SOAPSigner Class
Properties Methods Events Config Settings Errors
The SOAPSigner class signs SOAP messages.
Syntax
secureblackbox.SOAPSigner
Remarks
SOAPSigner creates electronic signatures for SOAP messages, and includes advanced security features such as support for timestamps and advanced electronic signatures (XAdES).
Property List
The following is the full list of the properties of the class with short descriptions. Click on the links for further details.
AutoValidateSignatures | Specifies whether class should validate any present signatures when the document is opened. |
BlockedCertificates | The certificates that must be rejected as trust anchors. |
Certificates | A collection of certificates included in the electronic signature. |
CheckTrustedLists | Specifies whether the class should attempt to validate chain trust via a known Trusted List. |
CRLs | A collection of certificate revocation lists embedded into the signature by the signer. |
EmbedCertificateMethod | Controls the certificate disposition within the signature. |
Encoding | Specifies XML encoding. |
ExternalCrypto | Provides access to external signing and DC parameters. |
FIPSMode | Reserved. |
IgnoreChainValidationErrors | Makes the class tolerant to chain validation errors. |
InputBytes | Use this property to pass the input to class in byte array form. |
InputFile | Specifies the SOAP message to be signed. |
InputStream | A stream containing the SOAP message to be signed. |
KnownCertificates | Additional certificates for chain validation. |
KnownCRLs | Additional CRLs for chain validation. |
KnownOCSPs | Additional OCSP responses for chain validation. |
NewSignature | Provides access to new signature properties. |
OCSPs | A collection of OCSP responses embedded into the signature. |
OfflineMode | Switches the class to offline mode. |
OutputBytes | Use this property to read the output the class object has produced. |
OutputFile | A file where the signed SOAP message will be saved. |
OutputStream | A stream to write the signed SOAP message to. |
Profile | Specifies a pre-defined profile to apply when creating the signature. |
Proxy | The proxy server settings. |
References | A list of references to the data to be signed. |
RevocationCheck | Specifies the kind(s) of revocation check to perform for all chain certificates. |
SecurityHeaderIndex | Specifies the SecurityHeader index. |
Signatures | Provides details of all signatures found in the SOAP message. |
SigningCertificate | The certificate to be used for signing. |
SigningChain | The signing certificate chain. |
SocketSettings | Manages network connection settings. |
Timestamps | Contains a collection of timestamps for the processed document. |
TimestampServer | The address of the timestamping server. |
TLSClientChain | The TLS client certificate chain. |
TLSServerChain | The TLS server's certificate chain. |
TLSSettings | Manages TLS layer settings. |
TrustedCertificates | A list of trusted certificates for chain validation. |
ValidationMoment | The time point at which signature validity is to be established. |
Method List
The following is the full list of the methods of the class with short descriptions. Click on the links for further details.
AddBodyReference | Creates a new XML reference to the Body element of the SOAP message. |
AddDataReference | Creates a new XML reference to the specified data. |
AddKnownNamespace | Adds known prefix and correspondent namespace URI. |
AddReference | Creates a new XML reference to the specified XML element. |
Close | Closes an opened SOAP message. |
Config | Sets or retrieves a configuration setting. |
DoAction | Performs an additional action. |
ExtractAsyncData | Extracts user data from the DC signing service response. |
GetInnerXML | Get the inner XML content of the selected XML element. |
GetOuterXML | Get the outer XML content of the selected XML element. |
GetTextContent | Get the text content of the selected XML element. |
Open | Opens a document for signing or updating. |
Reset | Resets the class settings. |
Revalidate | Revalidates a signature in accordance with current settings. |
SelectInfo | Select signature information for a specific entity. |
SetInnerXML | Set the inner XML content of the selected XML element. |
SetTextContent | Set the text content of the selected XML element. |
Sign | Signs the SOAP message. |
SignAsyncBegin | Initiates the asynchronous signing operation. |
SignAsyncEnd | Completes the asynchronous signing operation. |
SignExternal | Signs the document using an external signing facility. |
Timestamp | Use this method to add an timestamp. |
Upgrade | Upgrades existing XAdES signature to a new form. |
Event List
The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.
ChainElementDownload | Fires when there is a need to download a chain element from an online source. |
ChainElementNeeded | Fires when an element required to validate the chain was not located. |
ChainElementStore | This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature. |
ChainValidated | Reports the completion of a certificate chain validation. |
ChainValidationProgress | This event is fired multiple times during chain validation to report various stages of the validation procedure. |
Error | Information about errors during signing. |
ExternalSign | Handles remote or external signing initiated by the SignExternal method or other source. |
FormatElement | Reports the XML element that is currently being processed. |
FormatText | Reports XML text that is currently being processed. |
MessageLoaded | This event is fired when the message has been loaded into memory. |
Notification | This event notifies the application about an underlying control flow event. |
ReferenceValidated | Marks the end of a reference validation. |
ResolveReference | Asks the application to resolve a reference. |
SignatureFound | Signifies the start of signature validation. |
SignatureValidated | Marks the completion of the signature validation routine. |
TimestampFound | Signifies the start of a timestamp validation routine. |
TimestampRequest | Fires when the class is ready to request a timestamp from an external TSA. |
TimestampValidated | Reports the completion of the timestamp validation routine. |
TLSCertNeeded | Fires when a remote TLS party requests a client certificate. |
TLSCertValidate | This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance. |
TLSEstablished | Fires when a TLS handshake with Host successfully completes. |
TLSHandshake | Fires when a new TLS handshake is initiated, before the handshake commences. |
TLSShutdown | Reports the graceful closure of a TLS connection. |
Config Settings
The following is a list of config settings for the class with short descriptions. Click on the links for further details.
AddAllDataObjectsTimestamp | Whether to add all data objects timestamp during signing. |
AsyncDocumentID | Specifies the document ID for SignAsyncEnd() call. |
BinarySecurityTokenID | Specifies the ID for BinarySecurityToken element. |
BinarySecurityTokenType | Specifies the token type for BinarySecurityToken element. |
ChainCurrentCACert | Returns the current CA certificate. |
ChainCurrentCert | Returns the certificate that is currently being validated. |
ChainCurrentCRL | Returns the current CRL. |
ChainCurrentCRLSize | Returns the size of the current CRL. |
ChainCurrentOCSP | Returns the current OCSP response. |
ChainCurrentOCSPSigner | Returns the signer of the current OCSP object. |
ChainInterimDetails | Returns the current interim validation details. |
ChainInterimResult | Returns the current interim validation result. |
CheckValidityPeriodForTrusted | Whether to check validity period for trusted certificates. |
ClaimedRolesXML | The XML content of the claimed roles. |
ClaimedRoleText | The text of the claimed role. |
CommitmentTypeIndicationAllSignedDataObjects[Index] | Specifies the CommitmentTypeIndication's AllSignedDataObjects. |
CommitmentTypeIndicationCount | The number of the CommitmentTypeIndication elements. |
CommitmentTypeIndicationIdentifier[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier. |
CommitmentTypeIndicationIdentifierDescription[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's Description. |
CommitmentTypeIndicationIdentifierDocumentationReferences[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences. |
CommitmentTypeIndicationIdentifierQualifier[Index] | Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier. |
CommitmentTypeIndicationObjectReference[Index] | Specifies the CommitmentTypeIndication's ObjectReference. |
CommitmentTypeIndicationQualifiersXML[Index] | The XML content of the CommitmentTypeIndication's Qualifiers. |
CustomTrustedLists | Specifies the custom TrustedLists. |
CustomTSLs | Specifies the custom TrustedLists. |
DataObjectFormatCount | The number of the DataObjectFormat elements. |
DataObjectFormatDescription[Index] | Specifies the DataObjectFormat's Description. |
DataObjectFormatEncoding[Index] | Specifies the DataObjectFormat's Encoding. |
DataObjectFormatMimeType[Index] | Specifies the DataObjectFormat's MimeType. |
DataObjectFormatObjectIdentifier[Index] | Specifies the DataObjectFormat's ObjectIdentifier's Identifier. |
DataObjectFormatObjectIdentifierDescription[Index] | Specifies the DataObjectFormat's ObjectIdentifier's Description. |
DataObjectFormatObjectIdentifierDocumentationReferences[Index] | Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences. |
DataObjectFormatObjectIdentifierQualifier[Index] | Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier. |
DataObjectFormatObjectReference[Index] | Specifies the DataObjectFormat's ObjectReference. |
DislikeOpenEndedOCSPs | Tells the class to discourage OCSP responses without an explicit NextUpdate parameter. |
ExclusiveCanonicalizationPrefix | Specifies the exclusive canonicalization prefix. |
ForceCompleteChainValidation | Whether to check the CA certificates when the signing certificate is invalid. |
ForceCompleteChainValidationForTrusted | Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors. |
GracePeriod | Specifies a grace period to apply during revocation information checks. |
HMACKey | The key value for HMAC. |
HMACOutputLength | Sets the length of the HMAC output. |
HMACSigningUsed | Whether to use HMAC signing. |
IgnoreChainLoops | Whether chain loops should be ignored. |
IgnoreChainValidationErrors | Whether to ignore any certificate chain validation issues. |
IgnoreOCSPNoCheckExtension | Whether the OCSP NoCheck extension should be ignored. |
IgnoreSystemTrust | Whether trusted Windows Certificate Stores should be treated as trusted. |
IgnoreTimestampFailure | Whether to ignore time-stamping failure during signing. |
ImplicitlyTrustSelfSignedCertificates | Whether to trust self-signed certificates. |
IncludeKey | Specifies whether to include the signing key to the signature. |
IncludeKeyValue | Specifies whether the key value must be included to the signature. |
IncludeKnownRevocationInfoToSignature | Whether to include custom revocation info to the signature. |
InclusiveNamespacesPrefixList | Specifies the InclusiveNamespaces PrefixList. |
KeyInfoCustomXML | The custom XML content for KeyInfo element. |
KeyInfoDetails | Specifies the signing key info details to include to the signature. |
KeyInfoID | Specifies the ID for KeyInfo element. |
KeyName | Contains information about the key used for signing. |
ManifestCount | TBD. |
ManifestID[i] | TBD. |
ManifestObjectIndex[i] | TBD. |
ManifestXML[i] | TBD. |
NormalizeNewLine | Controls whether newline combinations should be automatically normalized. |
ObjectCount | TBD. |
ObjectEncoding[i] | TBD. |
ObjectID[i] | TBD. |
ObjectMimeType[i] | TBD. |
ObjectSignaturePropertiesCount | TBD. |
ObjectSignaturePropertiesID[i] | TBD. |
ObjectSignaturePropertiesObjectIndex[i] | TBD. |
ObjectSignaturePropertiesXML[i] | TBD. |
ObjectSignaturePropertyCount | TBD. |
ObjectSignaturePropertyID[i] | TBD. |
ObjectSignaturePropertyPropertiesIndex[i] | TBD. |
ObjectSignaturePropertyTarget[i] | TBD. |
ObjectSignaturePropertyXML[i] | TBD. |
ObjectXML[i] | TBD. |
PolicyDescription | signature policy description. |
PolicyDescription | signature policy description. |
PolicyExplicitText | The explicit text of the user notice. |
PolicyExplicitText | The explicit text of the user notice. |
PolicyUNNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
PolicyUNNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
PolicyUNOrganization | The organization part of the NoticeReference qualifier. |
PolicyUNOrganization | The organization part of the NoticeReference qualifier. |
PrependCustomXML | The custom XML content that prepended before signature. |
ProductionPlace | Identifies the place of the signature production. |
ProductionPlace | Identifies the place of the signature production. |
PromoteLongOCSPResponses | Whether long OCSP responses are requested. |
PSSUsed | Whether to use RSASSA-PSS algorithm. |
PSSUsed | Whether to use RSASSA-PSS algorithm. |
QualifyingPropertiesID | Specifies the ID for QualifyingProperties element. |
QualifyingPropertiesObjectID | Specifies the ID for object with QualifyingProperties element. |
QualifyingPropertiesReferenceCount | The number of the QualifyingPropertiesReference elements. |
QualifyingPropertiesReferenceID[Index] | Specifies the QualifyingPropertiesReference's ID. |
QualifyingPropertiesReferenceURI[Index] | Specifies the QualifyingPropertiesReference's URI. |
RefsTimestampType | Specifies references timestamp type to include to the signature. |
SchemeParams | The algorithm scheme parameters to employ. |
SecurityHeaderIndex | Specifies the SecurityHeader index. |
SecurityHeaderMustUnderstand | Specifies the MustUnderstand for SecurityHeader element. |
SecurityTokenReferenceID | Specifies the ID for SecurityTokenReference element. |
SecurityTokenReferenceTokenType | Specifies the token type for SecurityTokenReference element. |
SignatureID | Specifies the ID for Signature element. |
SignaturePrefix | Specifies the signature prefix. |
SignatureValueID | Specifies the ID for SignatureValue element. |
SignedInfoID | Specifies the ID for SignedInfo element. |
SignedPropertiesID | Specifies the ID for SignedProperties element. |
SignedPropertiesReferenceCanonicalizationMethod | Specifies the canonicalization method used in SignedProperties reference. |
SignedPropertiesReferenceHashAlgorithm | Specifies the hash algorithm used in SignedProperties reference. |
SignedPropertiesReferenceID | Specifies the ID for Reference element that points to SignedProperties element. |
SignedPropertiesReferenceInclusiveNamespacesPrefixList | Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference. |
SignedPropertiesReferenceIndex | Specifies the index of SignedProperties reference. |
SignedSignaturePropertiesID | Specifies the ID for SignedSignatureProperties element. |
SigningCertificatesChain | The indicator of which certificates should be/are included as the signing chain. |
SigningCertificatesHashAlgorithm | Specifies the hash algorithm used for SigningCertificates. |
SigPolicyDescription | signature policy description. |
SigPolicyDescription | signature policy description. |
SigPolicyExplicitText | The explicit text of the user notice. |
SigPolicyExplicitText | The explicit text of the user notice. |
SigPolicyHash | The EPES policy hash. |
SigPolicyHash | The EPES policy hash. |
SigPolicyHashAlgorithm | The hash algorithm that was used to generate the EPES policy hash. |
SigPolicyHashAlgorithm | The hash algorithm that was used to generate the EPES policy hash. |
SigPolicyID | The EPES policy ID. |
SigPolicyID | The EPES policy ID. |
SigPolicyNoticeNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
SigPolicyNoticeNumbers | The noticeNumbers part of the NoticeReference CAdES attribute. |
SigPolicyNoticeOrganization | The organization part of the NoticeReference qualifier. |
SigPolicyNoticeOrganization | The organization part of the NoticeReference qualifier. |
SigPolicyURI | The EPES policy URI. |
SigPolicyURI | The EPES policy URI. |
StripWhitespace | Controls whether excessive whitespace characters should be stripped off when saving the document. |
TempPath | Path for storing temporary files. |
TimestampCanonicalizationMethod | Specifies canonicalization method used in timestamp. |
TimestampResponse | A base16-encoded timestamp response received from a TSA. |
TimestampValidationDataDetails | Specifies timestamp validation data details to include to the signature. |
TLSChainValidationDetails | Contains the advanced details of the TLS server certificate validation. |
TLSChainValidationResult | Contains the result of the TLS server certificate validation. |
TLSClientAuthRequested | Indicates whether the TLS server requests client authentication. |
TLSValidationLog | Contains the log of the TLS server certificate validation. |
TolerateMinorChainIssues | Whether to tolerate minor chain issues. |
TspAttemptCount | Specifies the number of timestamping request attempts. |
TspHashAlgorithm | Sets a specific hash algorithm for use with the timestamping service. |
TspReqPolicy | Sets a request policy ID to include in the timestamping request. |
UseDefaultTrustedLists | Enables or disables the use of the default TrustedLists. |
UseDefaultTSLs | Enables or disables the use of the default TrustedLists. |
UseHMACSigning | Whether to use HMAC signing. |
UseHMACSigning | Whether to use HMAC signing. |
UseMicrosoftCTL | Enables or disables the automatic use of the Microsoft online certificate trust list. |
UsePSS | Whether to use RSASSA-PSS algorithm. |
UsePSS | Whether to use RSASSA-PSS algorithm. |
UseSystemCertificates | Enables or disables the use of the system certificates. |
UseValidationCache | Enables or disable the use of the product-wide certificate chain validation cache. |
UseValidatorSettingsForTLSValidation | Whether to employ the primary chain validator setup for auxiliary TLS chain validations. |
ValidationDataRefsDetails | Specifies validation data references details to include to the signature. |
ValidationDataRefsHashAlgorithm | Specifies the hash algorithm used in validation data references. |
ValidationDataValuesDetails | Specifies validation data values details to include to the signature. |
WriteBOM | Specifies whether byte-order mark should be written when saving the document. |
WSSEPrefix | Specifies the WSSE prefix. |
WSUPrefix | Specifies the WSU prefix. |
WSUTimestampCreated | Specifies the message creation time. |
WSUTimestampCreatedFormat | Specifies the date time format for message creation time. |
WSUTimestampCreatedTimeZoneOffset | Specifies the time zone offset for message creation time. |
WSUTimestampExpires | Specifies the message expiration time. |
WSUTimestampExpiresFormat | Specifies the date time format for message expiration time. |
WSUTimestampExpiresTimeZoneOffset | Specifies the time zone offset for message expiration time. |
WSUTimestampID | Specifies the ID for wsu:Timestamp element. |
XAdESPrefix | Specifies the XAdES prefix. |
XAdESv141Prefix | Specifies the XAdES v1.4.1 prefix. |
XMLFormatting | Specifies the signature XML formatting. |
ASN1UseGlobalTagCache | Controls whether ASN.1 module should use a global object cache. |
AssignSystemSmartCardPins | Specifies whether CSP-level PINs should be assigned to CNG keys. |
CheckKeyIntegrityBeforeUse | Enables or disable private key integrity check before use. |
CookieCaching | Specifies whether a cookie cache should be used for HTTP(S) transports. |
Cookies | Gets or sets local cookies for the class. |
DefDeriveKeyIterations | Specifies the default key derivation algorithm iteration count. |
DNSLocalSuffix | The suffix to assign for TLD names. |
EnableClientSideSSLFFDHE | Enables or disables finite field DHE key exchange support in TLS clients. |
GlobalCookies | Gets or sets global cookies for all the HTTP transports. |
HardwareCryptoUsePolicy | The hardware crypto usage policy. |
HttpUserAgent | Specifies the user agent name to be used by all HTTP clients. |
HttpVersion | The HTTP version to use in any inner HTTP client classes created. |
IgnoreExpiredMSCTLSigningCert | Whether to tolerate the expired Windows Update signing certificate. |
ListDelimiter | The delimiter character for multi-element lists. |
LogDestination | Specifies the debug log destination. |
LogDetails | Specifies the debug log details to dump. |
LogFile | Specifies the debug log filename. |
LogFilters | Specifies the debug log filters. |
LogFlushMode | Specifies the log flush mode. |
LogLevel | Specifies the debug log level. |
LogMaxEventCount | Specifies the maximum number of events to cache before further action is taken. |
LogRotationMode | Specifies the log rotation mode. |
MaxASN1BufferLength | Specifies the maximal allowed length for ASN.1 primitive tag data. |
MaxASN1TreeDepth | Specifies the maximal depth for processed ASN.1 trees. |
OCSPHashAlgorithm | Specifies the hash algorithm to be used to identify certificates in OCSP requests. |
OldClientSideRSAFallback | Specifies whether the SSH client should use a SHA1 fallback. |
ProductVersion | Returns the version of the SecureBlackbox library. |
ServerSSLDHKeyLength | Sets the size of the TLS DHE key exchange group. |
StaticDNS | Specifies whether static DNS rules should be used. |
StaticIPAddress[domain] | Gets or sets an IP address for the specified domain name. |
StaticIPAddresses | Gets or sets all the static DNS rules. |
Tag | Allows to store any custom data. |
TLSSessionGroup | Specifies the group name of TLS sessions to be used for session resumption. |
TLSSessionLifetime | Specifies lifetime in seconds of the cached TLS session. |
TLSSessionPurgeInterval | Specifies how often the session cache should remove the expired TLS sessions. |
UseInternalRandom | Switches between SecureBlackbox-own and platform PRNGs. |
UseLegacyAdESValidation | Enables legacy AdES validation mode. |
UseOwnDNSResolver | Specifies whether the client classes should use own DNS resolver. |
UseSharedSystemStorages | Specifies whether the validation engine should use a global per-process copy of the system certificate stores. |
UseSystemNativeSizeCalculation | An internal CryptoAPI access tweak. |
UseSystemOAEPAndPSS | Enforces or disables the use of system-driven RSA OAEP and PSS computations. |
UseSystemRandom | Enables or disables the use of the OS PRNG. |
AutoValidateSignatures Property (SOAPSigner Class)
Specifies whether class should validate any present signatures when the document is opened.
Syntax
public boolean isAutoValidateSignatures(); public void setAutoValidateSignatures(boolean autoValidateSignatures);
Default Value
False
Remarks
This setting is switched off by default to speed up document processing. Even if the document is loaded with this property set to false, you can validate the signatures manually on a later stage using the Revalidate method.
BlockedCertificates Property (SOAPSigner Class)
The certificates that must be rejected as trust anchors.
Syntax
public CertificateList getBlockedCertificates(); public void setBlockedCertificates(CertificateList blockedCertificates);
Remarks
Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.Certificates Property (SOAPSigner Class)
A collection of certificates included in the electronic signature.
Syntax
public CertificateList getCertificates();
Remarks
This property includes a collection of certificates of the currently selected info.
This collection is indexed from 0 to size -1.
This property is read-only and not available at design time.
Please refer to the Certificate type for a complete list of fields.CheckTrustedLists Property (SOAPSigner Class)
Specifies whether the class should attempt to validate chain trust via a known Trusted List.
Syntax
public boolean isCheckTrustedLists(); public void setCheckTrustedLists(boolean checkTrustedLists);
Default Value
False
Remarks
Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).
CRLs Property (SOAPSigner Class)
A collection of certificate revocation lists embedded into the signature by the signer.
Syntax
public CRLList getCRLs();
Remarks
Use this property to access the CRLs embedded into the signature by the signer.
This property is read-only and not available at design time.
Please refer to the CRL type for a complete list of fields.EmbedCertificateMethod Property (SOAPSigner Class)
Controls the certificate disposition within the signature.
Syntax
public int getEmbedCertificateMethod(); public void setEmbedCertificateMethod(int embedCertificateMethod); Enumerated values: public final static int cwecInSignature = 0; public final static int cwecInBinarySecurityToken = 1; public final static int cwecInSignedBinarySecurityToken = 2; public final static int cwecInBinarySecurityTokenAndSignature = 3; public final static int cwecNone = 4;
Default Value
1
Remarks
This property controls the method of embedding the signing certificate(s) into the signature if WS-Security signature type is used.
Supported values:
cwecInSignature | 0 | Embed certificate(s) into the signature |
cwecInBinarySecurityToken | 1 | Embed certificate(s) into the BinarySecurityToken element |
cwecInSignedBinarySecurityToken | 2 | Embed certificate(s) into the BinarySecurityToken element and sign them |
cwecInBinarySecurityTokenAndSignature | 3 | Embed certificate(s) into the BinarySecurityToken element and the signature |
cwecNone | 4 | Don't embed certificate(s) into the BinarySecurityToken element or the signature |
Encoding Property (SOAPSigner Class)
Specifies XML encoding.
Syntax
public String getEncoding(); public void setEncoding(String encoding);
Default Value
""
Remarks
Use this property to specify the encoding to apply to the XML documents.
ExternalCrypto Property (SOAPSigner Class)
Provides access to external signing and DC parameters.
Syntax
public ExternalCrypto getExternalCrypto();
Remarks
Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).
This property is read-only.
Please refer to the ExternalCrypto type for a complete list of fields.FIPSMode Property (SOAPSigner Class)
Reserved.
Syntax
public boolean isFIPSMode(); public void setFIPSMode(boolean FIPSMode);
Default Value
False
Remarks
This property is reserved for future use.
IgnoreChainValidationErrors Property (SOAPSigner Class)
Makes the class tolerant to chain validation errors.
Syntax
public boolean isIgnoreChainValidationErrors(); public void setIgnoreChainValidationErrors(boolean ignoreChainValidationErrors);
Default Value
False
Remarks
If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.
InputBytes Property (SOAPSigner Class)
Use this property to pass the input to class in byte array form.
Syntax
public byte[] getInputBytes(); public void setInputBytes(byte[] inputBytes);
Remarks
Assign a byte array containing the data to be processed to this property.
This property is not available at design time.
InputFile Property (SOAPSigner Class)
Specifies the SOAP message to be signed.
Syntax
public String getInputFile(); public void setInputFile(String inputFile);
Default Value
""
Remarks
Provide a full path to the SOAP message to be signed.
InputStream Property (SOAPSigner Class)
A stream containing the SOAP message to be signed.
Syntax
public java.io.InputStream getInputStream(); public void setInputStream(java.io.InputStream inputStream);
Default Value
null
Remarks
Use this property to provide the SOAP message to the class in a stream.
This property is not available at design time.
KnownCertificates Property (SOAPSigner Class)
Additional certificates for chain validation.
Syntax
public CertificateList getKnownCertificates(); public void setKnownCertificates(CertificateList knownCertificates);
Remarks
Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.
The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.
Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.KnownCRLs Property (SOAPSigner Class)
Additional CRLs for chain validation.
Syntax
public CRLList getKnownCRLs(); public void setKnownCRLs(CRLList knownCRLs);
Remarks
Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.
This property is not available at design time.
Please refer to the CRL type for a complete list of fields.KnownOCSPs Property (SOAPSigner Class)
Additional OCSP responses for chain validation.
Syntax
public OCSPResponseList getKnownOCSPs(); public void setKnownOCSPs(OCSPResponseList knownOCSPs);
Remarks
Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.
This property is not available at design time.
Please refer to the OCSPResponse type for a complete list of fields.NewSignature Property (SOAPSigner Class)
Provides access to new signature properties.
Syntax
public SOAPSignature getNewSignature();
Remarks
Use this property to tune-up signature properties.
This property is read-only and not available at design time.
Please refer to the SOAPSignature type for a complete list of fields.OCSPs Property (SOAPSigner Class)
A collection of OCSP responses embedded into the signature.
Syntax
public OCSPResponseList getOCSPs();
Remarks
Use this property to access the OCSP responses embedded into the signature by its creator.
This property is read-only and not available at design time.
Please refer to the OCSPResponse type for a complete list of fields.OfflineMode Property (SOAPSigner Class)
Switches the class to offline mode.
Syntax
public boolean isOfflineMode(); public void setOfflineMode(boolean offlineMode);
Default Value
False
Remarks
When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.
Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.
OutputBytes Property (SOAPSigner Class)
Use this property to read the output the class object has produced.
Syntax
public byte[] getOutputBytes();
Remarks
Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.
This property is read-only and not available at design time.
OutputFile Property (SOAPSigner Class)
A file where the signed SOAP message will be saved.
Syntax
public String getOutputFile(); public void setOutputFile(String outputFile);
Default Value
""
Remarks
Provide a full path to the file where the signed SOAP message should be saved.
OutputStream Property (SOAPSigner Class)
A stream to write the signed SOAP message to.
Syntax
public java.io.OutputStream getOutputStream(); public void setOutputStream(java.io.OutputStream outputStream);
Default Value
null
Remarks
Use this property to specify the stream to save the signed SOAP message to.
This property is not available at design time.
Profile Property (SOAPSigner Class)
Specifies a pre-defined profile to apply when creating the signature.
Syntax
public String getProfile(); public void setProfile(String profile);
Default Value
""
Remarks
Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.
Proxy Property (SOAPSigner Class)
The proxy server settings.
Syntax
public ProxySettings getProxy();
Remarks
Use this property to tune up the proxy server settings.
This property is read-only.
Please refer to the ProxySettings type for a complete list of fields.References Property (SOAPSigner Class)
A list of references to the data to be signed.
Syntax
public XMLReferenceList getReferences();
Remarks
Electronic signature is computed over a set of data pieces. Each piece of data to be signed is specified by a reference.
This property is read-only and not available at design time.
Please refer to the XMLReference type for a complete list of fields.RevocationCheck Property (SOAPSigner Class)
Specifies the kind(s) of revocation check to perform for all chain certificates.
Syntax
public int getRevocationCheck(); public void setRevocationCheck(int revocationCheck); Enumerated values: public final static int crcNone = 0; public final static int crcAuto = 1; public final static int crcAllCRL = 2; public final static int crcAllOCSP = 3; public final static int crcAllCRLAndOCSP = 4; public final static int crcAnyCRL = 5; public final static int crcAnyOCSP = 6; public final static int crcAnyCRLOrOCSP = 7; public final static int crcAnyOCSPOrCRL = 8;
Default Value
1
Remarks
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.
crcNone | 0 | No revocation checking. |
crcAuto | 1 | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL | 2 | All provided CRL endpoints will be checked, and all checks must succeed. |
crcAllOCSP | 3 | All provided OCSP endpoints will be checked, and all checks must succeed. |
crcAllCRLAndOCSP | 4 | All provided CRL and OCSP endpoints will be checked, and all checks must succeed. |
crcAnyCRL | 5 | All provided CRL endpoints will be checked, and at least one check must succeed. |
crcAnyOCSP | 6 | All provided OCSP endpoints will be checked, and at least one check must succeed. |
crcAnyCRLOrOCSP | 7 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL | 8 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.
Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.
SecurityHeaderIndex Property (SOAPSigner Class)
Specifies the SecurityHeader index.
Syntax
public int getSecurityHeaderIndex(); public void setSecurityHeaderIndex(int securityHeaderIndex);
Default Value
-1
Remarks
Use this property to specify the index of SecurityHeader element where to put the signature. If the specified SecurityHeader element doesn't exist then a new SecurityHeader element will be created. The default value is "-1", in this case a new SecurityHeader element will be always created.
Signatures Property (SOAPSigner Class)
Provides details of all signatures found in the SOAP message.
Syntax
public SOAPSignatureList getSignatures();
Remarks
Use this property to get the details of all the signatures identified in the message.
This property is read-only and not available at design time.
Please refer to the SOAPSignature type for a complete list of fields.SigningCertificate Property (SOAPSigner Class)
The certificate to be used for signing.
Syntax
public Certificate getSigningCertificate(); public void setSigningCertificate(Certificate signingCertificate);
Remarks
Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.SigningChain Property (SOAPSigner Class)
The signing certificate chain.
Syntax
public CertificateList getSigningChain(); public void setSigningChain(CertificateList signingChain);
Remarks
Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.SocketSettings Property (SOAPSigner Class)
Manages network connection settings.
Syntax
public SocketSettings getSocketSettings();
Remarks
Use this property to tune up network connection parameters.
This property is read-only.
Please refer to the SocketSettings type for a complete list of fields.Timestamps Property (SOAPSigner Class)
Contains a collection of timestamps for the processed document.
Syntax
public TimestampInfoList getTimestamps();
Remarks
Use this property to access the timestamps included in the processed document.
This property is read-only and not available at design time.
Please refer to the TimestampInfo type for a complete list of fields.TimestampServer Property (SOAPSigner Class)
The address of the timestamping server.
Syntax
public String getTimestampServer(); public void setTimestampServer(String timestampServer);
Default Value
""
Remarks
Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.
SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.
If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:
http://user:password@timestamp.server.com/TsaService
For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.
If this property is left empty, no timestamp will be added to the signature.
Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.
To employ the virtual service, assign an URI of the following format to this property:
virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256&ignorenonce=true
Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:
component.Config("TimestampResponse=308208ab...");
Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.
The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.
The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.
The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.
The ignorenonce parameter allows you to switch off client nonce verification to enable compatibility with TSA services that do not support nonce mirroring.
All the parameters are optional.
TLSClientChain Property (SOAPSigner Class)
The TLS client certificate chain.
Syntax
public CertificateList getTLSClientChain(); public void setTLSClientChain(CertificateList TLSClientChain);
Remarks
Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.
Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.TLSServerChain Property (SOAPSigner Class)
The TLS server's certificate chain.
Syntax
public CertificateList getTLSServerChain();
Remarks
Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.
This property is read-only and not available at design time.
Please refer to the Certificate type for a complete list of fields.TLSSettings Property (SOAPSigner Class)
Manages TLS layer settings.
Syntax
public TLSSettings getTLSSettings();
Remarks
Use this property to tune up the TLS layer parameters.
This property is read-only.
Please refer to the TLSSettings type for a complete list of fields.TrustedCertificates Property (SOAPSigner Class)
A list of trusted certificates for chain validation.
Syntax
public CertificateList getTrustedCertificates(); public void setTrustedCertificates(CertificateList trustedCertificates);
Remarks
Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.
The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.
Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.
This property is not available at design time.
Please refer to the Certificate type for a complete list of fields.ValidationMoment Property (SOAPSigner Class)
The time point at which signature validity is to be established.
Syntax
public String getValidationMoment(); public void setValidationMoment(String validationMoment);
Default Value
""
Remarks
Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).
The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.
AddBodyReference Method (SOAPSigner Class)
Creates a new XML reference to the Body element of the SOAP message.
Syntax
public int addBodyReference(String customId, boolean autoGenerateId);
Remarks
Use this method to add a reference to the Body element of the SOAP message.
The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.
Use CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm to use.
The method returns the index of the new reference entry in the References collection.
AddDataReference Method (SOAPSigner Class)
Creates a new XML reference to the specified data.
Syntax
public int addDataReference(String dataURI, byte[] data);
Remarks
Use this method to add a reference to the custom data. Pass the reference's URI via DataURI parameter.
Use HashAlgorithm property to specify the hash algorithm to use.
The method returns the index of the new reference entry in the References collection.
AddKnownNamespace Method (SOAPSigner Class)
Adds known prefix and correspondent namespace URI.
Syntax
public void addKnownNamespace(String prefix, String URI);
Remarks
Use this method to add a known prefix and namespace URI that are used in XPath expression within XMLElement/XMLNode property, and within TargetXMLElement and XPathPrefixList properties of the references.
AddReference Method (SOAPSigner Class)
Creates a new XML reference to the specified XML element.
Syntax
public int addReference(String targetXmlElement, String customId, boolean autoGenerateId);
Remarks
Use this method to add a reference to a particular XML element.
The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.
Use CanonicalizationMethod and HashAlgorithm properties to specify the canonicalization method and hash algorithm to use.
The method returns the index of the new reference entry in the References collection.
Close Method (SOAPSigner Class)
Closes an opened SOAP message.
Syntax
public void close(boolean saveChanges);
Remarks
Use this method to close a previously opened SOAP message. Set SaveChanges to true to apply any changes made.
Config Method (SOAPSigner Class)
Sets or retrieves a configuration setting.
Syntax
public String config(String configurationString);
Remarks
Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.
These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.
To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).
To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.
DoAction Method (SOAPSigner Class)
Performs an additional action.
Syntax
public String doAction(String actionID, String actionParams);
Remarks
DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.
The unique identifier (case insensitive) of the action is provided in the ActionID parameter.
ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....
ExtractAsyncData Method (SOAPSigner Class)
Extracts user data from the DC signing service response.
Syntax
public String extractAsyncData(String asyncReply);
Remarks
Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.
The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.
GetInnerXML Method (SOAPSigner Class)
Get the inner XML content of the selected XML element.
Syntax
public String getInnerXML(String XPath);
Remarks
Call this method to get the inner XML content of the selected XML element.
GetOuterXML Method (SOAPSigner Class)
Get the outer XML content of the selected XML element.
Syntax
public String getOuterXML(String XPath);
Remarks
Call this method to get the outer XML content of the selected XML element.
GetTextContent Method (SOAPSigner Class)
Get the text content of the selected XML element.
Syntax
public String getTextContent(String XPath);
Remarks
Call this method to get the text content of the selected XML element.
Open Method (SOAPSigner Class)
Opens a document for signing or updating.
Syntax
public void open();
Remarks
Use this method to open a document for signing or updating. When finished, call Close to complete or discard the operation.
Reset Method (SOAPSigner Class)
Resets the class settings.
Syntax
public void reset();
Remarks
Reset is a generic method available in every class.
Revalidate Method (SOAPSigner Class)
Revalidates a signature in accordance with current settings.
Syntax
public void revalidate(String sigLabel);
Remarks
Use this method to re-validate a signature in the opened SOAP message.
SelectInfo Method (SOAPSigner Class)
Select signature information for a specific entity.
Syntax
public void selectInfo(String entityLabel, int infoType, boolean clearSelection);
Remarks
Use this method to select (or filter) signature-related information for a specific signature element.
Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:
sitEntity | 1 | Select the current entity |
sitParentEntity | 2 | Select the parent entity of the current entity |
sitTimestamps | 4 | Select all timestamps covering the current entity |
sitSignatures | 8 | Select all signatures covering the current entity |
sitSigningChain | 16 | Select the signing chain of the current entity |
sitEmbeddedCertificates | 256 | Select all certificates embedded in the current entity |
sitEmbeddedCRLs | 512 | Select all CRLs embedded in the current entity |
sitEmbeddedOCSPs | 1024 | Select all OCSP responses embedded in the current entity |
sitEmbeddedRevInfo | 1792 | Select the whole pack of embedded revocation information (certificates, CRLs and OCSPs) |
sitUsedCertificates | 4096 | Select all the certificates used to validate this entity's chain |
sitUsedCRLs | 8192 | Select all the CRLs used to validate this entity's chain |
sitUsedOCSPs | 16384 | Select all the OCSP responses used to validate this entity's chain |
sitUsedRevInfo | 28672 | Select the whole pack of revocation information used to validate this entity's chain (certificates, CRLs, OCSP responses) |
sitAttributes | 65536 | Select this entity's CMS attributes |
sitReferences | 131072 | Select this entity's XML references |
sitSignedParts | 262144 | Select this entity's signed parts |
Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to SelectInfo and keeping ClearSelection set to false.
This method is useful if you would like to read/display detailed information about a particular signature or timestamp.
SetInnerXML Method (SOAPSigner Class)
Set the inner XML content of the selected XML element.
Syntax
public void setInnerXML(String XPath, String value);
Remarks
Call this method to set the inner XML content of the selected XML element.
SetTextContent Method (SOAPSigner Class)
Set the text content of the selected XML element.
Syntax
public void setTextContent(String XPath, String value);
Remarks
Call this method to set the text content of the selected XML element.
Sign Method (SOAPSigner Class)
Signs the SOAP message.
Syntax
public void sign();
Remarks
Call this method to generate a signed SOAP message.
SignAsyncBegin Method (SOAPSigner Class)
Initiates the asynchronous signing operation.
Syntax
public String signAsyncBegin();
Remarks
When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.
Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.
Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.
Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.
AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.
In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.
SignAsyncEnd Method (SOAPSigner Class)
Completes the asynchronous signing operation.
Syntax
public void signAsyncEnd(String asyncReply);
Remarks
When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.
Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).
Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.
Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.
AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.
In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.
SignExternal Method (SOAPSigner Class)
Signs the document using an external signing facility.
Syntax
public void signExternal();
Remarks
Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.
When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.
Timestamp Method (SOAPSigner Class)
Use this method to add an timestamp.
Syntax
public void timestamp(String sigLabel, int timestampType);
Remarks
Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. This method could be called separately or in SignatureValidated event handler after successful signature validation. Use the TimestampType parameter to specify the type of timestamp to create
Supported timestamp types:
tstSignature | 12 | Signature timestamp |
tstRefsOnly | 13 | RefsOnly timestamp |
tstSigAndRefs | 14 | SigAndRefs timestamp |
tstArchive | 7 | Archive timestamp |
Upgrade Method (SOAPSigner Class)
Upgrades existing XAdES signature to a new form.
Syntax
public void upgrade(String sigLabel, int upgradeKind);
Remarks
XAdES standard defines a number of different 'forms' of signatures which can be used for different purposes. Use this method to upgrade XAdES signature to a new form or level specified by UpgradeKind. Signatures can normally be upgraded from less sophisticated levels (BES, EPES) to more sophisticated (T, C, X, X-L, A).
The supported levels and forms are:
aslUnknown | 0 | Unknown signature level |
aslGeneric | 1 | Generic (this value applicable to XAdES signature only and corresponds to XML-DSIG signature) |
aslBaselineB | 2 | Baseline B (B-B, basic) |
aslBaselineT | 3 | Baseline T (B-T, timestamped) |
aslBaselineLT | 4 | Baseline LT (B-LT, long-term) |
aslBaselineLTA | 5 | Baseline LTA (B-LTA, long-term with archived timestamp) |
aslBES | 6 | BES (Basic Electronic Signature) |
aslEPES | 7 | EPES (Electronic Signature with an Explicit Policy) |
aslT | 8 | T (Timestamped) |
aslC | 9 | C (T with revocation references) |
aslX | 10 | X (C with SigAndRefs timestamp or RefsOnly timestamp) (this value applicable to XAdES signature only) |
aslXType1 | 11 | X Type 1 (C with an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXType2 | 12 | X Type 2 (C with a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslXL | 13 | X-L (X with revocation values) (this value applicable to XAdES signature only) |
aslXLType1 | 14 | X-L Type 1 (C with revocation values and an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXLType2 | 15 | X-L Type 2 (C with revocation values and a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslA | 16 | A (archived) |
aslExtendedBES | 17 | Extended BES |
aslExtendedEPES | 18 | Extended EPES |
aslExtendedT | 19 | Extended T |
aslExtendedC | 20 | Extended C |
aslExtendedX | 21 | Extended X (this value applicable to XAdES signature only) |
aslExtendedXType1 | 22 | Extended X (type 1) (this value applicable to CAdES signature only) |
aslExtendedXType2 | 23 | Extended X (type 2) (this value applicable to CAdES signature only) |
aslExtendedXLong | 24 | Extended X-Long (this value applicable to XAdES signature only) |
aslExtendedXL | 25 | Extended X-L (this value applicable to XAdES signature only) |
aslExtendedXLType1 | 26 | Extended XL (type 1) (this value applicable to CAdES signature only) |
aslExtendedXLType2 | 27 | Extended XL (type 2) (this value applicable to CAdES signature only) |
aslExtendedA | 28 | Extended A |
The supported additional upgrade kinds are:
xukAddValidationDataRefs | 256 | Add signature validation references |
xukAddValidationDataValues | 512 | Add signature validation values |
xukAddTimestampValidationData | 1024 | Add timestamp validation data |
ChainElementDownload Event (SOAPSigner Class)
Fires when there is a need to download a chain element from an online source.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void chainElementDownload(SOAPSignerChainElementDownloadEvent e) {} ... } public class SOAPSignerChainElementDownloadEvent { public int kind; public String certRDN; public String CACertRDN; public String location; public int action; //read-write }
Remarks
Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.
veaAuto | 0 | Handle the action automatically (the default behaviour) |
veaContinue | 1 | Accept the request implied by the event (accept the certificate, allow the object retrieval) |
veaReject | 2 | Reject the request implied by the event (reject the certificate, disallow the object retrieval) |
veaAcceptNow | 3 | Accept the validated certificate immediately |
veaAbortNow | 4 | Abort the validation, reject the certificate |
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainElementNeeded Event (SOAPSigner Class)
Fires when an element required to validate the chain was not located.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void chainElementNeeded(SOAPSignerChainElementNeededEvent e) {} ... } public class SOAPSignerChainElementNeededEvent { public int kind; public String certRDN; public String CACertRDN; }
Remarks
Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainElementStore Event (SOAPSigner Class)
This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void chainElementStore(SOAPSignerChainElementStoreEvent e) {} ... } public class SOAPSignerChainElementStoreEvent { public int kind; public byte[] body; public String URI; //read-write }
Remarks
This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.
cekUnknown | 0 | Unknown or unsupported element type |
cekCertificate | 1 | An X.509 certificate |
cekCRL | 2 | A CRL |
cekOCSP | 3 | An OCSP response |
ChainValidated Event (SOAPSigner Class)
Reports the completion of a certificate chain validation.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void chainValidated(SOAPSignerChainValidatedEvent e) {} ... } public class SOAPSignerChainValidatedEvent { public int index; public String entityLabel; public String subjectRDN; public int validationResult; public int validationDetails; public boolean cancel; //read-write }
Remarks
This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.
ValidationResult set to 0 (zero) indicates successful chain validation.
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationProgress Event (SOAPSigner Class)
This event is fired multiple times during chain validation to report various stages of the validation procedure.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void chainValidationProgress(SOAPSignerChainValidationProgressEvent e) {} ... } public class SOAPSignerChainValidationProgressEvent { public String eventKind; public String certRDN; public String CACertRDN; public int action; //read-write }
Remarks
Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.
The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.
veaAuto | 0 | Handle the action automatically (the default behaviour) |
veaContinue | 1 | Accept the request implied by the event (accept the certificate, allow the object retrieval) |
veaReject | 2 | Reject the request implied by the event (reject the certificate, disallow the object retrieval) |
veaAcceptNow | 3 | Accept the validated certificate immediately |
veaAbortNow | 4 | Abort the validation, reject the certificate |
Error Event (SOAPSigner Class)
Information about errors during signing.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void error(SOAPSignerErrorEvent e) {} ... } public class SOAPSignerErrorEvent { public int errorCode; public String description; }
Remarks
The event is fired in case of exceptional conditions during signing.
ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to SOAP.
ExternalSign Event (SOAPSigner Class)
Handles remote or external signing initiated by the SignExternal method or other source.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void externalSign(SOAPSignerExternalSignEvent e) {} ... } public class SOAPSignerExternalSignEvent { public String operationId; public String hashAlgorithm; public String pars; public String data; public String signedData; //read-write }
Remarks
Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.
The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.
OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.
The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.
A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16
A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following:
signer.OnExternalSign += (s, e) =>
{
var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable);
var key = (RSACryptoServiceProvider)cert.PrivateKey;
var dataToSign = e.Data.FromBase16String();
var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1");
e.SignedData = signedData.ToBase16String();
};
FormatElement Event (SOAPSigner Class)
Reports the XML element that is currently being processed.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void formatElement(SOAPSignerFormatElementEvent e) {} ... } public class SOAPSignerFormatElementEvent { public String startTagWhitespace; //read-write public String endTagWhitespace; //read-write public int level; public String path; public boolean hasChildElements; }
Remarks
Path and Level specify the path to the XML element being processed and its nesting level, respectively.
HasChildElements specify if processed XML element has child elements.
Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.
FormatText Event (SOAPSigner Class)
Reports XML text that is currently being processed.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void formatText(SOAPSignerFormatTextEvent e) {} ... } public class SOAPSignerFormatTextEvent { public String text; //read-write public int textType; public int level; public String path; }
Remarks
TextType parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; Path and Level specify the path to the XML element and its nesting level.
Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.
MessageLoaded Event (SOAPSigner Class)
This event is fired when the message has been loaded into memory.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void messageLoaded(SOAPSignerMessageLoadedEvent e) {} ... } public class SOAPSignerMessageLoadedEvent { public boolean cancel; //read-write }
Remarks
The handler for this event is a good place to check message properties, which may be useful when preparing the signature.
Set Cancel to true to terminate message processing on this stage.
Notification Event (SOAPSigner Class)
This event notifies the application about an underlying control flow event.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void notification(SOAPSignerNotificationEvent e) {} ... } public class SOAPSignerNotificationEvent { public String eventID; public String eventParam; }
Remarks
The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.
The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.
This class can fire this event with the following EventID values:
BeforeTimestamp | This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings. |
TimestampError | This event is only fired if the class failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info. |
TimestampRequest | A timestamp is requested from the custom timestamping
authority. This event is only fired if TimestampServer was set to a
virtual:// URI. The EventParam parameter contains the
TSP request (or the plain hash, depending on the value provided to
TimestampServer), in base16, that needs to be sent to the TSA.
Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property. |
ReferenceValidated Event (SOAPSigner Class)
Marks the end of a reference validation.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void referenceValidated(SOAPSignerReferenceValidatedEvent e) {} ... } public class SOAPSignerReferenceValidatedEvent { public int referenceIndex; public String ID; public String URI; public String refType; public boolean digestValid; }
Remarks
The class fires this event to report completion of a reference validation. A reference is a building block of a signature as it binds signature coverage to a particular piece of the document.
ResolveReference Event (SOAPSigner Class)
Asks the application to resolve a reference.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void resolveReference(SOAPSignerResolveReferenceEvent e) {} ... } public class SOAPSignerResolveReferenceEvent { public int referenceIndex; public String URI; }
Remarks
This event is fired when the control could not automatically resolve a reference and requires custom treatment.
URI contains a reference to the data.
ReferenceIndex specifies the index of the reference to process.
Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.
SignatureFound Event (SOAPSigner Class)
Signifies the start of signature validation.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void signatureFound(SOAPSignerSignatureFoundEvent e) {} ... } public class SOAPSignerSignatureFoundEvent { public int index; public String entityLabel; public String issuerRDN; public byte[] serialNumber; public byte[] subjectKeyID; public boolean certFound; public boolean validateSignature; //read-write public boolean validateChain; //read-write }
Remarks
This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.
The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.
Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the SignatureValidationResult and ChainValidationResult properties respectively.
Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.
SignatureValidated Event (SOAPSigner Class)
Marks the completion of the signature validation routine.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void signatureValidated(SOAPSignerSignatureValidatedEvent e) {} ... } public class SOAPSignerSignatureValidatedEvent { public int index; public String entityLabel; public String issuerRDN; public byte[] serialNumber; public byte[] subjectKeyID; public int validationResult; public boolean cancel; //read-write }
Remarks
This event is fired upon the completion of the signature validation routine, and reports the respective validation result.
Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.
ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
TimestampFound Event (SOAPSigner Class)
Signifies the start of a timestamp validation routine.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void timestampFound(SOAPSignerTimestampFoundEvent e) {} ... } public class SOAPSignerTimestampFoundEvent { public int index; public String entityLabel; public String issuerRDN; public byte[] serialNumber; public byte[] subjectKeyID; public boolean certFound; public boolean validateTimestamp; //read-write public boolean validateChain; //read-write }
Remarks
This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.
The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.
Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the ValidationResult and ChainValidationResult properties respectively.
Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.
TimestampRequest Event (SOAPSigner Class)
Fires when the class is ready to request a timestamp from an external TSA.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void timestampRequest(SOAPSignerTimestampRequestEvent e) {} ... } public class SOAPSignerTimestampRequestEvent { public String TSA; public String timestampRequest; public String timestampResponse; //read-write public boolean suppressDefault; //read-write }
Remarks
Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.
The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.
TimestampValidated Event (SOAPSigner Class)
Reports the completion of the timestamp validation routine.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void timestampValidated(SOAPSignerTimestampValidatedEvent e) {} ... } public class SOAPSignerTimestampValidatedEvent { public int index; public String entityLabel; public String issuerRDN; public byte[] serialNumber; public byte[] subjectKeyID; public String time; public int validationResult; public int chainValidationResult; public int chainValidationDetails; public boolean cancel; //read-write }
Remarks
This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.
ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
TLSCertNeeded Event (SOAPSigner Class)
Fires when a remote TLS party requests a client certificate.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void TLSCertNeeded(SOAPSignerTLSCertNeededEvent e) {} ... } public class SOAPSignerTLSCertNeededEvent { public String host; public String CANames; }
Remarks
This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.
Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.
This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.
TLSCertValidate Event (SOAPSigner Class)
This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void TLSCertValidate(SOAPSignerTLSCertValidateEvent e) {} ... } public class SOAPSignerTLSCertValidateEvent { public String serverHost; public String serverIP; public boolean accept; //read-write }
Remarks
This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.
Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.
TLSEstablished Event (SOAPSigner Class)
Fires when a TLS handshake with Host successfully completes.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void TLSEstablished(SOAPSignerTLSEstablishedEvent e) {} ... } public class SOAPSignerTLSEstablishedEvent { public String host; public String version; public String ciphersuite; public byte[] connectionId; public boolean abort; //read-write }
Remarks
The class uses this event to notify the application about a successful completion of a TLS handshake.
The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.
TLSHandshake Event (SOAPSigner Class)
Fires when a new TLS handshake is initiated, before the handshake commences.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void TLSHandshake(SOAPSignerTLSHandshakeEvent e) {} ... } public class SOAPSignerTLSHandshakeEvent { public String host; public boolean abort; //read-write }
Remarks
The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.
TLSShutdown Event (SOAPSigner Class)
Reports the graceful closure of a TLS connection.
Syntax
public class DefaultSOAPSignerEventListener implements SOAPSignerEventListener { ... public void TLSShutdown(SOAPSignerTLSShutdownEvent e) {} ... } public class SOAPSignerTLSShutdownEvent { public String host; }
Remarks
This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.
Certificate Type
Encapsulates an individual X.509 certificate.
Remarks
This type keeps and provides access to X.509 certificate details.
Fields
Bytes
byte[] (read-only)
Default Value: ""
Returns the raw certificate data in DER format.
CA
boolean
Default Value: False
Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.
Set this field when generating a new certificate to have its Basic Constraints extension generated automatically.
CAKeyID
byte[] (read-only)
Default Value: ""
A unique identifier (fingerprint) of the CA certificate's cryptographic key.
Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.
This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the SubjectKeyID setting, and for lower-level certificates, from the parent certificate's subject key ID extension.
CertType
int (read-only)
Default Value: 0
Returns the type of the entity contained in the Certificate object.
A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.
Use the CertificateManager class to load or create new certificate and certificate requests objects.
CRLDistributionPoints
String
Default Value: ""
Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.
Use this field when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.
The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.
Curve
String
Default Value: ""
Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.
SB_EC_SECP112R1 | SECP112R1 | |
SB_EC_SECP112R2 | SECP112R2 | |
SB_EC_SECP128R1 | SECP128R1 | |
SB_EC_SECP128R2 | SECP128R2 | |
SB_EC_SECP160K1 | SECP160K1 | |
SB_EC_SECP160R1 | SECP160R1 | |
SB_EC_SECP160R2 | SECP160R2 | |
SB_EC_SECP192K1 | SECP192K1 | |
SB_EC_SECP192R1 | SECP192R1 | |
SB_EC_SECP224K1 | SECP224K1 | |
SB_EC_SECP224R1 | SECP224R1 | |
SB_EC_SECP256K1 | SECP256K1 | |
SB_EC_SECP256R1 | SECP256R1 | |
SB_EC_SECP384R1 | SECP384R1 | |
SB_EC_SECP521R1 | SECP521R1 | |
SB_EC_SECT113R1 | SECT113R1 | |
SB_EC_SECT113R2 | SECT113R2 | |
SB_EC_SECT131R1 | SECT131R1 | |
SB_EC_SECT131R2 | SECT131R2 | |
SB_EC_SECT163K1 | SECT163K1 | |
SB_EC_SECT163R1 | SECT163R1 | |
SB_EC_SECT163R2 | SECT163R2 | |
SB_EC_SECT193R1 | SECT193R1 | |
SB_EC_SECT193R2 | SECT193R2 | |
SB_EC_SECT233K1 | SECT233K1 | |
SB_EC_SECT233R1 | SECT233R1 | |
SB_EC_SECT239K1 | SECT239K1 | |
SB_EC_SECT283K1 | SECT283K1 | |
SB_EC_SECT283R1 | SECT283R1 | |
SB_EC_SECT409K1 | SECT409K1 | |
SB_EC_SECT409R1 | SECT409R1 | |
SB_EC_SECT571K1 | SECT571K1 | |
SB_EC_SECT571R1 | SECT571R1 | |
SB_EC_PRIME192V1 | PRIME192V1 | |
SB_EC_PRIME192V2 | PRIME192V2 | |
SB_EC_PRIME192V3 | PRIME192V3 | |
SB_EC_PRIME239V1 | PRIME239V1 | |
SB_EC_PRIME239V2 | PRIME239V2 | |
SB_EC_PRIME239V3 | PRIME239V3 | |
SB_EC_PRIME256V1 | PRIME256V1 | |
SB_EC_C2PNB163V1 | C2PNB163V1 | |
SB_EC_C2PNB163V2 | C2PNB163V2 | |
SB_EC_C2PNB163V3 | C2PNB163V3 | |
SB_EC_C2PNB176W1 | C2PNB176W1 | |
SB_EC_C2TNB191V1 | C2TNB191V1 | |
SB_EC_C2TNB191V2 | C2TNB191V2 | |
SB_EC_C2TNB191V3 | C2TNB191V3 | |
SB_EC_C2ONB191V4 | C2ONB191V4 | |
SB_EC_C2ONB191V5 | C2ONB191V5 | |
SB_EC_C2PNB208W1 | C2PNB208W1 | |
SB_EC_C2TNB239V1 | C2TNB239V1 | |
SB_EC_C2TNB239V2 | C2TNB239V2 | |
SB_EC_C2TNB239V3 | C2TNB239V3 | |
SB_EC_C2ONB239V4 | C2ONB239V4 | |
SB_EC_C2ONB239V5 | C2ONB239V5 | |
SB_EC_C2PNB272W1 | C2PNB272W1 | |
SB_EC_C2PNB304W1 | C2PNB304W1 | |
SB_EC_C2TNB359V1 | C2TNB359V1 | |
SB_EC_C2PNB368W1 | C2PNB368W1 | |
SB_EC_C2TNB431R1 | C2TNB431R1 | |
SB_EC_NISTP192 | NISTP192 | |
SB_EC_NISTP224 | NISTP224 | |
SB_EC_NISTP256 | NISTP256 | |
SB_EC_NISTP384 | NISTP384 | |
SB_EC_NISTP521 | NISTP521 | |
SB_EC_NISTB163 | NISTB163 | |
SB_EC_NISTB233 | NISTB233 | |
SB_EC_NISTB283 | NISTB283 | |
SB_EC_NISTB409 | NISTB409 | |
SB_EC_NISTB571 | NISTB571 | |
SB_EC_NISTK163 | NISTK163 | |
SB_EC_NISTK233 | NISTK233 | |
SB_EC_NISTK283 | NISTK283 | |
SB_EC_NISTK409 | NISTK409 | |
SB_EC_NISTK571 | NISTK571 | |
SB_EC_GOSTCPTEST | GOSTCPTEST | |
SB_EC_GOSTCPA | GOSTCPA | |
SB_EC_GOSTCPB | GOSTCPB | |
SB_EC_GOSTCPC | GOSTCPC | |
SB_EC_GOSTCPXCHA | GOSTCPXCHA | |
SB_EC_GOSTCPXCHB | GOSTCPXCHB | |
SB_EC_BRAINPOOLP160R1 | BRAINPOOLP160R1 | |
SB_EC_BRAINPOOLP160T1 | BRAINPOOLP160T1 | |
SB_EC_BRAINPOOLP192R1 | BRAINPOOLP192R1 | |
SB_EC_BRAINPOOLP192T1 | BRAINPOOLP192T1 | |
SB_EC_BRAINPOOLP224R1 | BRAINPOOLP224R1 | |
SB_EC_BRAINPOOLP224T1 | BRAINPOOLP224T1 | |
SB_EC_BRAINPOOLP256R1 | BRAINPOOLP256R1 | |
SB_EC_BRAINPOOLP256T1 | BRAINPOOLP256T1 | |
SB_EC_BRAINPOOLP320R1 | BRAINPOOLP320R1 | |
SB_EC_BRAINPOOLP320T1 | BRAINPOOLP320T1 | |
SB_EC_BRAINPOOLP384R1 | BRAINPOOLP384R1 | |
SB_EC_BRAINPOOLP384T1 | BRAINPOOLP384T1 | |
SB_EC_BRAINPOOLP512R1 | BRAINPOOLP512R1 | |
SB_EC_BRAINPOOLP512T1 | BRAINPOOLP512T1 | |
SB_EC_CURVE25519 | CURVE25519 | |
SB_EC_CURVE448 | CURVE448 |
Fingerprint
String (read-only)
Default Value: ""
Contains the fingerprint (a hash imprint) of this certificate.
While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.
FriendlyName
String (read-only)
Default Value: ""
Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.
HashAlgorithm
String
Default Value: ""
Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use SigAlgorithm to find out the hash algorithm that is part of the certificate signature.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
Issuer
String (read-only)
Default Value: ""
The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via IssuerRDN.
IssuerRDN
String
Default Value: ""
A list of Property=Value pairs that uniquely identify the certificate issuer.
Example: /C=US/O=Nationwide CA/CN=Web Certification Authority
KeyAlgorithm
String
Default Value: "0"
Specifies the public key algorithm of this certificate.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
Use the KeyBits, Curve, and PublicKeyBytes fields to get more details about the key the certificate contains.
KeyBits
int (read-only)
Default Value: 0
Returns the length of the public key in bits.
This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the PublicKeyBytes or PrivateKeyBytes field would typically contain auxiliary values, and therefore be longer.
KeyFingerprint
String (read-only)
Default Value: ""
Returns a SHA1 fingerprint of the public key contained in the certificate.
Note that the key fingerprint is different from the certificate fingerprint accessible via the Fingerprint field. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.
KeyUsage
int
Default Value: 0
Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
This value is a bit mask of the following values:
ckuUnknown | 0x00000 | Unknown key usage |
ckuDigitalSignature | 0x00001 | Digital signature |
ckuNonRepudiation | 0x00002 | Non-repudiation |
ckuKeyEncipherment | 0x00004 | Key encipherment |
ckuDataEncipherment | 0x00008 | Data encipherment |
ckuKeyAgreement | 0x00010 | Key agreement |
ckuKeyCertSign | 0x00020 | Certificate signing |
ckuCRLSign | 0x00040 | Revocation signing |
ckuEncipherOnly | 0x00080 | Encipher only |
ckuDecipherOnly | 0x00100 | Decipher only |
ckuServerAuthentication | 0x00200 | Server authentication |
ckuClientAuthentication | 0x00400 | Client authentication |
ckuCodeSigning | 0x00800 | Code signing |
ckuEmailProtection | 0x01000 | Email protection |
ckuTimeStamping | 0x02000 | Timestamping |
ckuOCSPSigning | 0x04000 | OCSP signing |
ckuSmartCardLogon | 0x08000 | Smartcard logon |
ckuKeyPurposeClientAuth | 0x10000 | Kerberos - client authentication |
ckuKeyPurposeKDC | 0x20000 | Kerberos - KDC |
Set this field before generating the certificate to propagate the key usage flags to the new certificate.
KeyValid
boolean (read-only)
Default Value: False
Returns True if the certificate's key is cryptographically valid, and False otherwise.
OCSPLocations
String
Default Value: ""
Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.
Set this field before calling the certificate manager's Generate method to propagate it to the new certificate.
The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.
OCSPNoCheck
boolean
Default Value: False
Accessor to the value of the certificate's ocsp-no-check extension.
Origin
int (read-only)
Default Value: 0
Returns the location that the certificate was taken or loaded from.
PolicyIDs
String
Default Value: ""
Contains identifiers (OIDs) of the applicable certificate policies.
The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.
Set this field when generating a certificate to propagate the policies information to the new certificate.
The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.
PrivateKeyBytes
byte[] (read-only)
Default Value: ""
Returns the certificate's private key in DER-encoded format. It is normal for this field to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.
PrivateKeyExists
boolean (read-only)
Default Value: False
Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.
This field is independent from PrivateKeyBytes, and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.
PrivateKeyExtractable
boolean (read-only)
Default Value: False
Indicates whether the private key is extractable (exportable).
PublicKeyBytes
byte[] (read-only)
Default Value: ""
Contains the certificate's public key in DER format.
This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.
Qualified
boolean (read-only)
Default Value: False
Indicates whether the certificate is qualified.
This property is set to True if the certificate is confirmed by a Trusted List to be qualified.
QualifiedStatements
int
Default Value: 0
Returns a simplified qualified status of the certificate.
Qualifiers
String (read-only)
Default Value: ""
A list of qualifiers.
Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.
SelfSigned
boolean (read-only)
Default Value: False
Indicates whether the certificate is self-signed (root) or signed by an external CA.
SerialNumber
byte[]
Default Value: ""
Returns the certificate's serial number.
The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.
SigAlgorithm
String (read-only)
Default Value: ""
Indicates the algorithm that was used by the CA to sign this certificate.
A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.
Source
int (read-only)
Default Value: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
Subject
String (read-only)
Default Value: ""
The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via SubjectRDN.
SubjectAlternativeName
String
Default Value: ""
Returns or sets the value of the Subject Alternative Name extension of the certificate.
Subject alternative names are used to provide additional names that are impractical to store in the main SubjectRDN field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.
The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.
SubjectKeyID
byte[]
Default Value: ""
Contains a unique identifier of the certificate's cryptographic key.
Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.
The SubjectKeyID and CAKeyID fields of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.
SubjectRDN
String
Default Value: ""
A list of Property=Value pairs that uniquely identify the certificate holder (subject).
Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.
Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.
Valid
boolean (read-only)
Default Value: False
Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.
ValidFrom
String
Default Value: ""
The time point at which the certificate becomes valid, in UTC.
ValidTo
String
Default Value: ""
The time point at which the certificate expires, in UTC.
Constructors
public Certificate( bytes, startIndex, count, password);
Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively. Password is a password encrypting the certificate.
public Certificate( certBytes, certStartIndex, certCount, keyBytes, keyStartIndex, keyCount, password);
Loads the X.509 certificate from a memory buffer.
CertBytes is a buffer containing the raw certificate data. CertStartIndex and CertCount specify the starting position and number of bytes to be read from the buffer, respectively.
KeyBytes is a buffer containing the private key data. KeyStartIndex and KeyCount specify the starting position and number of bytes to be read from the buffer, respectively.
Password is a password encrypting the certificate.
public Certificate( bytes, startIndex, count);
Loads the X.509 certificate from a memory buffer. Bytes is a buffer containing the raw certificate data. StartIndex and Count specify the starting position and number of bytes to be read from the buffer, respectively.
public Certificate( path, password);
Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data. Password is a password encrypting the certificate.
public Certificate( certPath, keyPath, password);
Loads the X.509 certificate from a file. CertPath specifies the full path to the file containing the certificate data. KeyPath specifies the full path to the file containing the private key. Password is a password encrypting the certificate.
public Certificate( path);
Loads the X.509 certificate from a file. Path specifies the full path to the file containing the certificate data.
public Certificate( stream);
Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.
public Certificate( stream, password);
Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data. Password is a password encrypting the certificate.
public Certificate( certStream, keyStream, password);
Loads the X.509 certificate from a stream. CertStream is a stream containing the certificate data. KeyStream is a stream containing the private key. Password is a password encrypting the certificate.
public Certificate();
Creates a new object with default field values.
CRL Type
Represents a Certificate Revocation List.
Remarks
CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.
Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.
Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.
Fields
Bytes
byte[] (read-only)
Default Value: ""
Returns the raw CRL data in DER format.
CAKeyID
byte[]
Default Value: ""
A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.
EntryCount
int (read-only)
Default Value: 0
Returns the number of certificate status entries in the CRL.
Issuer
String (read-only)
Default Value: ""
The common name of the CRL issuer (CA), typically a company name.
IssuerRDN
String (read-only)
Default Value: ""
A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.
Location
String (read-only)
Default Value: ""
The URL that the CRL was downloaded from.
NextUpdate
String
Default Value: ""
The planned time and date of the next version of this CRL to be published.
SigAlgorithm
String
Default Value: "0"
The public key algorithm that was used by the CA to sign this CRL.
Source
int (read-only)
Default Value: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
TBS
byte[] (read-only)
Default Value: ""
The to-be-signed part of the CRL (the CRL without the signature part).
ThisUpdate
String
Default Value: ""
The date and time at which this version of the CRL was published.
Constructors
public CRL( bytes, startIndex, count);
Creates a CRL object from a memory buffer. Bytes is a buffer containing raw (DER) CRL data, StartIndex and Count specify the starting position and the length of the CRL data in the buffer, respectively.
public CRL( location);
Creates a CRL object by downloading it from a remote location.
public CRL( stream);
Creates a CRL object from data contained in a stream.
public CRL();
Creates an empty CRL object.
ExternalCrypto Type
Specifies the parameters of external cryptographic calls.
Remarks
External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.
Fields
AsyncDocumentID
String
Default Value: ""
Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.
If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.
CustomParams
String
Default Value: ""
Custom parameters to be passed to the signing service (uninterpreted).
Data
String
Default Value: ""
Additional data to be included in the async state and mirrored back by the requestor.
ExternalHashCalculation
boolean
Default Value: False
Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.
If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.
HashAlgorithm
String
Default Value: "SHA256"
Specifies the request's signature hash algorithm.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
KeyID
String
Default Value: ""
The ID of the pre-shared key used for DC request authentication.
Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use KeySecret to pass the key itself.
The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.
Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.
Example:
signer.ExternalCrypto.KeyID = "MainSigningKey";
signer.ExternalCrypto.KeySecret = "abcdef0123456789";
KeySecret
String
Default Value: ""
The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.
Read more about configuring authentication in the KeyID topic.
Method
int
Default Value: 0
Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.
Available options:
asmdPKCS1 | 0 |
asmdPKCS7 | 1 |
Mode
int
Default Value: 0
Specifies the external cryptography mode.
Available options:
ecmDefault | The default value (0) |
ecmDisabled | Do not use DC or external signing (1) |
ecmGeneric | Generic external signing with the OnExternalSign event (2) |
ecmDCAuth | DCAuth signing (3) |
ecmDCAuthJSON | DCAuth signing in JSON format (4) |
PublicKeyAlgorithm
String
Default Value: ""
Provide the public key algorithm here if the certificate is not available on the pre-signing stage.
SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION | rsaEncryption | |
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION | md2withRSAEncryption | |
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION | md5withRSAEncryption | |
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION | sha1withRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA | id-dsa | |
SB_CERT_ALGORITHM_ID_DSA_SHA1 | id-dsa-with-sha1 | |
SB_CERT_ALGORITHM_DH_PUBLIC | dhpublicnumber | |
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION | sha224WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION | sha256WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION | sha384WithRSAEncryption | |
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION | sha512WithRSAEncryption | |
SB_CERT_ALGORITHM_ID_RSAPSS | id-RSASSA-PSS | |
SB_CERT_ALGORITHM_ID_RSAOAEP | id-RSAES-OAEP | |
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160 | ripemd160withRSA | |
SB_CERT_ALGORITHM_ID_ELGAMAL | elGamal | |
SB_CERT_ALGORITHM_SHA1_ECDSA | ecdsa-with-SHA1 | |
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA | ecdsa-recommended | |
SB_CERT_ALGORITHM_SHA224_ECDSA | ecdsa-with-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA | ecdsa-with-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA | ecdsa-with-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA | ecdsa-with-SHA512 | |
SB_CERT_ALGORITHM_EC | id-ecPublicKey | |
SB_CERT_ALGORITHM_SPECIFIED_ECDSA | ecdsa-specified | |
SB_CERT_ALGORITHM_GOST_R3410_1994 | id-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3410_2001 | id-GostR3410-2001 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994 | id-GostR3411-94-with-GostR3410-94 | |
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001 | id-GostR3411-94-with-GostR3410-2001 | |
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN | ecdsa-plain-SHA1 | |
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN | ecdsa-plain-SHA224 | |
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN | ecdsa-plain-SHA256 | |
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN | ecdsa-plain-SHA384 | |
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN | ecdsa-plain-SHA512 | |
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN | ecdsa-plain-RIPEMD160 | |
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION | whirlpoolWithRSAEncryption | |
SB_CERT_ALGORITHM_ID_DSA_SHA224 | id-dsa-with-sha224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA256 | id-dsa-with-sha256 | |
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA | id-ecdsa-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA | id-ecdsa-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA | id-ecdsa-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA | id-ecdsa-with-sha3-512 | |
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-224 | |
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-256 | |
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-384 | |
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN | id-ecdsa-plain-with-sha3-512 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_224 | id-dsa-with-sha3-224 | |
SB_CERT_ALGORITHM_ID_DSA_SHA3_256 | id-dsa-with-sha3-256 | |
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION | id-rsassa-pkcs1-v1_5-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA | id-ecdsa-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA | id-ecdsa-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA | id-ecdsa-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA | id-ecdsa-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA | id-ecdsa-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA | id-ecdsa-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA | id-ecdsa-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA | id-ecdsa-with-blake2b512 | |
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s128 | |
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s160 | |
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s224 | |
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2s256 | |
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b160 | |
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b256 | |
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b384 | |
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN | id-ecdsa-plain-with-blake2b512 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224 | id-dsa-with-blake2s224 | |
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256 | id-dsa-with-blake2s256 | |
SB_CERT_ALGORITHM_EDDSA_ED25519 | id-Ed25519 | |
SB_CERT_ALGORITHM_EDDSA_ED448 | id-Ed448 | |
SB_CERT_ALGORITHM_EDDSA_ED25519_PH | id-Ed25519ph | |
SB_CERT_ALGORITHM_EDDSA_ED448_PH | id-Ed448ph | |
SB_CERT_ALGORITHM_EDDSA | id-EdDSA | |
SB_CERT_ALGORITHM_EDDSA_SIGNATURE | id-EdDSA-sig |
Constructors
public ExternalCrypto();
Creates a new ExternalCrypto object with default field values.
OCSPResponse Type
Represents a single OCSP response originating from an OCSP responder.
Remarks
OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).
An OCSP response is a snapshot of the certificate status at a given time.
Fields
Bytes
byte[] (read-only)
Default Value: ""
A buffer containing the raw OCSP response data.
EntryCount
int (read-only)
Default Value: 0
The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.
Issuer
String (read-only)
Default Value: ""
Indicates the issuer of this response (a CA or its authorized representative).
IssuerRDN
String (read-only)
Default Value: ""
Indicates the RDN of the issuer of this response (a CA or its authorized representative).
Location
String (read-only)
Default Value: ""
The location of the OCSP responder.
ProducedAt
String
Default Value: ""
Specifies the time when the response was produced, in UTC.
SigAlgorithm
String
Default Value: "0"
The public key algorithm that was used by the CA to sign this OCSP response.
Source
int (read-only)
Default Value: 0
Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.
Constructors
public OCSPResponse( bytes, startIndex, count);
Initializes the response from a memory buffer. Bytes is a buffer containing raw OCSP response data, StartIndex and Count specify the starting position and the number of bytes to be read from this buffer.
public OCSPResponse( location);
Downloads an OCSP response from a remote location.
public OCSPResponse( stream);
Initializes the response with the data from a stream.
public OCSPResponse();
Creates an empty OCSP response object.
ProxySettings Type
A container for proxy server settings.
Remarks
This type exposes a collection of properties for tuning up the proxy server configuration.
Fields
Address
String
Default Value: ""
The IP address of the proxy server.
Authentication
int
Default Value: 0
The authentication type used by the proxy server.
patNoAuthentication | 0 |
patBasic | 1 |
patDigest | 2 |
patNTLM | 3 |
Password
String
Default Value: ""
The password to authenticate to the proxy server.
Port
int
Default Value: 0
The port on the proxy server to connect to.
ProxyType
int
Default Value: 0
The type of the proxy server.
cptNone | 0 |
cptSocks4 | 1 |
cptSocks5 | 2 |
cptWebTunnel | 3 |
cptHTTP | 4 |
RequestHeaders
String
Default Value: ""
Contains HTTP request headers for WebTunnel and HTTP proxy.
ResponseBody
String
Default Value: ""
Contains the HTTP or HTTPS (WebTunnel) proxy response body.
ResponseHeaders
String
Default Value: ""
Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.
UseIPv6
boolean
Default Value: False
Specifies whether IPv6 should be used when connecting through the proxy.
Username
String
Default Value: ""
Specifies the username credential for proxy authentication.
Constructors
public ProxySettings();
Creates a new ProxySettings object.
SOAPSignature Type
The class is a container for an SOAP message signature.
Remarks
SOAP message may include any number of signatures. class stores on of them.
Fields
CanonicalizationMethod
int
Default Value: 0
The XML canonicalization method that was used for signing.
Supported canonicalization methods:
cxcmNone | 0 | |
cxcmCanon | 1 | |
cxcmCanonComment | 2 | |
cxcmExclCanon | 3 | |
cxcmExclCanonComment | 4 | |
cxcmMinCanon | 5 | |
cxcmCanon_v1_1 | 6 | |
cxcmCanonComment_v1_1 | 7 |
ChainValidationDetails
int (read-only)
Default Value: 0
The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationResult
int (read-only)
Default Value: 0
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
ClaimedSigningTime
String
Default Value: ""
The signing time from the signer's computer.
Use this property to provide the signature production time. The claimed time is not supported by a trusted source; it may be inaccurate, forfeited, or wrong, and as such is usually taken for informational purposes only by verifiers. Use timestamp servers to embed verifiable trusted timestamps. The time is in UTC.
CompatibilityErrors
int (read-only)
Default Value: 0
Returns compatibility errors encountered during validation.
Use this property to get specific compatibility errors encountered during validation. Unlike chain validation details, compatibility errors indicate violations by the signature of the assumed signature level/profile. For example, BES signatures are required to contain the signing time attribute. A prospective BES signature without such attribute will invoke a compatibility error.
ContainsLongTermInfo
boolean (read-only)
Default Value: False
Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
EntityLabel
String (read-only)
Default Value: ""
Use this property to get the signature entity label.
This property returns a string label that uniquely identifies the signature. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.
HashAlgorithm
String
Default Value: "Unknown"
The hash algorithm used for signing.
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 |
IssuerRDN
String (read-only)
Default Value: ""
The Relative Distinguished Name of the signing certificate's issuer.
A collection of information, in the form of [OID, Value] pairs, about the company that issued the signing certificate.
LastArchivalTime
String (read-only)
Default Value: ""
Indicates the most recent archival time of an archived signature
This property returns the time of the most recent archival timestamp applied to the signature. This property only makes sense for 'archived' (e.g. CAdES-A) signatures. Time is in UTC.
Level
int
Default Value: 2
Specifies which level or form of XAdES should be produced.
Use this property to specify the level or form of advanced electronic signature to be produced.
Use the Generic value to produce XML-DSIG signature.
The supported levels and forms are:
aslUnknown | 0 | Unknown signature level |
aslGeneric | 1 | Generic (this value applicable to XAdES signature only and corresponds to XML-DSIG signature) |
aslBaselineB | 2 | Baseline B (B-B, basic) |
aslBaselineT | 3 | Baseline T (B-T, timestamped) |
aslBaselineLT | 4 | Baseline LT (B-LT, long-term) |
aslBaselineLTA | 5 | Baseline LTA (B-LTA, long-term with archived timestamp) |
aslBES | 6 | BES (Basic Electronic Signature) |
aslEPES | 7 | EPES (Electronic Signature with an Explicit Policy) |
aslT | 8 | T (Timestamped) |
aslC | 9 | C (T with revocation references) |
aslX | 10 | X (C with SigAndRefs timestamp or RefsOnly timestamp) (this value applicable to XAdES signature only) |
aslXType1 | 11 | X Type 1 (C with an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXType2 | 12 | X Type 2 (C with a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslXL | 13 | X-L (X with revocation values) (this value applicable to XAdES signature only) |
aslXLType1 | 14 | X-L Type 1 (C with revocation values and an ES-C timestamp) (this value applicable to CAdES signature only) |
aslXLType2 | 15 | X-L Type 2 (C with revocation values and a CertsAndCRLs timestamp) (this value applicable to CAdES signature only) |
aslA | 16 | A (archived) |
aslExtendedBES | 17 | Extended BES |
aslExtendedEPES | 18 | Extended EPES |
aslExtendedT | 19 | Extended T |
aslExtendedC | 20 | Extended C |
aslExtendedX | 21 | Extended X (this value applicable to XAdES signature only) |
aslExtendedXType1 | 22 | Extended X (type 1) (this value applicable to CAdES signature only) |
aslExtendedXType2 | 23 | Extended X (type 2) (this value applicable to CAdES signature only) |
aslExtendedXLong | 24 | Extended X-Long (this value applicable to XAdES signature only) |
aslExtendedXL | 25 | Extended X-L (this value applicable to XAdES signature only) |
aslExtendedXLType1 | 26 | Extended XL (type 1) (this value applicable to CAdES signature only) |
aslExtendedXLType2 | 27 | Extended XL (type 2) (this value applicable to CAdES signature only) |
aslExtendedA | 28 | Extended A |
* For XAdES form from XAdES v1.1.1 use either BES or EPES form values ** Extended forms are supported starting from XAdES v1.3.2
ParentEntity
String
Default Value: ""
Use this property to get the parent signature label.
This property contains the unique entity label of the current signature's parent object - typically a higher-level signature or a timestamp.
PolicyHash
String
Default Value: ""
The signature policy hash value.
Use this property to get the signature policy hash from EPES signatures
PolicyHashAlgorithm
String
Default Value: ""
The algorithm that was used to calculate the signature policy hash
Use this property to get or set the hash algorithm used to calculate the signature policy hash. Read the actual hash value from PolicyHash.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
PolicyID
String
Default Value: ""
The policy ID that was included or to be included into the signature.
Use this property to retrieve the signature policy identifier from EPES signatures.
PolicyURI
String
Default Value: ""
The signature policy URI that was included in the signature.
Use this property to set or retrieve the URI of the signature policy from EPES signatures.
SerialNumber
byte[] (read-only)
Default Value: ""
The serial number of the signing certificate.
SignatureBytes
byte[] (read-only)
Default Value: ""
Returns the binary representation of the SOAP signature.
SignatureType
int
Default Value: 1
The SOAP signature type to use.
Use this property to specify the signature type to use when forming the signature.
Supported values:
sstUnknown | 0 | Unknown signature |
sstWSSSignature | 1 | Uses Web Services Security (WS-Security, WSS) signature. It is implemented according to the OASIS Web Services Security extension to SOAP |
sstSOAPSignature | 2 | Uses SOAP signature. It is implemented according to the SOAP Security Extensions: Digital Signature. |
SignatureValidationResult
int (read-only)
Default Value: 0
The outcome of the cryptographic signature validation.
The following signature validity values are supported:
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
SubjectKeyID
byte[] (read-only)
Default Value: ""
Contains the subject key identifier of the signing certificate.
Subject Key Identifier is a (non-critical) X.509 certificate extension which allows the identification of certificates containing a particular public key. In SecureBlackbox, the unique identifier is represented by a SHA-1 hash of the bit string of the subject public key.
SubjectRDN
String (read-only)
Default Value: ""
Contains information about the person owning the signing certificate. Only certificates with given subject information will be enumerated during the search operation. Information is stored in the form of [Object Identifier, Value] pairs.
Timestamped
boolean (read-only)
Default Value: False
Use this property to establish whether the signature contains an embedded timestamp.
ValidatedSigningTime
String (read-only)
Default Value: ""
Contains the certified signing time.
Use this property to obtain the signing time as certified by a timestamp from a trusted timestamping authority. This property is only non-empty if there was a valid timestamp included in the signature.
ClaimedSigningTime returns a non-trusted signing time from the signer's computer.
Both times are in UTC.
ValidationLog
String (read-only)
Default Value: ""
Contains the complete log of the certificate validation routine.
Use this property to access the chain validation log produced by the class. The log can be very useful when investigating issues with chain validation, as it contains a step-by-step trace of the entire validation procedure.
XAdESVersion
int
Default Value: 3
Specifies XAdES version.
This property specifies the version of the XAdES specification the signature should comply with.
The supported vesions are:
xavUnknown | 0 | Unknown |
xav111 | 1 | XAdES v1.1.1 |
xav122 | 2 | XAdES v1.2.2 |
xav132 | 3 | XAdES v1.3.2 |
xav141 | 4 | XAdES v1.4.1 (aka v1.4.2) |
XMLElement
String
Default Value: ""
Specifies the XML element where to save the signature or containing the signature.
This property specifies the XML element where to save the electronic signature or that contains the signature to be validated.
Supported values are:
"" | an empty string indicates the Document element |
"#id" | indicates an XML element with specified Id |
XPath expression | indicates an XML element selected using XPath expression. Use AddKnownNamespace method to specify Prefixes and NamespaceURIs
For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via AddKnownNamespace method. |
Node name | indicates an XML element selected using its NodeName.
For example: "data" - indicates an XML element with node name "data". |
Constructors
public SOAPSignature();
Creates a new SOAP signature object.
SocketSettings Type
A container for the socket settings.
Remarks
This type is a container for socket-layer parameters.
Fields
DNSMode
int
Default Value: 0
Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.
dmAuto | 0 |
dmPlatform | 1 |
dmOwn | 2 |
dmOwnSecure | 3 |
DNSPort
int
Default Value: 0
Specifies the port number to be used for sending queries to the DNS server.
DNSQueryTimeout
int
Default Value: 0
The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.
DNSServers
String
Default Value: ""
The addresses of DNS servers to use for address resolution, separated by commas or semicolons.
DNSTotalTimeout
int
Default Value: 0
The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.
IncomingSpeedLimit
int
Default Value: 0
The maximum number of bytes to read from the socket, per second.
LocalAddress
String
Default Value: ""
The local network interface to bind the socket to.
LocalPort
int
Default Value: 0
The local port number to bind the socket to.
OutgoingSpeedLimit
int
Default Value: 0
The maximum number of bytes to write to the socket, per second.
Timeout
int
Default Value: 60000
The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).
UseIPv6
boolean
Default Value: False
Enables or disables IP protocol version 6.
Constructors
public SocketSettings();
Creates a new SocketSettings object.
TimestampInfo Type
A container for timestamp information.
Remarks
The TimestampInfo object contains details of a third-party timestamp and the outcome of its validation.
Fields
Accuracy
long (read-only)
Default Value: 0
This field indicates the accuracy of the included time mark, in microseconds.
Bytes
byte[] (read-only)
Default Value: ""
Returns the raw timestamp data in DER format.
CertificateIndex
int (read-only)
Default Value: -1
Returns the index of the TSA certificate in the Certificates collection.
Use this property to look up the TSA certificate in the Certificates collection.
ChainValidationDetails
int (read-only)
Default Value: 0
The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.
Returns a bit mask of the following options:
cvrBadData | 0x0001 | One or more certificates in the validation path are malformed |
cvrRevoked | 0x0002 | One or more certificates are revoked |
cvrNotYetValid | 0x0004 | One or more certificates are not yet valid |
cvrExpired | 0x0008 | One or more certificates are expired |
cvrInvalidSignature | 0x0010 | A certificate contains a non-valid digital signature |
cvrUnknownCA | 0x0020 | A CA certificate for one or more certificates has not been found (chain incomplete) |
cvrCAUnauthorized | 0x0040 | One of the CA certificates are not authorized to act as CA |
cvrCRLNotVerified | 0x0080 | One or more CRLs could not be verified |
cvrOCSPNotVerified | 0x0100 | One or more OCSP responses could not be verified |
cvrIdentityMismatch | 0x0200 | The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate |
cvrNoKeyUsage | 0x0400 | A mandatory key usage is not enabled in one of the chain certificates |
cvrBlocked | 0x0800 | One or more certificates are blocked |
cvrFailure | 0x1000 | General validation failure |
cvrChainLoop | 0x2000 | Chain loop: one of the CA certificates recursively signs itself |
cvrWeakAlgorithm | 0x4000 | A weak algorithm is used in one of certificates or revocation elements |
cvrUserEnforced | 0x8000 | The chain was considered invalid following intervention from a user code |
ChainValidationResult
int (read-only)
Default Value: 0
The outcome of a certificate chain validation routine.
Available options:
cvtValid | 0 | The chain is valid |
cvtValidButUntrusted | 1 | The chain is valid, but the root certificate is not trusted |
cvtInvalid | 2 | The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature) |
cvtCantBeEstablished | 3 | The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses) |
Use the ValidationLog property to access the detailed validation log.
ContainsLongTermInfo
boolean (read-only)
Default Value: False
Returns true if the signature was found to contain long-term validation details (certificates, CRLs, and OCSP response).
EntityLabel
String (read-only)
Default Value: ""
Use this property to get the timestamp entity label.
This property returns a string label that uniquely identifies the timestamp. The label can be used to establish the signature target in the SignatureFound event or to select the signing chain via the SelectInfo method.
HashAlgorithm
String (read-only)
Default Value: ""
Returns the timestamp's hash algorithm.
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_MD2 | MD2 | |
SB_HASH_ALGORITHM_MD4 | MD4 | |
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_CRC32 | CRC32 | |
SB_HASH_ALGORITHM_SSL3 | SSL3 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_POLY1305 | POLY1305 | |
SB_HASH_ALGORITHM_SHA3_224 | SHA3_224 | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 | |
SB_HASH_ALGORITHM_BLAKE2S_128 | BLAKE2S_128 | |
SB_HASH_ALGORITHM_BLAKE2S_160 | BLAKE2S_160 | |
SB_HASH_ALGORITHM_BLAKE2S_224 | BLAKE2S_224 | |
SB_HASH_ALGORITHM_BLAKE2S_256 | BLAKE2S_256 | |
SB_HASH_ALGORITHM_BLAKE2B_160 | BLAKE2B_160 | |
SB_HASH_ALGORITHM_BLAKE2B_256 | BLAKE2B_256 | |
SB_HASH_ALGORITHM_BLAKE2B_384 | BLAKE2B_384 | |
SB_HASH_ALGORITHM_BLAKE2B_512 | BLAKE2B_512 | |
SB_HASH_ALGORITHM_SHAKE_128 | SHAKE_128 | |
SB_HASH_ALGORITHM_SHAKE_256 | SHAKE_256 | |
SB_HASH_ALGORITHM_SHAKE_128_LEN | SHAKE_128_LEN | |
SB_HASH_ALGORITHM_SHAKE_256_LEN | SHAKE_256_LEN |
ParentEntity
String (read-only)
Default Value: ""
Use this property to get the label of the timestamp's parent entity.
This property references the EntityLabel of the object that the timestamp covers, typically a signature.
SerialNumber
byte[] (read-only)
Default Value: ""
Returns the timestamp's serial number.
Time
String (read-only)
Default Value: ""
The time point incorporated into the timestamp.
TimestampType
int (read-only)
Default Value: 0
Returns the type of the timestamp.
Available options:
tstUnknown | 0 | |
tstLegacy | 1 | Supported by: Authenticode components |
tstTrusted | 2 | Supported by: Authenticode components |
tstGeneric | 3 | Supported by: CAdES components |
tstESC | 4 | Supported by: CAdES components |
tstContent | 5 | Supported by: CAdES components |
tstCertsAndCRLs | 6 | Supported by: CAdES components |
tstArchive | 7 | Archive timestamp. Supported by: ASiC, CAdES, JAdES, Office, SOAP, XAdES components |
tstArchive2 | 8 | Archive v2 timestamp. Supported by: ASiC, CAdES components |
tstArchive3 | 9 | Archive v3 timestamp. Supported by: ASiC, CAdES components |
tstIndividualDataObjects | 10 | Individual data objects timetamp. Supported by: ASiC, Office, SOAP, XAdES components |
tstAllDataObjects | 11 | All data objects timestamp. Supported by: ASiC, Office, SOAP, XAdES components |
tstSignature | 12 | Signature timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstRefsOnly | 13 | RefsOnly timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstSigAndRefs | 14 | SigAndRefs timestamp. Supported by: ASiC, JAdES, Office, SOAP, XAdES components |
tstSignedData | 15 | SignedData timestamp. Supported by: JAdES components |
tstArchive141 | 16 | Archive timestamp v1.4.1. Supported by: ASiC, Office, SOAP, XAdES components |
Not all of the above timestamp types can be supported by a specific signature technology used (CAdES, PDF, XAdES).
TSAName
String (read-only)
Default Value: ""
This value uniquely identifies the Timestamp Authority (TSA).
This property provides information about the entity that manages the TSA.
ValidationLog
String (read-only)
Default Value: ""
Contains the TSA certificate chain validation log. This information is extremely useful if the timestamp validation fails.
ValidationResult
int (read-only)
Default Value: 0
Contains the timestamp validation outcome.
Use this property to check the result of the most recent timestamp validation.
svtValid | 0 | The signature is valid |
svtUnknown | 1 | Signature validity is unknown |
svtCorrupted | 2 | The signature is corrupted |
svtSignerNotFound | 3 | Failed to acquire the signing certificate. The signature cannot be validated. |
svtFailure | 4 | General failure |
svtReferenceCorrupted | 5 | Reference corrupted (XML-based signatures only) |
Constructors
public TimestampInfo();
Creates a new TimestampInfo object with default field values.
TLSSettings Type
A container for TLS connection settings.
Remarks
The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.
Fields
AutoValidateCertificates
boolean
Default Value: True
Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.
BaseConfiguration
int
Default Value: 0
Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.
stpcDefault | 0 | |
stpcCompatible | 1 | |
stpcComprehensiveInsecure | 2 | |
stpcHighlySecure | 3 |
Ciphersuites
String
Default Value: ""
A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.
Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by BaseConfiguration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:
- NULL_NULL_NULL
- RSA_NULL_MD5
- RSA_NULL_SHA
- RSA_RC4_MD5
- RSA_RC4_SHA
- RSA_RC2_MD5
- RSA_IDEA_MD5
- RSA_IDEA_SHA
- RSA_DES_MD5
- RSA_DES_SHA
- RSA_3DES_MD5
- RSA_3DES_SHA
- RSA_AES128_SHA
- RSA_AES256_SHA
- DH_DSS_DES_SHA
- DH_DSS_3DES_SHA
- DH_DSS_AES128_SHA
- DH_DSS_AES256_SHA
- DH_RSA_DES_SHA
- DH_RSA_3DES_SHA
- DH_RSA_AES128_SHA
- DH_RSA_AES256_SHA
- DHE_DSS_DES_SHA
- DHE_DSS_3DES_SHA
- DHE_DSS_AES128_SHA
- DHE_DSS_AES256_SHA
- DHE_RSA_DES_SHA
- DHE_RSA_3DES_SHA
- DHE_RSA_AES128_SHA
- DHE_RSA_AES256_SHA
- DH_ANON_RC4_MD5
- DH_ANON_DES_SHA
- DH_ANON_3DES_SHA
- DH_ANON_AES128_SHA
- DH_ANON_AES256_SHA
- RSA_RC2_MD5_EXPORT
- RSA_RC4_MD5_EXPORT
- RSA_DES_SHA_EXPORT
- DH_DSS_DES_SHA_EXPORT
- DH_RSA_DES_SHA_EXPORT
- DHE_DSS_DES_SHA_EXPORT
- DHE_RSA_DES_SHA_EXPORT
- DH_ANON_RC4_MD5_EXPORT
- DH_ANON_DES_SHA_EXPORT
- RSA_CAMELLIA128_SHA
- DH_DSS_CAMELLIA128_SHA
- DH_RSA_CAMELLIA128_SHA
- DHE_DSS_CAMELLIA128_SHA
- DHE_RSA_CAMELLIA128_SHA
- DH_ANON_CAMELLIA128_SHA
- RSA_CAMELLIA256_SHA
- DH_DSS_CAMELLIA256_SHA
- DH_RSA_CAMELLIA256_SHA
- DHE_DSS_CAMELLIA256_SHA
- DHE_RSA_CAMELLIA256_SHA
- DH_ANON_CAMELLIA256_SHA
- PSK_RC4_SHA
- PSK_3DES_SHA
- PSK_AES128_SHA
- PSK_AES256_SHA
- DHE_PSK_RC4_SHA
- DHE_PSK_3DES_SHA
- DHE_PSK_AES128_SHA
- DHE_PSK_AES256_SHA
- RSA_PSK_RC4_SHA
- RSA_PSK_3DES_SHA
- RSA_PSK_AES128_SHA
- RSA_PSK_AES256_SHA
- RSA_SEED_SHA
- DH_DSS_SEED_SHA
- DH_RSA_SEED_SHA
- DHE_DSS_SEED_SHA
- DHE_RSA_SEED_SHA
- DH_ANON_SEED_SHA
- SRP_SHA_3DES_SHA
- SRP_SHA_RSA_3DES_SHA
- SRP_SHA_DSS_3DES_SHA
- SRP_SHA_AES128_SHA
- SRP_SHA_RSA_AES128_SHA
- SRP_SHA_DSS_AES128_SHA
- SRP_SHA_AES256_SHA
- SRP_SHA_RSA_AES256_SHA
- SRP_SHA_DSS_AES256_SHA
- ECDH_ECDSA_NULL_SHA
- ECDH_ECDSA_RC4_SHA
- ECDH_ECDSA_3DES_SHA
- ECDH_ECDSA_AES128_SHA
- ECDH_ECDSA_AES256_SHA
- ECDHE_ECDSA_NULL_SHA
- ECDHE_ECDSA_RC4_SHA
- ECDHE_ECDSA_3DES_SHA
- ECDHE_ECDSA_AES128_SHA
- ECDHE_ECDSA_AES256_SHA
- ECDH_RSA_NULL_SHA
- ECDH_RSA_RC4_SHA
- ECDH_RSA_3DES_SHA
- ECDH_RSA_AES128_SHA
- ECDH_RSA_AES256_SHA
- ECDHE_RSA_NULL_SHA
- ECDHE_RSA_RC4_SHA
- ECDHE_RSA_3DES_SHA
- ECDHE_RSA_AES128_SHA
- ECDHE_RSA_AES256_SHA
- ECDH_ANON_NULL_SHA
- ECDH_ANON_RC4_SHA
- ECDH_ANON_3DES_SHA
- ECDH_ANON_AES128_SHA
- ECDH_ANON_AES256_SHA
- RSA_NULL_SHA256
- RSA_AES128_SHA256
- RSA_AES256_SHA256
- DH_DSS_AES128_SHA256
- DH_RSA_AES128_SHA256
- DHE_DSS_AES128_SHA256
- DHE_RSA_AES128_SHA256
- DH_DSS_AES256_SHA256
- DH_RSA_AES256_SHA256
- DHE_DSS_AES256_SHA256
- DHE_RSA_AES256_SHA256
- DH_ANON_AES128_SHA256
- DH_ANON_AES256_SHA256
- RSA_AES128_GCM_SHA256
- RSA_AES256_GCM_SHA384
- DHE_RSA_AES128_GCM_SHA256
- DHE_RSA_AES256_GCM_SHA384
- DH_RSA_AES128_GCM_SHA256
- DH_RSA_AES256_GCM_SHA384
- DHE_DSS_AES128_GCM_SHA256
- DHE_DSS_AES256_GCM_SHA384
- DH_DSS_AES128_GCM_SHA256
- DH_DSS_AES256_GCM_SHA384
- DH_ANON_AES128_GCM_SHA256
- DH_ANON_AES256_GCM_SHA384
- ECDHE_ECDSA_AES128_SHA256
- ECDHE_ECDSA_AES256_SHA384
- ECDH_ECDSA_AES128_SHA256
- ECDH_ECDSA_AES256_SHA384
- ECDHE_RSA_AES128_SHA256
- ECDHE_RSA_AES256_SHA384
- ECDH_RSA_AES128_SHA256
- ECDH_RSA_AES256_SHA384
- ECDHE_ECDSA_AES128_GCM_SHA256
- ECDHE_ECDSA_AES256_GCM_SHA384
- ECDH_ECDSA_AES128_GCM_SHA256
- ECDH_ECDSA_AES256_GCM_SHA384
- ECDHE_RSA_AES128_GCM_SHA256
- ECDHE_RSA_AES256_GCM_SHA384
- ECDH_RSA_AES128_GCM_SHA256
- ECDH_RSA_AES256_GCM_SHA384
- PSK_AES128_GCM_SHA256
- PSK_AES256_GCM_SHA384
- DHE_PSK_AES128_GCM_SHA256
- DHE_PSK_AES256_GCM_SHA384
- RSA_PSK_AES128_GCM_SHA256
- RSA_PSK_AES256_GCM_SHA384
- PSK_AES128_SHA256
- PSK_AES256_SHA384
- PSK_NULL_SHA256
- PSK_NULL_SHA384
- DHE_PSK_AES128_SHA256
- DHE_PSK_AES256_SHA384
- DHE_PSK_NULL_SHA256
- DHE_PSK_NULL_SHA384
- RSA_PSK_AES128_SHA256
- RSA_PSK_AES256_SHA384
- RSA_PSK_NULL_SHA256
- RSA_PSK_NULL_SHA384
- RSA_CAMELLIA128_SHA256
- DH_DSS_CAMELLIA128_SHA256
- DH_RSA_CAMELLIA128_SHA256
- DHE_DSS_CAMELLIA128_SHA256
- DHE_RSA_CAMELLIA128_SHA256
- DH_ANON_CAMELLIA128_SHA256
- RSA_CAMELLIA256_SHA256
- DH_DSS_CAMELLIA256_SHA256
- DH_RSA_CAMELLIA256_SHA256
- DHE_DSS_CAMELLIA256_SHA256
- DHE_RSA_CAMELLIA256_SHA256
- DH_ANON_CAMELLIA256_SHA256
- ECDHE_ECDSA_CAMELLIA128_SHA256
- ECDHE_ECDSA_CAMELLIA256_SHA384
- ECDH_ECDSA_CAMELLIA128_SHA256
- ECDH_ECDSA_CAMELLIA256_SHA384
- ECDHE_RSA_CAMELLIA128_SHA256
- ECDHE_RSA_CAMELLIA256_SHA384
- ECDH_RSA_CAMELLIA128_SHA256
- ECDH_RSA_CAMELLIA256_SHA384
- RSA_CAMELLIA128_GCM_SHA256
- RSA_CAMELLIA256_GCM_SHA384
- DHE_RSA_CAMELLIA128_GCM_SHA256
- DHE_RSA_CAMELLIA256_GCM_SHA384
- DH_RSA_CAMELLIA128_GCM_SHA256
- DH_RSA_CAMELLIA256_GCM_SHA384
- DHE_DSS_CAMELLIA128_GCM_SHA256
- DHE_DSS_CAMELLIA256_GCM_SHA384
- DH_DSS_CAMELLIA128_GCM_SHA256
- DH_DSS_CAMELLIA256_GCM_SHA384
- DH_anon_CAMELLIA128_GCM_SHA256
- DH_anon_CAMELLIA256_GCM_SHA384
- ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
- ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
- ECDH_ECDSA_CAMELLIA128_GCM_SHA256
- ECDH_ECDSA_CAMELLIA256_GCM_SHA384
- ECDHE_RSA_CAMELLIA128_GCM_SHA256
- ECDHE_RSA_CAMELLIA256_GCM_SHA384
- ECDH_RSA_CAMELLIA128_GCM_SHA256
- ECDH_RSA_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_GCM_SHA256
- PSK_CAMELLIA256_GCM_SHA384
- DHE_PSK_CAMELLIA128_GCM_SHA256
- DHE_PSK_CAMELLIA256_GCM_SHA384
- RSA_PSK_CAMELLIA128_GCM_SHA256
- RSA_PSK_CAMELLIA256_GCM_SHA384
- PSK_CAMELLIA128_SHA256
- PSK_CAMELLIA256_SHA384
- DHE_PSK_CAMELLIA128_SHA256
- DHE_PSK_CAMELLIA256_SHA384
- RSA_PSK_CAMELLIA128_SHA256
- RSA_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_CAMELLIA128_SHA256
- ECDHE_PSK_CAMELLIA256_SHA384
- ECDHE_PSK_RC4_SHA
- ECDHE_PSK_3DES_SHA
- ECDHE_PSK_AES128_SHA
- ECDHE_PSK_AES256_SHA
- ECDHE_PSK_AES128_SHA256
- ECDHE_PSK_AES256_SHA384
- ECDHE_PSK_NULL_SHA
- ECDHE_PSK_NULL_SHA256
- ECDHE_PSK_NULL_SHA384
- ECDHE_RSA_CHACHA20_POLY1305_SHA256
- ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
- DHE_RSA_CHACHA20_POLY1305_SHA256
- PSK_CHACHA20_POLY1305_SHA256
- ECDHE_PSK_CHACHA20_POLY1305_SHA256
- DHE_PSK_CHACHA20_POLY1305_SHA256
- RSA_PSK_CHACHA20_POLY1305_SHA256
- AES128_GCM_SHA256
- AES256_GCM_SHA384
- CHACHA20_POLY1305_SHA256
- AES128_CCM_SHA256
- AES128_CCM8_SHA256
ClientAuth
int
Default Value: 0
Enables or disables certificate-based client authentication.
Set this property to true to tune up the client authentication type:
ccatNoAuth | 0 | |
ccatRequestCert | 1 | |
ccatRequireCert | 2 |
ECCurves
String
Default Value: ""
Defines the elliptic curves to enable.
Extensions
String
Default Value: ""
Provides access to TLS extensions.
ForceResumeIfDestinationChanges
boolean
Default Value: False
Whether to force TLS session resumption when the destination address changes.
PreSharedIdentity
String
Default Value: ""
Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
PreSharedKey
String
Default Value: ""
Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
PreSharedKeyCiphersuite
String
Default Value: ""
Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
RenegotiationAttackPreventionMode
int
Default Value: 2
Selects the renegotiation attack prevention mechanism.
The following options are available:
crapmCompatible | 0 | TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled). |
crapmStrict | 1 | Renegotiation attack prevention is enabled and enforced. |
crapmAuto | 2 | Automatically choose whether to enable or disable renegotiation attack prevention. |
RevocationCheck
int
Default Value: 1
Specifies the kind(s) of revocation check to perform.
Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.
crcNone | 0 | No revocation checking. |
crcAuto | 1 | Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future. |
crcAllCRL | 2 | All provided CRL endpoints will be checked, and all checks must succeed. |
crcAllOCSP | 3 | All provided OCSP endpoints will be checked, and all checks must succeed. |
crcAllCRLAndOCSP | 4 | All provided CRL and OCSP endpoints will be checked, and all checks must succeed. |
crcAnyCRL | 5 | All provided CRL endpoints will be checked, and at least one check must succeed. |
crcAnyOCSP | 6 | All provided OCSP endpoints will be checked, and at least one check must succeed. |
crcAnyCRLOrOCSP | 7 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first. |
crcAnyOCSPOrCRL | 8 | All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first. |
This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.
There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).
This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.
Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.
Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.
SSLOptions
int
Default Value: 16
Various SSL (TLS) protocol options, set of
cssloExpectShutdownMessage | 0x001 | Wait for the close-notify message when shutting down the connection |
cssloOpenSSLDTLSWorkaround | 0x002 | (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions |
cssloDisableKexLengthAlignment | 0x004 | Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it. |
cssloForceUseOfClientCertHashAlg | 0x008 | Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it. |
cssloAutoAddServerNameExtension | 0x010 | Automatically add the server name extension when known |
cssloAcceptTrustedSRPPrimesOnly | 0x020 | Accept trusted SRP primes only |
cssloDisableSignatureAlgorithmsExtension | 0x040 | Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it. |
cssloIntolerateHigherProtocolVersions | 0x080 | (server option) Do not allow fallback from TLS versions higher than currently enabled |
cssloStickToPrefCertHashAlg | 0x100 | Stick to preferred certificate hash algorithms |
cssloNoImplicitTLS12Fallback | 0x200 | Disable implicit TLS 1.3 to 1.2 fallbacks |
cssloUseHandshakeBatches | 0x400 | Send the handshake message as large batches rather than individually |
TLSMode
int
Default Value: 0
Specifies the TLS mode to use.
smDefault | 0 | |
smNoTLS | 1 | Do not use TLS |
smExplicitTLS | 2 | Connect to the server without any encryption and then request an SSL session. |
smImplicitTLS | 3 | Connect to the specified port, and establish the SSL session at once. |
smMixedTLS | 4 | Connect to the specified port, and establish the SSL session at once, but allow plain data. |
UseExtendedMasterSecret
boolean
Default Value: False
Enables the Extended Master Secret Extension, as defined in RFC 7627.
UseSessionResumption
boolean
Default Value: False
Enables or disables the TLS session resumption capability.
Versions
int
Default Value: 16
The SSL/TLS versions to enable by default.
csbSSL2 | 0x01 | SSL 2 |
csbSSL3 | 0x02 | SSL 3 |
csbTLS1 | 0x04 | TLS 1.0 |
csbTLS11 | 0x08 | TLS 1.1 |
csbTLS12 | 0x10 | TLS 1.2 |
csbTLS13 | 0x20 | TLS 1.3 |
Constructors
public TLSSettings();
Creates a new TLSSettings object.
XMLReference Type
Represents an XML reference element.
Remarks
XMLReference specifies the digest algorithm and digest value, and, optionally: an identifier of the object being signed, the type of the object, and/or a list of transforms to be applied prior to digesting.
Fields
AutoGenerateElementId
boolean
Default Value: False
Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.
CanonicalizationMethod
int
Default Value: 0
Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.
cxcmNone | 0 | |
cxcmCanon | 1 | |
cxcmCanonComment | 2 | |
cxcmExclCanon | 3 | |
cxcmExclCanonComment | 4 | |
cxcmMinCanon | 5 | |
cxcmCanon_v1_1 | 6 | |
cxcmCanonComment_v1_1 | 7 |
CustomElementId
String
Default Value: ""
Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.
DataObjectDescription
String
Default Value: ""
This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.
DataObjectEncoding
String
Default Value: ""
This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.
DataObjectIdentifier
String
Default Value: ""
This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.
DataObjectMimeType
String
Default Value: ""
This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.
DigestValue
byte[]
Default Value: ""
Use this property to get or set the value of the digest calculated over the referenced data.
This field is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.
HasDataObjectFormat
boolean
Default Value: False
Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.
Check this property to find out if the reference has an associated DataObjectFormat element.
HashAlgorithm
String
Default Value: "SHA256"
Specifies the hash algorithm to be used.
Supported values:
SB_HASH_ALGORITHM_MD5 | MD5 | |
SB_HASH_ALGORITHM_SHA1 | SHA1 | |
SB_HASH_ALGORITHM_SHA224 | SHA224 | |
SB_HASH_ALGORITHM_SHA256 | SHA256 | |
SB_HASH_ALGORITHM_SHA384 | SHA384 | |
SB_HASH_ALGORITHM_SHA512 | SHA512 | |
SB_HASH_ALGORITHM_RIPEMD160 | RIPEMD160 | |
SB_HASH_ALGORITHM_GOST_R3411_1994 | GOST1994 | |
SB_HASH_ALGORITHM_WHIRLPOOL | WHIRLPOOL | |
SB_HASH_ALGORITHM_SHA3_256 | SHA3_256 | |
SB_HASH_ALGORITHM_SHA3_384 | SHA3_384 | |
SB_HASH_ALGORITHM_SHA3_512 | SHA3_512 |
HasURI
boolean
Default Value: True
Specifies whether the URI is set (even when it is empty).
ID
String
Default Value: ""
A user-defined identifier (ID) attribute of this Reference element.
InclusiveNamespacesPrefixList
String
Default Value: ""
Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.
ReferenceType
String
Default Value: ""
The Reference's type attribute as defined in XMLDSIG specification.
TargetData
byte[]
Default Value: ""
Contains the referenced external data when the digest value is not explicitly specified.
This field is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.
TargetType
int
Default Value: 0
The reference's target type to use.
Use this property to specify the reference's target type to use when forming the signature.
TargetXMLElement
String
Default Value: ""
This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.
Supported values are:
"" | an empty string indicates the Document element. |
"#id" | indicates an XML element with specified Id. |
XPointer expression | indicates an XML element selected using XPointer expression. Use the AddKnownNamespace method to specify Prefixes and NamespaceURIs
For example: "/root/data[1]" - indicates the second "data" element under the document element with a name "root" "//ns1:data" - indicates a data element. "ns1" prefix should be defined via AddKnownNamespace method. |
Node name | indicates an XML element selected using its NodeName.
For example: "data" - indicates an XML element with node name "data". |
URI
String
Default Value: ""
Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.
UseBase64Transform
boolean
Default Value: False
Specifies whether Base64 transform is included in transform chain.
UseEnvelopedSignatureTransform
boolean
Default Value: False
Specifies whether enveloped signature transform is included in transform chain.
UseXPathFilter2Transform
boolean
Default Value: False
Specifies whether XPath Filter 2.0 transform is included in transform chain.
UseXPathTransform
boolean
Default Value: False
Specifies whether XPath transform is included in transform chain.
ValidationResult
boolean (read-only)
Default Value: False
The outcome of the cryptographic reference validation.
XPathExpression
String
Default Value: ""
Use this property to specify XPath expression for XPath transform of the reference.
XPathFilter2Expressions
String
Default Value: ""
Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.
XPathFilter2Filters
String
Default Value: ""
Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.
Supported values:
"intersect" | Intersect filter computes the intersection of the selected subtrees with the filter node-set. |
"subtract" | Subtract filter computes the subtraction of the selected subtrees with the filter node-set. |
"union" | Union filter computes the union of the selected subtrees with the filter node-set. |
XPathFilter2PrefixList
String
Default Value: ""
Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.
XPathPrefixList
String
Default Value: ""
Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.
Constructors
public XMLReference();
Creates a new XML reference element.
public XMLReference( ID);
Creates a new XML reference element from its ID .
public XMLReference( ID, URI);
Creates a new XML reference element from its ID and URI reference to the external data.
Config Settings (SOAPSigner Class)
The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.SOAPSigner Config Settings
The supported values are: "X509v3", "X509PKIPathv1", "PKCS7", "Default" or fully qualified URLs for the first three values.
For default value, the component uses the "X509v3" type if one signing certificate is provided, and uses the "PKCS7" type otherwise.