password As String)

Loads the X.509 certificate from a file. CertPath specifies the full path to the file containing the certificate data. KeyPath specifies the full path to the file containing the private key. Password is a password encrypting the certificate.

public Certificate(string path);
Public Certificate(ByVal Path As String)

Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data.

Public Certificate(ByVal Stream As System.IO.Stream)

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public Certificate(System.IO.Stream stream, string password);
Public Certificate(ByVal Stream As System.IO.Stream, ByVal Password As String)

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data. Password is a password encrypting the certificate.

public Certificate(System.IO.Stream certStream, System.IO.Stream keyStream, string password);
Public Certificate(ByVal CertStream As System.IO.Stream, ByVal KeyStream As System.IO.Stream, ByVal Password As String)

Loads the X.509 certificate from a stream. CertStream is a stream containing the certificate data. KeyStream is a stream containing the private key. Password is a password encrypting the certificate.

public Certificate();
Public Certificate()

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

The following fields are available:

Fields

Bytes
byte[] (read-only)

Default: ""

Returns the raw CRL data in DER format.

CAKeyID
byte[]

Default: ""

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

EntryCount
int (read-only)

Default: 0

Returns the number of certificate status entries in the CRL.

Issuer
string (read-only)

Default: ""

The common name of the CRL issuer (CA), typically a company name.

IssuerRDN
string (read-only)

Default: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

Location
string (read-only)

Default: ""

The URL that the CRL was downloaded from.

NextUpdate
string

Default: ""

The planned time and date of the next version of this CRL to be published.

SigAlgorithm
string

Default: "0"

The public key algorithm that was used by the CA to sign this CRL.

Source
PKISources (read-only)

Default: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

TBS
byte[] (read-only)

Default: ""

The to-be-signed part of the CRL (the CRL without the signature part).

ThisUpdate
string

Default: ""

The date and time at which this version of the CRL was published.

Constructors

public CRL(byte[] bytes, int startIndex, int count);
Public CRL(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer)

Creates a CRL object from a memory buffer. Bytes is a buffer containing raw (DER) CRL data, StartIndex and Count specify the starting position and the length of the CRL data in the buffer, respectively.

public CRL(string location);
Public CRL(ByVal Location As String)

Creates a CRL object by downloading it from a remote location.

public CRL(System.IO.Stream stream);
Public CRL(ByVal Stream As System.IO.Stream)

Creates a CRL object from data contained in a stream.

public CRL();
Public CRL()

Creates an empty CRL object.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

Fields

AsyncDocumentID
string

Default: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

CustomParams
string

Default: ""

Custom parameters to be passed to the signing service (uninterpreted).

Data
string

Default: ""

Additional data to be included in the async state and mirrored back by the requestor.

ExternalHashCalculation
bool

Default: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth component.

If set to true, the component will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

HashAlgorithm
string

Default: "SHA256"

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

KeyID
string

Default: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

KeySecret
string

Default: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the KeyID topic.

Method
AsyncSignMethods

Default: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

Mode
ExternalCryptoModes

Default: 0

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with the OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

PublicKeyAlgorithm
string

Default: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Constructors

public ExternalCrypto();
Public ExternalCrypto()

Creates a new ExternalCrypto object with default field values.

JAdESSignature Type

The component is a container for an JWS/JAdES signature.

Remarks

JSON message may include any number of JWS/JAdES signatures. component stores one of them.

The following fields are available:

Fields

ChainValidationDetails
int (read-only)

Default: 0

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

ChainValidationResult
ChainValidities (read-only)

Default: 0

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

ClaimedSigningTime
string

Default: ""

The signing time from the signer's computer.

Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.

CompatibilityErrors
int (read-only)

Default: 0

Returns compatibility errors encountered during validation.

Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.

ContainsLongTermInfo
bool (read-only)

Default: False

Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).

ContentType
string

Default: ""

Specifies payload content type.

Use this property to indicate the content type of the JWS Payload.

This property provides a way for the application to disambiguate among different kinds of objects that might be present in the payload, but it is typically not used when the kind of object is already known. The value of this property is a string that conforms to the Internet Media Type (MIME) format, such as "text/plain" or "application/json".

It is optional to use this property and it is recommended to omit the "application/" prefix of the media type value when it is not needed. The recipient of the signed message should treat the value as if "application/" were prepended to it, unless it already contains a '/'.

Countersigned
bool (read-only)

Default: False

Indicates if the signature is countersigned.

Use this property to find out whether the JWS/JAdES signature contains any countersignatures over the main signature(s).

EntityLabel
string (read-only)

Default: ""

Use this property to get the signature entity label.

This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.

HashAlgorithm
string

Default: "SHA256"

Specifies the hash algorithm to be used.

Supported values:

SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512

IssuerRDN
string (read-only)

Default: ""

The Relative Distinguished Name of the signing certificate's issuer.

A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.

JAdESVersion
JAdESVersions

Default: 1

Specifies JAdES version.

This property specifies the version of the JAdES specification the signature should comply with.

The supported values are:

javUnknown0Unknown

jav1111JAdES v1.1.1

LastArchivalTime
string (read-only)

Default: ""

Indicates the most recent archival time of an archived signature

This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.

Level
JAdESSignatureLevels

Default: 2

Specifies the signature kind and level.

JAdES standard defines a number of different 'levels' of signatures which can be used for different purposes.

Use the Generic value to produce JWS signature.

The supported levels are:

jaslUnknown0Unknown signature level

jaslGeneric1Generic signature: JSON Web Signature (JWS)

jaslBaselineB2Baseline B (B-B, basic)

jaslBaselineT3Baseline T (B-T, timestamped)

jaslBaselineLT4Baseline LT (B-LT, long-term)

jaslBaselineLTA5Baseline LTA (B-LTA, long-term with archived timestamp)

ObjectType
string

Default: "jose+json"

Specifies signature object content type.

Use this property to specify the content type of the signature object.

It is used by the application to differentiate between different types of objects that might be present in an application data structure containing a JWS or JAdES.

The default value is "jose+json" which indicates that it is a JWS or JAdES using the JWS JSON Serialization, and "jose" which indicates that the object is a JWS or JAdES using the JWS Compact Serialization. Other type values can also be used by the application.

ParentEntity
string

Default: ""

Use this property to get the parent signature label.

This property contains the unique entity label of the current signature's parent object - typically a higher-level signature or a timestamp.

PolicyHash
string

Default: ""

The signature policy hash value.

Use this property to get the signature policy hash from EPES signatures

PolicyHashAlgorithm
string

Default: ""

The algorithm that was used to calculate the signature policy hash

Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from PolicyHash.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

PolicyID
string

Default: ""

The policy ID that was included or to be included into the signature.

Use this property to retrieve the signature policy identifier from EPES signatures.

PolicyURI
string

Default: ""

The signature policy URI that was included in the signature.

Use this property to set or retrieve the URI of the signature policy from EPES signatures.

SerialNumber
byte[] (read-only)

Default: ""

The serial number of the signing certificate.

SignatureBytes
byte[] (read-only)

Default: ""

Returns the binary representation of the JSON/JAdES signature.

SignatureValidationResult
SignatureValidities (read-only)

Default: 0

The outcome of the cryptographic signature validation.

The following signature validity values are supported:

svtValid0The signature is valid

svtUnknown1Signature validity is unknown

svtCorrupted2The signature is corrupted

svtSignerNotFound3Failed to acquire the signing certificate. The signature cannot be validated.

svtFailure4General failure

svtReferenceCorrupted5Reference corrupted (XML-based signatures only)

SignedData
string

Default: ""

The sigD header parameter in JSON format that was included or to be included into the signature.

SignedDataType
JAdESSignedDataTypes

Default: 0

Specifies the type of signed data.

Supported values:

jasdtPayload0JWS Payload
jasdtHttpHeaders1HttpHeaders mechanism
jasdtObjectIdByURI2ObjectIdByURI mechanism
jasdtObjectIdByURIHash3ObjectIdByURIHash mechanism
jasdtCustom4Custom mechanism

SubjectKeyID
byte[] (read-only)

Default: ""

Contains the subject key identifier of the signing certificate.

Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.

SubjectRDN
string (read-only)

Default: ""

Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.

Timestamped
bool (read-only)

Default: False

Use this property to establish whether the signature contains an embedded timestamp.

ValidatedSigningTime
string (read-only)

Default: ""

Contains the certified signing time.

Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.

ClaimedSigningTime returns a non-trusted signing time from the signer's computer.

Both times are in UTC.

ValidationLog
string (read-only)

Default: ""

Contains the complete log of the certificate validation routine.

Use this property to access the chain validation log produced by the component. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.

Constructors

public JAdESSignature();
Public JAdESSignature()

Creates a new JAdES/JWS signature object.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).

An OCSP response is a snapshot of the certificate status at a given time.

The following fields are available:

Fields

Bytes
byte[] (read-only)

Default: ""

A buffer containing the raw OCSP response data.

EntryCount
int (read-only)

Default: 0

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

Issuer
string (read-only)

Default: ""

Indicates the issuer of this response (a CA or its authorized representative).

IssuerRDN
string (read-only)

Default: ""

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

Location
string (read-only)

Default: ""

The location of the OCSP responder.

ProducedAt
string

Default: ""

Specifies the time when the response was produced, in UTC.

SigAlgorithm
string

Default: "0"

The public key algorithm that was used by the CA to sign this OCSP response.

Source
PKISources (read-only)

Default: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Constructors

public OCSPResponse(byte[] bytes, int startIndex, int count);
Public OCSPResponse(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer)

Initializes the response from a memory buffer. Bytes is a buffer containing raw OCSP response data, StartIndex and Count specify the starting position and the number of bytes to be read from this buffer.

public OCSPResponse(string location);
Public OCSPResponse(ByVal Location As String)

Downloads an OCSP response from a remote location.

Public OCSPResponse(ByVal Stream As System.IO.Stream)

Initializes the response with the data from a stream.

public OCSPResponse();
Public OCSPResponse()

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

The following fields are available:

Fields

Address
string

Default: ""

The IP address of the proxy server.

Authentication
ProxyAuthTypes

Default: 0

The authentication type used by the proxy server.

patNoAuthentication0
patBasic1
patDigest2
patNTLM3

Password
string

Default: ""

The password to authenticate to the proxy server.

Port
int

Default: 0

The port on the proxy server to connect to.

ProxyType
ProxyTypes

Default: 0

The type of the proxy server.

cptNone0
cptSocks41
cptSocks52
cptWebTunnel3
cptHTTP4

RequestHeaders
string

Default: ""

Contains HTTP request headers for WebTunnel and HTTP proxy.

ResponseBody
string

Default: ""

Contains the HTTP or HTTPS (WebTunnel) proxy response body.