ASiCVerifier Component
Properties Methods Events Config Settings Errors
The ASiCVerifier component verifies signature containers.
Syntax
nsoftware.SecureBlackbox.ASiCVerifier
Remarks
ASiCVerifier provides the functionality of verifying signatures residing in Associated Signature Containers.
Both ASiC-S and ASiC-E profiles are supported.
ASiCVerifier verifier = new ASiCVerifier();
verifier.setInputFile("./SignedFile.scs"); // the path of the signed file
verifier.setExtractionMode(ASiCVerifier.aemAll); // set the extraction method
verifier.setOutputPath("./MyFiles"); // the path where the extracted files will be saved
verifier.verify();
Property List
The following is the full list of the properties of the component with short descriptions. Click on the links for further details.
AllSignaturesValid | The cumulative validity of all signatures. |
AutoValidateSignatures | Specifies whether ASiCVerifier should validate any present signatures when the document is opened. |
BlockedCertificates | The certificates that must be rejected as trust anchors. |
Certificates | A collection of certificates included in the electronic signature. |
CheckTrustedLists | Specifies whether the component should attempt to validate chain trust via a known Trusted List. |
CRLs | A collection of certificate revocation lists embedded into the signature by the signer. |
ExtractionMode | Specifies which entries should be extracted from the container upon verification. |
Files | Lists all files contained in the container. |
FIPSMode | Reserved. |
IgnoreChainValidationErrors | Makes the component tolerant to chain validation errors. |
InputBytes | Use this property to pass the input to component in byte array form. |
InputFile | A path to the ASiC container to process. |
InputStream | A stream containing ASiC data. |
KnownCertificates | Additional certificates for chain validation. |
KnownCRLs | Additional CRLs for chain validation. |
KnownOCSPs | Additional OCSP responses for chain validation. |
OCSPs | A collection of OCSP responses embedded into the signature. |
OfflineMode | Switches the component to offline mode. |
OutputBytes | Use this property to read the output the component object has produced. |
OutputFile | The file where the processed data will be saved. |
OutputPath | A local path to extract the files to. |
OutputStream | The stream where the file is to be extracted. |
Profile | Specifies a pre-defined profile to apply when creating the signature. |
Proxy | The proxy server settings. |
RevocationCheck | Specifies the kind(s) of revocation check to perform for all chain certificates. |
Signatures | Contains the list of signatures included in the ASiC container. |
SocketSettings | Manages network connection settings. |
Timestamps | Contains a collection of timestamps for the processed document. |
TLSClientChain | The TLS client certificate chain. |
TLSServerChain | The TLS server's certificate chain. |
TLSSettings | Manages TLS layer settings. |
TrustedCertificates | A list of trusted certificates for chain validation. |
ValidationMoment | The time point at which signature validity is to be established. |
Method List
The following is the full list of the methods of the component with short descriptions. Click on the links for further details.
Close | Closes an opened container. |
Config | Sets or retrieves a configuration setting. |
DoAction | Performs an additional action. |
ExtractFile | Extracts a file to one of the output media (bytes, stream, or disk file). |
ExtractFiles | Extracts files covered by a signature to OutputPath . |
Open | Opens an existing container for signing or updating. |
Reset | Resets the component settings. |
Revalidate | Revalidates a signature in accordance with current settings. |
SelectInfo | Select signature information for a specific entity. |
Unsign | Deletes a signature from the container. |
Verify | Verifies all signatures in the ASiC container. |
Event List
The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.
ChainElementDownload | Fires when there is a need to download a chain element from an online source. |
ChainElementNeeded | Fires when an element required to validate the chain was not located. |
ChainElementStore | This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature. |
ChainValidated | Reports the completion of a certificate chain validation. |
ChainValidationProgress | This event is fired multiple times during chain validation to report various stages of the validation procedure. |
ContainerLoaded | This event is fired when the container has been loaded into memory. |
Error | Information about errors during ASiC signature verification. |
FileExtractionStart | Signifies the start of a file extraction process. |
Notification | This event notifies the application about an underlying control flow event. |
SignatureFound | Signifies the start of signature validation. |
SignatureValidated | Marks the completion of the signature validation routine. |
TimestampFound | Signifies the start of a timestamp validation routine. |
TimestampValidated | Reports the completion of the timestamp validation routine. |
TLSCertNeeded | Fires when a remote TLS party requests a client certificate. |
TLSCertValidate | This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance. |
TLSEstablished | Fires when a TLS handshake with Host successfully completes. |
TLSHandshake | Fires when a new TLS handshake is initiated, before the handshake commences. |
TLSShutdown | Reports the graceful closure of a TLS connection. |
Config Settings
The following is a list of config settings for the component with short descriptions. Click on the links for further details.
AddAllDataObjectsTimestamp | Whether to add all data objects timestamp during signing. |
AsyncDocumentID | Specifies the document ID for SignAsyncEnd() call. |
ChainCurrentCACert | Returns the current CA certificate. |
ChainCurrentCert | Returns the certificate that is currently being validated. |
ChainCurrentCRL | Returns the current CRL. |
ChainCurrentCRLSize | Returns the size of the current CRL. |
ChainCurrentOCSP | Returns the current OCSP response. |
ChainCurrentOCSPSigner | Returns the signer of the current OCSP object. |
ChainInterimDetails | Returns the current interim validation details. |
ChainInterimResult | Returns the current interim validation result. |
CheckValidityPeriodForTrusted | Whether to check validity period for trusted certificates. |
ClaimedRolesXML | The XML content of the claimed roles. |
ClaimedRoleText | The text of the claimed role. |
CmsOptAnnexKArchiveTimestampV2Mode | Toggles use of Annex K method of calculating validation timestamp hashes. |
CmsOptCheckATSHashIndexElements | Enables extra checks when processing ATSHashIndex attribute. |
CmsOptCompareRDNAsStrings | Enforces comparison of RDN elements as text strings, rather than their byte encodings. |
CmsOptDEREncodeContentForATSv2 | Enables DER encoding for ATSv2 hashed content. |
CmsOptDigitPADSSCompatibility | Enables Digit PADSS compatibility mode. |
CmsOptForceSigningCertificateV2Usage | Enforces use of signing-certificate-v2 attribute. |
CmsOptIgnoreDERReqInArchiveTimestamps | Switches off DER encoding requirement for archival timestamps. |
CmsOptImzagerMIMCompatibility | Enables Imzager MIM compatibility mode. |
CmsOptIncludeCertToAttributes | Regulates whether to include the signing certificate to the signature as the signing-certificate attribute. |
CmsOptIncludeCertToMessage | Regulates whether to include the signing certificate and its chain to the CMS. |
CmsOptInsertContentType | Regulates whether the content-type time attribute should be included in the signature structure. |
CmsOptInsertMessageDigests | Regulates whether the message-digest signed attribute should be included in the signature structure. |
CmsOptInsertSigningTime | Regulates whether the signing-time attribute should be included in the signature structure. |
CmsOptSkipEnvContentInfoOnSigArchival | Excludes hashing of enveloped content when calculating an archival timestamp. |
CmsOptUseATSHashIndexV1 | Enables use of ATSHashIndexV1 attribute. |
CmsOptUseATSHashIndexV3 | Enables the use of the third version of archival timestamps. |
CmsOptUseGeneralizedTimeFormat | Enables or disables encoding of the signing-time attribute using ASN.1 GENERALIZEDTIME type. |
CmsOptUseGenericSigAlgorithmOIDs | Enables use of generic signature algorithm OIDs in the signature. |
CmsOptUsePlainContentForTimestampHashes | Makes CAdESSigner ignore ASN.1 content formatting when calculating timestamp hashes. |
CommitmentTypeIndicationAllSignedDataObjects[Index] | Specifies the CommitmentTypeIndication's AllSignedDataObjects. |
CommitmentTypeIndicationCount | The number of the CommitmentTypeIndication elements. |
CommitmentTypeIndicationIdentifier[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier. |
CommitmentTypeIndicationIdentifierDescription[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's Description. |
CommitmentTypeIndicationIdentifierDocumentationReferences[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences. |
CommitmentTypeIndicationIdentifierQualifier[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier. |
CommitmentTypeIndicationObjectReference[Index] | Specifies the CommitmentTypeIndication's ObjectReference. |
CommitmentTypeIndicationQualifiersXML[Index] | The XML content of the CommitmentTypeIndication's Qualifiers. |
CustomTrustedLists | Specifies the custom TrustedLists. |
CustomTSLs | Specifies the custom TrustedLists. |
DataObjectFormatCount | The number of the DataObjectFormat elements. |
DataObjectFormatDescription[Index] | Specifies the DataObjectFormat's Description. |
DataObjectFormatEncoding[Index] | Specifies the DataObjectFormat's Encoding. |
DataObjectFormatMimeType[Index] | Specifies the DataObjectFormat's MimeType. |
DataObjectFormatObjectIdentifier[Index] | Specifies the DataObjectFormat's ObjectIdentifier's Identifier. |
DataObjectFormatObjectIdentifierDescription[Index] | Specifies the DataObjectFormat's ObjectIdentifier's Description. |
DataObjectFormatObjectIdentifierDocumentationReferences[Index] | Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences. |
DataObjectFormatObjectIdentifierQualifier[Index] | Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier. |
DataObjectFormatObjectReference[Index] | Specifies the DataObjectFormat's ObjectReference. |
DislikeOpenEndedOCSPs | Tells the component to discourage OCSP responses without an explicit NextUpdate parameter. |
ExclusiveCanonicalizationPrefix | Specifies the exclusive canonicalization prefix. |
ForceCompleteChainValidation | Whether to check the CA certificates when the signing certificate is invalid. |
ForceCompleteChainValidationForTrusted | Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors. |
GracePeriod | Specifies a grace period to apply during revocation information checks. |
HMACKey | The key value for HMAC. |
HMACOutputLength | Sets the length of the HMAC output. |
HMACSigningUsed | Whether to use HMAC signing. |
IgnoreChainLoops | Whether chain loops should be ignored. |
IgnoreChainValidationErrors | Whether to ignore any certificate chain validation issues. |
IgnoreOCSPNoCheckExtension | Whether the OCSP NoCheck extension should be ignored. |
IgnoreSystemTrust | Whether trusted Windows Certificate Stores should be treated as trusted. |
IgnoreTimestampFailure | Whether to ignore time-stamping failure during signing. |
ImplicitlyTrustSelfSignedCertificates | Whether to trust self-signed certificates. |
IncludeKnownRevocationInfoToSignature | Whether to include custom revocation info to the signature. |
InclusiveNamespacesPrefixList | Specifies the InclusiveNamespaces PrefixList. |
KeyInfoID | Specifies the ID for KeyInfo element. |
KeyName | Contains information about the key used for signing. |
ManifestCount | TBD. |
ManifestID[i] | TBD. |
ManifestObjectIndex[i] | TBD. |
ManifestXML[i] | TBD. |
ObjectCount | TBD. |
ObjectEncoding[i] | TBD. |
ObjectID[i] | TBD. |
ObjectMimeType[i] | TBD. |
ObjectSignaturePropertiesCount | TBD. |
ObjectSignaturePropertiesID[i] | TBD. |
ObjectSignaturePropertiesObjectIndex[i] | TBD. |
ObjectSignaturePropertiesXML[i] | TBD. |
ObjectSignaturePropertyCount | TBD. |
ObjectSignaturePropertyID[i] | TBD. |
ObjectSignaturePropertyPropertiesIndex[i] | TBD. |
ObjectSignaturePropertyTarget[i] | TBD. |
ObjectSignaturePropertyXML[i] | TBD. |
ObjectXML[i] | TBD. |
Overwrite | Forcefully overwrite OutputFile if it exists. |
PolicyDescription | signature policy description. |
PolicyDescription | signature policy description. |
PolicyExplicitText | The explicit text of the user notice. |
PolicyExplicitText | The explicit text of the user notice. |
PolicyUNNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
PolicyUNNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
PolicyUNOrganization | The organization part of the NoticeReference qualifier. |
PolicyUNOrganization | The organization part of the NoticeReference qualifier. |
ProductionPlace | Identifies the place of the signature production. |
ProductionPlace | Identifies the place of the signature production. |
PromoteLongOCSPResponses | Whether long OCSP responses are requested. |
PSSUsed | Whether to use RSASSA-PSS algorithm. |
PSSUsed | Whether to use RSASSA-PSS algorithm. |
QualifyingPropertiesID | Specifies the ID for QualifyingProperties element. |
QualifyingPropertiesObjectID | Specifies the ID for object with QualifyingProperties element. |
QualifyingPropertiesReferenceCount | The number of the QualifyingPropertiesReference elements. |
QualifyingPropertiesReferenceID[Index] | Specifies the QualifyingPropertiesReference's ID. |
QualifyingPropertiesReferenceURI[Index] | Specifies the QualifyingPropertiesReference's URI. |
RefsTimestampType | Specifies references timestamp type to include to the signature. |
SchemeParams | The algorithm scheme parameters to employ. |
SignatureID | Specifies the ID for Signature element. |
SignaturePrefix | Specifies the signature prefix. |
SignatureValueID | Specifies the ID for SignatureValue element. |
SignedInfoID | Specifies the ID for SignedInfo element. |
SignedPropertiesID | Specifies the ID for SignedProperties element. |
SignedPropertiesReferenceCanonicalizationMethod | Specifies the canonicalization method used in SignedProperties reference. |
SignedPropertiesReferenceHashAlgorithm | Specifies the hash algorithm used in SignedProperties reference. |
SignedPropertiesReferenceID | Specifies the ID for Reference element that points to SignedProperties element. |
SignedPropertiesReferenceInclusiveNamespacesPrefixList | Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference. |
SignedPropertiesReferenceIndex | Specifies the index of SignedProperties reference. |
SignedSignaturePropertiesID | Specifies the ID for SignedSignatureProperties element. |
SigningCertificatesChain | The indicator of which certificates should be/are included as the signing chain. |
SigningCertificatesHashAlgorithm | Specifies the hash algorithm used for SigningCertificates. |
SigPolicyDescription | signature policy description. |
SigPolicyDescription | signature policy description. |
SigPolicyExplicitText | The explicit text of the user notice. |
SigPolicyExplicitText | The explicit text of the user notice. |
SigPolicyHash | The EPES policy hash. |
SigPolicyHash | The EPES policy hash. |
SigPolicyHashAlgorithm | The hash algorithm that was used to generate the EPES policy hash. |
SigPolicyHashAlgorithm | The hash algorithm that was used to generate the EPES policy hash. |
SigPolicyID | The EPES policy ID. |
SigPolicyID | The EPES policy ID. |
SigPolicyNoticeNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
SigPolicyNoticeNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
SigPolicyNoticeOrganization | The organization part of the NoticeReference qualifier. |
SigPolicyNoticeOrganization | The organization part of the NoticeReference qualifier. |
SigPolicyURI | The EPES policy URI. |
SigPolicyURI | The EPES policy URI. |
TempPath | Path for storing temporary files. |
TimestampCanonicalizationMethod | Specifies canonicalization method used in timestamp. |
TimestampResponse | A base16-encoded timestamp response received from a TSA. |
TimestampValidationDataDetails | Specifies timestamp validation data details to include to the signature. |
TLSChainValidationDetails | Contains the advanced details of the TLS server certificate validation. |
TLSChainValidationResult | Contains the result of the TLS server certificate validation. |
TLSClientAuthRequested | Indicates whether the TLS server requests client authentication. |
TLSValidationLog | Contains the log of the TLS server certificate validation. |
TolerateMinorChainIssues | Whether to tolerate minor chain issues. |
TspAttemptCount | Specifies the number of timestamping request attempts. |
TspHashAlgorithm | Sets a specific hash algorithm for use with the timestamping service. |
TspReqPolicy | Sets a request policy ID to include in the timestamping request. |
UseDefaultTrustedLists | Enables or disables the use of the default TrustedLists. |
UseDefaultTSLs | Enables or disables the use of the default TrustedLists. |
UseHMACSigning | Whether to use HMAC signing. |
UseHMACSigning | Whether to use HMAC signing. |
UseMicrosoftCTL | Enables or disables the automatic use of the Microsoft online certificate trust list. |
UsePSS | Whether to use RSASSA-PSS algorithm. |
UsePSS | Whether to use RSASSA-PSS algorithm. |
UseSystemCertificates | Enables or disables the use of the system certificates. |
UseUTF8Filenames | Specifies whether to use UTF-8 filenames. |
UseValidationCache | Enables or disable the use of the product-wide certificate chain validation cache. |
UseValidatorSettingsForTLSValidation | Whether to employ the primary chain validator setup for auxiliary TLS chain validations. |
ValidationDataRefsDetails | Specifies validation data references details to include to the signature. |
ValidationDataRefsHashAlgorithm | Specifies the hash algorithm used in validation data references. |
ValidationDataValuesDetails | Specifies validation data values details to include to the signature. |
XAdESPrefix | Specifies the XAdES prefix. |
XAdESv141Prefix | Specifies the XAdES v1.4.1 prefix. |
ASN1UseGlobalTagCache | Controls whether ASN.1 module should use a global object cache. |
AssignSystemSmartCardPins | Specifies whether CSP-level PINs should be assigned to CNG keys. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the component. |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
DNSLocalSuffix | The suffix to assign for TLD names. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HardwareCryptoUsePolicy | The hardware crypto usage policy. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
HttpVersion | The HTTP version to use in any inner HTTP client components created. |
IgnoreExpiredMSCTLSigningCert | Whether to tolerate the expired Windows Update signing certificate. |
ListDelimiter | The delimiter character for multi-element lists. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
OldClientSideRSAFallback | Specifies whether the SSH client should use a SHA1 fallback. |
ProductVersion | Returns the version of the SecureBlackbox library. |
ServerSSLDHKeyLength | Sets the size of the TLS DHE key exchange group. |
StaticDNS | Specifies whether static DNS rules should be used. |
StaticIPAddress[domain] | Gets or sets an IP address for the specified domain name. |
StaticIPAddresses | Gets or sets all the static DNS rules. |
Tag | Allows to store any custom data. |
TLSSessionGroup | Specifies the group name of TLS sessions to be used for session resumption. |
TLSSessionLifetime | Specifies lifetime in seconds of the cached TLS session. |
TLSSessionPurgeInterval | Specifies how often the session cache should remove the expired TLS sessions. |
UseInternalRandom | Switches between SecureBlackbox-own and platform PRNGs. |
UseLegacyAdESValidation | Enables legacy AdES validation mode. |
UseOwnDNSResolver | Specifies whether the client components should use own DNS resolver. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemNativeSizeCalculation | An internal CryptoAPI access tweak. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
AllSignaturesValid Property (ASiCVerifier Component)
The cumulative validity of all signatures.
Syntax
Default Value
False
Remarks
Use this property to check if all the signatures found in the message or document are valid.
This property is read-only and not available at design time.
AutoValidateSignatures Property (ASiCVerifier Component)
Specifies whether ASiCVerifier should validate any present signatures when the document is opened.
Syntax
Default Value
True
Remarks
This setting is switched on by default. You can choose to set this property to false in order to validate the signatures manually on a later stage using the Revalidate method.
BlockedCertificates Property (ASiCVerifier Component)
The certificates that must be rejected as trust anchors.
Syntax
public CertificateList BlockedCertificates { get; }
Public Property BlockedCertificates As CertificateList
Remarks
Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.Certificates Property (ASiCVerifier Component)
A collection of certificates included in the electronic signature.
Syntax
public CertificateList Certificates { get; }
Public ReadOnly Property Certificates As CertificateList
Remarks
This property includes a collection of certificates of the currently selected info.
This collection is indexed from 0 to count -1.
This property is read-only and not available at design time.
Please refer to the Certificate type for a complete list of fields.CheckTrustedLists Property (ASiCVerifier Component)
Specifies whether the component should attempt to validate chain trust via a known Trusted List.
Syntax
Default Value
False
Remarks
Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).
CRLs Property (ASiCVerifier Component)
A collection of certificate revocation lists embedded into the signature by the signer.
Syntax
Remarks
Use this property to access the CRLs embedded into the signature by the signer.
This property is read-only and not available at design time.
Please refer to the CRL type for a complete list of fields.ExtractionMode Property (ASiCVerifier Component)
Specifies which entries should be extracted from the container upon verification.
Syntax
public ASiCVerifierExtractionModes ExtractionMode { get; set; }
enum ASiCVerifierExtractionModes { aemNone, aemAll, aemSigned, aemSignedAndValid }
Public Property ExtractionMode As AsicverifierExtractionModes
Enum ASiCVerifierExtractionModes aemNone aemAll aemSigned aemSignedAndValid End Enum
Default Value
0
Remarks
Use this property to choose entries that should be extracted in the Verify method. Choose between extracting all files, signed-only, signed and with verified signature, and none at all (verify-only mode).
aemNone | 0 |
aemAll | 1 |
aemSigned | 2 |
aemSignedAndValid | 3 |
Files Property (ASiCVerifier Component)
Lists all files contained in the container.
Syntax
public ArchivedFileList Files { get; }
Public ReadOnly Property Files As ArchivedFileList
Remarks
Use this collection property to walk through the list of files contained in the archive.
This property is read-only and not available at design time.
Please refer to the ArchivedFile type for a complete list of fields.FIPSMode Property (ASiCVerifier Component)
Reserved.
Syntax
Default Value
False
Remarks
This property is reserved for future use.
IgnoreChainValidationErrors Property (ASiCVerifier Component)
Makes the component tolerant to chain validation errors.
Syntax
public bool IgnoreChainValidationErrors { get; set; }
Public Property IgnoreChainValidationErrors As Boolean
Default Value
False
Remarks
If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.
InputBytes Property (ASiCVerifier Component)
Use this property to pass the input to component in byte array form.
Syntax
Remarks
Assign a byte array containing the data to be processed to this property.
This property is not available at design time.
InputFile Property (ASiCVerifier Component)
A path to the ASiC container to process.
Syntax
Default Value
""
Remarks
Use this property to provide a path to the signature container. Use InputStream to provide the container from memory rather than a disk file.
InputStream Property (ASiCVerifier Component)
A stream containing ASiC data.
Syntax
public System.IO.Stream InputStream { get; set; }
Public Property InputStream As System.IO.Stream
Default Value
null
Remarks
Use this property to feed ASiC data to the component from a stream object.
This property is not available at design time.
KnownCertificates Property (ASiCVerifier Component)
Additional certificates for chain validation.
Syntax
public CertificateList KnownCertificates { get; }
Public Property KnownCertificates As CertificateList
Remarks
Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.
The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.
Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.KnownCRLs Property (ASiCVerifier Component)
Additional CRLs for chain validation.
Syntax
Remarks
Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.
This property is not available at design time.
Please refer to the CRL type for a complete list of fields.KnownOCSPs Property (ASiCVerifier Component)
Additional OCSP responses for chain validation.
Syntax
public OCSPResponseList KnownOCSPs { get; }
Public Property KnownOCSPs As OCSPResponseList
Remarks
Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.
This property is not available at design time.
Please refer to the OCSPResponse type for a complete list of fields.OCSPs Property (ASiCVerifier Component)
A collection of OCSP responses embedded into the signature.
Syntax
public OCSPResponseList OCSPs { get; }
Public ReadOnly Property OCSPs As OCSPResponseList
Remarks
Use this property to access the OCSP responses embedded into the signature by its creator.
This property is read-only and not available at design time.
Please refer to the OCSPResponse type for a complete list of fields.OfflineMode Property (ASiCVerifier Component)
Switches the component to offline mode.
Syntax
Default Value
False
Remarks
When working in offline mode, the component restricts itself from using any online revocation information sources, such as CRL or OCSP responders.
Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.
OutputBytes Property (ASiCVerifier Component)
Use this property to read the output the component object has produced.
Syntax
Remarks
Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.
This property is read-only and not available at design time.
OutputFile Property (ASiCVerifier Component)
The file where the processed data will be saved.
Syntax
Default Value
""
Remarks
Provides a path to the file where the component should save the updated container.
OutputPath Property (ASiCVerifier Component)
A local path to extract the files to.
Syntax
Default Value
""
Remarks
Assign this property with a path where the extracted files (selected according to ExtractionMode criteria) are to be saved.
OutputStream Property (ASiCVerifier Component)
The stream where the file is to be extracted.
Syntax
public System.IO.Stream OutputStream { get; set; }
Public Property OutputStream As System.IO.Stream
Default Value
null
Remarks
Use this property to specify the stream to take the data extracted from the container.
This property is not available at design time.
Profile Property (ASiCVerifier Component)
Specifies a pre-defined profile to apply when creating the signature.
Syntax
Default Value
""
Remarks
Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.
Proxy Property (ASiCVerifier Component)
The proxy server settings.
Syntax
public ProxySettings Proxy { get; }
Public ReadOnly Property Proxy As ProxySettings
Remarks
Use this property to tune up the proxy server settings.
This property is read-only.
Please refer to the ProxySettings type for a complete list of fields.RevocationCheck Property (ASiCVerifier Component)
Specifies the kind(s) of revocation check to perform for all chain certificates.
Syntax
public ASiCVerifierRevocationChecks RevocationCheck { get; set; }
enum ASiCVerifierRevocationChecks { crcNone, crcAuto, crcAllCRL, crcAllOCSP, crcAllCRLAndOCSP, crcAnyCRL, crcAnyOCSP, crcAnyCRLOrOCSP, crcAnyOCSPOrCRL }
Public Property RevocationCheck As AsicverifierRevocationChecks
Enum ASiCVerifierRevocationChecks crcNone crcAuto crcAllCRL crcAllOCSP crcAllCRLAndOCSP crcAnyCRL crcAnyOCSP crcAnyCRLOrOCSP crcAnyOCSPOrCRL End Enum
Default Value
1
Remarks
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.
crcNone | 0 | No revocation checking. |
crcAuto | 1 | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL | 2 | All provided CRL endpoints will be checked, and all checks must succeed. |
crcAllOCSP | 3 | All provided OCSP endpoints will be checked, and all checks must succeed. |
crcAllCRLAndOCSP | 4 | All provided CRL and OCSP endpoints will be checked, and all checks must succeed. |
crcAnyCRL | 5 | All provided CRL endpoints will be checked, and at least one check must succeed. |
crcAnyOCSP | 6 | All provided OCSP endpoints will be checked, and at least one check must succeed. |
crcAnyCRLOrOCSP | 7 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL | 8 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.
Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.
Signatures Property (ASiCVerifier Component)
Contains the list of signatures included in the ASiC container.
Syntax
public ASiCSignatureList Signatures { get; }
Public ReadOnly Property Signatures As ASiCSignatureList
Remarks
Use this property to access all signatures in the container.
This property is read-only and not available at design time.
Please refer to the ASiCSignature type for a complete list of fields.SocketSettings Property (ASiCVerifier Component)
Manages network connection settings.
Syntax
public SocketSettings SocketSettings { get; }
Public ReadOnly Property SocketSettings As SocketSettings
Remarks
Use this property to tune up network connection parameters.
This property is read-only.
Please refer to the SocketSettings type for a complete list of fields.Timestamps Property (ASiCVerifier Component)
Contains a collection of timestamps for the processed document.
Syntax
public TimestampInfoList Timestamps { get; }
Public ReadOnly Property Timestamps As TimestampInfoList
Remarks
Use this property to access the timestamps included in the processed document.
This property is read-only and not available at design time.
Please refer to the TimestampInfo type for a complete list of fields.TLSClientChain Property (ASiCVerifier Component)
The TLS client certificate chain.
Syntax
public CertificateList TLSClientChain { get; }
Public Property TLSClientChain As CertificateList
Remarks
Assign a certificate chain to this property to enable TLS client authentication in the component. Note that the client's end-entity certificate should have a private key associated with it.
Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.TLSServerChain Property (ASiCVerifier Component)
The TLS server's certificate chain.
Syntax
public CertificateList TLSServerChain { get; }
Public ReadOnly Property TLSServerChain As CertificateList
Remarks
Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.
This property is read-only and not available at design time.
Please refer to the Certificate type for a complete list of fields.TLSSettings Property (ASiCVerifier Component)
Manages TLS layer settings.
Syntax
public TLSSettings TLSSettings { get; }
Public ReadOnly Property TLSSettings As TLSSettings
Remarks
Use this property to tune up the TLS layer parameters.
This property is read-only.
Please refer to the TLSSettings type for a complete list of fields.TrustedCertificates Property (ASiCVerifier Component)
A list of trusted certificates for chain validation.
Syntax
public CertificateList TrustedCertificates { get; }
Public Property TrustedCertificates As CertificateList
Remarks
Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.
The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.
Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.ValidationMoment Property (ASiCVerifier Component)
The time point at which signature validity is to be established.
Syntax
Default Value
""
Remarks
Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).
The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.
Close Method (ASiCVerifier Component)
Closes an opened container.
Syntax
Remarks
Use this method to close a previously opened container. Set SaveChanges to true to apply any changes made.
Config Method (ASiCVerifier Component)
Sets or retrieves a configuration setting.
Syntax
Remarks
Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
DoAction Method (ASiCVerifier Component)
Performs an additional action.
Syntax
Remarks
DoAction is a generic method available in every component. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier (case insensitive) of the action is provided in the ActionID parameter.
ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
ExtractFile Method (ASiCVerifier Component)
Extracts a file to one of the output media (bytes, stream, or disk file).
Syntax
Remarks
Use this method to extract a single archived
ExtractFiles Method (ASiCVerifier Component)
Extracts files covered by a signature to OutputPath .
Syntax
Remarks
Use this method to extract all files covered by the signature SigLabel to OutputPath. Set SigLabel to "" to extract all the files included in the container.
Open Method (ASiCVerifier Component)
Opens an existing container for signing or updating.
Syntax
public void Open();
Public Sub Open()
Remarks
Use this method to open a container for signing or updating. When finished, call Close to complete or discard the operation.
Reset Method (ASiCVerifier Component)
Resets the component settings.
Syntax
public void Reset();
Public Sub Reset()
Remarks
Reset is a generic method available in every component.
Revalidate Method (ASiCVerifier Component)
Revalidates a signature in accordance with current settings.
Syntax
Remarks
Use this method to re-validate a signature in the opened ASiC document.
SelectInfo Method (ASiCVerifier Component)
Select signature information for a specific entity.
Syntax
Remarks
Use this method to select (or filter) signature-related information for a specific signature element.
Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:
sitEntity | 1 | Select the current entity |
sitParentEntity | 2 | Select the parent entity of the current entity |
sitTimestamps | 4 | Select all timestamps covering the current entity |
sitSignatures | 8 | Select all signatures covering the current entity |
sitSigningChain | 16 | Select the signing chain of the current entity |
sitEmbeddedCertificates | 256 | Select all certificates embedded in the current entity |
sitEmbeddedCRLs | 512 | Select all CRLs embedded in the current entity |
sitEmbeddedOCSPs | 1024 | Select all OCSP responses embedded in the current entity |
sitEmbeddedRevInfo | 1792 | Select the whole pack of embedded revocation information (certificates, CRLs and OCSPs) |
sitUsedCertificates | 4096 | Select all the certificates used to validate this entity's chain |
sitUsedCRLs | 8192 | Select all the CRLs used to validate this entity's chain |
sitUsedOCSPs | 16384 | Select all the OCSP responses used to validate this entity's chain |
sitUsedRevInfo | 28672 | Select the whole pack of revocation information used to validate this entity's chain (certificates, CRLs, OCSP responses) |
sitAttributes | 65536 | Select this entity's CMS attributes |
sitReferences | 131072 | Select this entity's XML references |
sitSignedParts | 262144 | Select this entity's signed parts |
Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to SelectInfo and keeping ClearSelection set to false.
This method is useful if you would like to read/display detailed information about a particular signature or timestamp.
Unsign Method (ASiCVerifier Component)
Deletes a signature from the container.
Syntax
Remarks
Use this method to delete an existing signature from the container. Use SigLabel parameter to specify the signature to be removed.
Verify Method (ASiCVerifier Component)
Verifies all signatures in the ASiC container.
Syntax
public void Verify();
Public Sub Verify()
Remarks
Use this method to verify the signature and any associated signed files residing in the ASiC container.
When processing the container, the verifier walks through all the signatures contained in the message, one after another.
For each signature, the SignatureFound event is thrown. The benefits of this are that it:
- Lets you know some basic details about the signature and its creator
- Allows you to tell the component whether or not you want to validate it and/or its signing certificate's chain
- Gives you a chance to provide any missing certificates (CertFound indicates whether you need to do that)
The control's properties remain assigned with the last processed signature's details, and are still available after the Verify() call returns, providing a handy way to work with single-signature containers.
Once the main signature's processing completes, the control proceeds to its subordinate elements (countersignatures and/or timestamps). Each timestamp is reported via TimestampValidated event.
Having reported all the countersignatures and timestamps, the control proceeds to the next main signature and any timestamps associated with it - and so on.
ChainElementDownload Event (ASiCVerifier Component)
Fires when there is a need to download a chain element from an online source.
Syntax
public event OnChainElementDownloadHandler OnChainElementDownload; public delegate void OnChainElementDownloadHandler(object sender, ASiCVerifierChainElementDownloadEventArgs e); public class ASiCVerifierChainElementDownloadEventArgs : EventArgs { public int Kind { get; } public string CertRDN { get; } public string CACertRDN { get; } public string Location { get; } public int Action { get; set; } }
Public Event OnChainElementDownload As OnChainElementDownloadHandler Public Delegate Sub OnChainElementDownloadHandler(sender As Object, e As ASiCVerifierChainElementDownloadEventArgs) Public Class ASiCVerifierChainElementDownloadEventArgs Inherits EventArgs Public ReadOnly Property Kind As Integer Public ReadOnly Property CertRDN As String Public ReadOnly Property CACertRDN As String Public ReadOnly Property Location As String Public Property Action As Integer End Class
Remarks
Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.
veaAuto | 0 | Handle the action automatically (the default behaviour) |
veaContinue | 1 | Accept the request implied by the event (accept the certificate, allow the object retrieval) |
veaReject | 2 | Reject the request implied by the event (reject the certificate, disallow the object retrieval) |
veaAcceptNow | 3 | Accept the validated certificate immediately |
veaAbortNow | 4 | Abort the validation, reject the certificate |
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainElementNeeded Event (ASiCVerifier Component)
Fires when an element required to validate the chain was not located.
Syntax
public event OnChainElementNeededHandler OnChainElementNeeded; public delegate void OnChainElementNeededHandler(object sender, ASiCVerifierChainElementNeededEventArgs e); public class ASiCVerifierChainElementNeededEventArgs : EventArgs { public int Kind { get; } public string CertRDN { get; } public string CACertRDN { get; } }
Public Event OnChainElementNeeded As OnChainElementNeededHandler Public Delegate Sub OnChainElementNeededHandler(sender As Object, e As ASiCVerifierChainElementNeededEventArgs) Public Class ASiCVerifierChainElementNeededEventArgs Inherits EventArgs Public ReadOnly Property Kind As Integer Public ReadOnly Property CertRDN As String Public ReadOnly Property CACertRDN As String End Class
Remarks
Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainElementStore Event (ASiCVerifier Component)
This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.
Syntax
public event OnChainElementStoreHandler OnChainElementStore; public delegate void OnChainElementStoreHandler(object sender, ASiCVerifierChainElementStoreEventArgs e); public class ASiCVerifierChainElementStoreEventArgs : EventArgs { public int Kind { get; } public byte[] Body { get; } public string URI { get; set; } }
Public Event OnChainElementStore As OnChainElementStoreHandler Public Delegate Sub OnChainElementStoreHandler(sender As Object, e As ASiCVerifierChainElementStoreEventArgs) Public Class ASiCVerifierChainElementStoreEventArgs Inherits EventArgs Public ReadOnly Property Kind As Integer Public ReadOnly Property Body As Byte() Public Property URI As String End Class
Remarks
This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainValidated Event (ASiCVerifier Component)
Reports the completion of a certificate chain validation.
Syntax
public event OnChainValidatedHandler OnChainValidated; public delegate void OnChainValidatedHandler(object sender, ASiCVerifierChainValidatedEventArgs e); public class ASiCVerifierChainValidatedEventArgs : EventArgs { public int Index { get; } public string EntityLabel { get; } public string SubjectRDN { get; } public int ValidationResult { get; } public int ValidationDetails { get; } public bool Cancel { get; set; } }
Public Event OnChainValidated As OnChainValidatedHandler Public Delegate Sub OnChainValidatedHandler(sender As Object, e As ASiCVerifierChainValidatedEventArgs) Public Class ASiCVerifierChainValidatedEventArgs Inherits EventArgs Public ReadOnly Property Index As Integer Public ReadOnly Property EntityLabel As String Public ReadOnly Property SubjectRDN As String Public ReadOnly Property ValidationResult As Integer Public ReadOnly Property ValidationDetails As Integer Public Property Cancel As Boolean End Class
Remarks
This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.
ValidationResult set to 0 (zero) indicates successful chain validation.
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationProgress Event (ASiCVerifier Component)
This event is fired multiple times during chain validation to report various stages of the validation procedure.
Syntax
public event OnChainValidationProgressHandler OnChainValidationProgress; public delegate void OnChainValidationProgressHandler(object sender, ASiCVerifierChainValidationProgressEventArgs e); public class ASiCVerifierChainValidationProgressEventArgs : EventArgs { public string EventKind { get; } public string CertRDN { get; } public string CACertRDN { get; } public int Action { get; set; } }
Public Event OnChainValidationProgress As OnChainValidationProgressHandler Public Delegate Sub OnChainValidationProgressHandler(sender As Object, e As ASiCVerifierChainValidationProgressEventArgs) Public Class ASiCVerifierChainValidationProgressEventArgs Inherits EventArgs Public ReadOnly Property EventKind As String Public ReadOnly Property CertRDN As String Public ReadOnly Property CACertRDN As String Public Property Action As Integer End Class
Remarks
Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.
The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.
veaAuto | 0 | Handle the action automatically (the default behaviour) |
veaContinue | 1 | Accept the request implied by the event (accept the certificate, allow the object retrieval) |
veaReject | 2 | Reject the request implied by the event (reject the certificate, disallow the object retrieval) |
veaAcceptNow | 3 | Accept the validated certificate immediately |
veaAbortNow | 4 | Abort the validation, reject the certificate |
ContainerLoaded Event (ASiCVerifier Component)
This event is fired when the container has been loaded into memory.
Syntax
public event OnContainerLoadedHandler OnContainerLoaded; public delegate void OnContainerLoadedHandler(object sender, ASiCVerifierContainerLoadedEventArgs e); public class ASiCVerifierContainerLoadedEventArgs : EventArgs { public bool Cancel { get; set; } }
Public Event OnContainerLoaded As OnContainerLoadedHandler Public Delegate Sub OnContainerLoadedHandler(sender As Object, e As ASiCVerifierContainerLoadedEventArgs) Public Class ASiCVerifierContainerLoadedEventArgs Inherits EventArgs Public Property Cancel As Boolean End Class
Remarks
The handler for this event is a good place to check for any existing signatures and validate them if required.
Set Cancel to true to terminate document processing on this stage.
Error Event (ASiCVerifier Component)
Information about errors during ASiC signature verification.
Syntax
public event OnErrorHandler OnError; public delegate void OnErrorHandler(object sender, ASiCVerifierErrorEventArgs e); public class ASiCVerifierErrorEventArgs : EventArgs { public int ErrorCode { get; } public string Description { get; } }
Public Event OnError As OnErrorHandler Public Delegate Sub OnErrorHandler(sender As Object, e As ASiCVerifierErrorEventArgs) Public Class ASiCVerifierErrorEventArgs Inherits EventArgs Public ReadOnly Property ErrorCode As Integer Public ReadOnly Property Description As String End Class
Remarks
The event is fired in case of exceptional conditions during ASiC signature verification.
ErrorCode contains an error code and Description contains a textual description of the error.
FileExtractionStart Event (ASiCVerifier Component)
Signifies the start of a file extraction process.
Syntax
public event OnFileExtractionStartHandler OnFileExtractionStart; public delegate void OnFileExtractionStartHandler(object sender, ASiCVerifierFileExtractionStartEventArgs e); public class ASiCVerifierFileExtractionStartEventArgs : EventArgs { public string FileName { get; } public long FileSize { get; } public string ModDate { get; } public bool Extract { get; set; } public string DestFile { get; set; } }
Public Event OnFileExtractionStart As OnFileExtractionStartHandler Public Delegate Sub OnFileExtractionStartHandler(sender As Object, e As ASiCVerifierFileExtractionStartEventArgs) Public Class ASiCVerifierFileExtractionStartEventArgs Inherits EventArgs Public ReadOnly Property FileName As String Public ReadOnly Property FileSize As Long Public ReadOnly Property ModDate As String Public Property Extract As Boolean Public Property DestFile As String End Class
Remarks
This event fires for every file located in the archive and matching the ExtractionMode setting before it is to be extracted.
DestFile indicates the path where the file will be saved to. You can alter the destination path here, by providing an alternative extraction path.
Set DestFile to an empty string and provide a stream object via the OutputStream property if you prefer to save the data to a stream instead of file.
If DestFile is set to an empty string and OutputStream is unassigned, the file will not be extracted.
Alternatively, you can request the extracted content to be saved into a byte array. To do this, leave DestFile and OutputStream empty, and keep the Extract parameter enabled.
Please take care when extracting large files into byte arrays, as those may consume large amounts of memory.
Note: if DestFile already exists, the component will overwrite it. To prevent overwriting of existing files, subscribe to this event, and change DestFile when needed.
Notification Event (ASiCVerifier Component)
This event notifies the application about an underlying control flow event.
Syntax
public event OnNotificationHandler OnNotification; public delegate void OnNotificationHandler(object sender, ASiCVerifierNotificationEventArgs e); public class ASiCVerifierNotificationEventArgs : EventArgs { public string EventID { get; } public string EventParam { get; } }
Public Event OnNotification As OnNotificationHandler Public Delegate Sub OnNotificationHandler(sender As Object, e As ASiCVerifierNotificationEventArgs) Public Class ASiCVerifierNotificationEventArgs Inherits EventArgs Public ReadOnly Property EventID As String Public ReadOnly Property EventParam As String End Class
Remarks
The component fires this event to let the application know about some event, occurrence, or milestone in the component. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the component, the exact action it is performing, or the document being processed, one or both may be omitted.
This component can fire this event with the following EventID values:
ContainerLoaded | Notifies the application that the ASiC container has been loaded. This is a backward-compatibility-only notification: use OnContainerLoaded event instead. |
RetrieveQualifyingProperties | TBD |
BeforeTimestamp | This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings. |
TimestampError | This event is only fired if the component failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info. |
TimestampRequest | A timestamp is requested from the custom timestamping
authority. This event is only fired if TimestampServer was set to a
virtual:// URI. The EventParam parameter contains the
TSP request (or the plain hash, depending on the value provided to
TimestampServer), in base16, that needs to be sent to the TSA.
Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property. |
SignatureFound Event (ASiCVerifier Component)
Signifies the start of signature validation.
Syntax
public event OnSignatureFoundHandler OnSignatureFound; public delegate void OnSignatureFoundHandler(object sender, ASiCVerifierSignatureFoundEventArgs e); public class ASiCVerifierSignatureFoundEventArgs : EventArgs { public int Index { get; } public string EntityLabel { get; } public string IssuerRDN { get; } public byte[] SerialNumber { get; } public byte[] SubjectKeyID { get; } public bool CertFound { get; } public bool ValidateSignature { get; set; } public bool ValidateChain { get; set; } }
Public Event OnSignatureFound As OnSignatureFoundHandler Public Delegate Sub OnSignatureFoundHandler(sender As Object, e As ASiCVerifierSignatureFoundEventArgs) Public Class ASiCVerifierSignatureFoundEventArgs Inherits EventArgs Public ReadOnly Property Index As Integer Public ReadOnly Property EntityLabel As String Public ReadOnly Property IssuerRDN As String Public ReadOnly Property SerialNumber As Byte() Public ReadOnly Property SubjectKeyID As Byte() Public ReadOnly Property CertFound As Boolean Public Property ValidateSignature As Boolean Public Property ValidateChain As Boolean End Class
Remarks
This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.
The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.
Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the SignatureValidationResult and ChainValidationResult properties respectively.
Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.
SignatureValidated Event (ASiCVerifier Component)
Marks the completion of the signature validation routine.
Syntax
public event OnSignatureValidatedHandler OnSignatureValidated; public delegate void OnSignatureValidatedHandler(object sender, ASiCVerifierSignatureValidatedEventArgs e); public class ASiCVerifierSignatureValidatedEventArgs : EventArgs { public int Index { get; } public string EntityLabel { get; } public string IssuerRDN { get; } public byte[] SerialNumber { get; } public byte[] SubjectKeyID { get; } public int ValidationResult { get; } public bool Cancel { get; set; } }
Public Event OnSignatureValidated As OnSignatureValidatedHandler Public Delegate Sub OnSignatureValidatedHandler(sender As Object, e As ASiCVerifierSignatureValidatedEventArgs) Public Class ASiCVerifierSignatureValidatedEventArgs Inherits EventArgs Public ReadOnly Property Index As Integer Public ReadOnly Property EntityLabel As String Public ReadOnly Property IssuerRDN As String Public ReadOnly Property SerialNumber As Byte() Public ReadOnly Property SubjectKeyID As Byte() Public ReadOnly Property ValidationResult As Integer Public Property Cancel As Boolean End Class
Remarks
This event is fired upon the completion of the signature validation routine, and reports the respective validation result.
Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.
ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
TimestampFound Event (ASiCVerifier Component)
Signifies the start of a timestamp validation routine.
Syntax
public event OnTimestampFoundHandler OnTimestampFound; public delegate void OnTimestampFoundHandler(object sender, ASiCVerifierTimestampFoundEventArgs e); public class ASiCVerifierTimestampFoundEventArgs : EventArgs { public int Index { get; } public string EntityLabel { get; } public string IssuerRDN { get; } public byte[] SerialNumber { get; } public byte[] SubjectKeyID { get; } public bool CertFound { get; } public bool ValidateTimestamp { get; set; } public bool ValidateChain { get; set; } }
Public Event OnTimestampFound As OnTimestampFoundHandler Public Delegate Sub OnTimestampFoundHandler(sender As Object, e As ASiCVerifierTimestampFoundEventArgs) Public Class ASiCVerifierTimestampFoundEventArgs Inherits EventArgs Public ReadOnly Property Index As Integer Public ReadOnly Property EntityLabel As String Public ReadOnly Property IssuerRDN As String Public ReadOnly Property SerialNumber As Byte() Public ReadOnly Property SubjectKeyID As Byte() Public ReadOnly Property CertFound As Boolean Public Property ValidateTimestamp As Boolean Public Property ValidateChain As Boolean End Class
Remarks
This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.
The CertFound parameter is set to True if the component has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.
Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the ValidationResult and ChainValidationResult properties respectively.
Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.
TimestampValidated Event (ASiCVerifier Component)
Reports the completion of the timestamp validation routine.
Syntax
public event OnTimestampValidatedHandler OnTimestampValidated; public delegate void OnTimestampValidatedHandler(object sender, ASiCVerifierTimestampValidatedEventArgs e); public class ASiCVerifierTimestampValidatedEventArgs : EventArgs { public int Index { get; } public string EntityLabel { get; } public string IssuerRDN { get; } public byte[] SerialNumber { get; } public byte[] SubjectKeyID { get; } public string Time { get; } public int ValidationResult { get; } public int ChainValidationResult { get; } public int ChainValidationDetails { get; } public bool Cancel { get; set; } }
Public Event OnTimestampValidated As OnTimestampValidatedHandler Public Delegate Sub OnTimestampValidatedHandler(sender As Object, e As ASiCVerifierTimestampValidatedEventArgs) Public Class ASiCVerifierTimestampValidatedEventArgs Inherits EventArgs Public ReadOnly Property Index As Integer Public ReadOnly Property EntityLabel As String Public ReadOnly Property IssuerRDN As String Public ReadOnly Property SerialNumber As Byte() Public ReadOnly Property SubjectKeyID As Byte() Public ReadOnly Property Time As String Public ReadOnly Property ValidationResult As Integer Public ReadOnly Property ChainValidationResult As Integer Public ReadOnly Property ChainValidationDetails As Integer Public Property Cancel As Boolean End Class
Remarks
This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.
ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
TLSCertNeeded Event (ASiCVerifier Component)
Fires when a remote TLS party requests a client certificate.
Syntax
public event OnTLSCertNeededHandler OnTLSCertNeeded; public delegate void OnTLSCertNeededHandler(object sender, ASiCVerifierTLSCertNeededEventArgs e); public class ASiCVerifierTLSCertNeededEventArgs : EventArgs { public string Host { get; } public string CANames { get; } }
Public Event OnTLSCertNeeded As OnTLSCertNeededHandler Public Delegate Sub OnTLSCertNeededHandler(sender As Object, e As ASiCVerifierTLSCertNeededEventArgs) Public Class ASiCVerifierTLSCertNeededEventArgs Inherits EventArgs Public ReadOnly Property Host As String Public ReadOnly Property CANames As String End Class
Remarks
This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.
Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.
This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.
TLSCertValidate Event (ASiCVerifier Component)
This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
Syntax
public event OnTLSCertValidateHandler OnTLSCertValidate; public delegate void OnTLSCertValidateHandler(object sender, ASiCVerifierTLSCertValidateEventArgs e); public class ASiCVerifierTLSCertValidateEventArgs : EventArgs { public string ServerHost { get; } public string ServerIP { get; } public bool Accept { get; set; } }
Public Event OnTLSCertValidate As OnTLSCertValidateHandler Public Delegate Sub OnTLSCertValidateHandler(sender As Object, e As ASiCVerifierTLSCertValidateEventArgs) Public Class ASiCVerifierTLSCertValidateEventArgs Inherits EventArgs Public ReadOnly Property ServerHost As String Public ReadOnly Property ServerIP As String Public Property Accept As Boolean End Class
Remarks
This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, components may contact a number of TLS endpoints during their work, depending on their configuration.
Accept is assigned in accordance with the outcome of the internal validation check performed by the component, and can be adjusted if needed.
TLSEstablished Event (ASiCVerifier Component)
Fires when a TLS handshake with Host successfully completes.
Syntax
public event OnTLSEstablishedHandler OnTLSEstablished; public delegate void OnTLSEstablishedHandler(object sender, ASiCVerifierTLSEstablishedEventArgs e); public class ASiCVerifierTLSEstablishedEventArgs : EventArgs { public string Host { get; } public string Version { get; } public string Ciphersuite { get; } public byte[] ConnectionId { get; } public bool Abort { get; set; } }
Public Event OnTLSEstablished As OnTLSEstablishedHandler Public Delegate Sub OnTLSEstablishedHandler(sender As Object, e As ASiCVerifierTLSEstablishedEventArgs) Public Class ASiCVerifierTLSEstablishedEventArgs Inherits EventArgs Public ReadOnly Property Host As String Public ReadOnly Property Version As String Public ReadOnly Property Ciphersuite As String Public ReadOnly Property ConnectionId As Byte() Public Property Abort As Boolean End Class
Remarks
The component uses this event to notify the application about a successful completion of a TLS handshake.
The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.
TLSHandshake Event (ASiCVerifier Component)
Fires when a new TLS handshake is initiated, before the handshake commences.
Syntax
public event OnTLSHandshakeHandler OnTLSHandshake; public delegate void OnTLSHandshakeHandler(object sender, ASiCVerifierTLSHandshakeEventArgs e); public class ASiCVerifierTLSHandshakeEventArgs : EventArgs { public string Host { get; } public bool Abort { get; set; } }
Public Event OnTLSHandshake As OnTLSHandshakeHandler Public Delegate Sub OnTLSHandshakeHandler(sender As Object, e As ASiCVerifierTLSHandshakeEventArgs) Public Class ASiCVerifierTLSHandshakeEventArgs Inherits EventArgs Public ReadOnly Property Host As String Public Property Abort As Boolean End Class
Remarks
The component uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.
TLSShutdown Event (ASiCVerifier Component)
Reports the graceful closure of a TLS connection.
Syntax
public event OnTLSShutdownHandler OnTLSShutdown; public delegate void OnTLSShutdownHandler(object sender, ASiCVerifierTLSShutdownEventArgs e); public class ASiCVerifierTLSShutdownEventArgs : EventArgs { public string Host { get; } }
Public Event OnTLSShutdown As OnTLSShutdownHandler Public Delegate Sub OnTLSShutdownHandler(sender As Object, e As ASiCVerifierTLSShutdownEventArgs) Public Class ASiCVerifierTLSShutdownEventArgs Inherits EventArgs Public ReadOnly Property Host As String End Class
Remarks
This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.
ArchivedFile Type
Provides information about the compressed file.
Remarks
Use this type to access compressed file details.
Fields
Action
Actions
Default: 0
The action to apply to the file.
Use this property to control the action that should be applied to the file during the compression or extraction. The following actions are supported:
atAdd (0) | Add the file to the archive |
atKeep (1) | Keep the existing file in the archive |
atUpdate (2) | Update the archived file with a fresher copy |
atDelete (3) | Delete the file from the archive |
atExtract (4) | Extract the file (extraction only) |
atSkip (5) | Skip file extraction (extraction only) |
Attributes
string
Default: ""
Provides access to file attributes.
ZIP archives support provision of Windows (or DOS, as they are called historically) or Unix file attributes. Use this property to provide the attributes or read them out of an existing archive.
Use "dos:" or "unix:" prefixes to indicate what kind of attributes you need to include:
Writer.Files[0].Attributes = "unix:-rwxr-xr-x";
Writer.Files[1].Attributes = "unix:-r--r--r--";
Writer.Files[2].Attributes = "dos:readonly";
Writer.Files[3].Attributes = "dos:readonly;hidden"; // supported values: readonly, hidden, system, volumeLabel, directory, archive
CompressedSize
long (read-only)
Default: 0
The size of the file after compression.
DataSource
FileDataSources
Default: 0
The type of the data source for this entry.
Use this property to control the data source for this entry.
fdsFile (0) | The data for this entry should be taken from the file provided via LocalPath. |
fdsStream (1) | The data is going to be provided on-the-fly via the FileStream property. |
fdsBuffer (2) | The data is going to be provided on-the-fly via the FileData property. |
Directory
bool (read-only)
Default: False
Tells if the entry is a directory or a regular file.
EncryptionAlgorithm
string (read-only)
Default: ""
Returns the symmetric algorithm that was used to encrypt the file.
EncryptionKeyLength
int (read-only)
Default: 0
Returns the length, in bits, of the encryption key.
EncryptionType
EncryptionTypes (read-only)
Default: 0
The type of encryption applied to the file.
Use this property to find out what kind of encryption was applied to the file.
aetDefault (0) | Default encryption (not used for already encrypted files) |
aetNoEncryption (1) | No encryption |
aetGeneric (2) | Standard ZIP encryption |
aetWinZip (3) | WinZIP-based encryption |
aetStrong (4) | Strong encryption |
FileName
string
Default: ""
The original name of the compressed file or folder.
Folder
string (read-only)
Default: ""
The containing folder of the entry.
LocalPath
string
Default: ""
The local path associated with this entry. It typically specifies the source path that the data should be taken from, or the destination it should be extracted to.
MTime
string
Default: ""
The entry's last modification time.
NewFile
bool (read-only)
Default: False
Indicates whether the entry corresponds to a file to be added to the archive.
Path
string (read-only)
Default: ""
The full internal path of the archived entry.
SignatureCount
int (read-only)
Default: 0
The number of signatures covering the entry.
Signed
bool (read-only)
Default: False
Indicates whether the entry is signed.
Size
long (read-only)
Default: 0
The size of the file before compression.
Constructors
public ArchivedFile();
Public ArchivedFile()
Creates a new ArchivedFile object.
ASiCSignature Type
Represents a signature in the ASiC container.
Remarks
This type contains information about a signature found in ASiC container. It holds various information about the signature, including its coverage and validation results.
An ASiC-S container can include one CAdES, and/or one XAdES, and/or one Timestamp. An ASiC-E container can include multiple CAdES signatures, XAdES signatures, and timestamp tokens.
Fields
ChainValidationDetails
int (read-only)
Default: 0
The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationResult
ChainValidities (read-only)
Default: 0
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
ClaimedSigningTime
string
Default: ""
Returns or sets signature's creation time.
Use this property to get or set the signature creation time from the signer's computer. The claimed time, unlike ValidatedSigningTime does not originate from a trusted TSA and may be forfeited or wrong.
The time is provided in UTC.
CompatibilityErrors
int (read-only)
Default: 0
Returns compatibility errors encountered during validation.
Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.
ContainsLongTermInfo
bool (read-only)
Default: False
Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
ContentType
string
Default: ""
The signature content type.
Use this property to get or set the content type OID to be included with the signature.
EntityLabel
string (read-only)
Default: ""
Use this property to get the signature entity label.
This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.
FileName
string
Default: ""
The name of the ASiC signature file.
HashAlgorithm
string
Default: ""
Set or returns the hash algorithm used to generate the signature.
Check this property after verifying the signature to get the hash algorithm which was used to calculate it. When creating a signed file, use this property to specify the hash algorithm to use.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
IssuerRDN
string (read-only)
Default: ""
The Relative Distinguished Name of the signing certificate's issuer.
A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.
Level
AdESSignatureLevels
Default: 2
Specifies the level according to which the inner AdES signature is to be composed
CAdES and XAdES standards define a number of signature levels. The main differences between levels are in the scope of validation information included to the signature. BES signatures only include the most necessary information (the signing chain), whereas XL and A signatures include the complete set.
The supported levels are:
aslUnknown | 0 | Unknown signature level |
aslGeneric | 1 | Generic (this value applicable to XAdES signature only and corresponds to XML-DSIG signature) |
aslBaselineB | 2 | Baseline B (B-B, basic) |
aslBaselineT | 3 | Baseline T (B-T, timestamped) |
aslBaselineLT | 4 | Baseline LT (B-LT, long-term) |
aslBaselineLTA | 5 | Baseline LTA (B-LTA, long-term with archived timestamp) |
aslBES | 6 | BES (Basic Electronic Signature) |
aslEPES | 7 | EPES (Electronic Signature with an Explicit Policy) |
aslT | 8 | T (Timestamped) |
aslC | 9 | C (T with revocation references) |
aslX | 10 | X (C with SigAndRefs timestamp or RefsOnly timestamp) (this value applicable to XAdES signature only) |
aslXType1 | 11 | X Type 1 (C with an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXType2 | 12 | X Type 2 (C with a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslXL | 13 | X-L (X with revocation values) (this value applicable to XAdES signature only) |
aslXLType1 | 14 | X-L Type 1 (C with revocation values and an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXLType2 | 15 | X-L Type 2 (C with revocation values and a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslA | 16 | A (archived) |
aslExtendedBES | 17 | Extended BES |
aslExtendedEPES | 18 | Extended EPES |
aslExtendedT | 19 | Extended T |
aslExtendedC | 20 | Extended C |
aslExtendedX | 21 | Extended X (this value applicable to XAdES signature only) |
aslExtendedXType1 | 22 | Extended X (type 1) (this value applicable to CAdES signature only) |
aslExtendedXType2 | 23 | Extended X (type 2) (this value applicable to CAdES signature only) |
aslExtendedXLong | 24 | Extended X-Long (this value applicable to XAdES signature only) |
aslExtendedXL | 25 | Extended X-L (this value applicable to XAdES signature only) |
aslExtendedXLType1 | 26 | Extended XL (type 1) (this value applicable to CAdES signature only) |
aslExtendedXLType2 | 27 | Extended XL (type 2) (this value applicable to CAdES signature only) |
aslExtendedA | 28 | Extended A |
PolicyHash
string
Default: ""
The signature policy hash value.
Use this property to get the signature policy hash from EPES signatures
PolicyHashAlgorithm
string
Default: ""
The algorithm that was used to calculate the signature policy hash
Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from PolicyHash.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
PolicyID
string
Default: ""
The policy ID that was included or to be included into the signature.
Use this property to retrieve the signature policy identifier from EPES signatures.
PolicyURI
string
Default: ""
The signature policy URI that was included in the signature.
Use this property to set or retrieve the URI of the signature policy from EPES signatures.
SerialNumber
byte[] (read-only)
Default: ""
The serial number of the signing certificate.
SignatureBytes
byte[] (read-only)
Default: ""
Returns the binary representation of the ASiC signature.
SignatureType
ASiCSignatureTypes
Default: 0
The type of the ASiC signature: CAdES, XAdES, timestamp, or unknown.
castUnknown | 0 |
castCAdES | 1 |
castXAdES | 2 |
castTimestamp | 3 |
SignatureValidationResult
SignatureValidities (read-only)
Default: 0
The outcome of the cryptographic signature validation.
The following signature validity values are supported:
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
SignedFiles
string (read-only)
Default: ""
Contains a comma-separated list of files that are covered by the signature.
SubjectKeyID
byte[] (read-only)
Default: ""
Contains the subject key identifier of the signing certificate.
Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.
SubjectRDN
string (read-only)
Default: ""
Contains the RDN of the owner of the signing certificate.
RDN is a number of OID=Value pairs declared in the certificate and providing the owner's details.
Timestamped
bool (read-only)
Default: False
Use this property to establish whether the signature contains an embedded timestamp.
ValidatedSigningTime
string (read-only)
Default: ""
Contains the certified signing time.
Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.
ClaimedSigningTime returns a non-trusted signing time from the signer's computer.
Both times are in UTC.
ValidationLog
string (read-only)
Default: ""
Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.
Constructors
public ASiCSignature();
Public ASiCSignature()
Creates a new empty ASiC signature object.
Certificate Type
Encapsulates an individual X.509 certificate.
Remarks
This type keeps and provides access to X.509 certificate details.
Fields
Bytes
byte[] (read-only)
Default: ""
Returns the raw certificate data in DER format.
CA
bool
Default: False
Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.
Set this field when generating a new certificate to have its Basic Constraints extension generated automatically.
CAKeyID
byte[] (read-only)
Default: ""
A unique identifier (fingerprint) of the CA certificate's cryptographic key.
Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.
This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the SubjectKeyID setting, and for lower-level certificates, from the parent certificate's subject key ID extension.
CertType
CertTypes (read-only)
Default: 0
Returns the type of the entity contained in the Certificate object.
A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.
Use the CertificateManager component to load or create new certificate and certificate requests objects.
CRLDistributionPoints
string
Default: ""
Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.
Use this field when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.
The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.
Curve
string
Default: ""
Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.
SB_EC_SECP112R1 | SECP112R1 | |
SB_EC_SECP112R2 | SECP112R2 | |
SB_EC_SECP128R1 | SECP128R1 | |
SB_EC_SECP128R2 | SECP128R2 | |
SB_EC_SECP160K1 | SECP160K1 | |
SB_EC_SECP160R1 | SECP160R1 | |
SB_EC_SECP160R2 | SECP160R2 | |
SB_EC_SECP192K1 | SECP192K1 | |
SB_EC_SECP192R1 | SECP192R1 | |
SB_EC_SECP224K1 | SECP224K1 | |
SB_EC_SECP224R1 | SECP224R1 | |
SB_EC_SECP256K1 | SECP256K1 | |
SB_EC_SECP256R1 | SECP256R1 | |
SB_EC_SECP384R1 | SECP384R1 | |
SB_EC_SECP521R1 | SECP521R1 | |
SB_EC_SECT113R1 | SECT113R1 | |
SB_EC_SECT113R2 | SECT113R2 | |
SB_EC_SECT131R1 | SECT131R1 | |
SB_EC_SECT131R2 | SECT131R2 | |
SB_EC_SECT163K1 | SECT163K1 | |
SB_EC_SECT163R1 | SECT163R1 | |
SB_EC_SECT163R2 | SECT163R2 | |
SB_EC_SECT193R1 | SECT193R1 | |
SB_EC_SECT193R2 | SECT193R2 | |
SB_EC_SECT233K1 | SECT233K1 | |
SB_EC_SECT233R1 | SECT233R1 | |
SB_EC_SECT239K1 | SECT239K1 | |
SB_EC_SECT283K1 | SECT283K1 | |
SB_EC_SECT283R1 | SECT283R1 | |
SB_EC_SECT409K1 | SECT409K1 | |
SB_EC_SECT409R1 | SECT409R1 | |
SB_EC_SECT571K1 | SECT571K1 | |
SB_EC_SECT571R1 | SECT571R1 | |
SB_EC_PRIME192V1 | PRIME192V1 | |
SB_EC_PRIME192V2 | PRIME192V2 | |
SB_EC_PRIME192V3 | PRIME192V3 | |
SB_EC_PRIME239V1 | PRIME239V1 | |
SB_EC_PRIME239V2 | PRIME239V2 | |
SB_EC_PRIME239V3 | PRIME239V3 | |
SB_EC_PRIME256V1 | PRIME256V1 | |
SB_EC_C2PNB163V1 | C2PNB163V1 | |
SB_EC_C2PNB163V2 | C2PNB163V2 | |
SB_EC_C2PNB163V3 | C2PNB163V3 | |
SB_EC_C2PNB176W1 | C2PNB176W1 | |
SB_EC_C2TNB191V1 | C2TNB191V1 | |
SB_EC_C2TNB191V2 | C2TNB191V2 | |
SB_EC_C2TNB191V3 | C2TNB191V3 | |
SB_EC_C2ONB191V4 | C2ONB191V4 | |
SB_EC_C2ONB191V5 | C2ONB191V5 | |
SB_EC_C2PNB208W1 | C2PNB208W1 | |
SB_EC_C2TNB239V1 | C2TNB239V1 | |
SB_EC_C2TNB239V2 | C2TNB239V2 | |
SB_EC_C2TNB239V3 | C2TNB239V3 | |
SB_EC_C2ONB239V4 | C2ONB239V4 | |
SB_EC_C2ONB239V5 | C2ONB239V5 | |
SB_EC_C2PNB272W1 | C2PNB272W1 | |
SB_EC_C2PNB304W1 | C2PNB304W1 | |
SB_EC_C2TNB359V1 | C2TNB359V1 | |
SB_EC_C2PNB368W1 | C2PNB368W1 | |
SB_EC_C2TNB431R1 | C2TNB431R1 | |
SB_EC_NISTP192 | NISTP192 | |
SB_EC_NISTP224 | NISTP224 | |
SB_EC_NISTP256 | NISTP256 | |
SB_EC_NISTP384 | NISTP384 | |
SB_EC_NISTP521 | NISTP521 | |
SB_EC_NISTB163 | NISTB163 | |
SB_EC_NISTB233 | NISTB233 | |
SB_EC_NISTB283 | NISTB283 | |
SB_EC_NISTB409 | NISTB409 | |
SB_EC_NISTB571 | NISTB571 | |
SB_EC_NISTK163 | NISTK163 | |
SB_EC_NISTK233 | NISTK233 | |
SB_EC_NISTK283 | NISTK283 | |
SB_EC_NISTK409 | NISTK409 | |
SB_EC_NISTK571 | NISTK571 | |
SB_EC_GOSTCPTEST | GOSTCPTEST | |
SB_EC_GOSTCPA | GOSTCPA | |
SB_EC_GOSTCPB | GOSTCPB | |
SB_EC_GOSTCPC | GOSTCPC | |
SB_EC_GOSTCPXCHA | GOSTCPXCHA | |
SB_EC_GOSTCPXCHB | GOSTCPXCHB | |
SB_EC_BRAINPOOLP160R1 | BRAINPOOLP160R1 | |
SB_EC_BRAINPOOLP160T1 | BRAINPOOLP160T1 | |
SB_EC_BRAINPOOLP192R1 | BRAINPOOLP192R1 | |
SB_EC_BRAINPOOLP192T1 | BRAINPOOLP192T1 | |
SB_EC_BRAINPOOLP224R1 | BRAINPOOLP224R1 | |
SB_EC_BRAINPOOLP224T1 | BRAINPOOLP224T1 | |
SB_EC_BRAINPOOLP256R1 | BRAINPOOLP256R1 | |
SB_EC_BRAINPOOLP256T1 | BRAINPOOLP256T1 | |
SB_EC_BRAINPOOLP320R1 | BRAINPOOLP320R1 | |
SB_EC_BRAINPOOLP320T1 | BRAINPOOLP320T1 | |
SB_EC_BRAINPOOLP384R1 | BRAINPOOLP384R1 | |
SB_EC_BRAINPOOLP384T1 | BRAINPOOLP384T1 | |
SB_EC_BRAINPOOLP512R1 | BRAINPOOLP512R1 | |
SB_EC_BRAINPOOLP512T1 | BRAINPOOLP512T1 | |
SB_EC_CURVE25519 | CURVE25519 | |
SB_EC_CURVE448 | CURVE448 |
Fingerprint
string (read-only)
Default: ""
Contains the fingerprint (a hash imprint) of this certificate.
While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.
FriendlyName
string (read-only)
Default: ""
Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.
HashAlgorithm
string
Default: ""
Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use SigAlgorithm to find out the hash algorithm that is part of the certificate signature.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
Issuer
string (read-only)
Default: ""
The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via IssuerRDN.
IssuerRDN
string
Default: ""
A list of Property=Value pairs that uniquely identify the certificate issuer.
Example: /C=US/O=Nationwide CA/CN=Web Certification Authority
KeyAlgorithm
string
Default: "0"
Specifies the public key algorithm of this certificate.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
Use the KeyBits, Curve, and PublicKeyBytes fields to get more details about the key the certificate contains.
KeyBits
int (read-only)
Default: 0
Returns the length of the public key in bits.
This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the PublicKeyBytes or PrivateKeyBytes field would typically contain auxiliary values, and therefore be longer.
KeyFingerprint
string (read-only)
Default: ""
Returns a SHA1 fingerprint of the public key contained in the certificate.
Note that the key fingerprint is different from the certificate fingerprint accessible via the Fingerprint field. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.
KeyUsage
int
Default: 0
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
This value is a bit mask of the following values:
ckuUnknown | 0x00000 | Unknown key usage |
ckuDigitalSignature | 0x00001 | Digital signature |
ckuNonRepudiation | 0x00002 | Non-repudiation |
ckuKeyEncipherment | 0x00004 | Key encipherment |
ckuDataEncipherment | 0x00008 | Data encipherment |
ckuKeyAgreement | 0x00010 | Key agreement |
ckuKeyCertSign | 0x00020 | Certificate signing |
ckuCRLSign | 0x00040 | Revocation signing |
ckuEncipherOnly | 0x00080 | Encipher only |
ckuDecipherOnly | 0x00100 | Decipher only |
ckuServerAuthentication | 0x00200 | Server authentication |
ckuClientAuthentication | 0x00400 | Client authentication |
ckuCodeSigning | 0x00800 | Code signing |
ckuEmailProtection | 0x01000 | Email protection |
ckuTimeStamping | 0x02000 | Timestamping |
ckuOCSPSigning | 0x04000 | OCSP signing |
ckuSmartCardLogon | 0x08000 | Smartcard logon |
ckuKeyPurposeClientAuth | 0x10000 | Kerberos - client authentication |
ckuKeyPurposeKDC | 0x20000 | Kerberos - KDC |
Set this field before generating the certificate to propagate the key usage flags to the new certificate.
KeyValid
bool (read-only)
Default: False
Returns True if the certificate's key is cryptographically valid, and False otherwise.
OCSPLocations
string
Default: ""
Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.
Set this field before calling the certificate manager's Generate method to propagate it to the new certificate.
The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.
OCSPNoCheck
bool
Default: False
Accessor to the value of the certificate's ocsp-no-check extension.
Origin
int (read-only)
Default: 0
Returns the location that the certificate was taken or loaded from.
PolicyIDs
string
Default: ""
Contains identifiers (OIDs) of the applicable certificate policies.
The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.
Set this field when generating a certificate to propagate the policies information to the new certificate.
The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.
PrivateKeyBytes
byte[] (read-only)
Default: ""
Returns the certificate's private key in DER-encoded format. It is normal for this field to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.
PrivateKeyExists
bool (read-only)
Default: False
Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.
This field is independent from PrivateKeyBytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.
PrivateKeyExtractable
bool (read-only)
Default: False
Indicates whether the private key is extractable (exportable).
PublicKeyBytes
byte[] (read-only)
Default: ""
Contains the certificate's public key in DER format.
This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.
Qualified
bool (read-only)
Default: False
Indicates whether the certificate is qualified.
This property is set to True if the certificate is confirmed by a Trusted List to be qualified.
QualifiedStatements
QualifiedStatementsTypes
Default: 0
Returns a simplified qualified status of the certificate.
Qualifiers
string (read-only)
Default: ""
A list of qualifiers.
Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.
SelfSigned
bool (read-only)
Default: False
Indicates whether the certificate is self-signed (root) or signed by an external CA.
SerialNumber
byte[]
Default: ""
Returns the certificate's serial number.
The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.
SigAlgorithm
string (read-only)
Default: ""
Indicates the algorithm that was used by the CA to sign this certificate.
A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.
Source
PKISources (read-only)
Default: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
Subject
string (read-only)
Default: ""
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via SubjectRDN.
SubjectAlternativeName
string
Default: ""
Returns or sets the value of the Subject Alternative Name extension of the certificate.
Subject alternative names are used to provide additional names that are impractical to store in the main SubjectRDN field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.
The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.
SubjectKeyID
byte[]
Default: ""
Contains a unique identifier of the certificate's cryptographic key.
Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.
The SubjectKeyID and CAKeyID fields of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.
SubjectRDN
string
Default: ""
A list of Property=Value pairs that uniquely identify the certificate holder (subject).
Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.
Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.
Valid
bool (read-only)
Default: False
Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.
ValidFrom
string
Default: ""
The time point at which the certificate becomes valid, in UTC.
ValidTo
string
Default: ""
The time point at which the certificate expires, in UTC.
Constructors
public Certificate(byte[] bytes, int startIndex, int count, string password);
Public Certificate(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer, ByVal Password As String)
Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.
Loads the X.509 certificate from a memory buffer.
CertBytes is a buffer containing the raw certificate data. CertStartIndex and CertCount specify the starting position and number of bytes to be read from the buffer, respectively.
KeyBytes is a buffer containing the private key data. KeyStartIndex and KeyCount specify the starting position and number of bytes to be read from the buffer, respectively.
Password is a password encrypting the certificate.
public Certificate(byte[] bytes, int startIndex, int count);
Public Certificate(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer)
Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively.
public Certificate(string path, string password);
Public Certificate(ByVal Path As String, ByVal Password As String)
Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data. Password is a password encrypting the certificate.
public Certificate(string certPath, string keyPath, string password);
Public Certificate(ByVal CertPath As String, ByVal KeyPath As String, ByVal Password As String)
Loads the X.509 certificate from a file. CertPath specifies the full path to the file containing the certificate data. KeyPath specifies the full path to the file containing the private key. Password is a password encrypting the certificate.
public Certificate(string path);
Public Certificate(ByVal Path As String)
Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data.
public Certificate(System.IO.Stream stream);
Public Certificate(ByVal Stream As System.IO.Stream)
Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.
public Certificate(System.IO.Stream stream, string password);
Public Certificate(ByVal Stream As System.IO.Stream, ByVal Password As String)
Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data. Password is a password encrypting the certificate.
public Certificate(System.IO.Stream certStream, System.IO.Stream keyStream, string password);
Public Certificate(ByVal CertStream As System.IO.Stream, ByVal KeyStream As System.IO.Stream, ByVal Password As String)
Loads the X.509 certificate from a stream. CertStream is a stream containing the certificate data. KeyStream is a stream containing the private key. Password is a password encrypting the certificate.
public Certificate();
Public Certificate()
Creates a new object with default field values.
CRL Type
Represents a Certificate Revocation List.
Remarks
CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.
Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.
Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.
Fields
Bytes
byte[] (read-only)
Default: ""
Returns the raw CRL data in DER format.
CAKeyID
byte[]
Default: ""
A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
EntryCount
int (read-only)
Default: 0
Returns the number of certificate status entries in the CRL.
Issuer
string (read-only)
Default: ""
The common name of the CRL issuer (CA), typically a company name.
IssuerRDN
string (read-only)
Default: ""
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
Location
string (read-only)
Default: ""
The URL that the CRL was downloaded from.
NextUpdate
string
Default: ""
The planned time and date of the next version of this CRL to be published.
SigAlgorithm
string
Default: "0"
The public key algorithm that was used by the CA to sign this CRL.
Source
PKISources (read-only)
Default: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
TBS
byte[] (read-only)
Default: ""
The to-be-signed part of the CRL (the CRL without the signature part).
ThisUpdate
string
Default: ""
The date and time at which this version of the CRL was published.
Constructors
Creates a CRL object from a memory buffer. Bytes is a buffer containing raw (DER) CRL data, StartIndex and Count specify the starting position and the length of the CRL data in the buffer, respectively.
Creates a CRL object by downloading it from a remote location.
public CRL(System.IO.Stream stream);
Public CRL(ByVal Stream As System.IO.Stream)
Creates a CRL object from data contained in a stream.
Creates an empty CRL object.
OCSPResponse Type
Represents a single OCSP response originating from an OCSP responder.
Remarks
OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).
An OCSP response is a snapshot of the certificate status at a given time.
Fields
Bytes
byte[] (read-only)
Default: ""
A buffer containing the raw OCSP response data.
EntryCount
int (read-only)
Default: 0
The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
Issuer
string (read-only)
Default: ""
Indicates the issuer of this response (a CA or its authorized representative).
IssuerRDN
string (read-only)
Default: ""
Indicates the RDN of the issuer of this response (a CA or its authorized representative).
Location
string (read-only)
Default: ""
The location of the OCSP responder.
ProducedAt
string
Default: ""
Specifies the time when the response was produced, in UTC.
SigAlgorithm
string
Default: "0"
The public key algorithm that was used by the CA to sign this OCSP response.
Source
PKISources (read-only)
Default: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
Constructors
public OCSPResponse(byte[] bytes, int startIndex, int count);
Public OCSPResponse(ByVal Bytes As Byte(), ByVal StartIndex As Integer, ByVal Count As Integer)
Initializes the response from a memory buffer. Bytes is a buffer containing raw OCSP response data, StartIndex and Count specify the starting position and the number of bytes to be read from this buffer.
public OCSPResponse(string location);
Public OCSPResponse(ByVal Location As String)
Downloads an OCSP response from a remote location.
public OCSPResponse(System.IO.Stream stream);
Public OCSPResponse(ByVal Stream As System.IO.Stream)
Initializes the response with the data from a stream.
public OCSPResponse();
Public OCSPResponse()
Creates an empty OCSP response object.
ProxySettings Type
A container for proxy server settings.
Remarks
This type exposes a collection of properties for tuning up the proxy server configuration.
Fields
Address
string
Default: ""
The IP address of the proxy server.
Authentication
ProxyAuthTypes
Default: 0
The authentication type used by the proxy server.
patNoAuthentication | 0 |
patBasic | 1 |
patDigest | 2 |
patNTLM | 3 |
Password
string
Default: ""
The password to authenticate to the proxy server.
Port
int
Default: 0
The port on the proxy server to connect to.
ProxyType
ProxyTypes
Default: 0
The type of the proxy server.
cptNone | 0 |
cptSocks4 | 1 |
cptSocks5 | 2 |
cptWebTunnel | 3 |
cptHTTP | 4 |
RequestHeaders
string
Default: ""
Contains HTTP request headers for WebTunnel and HTTP proxy.
ResponseBody
string
Default: ""
Contains the HTTP or HTTPS (WebTunnel) proxy response body.
ResponseHeaders
string
Default: ""
Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
UseIPv6
bool
Default: False
Specifies whether IPv6 should be used when connecting through the proxy.
Username
string
Default: ""
Specifies the username credential for proxy authentication.
Constructors
public ProxySettings();
Public ProxySettings()
Creates a new ProxySettings object.
SocketSettings Type
A container for the socket settings.
Remarks
This type is a container for socket-layer parameters.
Fields
DNSMode
DNSResolveModes
Default: 0
Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
dmAuto | 0 |
dmPlatform | 1 |
dmOwn | 2 |
dmOwnSecure | 3 |
DNSPort
int
Default: 0
Specifies the port number to be used for sending queries to the DNS server.
DNSQueryTimeout
int
Default: 0
The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.
DNSServers
string
Default: ""
The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
DNSTotalTimeout
int
Default: 0
The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.
IncomingSpeedLimit
int
Default: 0
The maximum number of bytes to read from the socket, per second.
LocalAddress
string
Default: ""
The local network interface to bind the socket to.
LocalPort
int
Default: 0
The local port number to bind the socket to.
OutgoingSpeedLimit
int
Default: 0
The maximum number of bytes to write to the socket, per second.
Timeout
int
Default: 60000
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).
UseIPv6
bool
Default: False
Enables or disables IP protocol version 6.
Constructors
public SocketSettings();
Public SocketSettings()
Creates a new SocketSettings object.
TimestampInfo Type
A container for timestamp information.
Remarks
The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.
Fields
Accuracy
long (read-only)
Default: 0
This field indicates the accuracy of the included time mark, in microseconds.
Bytes
byte[] (read-only)
Default: ""
Returns the raw timestamp data in DER format.
CertificateIndex
int (read-only)
Default: -1
Returns the index of the TSA certificate in the Certificates collection.
Use this property to look up the TSA certificate in the Certificates collection.
ChainValidationDetails
int (read-only)
Default: 0
The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationResult
ChainValidities (read-only)
Default: 0
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
ContainsLongTermInfo
bool (read-only)
Default: False
Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
EntityLabel
string (read-only)
Default: ""
Use this property to get the timestamp entity label.
This property returns a string label that uniquely identifies the timestamp. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.
HashAlgorithm
string (read-only)
Default: ""
Returns the timestamp's hash algorithm.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
ParentEntity
string (read-only)
Default: ""
Use this property to get the label of the timestamp's parent entity.
This property references the EntityLabel of the object that the timestamp covers, typically a signature.
SerialNumber
byte[] (read-only)
Default: ""
Returns the timestamp's serial number.
Time
string (read-only)
Default: ""
The time point incorporated into the timestamp.
TimestampType
int (read-only)
Default: 0
Returns the type of the timestamp.
Available options:
tstUnknown | 0 | |
tstLegacy | 1 | Supported by: Authenticode components |
tstTrusted | 2 | Supported by: Authenticode components |
tstGeneric | 3 | Supported by: CAdES components |
tstESC | 4 | Supported by: CAdES components |
tstContent | 5 | Supported by: CAdES components |
tstCertsAndCRLs | 6 | Supported by: CAdES components |
tstArchive | 7 | Archive timestamp. Supported by: ASiC, CAdES, JAdES, Office, SOAP, XAdES components |
tstArchive2 | 8 | Archive v2 timestamp. Supported by: ASiC, CAdES components |
tstArchive3 | 9 | Archive v3 timestamp. Supported by: ASiC, CAdES components |
tstIndividualDataObjects | 10 | Individual data objects timetamp. Supported by: ASiC, Office, SOAP, XAdES components |
tstAllDataObjects | 11 | All data objects timestamp. Supported by: ASiC, Office, SOAP, XAdES components |
tstSignature | 12 | Signature timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstRefsOnly | 13 | RefsOnly timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstSigAndRefs | 14 | SigAndRefs timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstSignedData | 15 | SignedData timestamp. Supported by: JAdES components |
tstArchive141 | 16 | Archive timestamp v1.4.1. Supported by: ASiC, Office, SOAP, XAdES components |
Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).
TSAName
string (read-only)
Default: ""
This value uniquely identifies the Timestamp Authority (TSA).
This property provides information about the entity that manages the TSA.
ValidationLog
string (read-only)
Default: ""
Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.
ValidationResult
SignatureValidities (read-only)
Default: 0
Contains the timestamp validation outcome.
Use this property to check the result of the most recent timestamp validation.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
Constructors
public TimestampInfo();
Public TimestampInfo()
Creates a new TimestampInfo object with default field values.
TLSSettings Type
A container for TLS connection settings.
Remarks
The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.
Fields
AutoValidateCertificates
bool
Default: True
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
BaseConfiguration
SecureTransportPredefinedConfigurations
Default: 0
Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.
stpcDefault | 0 | |
stpcCompatible | 1 | |
stpcComprehensiveInsecure | 2 | |
stpcHighlySecure | 3 |
Ciphersuites
string
Default: ""
A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.
Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:
- NULL_NULL_NULL
- RSA_NULL_MD5
- RSA_NULL_SHA
- RSA_RC4_MD5
- RSA_RC4_SHA
- RSA_RC2_MD5
- RSA_IDEA_MD5
- RSA_IDEA_SHA
- RSA_DES_MD5
- RSA_DES_SHA
- RSA_3DES_MD5
- RSA_3DES_SHA
- RSA_AES128_SHA
- RSA_AES256_SHA
- DH_DSS_DES_SHA
- DH_DSS_3DES_SHA
- DH_DSS_AES128_SHA
- DH_DSS_AES256_SHA
- DH_RSA_DES_SHA
- DH_RSA_3DES_SHA
- DH_RSA_AES128_SHA
- DH_RSA_AES256_SHA
- DHE_DSS_DES_SHA
- DHE_DSS_3DES_SHA
- DHE_DSS_AES128_SHA
- DHE_DSS_AES256_SHA
- DHE_RSA_DES_SHA
- DHE_RSA_3DES_SHA
- DHE_RSA_AES128_SHA
- DHE_RSA_AES256_SHA
- DH_ANON_RC4_MD5
- DH_ANON_DES_SHA
- DH_ANON_3DES_SHA
- DH_ANON_AES128_SHA
- DH_ANON_AES256_SHA
- RSA_RC2_MD5_EXPORT
- RSA_RC4_MD5_EXPORT
- RSA_DES_SHA_EXPORT
- DH_DSS_DES_SHA_EXPORT
- DH_RSA_DES_SHA_EXPORT
- DHE_DSS_DES_SHA_EXPORT
- DHE_RSA_DES_SHA_EXPORT
- DH_ANON_RC4_MD5_EXPORT
- DH_ANON_DES_SHA_EXPORT
- RSA_CAMELLIA128_SHA
- DH_DSS_CAMELLIA128_SHA
- DH_RSA_CAMELLIA128_SHA
- DHE_DSS_CAMELLIA128_SHA
- DHE_RSA_CAMELLIA128_SHA
- DH_ANON_CAMELLIA128_SHA
- RSA_CAMELLIA256_SHA
- DH_DSS_CAMELLIA256_SHA
- DH_RSA_CAMELLIA256_SHA
- DHE_DSS_CAMELLIA256_SHA
- DHE_RSA_CAMELLIA256_SHA
- DH_ANON_CAMELLIA256_SHA
- PSK_RC4_SHA
- PSK_3DES_SHA
- PSK_AES128_SHA
- PSK_AES256_SHA
- DHE_PSK_RC4_SHA
- DHE_PSK_3DES_SHA
- DHE_PSK_AES128_SHA
- DHE_PSK_AES256_SHA
- RSA_PSK_RC4_SHA
- RSA_PSK_3DES_SHA
- RSA_PSK_AES128_SHA
- RSA_PSK_AES256_SHA
- RSA_SEED_SHA
- DH_DSS_SEED_SHA
- DH_RSA_SEED_SHA
- DHE_DSS_SEED_SHA
- DHE_RSA_SEED_SHA
- DH_ANON_SEED_SHA
- SRP_SHA_3DES_SHA
- SRP_SHA_RSA_3DES_SHA
- SRP_SHA_DSS_3DES_SHA
- SRP_SHA_AES128_SHA
- SRP_SHA_RSA_AES128_SHA
- SRP_SHA_DSS_AES128_SHA
- SRP_SHA_AES256_SHA
- SRP_SHA_RSA_AES256_SHA
- SRP_SHA_DSS_AES256_SHA
- ECDH_ECDSA_NULL_SHA
- ECDH_ECDSA_RC4_SHA
- ECDH_ECDSA_3DES_SHA
- ECDH_ECDSA_AES128_SHA
- ECDH_ECDSA_AES256_SHA
- ECDHE_ECDSA_NULL_SHA
- ECDHE_ECDSA_RC4_SHA
- ECDHE_ECDSA_3DES_SHA
- ECDHE_ECDSA_AES128_SHA
- ECDHE_ECDSA_AES256_SHA
- ECDH_RSA_NULL_SHA
- ECDH_RSA_RC4_SHA
- ECDH_RSA_3DES_SHA
- ECDH_RSA_AES128_SHA
- ECDH_RSA_AES256_SHA
- ECDHE_RSA_NULL_SHA
- ECDHE_RSA_RC4_SHA
- ECDHE_RSA_3DES_SHA
- ECDHE_RSA_AES128_SHA
- ECDHE_RSA_AES256_SHA
- ECDH_ANON_NULL_SHA
- ECDH_ANON_RC4_SHA
- ECDH_ANON_3DES_SHA
- ECDH_ANON_AES128_SHA
- ECDH_ANON_AES256_SHA
- RSA_NULL_SHA256
- RSA_AES128_SHA256
- RSA_AES256_SHA256
- DH_DSS_AES128_SHA256
- DH_RSA_AES128_SHA256
- DHE_DSS_AES128_SHA256
- DHE_RSA_AES128_SHA256
- DH_DSS_AES256_SHA256
- DH_RSA_AES256_SHA256
- DHE_DSS_AES256_SHA256
- DHE_RSA_AES256_SHA256
- DH_ANON_AES128_SHA256
- DH_ANON_AES256_SHA256
- RSA_AES128_GCM_SHA256
- RSA_AES256_GCM_SHA384
- DHE_RSA_AES128_GCM_SHA256
- DHE_RSA_AES256_GCM_SHA384
- DH_RSA_AES128_GCM_SHA256
- DH_RSA_AES256_GCM_SHA384
- DHE_DSS_AES128_GCM_SHA256
- DHE_DSS_AES256_GCM_SHA384
- DH_DSS_AES128_GCM_SHA256
- DH_DSS_AES256_GCM_SHA384
- DH_ANON_AES128_GCM_SHA256
- DH_ANON_AES256_GCM_SHA384
- ECDHE_ECDSA_AES128_SHA256
- ECDHE_ECDSA_AES256_SHA384
- ECDH_ECDSA_AES128_SHA256
- ECDH_ECDSA_AES256_SHA384
- ECDHE_RSA_AES128_SHA256
- ECDHE_RSA_AES256_SHA384
- ECDH_RSA_AES128_SHA256
- ECDH_RSA_AES256_SHA384
- ECDHE_ECDSA_AES128_GCM_SHA256
- ECDHE_ECDSA_AES256_GCM_SHA384
- ECDH_ECDSA_AES128_GCM_SHA256
- ECDH_ECDSA_AES256_GCM_SHA384
- ECDHE_RSA_AES128_GCM_SHA256
- ECDHE_RSA_AES256_GCM_SHA384
- ECDH_RSA_AES128_GCM_SHA256
- ECDH_RSA_AES256_GCM_SHA384
- PSK_AES128_GCM_SHA256
- PSK_AES256_GCM_SHA384
- DHE_PSK_AES128_GCM_SHA256
- DHE_PSK_AES256_GCM_SHA384
- RSA_PSK_AES128_GCM_SHA256
- RSA_PSK_AES256_GCM_SHA384
- PSK_AES128_SHA256
- PSK_AES256_SHA384
- PSK_NULL_SHA256
- PSK_NULL_SHA384
- DHE_PSK_AES128_SHA256
- DHE_PSK_AES256_SHA384
- DHE_PSK_NULL_SHA256
- DHE_PSK_NULL_SHA384
- RSA_PSK_AES128_SHA256
- RSA_PSK_AES256_SHA384
- RSA_PSK_NULL_SHA256
- RSA_PSK_NULL_SHA384
- RSA_CAMELLIA128_SHA256
- DH_DSS_CAMELLIA128_SHA256
- DH_RSA_CAMELLIA128_SHA256
- DHE_DSS_CAMELLIA128_SHA256
- DHE_RSA_CAMELLIA128_SHA256
- DH_ANON_CAMELLIA128_SHA256
- RSA_CAMELLIA256_SHA256
- DH_DSS_CAMELLIA256_SHA256
- DH_RSA_CAMELLIA256_SHA256
- DHE_DSS_CAMELLIA256_SHA256
- DHE_RSA_CAMELLIA256_SHA256
- DH_ANON_CAMELLIA256_SHA256
- ECDHE_ECDSA_CAMELLIA128_SHA256
- ECDHE_ECDSA_CAMELLIA256_SHA384
- ECDH_ECDSA_CAMELLIA128_SHA256
- ECDH_ECDSA_CAMELLIA256_SHA384
- ECDHE_RSA_CAMELLIA128_SHA256
- ECDHE_RSA_CAMELLIA256_SHA384
- ECDH_RSA_CAMELLIA128_SHA256
- ECDH_RSA_CAMELLIA256_SHA384
- RSA_CAMELLIA128_GCM_SHA256
- RSA_CAMELLIA256_GCM_SHA384
- DHE_RSA_CAMELLIA128_GCM_SHA256
- DHE_RSA_CAMELLIA256_GCM_SHA384
- DH_RSA_CAMELLIA128_GCM_SHA256
- DH_RSA_CAMELLIA256_GCM_SHA384
- DHE_DSS_CAMELLIA128_GCM_SHA256
- DHE_DSS_CAMELLIA256_GCM_SHA384
- DH_DSS_CAMELLIA128_GCM_SHA256
- DH_DSS_CAMELLIA256_GCM_SHA384
- DH_anon_CAMELLIA128_GCM_SHA256
- DH_anon_CAMELLIA256_GCM_SHA384
- ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
- ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
- ECDH_ECDSA_CAMELLIA128_GCM_SHA256
- ECDH_ECDSA_CAMELLIA256_GCM_SHA384
- ECDHE_RSA_CAMELLIA128_GCM_SHA256
- ECDHE_RSA_CAMELLIA256_GCM_SHA384
- ECDH_RSA_CAMELLIA128_GCM_SHA256
- ECDH_RSA_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_GCM_SHA256
- PSK_CAMELLIA256_GCM_SHA384
- DHE_PSK_CAMELLIA128_GCM_SHA256
- DHE_PSK_CAMELLIA256_GCM_SHA384
- RSA_PSK_CAMELLIA128_GCM_SHA256
- RSA_PSK_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_SHA256
- PSK_CAMELLIA256_SHA384
- DHE_PSK_CAMELLIA128_SHA256
- DHE_PSK_CAMELLIA256_SHA384
- RSA_PSK_CAMELLIA128_SHA256
- RSA_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_CAMELLIA128_SHA256
- ECDHE_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_RC4_SHA
- ECDHE_PSK_3DES_SHA
- ECDHE_PSK_AES128_SHA
- ECDHE_PSK_AES256_SHA
- ECDHE_PSK_AES128_SHA256
- ECDHE_PSK_AES256_SHA384
- ECDHE_PSK_NULL_SHA
- ECDHE_PSK_NULL_SHA256
- ECDHE_PSK_NULL_SHA384
- ECDHE_RSA_CHACHA20_POLY1305_SHA256
- ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
- DHE_RSA_CHACHA20_POLY1305_SHA256
- PSK_CHACHA20_POLY1305_SHA256
- ECDHE_PSK_CHACHA20_POLY1305_SHA256
- DHE_PSK_CHACHA20_POLY1305_SHA256
- RSA_PSK_CHACHA20_POLY1305_SHA256
- AES128_GCM_SHA256
- AES256_GCM_SHA384
- CHACHA20_POLY1305_SHA256
- AES128_CCM_SHA256
- AES128_CCM8_SHA256
ClientAuth
ClientAuthTypes
Default: 0
Enables or disables certificate-based client authentication.
Set this property to true to tune up the client authentication type:
ccatNoAuth | 0 | |
ccatRequestCert | 1 | |
ccatRequireCert | 2 |
ECCurves
string
Default: ""
Defines the elliptic curves to enable.
Extensions
string
Default: ""
Provides access to TLS extensions.
ForceResumeIfDestinationChanges
bool
Default: False
Whether to force TLS session resumption when the destination address changes.
PreSharedIdentity
string
Default: ""
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
PreSharedKey
string
Default: ""
Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
PreSharedKeyCiphersuite
string
Default: ""
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
RenegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default: 2
Selects the renegotiation attack prevention mechanism.
The following options are available:
crapmCompatible | 0 | TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled). |
crapmStrict | 1 | Renegotiation attack prevention is enabled and enforced. |
crapmAuto | 2 | Automatically choose whether to enable or disable renegotiation attack prevention. |
RevocationCheck
RevocationCheckKinds
Default: 1
Specifies the kind(s) of revocation check to perform.
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
crcNone | 0 | No revocation checking. |
crcAuto | 1 | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL | 2 | All provided CRL endpoints will be checked, and all checks must succeed. |
crcAllOCSP | 3 | All provided OCSP endpoints will be checked, and all checks must succeed. |
crcAllCRLAndOCSP | 4 | All provided CRL and OCSP endpoints will be checked, and all checks must succeed. |
crcAnyCRL | 5 | All provided CRL endpoints will be checked, and at least one check must succeed. |
crcAnyOCSP | 6 | All provided OCSP endpoints will be checked, and at least one check must succeed. |
crcAnyCRLOrOCSP | 7 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL | 8 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.
Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.
SSLOptions
int
Default: 16
Various SSL (TLS) protocol options, set of
cssloExpectShutdownMessage | 0x001 | Wait for the close-notify message when shutting down the connection |
cssloOpenSSLDTLSWorkaround | 0x002 | (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions |
cssloDisableKexLengthAlignment | 0x004 | Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it. |
cssloForceUseOfClientCertHashAlg | 0x008 | Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it. |
cssloAutoAddServerNameExtension | 0x010 | Automatically add the server name extension when known |
cssloAcceptTrustedSRPPrimesOnly | 0x020 | Accept trusted SRP primes only |
cssloDisableSignatureAlgorithmsExtension | 0x040 | Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it. |
cssloIntolerateHigherProtocolVersions | 0x080 | (server option) Do not allow fallback from TLS versions higher than currently enabled |
cssloStickToPrefCertHashAlg | 0x100 | Stick to preferred certificate hash algorithms |
cssloNoImplicitTLS12Fallback | 0x200 | Disable implicit TLS 1.3 to 1.2 fallbacks |
cssloUseHandshakeBatches | 0x400 | Send the handshake message as large batches rather than individually |
TLSMode
SSLModes
Default: 0
Specifies the TLS mode to use.
smDefault | 0 | |
smNoTLS | 1 | Do not use TLS |
smExplicitTLS | 2 | Connect to the server without any encryption and then request an SSL session. |
smImplicitTLS | 3 | Connect to the specified port, and establish the SSL session at once. |
smMixedTLS | 4 | Connect to the specified port, and establish the SSL session at once, but allow plain data. |
UseExtendedMasterSecret
bool
Default: False
Enables the Extended Master Secret Extension, as defined in RFC 7627.
UseSessionResumption
bool
Default: False
Enables or disables the TLS session resumption capability.
Versions
int
Default: 16
The SSL/TLS versions to enable by default.
csbSSL2 | 0x01 | SSL 2 |
csbSSL3 | 0x02 | SSL 3 |
csbTLS1 | 0x04 | TLS 1.0 |
csbTLS11 | 0x08 | TLS 1.1 |
csbTLS12 | 0x10 | TLS 1.2 |
csbTLS13 | 0x20 | TLS 1.3 |
Constructors
public TLSSettings();
Public TLSSettings()
Creates a new TLSSettings object.