MailReader Module

Properties Methods Events Config Settings Errors

The MailReader module implements parsing and decryption of e-mail messages.

Syntax

SecureBlackbox.MailReader

Remarks

MailReader parses and decrypts e-mail messages, as well as verifies electronic signatures.

Loading a e-mail message and accessing its properties: MailReader reader = new MailReader(); reader.LoadFromFile("path\\message.eml"); Console.WriteLine($"From: {reader.Message.From}"); Console.WriteLine($"To : {reader.Message.SendTo}"); Console.WriteLine($"Subject: {reader.Message.Subject}"); Console.WriteLine($"Attachments: {reader.Message.AttachmentCount}"); Console.WriteLine("Plain text:"); Console.WriteLine(reader.Message.PlainText);

Checking a signed message and validating its signature: MailReader reader = new MailReader(); reader.LoadFromFile("path\\message.eml"); if (reader.SecurityInfo.Signed) { if (reader.SecurityInfo.SignatureValidationResult == SignatureValidities.svtValid) Console.WriteLine($"Signed by {reader.SigningCertificate.Subject} and the signature is valid"); else Console.WriteLine("Signature is NOT valid"); }

Processing an encrypted e-mail message: MailReader reader = new MailReader(); reader.OnDecryptionInfoNeeded += (s, e) => { // here you should provide a certificate for decryption; // use the provided IssuerRDN and SerialNumber/SubjectKeyID // values to find an appropriate certificate, then // assign the certificate to DecryptionCertificate property; // the certificate should include its private key }; reader.LoadFromFile("path\\message.eml");

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


Attachments	Provides access to Message's attachments.
Bcc	The contents of the BCC header field of the Message.
BlockedCertificates	The certificates that must be rejected as trust anchors.
Cc	The value of the CC header field of the Message.
DecryptionCertificate	The certificate to be used for decryption.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
From	Contains the value of the From header of the Message.
IgnoreChainValidationErrors	Makes the module tolerant to chain validation errors.
KnownCertificates	Additional certificates for chain validation.
KnownCRLs	Additional CRLs for chain validation.
KnownOCSPs	Additional OCSP responses for chain validation.
Message	The message that is currently stored in the module.
OfflineMode	Switches the module to offline mode.
OtherHeaders	Contains secondary headers of the mail message.
Profile	Specifies a pre-defined profile to apply when creating the signature.
Proxy	The proxy server settings.
ReplyTo	The value of the Reply-To header field of the Message.
RevocationCheck	Specifies the kind(s) of revocation check to perform for all chain certificates.
SecurityInfo	Contains the Message's security info.
Sender	The value of the Sender header field of the Message.
SendTo	The value of the To header field of the Message.
SigningCertificate	The certificate of the signature creator.
SocketSettings	Manages network connection settings.
TLSSettings	Manages TLS layer settings.
TrustedCertificates	A list of trusted certificates for chain validation.
UsedCertificates	Contains a list of certificates used during the chain validation routine.
ValidationMoment	The time point at which signature validity is to be established.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
FindAttachment	Looks up a Message's attachment by its ID.
LoadFromBytes	Loads an e-mail message from a byte array.
LoadFromFile	Loads an e-mail message from a file.
Reset	Resets the module settings.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


ChainValidated	Reports the completion of a certificate chain validation.
DecryptionInfoNeeded	Asks the application to provide a decryption certificate.
Error	Reports information about errors during e-mail message loading, parsing or saving.
ExternalDecrypt	Handles remote or external decryption.
Notification	This event notifies the application about an underlying control flow event.
SignatureFound	Signifies the start of signature validation.
SignatureValidated	Marks the completion of the signature validation routine.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


ChainCurrentCACert	Returns the current CA certificate.
ChainCurrentCert	Returns the certificate that is currently being validated.
ChainCurrentCRL	Returns the current CRL.
ChainCurrentCRLSize	Returns the size of the current CRL.
ChainCurrentOCSP	Returns the current OCSP response.
ChainCurrentOCSPSigner	Returns the signer of the current OCSP object.
ChainInterimDetails	Returns the current interim validation details.
ChainInterimResult	Returns the current interim validation result.
CheckValidityPeriodForTrusted	Whether to check validity period for trusted certificates.
DislikeOpenEndedOCSPs	Tells the module to discourage OCSP responses without an explicit NextUpdate parameter.
ForceCompleteChainValidation	Whether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriod	Specifies a grace period to apply during revocation information checks.
HeaderCharset	Charset of the header. If not empty, the one specified in the message header will be ignored.
IgnoreChainLoops	Whether chain loops should be ignored.
IgnoreOCSPNoCheckExtension	Whether the OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
MaxHeaderSize	Specifies the maximum mail message header size in bytes.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
TempPath	Path for storing temporary files.
TextCharset	Charset of text parts, if any. If not empty, the one specified in the message text parts will be ignored.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
UseMicrosoftCTL	Enables or disables the automatic use of the Microsoft online certificate trust list.
UseSystemCertificates	Enables or disables the use of the system certificates.
UseValidationCache	Enables or disable the use of the product-wide certificate chain validation cache.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

Attachments Property (MailReader Module)

Provides access to Message's attachments.

public var attachments: Array<MailAttachment> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=attachCount) int attachCount;

- (int)attachCount;

- (NSString*)attachContentSubtype:(int)attachIndex;

- (NSString*)attachContentType:(int)attachIndex;

- (NSString*)attachCreationDate:(int)attachIndex;

- (NSData*)attachData:(int)attachIndex;

- (NSString*)attachDescription:(int)attachIndex;

- (NSString*)attachFileName:(int)attachIndex;

- (long long)attachHandle:(int)attachIndex;

- (NSString*)attachID:(int)attachIndex;

- (NSString*)attachModificationDate:(int)attachIndex;

- (NSString*)attachReadDate:(int)attachIndex;

- (long long)attachSize:(int)attachIndex;

Default Value

Remarks

Use this property to access the attachments of the loaded message.

Bcc Property (MailReader Module)

The contents of the BCC header field of the Message.

Syntax

Swift
Objective-C

public var bcc: Array<MailAddress> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=bccAddrCount) int bccAddrCount;

- (int)bccAddrCount;

- (NSString*)bccAddrAddress:(int)bccAddrIndex;

- (NSString*)bccAddrDisplayName:(int)bccAddrIndex;

- (NSString*)bccAddrGroupName:(int)bccAddrIndex;

Default Value

Remarks

The BCC header field contains the addresses of secondary recipients of the message whose addresses are not to be revealed to other recipients of the message.

Mail servers remove the BCC header when processing the message and use its value for dispatching the message only.

BlockedCertificates Property (MailReader Module)

The certificates that must be rejected as trust anchors.

Syntax

Swift
Objective-C

public var blockedCertificates: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=blockedCertCount,setter=setBlockedCertCount:) int blockedCertCount;

- (int)blockedCertCount;
- (void)setBlockedCertCount :(int)newBlockedCertCount;

- (NSData*)blockedCertBytes:(int)blockedCertIndex;

- (long long)blockedCertHandle:(int)blockedCertIndex;
- (void)setBlockedCertHandle:(int)blockedCertIndex :(long long)newBlockedCertHandle;

Default Value

Remarks

Use this property to provide a list of compromised or blocked certificates. Any chain containing a blocked certificate will fail validation.

Cc Property (MailReader Module)

The value of the CC header field of the Message.

Syntax

Swift
Objective-C

public var cc: Array<MailAddress> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=ccAddrCount) int ccAddrCount;

- (int)ccAddrCount;

- (NSString*)ccAddrAddress:(int)ccAddrIndex;

- (NSString*)ccAddrDisplayName:(int)ccAddrIndex;

- (NSString*)ccAddrGroupName:(int)ccAddrIndex;

Default Value

Remarks

The CC field contains the addresses of secondary recipients of the message.

DecryptionCertificate Property (MailReader Module)

The certificate to be used for decryption.

Syntax

Swift
Objective-C

public var decryptionCertificate: Certificate {
  get {...}
  set {...}
}


@property (nonatomic,readonly,assign,getter=decryptionCertBytes) NSData* decryptionCertBytes;

- (NSData*)decryptionCertBytes;

@property (nonatomic,readwrite,assign,getter=decryptionCertCA,setter=setDecryptionCertCA:) BOOL decryptionCertCA;

- (BOOL)decryptionCertCA;
- (void)setDecryptionCertCA :(BOOL)newDecryptionCertCA;

@property (nonatomic,readonly,assign,getter=decryptionCertCAKeyID) NSData* decryptionCertCAKeyID;

- (NSData*)decryptionCertCAKeyID;

@property (nonatomic,readonly,assign,getter=decryptionCertCertType) int decryptionCertCertType;

- (int)decryptionCertCertType;

@property (nonatomic,readwrite,assign,getter=decryptionCertCRLDistributionPoints,setter=setDecryptionCertCRLDistributionPoints:) NSString* decryptionCertCRLDistributionPoints;

- (NSString*)decryptionCertCRLDistributionPoints;
- (void)setDecryptionCertCRLDistributionPoints :(NSString*)newDecryptionCertCRLDistributionPoints;

@property (nonatomic,readwrite,assign,getter=decryptionCertCurve,setter=setDecryptionCertCurve:) NSString* decryptionCertCurve;

- (NSString*)decryptionCertCurve;
- (void)setDecryptionCertCurve :(NSString*)newDecryptionCertCurve;

@property (nonatomic,readonly,assign,getter=decryptionCertFingerprint) NSString* decryptionCertFingerprint;

- (NSString*)decryptionCertFingerprint;

@property (nonatomic,readonly,assign,getter=decryptionCertFriendlyName) NSString* decryptionCertFriendlyName;

- (NSString*)decryptionCertFriendlyName;

@property (nonatomic,readwrite,assign,getter=decryptionCertHandle,setter=setDecryptionCertHandle:) long long decryptionCertHandle;

- (long long)decryptionCertHandle;
- (void)setDecryptionCertHandle :(long long)newDecryptionCertHandle;

@property (nonatomic,readwrite,assign,getter=decryptionCertHashAlgorithm,setter=setDecryptionCertHashAlgorithm:) NSString* decryptionCertHashAlgorithm;

- (NSString*)decryptionCertHashAlgorithm;
- (void)setDecryptionCertHashAlgorithm :(NSString*)newDecryptionCertHashAlgorithm;

@property (nonatomic,readonly,assign,getter=decryptionCertIssuer) NSString* decryptionCertIssuer;

- (NSString*)decryptionCertIssuer;

@property (nonatomic,readwrite,assign,getter=decryptionCertIssuerRDN,setter=setDecryptionCertIssuerRDN:) NSString* decryptionCertIssuerRDN;

- (NSString*)decryptionCertIssuerRDN;
- (void)setDecryptionCertIssuerRDN :(NSString*)newDecryptionCertIssuerRDN;

@property (nonatomic,readwrite,assign,getter=decryptionCertKeyAlgorithm,setter=setDecryptionCertKeyAlgorithm:) NSString* decryptionCertKeyAlgorithm;

- (NSString*)decryptionCertKeyAlgorithm;
- (void)setDecryptionCertKeyAlgorithm :(NSString*)newDecryptionCertKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=decryptionCertKeyBits) int decryptionCertKeyBits;

- (int)decryptionCertKeyBits;

@property (nonatomic,readonly,assign,getter=decryptionCertKeyFingerprint) NSString* decryptionCertKeyFingerprint;

- (NSString*)decryptionCertKeyFingerprint;

@property (nonatomic,readwrite,assign,getter=decryptionCertKeyUsage,setter=setDecryptionCertKeyUsage:) int decryptionCertKeyUsage;

- (int)decryptionCertKeyUsage;
- (void)setDecryptionCertKeyUsage :(int)newDecryptionCertKeyUsage;

@property (nonatomic,readonly,assign,getter=decryptionCertKeyValid) BOOL decryptionCertKeyValid;

- (BOOL)decryptionCertKeyValid;

@property (nonatomic,readwrite,assign,getter=decryptionCertOCSPLocations,setter=setDecryptionCertOCSPLocations:) NSString* decryptionCertOCSPLocations;

- (NSString*)decryptionCertOCSPLocations;
- (void)setDecryptionCertOCSPLocations :(NSString*)newDecryptionCertOCSPLocations;

@property (nonatomic,readwrite,assign,getter=decryptionCertOCSPNoCheck,setter=setDecryptionCertOCSPNoCheck:) BOOL decryptionCertOCSPNoCheck;

- (BOOL)decryptionCertOCSPNoCheck;
- (void)setDecryptionCertOCSPNoCheck :(BOOL)newDecryptionCertOCSPNoCheck;

@property (nonatomic,readonly,assign,getter=decryptionCertOrigin) int decryptionCertOrigin;

- (int)decryptionCertOrigin;

@property (nonatomic,readwrite,assign,getter=decryptionCertPolicyIDs,setter=setDecryptionCertPolicyIDs:) NSString* decryptionCertPolicyIDs;

- (NSString*)decryptionCertPolicyIDs;
- (void)setDecryptionCertPolicyIDs :(NSString*)newDecryptionCertPolicyIDs;

@property (nonatomic,readonly,assign,getter=decryptionCertPrivateKeyBytes) NSData* decryptionCertPrivateKeyBytes;

- (NSData*)decryptionCertPrivateKeyBytes;

@property (nonatomic,readonly,assign,getter=decryptionCertPrivateKeyExists) BOOL decryptionCertPrivateKeyExists;

- (BOOL)decryptionCertPrivateKeyExists;

@property (nonatomic,readonly,assign,getter=decryptionCertPrivateKeyExtractable) BOOL decryptionCertPrivateKeyExtractable;

- (BOOL)decryptionCertPrivateKeyExtractable;

@property (nonatomic,readonly,assign,getter=decryptionCertPublicKeyBytes) NSData* decryptionCertPublicKeyBytes;

- (NSData*)decryptionCertPublicKeyBytes;

@property (nonatomic,readonly,assign,getter=decryptionCertQualified) BOOL decryptionCertQualified;

- (BOOL)decryptionCertQualified;

@property (nonatomic,readwrite,assign,getter=decryptionCertQualifiedStatements,setter=setDecryptionCertQualifiedStatements:) int decryptionCertQualifiedStatements;

- (int)decryptionCertQualifiedStatements;
- (void)setDecryptionCertQualifiedStatements :(int)newDecryptionCertQualifiedStatements;

@property (nonatomic,readonly,assign,getter=decryptionCertQualifiers) NSString* decryptionCertQualifiers;

- (NSString*)decryptionCertQualifiers;

@property (nonatomic,readonly,assign,getter=decryptionCertSelfSigned) BOOL decryptionCertSelfSigned;

- (BOOL)decryptionCertSelfSigned;

@property (nonatomic,readwrite,assign,getter=decryptionCertSerialNumber,setter=setDecryptionCertSerialNumber:) NSData* decryptionCertSerialNumber;

- (NSData*)decryptionCertSerialNumber;
- (void)setDecryptionCertSerialNumber :(NSData*)newDecryptionCertSerialNumber;

@property (nonatomic,readonly,assign,getter=decryptionCertSigAlgorithm) NSString* decryptionCertSigAlgorithm;

- (NSString*)decryptionCertSigAlgorithm;

@property (nonatomic,readonly,assign,getter=decryptionCertSource) int decryptionCertSource;

- (int)decryptionCertSource;

@property (nonatomic,readonly,assign,getter=decryptionCertSubject) NSString* decryptionCertSubject;

- (NSString*)decryptionCertSubject;

@property (nonatomic,readwrite,assign,getter=decryptionCertSubjectAlternativeName,setter=setDecryptionCertSubjectAlternativeName:) NSString* decryptionCertSubjectAlternativeName;

- (NSString*)decryptionCertSubjectAlternativeName;
- (void)setDecryptionCertSubjectAlternativeName :(NSString*)newDecryptionCertSubjectAlternativeName;

@property (nonatomic,readwrite,assign,getter=decryptionCertSubjectKeyID,setter=setDecryptionCertSubjectKeyID:) NSData* decryptionCertSubjectKeyID;

- (NSData*)decryptionCertSubjectKeyID;
- (void)setDecryptionCertSubjectKeyID :(NSData*)newDecryptionCertSubjectKeyID;

@property (nonatomic,readwrite,assign,getter=decryptionCertSubjectRDN,setter=setDecryptionCertSubjectRDN:) NSString* decryptionCertSubjectRDN;

- (NSString*)decryptionCertSubjectRDN;
- (void)setDecryptionCertSubjectRDN :(NSString*)newDecryptionCertSubjectRDN;

@property (nonatomic,readonly,assign,getter=decryptionCertValid) BOOL decryptionCertValid;

- (BOOL)decryptionCertValid;

@property (nonatomic,readwrite,assign,getter=decryptionCertValidFrom,setter=setDecryptionCertValidFrom:) NSString* decryptionCertValidFrom;

- (NSString*)decryptionCertValidFrom;
- (void)setDecryptionCertValidFrom :(NSString*)newDecryptionCertValidFrom;

@property (nonatomic,readwrite,assign,getter=decryptionCertValidTo,setter=setDecryptionCertValidTo:) NSString* decryptionCertValidTo;

- (NSString*)decryptionCertValidTo;
- (void)setDecryptionCertValidTo :(NSString*)newDecryptionCertValidTo;

Default Value

Remarks

Use this property to provide the decryption certificate. The decryption certificate must have a private key associated with it.

ExternalCrypto Property (MailReader Module)

Provides access to external signing and DC parameters.

Syntax

Swift
Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

Default Value

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

FIPSMode Property (MailReader Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

From Property (MailReader Module)

Contains the value of the From header of the Message.

Syntax

Swift
Objective-C

public var from: Array<MailAddress> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=fromAddrCount) int fromAddrCount;

- (int)fromAddrCount;

- (NSString*)fromAddrAddress:(int)fromAddrIndex;

- (NSString*)fromAddrDisplayName:(int)fromAddrIndex;

- (NSString*)fromAddrGroupName:(int)fromAddrIndex;

Default Value

Remarks

This field contains address(es) of message author(s). If the actual sender is not the author of the message, the sender is provided separately via Sender property.

IgnoreChainValidationErrors Property (MailReader Module)

Makes the module tolerant to chain validation errors.

Syntax

Swift
Objective-C

public var ignoreChainValidationErrors: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=ignoreChainValidationErrors,setter=setIgnoreChainValidationErrors:) BOOL ignoreChainValidationErrors;

- (BOOL)ignoreChainValidationErrors;
- (void)setIgnoreChainValidationErrors :(BOOL)newIgnoreChainValidationErrors;

Default Value

False

Remarks

If this property is set to True, any errors emerging during certificate chain validation will be ignored. This setting may be handy if the purpose of validation is the creation of an LTV signature, and the validation is performed in an environment that doesn't trust the signer's certificate chain.

KnownCertificates Property (MailReader Module)

Additional certificates for chain validation.

Syntax

Swift
Objective-C

public var knownCertificates: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=knownCertCount,setter=setKnownCertCount:) int knownCertCount;

- (int)knownCertCount;
- (void)setKnownCertCount :(int)newKnownCertCount;

- (NSData*)knownCertBytes:(int)knownCertIndex;

- (long long)knownCertHandle:(int)knownCertIndex;
- (void)setKnownCertHandle:(int)knownCertIndex :(long long)newKnownCertHandle;

Default Value

Remarks

Use this property to supply a list of additional certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when intermediary CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the class manually.

The purpose of the certificates to be added to this collection is roughly equivalent to that of the Intermediate Certification Authorities system store in Windows.

Do not add trust anchors or root certificates to this collection: add them to TrustedCertificates instead.

KnownCRLs Property (MailReader Module)

Additional CRLs for chain validation.

Syntax

Swift
Objective-C

public var knownCRLs: Array<CRL> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=knownCRLCount,setter=setKnownCRLCount:) int knownCRLCount;

- (int)knownCRLCount;
- (void)setKnownCRLCount :(int)newKnownCRLCount;

- (NSData*)knownCRLBytes:(int)knownCRLIndex;

- (long long)knownCRLHandle:(int)knownCRLIndex;
- (void)setKnownCRLHandle:(int)knownCRLIndex :(long long)newKnownCRLHandle;

Default Value

Remarks

Use this property to supply additional CRLs that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated CRLs are stored separately from the signed message or document.

KnownOCSPs Property (MailReader Module)

Additional OCSP responses for chain validation.

Syntax

Swift
Objective-C

public var knownOCSPs: Array<OCSPResponse> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=knownOCSPCount,setter=setKnownOCSPCount:) int knownOCSPCount;

- (int)knownOCSPCount;
- (void)setKnownOCSPCount :(int)newKnownOCSPCount;

- (NSData*)knownOCSPBytes:(int)knownOCSPIndex;

- (long long)knownOCSPHandle:(int)knownOCSPIndex;
- (void)setKnownOCSPHandle:(int)knownOCSPIndex :(long long)newKnownOCSPHandle;

Default Value

Remarks

Use this property to supply additional OCSP responses that might be needed for chain validation. This property may be helpful when a chain is validated in offline mode, and the associated OCSP responses are stored separately from the signed message or document.

Message Property (MailReader Module)

The message that is currently stored in the module.

Syntax

Swift
Objective-C

public var message: MailMessage {
  get {...}
  set {...}
}


@property (nonatomic,readonly,assign,getter=msgAttachmentCount) int msgAttachmentCount;

- (int)msgAttachmentCount;

@property (nonatomic,readwrite,assign,getter=msgBcc,setter=setMsgBcc:) NSString* msgBcc;

- (NSString*)msgBcc;
- (void)setMsgBcc :(NSString*)newMsgBcc;

@property (nonatomic,readwrite,assign,getter=msgCc,setter=setMsgCc:) NSString* msgCc;

- (NSString*)msgCc;
- (void)setMsgCc :(NSString*)newMsgCc;

@property (nonatomic,readwrite,assign,getter=msgComments,setter=setMsgComments:) NSString* msgComments;

- (NSString*)msgComments;
- (void)setMsgComments :(NSString*)newMsgComments;

@property (nonatomic,readwrite,assign,getter=msgDate,setter=setMsgDate:) NSString* msgDate;

- (NSString*)msgDate;
- (void)setMsgDate :(NSString*)newMsgDate;

@property (nonatomic,readwrite,assign,getter=msgDeliveryReceipt,setter=setMsgDeliveryReceipt:) BOOL msgDeliveryReceipt;

- (BOOL)msgDeliveryReceipt;
- (void)setMsgDeliveryReceipt :(BOOL)newMsgDeliveryReceipt;

@property (nonatomic,readwrite,assign,getter=msgFrom,setter=setMsgFrom:) NSString* msgFrom;

- (NSString*)msgFrom;
- (void)setMsgFrom :(NSString*)newMsgFrom;

@property (nonatomic,readwrite,assign,getter=msgHandle,setter=setMsgHandle:) long long msgHandle;

- (long long)msgHandle;
- (void)setMsgHandle :(long long)newMsgHandle;

@property (nonatomic,readwrite,assign,getter=msgHtmlText,setter=setMsgHtmlText:) NSString* msgHtmlText;

- (NSString*)msgHtmlText;
- (void)setMsgHtmlText :(NSString*)newMsgHtmlText;

@property (nonatomic,readwrite,assign,getter=msgID,setter=setMsgID:) NSString* msgID;

- (NSString*)msgID;
- (void)setMsgID :(NSString*)newMsgID;

@property (nonatomic,readwrite,assign,getter=msgInReplyTo,setter=setMsgInReplyTo:) NSString* msgInReplyTo;

- (NSString*)msgInReplyTo;
- (void)setMsgInReplyTo :(NSString*)newMsgInReplyTo;

@property (nonatomic,readwrite,assign,getter=msgKeywords,setter=setMsgKeywords:) NSString* msgKeywords;

- (NSString*)msgKeywords;
- (void)setMsgKeywords :(NSString*)newMsgKeywords;

@property (nonatomic,readonly,assign,getter=msgMailer) NSString* msgMailer;

- (NSString*)msgMailer;

@property (nonatomic,readwrite,assign,getter=msgPlainText,setter=setMsgPlainText:) NSString* msgPlainText;

- (NSString*)msgPlainText;
- (void)setMsgPlainText :(NSString*)newMsgPlainText;

@property (nonatomic,readwrite,assign,getter=msgPriority,setter=setMsgPriority:) int msgPriority;

- (int)msgPriority;
- (void)setMsgPriority :(int)newMsgPriority;

@property (nonatomic,readwrite,assign,getter=msgReadReceipt,setter=setMsgReadReceipt:) BOOL msgReadReceipt;

- (BOOL)msgReadReceipt;
- (void)setMsgReadReceipt :(BOOL)newMsgReadReceipt;

@property (nonatomic,readwrite,assign,getter=msgReferences,setter=setMsgReferences:) NSString* msgReferences;

- (NSString*)msgReferences;
- (void)setMsgReferences :(NSString*)newMsgReferences;

@property (nonatomic,readwrite,assign,getter=msgReplyTo,setter=setMsgReplyTo:) NSString* msgReplyTo;

- (NSString*)msgReplyTo;
- (void)setMsgReplyTo :(NSString*)newMsgReplyTo;

@property (nonatomic,readwrite,assign,getter=msgReturnPath,setter=setMsgReturnPath:) NSString* msgReturnPath;

- (NSString*)msgReturnPath;
- (void)setMsgReturnPath :(NSString*)newMsgReturnPath;

@property (nonatomic,readwrite,assign,getter=msgSender,setter=setMsgSender:) NSString* msgSender;

- (NSString*)msgSender;
- (void)setMsgSender :(NSString*)newMsgSender;

@property (nonatomic,readwrite,assign,getter=msgSendTo,setter=setMsgSendTo:) NSString* msgSendTo;

- (NSString*)msgSendTo;
- (void)setMsgSendTo :(NSString*)newMsgSendTo;

@property (nonatomic,readwrite,assign,getter=msgSubject,setter=setMsgSubject:) NSString* msgSubject;

- (NSString*)msgSubject;
- (void)setMsgSubject :(NSString*)newMsgSubject;

Default Value

Remarks

Use this property to access the message that has been processed and populated by class.

OfflineMode Property (MailReader Module)

Switches the module to offline mode.

Syntax

Swift
Objective-C

public var offlineMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=offlineMode,setter=setOfflineMode:) BOOL offlineMode;

- (BOOL)offlineMode;
- (void)setOfflineMode :(BOOL)newOfflineMode;

Default Value

False

Remarks

When working in offline mode, the class restricts itself from using any online revocation information sources, such as CRL or OCSP responders.

Offline mode may be useful if there is a need to verify the completeness of the validation information included within the signature or provided via KnownCertificates, KnownCRLs, and other related properties.

OtherHeaders Property (MailReader Module)

Contains secondary headers of the mail message.

Syntax

Swift
Objective-C

public var otherHeaders: Array<StringNameValuePair> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=headerFieldCount) int headerFieldCount;

- (int)headerFieldCount;

- (NSString*)headerFieldCategory:(int)headerFieldIndex;

- (int)headerFieldFormat:(int)headerFieldIndex;

- (NSString*)headerFieldName:(int)headerFieldIndex;

- (NSString*)headerFieldValue:(int)headerFieldIndex;

Default Value

Remarks

Use this property to access the headers that have not been published in first-level object's properties.

Profile Property (MailReader Module)

Specifies a pre-defined profile to apply when creating the signature.

Syntax

Swift
Objective-C

public var profile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=profile,setter=setProfile:) NSString* profile;

- (NSString*)profile;
- (void)setProfile :(NSString*)newProfile;

Default Value

Remarks

Advanced signatures come in many variants, which are often defined by parties that needs to process them or by local standards. SecureBlackbox profiles are sets of pre-defined configurations which correspond to particular signature variants. By specifying a profile, you are pre-configuring the component to make it produce the signature that matches the configuration corresponding to that profile.

Proxy Property (MailReader Module)

The proxy server settings.

Syntax

Swift
Objective-C

public var proxy: ProxySettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress;

- (NSString*)proxyAddress;
- (void)setProxyAddress :(NSString*)newProxyAddress;

@property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication;

- (int)proxyAuthentication;
- (void)setProxyAuthentication :(int)newProxyAuthentication;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType;

- (int)proxyProxyType;
- (void)setProxyProxyType :(int)newProxyProxyType;

@property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders;

- (NSString*)proxyRequestHeaders;
- (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders;

@property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody;

- (NSString*)proxyResponseBody;
- (void)setProxyResponseBody :(NSString*)newProxyResponseBody;

@property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders;

- (NSString*)proxyResponseHeaders;
- (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders;

@property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6;

- (BOOL)proxyUseIPv6;
- (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6;

@property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername;

- (NSString*)proxyUsername;
- (void)setProxyUsername :(NSString*)newProxyUsername;

Default Value

Remarks

Use this property to tune up the proxy server settings.

ReplyTo Property (MailReader Module)

The value of the Reply-To header field of the Message.

Syntax

Swift
Objective-C

public var replyTo: Array<MailAddress> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=replyToAddrCount) int replyToAddrCount;

- (int)replyToAddrCount;

- (NSString*)replyToAddrAddress:(int)replyToAddrIndex;

- (NSString*)replyToAddrDisplayName:(int)replyToAddrIndex;

- (NSString*)replyToAddrGroupName:(int)replyToAddrIndex;

Default Value

Remarks

This field contains the addresses to which the replies to this message should be sent. This field is optional. If not specified, the replies should be sent to the addresses specified in the From field.

RevocationCheck Property (MailReader Module)

Specifies the kind(s) of revocation check to perform for all chain certificates.

Syntax

Swift
Objective-C

public var revocationCheck: MailReaderRevocationChecks {
  get {...}
  set {...}
}

public enum MailReaderRevocationChecks: Int32 {
  case crcNone = 0
  case crcAuto = 1
  case crcAllCRL = 2
  case crcAllOCSP = 3
  case crcAllCRLAndOCSP = 4
  case crcAnyCRL = 5
  case crcAnyOCSP = 6
  case crcAnyCRLOrOCSP = 7
  case crcAnyOCSPOrCRL = 8
}


@property (nonatomic,readwrite,assign,getter=revocationCheck,setter=setRevocationCheck:) int revocationCheck;

- (int)revocationCheck;
- (void)setRevocationCheck :(int)newRevocationCheck;

Default Value

Remarks

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol (OCSP) responses serve the same purpose of ensuring that the certificate had not been revoked by the Certificate Authority (CA) at the time of use. Depending on your circumstances and security policy requirements, you may want to use either one or both of the revocation information source types.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

SecurityInfo Property (MailReader Module)

Contains the Message's security info.

Syntax

Swift
Objective-C

public var securityInfo: MailSecurityInfo {
  get {...}
}


@property (nonatomic,readonly,assign,getter=secInfoChainValidationDetails) int secInfoChainValidationDetails;

- (int)secInfoChainValidationDetails;

@property (nonatomic,readonly,assign,getter=secInfoChainValidationResult) int secInfoChainValidationResult;

- (int)secInfoChainValidationResult;

@property (nonatomic,readonly,assign,getter=secInfoClaimedSigningTime) NSString* secInfoClaimedSigningTime;

- (NSString*)secInfoClaimedSigningTime;

@property (nonatomic,readonly,assign,getter=secInfoEncrypted) BOOL secInfoEncrypted;

- (BOOL)secInfoEncrypted;

@property (nonatomic,readonly,assign,getter=secInfoEncryptionAlgorithm) NSString* secInfoEncryptionAlgorithm;

- (NSString*)secInfoEncryptionAlgorithm;

@property (nonatomic,readonly,assign,getter=secInfoHashAlgorithm) NSString* secInfoHashAlgorithm;

- (NSString*)secInfoHashAlgorithm;

@property (nonatomic,readonly,assign,getter=secInfoSignatureValidationResult) int secInfoSignatureValidationResult;

- (int)secInfoSignatureValidationResult;

@property (nonatomic,readonly,assign,getter=secInfoSigned) BOOL secInfoSigned;

- (BOOL)secInfoSigned;

@property (nonatomic,readonly,assign,getter=secInfoValidationLog) NSString* secInfoValidationLog;

- (NSString*)secInfoValidationLog;

Default Value

Remarks

Use this property to check the security information about the Message, such as whether the message is signed or the encryption algorithm used.

Sender Property (MailReader Module)

The value of the Sender header field of the Message.

Syntax

Swift
Objective-C

public var sender: MailAddress {
  get {...}
}


@property (nonatomic,readonly,assign,getter=senderAddrAddress) NSString* senderAddrAddress;

- (NSString*)senderAddrAddress;

@property (nonatomic,readonly,assign,getter=senderAddrDisplayName) NSString* senderAddrDisplayName;

- (NSString*)senderAddrDisplayName;

@property (nonatomic,readonly,assign,getter=senderAddrGroupName) NSString* senderAddrGroupName;

- (NSString*)senderAddrGroupName;

Default Value

Remarks

This field specifies the mailbox of the agent responsible for the actual transmission of this message.

If the originator of the message can be indicated by a single mailbox and both the author and the transmitter are the same entity, the "Sender:" field is not used ("From:" used instead).

SendTo Property (MailReader Module)

The value of the To header field of the Message.

Syntax

Swift
Objective-C

public var sendTo: Array<MailAddress> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=sendToAddrCount) int sendToAddrCount;

- (int)sendToAddrCount;

- (NSString*)sendToAddrAddress:(int)sendToAddrIndex;

- (NSString*)sendToAddrDisplayName:(int)sendToAddrIndex;

- (NSString*)sendToAddrGroupName:(int)sendToAddrIndex;

Default Value

Remarks

This field specifies the address(es) of the primary recipient(s) of the message.

SigningCertificate Property (MailReader Module)

The certificate of the signature creator.

Syntax

Swift
Objective-C

public var signingCertificate: Certificate {
  get {...}
}


@property (nonatomic,readonly,assign,getter=signingCertBytes) NSData* signingCertBytes;

- (NSData*)signingCertBytes;

@property (nonatomic,readonly,assign,getter=signingCertCA) BOOL signingCertCA;

- (BOOL)signingCertCA;

@property (nonatomic,readonly,assign,getter=signingCertCAKeyID) NSData* signingCertCAKeyID;

- (NSData*)signingCertCAKeyID;

@property (nonatomic,readonly,assign,getter=signingCertCRLDistributionPoints) NSString* signingCertCRLDistributionPoints;

- (NSString*)signingCertCRLDistributionPoints;

@property (nonatomic,readonly,assign,getter=signingCertCurve) NSString* signingCertCurve;

- (NSString*)signingCertCurve;

@property (nonatomic,readonly,assign,getter=signingCertFingerprint) NSString* signingCertFingerprint;

- (NSString*)signingCertFingerprint;

@property (nonatomic,readonly,assign,getter=signingCertFriendlyName) NSString* signingCertFriendlyName;

- (NSString*)signingCertFriendlyName;

@property (nonatomic,readonly,assign,getter=signingCertHandle) long long signingCertHandle;

- (long long)signingCertHandle;

@property (nonatomic,readonly,assign,getter=signingCertHashAlgorithm) NSString* signingCertHashAlgorithm;

- (NSString*)signingCertHashAlgorithm;

@property (nonatomic,readonly,assign,getter=signingCertIssuer) NSString* signingCertIssuer;

- (NSString*)signingCertIssuer;

@property (nonatomic,readonly,assign,getter=signingCertIssuerRDN) NSString* signingCertIssuerRDN;

- (NSString*)signingCertIssuerRDN;

@property (nonatomic,readonly,assign,getter=signingCertKeyAlgorithm) NSString* signingCertKeyAlgorithm;

- (NSString*)signingCertKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=signingCertKeyBits) int signingCertKeyBits;

- (int)signingCertKeyBits;

@property (nonatomic,readonly,assign,getter=signingCertKeyFingerprint) NSString* signingCertKeyFingerprint;

- (NSString*)signingCertKeyFingerprint;

@property (nonatomic,readonly,assign,getter=signingCertKeyUsage) int signingCertKeyUsage;

- (int)signingCertKeyUsage;

@property (nonatomic,readonly,assign,getter=signingCertKeyValid) BOOL signingCertKeyValid;

- (BOOL)signingCertKeyValid;

@property (nonatomic,readonly,assign,getter=signingCertOCSPLocations) NSString* signingCertOCSPLocations;

- (NSString*)signingCertOCSPLocations;

@property (nonatomic,readonly,assign,getter=signingCertPolicyIDs) NSString* signingCertPolicyIDs;

- (NSString*)signingCertPolicyIDs;

@property (nonatomic,readonly,assign,getter=signingCertPublicKeyBytes) NSData* signingCertPublicKeyBytes;

- (NSData*)signingCertPublicKeyBytes;

@property (nonatomic,readonly,assign,getter=signingCertSelfSigned) BOOL signingCertSelfSigned;

- (BOOL)signingCertSelfSigned;

@property (nonatomic,readonly,assign,getter=signingCertSerialNumber) NSData* signingCertSerialNumber;

- (NSData*)signingCertSerialNumber;

@property (nonatomic,readonly,assign,getter=signingCertSigAlgorithm) NSString* signingCertSigAlgorithm;

- (NSString*)signingCertSigAlgorithm;

@property (nonatomic,readonly,assign,getter=signingCertSubject) NSString* signingCertSubject;

- (NSString*)signingCertSubject;

@property (nonatomic,readonly,assign,getter=signingCertSubjectKeyID) NSData* signingCertSubjectKeyID;

- (NSData*)signingCertSubjectKeyID;

@property (nonatomic,readonly,assign,getter=signingCertSubjectRDN) NSString* signingCertSubjectRDN;

- (NSString*)signingCertSubjectRDN;

@property (nonatomic,readonly,assign,getter=signingCertValidFrom) NSString* signingCertValidFrom;

- (NSString*)signingCertValidFrom;

@property (nonatomic,readonly,assign,getter=signingCertValidTo) NSString* signingCertValidTo;

- (NSString*)signingCertValidTo;

Default Value

Remarks

Use this property to access the certificate that was used to create the signature.

SocketSettings Property (MailReader Module)

Manages network connection settings.

Syntax

Swift
Objective-C

public var socketSettings: SocketSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode;

- (int)socketDNSMode;
- (void)setSocketDNSMode :(int)newSocketDNSMode;

@property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort;

- (int)socketDNSPort;
- (void)setSocketDNSPort :(int)newSocketDNSPort;

@property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout;

- (int)socketDNSQueryTimeout;
- (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout;

@property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers;

- (NSString*)socketDNSServers;
- (void)setSocketDNSServers :(NSString*)newSocketDNSServers;

@property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout;

- (int)socketDNSTotalTimeout;
- (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout;

@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

Default Value

Remarks

Use this property to tune up network connection parameters.

TLSSettings Property (MailReader Module)

Manages TLS layer settings.

Syntax

Swift
Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSClientAuth,setter=setTLSClientAuth:) int TLSClientAuth;

- (int)TLSClientAuth;
- (void)setTLSClientAuth :(int)newTLSClientAuth;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

Default Value

Remarks

Use this property to tune up the TLS layer parameters.

TrustedCertificates Property (MailReader Module)

A list of trusted certificates for chain validation.

Syntax

Swift
Objective-C

public var trustedCertificates: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=trustedCertCount,setter=setTrustedCertCount:) int trustedCertCount;

- (int)trustedCertCount;
- (void)setTrustedCertCount :(int)newTrustedCertCount;

- (NSData*)trustedCertBytes:(int)trustedCertIndex;

- (long long)trustedCertHandle:(int)trustedCertIndex;
- (void)setTrustedCertHandle:(int)trustedCertIndex :(long long)newTrustedCertHandle;

Default Value

Remarks

Use this property to supply a list of trusted certificates that might be needed for chain validation. An example of a scenario where you might want to do that is when root CA certificates are absent from the standard system locations (or when there are no standard system locations), and therefore should be supplied to the component manually.

The purpose of this certificate collection is largely the same as that of the Windows Trusted Root Certification Authorities system store.

Use this property with extreme care as it directly affects chain verifiability; a wrong certificate added to the trusted list may result in bad chains being accepted, and forfeited signatures being recognized as genuine. Only add certificates that originate from the parties that you know and trust.

UsedCertificates Property (MailReader Module)

Contains a list of certificates used during the chain validation routine.

Syntax

Swift
Objective-C

public var usedCertificates: Array<Certificate> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=usedCertCount) int usedCertCount;

- (int)usedCertCount;

- (NSData*)usedCertBytes:(int)usedCertIndex;

- (BOOL)usedCertCA:(int)usedCertIndex;

- (NSData*)usedCertCAKeyID:(int)usedCertIndex;

- (int)usedCertCertType:(int)usedCertIndex;

- (NSString*)usedCertCRLDistributionPoints:(int)usedCertIndex;

- (NSString*)usedCertCurve:(int)usedCertIndex;

- (NSString*)usedCertFingerprint:(int)usedCertIndex;

- (NSString*)usedCertFriendlyName:(int)usedCertIndex;

- (long long)usedCertHandle:(int)usedCertIndex;

- (NSString*)usedCertHashAlgorithm:(int)usedCertIndex;

- (NSString*)usedCertIssuer:(int)usedCertIndex;

- (NSString*)usedCertIssuerRDN:(int)usedCertIndex;

- (NSString*)usedCertKeyAlgorithm:(int)usedCertIndex;

- (int)usedCertKeyBits:(int)usedCertIndex;

- (NSString*)usedCertKeyFingerprint:(int)usedCertIndex;

- (int)usedCertKeyUsage:(int)usedCertIndex;

- (BOOL)usedCertKeyValid:(int)usedCertIndex;

- (NSString*)usedCertOCSPLocations:(int)usedCertIndex;

- (BOOL)usedCertOCSPNoCheck:(int)usedCertIndex;

- (int)usedCertOrigin:(int)usedCertIndex;

- (NSString*)usedCertPolicyIDs:(int)usedCertIndex;

- (NSData*)usedCertPrivateKeyBytes:(int)usedCertIndex;

- (BOOL)usedCertPrivateKeyExists:(int)usedCertIndex;

- (BOOL)usedCertPrivateKeyExtractable:(int)usedCertIndex;

- (NSData*)usedCertPublicKeyBytes:(int)usedCertIndex;

- (BOOL)usedCertQualified:(int)usedCertIndex;

- (int)usedCertQualifiedStatements:(int)usedCertIndex;

- (NSString*)usedCertQualifiers:(int)usedCertIndex;

- (BOOL)usedCertSelfSigned:(int)usedCertIndex;

- (NSData*)usedCertSerialNumber:(int)usedCertIndex;

- (NSString*)usedCertSigAlgorithm:(int)usedCertIndex;

- (int)usedCertSource:(int)usedCertIndex;

- (NSString*)usedCertSubject:(int)usedCertIndex;

- (NSString*)usedCertSubjectAlternativeName:(int)usedCertIndex;

- (NSData*)usedCertSubjectKeyID:(int)usedCertIndex;

- (NSString*)usedCertSubjectRDN:(int)usedCertIndex;

- (BOOL)usedCertValid:(int)usedCertIndex;

- (NSString*)usedCertValidFrom:(int)usedCertIndex;

- (NSString*)usedCertValidTo:(int)usedCertIndex;

Default Value

Remarks

Use this property to access the list of certificates that were used during the chain validation.

ValidationMoment Property (MailReader Module)

The time point at which signature validity is to be established.

Syntax

Swift
Objective-C

public var validationMoment: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=validationMoment,setter=setValidationMoment:) NSString* validationMoment;

- (NSString*)validationMoment;
- (void)setValidationMoment :(NSString*)newValidationMoment;

Default Value

Remarks

Use this property to specify the moment in time at which signature validity should be established. The time is in UTC. Leave the setting empty to stick to the default moment (either the signature creation time or the current time).

The validity of the same signature may differ depending on the time point chosen due to temporal changes in chain validities, revocation statuses, and timestamp times.

Config Method (MailReader Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (MailReader Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

FindAttachment Method (MailReader Module)

Looks up a Message's attachment by its ID.

Syntax

Swift
Objective-C

public func findAttachment(id: String) throws -> Int32

- (int)findAttachment:(NSString*)ID;

Remarks

Use this method to find the attachment by its ID.

LoadFromBytes Method (MailReader Module)

Loads an e-mail message from a byte array.

Syntax

Swift
Objective-C

public func loadFromBytes(messageBytes: Data) throws -> Void

- (void)loadFromBytes:(NSData*)messageBytes;

Remarks

Use this method to load a message from a byte array and process it. Once the message has been loaded, use Message to access its properties.

LoadFromFile Method (MailReader Module)

Loads an e-mail message from a file.

Syntax

Swift
Objective-C

public func loadFromFile(fileName: String) throws -> Void

- (void)loadFromFile:(NSString*)fileName;

Remarks

Use this method to load a message from a file and process it. Once the message has been loaded, use Message to access its properties.

Reset Method (MailReader Module)

Resets the component settings.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

ChainValidated Event (MailReader Module)

Reports the completion of a certificate chain validation.

Syntax

Swift
Objective-C

func onChainValidated(subjectRDN: String, validationResult: Int32, validationDetails: Int32)

- (void)onChainValidated:(NSString*)subjectRDN :(int)validationResult :(int)validationDetails;

Remarks

This event is fired when a certificate chain validation routine completes. SubjectRDN identifies the owner of the validated certificate.

ValidationResult set to 0 (zero) indicates successful chain validation.


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Any other value reports a failure, and ValidationDetails provides more details on its reasons.


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

DecryptionInfoNeeded Event (MailReader Module)

Asks the application to provide a decryption certificate.

Syntax

Swift
Objective-C

func onDecryptionInfoNeeded(issuerRDN: String, serialNumber: Data, subjectKeyID: Data)

- (void)onDecryptionInfoNeeded:(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID;

Remarks

This event is fired when the component needs a decryption certificate. Use the provided values to look up the certificate, and assign it to DecryptionCertificate property.

Note that the decryption certificate must have an associated private key.

Error Event (MailReader Module)

Reports information about errors during e-mail message loading, parsing or saving.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalDecrypt Event (MailReader Module)

Handles remote or external decryption.

Syntax

Swift
Objective-C

func onExternalDecrypt(operationId: String, algorithm: String, pars: String, encryptedData: String, data: inout String)

- (void)onExternalDecrypt:(NSString*)operationId :(NSString*)algorithm :(NSString*)pars :(NSString*)encryptedData :(NSString**)data;

Remarks

Assign a handler to this event if you need to delegate a low-level decryption operation to an external, remote, or custom decryption engine. The handler receives an encrypted value in the EncryptedData parameter, and is expected to decrypt it and place the decrypted value into the Data parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. Algorithm specifies the encryption algorithm being used, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the EncryptedData, Data, and Pars parameters. If your decryption engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the decryption.

Sample data encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

Notification Event (MailReader Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

SignatureFound Event (MailReader Module)

Signifies the start of signature validation.

Syntax

Swift
Objective-C

func onSignatureFound(issuerRDN: String, serialNumber: Data, subjectKeyID: Data, certFound: Bool, validateSignature: inout Bool, validateChain: inout Bool)

- (void)onSignatureFound:(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(BOOL)certFound :(int*)validateSignature :(int*)validateChain;

Remarks

This event tells the application that signature validation is about to start, and provides the details about the signer's certificate via its IssuerRDN, SerialNumber, and SubjectKeyID parameters. It fires for every signature located in the verified document or message.

The CertFound parameter is set to True if the class has found the needed certificate in one of the known locations, and to False otherwise, in which case you must provide it manually via the KnownCertificates property.

Signature validation consists of two independent stages: cryptographic signature validation and chain validation. Separate validation results are reported for each, with the and properties respectively.

Use the ValidateSignature and ValidateChain parameters to tell the verifier which stages to include in the validation.

SignatureValidated Event (MailReader Module)

Marks the completion of the signature validation routine.

Syntax

Swift
Objective-C

func onSignatureValidated(issuerRDN: String, serialNumber: Data, subjectKeyID: Data, validationResult: Int32)

- (void)onSignatureValidated:(NSString*)issuerRDN :(NSData*)serialNumber :(NSData*)subjectKeyID :(int)validationResult;

Remarks

This event is fired upon the completion of the signature validation routine, and reports the respective validation result.

Use the IssuerRDN, SerialNumber, and/or SubjectKeyID parameters to identify the signing certificate.

ValidationResult is set to 0 if the validation has been successful, or to a non-zero value in case of a validation failure.


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

certType
CertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

crlDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

issuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

keyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

privateKeyBytes
Data (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

qualified
Bool (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

subjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

valid
Bool (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

CRL Type

Represents a Certificate Revocation List.

Remarks

CRLs store information about revoked certificates, i.e., certificates that have been identified as invalid by their issuing certificate authority (CA) for any number of reasons.

Each CRL object lists certificates from a single CA and identifies them by their serial numbers. A CA may or may not publish a CRL, may publish several CRLs, or may publish the same CRL in multiple locations.

Unlike OCSP responses, CRLs only list certificates that have been revoked. They do not list certificates that are still valid.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw CRL data in DER format.

caKeyID
Data
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's private key, if present in the CRL.

entryCount
Int32 (read-only)
Default Value: 0

Returns the number of certificate status entries in the CRL.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

issuer
String (read-only)
Default Value: ""

The common name of the CRL issuer (CA), typically a company name.

issuerRDN
String (read-only)
Default Value: ""

A collection of information, in the form of [OID, Value] pairs, uniquely identifying the CRL issuer.

location
String (read-only)
Default Value: ""

The URL that the CRL was downloaded from.

nextUpdate
String
Default Value: ""

The planned time and date of the next version of this CRL to be published.

sigAlgorithm
String
Default Value: "0"

The public key algorithm that was used by the CA to sign this CRL.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

tbs
Data (read-only)
Default Value: ""

The to-be-signed part of the CRL (the CRL without the signature part).

thisUpdate
String
Default Value: ""

The date and time at which this version of the CRL was published.

Constructors

public init()

Creates an empty CRL object.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

AsyncDocumentID

CustomParams

Data

ExternalHashCalculation

Fields

asyncDocumentID
String
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

customParams
String
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

data
String
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

externalHashCalculation
Bool
Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

hashAlgorithm
String
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

keyID
String
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

keySecret
String
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

method
AsyncSignMethods
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

mode
ExternalCryptoModes
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

publicKeyAlgorithm
String
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

MailAddress Type

A container for an e-mail addressee.

Remarks

This object is a container for an e-mail identity record. A typical e-mail address consists of an RFC822 e-mail address (john@doe.com), a friendly name (John Doe), and a group name (Officers).

The following fields are available:

Address

DisplayName

GroupName

Fields

address
String
Default Value: ""

Contains the e-mail address in the form of john@doe.com.

displayName
String
Default Value: ""

Contains the friendly name of the user of this address, such as John Doe.

groupName
String
Default Value: ""

The name of the group this address belongs to.

Constructors

public init(address: )

Creates a new e-mail address object.

public init(displayName: , address: )

Creates a new e-mail address object from an address and a display name.

MailAttachment Type

Represents an attachment to an e-mail message.

Remarks

This object is a container for message attachments.

The following fields are available:

Fields

contentSubtype
String
Default Value: ""

Contains the content subtype of the attachment.

contentType
String
Default Value: ""

Contains the content type of the attachment.

creationDate
String
Default Value: ""

The creation date.

data
Data
Default Value: ""

The content of the attachment.

description_
String
Default Value: ""

Textual description of the attachment.

This property maps to the Content-Description e-mail header field. Although the field is optional, the ability to associate descriptive information with a given body is often desirable. One example is specifying the title of an image using this property.

fileName
String
Default Value: ""

Specifies the name of the attachment file.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

id
String
Default Value: ""

Contains the attachment's unique identifier.

modificationDate
String
Default Value: ""

Specifies the date and time of the file's last modification.

readDate
String
Default Value: ""

Specifies the file's last read date.

size
Int64
Default Value: 0

The attachment's size in bytes.

Constructors

public init(contentType: )

Creates an empty mail attachment object.

MailMessage Type

Represents an e-mail message.

Remarks

This object is a container for an e-mail message.

A message consists of a header and a body. The header, in turn, consists of several header fields. The names, syntax, and expected contents of the header fields are standardized.

The message body can contain anything you like (a message may not even have a body at all).

The following fields are available:

Fields

attachmentCount
Int32 (read-only)
Default Value: 0

Returns the number of attachments in this message.

bcc
String
Default Value: ""

The contents of the BCC header field.

The BCC header field contains the addresses of secondary recipients of the message whose addresses are not to be revealed to other recipients of the message. Mail servers remove the BCC header when processing the message and use its value for dispatching the message only.

cc
String
Default Value: ""

The value of the CC header field.

The CC field contains the addresses of secondary recipients of the message.

comments
String
Default Value: ""

Contains additional information about the message body.

date
String
Default Value: ""

The date and time when the message entered the mail delivery system.

This field contains the date and time at which the creator of the message posted the message to the mail delivery system.

The date is returned and accepted in UTC time zone.

deliveryReceipt
Bool
Default Value: False

Enables delivery notification.

from
String
Default Value: ""

Contains the value of the From header field.

This field contains the address(es) of the message author(s). If the actual sender is not the author of the message, use to specify the sender separately.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

htmlText
String
Default Value: ""

The HTML version of the message.

id
String
Default Value: ""

The contents of the Message-ID header field.

This field contains a unique identifier that refers to a particular version of this message.

inReplyTo
String
Default Value: ""

The value of the In-Reply-To header field.

A reply message should have the "In-Reply-To:" header field which may be used to identify the message (or messages) to which the new message is a reply.

keywords
String
Default Value: ""

The value of the Keywords header field.

This field can be used to add some important words and phrases that might be useful for the recipient.

mailer
String (read-only)
Default Value: ""

The name of the software that was used to send the message.

plainText
String
Default Value: ""

The plain text version of the message.

priority
MailPriorities
Default Value: 2

Specifies the message priority.

Available options:


mpLowest	`0`
mpLow	`1`
mpNormal	`2`
mpHigh	`3`
mpHighest	`4`

readReceipt
Bool
Default Value: False

Enables a read notification.

references
String
Default Value: ""

The value of the References header field.

A reply message should include a "References:" header field which may be used to identify the "conversation thread". If the initial message is a reply itself, the References of the reply contain combined content of its "References:", "InReplyTo:" and "MessageID:" fields, subject to their presence in the original message.

replyTo
String
Default Value: ""

The value of the Reply-To header field.

This field contains the addresses to which the replies to this message should be sent. This field is optional. If not specified, the replies must be sent to the addresses specified in the field.

returnPath
String
Default Value: ""

The value of the Return-Path header field.

This field contains the address to which this message shall be returned in case of unsuccessful delivery.

sender
String
Default Value: ""

The value of the Sender header field.

This field specifies the mailbox of the agent responsible for the actual transmission of this message. If the originator of the message can be indicated by a single mailbox and both the author and the transmitter are identical, the "Sender:" field is deemed excessive and should not be used.

sendTo
String
Default Value: ""

The value of the To header field.

This field specifies the address(es) of the primary recipient(s) of the message.

subject
String
Default Value: ""

Contains the subject field of this message.

Constructors

public init()

Creates a new empty mail message object.

MailSecurityInfo Type

Contains security details for the processed e-mail message.

Remarks

This object provides access to security details of an e-mail message.

The following fields are available:

ChainValidationDetails

ChainValidationResult

SignatureValidationResult

Signed

ValidationLog

Fields

chainValidationDetails
Int32 (read-only)
Default Value: 0

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

chainValidationResult
ChainValidities (read-only)
Default Value: 0

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

claimedSigningTime
String (read-only)
Default Value: ""

Returns the signature's claimed signing time.

Use this property to get the signature creation time from the signer's computer. Note that the claimed time is not covered by a trusted timestamp and may be forfeited or wrong. The time is provided in UTC.

encrypted
Bool (read-only)
Default Value: False

Indicates whether the message is encrypted.

encryptionAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used to encrypt the message.

hashAlgorithm
String (read-only)
Default Value: ""

Specifies the hash algorithm that was used to calculate the signature.

signatureValidationResult
SignatureValidities (read-only)
Default Value: 0

The outcome of the cryptographic signature validation.

The following signature validity values are supported:


svtValid	`0`	The signature is valid
svtUnknown	`1`	Signature validity is unknown
svtCorrupted	`2`	The signature is corrupted
svtSignerNotFound	`3`	Failed to acquire the signing certificate. The signature cannot be validated.
svtFailure	`4`	General failure
svtReferenceCorrupted	`5`	Reference corrupted (XML-based signatures only)

signed
Bool (read-only)
Default Value: False

Indicates whether the message is signed.

validationLog
String (read-only)
Default Value: ""

Contains the signing certificate's chain validation log. This information may be very useful in investigating chain validation failures.

Constructors

public init()

Creates a new MailSecurityInfo object.

OCSPResponse Type

Represents a single OCSP response originating from an OCSP responder.

Remarks

OCSP is a protocol that allows verification of certificate status in real-time, and is an alternative to Certificate Revocation Lists (CRLs).

An OCSP response is a snapshot of the certificate status at a given time.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

A buffer containing the raw OCSP response data.

entryCount
Int32 (read-only)
Default Value: 0

The number of SingleResponse elements contained in this OCSP response. Each SingleResponse element corresponds to a certificate status.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

issuer
String (read-only)
Default Value: ""

Indicates the issuer of this response (a CA or its authorized representative).

issuerRDN
String (read-only)
Default Value: ""

Indicates the RDN of the issuer of this response (a CA or its authorized representative).

location
String (read-only)
Default Value: ""

The location of the OCSP responder.

producedAt
String
Default Value: ""

Specifies the time when the response was produced, in UTC.

sigAlgorithm
String
Default Value: "0"

The public key algorithm that was used by the CA to sign this OCSP response.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

Constructors

public init()

Creates an empty OCSP response object.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

The following fields are available:

Fields

address
String
Default Value: ""

The IP address of the proxy server.

authentication
ProxyAuthTypes
Default Value: 0

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

password
String
Default Value: ""

The password to authenticate to the proxy server.

port
Int32
Default Value: 0

The port on the proxy server to connect to.

proxyType
ProxyTypes
Default Value: 0

The type of the proxy server.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

requestHeaders
String
Default Value: ""

Contains HTTP request headers for WebTunnel and HTTP proxy.

responseBody
String
Default Value: ""

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

responseHeaders
String
Default Value: ""

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

useIPv6
Bool
Default Value: False

Specifies whether IPv6 should be used when connecting through the proxy.

username
String
Default Value: ""

Specifies the username credential for proxy authentication.

Constructors

public init()

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

The following fields are available:

Fields

dnsMode
DNSResolveModes
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

dnsPort
Int32
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

dnsQueryTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

dnsServers
String
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

dnsTotalTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

incomingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to read from the socket, per second.

localAddress
String
Default Value: ""

The local network interface to bind the socket to.

localPort
Int32
Default Value: 0

The local port number to bind the socket to.

outgoingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to write to the socket, per second.

timeout
Int32
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

useIPv6
Bool
Default Value: False

Enables or disables IP protocol version 6.

Constructors

public init()

Creates a new SocketSettings object.

StringNameValuePair Type

A simple name-value pair object.

Remarks

The class represents a name-value string pair used in a variety of network components.

The following fields are available:

Fields

category
String
Default Value: ""

Specifies the string category of the contained value.

This property allows to check or set the category (or type) associated with the contained value. Depending on the format used to load or save the string, the category parameter may or may not be used.

For example, for ASN.1 property lists the category contains the ASN.1 tag of the contained data (OCTETSTRING, UTF8STRING, INTEGER, ...). For basic (name, value) pairs, such as HTTP headers, the category parameter is not used.

format
Int32
Default Value: 0

Specifies the format (encoding) of the value contained in the property.

Use this property to check or set the format of the contained value. Remember to provide the actual value in the appropriate format that matches this setting: utils.NameValuePairs[0].Name = "key"; utils.NameValuePairs[0].Format = svfBinary; utils.NameValuePairs[0].Name = "0a1b2c3d4e5f6071";

The following formats are currently supported:


svfText	`0`	The property contains text
svfBinary	`1`	The property contains binary data. The Value property contains a hex encoding of it.

name
String
Default Value: ""

The name element in a (name, value) pair.

value
String
Default Value: ""

The value element in a (name, value) pair.

Constructors

public init(name: , value: )

Creates a name-value pair from a name and a value.

public init()

Creates an empty name-value object.

TLSSettings Type

A container for TLS connection settings.

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

The following fields are available:

AutoValidateCertificates

ForceResumeIfDestinationChanges

PreSharedIdentity

PreSharedKey

PreSharedKeyCiphersuite

RenegotiationAttackPreventionMode

RevocationCheck

SSLOptions

TLSMode

UseExtendedMasterSecret

UseSessionResumption

Versions

Fields

autoValidateCertificates
Bool
Default Value: True

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

baseConfiguration
SecureTransportPredefinedConfigurations
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

ciphersuites
String
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by . Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

clientAuth
ClientAuthTypes
Default Value: 0

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

ecCurves
String
Default Value: ""

Defines the elliptic curves to enable.

extensions
String
Default Value: ""

Provides access to TLS extensions.

forceResumeIfDestinationChanges
Bool
Default Value: False

Whether to force TLS session resumption when the destination address changes.

preSharedIdentity
String
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedKey
String
Default Value: ""

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

preSharedKeyCiphersuite
String
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default Value: 2

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

revocationCheck
RevocationCheckKinds
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

sslOptions
Int32
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

tlsMode
SSLModes
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

useExtendedMasterSecret
Bool
Default Value: False

Enables the Extended Master Secret Extension, as defined in RFC 7627.

useSessionResumption
Bool
Default Value: False

Enables or disables the TLS session resumption capability.

versions
Int32
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

public init()

Creates a new TLSSettings object.

Config Settings (MailReader Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

MailReader Config Settings

ChainCurrentCACert: Returns the current CA certificate.

This property returns the CA certificate that is used on the current step.

ChainCurrentCert: Returns the certificate that is currently being validated.

Use this property to obtain the body of the certificate that is currently being validated.

ChainCurrentCRL: Returns the current CRL.

Returns the CRL object that is currently being processed.

ChainCurrentCRLSize: Returns the size of the current CRL.

This property returns the size of the CRL object that is currently being processed.

ChainCurrentOCSP: Returns the current OCSP response.

Returns the OCSP object that is currently being processed.

ChainCurrentOCSPSigner: Returns the signer of the current OCSP object.

Returns the signer/CA that has issued the OCSP response that is currently being processed.

ChainInterimDetails: Returns the current interim validation details.

This property returns the interim chain validation details.

ChainInterimResult: Returns the current interim validation result.

Use this setting to obtain the current (mid-chain) validation result. This property applies to the current validation step and may change as the chain walk proceeds. The final result will be published in the ChainValidationResult property once the validation process completes.

CheckValidityPeriodForTrusted: Whether to check validity period for trusted certificates.

Whether to check validity period for trusted certificates.

DislikeOpenEndedOCSPs: Tells the class to discourage OCSP responses without an explicit NextUpdate parameter.

When this property is set to True, the validation engine treats OCSP response without a NextUpdate field as 'substandard' and tries to obtain some further revocation material for the certificate in question (a different OCSP or a CRL, even if the class is configured to prefer the OCSP route). This is to work around Adobe Reader's intolerance to such OCSPs when classifying signed documents as LTV (as of August 2022).

ForceCompleteChainValidation: Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod: Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

HeaderCharset: Charset of the header. If not empty, the one specified in the message header will be ignored.

IgnoreChainLoops: Whether chain loops should be ignored.

Set this property to True to make the validation engine ignore chain loops. This may be an option when you need to process chains from buggy CAs that happen to include subchains that sign themselves.

IgnoreOCSPNoCheckExtension: Whether the OCSP NoCheck extension should be ignored.

Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows emulating the verifying environment without actually changing its security settings.

MaxHeaderSize: Specifies the maximum mail message header size in bytes.

Use this property to adjust the maximum size of a mail message header. If no header end (CRLFCRLF) found, the header is considered blank. Default size is 32768 (i.e. 32KB).

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the class to publish the 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TextCharset: Charset of text parts, if any. If not empty, the one specified in the message text parts will be ignored.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

CA, revocation source, TLS key usage requirements are not mandated
Violation of OCSP issuer requirements are ignored
The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
Basic constraints and name constraints of CA certificates are ignored
Some weaker algorithms are tolerated

UseMicrosoftCTL: Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

UseValidationCache: Enables or disable the use of the product-wide certificate chain validation cache.

Use this property to enable or disable the use of the global chain validation cache. If enabled, the class will consult the product-wide validation cache when validating the signing chains. Also, the outcomes of any new chain validations performed by the class, both interim and final, will be saved in the cache and available for re-use by any future validations. Disable this property to ignore the cache and always perform the validation from a fresh start.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (MailReader Module)

MailReader Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
22020097	Failed to assemble the mail message (`SB_ERROR_MAIL_ASSEMBLY_FAILED`)
22020098	Failed to assemble the mail message (`SB_ERROR_MAIL_PARSING_FAILED`)
22020099	No decryption certificate found (`SB_ERROR_MAIL_NO_DECRYPTION_CERTIFICATE`)