PDFEncryptor Module

Properties Methods Events Config Settings Errors

The PDFEncryptor module encrypts PDF documents.

Syntax

SecureBlackbox.PDFEncryptor

Remarks

PDFEncryptor encrypts PDF documents with passwords or certificates.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


DocumentInfo	Contains information about the document properties.
EncryptionAlgorithm	The encryption algorithm to encrypt the document with.
EncryptionCertificate	The encryption certificate.
EncryptMetadata	Specifies whether to encrypt the document metadata.
FIPSMode	Reserved.
InputBytes	Use this property to pass the input to module in byte array form.
InputFile	The PDF file to be encrypted.
OutputBytes	Use this property to read the output the module object has produced.
OutputFile	The file to save the encrypted document to.
OwnerPassword	The owner password.
Permissions	Specifies the document permissions associated with the encryption.
UserPassword	The user password.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
Encrypt	Encrypts the PDF document.
Reset	Resets the module settings.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


DocumentLoaded	This event is fired when the document has been loaded into memory.
Error	Information about errors during encryption.
Notification	This event notifies the application about an underlying control flow event.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


DocumentVersion	The document version from the PDF document header.
EmptySignatureFieldAddRevInfo[Index]	Specifies if revocation checking should be performed.
EmptySignatureFieldAlternateName[Index]	Contains an alternate field name.
EmptySignatureFieldCount	The number of empty signature form fields.
EmptySignatureFieldFlags[Index]	The field flags of the signature form field.
EmptySignatureFieldHeight[Index]	The Height of the empty signature form field.
EmptySignatureFieldInvisible[Index]	The visibility status of the field.
EmptySignatureFieldLegalAttestations[Index]	Specifies the legal attestations that are associated with the signature.
EmptySignatureFieldMappingName[Index]	The mapping name to be used when exporting form field data from the document.
EmptySignatureFieldName[Index]	Textual field name.
EmptySignatureFieldOffsetX[Index]	The field's offset from the left page border.
EmptySignatureFieldOffsetY[Index]	The field's offset from the bottom page border.
EmptySignatureFieldPage[Index]	The index of the form field's page in the document.
EmptySignatureFieldRequiredAllowedChanges[Index]	Specifies the changes allowed by the signature.
EmptySignatureFieldRequiredConstraints[Index]	Specifies the required Seed Value Dictionary (SVD) constraints.
EmptySignatureFieldRequiredDigestAlgorithms[Index]	Specifies the required digest algorithms.
EmptySignatureFieldRequiredFilter[Index]	Specifies the required filter.
EmptySignatureFieldRequiredLockAction[Index]	Indicates which set of fields shall be locked.
EmptySignatureFieldRequiredLockFields[Index]	Indicates the fields that shall be locked on signing.
EmptySignatureFieldRequiredReasons[Index]	Specifies the required reasons.
EmptySignatureFieldRequiredSubfilters[Index]	Specifies the required subfilters.
EmptySignatureFieldTimestampRequired[Index]	Specifies if the signature should be timestamped.
EmptySignatureFieldTSPURL[Index]	URL for a TSP server.
EmptySignatureFieldWidth[Index]	The Width of the empty signature form field.
EncryptionHandlerName	Specifies the custom security handler PDF-name.
HardenedKeyGeneration	Specifies if hardened Key generation should be used.
PageInfoCount	The number of pages.
PageInfoCropBoxEmpty[Index]	Check if the page's crop box is empty or not.
PageInfoCropLLX[Index]	Defines the X coordinate of the lower left corner of the crop box.
PageInfoCropLLY[Index]	Defines the Y coordinate of the lower left corner of the crop box.
PageInfoCropURX[Index]	Defines the X coordinate of the upper right corner of the crop box.
PageInfoCropURY[Index]	Defines the Y coordinate of the upper right corner of the crop box.
PageInfoHeight[Index]	The Height of the page.
PageInfoMediaLLX[Index]	Defines the X coordinate of the lower left corner of the media box.
PageInfoMediaLLY[Index]	Defines the Y coordinate of the lower left corner of the media box.
PageInfoMediaURX[Index]	Defines the X coordinate of the upper right corner of the media box.
PageInfoMediaURY[Index]	Defines the Y coordinate of the upper right corner of the media box.
PageInfoRotate[Index]	The Rotate value of the page.
PageInfoUserUnit[Index]	Defines the size of default user space units.
PageInfoWidth[Index]	The Width of the page.
RC4KeyBits	Specifies the number of key bits used for the RC4 algorithm.
TempPath	Path for storing temporary files.
XMPMetadataContent	The XMP metadata content.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

DocumentInfo Property (PDFEncryptor Module)

Contains information about the document properties.

public var documentInfo: PDFDocumentInfo {
  get {...}
}


@property (nonatomic,readonly,assign,getter=documentInfoEncryptionAlgorithm) NSString* documentInfoEncryptionAlgorithm;

- (NSString*)documentInfoEncryptionAlgorithm;

@property (nonatomic,readonly,assign,getter=documentInfoEncryptionType) int documentInfoEncryptionType;

- (int)documentInfoEncryptionType;

@property (nonatomic,readonly,assign,getter=documentInfoMetadataEncrypted) BOOL documentInfoMetadataEncrypted;

- (BOOL)documentInfoMetadataEncrypted;

@property (nonatomic,readonly,assign,getter=documentInfoPermissions) int documentInfoPermissions;

- (int)documentInfoPermissions;

Default Value

Remarks

Use this property to access general parameters of the document being processed. A good place to check this property is in the handler of the DocumentLoaded event.

EncryptionAlgorithm Property (PDFEncryptor Module)

The encryption algorithm to encrypt the document with.

Syntax

Swift
Objective-C

public var encryptionAlgorithm: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=encryptionAlgorithm,setter=setEncryptionAlgorithm:) NSString* encryptionAlgorithm;

- (NSString*)encryptionAlgorithm;
- (void)setEncryptionAlgorithm :(NSString*)newEncryptionAlgorithm;

Default Value

"AES256"

Remarks

Use this property to specify the encryption algorithm to encrypt the PDF document with.

Supported values:


SB_SYMMETRIC_ALGORITHM_RC4	`RC4`
SB_SYMMETRIC_ALGORITHM_AES128	`AES128`
SB_SYMMETRIC_ALGORITHM_AES256	`AES256`

EncryptionCertificate Property (PDFEncryptor Module)

The encryption certificate.

Syntax

Swift
Objective-C

public var encryptionCertificate: Certificate {
  get {...}
  set {...}
}


@property (nonatomic,readonly,assign,getter=encryptionCertificateBytes) NSData* encryptionCertificateBytes;

- (NSData*)encryptionCertificateBytes;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateCA,setter=setEncryptionCertificateCA:) BOOL encryptionCertificateCA;

- (BOOL)encryptionCertificateCA;
- (void)setEncryptionCertificateCA :(BOOL)newEncryptionCertificateCA;

@property (nonatomic,readonly,assign,getter=encryptionCertificateCAKeyID) NSData* encryptionCertificateCAKeyID;

- (NSData*)encryptionCertificateCAKeyID;

@property (nonatomic,readonly,assign,getter=encryptionCertificateCertType) int encryptionCertificateCertType;

- (int)encryptionCertificateCertType;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateCRLDistributionPoints,setter=setEncryptionCertificateCRLDistributionPoints:) NSString* encryptionCertificateCRLDistributionPoints;

- (NSString*)encryptionCertificateCRLDistributionPoints;
- (void)setEncryptionCertificateCRLDistributionPoints :(NSString*)newEncryptionCertificateCRLDistributionPoints;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateCurve,setter=setEncryptionCertificateCurve:) NSString* encryptionCertificateCurve;

- (NSString*)encryptionCertificateCurve;
- (void)setEncryptionCertificateCurve :(NSString*)newEncryptionCertificateCurve;

@property (nonatomic,readonly,assign,getter=encryptionCertificateFingerprint) NSString* encryptionCertificateFingerprint;

- (NSString*)encryptionCertificateFingerprint;

@property (nonatomic,readonly,assign,getter=encryptionCertificateFriendlyName) NSString* encryptionCertificateFriendlyName;

- (NSString*)encryptionCertificateFriendlyName;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateHandle,setter=setEncryptionCertificateHandle:) long long encryptionCertificateHandle;

- (long long)encryptionCertificateHandle;
- (void)setEncryptionCertificateHandle :(long long)newEncryptionCertificateHandle;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateHashAlgorithm,setter=setEncryptionCertificateHashAlgorithm:) NSString* encryptionCertificateHashAlgorithm;

- (NSString*)encryptionCertificateHashAlgorithm;
- (void)setEncryptionCertificateHashAlgorithm :(NSString*)newEncryptionCertificateHashAlgorithm;

@property (nonatomic,readonly,assign,getter=encryptionCertificateIssuer) NSString* encryptionCertificateIssuer;

- (NSString*)encryptionCertificateIssuer;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateIssuerRDN,setter=setEncryptionCertificateIssuerRDN:) NSString* encryptionCertificateIssuerRDN;

- (NSString*)encryptionCertificateIssuerRDN;
- (void)setEncryptionCertificateIssuerRDN :(NSString*)newEncryptionCertificateIssuerRDN;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateKeyAlgorithm,setter=setEncryptionCertificateKeyAlgorithm:) NSString* encryptionCertificateKeyAlgorithm;

- (NSString*)encryptionCertificateKeyAlgorithm;
- (void)setEncryptionCertificateKeyAlgorithm :(NSString*)newEncryptionCertificateKeyAlgorithm;

@property (nonatomic,readonly,assign,getter=encryptionCertificateKeyBits) int encryptionCertificateKeyBits;

- (int)encryptionCertificateKeyBits;

@property (nonatomic,readonly,assign,getter=encryptionCertificateKeyFingerprint) NSString* encryptionCertificateKeyFingerprint;

- (NSString*)encryptionCertificateKeyFingerprint;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateKeyUsage,setter=setEncryptionCertificateKeyUsage:) int encryptionCertificateKeyUsage;

- (int)encryptionCertificateKeyUsage;
- (void)setEncryptionCertificateKeyUsage :(int)newEncryptionCertificateKeyUsage;

@property (nonatomic,readonly,assign,getter=encryptionCertificateKeyValid) BOOL encryptionCertificateKeyValid;

- (BOOL)encryptionCertificateKeyValid;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateOCSPLocations,setter=setEncryptionCertificateOCSPLocations:) NSString* encryptionCertificateOCSPLocations;

- (NSString*)encryptionCertificateOCSPLocations;
- (void)setEncryptionCertificateOCSPLocations :(NSString*)newEncryptionCertificateOCSPLocations;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateOCSPNoCheck,setter=setEncryptionCertificateOCSPNoCheck:) BOOL encryptionCertificateOCSPNoCheck;

- (BOOL)encryptionCertificateOCSPNoCheck;
- (void)setEncryptionCertificateOCSPNoCheck :(BOOL)newEncryptionCertificateOCSPNoCheck;

@property (nonatomic,readonly,assign,getter=encryptionCertificateOrigin) int encryptionCertificateOrigin;

- (int)encryptionCertificateOrigin;

@property (nonatomic,readwrite,assign,getter=encryptionCertificatePolicyIDs,setter=setEncryptionCertificatePolicyIDs:) NSString* encryptionCertificatePolicyIDs;

- (NSString*)encryptionCertificatePolicyIDs;
- (void)setEncryptionCertificatePolicyIDs :(NSString*)newEncryptionCertificatePolicyIDs;

@property (nonatomic,readonly,assign,getter=encryptionCertificatePrivateKeyBytes) NSData* encryptionCertificatePrivateKeyBytes;

- (NSData*)encryptionCertificatePrivateKeyBytes;

@property (nonatomic,readonly,assign,getter=encryptionCertificatePrivateKeyExists) BOOL encryptionCertificatePrivateKeyExists;

- (BOOL)encryptionCertificatePrivateKeyExists;

@property (nonatomic,readonly,assign,getter=encryptionCertificatePrivateKeyExtractable) BOOL encryptionCertificatePrivateKeyExtractable;

- (BOOL)encryptionCertificatePrivateKeyExtractable;

@property (nonatomic,readonly,assign,getter=encryptionCertificatePublicKeyBytes) NSData* encryptionCertificatePublicKeyBytes;

- (NSData*)encryptionCertificatePublicKeyBytes;

@property (nonatomic,readonly,assign,getter=encryptionCertificateQualified) BOOL encryptionCertificateQualified;

- (BOOL)encryptionCertificateQualified;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateQualifiedStatements,setter=setEncryptionCertificateQualifiedStatements:) int encryptionCertificateQualifiedStatements;

- (int)encryptionCertificateQualifiedStatements;
- (void)setEncryptionCertificateQualifiedStatements :(int)newEncryptionCertificateQualifiedStatements;

@property (nonatomic,readonly,assign,getter=encryptionCertificateQualifiers) NSString* encryptionCertificateQualifiers;

- (NSString*)encryptionCertificateQualifiers;

@property (nonatomic,readonly,assign,getter=encryptionCertificateSelfSigned) BOOL encryptionCertificateSelfSigned;

- (BOOL)encryptionCertificateSelfSigned;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateSerialNumber,setter=setEncryptionCertificateSerialNumber:) NSData* encryptionCertificateSerialNumber;

- (NSData*)encryptionCertificateSerialNumber;
- (void)setEncryptionCertificateSerialNumber :(NSData*)newEncryptionCertificateSerialNumber;

@property (nonatomic,readonly,assign,getter=encryptionCertificateSigAlgorithm) NSString* encryptionCertificateSigAlgorithm;

- (NSString*)encryptionCertificateSigAlgorithm;

@property (nonatomic,readonly,assign,getter=encryptionCertificateSource) int encryptionCertificateSource;

- (int)encryptionCertificateSource;

@property (nonatomic,readonly,assign,getter=encryptionCertificateSubject) NSString* encryptionCertificateSubject;

- (NSString*)encryptionCertificateSubject;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateSubjectAlternativeName,setter=setEncryptionCertificateSubjectAlternativeName:) NSString* encryptionCertificateSubjectAlternativeName;

- (NSString*)encryptionCertificateSubjectAlternativeName;
- (void)setEncryptionCertificateSubjectAlternativeName :(NSString*)newEncryptionCertificateSubjectAlternativeName;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateSubjectKeyID,setter=setEncryptionCertificateSubjectKeyID:) NSData* encryptionCertificateSubjectKeyID;

- (NSData*)encryptionCertificateSubjectKeyID;
- (void)setEncryptionCertificateSubjectKeyID :(NSData*)newEncryptionCertificateSubjectKeyID;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateSubjectRDN,setter=setEncryptionCertificateSubjectRDN:) NSString* encryptionCertificateSubjectRDN;

- (NSString*)encryptionCertificateSubjectRDN;
- (void)setEncryptionCertificateSubjectRDN :(NSString*)newEncryptionCertificateSubjectRDN;

@property (nonatomic,readonly,assign,getter=encryptionCertificateValid) BOOL encryptionCertificateValid;

- (BOOL)encryptionCertificateValid;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateValidFrom,setter=setEncryptionCertificateValidFrom:) NSString* encryptionCertificateValidFrom;

- (NSString*)encryptionCertificateValidFrom;
- (void)setEncryptionCertificateValidFrom :(NSString*)newEncryptionCertificateValidFrom;

@property (nonatomic,readwrite,assign,getter=encryptionCertificateValidTo,setter=setEncryptionCertificateValidTo:) NSString* encryptionCertificateValidTo;

- (NSString*)encryptionCertificateValidTo;
- (void)setEncryptionCertificateValidTo :(NSString*)newEncryptionCertificateValidTo;

Default Value

Remarks

Use this property to provide the encryption certificate. It does not need to have a private key, but the intended recipient of this PDF document does.

EncryptMetadata Property (PDFEncryptor Module)

Specifies whether to encrypt the document metadata.

Syntax

Swift
Objective-C

public var encryptMetadata: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=encryptMetadata,setter=setEncryptMetadata:) BOOL encryptMetadata;

- (BOOL)encryptMetadata;
- (void)setEncryptMetadata :(BOOL)newEncryptMetadata;

Default Value

True

Remarks

Use this property to enable or disable metadata encryption.

Metadata contains additional information about the document, such as its name and author.

FIPSMode Property (PDFEncryptor Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

InputBytes Property (PDFEncryptor Module)

Use this property to pass the input to module in byte array form.

Syntax

Swift
Objective-C

public var inputBytes: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (PDFEncryptor Module)

The PDF file to be encrypted.

Syntax

Swift
Objective-C

public var inputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

Remarks

Provide the path to the PDF document to be encrypted.

OutputBytes Property (PDFEncryptor Module)

Use this property to read the output the module object has produced.

Syntax

Swift
Objective-C

public var outputBytes: Data {
  get {...}
}


@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (PDFEncryptor Module)

The file to save the encrypted document to.

Syntax

Swift
Objective-C

public var outputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

Remarks

Specifies the path where the encrypted PDF should be saved.

OwnerPassword Property (PDFEncryptor Module)

The owner password.

Syntax

Swift
Objective-C

public var ownerPassword: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=ownerPassword,setter=setOwnerPassword:) NSString* ownerPassword;

- (NSString*)ownerPassword;
- (void)setOwnerPassword :(NSString*)newOwnerPassword;

Default Value

Remarks

Use this property to provide the document owner password. Though it may be different from UserPassword, most implementations use the same value for both.

Permissions Property (PDFEncryptor Module)

Specifies the document permissions associated with the encryption.

Syntax

Swift
Objective-C

public var permissions: Int32 {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=permissions,setter=setPermissions:) int permissions;

- (int)permissions;
- (void)setPermissions :(int)newPermissions;

Default Value

Remarks

Use this property to specify the permissions protected by this encryption. The PDF specification expects applications to comply with these permissions when handling encrypted documents, but keep in mind that it is a policy-like requirement rather than an enforcement. Provide the permissions as a bit mask of the following flags:


pepAnnotations	`0x0001`	Annotating is allowed
pepAssemble	`0x0002`	Assembling a new document on the basis of the processed one is allowed
pepExtract	`0x0004`	Extraction/copying of the pictures and text from the document is allowed
pepExtractAcc	`0x0008`	Content extraction is allowed for accessibility purposes only
pepFillInForms	`0x0010`	Filling forms in is allowed
pepHighQualityPrint	`0x0020`	High quality printing is allowed
pepLowQualityPrint	`0x0040`	Low quality printing is allowed
pepModify	`0x0080`	Modifications are allowed

UserPassword Property (PDFEncryptor Module)

The user password.

Syntax

Swift
Objective-C

public var userPassword: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=userPassword,setter=setUserPassword:) NSString* userPassword;

- (NSString*)userPassword;
- (void)setUserPassword :(NSString*)newUserPassword;

Default Value

Remarks

Use this property to provide the document user password. Though it may be different from OwnerPassword, most implementations use the same value for both.

Config Method (PDFEncryptor Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (PDFEncryptor Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Encrypt Method (PDFEncryptor Module)

Encrypts the PDF document.

Syntax

Swift
Objective-C

public func encrypt() throws -> Void

- (void)encrypt;

Remarks

Use this method to encrypt the PDF document as configured in the object's properties.

Reset Method (PDFEncryptor Module)

Resets the component settings.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

DocumentLoaded Event (PDFEncryptor Module)

This event is fired when the document has been loaded into memory.

Syntax

Swift
Objective-C

func onDocumentLoaded(cancel: inout Bool)

- (void)onDocumentLoaded:(int*)cancel;

Remarks

The handler for this event is a good place to check the document structure, which may be useful when preparing the signature. For example, you can use the Pages information to find the optimal position for the signature widget.

Set Cancel to true to terminate document processing on this stage.

Error Event (PDFEncryptor Module)

Information about errors during encryption.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during PDF processing.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (PDFEncryptor Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


DocumentLoaded	Notifies the application that the document has been loaded. This is a backward-compatibility-only notification. Use OnDocumentLoaded event instead.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

certType
CertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

crlDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

issuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

keyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

privateKeyBytes
Data (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

qualified
Bool (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

subjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

valid
Bool (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

PDFDocumentInfo Type

Contains document security information.

Remarks

This type provides an overview of the document security parameters, including the encryption method (if used) and signature count. This information is available early into the signing/validation process and lets you prepare for the subsequent signature validation.

The following fields are available:

Fields

encryptionAlgorithm
String (read-only)
Default Value: ""

The symmetric algorithm used to encrypt the document.

This property contains the encryption algorithm that was used to encrypt the PDF document.

Supported values:


SB_SYMMETRIC_ALGORITHM_RC4	`RC4`
SB_SYMMETRIC_ALGORITHM_AES128	`AES128`
SB_SYMMETRIC_ALGORITHM_AES256	`AES256`

encryptionType
PDFEncryptionTypes (read-only)
Default Value: 1

The document encryption type.

This property indicates the kind of encryption that was used to encrypt the PDF document.

Supported values:


petPassword	`1`	The document is encrypted with a password.
petCertificate	`2`	The document is encrypted with a certificate (or many certificates).

metadataEncrypted
Bool (read-only)
Default Value: True

Indicates if the document metadata is encrypted.

Use this property to check if the document metadata is encrypted.

Metadata contains additional information about the document such as its name and author.

permissions
Int32 (read-only)
Default Value: 0

Contains the document permissions associated with the encryption.

Use this property to check the permissions protected by this encryption. The PDF specification expects applications to comply with these permissions when handling encrypted documents. Contains a bit mask of the following flags:


pepAnnotations	`0x0001`	Annotating is allowed
pepAssemble	`0x0002`	Assembling a new document on the basis of the processed one is allowed
pepExtract	`0x0004`	Extraction/copying of the pictures and text from the document is allowed
pepExtractAcc	`0x0008`	Content extraction is allowed for accessibility purposes only
pepFillInForms	`0x0010`	Filling forms in is allowed
pepHighQualityPrint	`0x0020`	High quality printing is allowed
pepLowQualityPrint	`0x0040`	Low quality printing is allowed
pepModify	`0x0080`	Modifications are allowed

Constructors

public init()

Initializes an instance of PDFDocumentInfo class.

Config Settings (PDFEncryptor Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

PDFEncryptor Config Settings

DocumentVersion: The document version from the PDF document header.

This property contains the PDF document version provided in the document header. The version is returned in the form "Major.Minor": for example, PDF-1.7 will be returned as "1.7", and PDF-2.0 as "2.0".

EmptySignatureFieldAddRevInfo[Index]: Specifies if revocation checking should be performed.

This property contains True if the viewing application should check the signing certificate revocation info and include the revocation information within the signature value.

EmptySignatureFieldAlternateName[Index]: Contains an alternate field name.

This property contains an alternate field name to be used in place of the actual field name wherever the field must be identified in the user interface.

EmptySignatureFieldCount: The number of empty signature form fields.

Returns the number of empty signature form fields available.

EmptySignatureFieldFlags[Index]: The field flags of the signature form field.

This property contains the empty signature form field flags ("Ff" entry in the signature field dictionary).

EmptySignatureFieldHeight[Index]: The Height of the empty signature form field.

This property contains the height of the empty signature form field.

EmptySignatureFieldInvisible[Index]: The visibility status of the field.

This property contains True if the empty signature form field is visible.

EmptySignatureFieldLegalAttestations[Index]: Specifies the legal attestations that are associated with the signature.

This property contains the legal attestations that are associated with the signature.

EmptySignatureFieldMappingName[Index]: The mapping name to be used when exporting form field data from the document.

This property contains the name to be used when exporting form field data from the document.

EmptySignatureFieldName[Index]: Textual field name.

This property contains the empty signature field name.

EmptySignatureFieldOffsetX[Index]: The field's offset from the left page border.

This property contains the horizontal offset of the empty signature form field.

EmptySignatureFieldOffsetY[Index]: The field's offset from the bottom page border.

This property contains the vertical offset of the empty signature form field.

EmptySignatureFieldPage[Index]: The index of the form field's page in the document.

This property contains the index of the empty signature form field's page in the document.

EmptySignatureFieldRequiredAllowedChanges[Index]: Specifies the changes allowed by the signature.

This property contains the changes that are allowed to the document when the signature field is signed.

EmptySignatureFieldRequiredConstraints[Index]: Specifies the required Seed Value Dictionary (SVD) constraints.

This property contains the required SVD constraints. If a certain bit in RequiredConstraints is switched on, the corresponding data item is constrained.

EmptySignatureFieldRequiredDigestAlgorithms[Index]: Specifies the required digest algorithms.

This property contains the list of the digest algorithms used for signature generation.

EmptySignatureFieldRequiredFilter[Index]: Specifies the required filter.

This property contains the required filter (name of the preferred signature handler) to use for signature generation.

EmptySignatureFieldRequiredLockAction[Index]: Indicates which set of fields shall be locked.

This property contains a set of form fields that shall be locked when the current signature field is signed.

EmptySignatureFieldRequiredLockFields[Index]: Indicates the fields that shall be locked on signing.

This property contains the list of form field names that shall be locked when the current signature field is signed. Whether this list shall be included or excluded is defined by the EmptySignatureFieldRequiredLockAction[Index] property.

EmptySignatureFieldRequiredReasons[Index]: Specifies the required reasons.

This property contains the required reasons used for signature generation.

EmptySignatureFieldRequiredSubfilters[Index]: Specifies the required subfilters.

This property contains the list of subfilters required by the signature. A subfilter represents the encoding to use when signing the PDF form.

EmptySignatureFieldTimestampRequired[Index]: Specifies if the signature should be timestamped.

This property contains True if the signature should be timestamped.

EmptySignatureFieldTSPURL[Index]: URL for a TSP server.

This property contains the TSP server URL.

EmptySignatureFieldWidth[Index]: The Width of the empty signature form field.

This property contains the width of the empty signature form field.

EncryptionHandlerName: Specifies the custom security handler PDF-name.

Specifies the custom security handler PDF-name for the encryption handler.

HardenedKeyGeneration: Specifies if hardened Key generation should be used.

Specifies if hardened Key generation should be used when the AES-256 encryption algorithm and password encryption are used.

PageInfoCount: The number of pages.

Returns the number of pages available.

PageInfoCropBoxEmpty[Index]: Check if the page's crop box is empty or not.

This property contains True if the crop box is empty, and False otherwise. The crop box defines the region to which the contents of the page shall be clipped (cropped) when displayed or printed.

PageInfoCropLLX[Index]: Defines the X coordinate of the lower left corner of the crop box.

This property contains the X coordinate of the lower left corner of the crop box of the page. The crop box defines the region to which the contents of the page shall be clipped (cropped) when displayed or printed.

PageInfoCropLLY[Index]: Defines the Y coordinate of the lower left corner of the crop box.

This property contains the Y coordinate of the lower left corner of the crop box of the page. The crop box defines the region to which the contents of the page shall be clipped (cropped) when displayed or printed.

PageInfoCropURX[Index]: Defines the X coordinate of the upper right corner of the crop box.

This property contains the X coordinate of the upper right corner of the crop box of the page. The crop box defines the region to which the contents of the page shall be clipped (cropped) when displayed or printed.

PageInfoCropURY[Index]: Defines the Y coordinate of the upper right corner of the crop box.

This property contains the Y coordinate of the upper right corner of the crop box of the page. The crop box defines the region to which the contents of the page shall be clipped (cropped) when displayed or printed.

PageInfoHeight[Index]: The Height of the page.

This property contains the page height value.

PageInfoMediaLLX[Index]: Defines the X coordinate of the lower left corner of the media box.

This property contains the X coordinate of the lower left corner of the media box of the page. The media box defines the boundaries of the physical medium on which the page is to be printed.

PageInfoMediaLLY[Index]: Defines the Y coordinate of the lower left corner of the media box.

This property contains the Y coordinate of the lower left corner of the media box of the page. The media box defines the boundaries of the physical medium on which the page is to be printed.

PageInfoMediaURX[Index]: Defines the X coordinate of the upper right corner of the media box.

This property contains the X coordinate of the upper right corner of the media box of the page. The media box defines the boundaries of the physical medium on which the page is to be printed.

PageInfoMediaURY[Index]: Defines the Y coordinate of the upper right corner of the media box.

This property contains the Y coordinate of the upper right corner of the media box of the page. The media box defines the boundaries of the physical medium on which the page is to be printed.

PageInfoRotate[Index]: The Rotate value of the page.

This property contains the page rotation angle.

PageInfoUserUnit[Index]: Defines the size of default user space units.

This property contains a positive number that shall give the size of default user space units, in multiples of 1/72 inch. The default value is 1.0 (user space unit is 1/72 inch).

PageInfoWidth[Index]: The Width of the page.

This property contains the page width value.

RC4KeyBits: Specifies the number of key bits used for the RC4 algorithm.

Specifies the number of key bits used for the RC4 encryption algorithm.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

XMPMetadataContent: The XMP metadata content.

Use this config property to read or set the XMP metadata content.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (PDFEncryptor Module)

PDFEncryptor Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
26214401	The input file does not exist (`SB_ERROR_PDF_INPUTFILE_NOT_EXISTS`)
26214402	Cannot encrypt already encrypted file (`SB_ERROR_PDF_ENCRYPTED`)
26214403	The file is not encrypted (`SB_ERROR_PDF_NOT_ENCRYPTED`)
26214405	Invalid password (`SB_ERROR_PDF_INVALID_PASSWORD`)
26214406	Failed to decrypt the file (`SB_ERROR_PDF_DECRYPTION_FAILED`)
26214407	The document is signed (`SB_ERROR_PDF_SIGNED`)
26214408	The document is not signed (`SB_ERROR_PDF_NOT_SIGNED`)
26214409	Cannot update this type of signature (`SB_ERROR_PDF_INAPPROPRIATE_SIGNATURE`)
26214410	Unsupported feature or operation (`SB_ERROR_PDF_NOT_SUPPORTED`)
26214411	No timestamp server specified (`SB_ERROR_PDF_NO_TIMESTAMP_SERVER`)
26214412	The component is not in edit mode (`SB_ERROR_PDF_READONLY`)