WebSocketServer Module

Properties Methods Events Config Settings Errors

The WebSocketServer module provides the server-side functionality of the WebSocket protocol.

Syntax

SecureBlackbox.WebSocketServer

Remarks

Use this component to accept secure WebSocket connections in your application.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


Active	Indicates whether the server is active and is listening to new connections.
AuthTypes	Defines allowed HTTP authentication types.
BoundPort	Indicates the bound listening port.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
HandshakeTimeout	Specifies the handshake timeout in milliseconds.
Host	The host to bind the listening port to.
PinnedClient	Populates the pinned client details.
PinnedClientChain	Contains the certificate chain of the pinned client.
Port	Specifies the port number to listen for connections on.
PortRangeFrom	Specifies the lower limit of the listening port range for incoming connections.
PortRangeTo	Specifies the upper limit of the listening port range for incoming connections.
SessionTimeout	Specifies the default session timeout value in milliseconds.
SocketSettings	Manages network connection settings.
TLSServerChain	The server's TLS certificates.
TLSSettings	Manages TLS layer settings.
Users	Provides a list of registered users.
WebsiteName	Specifies the web site name to use in the certificate.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Cleanup	Cleans up the server environment by purging expired sessions and cleaning caches.
Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
DropClient	Terminates a client connection.
ListClients	Enumerates the connected clients.
PinClient	Takes a snapshot of the connection's properties.
Reset	Resets the module settings.
SendData	Sends a piece of binary data to the client.
SendKeepAlive	Sends a keep-alive message.
SendText	Sends a piece of text data to the client.
SetResponseBytes	Sets a byte array to be served as a response.
SetResponseStatus	Sets an HTTP status to be sent with the response.
SetResponseString	Sets a string to be served as a response.
Start	Starts the server.
Stop	Stops the server.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Accept	Reports an incoming connection.
AuthAttempt	Fires when a connected client makes an authentication attempt.
BinaryData	Passes a received chunk of binary data to the application.
Connect	Reports an accepted connection.
Data	Supplies a data chunk received within a POST or PUT upload.
Disconnect	Fires to report a disconnected client.
Error	Information about errors during data delivery.
ExternalSign	Handles remote or external signing initiated by the server protocol.
GetRequest	Reports a GET request.
KeepAliveResponse	Reports a response to a keep-alive message.
Notification	This event notifies the application about an underlying control flow event.
TextData	Passes a received chunk of text data to the application.
TLSCertValidate	Fires when a client certificate needs to be validated.
TLSEstablished	Reports the setup of a TLS session.
TLSHandshake	Fires when a newly established client connection initiates a TLS handshake.
TLSPSK	Requests a pre-shared key for TLS-PSK.
TLSShutdown	Reports closure of a TLS session.
WebSocketConnect	Reports an accepted WebSocket connection.
WebSocketDisconnect	Fires to report a disconnected WebSocket client.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


AllowKeepAlive	Enables or disables keep-alive mode.
AllowOptionsResponseWithoutAuth	Enables unauthenticated responses to OPTIONS requests.
AuthBasic	Turns on/off the basic authentication.
AuthDigest	Turns on/off the digest authentication.
AuthDigestExpire	Specifies digest expiration time for digest authentication.
AuthRealm	Specifies authentication realm for digest and NTLM authentication.
BoundAddress	Returns the bound address of the listening socket.
BoundPort	The port that was bound by the server.
CompressionLevel	The default compression level to use.
DocumentRoot	The document root of the server.
DualStack	Allows the use of ip4 and ip6 simultaneously.
HandshakeTimeout	The HTTPS handshake timeout.
HomePage	Specifies the home page resource name.
Host	The host to bind to.
Port	The port to listen on.
PortRangeFrom	The lower bound of allowed port scope to listen on.
PortRangeTo	The higher bound of allowed port scope to listen on.
PreSharedIdentityHint	Gets or sets the PSK identity hint.
RequestFilter	The request string modifier.
SessionTimeout	The HTTP session timeout.
SleepLen	Adjusts the server loop idling time.
TempDir	A temporary directory to use.
TempPath	Path for storing temporary files.
TLSExtensions	TBD.
TLSPeerExtensions	TBD.
TLSServerCertIndex	Specifies the index of the server certificate to use.
UseChunkedTransfer	Enables chunked transfer.
UseCompression	Enables or disables server-side compression.
WebsiteName	The website name for the TLS certificate.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

Active Property (WebSocketServer Module)

Indicates whether the server is active and is listening to new connections.

public var active: Bool {
  get {...}
}


@property (nonatomic,readonly,assign,getter=active) BOOL active;

- (BOOL)active;

Default Value

False

Remarks

This read-only property returns True if the server is listening to incoming connections.

This property is read-only.

AuthTypes Property (WebSocketServer Module)

Defines allowed HTTP authentication types.

Syntax

Swift
Objective-C

public var authTypes: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=authTypes,setter=setAuthTypes:) int authTypes;

- (int)authTypes;
- (void)setAuthTypes :(int)newAuthTypes;

Default Value

Remarks

Use this property to define which authentication types the component should support or attempt to use by enabling the relevant bitmask flags:


haBasic	`0x01`	Basic authentication
haDigest	`0x02`	Digest authentication (RFC 2617)
haNTLM	`0x04`	Windows NTLM authentication
haKerberos	`0x08`	Kerberos (Negotiate) authentication
haOAuth2	`0x10`	OAuth2 authentication

BoundPort Property (WebSocketServer Module)

Indicates the bound listening port.

Syntax

Swift
Objective-C

public var boundPort: Int32 {
  get {...}
}


@property (nonatomic,readonly,assign,getter=boundPort) int boundPort;

- (int)boundPort;

Default Value

Remarks

Check this property to find out the port that has been allocated to the server by the system. The bound port always equals Port if it is provided, or is allocated dynamically if configured to fall in the range between PortRangeFrom and PortRangeTo constraints.

This property is read-only.

ExternalCrypto Property (WebSocketServer Module)

Provides access to external signing and DC parameters.

Syntax

Swift
Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

Default Value

"secureblackbox"

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

FIPSMode Property (WebSocketServer Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

HandshakeTimeout Property (WebSocketServer Module)

Specifies the handshake timeout in milliseconds.

Syntax

Swift
Objective-C

public var handshakeTimeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=handshakeTimeout,setter=setHandshakeTimeout:) int handshakeTimeout;

- (int)handshakeTimeout;
- (void)setHandshakeTimeout :(int)newHandshakeTimeout;

Default Value

20000

Remarks

Use this property to set the TLS handshake timeout.

Host Property (WebSocketServer Module)

The host to bind the listening port to.

Syntax

Swift
Objective-C

public var host: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=host,setter=setHost:) NSString* host;

- (NSString*)host;
- (void)setHost :(NSString*)newHost;

Default Value

Remarks

Use this property to specify the IP address on which to listen to incoming connections.

PinnedClient Property (WebSocketServer Module)

Populates the pinned client details.

Syntax

Swift
Objective-C

public var pinnedClient: TLSConnectionInfo {
  get {...}
}


@property (nonatomic,readonly,assign,getter=pinnedClientAEADCipher) BOOL pinnedClientAEADCipher;

- (BOOL)pinnedClientAEADCipher;

@property (nonatomic,readonly,assign,getter=pinnedClientChainValidationDetails) int pinnedClientChainValidationDetails;

- (int)pinnedClientChainValidationDetails;

@property (nonatomic,readonly,assign,getter=pinnedClientChainValidationResult) int pinnedClientChainValidationResult;

- (int)pinnedClientChainValidationResult;

@property (nonatomic,readonly,assign,getter=pinnedClientCiphersuite) NSString* pinnedClientCiphersuite;

- (NSString*)pinnedClientCiphersuite;

@property (nonatomic,readonly,assign,getter=pinnedClientClientAuthenticated) BOOL pinnedClientClientAuthenticated;

- (BOOL)pinnedClientClientAuthenticated;

@property (nonatomic,readonly,assign,getter=pinnedClientClientAuthRequested) BOOL pinnedClientClientAuthRequested;

- (BOOL)pinnedClientClientAuthRequested;

@property (nonatomic,readonly,assign,getter=pinnedClientConnectionEstablished) BOOL pinnedClientConnectionEstablished;

- (BOOL)pinnedClientConnectionEstablished;

@property (nonatomic,readonly,assign,getter=pinnedClientConnectionID) NSData* pinnedClientConnectionID;

- (NSData*)pinnedClientConnectionID;

@property (nonatomic,readonly,assign,getter=pinnedClientDigestAlgorithm) NSString* pinnedClientDigestAlgorithm;

- (NSString*)pinnedClientDigestAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientEncryptionAlgorithm) NSString* pinnedClientEncryptionAlgorithm;

- (NSString*)pinnedClientEncryptionAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientExportable) BOOL pinnedClientExportable;

- (BOOL)pinnedClientExportable;

@property (nonatomic,readonly,assign,getter=pinnedClientID) long long pinnedClientID;

- (long long)pinnedClientID;

@property (nonatomic,readonly,assign,getter=pinnedClientKeyExchangeAlgorithm) NSString* pinnedClientKeyExchangeAlgorithm;

- (NSString*)pinnedClientKeyExchangeAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientKeyExchangeKeyBits) int pinnedClientKeyExchangeKeyBits;

- (int)pinnedClientKeyExchangeKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientNamedECCurve) NSString* pinnedClientNamedECCurve;

- (NSString*)pinnedClientNamedECCurve;

@property (nonatomic,readonly,assign,getter=pinnedClientPFSCipher) BOOL pinnedClientPFSCipher;

- (BOOL)pinnedClientPFSCipher;

@property (nonatomic,readonly,assign,getter=pinnedClientPreSharedIdentity) NSString* pinnedClientPreSharedIdentity;

- (NSString*)pinnedClientPreSharedIdentity;

@property (nonatomic,readonly,assign,getter=pinnedClientPreSharedIdentityHint) NSString* pinnedClientPreSharedIdentityHint;

- (NSString*)pinnedClientPreSharedIdentityHint;

@property (nonatomic,readonly,assign,getter=pinnedClientPublicKeyBits) int pinnedClientPublicKeyBits;

- (int)pinnedClientPublicKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientRemoteAddress) NSString* pinnedClientRemoteAddress;

- (NSString*)pinnedClientRemoteAddress;

@property (nonatomic,readonly,assign,getter=pinnedClientRemotePort) int pinnedClientRemotePort;

- (int)pinnedClientRemotePort;

@property (nonatomic,readonly,assign,getter=pinnedClientResumedSession) BOOL pinnedClientResumedSession;

- (BOOL)pinnedClientResumedSession;

@property (nonatomic,readonly,assign,getter=pinnedClientSecureConnection) BOOL pinnedClientSecureConnection;

- (BOOL)pinnedClientSecureConnection;

@property (nonatomic,readonly,assign,getter=pinnedClientServerAuthenticated) BOOL pinnedClientServerAuthenticated;

- (BOOL)pinnedClientServerAuthenticated;

@property (nonatomic,readonly,assign,getter=pinnedClientSignatureAlgorithm) NSString* pinnedClientSignatureAlgorithm;

- (NSString*)pinnedClientSignatureAlgorithm;

@property (nonatomic,readonly,assign,getter=pinnedClientSymmetricBlockSize) int pinnedClientSymmetricBlockSize;

- (int)pinnedClientSymmetricBlockSize;

@property (nonatomic,readonly,assign,getter=pinnedClientSymmetricKeyBits) int pinnedClientSymmetricKeyBits;

- (int)pinnedClientSymmetricKeyBits;

@property (nonatomic,readonly,assign,getter=pinnedClientTotalBytesReceived) long long pinnedClientTotalBytesReceived;

- (long long)pinnedClientTotalBytesReceived;

@property (nonatomic,readonly,assign,getter=pinnedClientTotalBytesSent) long long pinnedClientTotalBytesSent;

- (long long)pinnedClientTotalBytesSent;

@property (nonatomic,readonly,assign,getter=pinnedClientValidationLog) NSString* pinnedClientValidationLog;

- (NSString*)pinnedClientValidationLog;

@property (nonatomic,readonly,assign,getter=pinnedClientVersion) NSString* pinnedClientVersion;

- (NSString*)pinnedClientVersion;

Default Value

"secureblackbox"

Remarks

Use this property to access the details of the client connection previously pinned with PinClient method.

PinnedClientChain Property (WebSocketServer Module)

Contains the certificate chain of the pinned client.

Syntax

Swift
Objective-C

public var pinnedClientChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=pinnedClientCertCount) int pinnedClientCertCount;

- (int)pinnedClientCertCount;

- (NSData*)pinnedClientCertBytes:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertCAKeyID:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertFingerprint:(int)pinnedClientCertIndex;

- (long long)pinnedClientCertHandle:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertIssuer:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertIssuerRDN:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertKeyAlgorithm:(int)pinnedClientCertIndex;

- (int)pinnedClientCertKeyBits:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertKeyFingerprint:(int)pinnedClientCertIndex;

- (int)pinnedClientCertKeyUsage:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertPublicKeyBytes:(int)pinnedClientCertIndex;

- (BOOL)pinnedClientCertSelfSigned:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertSerialNumber:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSigAlgorithm:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSubject:(int)pinnedClientCertIndex;

- (NSData*)pinnedClientCertSubjectKeyID:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertSubjectRDN:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertValidFrom:(int)pinnedClientCertIndex;

- (NSString*)pinnedClientCertValidTo:(int)pinnedClientCertIndex;

Default Value

"secureblackbox"

Remarks

Use this property to access the certificate chain of the client connection pinned previously with a PinClient call.

Port Property (WebSocketServer Module)

Specifies the port number to listen for connections on.

Syntax

Swift
Objective-C

public var port: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=port,setter=setPort:) int port;

- (int)port;
- (void)setPort :(int)newPort;

Default Value

Remarks

Use this property to specify the port number to listen to connections on. Standard port numbers are 80 for an HTTP server, and 443 for an HTTPS server.

Alternatively, you may specify the acceptable range of listening ports via PortRangeFrom and PortRangeTo properties. In this case the port will be allocated within the requested range by the operating system, and reported in BoundPort.

PortRangeFrom Property (WebSocketServer Module)

Specifies the lower limit of the listening port range for incoming connections.

Syntax

Swift
Objective-C

public var portRangeFrom: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=portRangeFrom,setter=setPortRangeFrom:) int portRangeFrom;

- (int)portRangeFrom;
- (void)setPortRangeFrom :(int)newPortRangeFrom;

Default Value

Remarks

Use this property to specify the lower limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

PortRangeTo Property (WebSocketServer Module)

Specifies the upper limit of the listening port range for incoming connections.

Syntax

Swift
Objective-C

public var portRangeTo: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=portRangeTo,setter=setPortRangeTo:) int portRangeTo;

- (int)portRangeTo;
- (void)setPortRangeTo :(int)newPortRangeTo;

Default Value

Remarks

Use this property to specify the upper limit of the port range to listen to connections on. When a port range is used to specify the listening port (as opposed to a fixed value provided via Port), the port will be allocated within the requested range by the operating system, and reported in BoundPort.

Note that this property is ignored if the Port property is set to a non-zero value, in which case the server always aims to listen on that fixed port.

SessionTimeout Property (WebSocketServer Module)

Specifies the default session timeout value in milliseconds.

Syntax

Swift
Objective-C

public var sessionTimeout: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=sessionTimeout,setter=setSessionTimeout:) int sessionTimeout;

- (int)sessionTimeout;
- (void)setSessionTimeout :(int)newSessionTimeout;

Default Value

360000

Remarks

Specifies the period of inactivity (in milliseconds) after which the connection will be terminated by the server.

SocketSettings Property (WebSocketServer Module)

Manages network connection settings.

Syntax

Swift
Objective-C

public var socketSettings: SocketSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

Default Value

"secureblackbox"

Remarks

Use this property to tune up network connection parameters.

TLSServerChain Property (WebSocketServer Module)

The server's TLS certificates.

Syntax

Swift
Objective-C

public var tlsServerChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSServerCertCount,setter=setTLSServerCertCount:) int TLSServerCertCount;

- (int)TLSServerCertCount;
- (void)setTLSServerCertCount :(int)newTLSServerCertCount;

- (NSData*)TLSServerCertBytes:(int)tLSServerCertIndex;

- (long long)TLSServerCertHandle:(int)tLSServerCertIndex;
- (void)setTLSServerCertHandle:(int)tLSServerCertIndex :(long long)newTLSServerCertHandle;

Default Value

"secureblackbox"

Remarks

Use this property to provide a list of TLS certificates for the server endpoint.

A TLS endpoint needs a certificate to be able to accept TLS connections. At least one of the certificates in the collection - the endpoint certificate - must have a private key associated with it.

The collection may include more than one endpoint certificate, and more than one chain. A typical usage scenario is to include two chains (ECDSA and RSA), to cater for clients with different cipher suite preferences.

TLSSettings Property (WebSocketServer Module)

Manages TLS layer settings.

Syntax

Swift
Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSClientAuth,setter=setTLSClientAuth:) int TLSClientAuth;

- (int)TLSClientAuth;
- (void)setTLSClientAuth :(int)newTLSClientAuth;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

Default Value

"secureblackbox"

Remarks

Use this property to tune up the TLS layer parameters.

Users Property (WebSocketServer Module)

Provides a list of registered users.

Syntax

Swift
Objective-C

public var users: Array<UserAccount> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=userCount,setter=setUserCount:) int userCount;

- (int)userCount;
- (void)setUserCount :(int)newUserCount;

- (NSData*)userAssociatedData:(int)userIndex;
- (void)setUserAssociatedData:(int)userIndex :(NSData*)newUserAssociatedData;

- (NSString*)userBasePath:(int)userIndex;
- (void)setUserBasePath:(int)userIndex :(NSString*)newUserBasePath;

- (NSString*)userData:(int)userIndex;
- (void)setUserData:(int)userIndex :(NSString*)newUserData;

- (long long)userHandle:(int)userIndex;
- (void)setUserHandle:(int)userIndex :(long long)newUserHandle;

- (NSString*)userHashAlgorithm:(int)userIndex;
- (void)setUserHashAlgorithm:(int)userIndex :(NSString*)newUserHashAlgorithm;

- (int)userIncomingSpeedLimit:(int)userIndex;
- (void)setUserIncomingSpeedLimit:(int)userIndex :(int)newUserIncomingSpeedLimit;

- (int)userOutgoingSpeedLimit:(int)userIndex;
- (void)setUserOutgoingSpeedLimit:(int)userIndex :(int)newUserOutgoingSpeedLimit;

- (NSString*)userPassword:(int)userIndex;
- (void)setUserPassword:(int)userIndex :(NSString*)newUserPassword;

- (NSData*)userSharedSecret:(int)userIndex;
- (void)setUserSharedSecret:(int)userIndex :(NSData*)newUserSharedSecret;

- (NSString*)userUsername:(int)userIndex;
- (void)setUserUsername:(int)userIndex :(NSString*)newUserUsername;

Default Value

"secureblackbox"

Remarks

Assign a list of 'known' users to this property to automate authentication handling by the class.

WebsiteName Property (WebSocketServer Module)

Specifies the web site name to use in the certificate.

Syntax

Swift
Objective-C

public var websiteName: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=websiteName,setter=setWebsiteName:) NSString* websiteName;

- (NSString*)websiteName;
- (void)setWebsiteName :(NSString*)newWebsiteName;

Default Value

"secureblackbox"

Remarks

If using an internally-generated certificate, use this property to specify the web site name to be included as a common name. A typical common name consists of the host name, such as '192.168.10.10' or 'domain.com'.

Cleanup Method (WebSocketServer Module)

Cleans up the server environment by purging expired sessions and cleaning caches.

Syntax

Swift
Objective-C

public func cleanup() throws -> Void

- (void)cleanup;

Remarks

Call this method while the server is active to clean up the environment allocated for the server by releasing unused resources and cleaning caches.

Config Method (WebSocketServer Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (WebSocketServer Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

DropClient Method (WebSocketServer Module)

Terminates a client connection.

Syntax

Swift
Objective-C

public func dropClient(connectionId: Int64, forced: Bool) throws -> Void

- (void)dropClient:(long long)connectionId :(BOOL)forced;

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

ListClients Method (WebSocketServer Module)

Enumerates the connected clients.

Syntax

Swift
Objective-C

public func listClients() throws -> String

- (NSString*)listClients;

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

PinClient Method (WebSocketServer Module)

Takes a snapshot of the connection's properties.

Syntax

Swift
Objective-C

public func pinClient(connectionId: Int64) throws -> Void

- (void)pinClient:(long long)connectionId;

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in PinnedClient and PinnedClientChain properties.

Reset Method (WebSocketServer Module)

Resets the component settings.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

SendData Method (WebSocketServer Module)

Sends a piece of binary data to the client.

Syntax

Swift
Objective-C

public func sendData(connectionID: Int64, buffer: Data) throws -> Void

- (void)sendData:(long long)connectionID :(NSData*)buffer;

Remarks

Use this method to send a piece of binary data to the client.

SendKeepAlive Method (WebSocketServer Module)

Sends a keep-alive message.

Syntax

Swift
Objective-C

public func sendKeepAlive(connectionID: Int64) throws -> Void

- (void)sendKeepAlive:(long long)connectionID;

Remarks

Use this method to send a keep-alive 'ping' to the client. The response, if it comes back, will be reported via the KeepAliveResponse event.

Keep-alive messages provide good means for keeping the connection alive and stay immune to timeouts.

SendText Method (WebSocketServer Module)

Sends a piece of text data to the client.

Syntax

Swift
Objective-C

public func sendText(connectionID: Int64, text: String) throws -> Void

- (void)sendText:(long long)connectionID :(NSString*)text;

Remarks

Use this method to send a piece of text data to the client.

SetResponseBytes Method (WebSocketServer Module)

Sets a byte array to be served as a response.

Syntax

Swift
Objective-C

public func setResponseBytes(connectionId: Int64, bytes: Data, contentType: String, responseFilter: String) throws -> Void

- (void)setResponseBytes:(long long)connectionId :(NSData*)bytes :(NSString*)contentType :(NSString*)responseFilter;

Remarks

Use this property to provide the response content in a byte array. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:


parts[Index]	The body of a particular part of a multipart response.

SetResponseStatus Method (WebSocketServer Module)

Sets an HTTP status to be sent with the response.

Syntax

Swift
Objective-C

public func setResponseStatus(connectionId: Int64, statusCode: Int32) throws -> Void

- (void)setResponseStatus:(long long)connectionId :(int)statusCode;

Remarks

Use this method to set an HTTP status for the request. A good place to call this method is a request-marking event, such as GetRequest.

SetResponseString Method (WebSocketServer Module)

Sets a string to be served as a response.

Syntax

Swift
Objective-C

public func setResponseString(connectionId: Int64, dataStr: String, contentType: String, responseFilter: String) throws -> Void

- (void)setResponseString:(long long)connectionId :(NSString*)dataStr :(NSString*)contentType :(NSString*)responseFilter;

Remarks

Use this property to provide the response content in a string. The ResponseFilter parameter lets you select the element of the response that you would like to set with this call. The empty filter stands for the entire response body. The only response filter currently supported is parts:


parts[Index]	The body of a particular part of a multipart response.

Start Method (WebSocketServer Module)

Starts the server.

Syntax

Swift
Objective-C

public func start() throws -> Void

- (void)start;

Remarks

Use this method to activate the server and start listening to incoming connections.

Stop Method (WebSocketServer Module)

Stops the server.

Syntax

Swift
Objective-C

public func stop() throws -> Void

- (void)stop;

Remarks

Call this method to stop listening to incoming connections and deactivate the server.

Accept Event (WebSocketServer Module)

Reports an incoming connection.

Syntax

Swift
Objective-C

func onAccept(remoteAddress: String, remotePort: Int32, accept: inout Bool)

- (void)onAccept:(NSString*)remoteAddress :(int)remotePort :(int*)accept;

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to Connect event to be notified of every connection that has been set up.

AuthAttempt Event (WebSocketServer Module)

Fires when a connected client makes an authentication attempt.

Syntax

Swift
Objective-C

func onAuthAttempt(connectionID: Int64, httpMethod: String, uri: String, authMethod: String, username: String, password: String, allow: inout Bool)

- (void)onAuthAttempt:(long long)connectionID :(NSString*)HTTPMethod :(NSString*)URI :(NSString*)authMethod :(NSString*)username :(NSString*)password :(int*)allow;

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

ConnectionID contains the unique session identifier for that client, HTTPMethod specifies the HTTP method (GET, POST, etc.) used to access the URI resource, AuthMethod specifies the authentication method, and Username and Password contain the professed credentials.

BinaryData Event (WebSocketServer Module)

Passes a received chunk of binary data to the application.

Syntax

Swift
Objective-C

func onBinaryData(connectionID: Int64, buffer: Data, last: Bool)

- (void)onBinaryData:(long long)connectionID :(NSData*)buffer :(BOOL)last;

Remarks

The class fires this event repeatedly to pass incoming pieces of binary data to the application. The Last parameter indicates that this is the last chunk.

Connect Event (WebSocketServer Module)

Reports an accepted connection.

Syntax

Swift
Objective-C

func onConnect(connectionID: Int64, remoteAddress: String, remotePort: Int32)

- (void)onConnect:(long long)connectionID :(NSString*)remoteAddress :(int)remotePort;

Remarks

The class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as TLSHandshake or Data.

Data Event (WebSocketServer Module)

Supplies a data chunk received within a POST or PUT upload.

Syntax

Swift
Objective-C

func onData(connectionID: Int64, buffer: Data)

- (void)onData:(long long)connectionID :(NSData*)buffer;

Remarks

This event is fired to supply another piece of data received within a POST or PUT upload operation. This event may fire multiple times during a single request upload to pass the uploaded data to the application chunk-by-chunk.

Disconnect Event (WebSocketServer Module)

Fires to report a disconnected client.

Syntax

Swift
Objective-C

func onDisconnect(connectionID: Int64)

- (void)onDisconnect:(long long)connectionID;

Remarks

The class fires this event when a connected client disconnects.

Error Event (WebSocketServer Module)

Information about errors during data delivery.

Syntax

Swift
Objective-C

func onError(connectionID: Int64, errorCode: Int32, fatal: Bool, remote: Bool, description: String)

- (void)onError:(long long)connectionID :(int)errorCode :(BOOL)fatal :(BOOL)remote :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the HTTPS section.

ExternalSign Event (WebSocketServer Module)

Handles remote or external signing initiated by the server protocol.

Syntax

Swift
Objective-C

func onExternalSign(connectionID: Int64, operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)

- (void)onExternalSign:(long long)connectionID :(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

GetRequest Event (WebSocketServer Module)

Reports a GET request.

Syntax

Swift
Objective-C

func onGetRequest(connectionID: Int64, uri: String, handled: inout Bool)

- (void)onGetRequest:(long long)connectionID :(NSString*)URI :(int*)handled;

Remarks

The class fires this event to notify the application about a GET request received from the client.

ConnectionID indicates the connection that sent the request and URI suggests the requested resource.

Set Handled to true to indicate that your application's code will take care of the request. The application does it by providing the necessary details via SetResponseStatus, SetResponseHeader, SetResponseFile or SetResponseString methods. If the returned value of Handled is false, the server will try to take care of the request automatically by searching for the requested resource in DocumentRoot.

KeepAliveResponse Event (WebSocketServer Module)

Reports a response to a keep-alive message.

Syntax

Swift
Objective-C

func onKeepAliveResponse(connectionID: Int64)

- (void)onKeepAliveResponse:(long long)connectionID;

Remarks

This event is triggered when a response to a previously sent keep-alive message is received.

Notification Event (WebSocketServer Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


Open	Notifies the application about an established websocket request. This is a backward-compatibility-only notification: use OnWebSocketConnect event to get that notification instead.
Close	Notifies the application that a websocket connection was closed. This is a backward-compatibility-only notification. Use OnWebSocketDisconnect event instead.

TextData Event (WebSocketServer Module)

Passes a received chunk of text data to the application.

Syntax

Swift
Objective-C

func onTextData(connectionID: Int64, text: String, last: Bool)

- (void)onTextData:(long long)connectionID :(NSString*)text :(BOOL)last;

Remarks

The class fires this event repeatedly to pass incoming pieces of text data to the application. The Last parameter indicates that this is the last chunk.

TLSCertValidate Event (WebSocketServer Module)

Fires when a client certificate needs to be validated.

Syntax

Swift
Objective-C

func onTLSCertValidate(connectionID: Int64, accept: inout Bool)

- (void)onTLSCertValidate:(long long)connectionID :(int*)accept;

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

TLSEstablished Event (WebSocketServer Module)

Reports the setup of a TLS session.

Syntax

Swift
Objective-C

func onTLSEstablished(connectionID: Int64)

- (void)onTLSEstablished:(long long)connectionID;

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

TLSHandshake Event (WebSocketServer Module)

Fires when a newly established client connection initiates a TLS handshake.

Syntax

Swift
Objective-C

func onTLSHandshake(connectionID: Int64, serverName: String, abort: inout Bool)

- (void)onTLSHandshake:(long long)connectionID :(NSString*)serverName :(int*)abort;

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

TLSPSK Event (WebSocketServer Module)

Requests a pre-shared key for TLS-PSK.

Syntax

Swift
Objective-C

func onTLSPSK(connectionID: Int64, identity: String, psk: inout String, ciphersuite: inout String)

- (void)onTLSPSK:(long long)connectionID :(NSString*)identity :(NSString**)PSK :(NSString**)ciphersuite;

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

TLSShutdown Event (WebSocketServer Module)

Reports closure of a TLS session.

Syntax

Swift
Objective-C

func onTLSShutdown(connectionID: Int64)

- (void)onTLSShutdown:(long long)connectionID;

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a Disconnect, which marks the closure of the underlying TCP session.

WebSocketConnect Event (WebSocketServer Module)

Reports an accepted WebSocket connection.

Syntax

Swift
Objective-C

func onWebSocketConnect(connectionID: Int64, queryString: String, key: String, subProtocol: String, extensions: String)

- (void)onWebSocketConnect:(long long)connectionID :(NSString*)queryString :(NSString*)key :(NSString*)subProtocol :(NSString*)extensions;

Remarks

The class fires this event to report that a new WebSocket connection has been established. ConnectionId indicates the unique ID assigned to this connection.

WebSocketDisconnect Event (WebSocketServer Module)

Fires to report a disconnected WebSocket client.

Syntax

Swift
Objective-C

func onWebSocketDisconnect(connectionID: Int64)

- (void)onWebSocketDisconnect:(long long)connectionID;

Remarks

The class fires this event when a connected WebSocket client disconnects.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

certType
CertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

crlDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

issuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

keyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

privateKeyBytes
Data (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

qualified
Bool (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

subjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

valid
Bool (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

AsyncDocumentID

CustomParams

Data

ExternalHashCalculation

Fields

asyncDocumentID
String
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

customParams
String
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

data
String
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

externalHashCalculation
Bool
Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

hashAlgorithm
String
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

keyID
String
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

keySecret
String
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

method
AsyncSignMethods
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

mode
ExternalCryptoModes
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

publicKeyAlgorithm
String
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

The following fields are available:

Fields

dnsMode
DNSResolveModes
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

dnsPort
Int32
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

dnsQueryTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

dnsServers
String
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

dnsTotalTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

incomingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to read from the socket, per second.

localAddress
String
Default Value: ""

The local network interface to bind the socket to.

localPort
Int32
Default Value: 0

The local port number to bind the socket to.

outgoingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to write to the socket, per second.

timeout
Int32
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

useIPv6
Bool
Default Value: False

Enables or disables IP protocol version 6.

Constructors

public init()

Creates a new SocketSettings object.

TLSConnectionInfo Type

Contains information about a network connection.

Remarks

Use this property to check various details of the network connection. These include the total amounts of data transferred, the availability of TLS, and its parameters.

The following fields are available:

Fields

aeadCipher
Bool (read-only)
Default Value: False

Indicates whether the encryption algorithm used is an AEAD cipher.

chainValidationDetails
Int32 (read-only)
Default Value: 0

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:


cvrBadData	`0x0001`	One or more certificates in the validation path are malformed
cvrRevoked	`0x0002`	One or more certificates are revoked
cvrNotYetValid	`0x0004`	One or more certificates are not yet valid
cvrExpired	`0x0008`	One or more certificates are expired
cvrInvalidSignature	`0x0010`	A certificate contains a non-valid digital signature
cvrUnknownCA	`0x0020`	A CA certificate for one or more certificates has not been found (chain incomplete)
cvrCAUnauthorized	`0x0040`	One of the CA certificates are not authorized to act as CA
cvrCRLNotVerified	`0x0080`	One or more CRLs could not be verified
cvrOCSPNotVerified	`0x0100`	One or more OCSP responses could not be verified
cvrIdentityMismatch	`0x0200`	The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate
cvrNoKeyUsage	`0x0400`	A mandatory key usage is not enabled in one of the chain certificates
cvrBlocked	`0x0800`	One or more certificates are blocked
cvrFailure	`0x1000`	General validation failure
cvrChainLoop	`0x2000`	Chain loop: one of the CA certificates recursively signs itself
cvrWeakAlgorithm	`0x4000`	A weak algorithm is used in one of certificates or revocation elements
cvrUserEnforced	`0x8000`	The chain was considered invalid following intervention from a user code

chainValidationResult
ChainValidities (read-only)
Default Value: 0

The outcome of a certificate chain validation routine.

Available options:


cvtValid	`0`	The chain is valid
cvtValidButUntrusted	`1`	The chain is valid, but the root certificate is not trusted
cvtInvalid	`2`	The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)
cvtCantBeEstablished	`3`	The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

ciphersuite
String (read-only)
Default Value: ""

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

clientAuthenticated
Bool (read-only)
Default Value: False

Specifies whether client authentication was performed during this connection.

clientAuthRequested
Bool (read-only)
Default Value: False

Specifies whether client authentication was requested during this connection.

connectionEstablished
Bool (read-only)
Default Value: False

Indicates whether the connection has been established fully.

connectionID
Data (read-only)
Default Value: ""

The unique identifier assigned to this connection.

digestAlgorithm
String (read-only)
Default Value: ""

The digest algorithm used in a TLS-enabled connection.

encryptionAlgorithm
String (read-only)
Default Value: ""

The symmetric encryption algorithm used in a TLS-enabled connection.

exportable
Bool (read-only)
Default Value: False

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

id
Int64 (read-only)
Default Value: -1

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

keyExchangeAlgorithm
String (read-only)
Default Value: ""

The key exchange algorithm used in a TLS-enabled connection.

keyExchangeKeyBits
Int32 (read-only)
Default Value: 0

The length of the key exchange key of a TLS-enabled connection.

namedECCurve
String (read-only)
Default Value: ""

The elliptic curve used in this connection.

pfsCipher
Bool (read-only)
Default Value: False

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

preSharedIdentity
String
Default Value: ""

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedIdentityHint
String (read-only)
Default Value: ""

A hint professed by the server to help the client select the PSK identity to use.

publicKeyBits
Int32 (read-only)
Default Value: 0

The length of the public key.

remoteAddress
String (read-only)
Default Value: ""

The client's IP address.

remotePort
Int32 (read-only)
Default Value: 0

The remote port of the client connection.

resumedSession
Bool (read-only)
Default Value: False

Indicates whether a TLS-enabled connection was spawned from another TLS connection

secureConnection
Bool (read-only)
Default Value: False

Indicates whether TLS or SSL is enabled for this connection.

serverAuthenticated
Bool (read-only)
Default Value: False

Indicates whether server authentication was performed during a TLS-enabled connection.

signatureAlgorithm
String (read-only)
Default Value: ""

The signature algorithm used in a TLS handshake.

symmetricBlockSize
Int32 (read-only)
Default Value: 0

The block size of the symmetric algorithm used.

symmetricKeyBits
Int32 (read-only)
Default Value: 0

The key length of the symmetric algorithm used.

totalBytesReceived
Int64 (read-only)
Default Value: 0

The total number of bytes received over this connection.

totalBytesSent
Int64 (read-only)
Default Value: 0

The total number of bytes sent over this connection.

validationLog
String (read-only)
Default Value: ""

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

version
String (read-only)
Default Value: ""

Indicates the version of SSL/TLS protocol negotiated during this connection.

Constructors

public init()

Creates a new TLSConnectionInfo object.

TLSSettings Type

A container for TLS connection settings.

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

The following fields are available:

AutoValidateCertificates

ForceResumeIfDestinationChanges

PreSharedIdentity

PreSharedKey

PreSharedKeyCiphersuite

RenegotiationAttackPreventionMode

RevocationCheck

SSLOptions

TLSMode

UseExtendedMasterSecret

UseSessionResumption

Versions

Fields

autoValidateCertificates
Bool
Default Value: True

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

baseConfiguration
SecureTransportPredefinedConfigurations
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

ciphersuites
String
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by . Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

clientAuth
ClientAuthTypes
Default Value: 0

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

ecCurves
String
Default Value: ""

Defines the elliptic curves to enable.

extensions
String
Default Value: ""

Provides access to TLS extensions.

forceResumeIfDestinationChanges
Bool
Default Value: False

Whether to force TLS session resumption when the destination address changes.

preSharedIdentity
String
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedKey
String
Default Value: ""

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

preSharedKeyCiphersuite
String
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default Value: 2

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

revocationCheck
RevocationCheckKinds
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

sslOptions
Int32
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

tlsMode
SSLModes
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

useExtendedMasterSecret
Bool
Default Value: False

Enables the Extended Master Secret Extension, as defined in RFC 7627.

useSessionResumption
Bool
Default Value: False

Enables or disables the TLS session resumption capability.

versions
Int32
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

public init()

Creates a new TLSSettings object.

UserAccount Type

A container for user account information.

Remarks

UserAccount objects are used to store user account information, such as logins and passwords.

The following fields are available:

Fields

associatedData
Data
Default Value: ""

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

basePath
String
Default Value: ""

Base path for this user in the server's file system.

certificate
Data
Default Value: ""

Contains the user's certificate.

data
String
Default Value: ""

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

email
String
Default Value: ""

The user's email address.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

hashAlgorithm
String
Default Value: ""

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:


SB_MAC_ALGORITHM_HMAC_SHA1	`SHA1`
SB_MAC_ALGORITHM_HMAC_SHA256	`SHA256`
SB_MAC_ALGORITHM_HMAC_SHA512	`SHA512`

incomingSpeedLimit
Int32
Default Value: 0

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

otpAlgorithm
OTPAlgorithms
Default Value: 0

The algorithm used to generate one-time passwords (OTP) for this user, either HOTP (Hash-based OTP) or TOTP (Time-based OTP). In the former case, a value of a dedicated counter is used to generate a unique password, while in the latter the password is generated on the basis of the current time value.


oaHmac	`0`
oaTime	`1`

otpLen
Int32
Default Value: 0

Specifies the length of the user's OTP password.

otpValue
Int32
Default Value: 0

The user's time interval (TOTP) or Counter (HOTP).

outgoingSpeedLimit
Int32
Default Value: 0

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

password
String
Default Value: ""

The user's authentication password.

sharedSecret
Data
Default Value: ""

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

sshKey
Data
Default Value: ""

Contains the user's SSH key.

username
String
Default Value: ""

The registered name (login) of the user.

Constructors

public init()

Creates a new UserAccount object

Config Settings (WebSocketServer Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

WebSocketServer Config Settings

AllowKeepAlive: Enables or disables keep-alive mode.

Use this property to enable or disable the keep-alive connection mode. If keep-alive is enabled, clients that choose to use it may stay connected for a while.

AllowOptionsResponseWithoutAuth: Enables unauthenticated responses to OPTIONS requests.

Set this property to true to allow the server serve OPTIONS requests without prior authentication of the client.

AuthBasic: Turns on/off the basic authentication.

When switched on, connecting clients can use the basic authentication.

AuthDigest: Turns on/off the digest authentication.

When switched on, connecting clients can use the digest authentication.

AuthDigestExpire: Specifies digest expiration time for digest authentication.

Use this property to specify the digest expiration time for digest authentication, in seconds. The default setting is 20.

AuthRealm: Specifies authentication realm for digest and NTLM authentication.

Specifies authentication realm for digest and NTLM authentication types.

BoundAddress: Returns the bound address of the listening socket.

Use this property to obtain the bound address of the listening socket.

BoundPort: The port that was bound by the server.

Returns the port number that was bound by the server.

CompressionLevel: The default compression level to use.

Assign this property with the compression level (1 to 9) to apply for gzipped responses. 1 stands for the lightest but fastest compression, and 9 for the best but the slowest.

DocumentRoot: The document root of the server.

Use this property to specify a local folder which is going to be the server's document root (the mount point of the virtual home directory).

DualStack: Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

HandshakeTimeout: The HTTPS handshake timeout.

The HTTPS handshake timeout in milliseconds.

HomePage: Specifies the home page resource name.

Use this property to specify the home page (/) resource name.

Host: The host to bind to.

Specifies a specific interface the server should listen on.

Port: The port to listen on.

This config setting mimics the Port property. Please use that instead.

PortRangeFrom: The lower bound of allowed port scope to listen on.

Specifies the lowest port number the server may use if dynamic allocation is used.

PortRangeTo: The higher bound of allowed port scope to listen on.

Specifies the highest port number the server may use if dynamic allocation is used.

PreSharedIdentityHint: Gets or sets the PSK identity hint.

Use this property to get or set the PSK identity hint to be used during PSK-based TLS handshake.

RequestFilter: The request string modifier.

Use this property to tune up the request string as returned by GetRequestString method. Supported filters: params (request parameters only), params[Index] or params['Name'] (a specific request parameter), parts[Index] (the contents of a particular part of a multipart message). An empty request filter makes GetRequestString return the whole body of the request.

SessionTimeout: The HTTP session timeout.

The HTTP session timeout in milliseconds.

SleepLen: Adjusts the server loop idling time.

Use this property to adjust the server connection loop idling time between consecutive connection read calls. Increasing this setting may help combat excessive CPU usage in performance-restricted or busy environments. Setting it to zero removes the idling altogether, which maximizes the throughput but may cause excessive CPU load.

TempDir: A temporary directory to use.

Specifies the temporary directory to use during server operation.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TLSExtensions: TBD.

TBD

TLSPeerExtensions: TBD.

TBD

TLSServerCertIndex: Specifies the index of the server certificate to use.

This setting allows your code to specify the exact certificate/chain to use for the TLS handshake that has just commenced, if your server is configured with more than one chain. This property should typically be adjusted from within the OnTLSHandshake event handler.

Note: the server component normally picks up the most appropriate certificate automatically. This setting is a wiretap for scenarios where unusual or cherry-picked certificate selection logic may be necessary.

UseChunkedTransfer: Enables chunked transfer.

Use this property to enable chunked content encoding.

UseCompression: Enables or disables server-side compression.

Use this property to enable or disable server-side content compression.

WebsiteName: The website name for the TLS certificate.

Assign this property with a name to put in a self-generated TLS certificate.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (WebSocketServer Module)

WebSocketServer Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)