JAdESSigner Module

Properties   Methods   Events   Config Settings   Errors  

The JAdESSigner module signs Javascript content electronically.

Syntax

SecureBlackbox.JAdESSigner

Remarks

JAdESSigner supports a range of digital signature formats over Javascript content, including JSON Web Signatures (JWS) and ETSI JSON Advanced Electronic Signatures (JAdES). JAdESSigner signer = new JAdESSigner(); signer.getNewSignature().setHashAlgorithm("SHA512"); // Default hashing algorithm SHA256 // Select the file which will be signed signer.setDataFile("MyExe.exe"); // Select the path where the signed file will be saved signer.setOutputFile("SignedFile.scs"); // Specify the certificate that shall be used for signing signer.setSigningCertificate(new Certificate("cert.pfx","password")); signer.getNewSignature().setLevel(JAdESSignature.jaslBaselineT); // Set the level of the signature // Provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature signer.setTimestampServer("http://freetsa.org/tsr"); signer.sign(); // Sign

Standards and technologies supported

JAdESSigner can create signatures that match the following standards:

• Generic JSON Web Signatures (JWS) (RFC7515)
• JAdES: all profiles are supported (BES, EPES, T, LTV, B-B, B-T, and others) (ETSI TS 119 182-1)
• Timestamps using external TSAs.
• All industry-standard cryptographic algorithms (RSA, ECDSA, SHA256-512, and many others).

Configuring the signature spec

JWS and JAdES signatures can come in all sorts of flavours, with the primary factors being the signature format (how exactly the signed data is represented in bytes) and completeness (the extent of the trust information that is included in the signature). You can use the properties of your JAdESSigner object to configure these and other parameters. Typically, the service or software that you need to communicate with will provide you with a list of requirements that your JSON signature needs to satisfy. In some cases, they will also send you an example signature that you may use as a guide.

Typically, you will need to adjust the following categories of settings:

• Level (plain JWS, B, T, LT, or LTA). This can be adjusted with the property.
• Timestamp requirement: provide the address of your online TSA service via TimestampServer property.
• When creating LT/LTA signatures, tune up validation parameters via RevocationCheck, OfflineMode, and IgnoreChainValidationErrors properties.
• Configure the signature representation parameters such as CompactForm, Detached or FlattenedSignature.

The above are the most important settings from each category; you may need to adjust more specific settings, such as EPES policy parameters (such as ) or ContentType, to fine-tune your signature.

Signing certificates

JAdESSigner can use certificates residing on different media. Besides generic certificates stored in PFX or PEM files (A1), it can operate with non-exportable certificates residing on hardware media (A3), system stores/keychains, or in the cloud.

Non-exportable certificates can be accessed transparently via a Windows CSP or a PKCS#11 driver, if supplied by the certificate issuer. Proprietary or less interoperable media can be communicated with the external signing feature (see below).

Use CertificateManager and CertificateStorage components to load the signing certificate. Assign the certificate to SigningCertificate property, and optionally provide the remainder of its chain via the SigningChain property.

In the default configuration, JAdESSigner will do its best to collect the trust elements (certificates, CRLs, OCSP responses) required by the chosen signature level automatically. It will use all available sources, including the system stores, the chain validation cache, and the signature itself (when upgrading an existing signature). However, there can be situations where only some (or even none) of the trust elements are available in the public locations. This is particularly the case for internal, experimental, or test PKI environments. In such cases you might need to locate the missing elements manually and provide them to JAdESSigner via the KnownCertificates, KnownCRLs, and KnownOCSPs properties. You can also provide any trust anchors not included in the public Trusted Root directory via the TrustedCertificates collection.

Note: If signing with a non-exportable key (such as residing on a hardware device or in the cloud), please make sure you keep the original CertificateStorage object open until the signing is completed. This is because the storage component provides a 'bridge' to the private key. If the storage is closed prematurely, this bridge is destroyed, and the private key can't be used.

Signing the JSON

Now that you have configured the signature and certificate settings, you can proceed to signing. You can provide the JSON input in one of the following forms: as a file (assign the path to InputFile property), as a stream (assign to InputStream property), as a string (InputString), or as a byte array (assign to InputBytes). Similarly, the output can be collected in one of the same forms, either by passing the destination path or stream via OutputFile and OutputStream respectively, or by reading the resulting document bytes from the OutputBytes or OutputString property after the signing.

Having set up the input and output, call the component's Sign method. This will initiate the signing process. Depending on the settings, the signing may be as straightforward as calculating the document hash and signing it with the private key (e.g. when creating a B-level signature), or it may involve advanced chain validation routines (LT or LTA). During the latter the component contacts a number of external trust information sources (CA, CRL, and OCSP servers) to establish the validity of the signing certificate.

If a TSA server was provided via the TimestampServer property, the component will contact it too to timestamp the new signature.

During the signing JAdESSigner may fire events to let your code know of certain conditions. It may fire TLSCertValidate if one of the HTTP endpoints involved during the operation (which may be a CRL, OCSP, or TSA service) works over TLS and needs its certificate chain to be validated.

External signing and DCAuth

JAdESSigner, like many other components included in the product, supports two methods of signing with external keys. These methods are fully independent of each other: you can choose the one that suits your scenario best.

Synchronous method: ExternalSign

This is a simpler method that basically lets you infiltrate into the signing routine by taking care of the hash signing operation. The component does the rest of the job (hash calculation, preparation of signature objects, CRL/OCSP retrieval).

To initiate this method, call SignExternal instead of Sign. When the hash is ready, it will be passed back to your code with ExternalSign event. Your event handler needs to sign the hash with the private key and return the created signature back to the component - which will embed it into the document.

You don't need your signing certificate to contain an associated private key when using this method. The certificate itself (its public copy) may be needed though, as it is included in the hash calculation.

This method is synchronous, meaning SignExternal provides you the results immediately upon its completion.

Asynchronous method: DCAuth

DCAuth is a SecureBlackbox know-how technology. This protocol was designed to allow sharing of private keys across environments, allowing the signer and the private key to reside on different systems. It works in the following way:

• The signing party - such as JAdESSigner - initiates the operation using SignAsyncBegin call. This produces two outcomes: a pre-signed content (a JSON body with a blank signature placeholder), and a request state (an object containing a hash that needs to be signed). At this point the JAdESSigner instance can be released, and the process itself terminated (which may be useful when run as part of a web page).
• The request state is passed to the private key holder party. The private key holder passes the request state to a DCAuth object, which parses the request state, extracts the hash, and signs it. The output of DCAuth processing is another object, response state, which contains the signature. The private key holder then sends the response state back to the signing party.
• The signing party re-creates the signing controls, and passes the response state, together with the pre-signed content, to the signer's SignAsyncEnd method. SignAsyncEnd extracts the signature from the response state and incorporates it into the pre-signed object, hereby completing the signature.

This method is asynchronous in that sense that, from the signing party's viewpoint, it splits the signing operation into the pre-signing and completion stages which can be performed independently from each other and in different execution contexts. This makes this method particularly helpful for use in web pages and other scenarios where the signing key is not available in real time.

Fine-grained chain validation setup

Chain validation is a sophisticated, multi-faceted procedure that involves a lot of variables. Depending on the configuration of your operating environment, the specifics of the PKI framework being used, and the validation policy you need to follow, you may want to tune up your chain validation parameters so they fit them best. A summary of such parameters is given below.

• RevocationCheck lets you choose between and/or prioritize revocation origins. OCSP sources are often preferred to CRL because of their real-time capability and the smaller size of validation tokens they produce.
• OfflineMode is a master switch that stops the class from looking for any validation tokens online. If this property is switched on, the class will only use the KnownCertificates, TrustedCertificates, KnownCRLs, and KnownOCSPs collections to look for the missing validation material.
• IgnoreChainValidationErrors makes the class ignore any major validation issues it encounters (such us an untrusted chain or missing CRL). This option is handy for debugging and for creating signatures in the environments where the signing certificate is not trusted.
• KnownCertificates, KnownCRLs, and KnownOCSPs let you provide your own validation material. This may be useful when working in OfflineMode, where the signer has no access to the validation sources, or where the validation material has already been collected.
• TrustedCertificates lets you provide a list of trust anchors, either as a complement to the system's or as an alternative to it.
• BlockedCertificates lets you provide a list of blocked/distrusted certificates. Any CA certificate contained in it will be deemed untrusted/invalid.

The following parameters are not directly related to chain validation, but may have an implicit effect on it.

• Proxy, SocketSettings, and TLSSettings let you tune up the connectivity and TLS options in accordance with local preferences.
• TLSClientChain lets you provide the client certificate and its chain for TLS client authentication.
• Subscribe to TLSCertValidate to validate any TLS certificates of the services involved in chain validation.

The results of the chain validation procedure, upon its completion, are published in the following properties:

• ChainValidationResult contains the primary result of the chain validation routine: valid, valid but untrusted, invalid, or undefined.
• ChainValidationDetails provides the details of the factors that contributed to the chain validation result, such as an outdated certificate, a missing CRL, or a missing CA certificate.
• ValidationLog contains the detailed chain validation log. The log can often be very helpful in nailing down various validation issues.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.

AutoValidateSignatures Property (JAdESSigner Module)

Specifies whether module should validate any present signatures when the JSON opened.

Syntax

• Swift
• Objective-C

public var autoValidateSignatures: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=autoValidateSignatures,setter=setAutoValidateSignatures:) BOOL autoValidateSignatures;

- (BOOL)autoValidateSignatures;
- (void)setAutoValidateSignatures :(BOOL)newAutoValidateSignatures;

Default Value

False

Remarks

This setting is switched off by default to speed up JSON processing. Even if the JWS/JAdES signature is loaded with this property set to false, you can validate the signatures manually on a later stage using the Revalidate method.

BlockedCertificates Property (JAdESSigner Module)

The certificates that must be rejected as trust anchors.

Syntax

• Swift
• Objective-C

public var blockedCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=blockedCertCount,setter=setBlockedCertCount:) int blockedCertCount;

- (int)blockedCertCount;
- (void)setBlockedCertCount :(int)newBlockedCertCount;

- (NSData*)blockedCertBytes:(int)blockedCertIndex;

- (long long)blockedCertHandle:(int)blockedCertIndex;
- (void)setBlockedCertHandle:(int)blockedCertIndex :(long long)newBlockedCertHandle;

Default Value

""

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

Certificates Property (JAdESSigner Module)

A collection of certificates included in the electronic signature.

Syntax

• Swift
• Objective-C

public var certificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=certCount) int certCount;

- (int)certCount;

- (NSData*)certBytes:(int)certIndex;

- (BOOL)certCA:(int)certIndex;

- (NSData*)certCAKeyID:(int)certIndex;

- (int)certCertType:(int)certIndex;

- (NSString*)certCRLDistributionPoints:(int)certIndex;

- (NSString*)certCurve:(int)certIndex;

- (NSString*)certFingerprint:(int)certIndex;

- (NSString*)certFriendlyName:(int)certIndex;

- (long long)certHandle:(int)certIndex;

- (NSString*)certHashAlgorithm:(int)certIndex;

- (NSString*)certIssuer:(int)certIndex;

- (NSString*)certIssuerRDN:(int)certIndex;

- (NSString*)certKeyAlgorithm:(int)certIndex;

- (int)certKeyBits:(int)certIndex;

- (NSString*)certKeyFingerprint:(int)certIndex;

- (int)certKeyUsage:(int)certIndex;

- (BOOL)certKeyValid:(int)certIndex;

- (NSString*)certOCSPLocations:(int)certIndex;

- (BOOL)certOCSPNoCheck:(int)certIndex;

- (int)certOrigin:(int)certIndex;

- (NSString*)certPolicyIDs:(int)certIndex;

- (NSData*)certPrivateKeyBytes:(int)certIndex;

- (BOOL)certPrivateKeyExists:(int)certIndex;

- (BOOL)certPrivateKeyExtractable:(int)certIndex;

- (NSData*)certPublicKeyBytes:(int)certIndex;

- (BOOL)certQualified:(int)certIndex;

- (int)certQualifiedStatements:(int)certIndex;

- (NSString*)certQualifiers:(int)certIndex;

- (BOOL)certSelfSigned:(int)certIndex;

- (NSData*)certSerialNumber:(int)certIndex;

- (NSString*)certSigAlgorithm:(int)certIndex;

- (int)certSource:(int)certIndex;

- (NSString*)certSubject:(int)certIndex;

- (NSString*)certSubjectAlternativeName:(int)certIndex;

- (NSData*)certSubjectKeyID:(int)certIndex;

- (NSString*)certSubjectRDN:(int)certIndex;

- (BOOL)certValid:(int)certIndex;

- (NSString*)certValidFrom:(int)certIndex;

- (NSString*)certValidTo:(int)certIndex;

Default Value

""

Remarks

This property includes a collection of certificates of the currently selected info.

CheckTrustedLists Property (JAdESSigner Module)

Specifies whether the module should attempt to validate chain trust via a known Trusted List.

Syntax

• Swift
• Objective-C

public var checkTrustedLists: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=checkTrustedLists,setter=setCheckTrustedLists:) BOOL checkTrustedLists;

- (BOOL)checkTrustedLists;
- (void)setCheckTrustedLists :(BOOL)newCheckTrustedLists;

Default Value

False

Remarks

Set this property to true to enable the component to validate chain trust against an internal list of known Trusted Lists (such as EUTL).

CompactForm Property (JAdESSigner Module)

Specifies if the JWS compact serialization to be used.

Syntax

• Swift
• Objective-C

public var compactForm: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=compactForm,setter=setCompactForm:) BOOL compactForm;

- (BOOL)compactForm;
- (void)setCompactForm :(BOOL)newCompactForm;

Default Value

False

Remarks

When this property is set to "true" value, the JAdES component will use the JWS compact serialization format when saving a signature.

The JWS compact serialization format is a compact, Url safe representation of a JWS (JSON Web Signature) or JWE (JSON Web Encryption) object, used for transmitting security tokens.

The JWS compact serialization format supports only one signature without unprotected header (only JWS or JAdES BaselineB signature).

ContentType Property (JAdESSigner Module)

Specifies payload content type.

Syntax

• Swift
• Objective-C

public var contentType: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=contentType,setter=setContentType:) NSString* contentType;

- (NSString*)contentType;
- (void)setContentType :(NSString*)newContentType;

Default Value

""

Remarks

Use this property to indicate the content type of the JWS Payload.

This property provides a way for the application to disambiguate among different kinds of objects that might be present in the payload, but it is typically not used when the kind of object is already known. The value of this property is a string that conforms to the Internet Media Type (MIME) format, such as "text/plain" or "application/json".

It is optional to use this property and it is recommended to omit the "application/" prefix of the media type value when it is not needed. The recipient of the signed message should treat the value as if "application/" were prepended to it, unless it already contains a '/'.

CRLs Property (JAdESSigner Module)

A collection of certificate revocation lists embedded into the signature by the signer.

Syntax

• Swift
• Objective-C

public var crLs: Array<CRL> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=CRLCount) int CRLCount;

- (int)CRLCount;

- (NSData*)CRLBytes:(int)cRLIndex;

- (NSData*)CRLCAKeyID:(int)cRLIndex;

- (int)CRLEntryCount:(int)cRLIndex;

- (long long)CRLHandle:(int)cRLIndex;

- (NSString*)CRLIssuer:(int)cRLIndex;

- (NSString*)CRLIssuerRDN:(int)cRLIndex;

- (NSString*)CRLLocation:(int)cRLIndex;

- (NSString*)CRLNextUpdate:(int)cRLIndex;

- (NSString*)CRLSigAlgorithm:(int)cRLIndex;

- (int)CRLSource:(int)cRLIndex;

- (NSData*)CRLTBS:(int)cRLIndex;

- (NSString*)CRLThisUpdate:(int)cRLIndex;

Default Value

""

Remarks

Use this property to access the CRLs embedded into the signature by the signer.

DataBytes Property (JAdESSigner Module)

Use this property to pass a payload or an object data to module in the byte array form.

Syntax

• Swift
• Objective-C

public var dataBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataBytes,setter=setDataBytes:) NSData* dataBytes;

- (NSData*)dataBytes;
- (void)setDataBytes :(NSData*)newDataBytes;

Remarks

Assign a byte array containing a JWS payload or an object data to be processed to this property.

DataFile Property (JAdESSigner Module)

A path to a file containing a payload or an object data.

Syntax

• Swift
• Objective-C

public var dataFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataFile,setter=setDataFile:) NSString* dataFile;

- (NSString*)dataFile;
- (void)setDataFile :(NSString*)newDataFile;

Default Value

""

Remarks

Use this property to provide a JWS payload or an object data to be processed.

DataString Property (JAdESSigner Module)

Use this property to pass a payload or an object data to module in the string form.

Syntax

• Swift
• Objective-C

public var dataString: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=dataString,setter=setDataString:) NSString* dataString;

- (NSString*)dataString;
- (void)setDataString :(NSString*)newDataString;

Default Value

""

Remarks

Assign a string containing a JWS payload or an object data to be processed to this property.

Detached Property (JAdESSigner Module)

Specifies whether a detached signature should be produced or verified.

Syntax

• Swift
• Objective-C

public var detached: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=detached,setter=setDetached:) BOOL detached;

- (BOOL)detached;
- (void)setDetached :(BOOL)newDetached;

Default Value

False

Remarks

Use this property to specify whether a detached signature should be produced or verified.

When this property is set to "true" value, the JWS payload will be detached from the signature and may either be a single detached object or the result of concatenating multiple detached data objects. In other words, the JWS payload and the signature are stored in separate objects.

If this property is set to "true" value, the user must provide the detached content via the DataFile or DataStream or DataBytes or DataString properties.

When Detached is set to "false" value, the JWS payload is included with the signature as a single object.

ExternalCrypto Property (JAdESSigner Module)

Provides access to external signing and DC parameters.

Syntax

• Swift
• Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

 

Default Value

""

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

ExtractPayload Property (JAdESSigner Module)

Specifies whether a payload should be extracted.

Syntax

• Swift
• Objective-C

public var extractPayload: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=extractPayload,setter=setExtractPayload:) BOOL extractPayload;

- (BOOL)extractPayload;
- (void)setExtractPayload :(BOOL)newExtractPayload;

Default Value

False

Remarks

Use this property to specify whether a payload should be extracted when signature loaded. This applies only to non-detached signatures with a payload.

When this property is set to "true" value, the JWS payload will be extracted from the signature.

The user must provide the OutputFile or OutputStream properties with a filename or stream where to save the payload, if none is provided then payload is returned via OutputBytes or OutputString properties.

FIPSMode Property (JAdESSigner Module)

Reserved.

Syntax

• Swift
• Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

FlattenedSignature Property (JAdESSigner Module)

Specifies if the flattened signature to be used.

Syntax

• Swift
• Objective-C

public var flattenedSignature: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=flattenedSignature,setter=setFlattenedSignature:) BOOL flattenedSignature;

- (BOOL)flattenedSignature;
- (void)setFlattenedSignature :(BOOL)newFlattenedSignature;

Default Value

True

Remarks

This property determines whether to use the flattened JWS JSON serialization format. This format is optimized for the single digital signature case and flattens the general JWS JSON serialization syntax by removing the "signatures" member and instead placing the "protected", "header", and "signature" members at the top-level JSON object (at the same level as the "payload" member).

When the FlattenedSignature property is set to "true" value, the signature will be represented using the flattened JWS JSON serialization format, but it is only applicable when there is a single signature involved.

When the property is set to "false" value, the signature will be represented using the general JWS JSON serialization format.

IgnoreChainValidationErrors Property (JAdESSigner Module)

Makes the module tolerant to chain validation errors.

Syntax

• Swift
• Objective-C

public var ignoreChainValidationErrors: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=ignoreChainValidationErrors,setter=setIgnoreChainValidationErrors:) BOOL ignoreChainValidationErrors;

- (BOOL)ignoreChainValidationErrors;
- (void)setIgnoreChainValidationErrors :(BOOL)newIgnoreChainValidationErrors;

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

InputBytes Property (JAdESSigner Module)

Use this property to pass the input to module in byte array form.

Syntax

• Swift
• Objective-C

public var inputBytes: Data {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (JAdESSigner Module)

The file to be signed.

Syntax

• Swift
• Objective-C

public var inputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

""

Remarks

Provide the path to the JSON to be signed.

InputString Property (JAdESSigner Module)

Use this property to pass the input to module in the string form.

Syntax

• Swift
• Objective-C

public var inputString: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=inputString,setter=setInputString:) NSString* inputString;

- (NSString*)inputString;
- (void)setInputString :(NSString*)newInputString;

Default Value

""

Remarks

Assign a string containing the data to be processed to this property.

KnownCertificates Property (JAdESSigner Module)

Additional certificates for chain validation.

Syntax

• Swift
• Objective-C

public var knownCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount;

- (int)knownCertCount;
- (void)setKnownCertCount :(int)newKnownCertCount;

- (NSData*)knownCertBytes:(int)knownCertIndex;

- (long long)knownCertHandle:(int)knownCertIndex;
- (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;

Default Value

""

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.

The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

KnownCRLs Property (JAdESSigner Module)

Additional CRLs for chain validation.

Syntax

• Swift
• Objective-C

public var knownCRLs: Array<CRL> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownCRLCount,setter=setKnownCRLCount:) int knownCRLCount;

- (int)knownCRLCount;
- (void)setKnownCRLCount :(int)newKnownCRLCount;

- (NSData*)knownCRLBytes:(int)knownCRLIndex;

- (long long)knownCRLHandle:(int)knownCRLIndex;
- (void)setKnownCRLHandle:(int)knownCRLIndex :(long long)newKnownCRLHandle;

Default Value

""

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

KnownOCSPs Property (JAdESSigner Module)

Additional OCSP responses for chain validation.

Syntax

• Swift
• Objective-C

public var knownOCSPs: Array<OCSPResponse> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=knownOCSPCount,setter=setKnownOCSPCount:) int knownOCSPCount;

- (int)knownOCSPCount;
- (void)setKnownOCSPCount :(int)newKnownOCSPCount;

- (NSData*)knownOCSPBytes:(int)knownOCSPIndex;

- (long long)knownOCSPHandle:(int)knownOCSPIndex;
- (void)setKnownOCSPHandle:(int)knownOCSPIndex :(long long)newKnownOCSPHandle;

Default Value

""

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

NewSignature Property (JAdESSigner Module)

Provides access to new signature properties.

Syntax

• Swift
• Objective-C

public var newSignature: JAdESSignature {
  get {...}
}

@property (nonatomic,readonly,assign,getter=newSigChainValidationDetails) int newSigChainValidationDetails;

- (int)newSigChainValidationDetails;

@property (nonatomic,readonly,assign,getter=newSigChainValidationResult) int newSigChainValidationResult;

- (int)newSigChainValidationResult;

@property (nonatomic,readwrite,assign,getter=newSigClaimedSigningTime,setter=setNewSigClaimedSigningTime:) NSString* newSigClaimedSigningTime;

- (NSString*)newSigClaimedSigningTime;
- (void)setNewSigClaimedSigningTime :(NSString*)newNewSigClaimedSigningTime;

@property (nonatomic,readonly,assign,getter=newSigCompatibilityErrors) int newSigCompatibilityErrors;

- (int)newSigCompatibilityErrors;

@property (nonatomic,readonly,assign,getter=newSigContainsLongTermInfo) BOOL newSigContainsLongTermInfo;

- (BOOL)newSigContainsLongTermInfo;

@property (nonatomic,readwrite,assign,getter=newSigContentType,setter=setNewSigContentType:) NSString* newSigContentType;

- (NSString*)newSigContentType;
- (void)setNewSigContentType :(NSString*)newNewSigContentType;

@property (nonatomic,readonly,assign,getter=newSigCountersigned) BOOL newSigCountersigned;

- (BOOL)newSigCountersigned;

@property (nonatomic,readonly,assign,getter=newSigEntityLabel) NSString* newSigEntityLabel;

- (NSString*)newSigEntityLabel;

@property (nonatomic,readwrite,assign,getter=newSigHandle,setter=setNewSigHandle:) long long newSigHandle;

- (long long)newSigHandle;
- (void)setNewSigHandle :(long long)newNewSigHandle;

@property (nonatomic,readwrite,assign,getter=newSigHashAlgorithm,setter=setNewSigHashAlgorithm:) NSString* newSigHashAlgorithm;

- (NSString*)newSigHashAlgorithm;
- (void)setNewSigHashAlgorithm :(NSString*)newNewSigHashAlgorithm;

@property (nonatomic,readonly,assign,getter=newSigIssuerRDN) NSString* newSigIssuerRDN;

- (NSString*)newSigIssuerRDN;

@property (nonatomic,readwrite,assign,getter=newSigJAdESVersion,setter=setNewSigJAdESVersion:) int newSigJAdESVersion;

- (int)newSigJAdESVersion;
- (void)setNewSigJAdESVersion :(int)newNewSigJAdESVersion;

@property (nonatomic,readonly,assign,getter=newSigLastArchivalTime) NSString* newSigLastArchivalTime;

- (NSString*)newSigLastArchivalTime;

@property (nonatomic,readwrite,assign,getter=newSigLevel,setter=setNewSigLevel:) int newSigLevel;

- (int)newSigLevel;
- (void)setNewSigLevel :(int)newNewSigLevel;

@property (nonatomic,readwrite,assign,getter=newSigObjectType,setter=setNewSigObjectType:) NSString* newSigObjectType;

- (NSString*)newSigObjectType;
- (void)setNewSigObjectType :(NSString*)newNewSigObjectType;

@property (nonatomic,readwrite,assign,getter=newSigParentEntity,setter=setNewSigParentEntity:) NSString* newSigParentEntity;

- (NSString*)newSigParentEntity;
- (void)setNewSigParentEntity :(NSString*)newNewSigParentEntity;

@property (nonatomic,readwrite,assign,getter=newSigPolicyHash,setter=setNewSigPolicyHash:) NSString* newSigPolicyHash;

- (NSString*)newSigPolicyHash;
- (void)setNewSigPolicyHash :(NSString*)newNewSigPolicyHash;

@property (nonatomic,readwrite,assign,getter=newSigPolicyHashAlgorithm,setter=setNewSigPolicyHashAlgorithm:) NSString* newSigPolicyHashAlgorithm;

- (NSString*)newSigPolicyHashAlgorithm;
- (void)setNewSigPolicyHashAlgorithm :(NSString*)newNewSigPolicyHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=newSigPolicyID,setter=setNewSigPolicyID:) NSString* newSigPolicyID;

- (NSString*)newSigPolicyID;
- (void)setNewSigPolicyID :(NSString*)newNewSigPolicyID;

@property (nonatomic,readwrite,assign,getter=newSigPolicyURI,setter=setNewSigPolicyURI:) NSString* newSigPolicyURI;

- (NSString*)newSigPolicyURI;
- (void)setNewSigPolicyURI :(NSString*)newNewSigPolicyURI;

@property (nonatomic,readonly,assign,getter=newSigSerialNumber) NSData* newSigSerialNumber;

- (NSData*)newSigSerialNumber;

@property (nonatomic,readonly,assign,getter=newSigSignatureBytes) NSData* newSigSignatureBytes;

- (NSData*)newSigSignatureBytes;

@property (nonatomic,readonly,assign,getter=newSigSignatureValidationResult) int newSigSignatureValidationResult;

- (int)newSigSignatureValidationResult;

@property (nonatomic,readwrite,assign,getter=newSigSignedData,setter=setNewSigSignedData:) NSString* newSigSignedData;

- (NSString*)newSigSignedData;
- (void)setNewSigSignedData :(NSString*)newNewSigSignedData;

@property (nonatomic,readwrite,assign,getter=newSigSignedDataType,setter=setNewSigSignedDataType:) int newSigSignedDataType;

- (int)newSigSignedDataType;
- (void)setNewSigSignedDataType :(int)newNewSigSignedDataType;

@property (nonatomic,readonly,assign,getter=newSigSubjectKeyID) NSData* newSigSubjectKeyID;

- (NSData*)newSigSubjectKeyID;

@property (nonatomic,readonly,assign,getter=newSigSubjectRDN) NSString* newSigSubjectRDN;

- (NSString*)newSigSubjectRDN;

@property (nonatomic,readonly,assign,getter=newSigTimestamped) BOOL newSigTimestamped;

- (BOOL)newSigTimestamped;

@property (nonatomic,readonly,assign,getter=newSigValidatedSigningTime) NSString* newSigValidatedSigningTime;

- (NSString*)newSigValidatedSigningTime;

@property (nonatomic,readonly,assign,getter=newSigValidationLog) NSString* newSigValidationLog;

- (NSString*)newSigValidationLog;

 

Default Value

""

Remarks

Use this property to tune-up signature properties.

OCSPs Property (JAdESSigner Module)

A collection of OCSP responses embedded into the signature.

Syntax

• Swift
• Objective-C

public var ocsPs: Array<OCSPResponse> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=OCSPCount) int OCSPCount;

- (int)OCSPCount;

- (NSData*)OCSPBytes:(int)oCSPIndex;

- (int)OCSPEntryCount:(int)oCSPIndex;

- (long long)OCSPHandle:(int)oCSPIndex;

- (NSString*)OCSPIssuer:(int)oCSPIndex;

- (NSString*)OCSPIssuerRDN:(int)oCSPIndex;

- (NSString*)OCSPLocation:(int)oCSPIndex;

- (NSString*)OCSPProducedAt:(int)oCSPIndex;

- (NSString*)OCSPSigAlgorithm:(int)oCSPIndex;

- (int)OCSPSource:(int)oCSPIndex;

Default Value

""

Remarks

Use this property to access the OCSP responses embedded into the signature by its creator.

OfflineMode Property (JAdESSigner Module)

Switches the module to offline mode.

Syntax

• Swift
• Objective-C

public var offlineMode: Bool {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=offlineMode,setter=setOfflineMode:) BOOL offlineMode;

- (BOOL)offlineMode;
- (void)setOfflineMode :(BOOL)newOfflineMode;

Default Value

False

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OutputBytes Property (JAdESSigner Module)

Use this property to read the output the module object has produced.

Syntax

• Swift
• Objective-C

public var outputBytes: Data {
  get {...}
}

@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (JAdESSigner Module)

Defines where to save the signature.

Syntax

• Swift
• Objective-C

public var outputFile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

""

Remarks

Specifies the path where the JWS/JAdES signature should be saved.

OutputString Property (JAdESSigner Module)

Use this property to read the output the module object has produced.

Syntax

• Swift
• Objective-C

public var outputString: String {
  get {...}
}

@property (nonatomic,readonly,assign,getter=outputString) NSString* outputString;

- (NSString*)outputString;

Default Value

""

Remarks

Read the contents of this property after the operation is completed to read the produced output. This property will only be set if OutputFile and OutputStream properties had not been assigned.

This property is read-only.

Profile Property (JAdESSigner Module)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

• Swift
• Objective-C

public var profile: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=profile,setter=setProfile:) NSString* profile;

- (NSString*)profile;
- (void)setProfile :(NSString*)newProfile;

Default Value

""

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (JAdESSigner Module)

The proxy server settings.

Syntax

• Swift
• Objective-C

public var proxy: ProxySettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress;

- (NSString*)proxyAddress;
- (void)setProxyAddress :(NSString*)newProxyAddress;

@property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication;

- (int)proxyAuthentication;
- (void)setProxyAuthentication :(int)newProxyAuthentication;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType;

- (int)proxyProxyType;
- (void)setProxyProxyType :(int)newProxyProxyType;

@property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders;

- (NSString*)proxyRequestHeaders;
- (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders;

@property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody;

- (NSString*)proxyResponseBody;
- (void)setProxyResponseBody :(NSString*)newProxyResponseBody;

@property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders;

- (NSString*)proxyResponseHeaders;
- (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders;

@property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6;

- (BOOL)proxyUseIPv6;
- (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6;

@property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername;

- (NSString*)proxyUsername;
- (void)setProxyUsername :(NSString*)newProxyUsername;

 

Default Value

""

Remarks

Use this property to tune up the proxy server settings.

RevocationCheck Property (JAdESSigner Module)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

• Swift
• Objective-C

public var revocationCheck: JAdESSignerRevocationChecks {
  get {...}
  set {...}
}

public enum JAdESSignerRevocationChecks: Int32 {
  case crcNone = 0
  case crcAuto = 1
  case crcAllCRL = 2
  case crcAllOCSP = 3
  case crcAllCRLAndOCSP = 4
  case crcAnyCRL = 5
  case crcAnyOCSP = 6
  case crcAnyCRLOrOCSP = 7
  case crcAnyOCSPOrCRL = 8
}

@property (nonatomic,readwrite,assign,getter=revocationCheck,setter=setRevocationCheck:) int revocationCheck;

- (int)revocationCheck;
- (void)setRevocationCheck :(int)newRevocationCheck;

Default Value

1

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

Signatures Property (JAdESSigner Module)

Provides details of all signatures found in the JWS/JAdES signature.

Syntax

• Swift
• Objective-C

public var signatures: Array<JAdESSignature> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=signatureCount) int signatureCount;

- (int)signatureCount;

- (int)signatureChainValidationDetails:(int)signatureIndex;

- (int)signatureChainValidationResult:(int)signatureIndex;

- (NSString*)signatureClaimedSigningTime:(int)signatureIndex;

- (int)signatureCompatibilityErrors:(int)signatureIndex;

- (BOOL)signatureContainsLongTermInfo:(int)signatureIndex;

- (NSString*)signatureContentType:(int)signatureIndex;

- (BOOL)signatureCountersigned:(int)signatureIndex;

- (NSString*)signatureEntityLabel:(int)signatureIndex;

- (long long)signatureHandle:(int)signatureIndex;

- (NSString*)signatureHashAlgorithm:(int)signatureIndex;

- (NSString*)signatureIssuerRDN:(int)signatureIndex;

- (int)signatureJAdESVersion:(int)signatureIndex;

- (NSString*)signatureLastArchivalTime:(int)signatureIndex;

- (int)signatureLevel:(int)signatureIndex;

- (NSString*)signatureObjectType:(int)signatureIndex;

- (NSString*)signatureParentEntity:(int)signatureIndex;

- (NSString*)signaturePolicyHash:(int)signatureIndex;

- (NSString*)signaturePolicyHashAlgorithm:(int)signatureIndex;

- (NSString*)signaturePolicyID:(int)signatureIndex;

- (NSString*)signaturePolicyURI:(int)signatureIndex;

- (NSData*)signatureSerialNumber:(int)signatureIndex;

- (NSData*)signatureSignatureBytes:(int)signatureIndex;

- (int)signatureSignatureValidationResult:(int)signatureIndex;

- (NSString*)signatureSignedData:(int)signatureIndex;

- (int)signatureSignedDataType:(int)signatureIndex;

- (NSData*)signatureSubjectKeyID:(int)signatureIndex;

- (NSString*)signatureSubjectRDN:(int)signatureIndex;

- (BOOL)signatureTimestamped:(int)signatureIndex;

- (NSString*)signatureValidatedSigningTime:(int)signatureIndex;

- (NSString*)signatureValidationLog:(int)signatureIndex;

Default Value

""

Remarks

Use this property to get the details of all the signatures identified in the JWS/JAdES signature.

SigningCertificate Property (JAdESSigner Module)

The certificate to be used for signing.

Syntax

• Swift
• Objective-C

public var signingCertificate: Certificate {
  get {...}
  set {...}
}

@property (nonatomic,readonly,assign,getter=signingCertBytes) NSData* signingCertBytes;

- (NSData*)signingCertBytes;

@property (nonatomic,readwrite,assign,getter=signingCertHandle,setter=setSigningCertHandle:) long long signingCertHandle;

- (long long)signingCertHandle;
- (void)setSigningCertHandle :(long long)newSigningCertHandle;

 

Default Value

""

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

SigningChain Property (JAdESSigner Module)

The signing certificate chain.

Syntax

• Swift
• Objective-C

public var signingChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=signingChainCount,setter=setSigningChainCount:) int signingChainCount;

- (int)signingChainCount;
- (void)setSigningChainCount :(int)newSigningChainCount;

- (NSData*)signingChainBytes:(int)signingChainIndex;

- (long long)signingChainHandle:(int)signingChainIndex;
- (void)setSigningChainHandle:(int)signingChainIndex :(long long)newSigningChainHandle;

Default Value

""

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

SocketSettings Property (JAdESSigner Module)

Manages network connection settings.

Syntax

• Swift
• Objective-C

public var socketSettings: SocketSettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode;

- (int)socketDNSMode;
- (void)setSocketDNSMode :(int)newSocketDNSMode;

@property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort;

- (int)socketDNSPort;
- (void)setSocketDNSPort :(int)newSocketDNSPort;

@property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout;

- (int)socketDNSQueryTimeout;
- (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout;

@property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers;

- (NSString*)socketDNSServers;
- (void)setSocketDNSServers :(NSString*)newSocketDNSServers;

@property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout;

- (int)socketDNSTotalTimeout;
- (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout;

@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

 

Default Value

""

Remarks

Use this property to tune up network connection parameters.

Timestamps Property (JAdESSigner Module)

Contains a collection of timestamps for the processed document.

Syntax

• Swift
• Objective-C

public var timestamps: Array<TimestampInfo> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=timestampCount) int timestampCount;

- (int)timestampCount;

- (long long)timestampAccuracy:(int)timestampIndex;

- (NSData*)timestampBytes:(int)timestampIndex;

- (int)timestampCertificateIndex:(int)timestampIndex;

- (int)timestampChainValidationDetails:(int)timestampIndex;

- (int)timestampChainValidationResult:(int)timestampIndex;

- (BOOL)timestampContainsLongTermInfo:(int)timestampIndex;

- (NSString*)timestampEntityLabel:(int)timestampIndex;

- (NSString*)timestampHashAlgorithm:(int)timestampIndex;

- (NSString*)timestampParentEntity:(int)timestampIndex;

- (NSData*)timestampSerialNumber:(int)timestampIndex;

- (NSString*)timestampTime:(int)timestampIndex;

- (int)timestampTimestampType:(int)timestampIndex;

- (NSString*)timestampTSAName:(int)timestampIndex;

- (NSString*)timestampValidationLog:(int)timestampIndex;

- (int)timestampValidationResult:(int)timestampIndex;

Default Value

""

Remarks

Use this property to access the timestamps included in the processed document.

TimestampServer Property (JAdESSigner Module)

The address of the timestamping server.

Syntax

• Swift
• Objective-C

public var timestampServer: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=timestampServer,setter=setTimestampServer:) NSString* timestampServer;

- (NSString*)timestampServer;
- (void)setTimestampServer :(NSString*)newTimestampServer;

Default Value

""

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256&ignorenonce=true

Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

The ignorenonce parameter allows you to switch off client nonce verification to enable compatibility with TSA services that do not support nonce mirroring.

All the parameters are optional.

TLSClientChain Property (JAdESSigner Module)

The TLS client certificate chain.

Syntax

• Swift
• Objective-C

public var tlsClientChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=TLSClientCertCount,setter=setTLSClientCertCount:) int TLSClientCertCount;

- (int)TLSClientCertCount;
- (void)setTLSClientCertCount :(int)newTLSClientCertCount;

- (NSData*)TLSClientCertBytes:(int)tLSClientCertIndex;

- (long long)TLSClientCertHandle:(int)tLSClientCertIndex;
- (void)setTLSClientCertHandle:(int)tLSClientCertIndex :(long long)newTLSClientCertHandle;

Default Value

""

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.

Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.

TLSServerChain Property (JAdESSigner Module)

The TLS server's certificate chain.

Syntax

• Swift
• Objective-C

public var tlsServerChain: Array<Certificate> {
  get {...}
}

@property (nonatomic,readonly,assign,getter=TLSServerCertCount) int TLSServerCertCount;

- (int)TLSServerCertCount;

- (NSData*)TLSServerCertBytes:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertFingerprint:(int)tLSServerCertIndex;

- (long long)TLSServerCertHandle:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertIssuer:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertIssuerRDN:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertKeyAlgorithm:(int)tLSServerCertIndex;

- (int)TLSServerCertKeyBits:(int)tLSServerCertIndex;

- (int)TLSServerCertKeyUsage:(int)tLSServerCertIndex;

- (BOOL)TLSServerCertSelfSigned:(int)tLSServerCertIndex;

- (NSData*)TLSServerCertSerialNumber:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSigAlgorithm:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSubject:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSubjectRDN:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertValidFrom:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertValidTo:(int)tLSServerCertIndex;

Default Value

""

Remarks

Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.

TLSSettings Property (JAdESSigner Module)

Manages TLS layer settings.

Syntax

• Swift
• Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSClientAuth,setter=setTLSClientAuth:) int TLSClientAuth;

- (int)TLSClientAuth;
- (void)setTLSClientAuth :(int)newTLSClientAuth;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

 

Default Value

""

Remarks

Use this property to tune up the TLS layer parameters.

TrustedCertificates Property (JAdESSigner Module)

A list of trusted certificates for chain validation.

Syntax

• Swift
• Objective-C

public var trustedCertificates: Array<Certificate> {
  get {...}
}

@property (nonatomic,readwrite,assign,getter=trustedCertCount,setter=setTrustedCertCount:) int trustedCertCount;

- (int)trustedCertCount;
- (void)setTrustedCertCount :(int)newTrustedCertCount;

- (NSData*)trustedCertBytes:(int)trustedCertIndex;

- (long long)trustedCertHandle:(int)trustedCertIndex;
- (void)setTrustedCertHandle:(int)trustedCertIndex :(long long)newTrustedCertHandle;

Default Value

""

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

ValidationMoment Property (JAdESSigner Module)

The time point at which signature validity is to be established.

Syntax

• Swift
• Objective-C

public var validationMoment: String {
  get {...}
  set {...}
}

@property (nonatomic,readwrite,assign,getter=validationMoment,setter=setValidationMoment:) NSString* validationMoment;

- (NSString*)validationMoment;
- (void)setValidationMoment :(NSString*)newValidationMoment;

Default Value

""

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

AddSignedHTTPHeaderField Method (JAdESSigner Module)

Use this method to add HTTP header field.

Syntax

• Swift
• Objective-C

public func addSignedHTTPHeaderField(fieldName: String) throws -> Void

- (void)addSignedHTTPHeaderField:(NSString*)fieldName;

Remarks

This method allows you to add HTTP header field to the list of fields that will be signed. The method takes one parameter: the name of the header field.

This method changes the type of signed data to HttpHeaders mechanism and triggers the HTTPHeaderFieldNeeded event when the value of the HTTP header field is needed.

Use "(request target)" value as a field name to add request method and target URI into the list of fields that will be signed.

AddSignedObject Method (JAdESSigner Module)

Use this method to add an object.

Syntax

• Swift
• Objective-C

public func addSignedObject(uri: String, contentType: String) throws -> Void

- (void)addSignedObject:(NSString*)URI :(NSString*)contentType;

Remarks

This method allows you to add an object to the list of objects that will be signed. The signed object is identified by its URI.

This method changes the type of signed data to ObjectByURI mechanism and triggers the ObjectNeeded event when the data of the object is needed.

AddSignedObjectHash Method (JAdESSigner Module)

Use this method to add an object hash.

Syntax

• Swift
• Objective-C

public func addSignedObjectHash(uri: String, contentType: String, hashData: Data) throws -> Void

- (void)addSignedObjectHash:(NSString*)URI :(NSString*)contentType :(NSData*)hash;

Remarks

This method allows you to add an object hash to the list of objects that will be signed. The signed object is identified by its URI.

This method changes the type of signed data to ObjectByURIHash mechanism and triggers the ObjectValidate event when the object must be validated. Also, it triggers the ObjectNeeded event when the data of the object is needed this could occur while adding/validating SignedData or Archive timestamps.

Close Method (JAdESSigner Module)

Closes an opened JWS/JAdES signature.

Syntax

• Swift
• Objective-C

public func close(saveChanges: Bool) throws -> Void

- (void)close:(BOOL)saveChanges;

Remarks

Use this method to close a previously opened JWS/JAdES signature. Set SaveChanges to true to apply any changes made.

Config Method (JAdESSigner Module)

Sets or retrieves a configuration setting.

Syntax

• Swift
• Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateNew Method (JAdESSigner Module)

Create a new JSON for signing.

Syntax

• Swift
• Objective-C

public func createNew() throws -> Void

- (void)createNew;

Remarks

Use this method to create a new JSON for signing. When finished, call Close to complete or discard the operation.

DoAction Method (JAdESSigner Module)

Performs an additional action.

Syntax

• Swift
• Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (JAdESSigner Module)

Extracts user data from the DC signing service response.

Syntax

• Swift
• Objective-C

public func extractAsyncData(asyncReply: String) throws -> String

- (NSString*)extractAsyncData:(NSString*)asyncReply;

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

Open Method (JAdESSigner Module)

Opens a JSON for signing or updating.

Syntax

• Swift
• Objective-C

public func open() throws -> Void

- (void)open;

Remarks

Use this method to open a JSON for signing or updating. When finished, call Close to complete or discard the operation.

Reset Method (JAdESSigner Module)

Resets the component settings.

Syntax

• Swift
• Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

Revalidate Method (JAdESSigner Module)

Revalidates a signature in accordance with current settings.

Syntax

• Swift
• Objective-C

public func revalidate(sigLabel: String) throws -> Void

- (void)revalidate:(NSString*)sigLabel;

Remarks

Use this method to re-validate a signature in the opened JWS/JAdES signature.

SelectInfo Method (JAdESSigner Module)

Select signature information for a specific entity.

Syntax

• Swift
• Objective-C

public func selectInfo(entityLabel: String, infoType: Int32, clearSelection: Bool) throws -> Void

- (void)selectInfo:(NSString*)entityLabel :(int)infoType :(BOOL)clearSelection;

Remarks

Use this method to select (or filter) signature-related information for a specific signature element.

Provide the unique label of the entity that you are interested in via the EntityLabel parameter. Use one of the following filters, or their combination, to specify what information you are interested in:

Following the call, the relevant pieces of information will be copied to the respective component properties (Certificates, CRLs, OCSPs). Note that you can accumulate information in the properties by making repeated calls to SelectInfo and keeping ClearSelection set to false.

This method is useful if you would like to read/display detailed information about a particular signature or timestamp.

Sign Method (JAdESSigner Module)

Creates a new JAdES/JWS signature over the provided data.

Syntax

• Swift
• Objective-C

public func sign() throws -> Void

- (void)sign;

Remarks

Call this method to produce a new signature over the provided data.

SignAsyncBegin Method (JAdESSigner Module)

Initiates the asynchronous signing operation.

Syntax

• Swift
• Objective-C

public func signAsyncBegin() throws -> String

- (NSString*)signAsyncBegin;

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (JAdESSigner Module)

Completes the asynchronous signing operation.

Syntax

• Swift
• Objective-C

public func signAsyncEnd(asyncReply: String) throws -> Void

- (void)signAsyncEnd:(NSString*)asyncReply;

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignExternal Method (JAdESSigner Module)

Signs the data using an external signing facility.

Syntax

• Swift
• Objective-C

public func signExternal() throws -> Void

- (void)signExternal;

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.

Timestamp Method (JAdESSigner Module)

Use this method to add timestamp.

Syntax

• Swift
• Objective-C

public func timestamp(sigLabel: String, timestampType: Int32) throws -> Void

- (void)timestamp:(NSString*)sigLabel :(int)timestampType;

Remarks

Call this method to timestamp the signature. Use the TimestampServer property to provide the address of the TSA (Time Stamping Authority) server which should be used for timestamping. Use the TimestampType parameter to specify the type of timestamp to create

Supported timestamp types:

Upgrade Method (JAdESSigner Module)

Upgrades existing JAdES signature to a new level.

Syntax

• Swift
• Objective-C

public func upgrade(sigLabel: String, upgradeKind: Int32) throws -> Void

- (void)upgrade:(NSString*)sigLabel :(int)upgradeKind;

Remarks

Use this method to upgrade JAdES signature to a new level specified by UpgradeKind. Signatures can normally be upgraded from less sophisticated levels (B, T, LT) to more sophisticated (T, LT, LTA).

Supported levels:

The supported additional upgrade kinds are:

ChainElementDownload Event (JAdESSigner Module)

Fires when there is a need to download a chain element from an online source.

Syntax

• Swift
• Objective-C

func onChainElementDownload(kind: Int32, certRDN: String, caCertRDN: String, location: String, action: inout Int32)

- (void)onChainElementDownload:(int)kind :(NSString*)certRDN :(NSString*)CACertRDN :(NSString*)location :(int*)action;

Remarks

Subscribe to this event to be notified about validation element retrievals. Use the Action parameter to suppress the download if required.

ChainElementNeeded Event (JAdESSigner Module)

Fires when an element required to validate the chain was not located.

Syntax

• Swift
• Objective-C

func onChainElementNeeded(kind: Int32, certRDN: String, caCertRDN: String)

- (void)onChainElementNeeded:(int)kind :(NSString*)certRDN :(NSString*)CACertRDN;

Remarks

Subscribe to this event to be notified about missing validation elements. Use the KnownCRLs, KnownCertificates, and KnownOCSPs properties in the event handler to provide the missing piece.

ChainElementStore Event (JAdESSigner Module)

This event is fired when a chain element (certificate, CRL, or OCSP response) should be stored along with a signature.

Syntax

• Swift
• Objective-C

func onChainElementStore(kind: Int32, body: Data, uri: inout String)

- (void)onChainElementStore:(int)kind :(NSData*)body :(NSString**)URI;

Remarks

This event could occur if you are verifying XAdES-C form or higher. The Body parameter contains the element in binary form that should be stored along with a signature. Use the URI parameter to provide an URI of the stored element.

ChainValidated Event (JAdESSigner Module)

Reports the completion of a certificate chain validation.

Syntax

• Swift
• Objective-C

func onChainValidated(index: Int32, entityLabel: String, subjectRDN: String, validationResult: Int32, validationDetails: Int32, cancel: inout Bool)

- (void)onChainValidated:(int)index :(NSString*)entityLabel :(NSString*)subjectRDN :(int)validationResult :(int)validationDetails :(int*)cancel;

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.

ChainValidationProgress Event (JAdESSigner Module)

This event is fired multiple times during chain validation to report various stages of the validation procedure.

Syntax

• Swift
• Objective-C

func onChainValidationProgress(eventKind: String, certRDN: String, caCertRDN: String, action: inout Int32)

- (void)onChainValidationProgress:(NSString*)eventKind :(NSString*)certRDN :(NSString*)CACertRDN :(int*)action;

Remarks

Subscribe to this event to be notified about chain validation progress. Use the Action parameter to alter the validation flow.

The EventKind parameter reports the nature of the event being reported. The CertRDN and CACertRDN parameters report the distinguished names of the certificates that are relevant for the event invocation (one or both can be empty, depending on EventKind). Use the Action parameter to adjust the validation flow.

Error Event (JAdESSigner Module)

Information about errors during signing.

Syntax

• Swift
• Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

This event is fired in case of exceptional conditions during the JSON processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (JAdESSigner Module)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

• Swift
• Objective-C

func onExternalSign(operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)

- (void)onExternalSign:(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

HTTPHeaderFieldNeeded Event (JAdESSigner Module)

This event is fired when HTTP header field value is required.

Syntax

• Swift
• Objective-C

func onHTTPHeaderFieldNeeded(fieldName: String, fieldValues: inout String)

- (void)onHTTPHeaderFieldNeeded:(NSString*)fieldName :(NSString**)fieldValues;

Remarks

This event is triggered when the type of signed data is HttpHeaders mechanism (jasdtHttpHeaders). It indicates that a HTTP header field value is needed.

For "(request target)" field name value return request method and target URI seperated by space character. For example: "GET https://nsoftware.com/sbb/"

Loaded Event (JAdESSigner Module)

This event is fired when the JSON has been loaded into memory.

Syntax

• Swift
• Objective-C

func onLoaded(cancel: inout Bool)

- (void)onLoaded:(int*)cancel;

Remarks

The handler for this event is a good place to check JWS/JAdES signature properties, which may be useful when preparing the signature.

Set Cancel to true to terminate JSON processing on this stage.

Notification Event (JAdESSigner Module)

This event notifies the application about an underlying control flow event.

Syntax

• Swift
• Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

ObjectNeeded Event (JAdESSigner Module)

This event is fired when object is required.

Syntax

• Swift
• Objective-C

func onObjectNeeded(uri: String, contentType: String, base64: inout Bool)

- (void)onObjectNeeded:(NSString*)URI :(NSString*)contentType :(int*)base64;

Remarks

This event is triggered when the type of signed data is ObjectIdByURI mechanism (jasdtObjectIdByURI). It is fired to request the data to be signed/verified.

The event handler must pass object data to the component via DataFile or DataStream or DataBytes or DataString property.

ObjectValidate Event (JAdESSigner Module)

This event is fired when object should be verified by user.

Syntax

• Swift
• Objective-C

func onObjectValidate(uri: String, contentType: String, hashAlgorithm: String, hash: Data, base64: Bool, valid: inout Bool)

- (void)onObjectValidate:(NSString*)URI :(NSString*)contentType :(NSString*)hashAlgorithm :(NSData*)hash :(BOOL)base64 :(int*)valid;

Remarks

This event is triggered when the type of signed data is ObjectIdByURIHash mechanism (jasdtObjectIdByURIHash). It is fired to validate the detached object.

The event handler must pass the object validity to the component via Valid parameter.

SignatureFound Event (JAdESSigner Module)

Signifies the start of signature validation.

Syntax

• Swift
• Objective-C

func onSignatureFound(index: Int32, entityLabel: String, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateSignature: inout Bool, validateChain: inout Bool)

- (void)onSignatureFound:(int)index :(NSString*)entityLabel :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateSignature :(int*)validateChain;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (JAdESSigner Module)

Marks the completion of the signature validation routine.

Syntax

• Swift
• Objective-C

func onSignatureValidated(index: Int32, entityLabel: String, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, validationResult: Int32, cancel: inout Bool)

- (void)onSignatureValidated:(int)index :(NSString*)entityLabel :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(int)validationResult :(int*)cancel;

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.

TimestampFound Event (JAdESSigner Module)

Signifies the start of a timestamp validation routine.

Syntax

• Swift
• Objective-C

func onTimestampFound(index: Int32, entityLabel: String, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateTimestamp: inout Bool, validateChain: inout Bool)

- (void)onTimestampFound:(int)index :(NSString*)entityLabel :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateTimestamp :(int*)validateChain;

Remarks

This event fires for every timestamp identified during signature processing, and reports the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Just like with signature validation, timestamp validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

TimestampRequest Event (JAdESSigner Module)

Fires when the component is ready to request a timestamp from an external TSA.

Syntax

• Swift
• Objective-C

func onTimestampRequest(tsa: String, timestampRequest: String, timestampResponse: inout String, suppressDefault: inout Bool)

- (void)onTimestampRequest:(NSString*)TSA :(NSString*)timestampRequest :(NSString**)timestampResponse :(int*)suppressDefault;

Remarks

Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

TimestampValidated Event (JAdESSigner Module)

Reports the completion of the timestamp validation routine.

Syntax

• Swift
• Objective-C

func onTimestampValidated(index: Int32, entityLabel: String, issuerRDN: String, serialNumber: Data, subjectKeyID: Data, time: String, validationResult: Int32, chainValidationResult: Int32, chainValidationDetails: Int32, cancel: inout Bool)

- (void)onTimestampValidated:(int)index :(NSString*)entityLabel :(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(NSString*)time :(int)validationResult :(int)chainValidationResult :(int)chainValidationDetails :(int*)cancel;

Remarks

This event is fired upon the completion of the timestamp validation routine, and reports the respective validation result.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a failure.

TLSCertNeeded Event (JAdESSigner Module)

Fires when a remote TLS party requests a client certificate.

Syntax

• Swift
• Objective-C

func onTLSCertNeeded(host: String, caNames: String)

- (void)onTLSCertNeeded:(NSString*)host :(NSString*)CANames;

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (JAdESSigner Module)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

• Swift
• Objective-C

func onTLSCertValidate(serverHost: String, serverIP: String, accept: inout Bool)

- (void)onTLSCertValidate:(NSString*)serverHost :(NSString*)serverIP :(int*)accept;

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

TLSEstablished Event (JAdESSigner Module)

Fires when a TLS handshake with Host successfully completes.

Syntax

• Swift
• Objective-C

func onTLSEstablished(host: String, version: String, ciphersuite: String, connectionId: Data, abort: inout Bool)

- (void)onTLSEstablished:(NSString*)host :(NSString*)version :(NSString*)ciphersuite :(NSData*)connectionId :(int*)abort;

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (JAdESSigner Module)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

• Swift
• Objective-C

func onTLSHandshake(host: String, abort: inout Bool)

- (void)onTLSHandshake:(NSString*)host :(int*)abort;

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (JAdESSigner Module)

Reports the graceful closure of a TLS connection.

Syntax

• Swift
• Objective-C

func onTLSShutdown(host: String)

- (void)onTLSShutdown:(NSString*)host;

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

Fields

Constructors

public init(stream: )

public init()

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

Fields

Constructors

public init()

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

Fields

Constructors

public init()

JAdESSignature Type

The component is a container for an JWS/JAdES signature.

Remarks

JSON message may include any number of JWS/JAdES signatures. class stores one of them.

Fields

Constructors

public init()

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).

An OCSP response is a snapshot of the certificate status at a given time.

Fields

Constructors

public init()

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

Fields

Constructors

public init()

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

Fields