MessageTimestamper Module

Properties Methods Events Config Settings Errors

The MessageTimestamper module timestamps data and stores it in the PKCS#7 format.

Syntax

SecureBlackbox.MessageTimestamper

Remarks

PKCS#7 (Public Key Cryptography Standard #7) is a common format used to store encrypted and signed data. It is used by a variety of protocols, including S/MIME and CMS.

MessageTimestamper can timestamp binary data. The following output formats are supported: PKCS#7 TimestampedData, PKCS#7 TimestampToken (CMS), and PKCS#7 TSPReply (RFC3161).

The two principal properties that you need to set up are the TimestampServer, which should contain the address of the RFC3161-compliant TSA service, and the TimestampFormat, which should be set to the desired timestamp format.

Provide the input and output destinations via the InputFile and OutputFile properties. Depending on the TSA setup, you may also need to adjust the TLS properties (for example, provide a client certificate via the TLSClientChain collection).

Having set up the component, call the Timestamp method. MessageTimestamper will prepare the timestamp message and request the TSA service to timestamp it.

Note that MessageTimestamper creates standalone timestamps over binary messages. If you would rather timestamp an existing CMS signature, see MessageSigner or CAdESSigner components instead. MessageTimestamper timestamper = new MessageTimestamper(); timestamper.setTimestampFormat(Messagetimestamper.mtfRFC5544); //Configures the desired timestamp format. // Select the file which contains the message that will be timestamped timestamper.setInputFile("message.txt"); // Select the file where the timestamped message will be written timestamper.setOutputFile("timestampedMessage.bin"); // Specify the timestamping server timestamper.setTimestampServer("http://..."); timestamper.timestamp(); // Timestamp

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


DataFileName	A file name to be saved together with the timestamped data.
DataURI	The URI to be included with the timestamped data.
Detached	Specifies whether a detached timestamp should be produced.
FIPSMode	Reserved.
HashAlgorithm	Specifies the hash algorithm to be used.
InputBytes	Use this property to pass the input to module in byte array form.
InputFile	A path to the source file.
InputIsHash	Specifies whether the input source contains the hash of the data or the actual data.
OutputBytes	Use this property to read the output the module object has produced.
OutputFile	A path to the output file.
Proxy	The proxy server settings.
SocketSettings	Manages network connection settings.
TimestampFormat	Configures the desired timestamp format.
TimestampServer	The address of the timestamping server.
TLSClientChain	The TLS client certificate chain.
TLSServerChain	The TLS server's certificate chain.
TLSSettings	Manages TLS layer settings.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
Reset	Resets the module settings.
Timestamp	Timestamps the data.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Error	Information about errors during PKCS#7 message encryption.
Notification	This event notifies the application about an underlying control flow event.
TimestampRequest	Fires when the module is ready to request a timestamp from an external TSA.
TLSCertNeeded	Fires when a remote TLS party requests a client certificate.
TLSCertValidate	This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.
TLSEstablished	Fires when a TLS handshake with Host successfully completes.
TLSHandshake	Fires when a new TLS handshake is initiated, before the handshake commences.
TLSShutdown	Reports the graceful closure of a TLS connection.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


MediaType	Media type.
ProtectMetadata	Protect metadata.
TempPath	Path for storing temporary files.
TimestampResponse	A base16-encoded timestamp response received from a TSA.
TimestampType	TBD.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TspAttemptCount	Specifies the number of timestamping request attempts.
TspHashAlgorithm	Sets a specific hash algorithm for use with the timestamping service.
TspReqPolicy	Sets a request policy ID to include in the timestamping request.
UseUndefSize	Allows or forbids the use of ASN.1 tags of undefined size.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
PKICache	Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.
PKICachePath	Specifies the file system path where cached PKI data is stored.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseCRLObjectCaching	Specifies whether reuse of loaded CRL objects is enabled.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOCSPResponseObjectCaching	Specifies whether reuse of loaded OCSP response objects is enabled.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.
XMLRDNDescriptorName[OID]	Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.
XMLRDNDescriptorPriority[OID]	Specifies the priority of descriptor names associated with a specific OID.
XMLRDNDescriptorReverseOrder	Specifies whether to reverse the order of descriptors in RDN.
XMLRDNDescriptorSeparator	Specifies the separator used between descriptors in RDN.

DataFileName Property (MessageTimestamper Module)

A file name to be saved together with the timestamped data.

public var dataFileName: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=dataFileName,setter=setDataFileName:) NSString* dataFileName;

- (NSString*)dataFileName;
- (void)setDataFileName :(NSString*)newDataFileName;

Default Value

Remarks

Use this property to provide a file name to be stored in the timestamp together with the timestamped data. This is only informational and does not necessarily need to match the file name provided via InputFile.

DataURI Property (MessageTimestamper Module)

The URI to be included with the timestamped data.

Syntax

Swift
Objective-C

public var dataURI: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=dataURI,setter=setDataURI:) NSString* dataURI;

- (NSString*)dataURI;
- (void)setDataURI :(NSString*)newDataURI;

Default Value

Remarks

Use this property to provide a URI to be saved alongside the timestamped data. This value is only informational.

Detached Property (MessageTimestamper Module)

Specifies whether a detached timestamp should be produced.

Syntax

Swift
Objective-C

public var detached: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=detached,setter=setDetached:) BOOL detached;

- (BOOL)detached;
- (void)setDetached :(BOOL)newDetached;

Default Value

False

Remarks

Set this property to true to produce a detached timestamp, i.e. kept separately and alongside the timestamped document.

FIPSMode Property (MessageTimestamper Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

HashAlgorithm Property (MessageTimestamper Module)

Specifies the hash algorithm to be used.

Syntax

Swift
Objective-C

public var hashAlgorithm: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=hashAlgorithm,setter=setHashAlgorithm:) NSString* hashAlgorithm;

- (NSString*)hashAlgorithm;
- (void)setHashAlgorithm :(NSString*)newHashAlgorithm;

Default Value

"SHA256"

Remarks

This property specifies the hash algorithm to used for calculating the signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

InputBytes Property (MessageTimestamper Module)

Use this property to pass the input to module in byte array form.

Syntax

Swift
Objective-C

public var inputBytes: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (MessageTimestamper Module)

A path to the source file.

Syntax

Swift
Objective-C

public var inputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

Remarks

Use this property to provide a path to the file containing the data to be timestamped.

InputIsHash Property (MessageTimestamper Module)

Specifies whether the input source contains the hash of the data or the actual data.

Syntax

Swift
Objective-C

public var inputIsHash: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputIsHash,setter=setInputIsHash:) BOOL inputIsHash;

- (BOOL)inputIsHash;
- (void)setInputIsHash :(BOOL)newInputIsHash;

Default Value

False

Remarks

Use this property to tell the component whether the input source contains the actual data or its hash.

OutputBytes Property (MessageTimestamper Module)

Use this property to read the output the module object has produced.

Syntax

Swift
Objective-C

public var outputBytes: Data {
  get {...}
}


@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (MessageTimestamper Module)

A path to the output file.

Syntax

Swift
Objective-C

public var outputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

Remarks

Use this property to specify the file to save the timestamped message to.

Proxy Property (MessageTimestamper Module)

The proxy server settings.

Syntax

Swift
Objective-C

public var proxy: ProxySettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=proxyAddress,setter=setProxyAddress:) NSString* proxyAddress;

- (NSString*)proxyAddress;
- (void)setProxyAddress :(NSString*)newProxyAddress;

@property (nonatomic,readwrite,assign,getter=proxyAuthentication,setter=setProxyAuthentication:) int proxyAuthentication;

- (int)proxyAuthentication;
- (void)setProxyAuthentication :(int)newProxyAuthentication;

@property (nonatomic,readwrite,assign,getter=proxyPassword,setter=setProxyPassword:) NSString* proxyPassword;

- (NSString*)proxyPassword;
- (void)setProxyPassword :(NSString*)newProxyPassword;

@property (nonatomic,readwrite,assign,getter=proxyPort,setter=setProxyPort:) int proxyPort;

- (int)proxyPort;
- (void)setProxyPort :(int)newProxyPort;

@property (nonatomic,readwrite,assign,getter=proxyProxyType,setter=setProxyProxyType:) int proxyProxyType;

- (int)proxyProxyType;
- (void)setProxyProxyType :(int)newProxyProxyType;

@property (nonatomic,readwrite,assign,getter=proxyRequestHeaders,setter=setProxyRequestHeaders:) NSString* proxyRequestHeaders;

- (NSString*)proxyRequestHeaders;
- (void)setProxyRequestHeaders :(NSString*)newProxyRequestHeaders;

@property (nonatomic,readwrite,assign,getter=proxyResponseBody,setter=setProxyResponseBody:) NSString* proxyResponseBody;

- (NSString*)proxyResponseBody;
- (void)setProxyResponseBody :(NSString*)newProxyResponseBody;

@property (nonatomic,readwrite,assign,getter=proxyResponseHeaders,setter=setProxyResponseHeaders:) NSString* proxyResponseHeaders;

- (NSString*)proxyResponseHeaders;
- (void)setProxyResponseHeaders :(NSString*)newProxyResponseHeaders;

@property (nonatomic,readwrite,assign,getter=proxyUseIPv6,setter=setProxyUseIPv6:) BOOL proxyUseIPv6;

- (BOOL)proxyUseIPv6;
- (void)setProxyUseIPv6 :(BOOL)newProxyUseIPv6;

@property (nonatomic,readwrite,assign,getter=proxyUsername,setter=setProxyUsername:) NSString* proxyUsername;

- (NSString*)proxyUsername;
- (void)setProxyUsername :(NSString*)newProxyUsername;

Default Value

Remarks

Use this property to tune up the proxy server settings.

SocketSettings Property (MessageTimestamper Module)

Manages network connection settings.

Syntax

Swift
Objective-C

public var socketSettings: SocketSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=socketDNSMode,setter=setSocketDNSMode:) int socketDNSMode;

- (int)socketDNSMode;
- (void)setSocketDNSMode :(int)newSocketDNSMode;

@property (nonatomic,readwrite,assign,getter=socketDNSPort,setter=setSocketDNSPort:) int socketDNSPort;

- (int)socketDNSPort;
- (void)setSocketDNSPort :(int)newSocketDNSPort;

@property (nonatomic,readwrite,assign,getter=socketDNSQueryTimeout,setter=setSocketDNSQueryTimeout:) int socketDNSQueryTimeout;

- (int)socketDNSQueryTimeout;
- (void)setSocketDNSQueryTimeout :(int)newSocketDNSQueryTimeout;

@property (nonatomic,readwrite,assign,getter=socketDNSServers,setter=setSocketDNSServers:) NSString* socketDNSServers;

- (NSString*)socketDNSServers;
- (void)setSocketDNSServers :(NSString*)newSocketDNSServers;

@property (nonatomic,readwrite,assign,getter=socketDNSTotalTimeout,setter=setSocketDNSTotalTimeout:) int socketDNSTotalTimeout;

- (int)socketDNSTotalTimeout;
- (void)setSocketDNSTotalTimeout :(int)newSocketDNSTotalTimeout;

@property (nonatomic,readwrite,assign,getter=socketIncomingSpeedLimit,setter=setSocketIncomingSpeedLimit:) int socketIncomingSpeedLimit;

- (int)socketIncomingSpeedLimit;
- (void)setSocketIncomingSpeedLimit :(int)newSocketIncomingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketLocalAddress,setter=setSocketLocalAddress:) NSString* socketLocalAddress;

- (NSString*)socketLocalAddress;
- (void)setSocketLocalAddress :(NSString*)newSocketLocalAddress;

@property (nonatomic,readwrite,assign,getter=socketLocalPort,setter=setSocketLocalPort:) int socketLocalPort;

- (int)socketLocalPort;
- (void)setSocketLocalPort :(int)newSocketLocalPort;

@property (nonatomic,readwrite,assign,getter=socketOutgoingSpeedLimit,setter=setSocketOutgoingSpeedLimit:) int socketOutgoingSpeedLimit;

- (int)socketOutgoingSpeedLimit;
- (void)setSocketOutgoingSpeedLimit :(int)newSocketOutgoingSpeedLimit;

@property (nonatomic,readwrite,assign,getter=socketTimeout,setter=setSocketTimeout:) int socketTimeout;

- (int)socketTimeout;
- (void)setSocketTimeout :(int)newSocketTimeout;

@property (nonatomic,readwrite,assign,getter=socketUseIPv6,setter=setSocketUseIPv6:) BOOL socketUseIPv6;

- (BOOL)socketUseIPv6;
- (void)setSocketUseIPv6 :(BOOL)newSocketUseIPv6;

Default Value

Remarks

Use this property to tune up network connection parameters.

TimestampFormat Property (MessageTimestamper Module)

Configures the desired timestamp format.

Syntax

Swift
Objective-C

public var timestampFormat: MessageTimestamperTimestampFormats {
  get {...}
  set {...}
}

public enum MessageTimestamperTimestampFormats: Int32 {
  case mtfUnknown = 0
  case mtfRFC5544 = 1
  case mtfCMS = 2
  case mtfTSPReply = 3
}


@property (nonatomic,readwrite,assign,getter=timestampFormat,setter=setTimestampFormat:) int timestampFormat;

- (int)timestampFormat;
- (void)setTimestampFormat :(int)newTimestampFormat;

Default Value

Remarks

Use this property to set the format in which you would like to obtain the timestamp.


mtfUnknown	`0`	Unknown or unspecified format
mtfRFC5544	`1`	RFC5544-compliant format, based on PKCS#7 TimeStampedData object
mtfCMS	`2`	A generic RFC3161 timestamp response object (TimeStampToken)
mtfTSPReply	`3`	Same as mtfCMS, but including the auxiliary TSA response wrapper (TimeStampResp)

TimestampServer Property (MessageTimestamper Module)

The address of the timestamping server.

Syntax

Swift
Objective-C

public var timestampServer: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=timestampServer,setter=setTimestampServer:) NSString* timestampServer;

- (NSString*)timestampServer;
- (void)setTimestampServer :(NSString*)newTimestampServer;

Default Value

Remarks

Use this property to provide the address of the Time Stamping Authority (TSA) server to be used for timestamping the signature.

SecureBlackbox supports RFC3161-compliant timestamping servers, available via HTTP or HTTPS.

If your timestamping service enforces credential-based user authentication (basic or digest), you can provide the credentials in the same URL:

http://user:password@timestamp.server.com/TsaService

For TSAs using certificate-based TLS authentication, provide the client certificate via the TLSClientChain property.

If this property is left empty, no timestamp will be added to the signature.

Starting from summer 2021 update (Vol. 2), the virtual timestamping service is supported, which allows you to intervene in the timestamping routine and provide your own handling for the TSA exchange. This may be handy if the service that you are requesting timestamps from uses a non-standard TSP protocol or requires special authentication option.

To employ the virtual service, assign an URI of the following format to this property:

virtual://localhost?hashonly=true&includecerts=true&reqpolicy=1.2.3.4.5&halg=SHA256&ignorenonce=true

Subscribe to Notification event to get notified about the virtualized timestamping event. The EventID of the timestamping event is TimestampRequest. Inside the event handler, read the base16-encoded request from the EventParam parameter and forward it to the timestamping authority. Upon receiving the response, pass it back to the component, encoded in base16, via the TimestampResponse config property:

component.Config("TimestampResponse=308208ab...");

Note that all the exchange with your custom TSA should take place within the same invocation of the Notification event.

The hashonly parameter of the virtual URI tells the component to only return the timestamp message imprint via the EventParam parameter. If set to false, EventParam will contain the complete RFC3161 timestamping request.

The includecerts parameter specifies that the requestCertificates parameter of the timestamping request should be set to true.

The reqpolicy parameter lets you specify the request policy, and the halg parameter specifies the hash algorithm to use for timestamping.

The ignorenonce parameter allows you to switch off client nonce verification to enable compatibility with TSA services that do not support nonce mirroring.

All the parameters are optional.

TLSClientChain Property (MessageTimestamper Module)

The TLS client certificate chain.

Syntax

Swift
Objective-C

public var tlsClientChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSClientCertCount,setter=setTLSClientCertCount:) int TLSClientCertCount;

- (int)TLSClientCertCount;
- (void)setTLSClientCertCount :(int)newTLSClientCertCount;

- (NSData*)TLSClientCertBytes:(int)tLSClientCertIndex;

- (long long)TLSClientCertHandle:(int)tLSClientCertIndex;
- (void)setTLSClientCertHandle:(int)tLSClientCertIndex :(long long)newTLSClientCertHandle;

Default Value

Remarks

Assign a certificate chain to this property to enable TLS client authentication in the class. Note that the client's end-entity certificate should have a private key associated with it.

Use the CertificateStorage or CertificateManager components to import the certificate from a file, system store, or PKCS11 device.

TLSServerChain Property (MessageTimestamper Module)

The TLS server's certificate chain.

Syntax

Swift
Objective-C

public var tlsServerChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=TLSServerCertCount) int TLSServerCertCount;

- (int)TLSServerCertCount;

- (NSData*)TLSServerCertBytes:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertFingerprint:(int)tLSServerCertIndex;

- (long long)TLSServerCertHandle:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertIssuer:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertIssuerRDN:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertKeyAlgorithm:(int)tLSServerCertIndex;

- (int)TLSServerCertKeyBits:(int)tLSServerCertIndex;

- (int)TLSServerCertKeyUsage:(int)tLSServerCertIndex;

- (BOOL)TLSServerCertSelfSigned:(int)tLSServerCertIndex;

- (NSData*)TLSServerCertSerialNumber:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSigAlgorithm:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSubject:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertSubjectRDN:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertValidFrom:(int)tLSServerCertIndex;

- (NSString*)TLSServerCertValidTo:(int)tLSServerCertIndex;

Default Value

Remarks

Use this property to access the certificate chain sent by the TLS server. This property is ready to read when the TLSCertValidate event is fired by the client component.

TLSSettings Property (MessageTimestamper Module)

Manages TLS layer settings.

Syntax

Swift
Objective-C

public var tlsSettings: TLSSettings {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=TLSAutoValidateCertificates,setter=setTLSAutoValidateCertificates:) BOOL TLSAutoValidateCertificates;

- (BOOL)TLSAutoValidateCertificates;
- (void)setTLSAutoValidateCertificates :(BOOL)newTLSAutoValidateCertificates;

@property (nonatomic,readwrite,assign,getter=TLSBaseConfiguration,setter=setTLSBaseConfiguration:) int TLSBaseConfiguration;

- (int)TLSBaseConfiguration;
- (void)setTLSBaseConfiguration :(int)newTLSBaseConfiguration;

@property (nonatomic,readwrite,assign,getter=TLSCiphersuites,setter=setTLSCiphersuites:) NSString* TLSCiphersuites;

- (NSString*)TLSCiphersuites;
- (void)setTLSCiphersuites :(NSString*)newTLSCiphersuites;

@property (nonatomic,readwrite,assign,getter=TLSClientAuth,setter=setTLSClientAuth:) int TLSClientAuth;

- (int)TLSClientAuth;
- (void)setTLSClientAuth :(int)newTLSClientAuth;

@property (nonatomic,readwrite,assign,getter=TLSECCurves,setter=setTLSECCurves:) NSString* TLSECCurves;

- (NSString*)TLSECCurves;
- (void)setTLSECCurves :(NSString*)newTLSECCurves;

@property (nonatomic,readwrite,assign,getter=TLSExtensions,setter=setTLSExtensions:) NSString* TLSExtensions;

- (NSString*)TLSExtensions;
- (void)setTLSExtensions :(NSString*)newTLSExtensions;

@property (nonatomic,readwrite,assign,getter=TLSForceResumeIfDestinationChanges,setter=setTLSForceResumeIfDestinationChanges:) BOOL TLSForceResumeIfDestinationChanges;

- (BOOL)TLSForceResumeIfDestinationChanges;
- (void)setTLSForceResumeIfDestinationChanges :(BOOL)newTLSForceResumeIfDestinationChanges;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedIdentity,setter=setTLSPreSharedIdentity:) NSString* TLSPreSharedIdentity;

- (NSString*)TLSPreSharedIdentity;
- (void)setTLSPreSharedIdentity :(NSString*)newTLSPreSharedIdentity;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKey,setter=setTLSPreSharedKey:) NSString* TLSPreSharedKey;

- (NSString*)TLSPreSharedKey;
- (void)setTLSPreSharedKey :(NSString*)newTLSPreSharedKey;

@property (nonatomic,readwrite,assign,getter=TLSPreSharedKeyCiphersuite,setter=setTLSPreSharedKeyCiphersuite:) NSString* TLSPreSharedKeyCiphersuite;

- (NSString*)TLSPreSharedKeyCiphersuite;
- (void)setTLSPreSharedKeyCiphersuite :(NSString*)newTLSPreSharedKeyCiphersuite;

@property (nonatomic,readwrite,assign,getter=TLSRenegotiationAttackPreventionMode,setter=setTLSRenegotiationAttackPreventionMode:) int TLSRenegotiationAttackPreventionMode;

- (int)TLSRenegotiationAttackPreventionMode;
- (void)setTLSRenegotiationAttackPreventionMode :(int)newTLSRenegotiationAttackPreventionMode;

@property (nonatomic,readwrite,assign,getter=TLSRevocationCheck,setter=setTLSRevocationCheck:) int TLSRevocationCheck;

- (int)TLSRevocationCheck;
- (void)setTLSRevocationCheck :(int)newTLSRevocationCheck;

@property (nonatomic,readwrite,assign,getter=TLSSSLOptions,setter=setTLSSSLOptions:) int TLSSSLOptions;

- (int)TLSSSLOptions;
- (void)setTLSSSLOptions :(int)newTLSSSLOptions;

@property (nonatomic,readwrite,assign,getter=TLSTLSMode,setter=setTLSTLSMode:) int TLSTLSMode;

- (int)TLSTLSMode;
- (void)setTLSTLSMode :(int)newTLSTLSMode;

@property (nonatomic,readwrite,assign,getter=TLSUseExtendedMasterSecret,setter=setTLSUseExtendedMasterSecret:) BOOL TLSUseExtendedMasterSecret;

- (BOOL)TLSUseExtendedMasterSecret;
- (void)setTLSUseExtendedMasterSecret :(BOOL)newTLSUseExtendedMasterSecret;

@property (nonatomic,readwrite,assign,getter=TLSUseSessionResumption,setter=setTLSUseSessionResumption:) BOOL TLSUseSessionResumption;

- (BOOL)TLSUseSessionResumption;
- (void)setTLSUseSessionResumption :(BOOL)newTLSUseSessionResumption;

@property (nonatomic,readwrite,assign,getter=TLSVersions,setter=setTLSVersions:) int TLSVersions;

- (int)TLSVersions;
- (void)setTLSVersions :(int)newTLSVersions;

Default Value

Remarks

Use this property to tune up the TLS layer parameters.

Config Method (MessageTimestamper Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (MessageTimestamper Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

Common ActionIDs:


Action	Parameters	Returned value	Description
ResetTrustedListCache	none	none	Clears the cached list of trusted lists.
ResetCertificateCache	none	none	Clears the cached certificates.
ResetCRLCache	none	none	Clears the cached CRLs.
ResetOCSPResponseCache	none	none	Clears the cached OCSP responses.

Reset Method (MessageTimestamper Module)

Resets the component settings.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

Timestamp Method (MessageTimestamper Module)

Timestamps the data.

Syntax

Swift
Objective-C

public func timestamp() throws -> Void

- (void)timestamp;

Remarks

Call this method to timestamp the content provided in InputFile (or InputStream) with a trusted timestamp from TimestampServer.

Error Event (MessageTimestamper Module)

Information about errors during PKCS#7 message encryption.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the Messages section.

Notification Event (MessageTimestamper Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


BeforeTimestamp	This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings.
TimestampError	This event is only fired if the class failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info.
TimestampRequest	A timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

TimestampRequest Event (MessageTimestamper Module)

Fires when the component is ready to request a timestamp from an external TSA.

Syntax

Swift
Objective-C

func onTimestampRequest(tsa: String, timestampRequest: String, timestampResponse: inout String, suppressDefault: inout Bool)

- (void)onTimestampRequest:(NSString*)TSA :(NSString*)timestampRequest :(NSString**)timestampResponse :(int*)suppressDefault;

Remarks

Subscribe to this event to intercept timestamp requests. You can use it to override timestamping requests and perform them in your code.

The TSA parameter indicates the timestamping service being used. It matches the value passed to the TimestampServer property. Set the SuppressDefault parameter to false if you would like to stop the built-in TSA request from going ahead. The built-in TSA request is also not performed if the returned TimestampResponse parameter is not empty.

TLSCertNeeded Event (MessageTimestamper Module)

Fires when a remote TLS party requests a client certificate.

Syntax

Swift
Objective-C

func onTLSCertNeeded(host: String, caNames: String)

- (void)onTLSCertNeeded:(NSString*)host :(NSString*)CANames;

Remarks

This event fires to notify the implementation that a remote TLS server has requested a client certificate. The Host parameter identifies the host that makes a request, and the CANames parameter (optional, according to the TLS spec) advises on the accepted issuing CAs.

Use the TLSClientChain property in response to this event to provide the requested certificate. Please make sure the client certificate includes the associated private key. Note that you may set the certificates before the connection without waiting for this event to fire.

This event is preceded by the TLSHandshake event for the given host and, if the certificate was accepted, succeeded by the TLSEstablished event.

TLSCertValidate Event (MessageTimestamper Module)

This event is fired upon receipt of the TLS server's certificate, allowing the user to control its acceptance.

Syntax

Swift
Objective-C

func onTLSCertValidate(serverHost: String, serverIP: String, accept: inout Bool)

- (void)onTLSCertValidate:(NSString*)serverHost :(NSString*)serverIP :(int*)accept;

Remarks

This event is fired during a TLS handshake. Use the TLSServerChain property to access the certificate chain. In general, classes may contact a number of TLS endpoints during their work, depending on their configuration.

Accept is assigned in accordance with the outcome of the internal validation check performed by the class, and can be adjusted if needed.

TLSEstablished Event (MessageTimestamper Module)

Fires when a TLS handshake with Host successfully completes.

Syntax

Swift
Objective-C

func onTLSEstablished(host: String, version: String, ciphersuite: String, connectionId: Data, abort: inout Bool)

- (void)onTLSEstablished:(NSString*)host :(NSString*)version :(NSString*)ciphersuite :(NSData*)connectionId :(int*)abort;

Remarks

The class uses this event to notify the application about a successful completion of a TLS handshake.

The Version, Ciphersuite, and ConnectionId parameters indicate the security parameters of the new connection. Use the Abort parameter if you need to terminate the connection at this stage.

TLSHandshake Event (MessageTimestamper Module)

Fires when a new TLS handshake is initiated, before the handshake commences.

Syntax

Swift
Objective-C

func onTLSHandshake(host: String, abort: inout Bool)

- (void)onTLSHandshake:(NSString*)host :(int*)abort;

Remarks

The class uses this event to notify the application about the start of a new TLS handshake to Host. If the handshake is successful, this event will be followed by the TLSEstablished event. If the server chooses to request a client certificate, the TLSCertNeeded event will also be fired.

TLSShutdown Event (MessageTimestamper Module)

Reports the graceful closure of a TLS connection.

Syntax

Swift
Objective-C

func onTLSShutdown(host: String)

- (void)onTLSShutdown:(NSString*)host;

Remarks

This event notifies the application about the closure of an earlier established TLS connection. Note that only graceful connection closures are reported.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

certType
CertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

crlDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

issuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

keyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

privateKeyBytes
Data (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

qualified
Bool (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

subjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

valid
Bool (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

ProxySettings Type

A container for proxy server settings.

Remarks

This type exposes a collection of properties for tuning up the proxy server configuration.

The following fields are available:

Fields

address
String
Default Value: ""

The IP address of the proxy server.

authentication
ProxyAuthTypes
Default Value: 0

The authentication type used by the proxy server.


patNoAuthentication	`0`
patBasic	`1`
patDigest	`2`
patNTLM	`3`

password
String
Default Value: ""

The password to authenticate to the proxy server.

port
Int32
Default Value: 0

The port on the proxy server to connect to.

proxyType
ProxyTypes
Default Value: 0

The type of the proxy server.


cptNone	`0`
cptSocks4	`1`
cptSocks5	`2`
cptWebTunnel	`3`
cptHTTP	`4`

requestHeaders
String
Default Value: ""

Contains HTTP request headers for WebTunnel and HTTP proxy.

responseBody
String
Default Value: ""

Contains the HTTP or HTTPS (WebTunnel) proxy response body.

responseHeaders
String
Default Value: ""

Contains response headers received from an HTTP or HTTPS (WebTunnel) proxy server.

useIPv6
Bool
Default Value: False

Specifies whether IPv6 should be used when connecting through the proxy.

username
String
Default Value: ""

Specifies the username credential for proxy authentication.

Constructors

public init()

Creates a new ProxySettings object.

SocketSettings Type

A container for the socket settings.

Remarks

This type is a container for socket-layer parameters.

The following fields are available:

Fields

dnsMode
DNSResolveModes
Default Value: 0

Selects the DNS resolver to use: the component's (secure) built-in one, or the one provided by the system.


dmAuto	`0`
dmPlatform	`1`
dmOwn	`2`
dmOwnSecure	`3`

dnsPort
Int32
Default Value: 0

Specifies the port number to be used for sending queries to the DNS server.

dnsQueryTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for each DNS query. The value of 0 indicates an infinite timeout.

dnsServers
String
Default Value: ""

The addresses of DNS servers to use for address resolution, separated by commas or semicolons.

dnsTotalTimeout
Int32
Default Value: 0

The timeout (in milliseconds) for the whole resolution process. The value of 0 indicates an infinite timeout.

incomingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to read from the socket, per second.

localAddress
String
Default Value: ""

The local network interface to bind the socket to.

localPort
Int32
Default Value: 0

The local port number to bind the socket to.

outgoingSpeedLimit
Int32
Default Value: 0

The maximum number of bytes to write to the socket, per second.

timeout
Int32
Default Value: 60000

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

useIPv6
Bool
Default Value: False

Enables or disables IP protocol version 6.

Constructors

public init()

Creates a new SocketSettings object.

TLSSettings Type

A container for TLS connection settings.

Remarks

The TLS (Transport Layer Security) protocol provides security for information exchanged over insecure connections such as TCP/IP.

The following fields are available:

AutoValidateCertificates

ForceResumeIfDestinationChanges

PreSharedIdentity

PreSharedKey

PreSharedKeyCiphersuite

RenegotiationAttackPreventionMode

RevocationCheck

SSLOptions

TLSMode

UseExtendedMasterSecret

UseSessionResumption

Versions

Fields

autoValidateCertificates
Bool
Default Value: True

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

baseConfiguration
SecureTransportPredefinedConfigurations
Default Value: 0

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.


stpcDefault	`0`
stpcCompatible	`1`
stpcComprehensiveInsecure	`2`
stpcHighlySecure	`3`

ciphersuites
String
Default Value: ""

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by . Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

NULL_NULL_NULL
RSA_NULL_MD5
RSA_NULL_SHA
RSA_RC4_MD5
RSA_RC4_SHA
RSA_RC2_MD5
RSA_IDEA_MD5
RSA_IDEA_SHA
RSA_DES_MD5
RSA_DES_SHA
RSA_3DES_MD5
RSA_3DES_SHA
RSA_AES128_SHA
RSA_AES256_SHA
DH_DSS_DES_SHA
DH_DSS_3DES_SHA
DH_DSS_AES128_SHA
DH_DSS_AES256_SHA
DH_RSA_DES_SHA
DH_RSA_3DES_SHA
DH_RSA_AES128_SHA
DH_RSA_AES256_SHA
DHE_DSS_DES_SHA
DHE_DSS_3DES_SHA
DHE_DSS_AES128_SHA
DHE_DSS_AES256_SHA
DHE_RSA_DES_SHA
DHE_RSA_3DES_SHA
DHE_RSA_AES128_SHA
DHE_RSA_AES256_SHA
DH_ANON_RC4_MD5
DH_ANON_DES_SHA
DH_ANON_3DES_SHA
DH_ANON_AES128_SHA
DH_ANON_AES256_SHA
RSA_RC2_MD5_EXPORT
RSA_RC4_MD5_EXPORT
RSA_DES_SHA_EXPORT
DH_DSS_DES_SHA_EXPORT
DH_RSA_DES_SHA_EXPORT
DHE_DSS_DES_SHA_EXPORT
DHE_RSA_DES_SHA_EXPORT
DH_ANON_RC4_MD5_EXPORT
DH_ANON_DES_SHA_EXPORT
RSA_CAMELLIA128_SHA
DH_DSS_CAMELLIA128_SHA
DH_RSA_CAMELLIA128_SHA
DHE_DSS_CAMELLIA128_SHA
DHE_RSA_CAMELLIA128_SHA
DH_ANON_CAMELLIA128_SHA
RSA_CAMELLIA256_SHA
DH_DSS_CAMELLIA256_SHA
DH_RSA_CAMELLIA256_SHA
DHE_DSS_CAMELLIA256_SHA
DHE_RSA_CAMELLIA256_SHA
DH_ANON_CAMELLIA256_SHA
PSK_RC4_SHA
PSK_3DES_SHA
PSK_AES128_SHA
PSK_AES256_SHA
DHE_PSK_RC4_SHA
DHE_PSK_3DES_SHA
DHE_PSK_AES128_SHA
DHE_PSK_AES256_SHA
RSA_PSK_RC4_SHA
RSA_PSK_3DES_SHA
RSA_PSK_AES128_SHA
RSA_PSK_AES256_SHA
RSA_SEED_SHA
DH_DSS_SEED_SHA
DH_RSA_SEED_SHA
DHE_DSS_SEED_SHA
DHE_RSA_SEED_SHA
DH_ANON_SEED_SHA
SRP_SHA_3DES_SHA
SRP_SHA_RSA_3DES_SHA
SRP_SHA_DSS_3DES_SHA
SRP_SHA_AES128_SHA
SRP_SHA_RSA_AES128_SHA
SRP_SHA_DSS_AES128_SHA
SRP_SHA_AES256_SHA
SRP_SHA_RSA_AES256_SHA
SRP_SHA_DSS_AES256_SHA
ECDH_ECDSA_NULL_SHA
ECDH_ECDSA_RC4_SHA
ECDH_ECDSA_3DES_SHA
ECDH_ECDSA_AES128_SHA
ECDH_ECDSA_AES256_SHA
ECDHE_ECDSA_NULL_SHA
ECDHE_ECDSA_RC4_SHA
ECDHE_ECDSA_3DES_SHA
ECDHE_ECDSA_AES128_SHA
ECDHE_ECDSA_AES256_SHA
ECDH_RSA_NULL_SHA
ECDH_RSA_RC4_SHA
ECDH_RSA_3DES_SHA
ECDH_RSA_AES128_SHA
ECDH_RSA_AES256_SHA
ECDHE_RSA_NULL_SHA
ECDHE_RSA_RC4_SHA
ECDHE_RSA_3DES_SHA
ECDHE_RSA_AES128_SHA
ECDHE_RSA_AES256_SHA
ECDH_ANON_NULL_SHA
ECDH_ANON_RC4_SHA
ECDH_ANON_3DES_SHA
ECDH_ANON_AES128_SHA
ECDH_ANON_AES256_SHA
RSA_NULL_SHA256
RSA_AES128_SHA256
RSA_AES256_SHA256
DH_DSS_AES128_SHA256
DH_RSA_AES128_SHA256
DHE_DSS_AES128_SHA256
DHE_RSA_AES128_SHA256
DH_DSS_AES256_SHA256
DH_RSA_AES256_SHA256
DHE_DSS_AES256_SHA256
DHE_RSA_AES256_SHA256
DH_ANON_AES128_SHA256
DH_ANON_AES256_SHA256
RSA_AES128_GCM_SHA256
RSA_AES256_GCM_SHA384
DHE_RSA_AES128_GCM_SHA256
DHE_RSA_AES256_GCM_SHA384
DH_RSA_AES128_GCM_SHA256
DH_RSA_AES256_GCM_SHA384
DHE_DSS_AES128_GCM_SHA256
DHE_DSS_AES256_GCM_SHA384
DH_DSS_AES128_GCM_SHA256
DH_DSS_AES256_GCM_SHA384
DH_ANON_AES128_GCM_SHA256
DH_ANON_AES256_GCM_SHA384
ECDHE_ECDSA_AES128_SHA256
ECDHE_ECDSA_AES256_SHA384
ECDH_ECDSA_AES128_SHA256
ECDH_ECDSA_AES256_SHA384
ECDHE_RSA_AES128_SHA256
ECDHE_RSA_AES256_SHA384
ECDH_RSA_AES128_SHA256
ECDH_RSA_AES256_SHA384
ECDHE_ECDSA_AES128_GCM_SHA256
ECDHE_ECDSA_AES256_GCM_SHA384
ECDH_ECDSA_AES128_GCM_SHA256
ECDH_ECDSA_AES256_GCM_SHA384
ECDHE_RSA_AES128_GCM_SHA256
ECDHE_RSA_AES256_GCM_SHA384
ECDH_RSA_AES128_GCM_SHA256
ECDH_RSA_AES256_GCM_SHA384
PSK_AES128_GCM_SHA256
PSK_AES256_GCM_SHA384
DHE_PSK_AES128_GCM_SHA256
DHE_PSK_AES256_GCM_SHA384
RSA_PSK_AES128_GCM_SHA256
RSA_PSK_AES256_GCM_SHA384
PSK_AES128_SHA256
PSK_AES256_SHA384
PSK_NULL_SHA256
PSK_NULL_SHA384
DHE_PSK_AES128_SHA256
DHE_PSK_AES256_SHA384
DHE_PSK_NULL_SHA256
DHE_PSK_NULL_SHA384
RSA_PSK_AES128_SHA256
RSA_PSK_AES256_SHA384
RSA_PSK_NULL_SHA256
RSA_PSK_NULL_SHA384
RSA_CAMELLIA128_SHA256
DH_DSS_CAMELLIA128_SHA256
DH_RSA_CAMELLIA128_SHA256
DHE_DSS_CAMELLIA128_SHA256
DHE_RSA_CAMELLIA128_SHA256
DH_ANON_CAMELLIA128_SHA256
RSA_CAMELLIA256_SHA256
DH_DSS_CAMELLIA256_SHA256
DH_RSA_CAMELLIA256_SHA256
DHE_DSS_CAMELLIA256_SHA256
DHE_RSA_CAMELLIA256_SHA256
DH_ANON_CAMELLIA256_SHA256
ECDHE_ECDSA_CAMELLIA128_SHA256
ECDHE_ECDSA_CAMELLIA256_SHA384
ECDH_ECDSA_CAMELLIA128_SHA256
ECDH_ECDSA_CAMELLIA256_SHA384
ECDHE_RSA_CAMELLIA128_SHA256
ECDHE_RSA_CAMELLIA256_SHA384
ECDH_RSA_CAMELLIA128_SHA256
ECDH_RSA_CAMELLIA256_SHA384
RSA_CAMELLIA128_GCM_SHA256
RSA_CAMELLIA256_GCM_SHA384
DHE_RSA_CAMELLIA128_GCM_SHA256
DHE_RSA_CAMELLIA256_GCM_SHA384
DH_RSA_CAMELLIA128_GCM_SHA256
DH_RSA_CAMELLIA256_GCM_SHA384
DHE_DSS_CAMELLIA128_GCM_SHA256
DHE_DSS_CAMELLIA256_GCM_SHA384
DH_DSS_CAMELLIA128_GCM_SHA256
DH_DSS_CAMELLIA256_GCM_SHA384
DH_anon_CAMELLIA128_GCM_SHA256
DH_anon_CAMELLIA256_GCM_SHA384
ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
ECDH_ECDSA_CAMELLIA128_GCM_SHA256
ECDH_ECDSA_CAMELLIA256_GCM_SHA384
ECDHE_RSA_CAMELLIA128_GCM_SHA256
ECDHE_RSA_CAMELLIA256_GCM_SHA384
ECDH_RSA_CAMELLIA128_GCM_SHA256
ECDH_RSA_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_GCM_SHA256
PSK_CAMELLIA256_GCM_SHA384
DHE_PSK_CAMELLIA128_GCM_SHA256
DHE_PSK_CAMELLIA256_GCM_SHA384
RSA_PSK_CAMELLIA128_GCM_SHA256
RSA_PSK_CAMELLIA256_GCM_SHA384
PSK_CAMELLIA128_SHA256
PSK_CAMELLIA256_SHA384
DHE_PSK_CAMELLIA128_SHA256
DHE_PSK_CAMELLIA256_SHA384
RSA_PSK_CAMELLIA128_SHA256
RSA_PSK_CAMELLIA256_SHA384
ECDHE_PSK_CAMELLIA128_SHA256
ECDHE_PSK_CAMELLIA256_SHA384
ECDHE_PSK_RC4_SHA
ECDHE_PSK_3DES_SHA
ECDHE_PSK_AES128_SHA
ECDHE_PSK_AES256_SHA
ECDHE_PSK_AES128_SHA256
ECDHE_PSK_AES256_SHA384
ECDHE_PSK_NULL_SHA
ECDHE_PSK_NULL_SHA256
ECDHE_PSK_NULL_SHA384
ECDHE_RSA_CHACHA20_POLY1305_SHA256
ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
DHE_RSA_CHACHA20_POLY1305_SHA256
PSK_CHACHA20_POLY1305_SHA256
ECDHE_PSK_CHACHA20_POLY1305_SHA256
DHE_PSK_CHACHA20_POLY1305_SHA256
RSA_PSK_CHACHA20_POLY1305_SHA256
AES128_GCM_SHA256
AES256_GCM_SHA384
CHACHA20_POLY1305_SHA256
AES128_CCM_SHA256
AES128_CCM8_SHA256

clientAuth
ClientAuthTypes
Default Value: 0

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:


ccatNoAuth	`0`
ccatRequestCert	`1`
ccatRequireCert	`2`

ecCurves
String
Default Value: ""

Defines the elliptic curves to enable.

extensions
String
Default Value: ""

Provides access to TLS extensions.

forceResumeIfDestinationChanges
Bool
Default Value: False

Whether to force TLS session resumption when the destination address changes.

preSharedIdentity
String
Default Value: ""

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

preSharedKey
String
Default Value: ""

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

preSharedKeyCiphersuite
String
Default Value: ""

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

renegotiationAttackPreventionMode
RenegotiationAttackPreventionModes
Default Value: 2

Selects the renegotiation attack prevention mechanism.

The following options are available:


crapmCompatible	`0`	TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict	`1`	Renegotiation attack prevention is enabled and enforced.
crapmAuto	`2`	Automatically choose whether to enable or disable renegotiation attack prevention.

revocationCheck
RevocationCheckKinds
Default Value: 1

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.


crcNone	`0`	No revocation checking.
crcAuto	`1`	Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL	`2`	All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP	`3`	All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP	`4`	All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL	`5`	All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP	`6`	All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP	`7`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL	`8`	All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

sslOptions
Int32
Default Value: 16

Various SSL (TLS) protocol options, set of


cssloExpectShutdownMessage	`0x001`	Wait for the close-notify message when shutting down the connection
cssloOpenSSLDTLSWorkaround	`0x002`	(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions
cssloDisableKexLengthAlignment	`0x004`	Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.
cssloForceUseOfClientCertHashAlg	`0x008`	Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.
cssloAutoAddServerNameExtension	`0x010`	Automatically add the server name extension when known
cssloAcceptTrustedSRPPrimesOnly	`0x020`	Accept trusted SRP primes only
cssloDisableSignatureAlgorithmsExtension	`0x040`	Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.
cssloIntolerateHigherProtocolVersions	`0x080`	(server option) Do not allow fallback from TLS versions higher than currently enabled
cssloStickToPrefCertHashAlg	`0x100`	Stick to preferred certificate hash algorithms
cssloNoImplicitTLS12Fallback	`0x200`	Disable implicit TLS 1.3 to 1.2 fallbacks
cssloUseHandshakeBatches	`0x400`	Send the handshake message as large batches rather than individually

tlsMode
SSLModes
Default Value: 0

Specifies the TLS mode to use.


smDefault	`0`
smNoTLS	`1`	Do not use TLS
smExplicitTLS	`2`	Connect to the server without any encryption and then request an SSL session.
smImplicitTLS	`3`	Connect to the specified port, and establish the SSL session at once.
smMixedTLS	`4`	Connect to the specified port, and establish the SSL session at once, but allow plain data.

useExtendedMasterSecret
Bool
Default Value: False

Enables the Extended Master Secret Extension, as defined in RFC 7627.

useSessionResumption
Bool
Default Value: False

Enables or disables the TLS session resumption capability.

versions
Int32
Default Value: 16

The SSL/TLS versions to enable by default.


csbSSL2	`0x01`	SSL 2
csbSSL3	`0x02`	SSL 3
csbTLS1	`0x04`	TLS 1.0
csbTLS11	`0x08`	TLS 1.1
csbTLS12	`0x10`	TLS 1.2
csbTLS13	`0x20`	TLS 1.3

Constructors

public init()

Creates a new TLSSettings object.

Config Settings (MessageTimestamper Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

MessageTimestamper Config Settings

MediaType: Media type.

The media type.

ProtectMetadata: Protect metadata.

Set to true to include the metadata to the timestamp coverage.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TimestampResponse: A base16-encoded timestamp response received from a TSA.

When using virtual:// timestamp endpoints, assign this property in your Notification event handler with the TSP response that you receive from the TSA. Remember to encode the response in hex (base16).

TimestampType: TBD.

TBD

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in the TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via the TLSClientChain property. Note that the class may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to retrieve the validation log of the TLS server.

TspAttemptCount: Specifies the number of timestamping request attempts.

Use this property to specify a number of timestamping request attempts.

In case of a timestamping failure, provide new TSA and HTTP settings inside the Notification event handler ('BeforeTimestamp' and 'TimestampError' event IDs).

TspHashAlgorithm: Sets a specific hash algorithm for use with the timestamping service.

In default configuration class uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp.

Note: Unlike other classs, PDFSigner class uses the same hash algorithm for the main signature and any associated timestamps during signing. Use this property to specify a different hash algorithm for the timestamp.

TspReqPolicy: Sets a request policy ID to include in the timestamping request.

Use this property to provide a specific request policy OID to include in the timestamping request. Use the standard human-readable OID notation (1.2.3.4.5).

UseUndefSize: Allows or forbids the use of ASN.1 tags of undefined size.

Usually PKCS#7 messages are handled correctly when undefined-size tags are used. However some ASN.1 parsers (S/MIME handler in Outlook Express, security plugins of Adobe Acrobat) can't correctly handle such tags. If you are targeting such software, you need this property.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

PKICache: Specifies which PKI elements (certificates, CRLs, OCSP responses) should be cached.

The PKICache setting specifies which Public Key Infrastructure (PKI) elements should be cached to optimize performance and reduce retrieval times. It supports comma-separated values to indicate the specific types of PKI data that should be cached.

Supported Values:


certificate	Enables caching of certificates.
crl	Enables caching of Certificate Revocation Lists (CRLs).
ocsp	Enables caching of OCSP (Online Certificate Status Protocol) responses.

Example (default value): PKICache=certificate,crl,ocsp In this example, the component caches certificates, CRLs, and OCSP responses.

PKICachePath: Specifies the file system path where cached PKI data is stored.

The PKICachePath setting defines the file system path where cached PKI data (e.g., certificates, CRLs, OCSP responses and Trusted Lists) will be stored. This allows the system to persistently save and retrieve PKI cache data, even across application restarts.

The default value is an empty string - no cached PKI data is stored on disk.

Example: PKICachePath=C:\Temp\cache In this example, the cached PKI data is stored in the C:\Temp\cache directory.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseCRLObjectCaching: Specifies whether reuse of loaded CRL objects is enabled.

This setting enables or disables the caching of CRL objects. When set to true (the default value), the system checks if a CRL object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where CRL objects are frequently used.

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOCSPResponseObjectCaching: Specifies whether reuse of loaded OCSP response objects is enabled.

This setting enables or disables the caching of OCSP response objects. When set to true (the default value), the system checks if a OCSP response object is already loaded in memory before attempting to load a new instance. If the object is found, the existing instance is reused, and its reference count is incremented to track its usage. When the reference count reaches zero, indicating that no references to the object remain, the system will free the object from memory. This setting enhances performance by minimizing unnecessary object instantiation and promotes efficient memory management, particularly in scenarios where OCSP response objects are frequently used.

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

XMLRDNDescriptorName[OID]: Defines an OID mapping to descriptor names for the certificate's IssuerRDN or SubjectRDN.

This property defines custom mappings between Object Identifiers (OIDs) and descriptor names. This mapping specifies how the certificate's issuer and subject information (ds:IssuerRDN and ds:SubjectRDN elements respectively) are represented in XML signatures.

The property accepts comma-separated values where the first descriptor name is used when the OID is mapped, and subsequent values act as aliases for parsing.

Syntax: Config("XMLRDNDescriptorName[OID]=PrimaryName,Alias1,Alias2");

Where:

OID: The Object Identifier from the certificate's IssuerRDN or SubjectRDN that you want to map.

PrimaryName: The main descriptor name used in the XML signature when the OID is encountered.

Alias1, Alias2, ...: Optional alternative names recognized during parsing.

Usage Examples:

Map OID 2.5.4.5 to SERIALNUMBER: Config("XMLRDNDescriptorName[2.5.4.5]=SERIALNUMBER");

Map OID 1.2.840.113549.1.9.1 to E, with aliases EMAIL and EMAILADDRESS: Config("XMLRDNDescriptorName[1.2.840.113549.1.9.1]=E,EMAIL,EMAILADDRESS");

XMLRDNDescriptorPriority[OID]: Specifies the priority of descriptor names associated with a specific OID.

This property specifies the priority of descriptor names associated with a specific OID that allows to reorder descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during signing.

XMLRDNDescriptorReverseOrder: Specifies whether to reverse the order of descriptors in RDN.

Specifies whether to reverse the order of descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to true (as specified in RFC 2253, 2.1).

XMLRDNDescriptorSeparator: Specifies the separator used between descriptors in RDN.

Specifies the separator used between descriptors in the ds:IssuerRDN and ds:SubjectRDN elements during XML signing. By default, this property is set to ", " value.

Trappable Errors (MessageTimestamper Module)

MessageTimestamper Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)