OfficeQuickSigner Module

Properties Methods Events Config Settings Errors

The OfficeQuickSigner module signs Office documents in a quick-and-easy manner.

Syntax

SecureBlackbox.OfficeQuickSigner

Remarks

OfficeQuickSigner provides digital signing capabilities of Office documents.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


DocumentFormat	Defines the format of the Office document.
DocumentType	Defines the type of the Office document.
ExternalCrypto	Provides access to external signing and DC parameters.
FIPSMode	Reserved.
HashAlgorithm	Specifies the hash algorithm to be used.
InputBytes	Use this property to pass the input to module in byte array form.
InputFile	The file to be signed.
OutputBytes	Use this property to read the output the module object has produced.
OutputFile	Defines where to save the signed document.
SignatureType	Specifies the type of the signature to be made.
SignCoreProperties	Whether to sign the core properties of the document.
SignDocument	Whether to sign the document itself.
SigningCertificate	The certificate to be used for signing.
SigningChain	The signing certificate chain.
SignSignatureOrigin	Whether to sign the signature origin.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
ExtractAsyncData	Extracts user data from the DC signing service response.
Reset	Resets the module settings.
Sign	Calculates the signature value.
SignAsyncBegin	Initiates the asynchronous signing operation.
SignAsyncEnd	Completes the asynchronous signing operation.
SignExternal	Signs the document using an external signing facility.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Error	Information about errors during signing.
ExternalSign	Handles remote or external signing initiated by the SignExternal method or other source.
Notification	This event notifies the application about an underlying control flow event.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


AddAllDataObjectsTimestamp	Whether to add all data objects timestamp during signing.
AsyncDocumentID	Specifies the document ID for SignAsyncEnd() call.
ChainCurrentCACert	Returns the current CA certificate.
ChainCurrentCert	Returns the certificate that is currently being validated.
ChainCurrentCRL	Returns the current CRL.
ChainCurrentCRLSize	Returns the size of the current CRL.
ChainCurrentOCSP	Returns the current OCSP response.
ChainCurrentOCSPSigner	Returns the signer of the current OCSP object.
ChainInterimDetails	Returns the current interim validation details.
ChainInterimResult	Returns the current interim validation result.
CheckValidityPeriodForTrusted	Whether to check validity period for trusted certificates.
ClaimedRolesXML	The XML content of the claimed roles.
ClaimedRoleText	The text of the claimed role.
CommitmentTypeIndicationAllSignedDataObjects[Index]	Specifies the CommitmentTypeIndication's AllSignedDataObjects.
CommitmentTypeIndicationCount	The number of the CommitmentTypeIndication elements.
CommitmentTypeIndicationIdentifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.
CommitmentTypeIndicationIdentifierDescription[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.
CommitmentTypeIndicationIdentifierDocumentationReferences[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.
CommitmentTypeIndicationIdentifierQualifier[Index]	Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.
CommitmentTypeIndicationObjectReference[Index]	Specifies the CommitmentTypeIndication's ObjectReference.
CommitmentTypeIndicationQualifiersXML[Index]	The XML content of the CommitmentTypeIndication's Qualifiers.
CustomTrustedLists	Specifies the custom TrustedLists.
CustomTSLs	Specifies the custom TrustedLists.
DataObjectFormatCount	The number of the DataObjectFormat elements.
DataObjectFormatDescription[Index]	Specifies the DataObjectFormat's Description.
DataObjectFormatEncoding[Index]	Specifies the DataObjectFormat's Encoding.
DataObjectFormatMimeType[Index]	Specifies the DataObjectFormat's MimeType.
DataObjectFormatObjectIdentifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Identifier.
DataObjectFormatObjectIdentifierDescription[Index]	Specifies the DataObjectFormat's ObjectIdentifier's Description.
DataObjectFormatObjectIdentifierDocumentationReferences[Index]	Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.
DataObjectFormatObjectIdentifierQualifier[Index]	Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.
DataObjectFormatObjectReference[Index]	Specifies the DataObjectFormat's ObjectReference.
DislikeOpenEndedOCSPs	Tells the module to discourage OCSP responses without an explicit NextUpdate parameter.
ExclusiveCanonicalizationPrefix	Specifies the exclusive canonicalization prefix.
ExpireTime	Signature expiration time in UTC.
ForceCompleteChainValidation	Whether to check the CA certificates when the signing certificate is invalid.
ForceCompleteChainValidationForTrusted	Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.
GracePeriod	Specifies a grace period to apply during revocation information checks.
HMACKey	The key value for HMAC.
HMACOutputLength	Sets the length of the HMAC output.
HMACSigningUsed	Whether to use HMAC signing.
IgnoreChainLoops	Whether chain loops should be ignored.
IgnoreChainValidationErrors	Whether to ignore any certificate chain validation issues.
IgnoreOCSPNoCheckExtension	Whether the OCSP NoCheck extension should be ignored.
IgnoreSystemTrust	Whether trusted Windows Certificate Stores should be treated as trusted.
IgnoreTimestampFailure	Whether to ignore time-stamping failure during signing.
ImplicitlyTrustSelfSignedCertificates	Whether to trust self-signed certificates.
IncludeKnownRevocationInfoToSignature	Whether to include custom revocation info to the signature.
InclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList.
KeyInfoID	Specifies the ID for KeyInfo element.
KeyName	Contains information about the key used for signing.
ManifestCount	TBD.
ManifestID[i]	TBD.
ManifestObjectIndex[i]	TBD.
ManifestXML[i]	TBD.
ObjectCount	TBD.
ObjectEncoding[i]	TBD.
ObjectID[i]	TBD.
ObjectMimeType[i]	TBD.
ObjectSignaturePropertiesCount	TBD.
ObjectSignaturePropertiesID[i]	TBD.
ObjectSignaturePropertiesObjectIndex[i]	TBD.
ObjectSignaturePropertiesXML[i]	TBD.
ObjectSignaturePropertyCount	TBD.
ObjectSignaturePropertyID[i]	TBD.
ObjectSignaturePropertyPropertiesIndex[i]	TBD.
ObjectSignaturePropertyTarget[i]	TBD.
ObjectSignaturePropertyXML[i]	TBD.
ObjectXML[i]	TBD.
PolicyDescription	signature policy description.
PolicyDescription	signature policy description.
PolicyExplicitText	The explicit text of the user notice.
PolicyExplicitText	The explicit text of the user notice.
PolicyUNNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
PolicyUNOrganization	The organization part of the NoticeReference qualifier.
PolicyUNOrganization	The organization part of the NoticeReference qualifier.
ProductionPlace	Identifies the place of the signature production.
ProductionPlace	Identifies the place of the signature production.
PromoteLongOCSPResponses	Whether long OCSP responses are requested.
PSSUsed	Whether to use RSASSA-PSS algorithm.
PSSUsed	Whether to use RSASSA-PSS algorithm.
QualifyingPropertiesID	Specifies the ID for QualifyingProperties element.
QualifyingPropertiesObjectID	Specifies the ID for object with QualifyingProperties element.
QualifyingPropertiesReferenceCount	The number of the QualifyingPropertiesReference elements.
QualifyingPropertiesReferenceID[Index]	Specifies the QualifyingPropertiesReference's ID.
QualifyingPropertiesReferenceURI[Index]	Specifies the QualifyingPropertiesReference's URI.
RefsTimestampType	Specifies references timestamp type to include to the signature.
SchemeParams	The algorithm scheme parameters to employ.
SignatureID	Specifies the ID for Signature element.
SignatureInfoAddress1	Specifies the location at which the signature was created.
SignatureInfoAddress2	Specifies the location at which the signature was created.
SignatureInfoComments	Comments to the signature info text.
SignatureInfoDelegateSuggestedSigner	Specifies the name of a person.
SignatureInfoDelegateSuggestedSigner2	Specifies the title of a person.
SignatureInfoDelegateSuggestedSignerEmail	Specifies the e-mail address of a person.
SignatureInfoImage	Specifies an image for the digital signature.
SignatureInfoIncluded	Whether to include the signature info.
SignatureInfoInvalidLnImage	Specifies the image of an invalid signature.
SignatureInfoSignatureType	Specifies the type of the digital signature.
SignatureInfoText	The text to be displayed as the signature info.
SignatureInfoValidLnImage	Specifies the image of a valid signature.
SignatureLineAdditionalSignatureInfo[Index]	Contains additional signature information.
SignatureLineAllowComments[Index]	Indicates if comments are allowed.
SignatureLineCount	The number of signature lines.
SignatureLineId[Index]	Contains signature unique ID.
SignatureLineImageData[Index]	Contains signature image.
SignatureLineIndex	Specifies the index of the signature line to sign.
SignatureLineShowSignDate[Index]	Indicates if signing date should be shown.
SignatureLineSignatureIndex[Index]	The index of the signature that signs signature line.
SignatureLineSignatureProviderId[Index]	Contains signature provider ID.
SignatureLineSignatureProviderUrl[Index]	Contains signature provider URL.
SignatureLineSigned[Index]	Indicates if signature line is signed.
SignatureLineSigningInstructions[Index]	Contains signing instructions.
SignatureLineSuggestedSigner2[Index]	Suggested signer line two.
SignatureLineSuggestedSigner[Index]	Suggested signer line one.
SignatureLineSuggestedSignerEmail[Index]	Suggested signer email address.
SignatureOriginPartURI	Contains the signature origin part URI element.
SignaturePartName	Name of signature part.
SignaturePrefix	Specifies the signature prefix.
SignatureValueID	Specifies the ID for SignatureValue element.
SignedInfoID	Specifies the ID for SignedInfo element.
SignedPropertiesID	Specifies the ID for SignedProperties element.
SignedPropertiesReferenceCanonicalizationMethod	Specifies the canonicalization method used in SignedProperties reference.
SignedPropertiesReferenceHashAlgorithm	Specifies the hash algorithm used in SignedProperties reference.
SignedPropertiesReferenceID	Specifies the ID for Reference element that points to SignedProperties element.
SignedPropertiesReferenceInclusiveNamespacesPrefixList	Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.
SignedPropertiesReferenceIndex	Specifies the index of SignedProperties reference.
SignedSignaturePropertiesID	Specifies the ID for SignedSignatureProperties element.
SigningCertificatesChain	The indicator of which certificates should be/are included as the signing chain.
SigningCertificatesHashAlgorithm	Specifies the hash algorithm used for SigningCertificates.
SignTime	Specifies the signing time in UTC.
SigPolicyDescription	signature policy description.
SigPolicyDescription	signature policy description.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyExplicitText	The explicit text of the user notice.
SigPolicyHash	The EPES policy hash.
SigPolicyHash	The EPES policy hash.
SigPolicyHashAlgorithm	The hash algorithm that was used to generate the EPES policy hash.
SigPolicyHashAlgorithm	The hash algorithm that was used to generate the EPES policy hash.
SigPolicyID	The EPES policy ID.
SigPolicyID	The EPES policy ID.
SigPolicyNoticeNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
SigPolicyNoticeNumbers	The noticeNumbers part of the NoticeReference CAdES attribute.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyNoticeOrganization	The organization part of the NoticeReference qualifier.
SigPolicyURI	The EPES policy URI.
SigPolicyURI	The EPES policy URI.
TempPath	Path for storing temporary files.
TimestampCanonicalizationMethod	Specifies canonicalization method used in timestamp.
TimestampResponse	A base16-encoded timestamp response received from a TSA.
TimestampValidationDataDetails	Specifies timestamp validation data details to include to the signature.
TLSChainValidationDetails	Contains the advanced details of the TLS server certificate validation.
TLSChainValidationResult	Contains the result of the TLS server certificate validation.
TLSClientAuthRequested	Indicates whether the TLS server requests client authentication.
TLSValidationLog	Contains the log of the TLS server certificate validation.
TolerateMinorChainIssues	Whether to tolerate minor chain issues.
TspAttemptCount	Specifies the number of timestamping request attempts.
TspHashAlgorithm	Sets a specific hash algorithm for use with the timestamping service.
TspReqPolicy	Sets a request policy ID to include in the timestamping request.
UseDefaultTrustedLists	Enables or disables the use of the default TrustedLists.
UseDefaultTSLs	Enables or disables the use of the default TrustedLists.
UseHMACSigning	Whether to use HMAC signing.
UseHMACSigning	Whether to use HMAC signing.
UseMicrosoftCTL	Enables or disables the automatic use of the Microsoft online certificate trust list.
UsePSS	Whether to use RSASSA-PSS algorithm.
UsePSS	Whether to use RSASSA-PSS algorithm.
UseSystemCertificates	Enables or disables the use of the system certificates.
UseValidationCache	Enables or disable the use of the product-wide certificate chain validation cache.
UseValidatorSettingsForTLSValidation	Whether to employ the primary chain validator setup for auxiliary TLS chain validations.
ValidationDataRefsDetails	Specifies validation data references details to include to the signature.
ValidationDataRefsHashAlgorithm	Specifies the hash algorithm used in validation data references.
ValidationDataValuesDetails	Specifies validation data values details to include to the signature.
XAdESPrefix	Specifies the XAdES prefix.
XAdESv141Prefix	Specifies the XAdES v1.4.1 prefix.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

DocumentFormat Property (OfficeQuickSigner Module)

Defines the format of the Office document.

public var documentFormat: OfficeQuickSignerDocumentFormats {
  get {...}
}

public enum OfficeQuickSignerDocumentFormats: Int32 {
  case odfUnknown = 0
  case odfBinary = 1
  case odfOpenXML = 2
  case odfOpenXPS = 3
  case odfOpenDocument = 4
}


@property (nonatomic,readonly,assign,getter=documentFormat) int documentFormat;

- (int)documentFormat;

Default Value

Remarks

This property contains the Office document format.


odfUnknown	`0`	Unknown document format
odfBinary	`1`	Binary Office document
odfOpenXML	`2`	OpenXML Office document
odfOpenXPS	`3`	OpenXPS document
odfOpenDocument	`4`	OpenOffice document

This property is read-only.

DocumentType Property (OfficeQuickSigner Module)

Defines the type of the Office document.

Syntax

Swift
Objective-C

public var documentType: String {
  get {...}
}


@property (nonatomic,readonly,assign,getter=documentType) NSString* documentType;

- (NSString*)documentType;

Default Value

Remarks

This property contains the Office document type.

This property is read-only.

ExternalCrypto Property (OfficeQuickSigner Module)

Provides access to external signing and DC parameters.

Syntax

Swift
Objective-C

public var externalCrypto: ExternalCrypto {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=externalCryptoAsyncDocumentID,setter=setExternalCryptoAsyncDocumentID:) NSString* externalCryptoAsyncDocumentID;

- (NSString*)externalCryptoAsyncDocumentID;
- (void)setExternalCryptoAsyncDocumentID :(NSString*)newExternalCryptoAsyncDocumentID;

@property (nonatomic,readwrite,assign,getter=externalCryptoCustomParams,setter=setExternalCryptoCustomParams:) NSString* externalCryptoCustomParams;

- (NSString*)externalCryptoCustomParams;
- (void)setExternalCryptoCustomParams :(NSString*)newExternalCryptoCustomParams;

@property (nonatomic,readwrite,assign,getter=externalCryptoData,setter=setExternalCryptoData:) NSString* externalCryptoData;

- (NSString*)externalCryptoData;
- (void)setExternalCryptoData :(NSString*)newExternalCryptoData;

@property (nonatomic,readwrite,assign,getter=externalCryptoExternalHashCalculation,setter=setExternalCryptoExternalHashCalculation:) BOOL externalCryptoExternalHashCalculation;

- (BOOL)externalCryptoExternalHashCalculation;
- (void)setExternalCryptoExternalHashCalculation :(BOOL)newExternalCryptoExternalHashCalculation;

@property (nonatomic,readwrite,assign,getter=externalCryptoHashAlgorithm,setter=setExternalCryptoHashAlgorithm:) NSString* externalCryptoHashAlgorithm;

- (NSString*)externalCryptoHashAlgorithm;
- (void)setExternalCryptoHashAlgorithm :(NSString*)newExternalCryptoHashAlgorithm;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeyID,setter=setExternalCryptoKeyID:) NSString* externalCryptoKeyID;

- (NSString*)externalCryptoKeyID;
- (void)setExternalCryptoKeyID :(NSString*)newExternalCryptoKeyID;

@property (nonatomic,readwrite,assign,getter=externalCryptoKeySecret,setter=setExternalCryptoKeySecret:) NSString* externalCryptoKeySecret;

- (NSString*)externalCryptoKeySecret;
- (void)setExternalCryptoKeySecret :(NSString*)newExternalCryptoKeySecret;

@property (nonatomic,readwrite,assign,getter=externalCryptoMethod,setter=setExternalCryptoMethod:) int externalCryptoMethod;

- (int)externalCryptoMethod;
- (void)setExternalCryptoMethod :(int)newExternalCryptoMethod;

@property (nonatomic,readwrite,assign,getter=externalCryptoMode,setter=setExternalCryptoMode:) int externalCryptoMode;

- (int)externalCryptoMode;
- (void)setExternalCryptoMode :(int)newExternalCryptoMode;

@property (nonatomic,readwrite,assign,getter=externalCryptoPublicKeyAlgorithm,setter=setExternalCryptoPublicKeyAlgorithm:) NSString* externalCryptoPublicKeyAlgorithm;

- (NSString*)externalCryptoPublicKeyAlgorithm;
- (void)setExternalCryptoPublicKeyAlgorithm :(NSString*)newExternalCryptoPublicKeyAlgorithm;

Default Value

False

Remarks

Use this property to tune-up remote cryptography settings. SecureBlackbox supports two independent types of external cryptography: synchronous (based on the ExternalSign event) and asynchronous (based on the DC protocol and the DCAuth signing component).

FIPSMode Property (OfficeQuickSigner Module)

Reserved.

Syntax

Swift
Objective-C

public var fipsMode: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=FIPSMode,setter=setFIPSMode:) BOOL FIPSMode;

- (BOOL)FIPSMode;
- (void)setFIPSMode :(BOOL)newFIPSMode;

Default Value

False

Remarks

This property is reserved for future use.

HashAlgorithm Property (OfficeQuickSigner Module)

Specifies the hash algorithm to be used.

Syntax

Swift
Objective-C

public var hashAlgorithm: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=hashAlgorithm,setter=setHashAlgorithm:) NSString* hashAlgorithm;

- (NSString*)hashAlgorithm;
- (void)setHashAlgorithm :(NSString*)newHashAlgorithm;

Default Value

"SHA256"

Remarks

Use this property to set the hash algorithm for signature calculation.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

InputBytes Property (OfficeQuickSigner Module)

Use this property to pass the input to module in byte array form.

Syntax

Swift
Objective-C

public var inputBytes: Data {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputBytes,setter=setInputBytes:) NSData* inputBytes;

- (NSData*)inputBytes;
- (void)setInputBytes :(NSData*)newInputBytes;

Remarks

Assign a byte array containing the data to be processed to this property.

InputFile Property (OfficeQuickSigner Module)

The file to be signed.

Syntax

Swift
Objective-C

public var inputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=inputFile,setter=setInputFile:) NSString* inputFile;

- (NSString*)inputFile;
- (void)setInputFile :(NSString*)newInputFile;

Default Value

Remarks

Provide the path to the Office document to be signed.

OutputBytes Property (OfficeQuickSigner Module)

Use this property to read the output the module object has produced.

Syntax

Swift
Objective-C

public var outputBytes: Data {
  get {...}
}


@property (nonatomic,readonly,assign,getter=outputBytes) NSData* outputBytes;

- (NSData*)outputBytes;

Remarks

Read the contents of this property after the operation has completed to read the produced output. This property will only be set if the OutputFile and OutputStream properties had not been assigned.

This property is read-only.

OutputFile Property (OfficeQuickSigner Module)

Defines where to save the signed document.

Syntax

Swift
Objective-C

public var outputFile: String {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=outputFile,setter=setOutputFile:) NSString* outputFile;

- (NSString*)outputFile;
- (void)setOutputFile :(NSString*)newOutputFile;

Default Value

Remarks

Specifies the path where the signed Office document should be saved.

SignatureType Property (OfficeQuickSigner Module)

Specifies the type of the signature to be made.

Syntax

Swift
Objective-C

public var signatureType: OfficeQuickSignerSignatureTypes {
  get {...}
  set {...}
}

public enum OfficeQuickSignerSignatureTypes: Int32 {
  case ostDefault = 0
  case ostBinaryCryptoAPI = 1
  case ostBinaryXML = 2
  case ostOpenXML = 3
  case ostOpenXPS = 4
  case ostOpenDocument = 5
}


@property (nonatomic,readwrite,assign,getter=signatureType,setter=setSignatureType:) int signatureType;

- (int)signatureType;
- (void)setSignatureType :(int)newSignatureType;

Default Value

Remarks

Use this property to define what kind of signature should be made over the document.


ostDefault	`0`
ostBinaryCryptoAPI	`1`
ostBinaryXML	`2`
ostOpenXML	`3`
ostOpenXPS	`4`
ostOpenDocument	`5`

SignCoreProperties Property (OfficeQuickSigner Module)

Whether to sign the core properties of the document.

Syntax

Swift
Objective-C

public var signCoreProperties: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=signCoreProperties,setter=setSignCoreProperties:) BOOL signCoreProperties;

- (BOOL)signCoreProperties;
- (void)setSignCoreProperties :(BOOL)newSignCoreProperties;

Default Value

False

Remarks

The core properties are a set of elements that describe common and well-known properties of the Office document package such as creator, version, revision, etc.

SignDocument Property (OfficeQuickSigner Module)

Whether to sign the document itself.

Syntax

Swift
Objective-C

public var signDocument: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=signDocument,setter=setSignDocument:) BOOL signDocument;

- (BOOL)signDocument;
- (void)setSignDocument :(BOOL)newSignDocument;

Default Value

True

Remarks

Use this property to specify whether the signature should be computed over the document itself.

SigningCertificate Property (OfficeQuickSigner Module)

The certificate to be used for signing.

Syntax

Swift
Objective-C

public var signingCertificate: Certificate {
  get {...}
  set {...}
}


@property (nonatomic,readonly,assign,getter=signingCertBytes) NSData* signingCertBytes;

- (NSData*)signingCertBytes;

@property (nonatomic,readwrite,assign,getter=signingCertHandle,setter=setSigningCertHandle:) long long signingCertHandle;

- (long long)signingCertHandle;
- (void)setSigningCertHandle :(long long)newSigningCertHandle;

Default Value

False

Remarks

Use this property to specify the certificate that shall be used for signing the data. Note that this certificate should have a private key associated with it. Use SigningChain to supply the rest of the certificate chain for inclusion into the signature.

SigningChain Property (OfficeQuickSigner Module)

The signing certificate chain.

Syntax

Swift
Objective-C

public var signingChain: Array<Certificate> {
  get {...}
}


@property (nonatomic,readwrite,assign,getter=signingChainCount,setter=setSigningChainCount:) int signingChainCount;

- (int)signingChainCount;
- (void)setSigningChainCount :(int)newSigningChainCount;

- (NSData*)signingChainBytes:(int)signingChainIndex;

- (long long)signingChainHandle:(int)signingChainIndex;
- (void)setSigningChainHandle:(int)signingChainIndex :(long long)newSigningChainHandle;

Default Value

False

Remarks

Use this property to provide the chain for the signing certificate. Use the SigningCertificate property, if it is available, to provide the signing certificate itself.

SignSignatureOrigin Property (OfficeQuickSigner Module)

Whether to sign the signature origin.

Syntax

Swift
Objective-C

public var signSignatureOrigin: Bool {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=signSignatureOrigin,setter=setSignSignatureOrigin:) BOOL signSignatureOrigin;

- (BOOL)signSignatureOrigin;
- (void)setSignSignatureOrigin :(BOOL)newSignSignatureOrigin;

Default Value

False

Remarks

Specifies whether to sign the XPS document's signature origin.

Config Method (OfficeQuickSigner Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (OfficeQuickSigner Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExtractAsyncData Method (OfficeQuickSigner Module)

Extracts user data from the DC signing service response.

Syntax

Swift
Objective-C

public func extractAsyncData(asyncReply: String) throws -> String

- (NSString*)extractAsyncData:(NSString*)asyncReply;

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

Reset Method (OfficeQuickSigner Module)

Resets the component settings.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Reset is a generic method available in every class.

Sign Method (OfficeQuickSigner Module)

Calculates the signature value.

Syntax

Swift
Objective-C

public func sign() throws -> Void

- (void)sign;

Remarks

Call this method to generate a signature over the document.

SignAsyncBegin Method (OfficeQuickSigner Module)

Initiates the asynchronous signing operation.

Syntax

Swift
Objective-C

public func signAsyncBegin() throws -> String

- (NSString*)signAsyncBegin;

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in OutputFile (or OutputStream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to InputFile (or InputStream), and call SignAsyncEnd to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to SignAsyncEnd and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the SignAsyncBegin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the SignAsyncEnd method.

SignAsyncEnd Method (OfficeQuickSigner Module)

Completes the asynchronous signing operation.

Syntax

Swift
Objective-C

public func signAsyncEnd(asyncReply: String) throws -> Void

- (void)signAsyncEnd:(NSString*)asyncReply;

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior SignAsyncBegin call to InputFile (or InputStream). The method will embed the signature into the pre-signed document, and save the complete signed document to OutputFile (or OutputStream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the SigningCertificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (SignAsyncBegin) stage.

SignExternal Method (OfficeQuickSigner Module)

Signs the document using an external signing facility.

Syntax

Swift
Objective-C

public func signExternal() throws -> Void

- (void)signExternal;

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires ExternalSign event which allows to pass the hash value for signing.

Error Event (OfficeQuickSigner Module)

Information about errors during signing.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

This event is fired in case of exceptional conditions during the office document processing.

ErrorCode contains an error code and Description contains a textual description of the error.

ExternalSign Event (OfficeQuickSigner Module)

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

Swift
Objective-C

func onExternalSign(operationId: String, hashAlgorithm: String, pars: String, data: String, signedData: inout String)

- (void)onExternalSign:(NSString*)operationId :(NSString*)hashAlgorithm :(NSString*)pars :(NSString*)data :(NSString**)signedData;

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

Notification Event (OfficeQuickSigner Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:


DocumentLoaded	Reports the completion of Office document processing by the component. Use the event handler to access document-related information. The EventParam value passed with this EventID is empty.
RetrieveQualifyingProperties	TBD
SignaturesLoaded	Notifies the application that the component has finished loading signatures.
BeforeTimestamp	This event is fired before a timestamp is requested from the timestamping authority. Use the event handler to modify TSA and HTTP settings.
TimestampError	This event is only fired if the class failed to obtain a timestamp from the timestamping authority. The EventParam parameter contains extended error info.
TimestampRequest	A timestamp is requested from the custom timestamping authority. This event is only fired if TimestampServer was set to a virtual:// URI. The EventParam parameter contains the TSP request (or the plain hash, depending on the value provided to TimestampServer), in base16, that needs to be sent to the TSA. Use the event handler to send the request to the TSA. Upon receiving the response, assign it, in base16, to the TimestampResponse configuration property.

Certificate Type

Encapsulates an individual X.509 certificate.

Remarks

This type keeps and provides access to X.509 certificate details.

The following fields are available:

Fields

bytes
Data (read-only)
Default Value: ""

Returns the raw certificate data in DER format.

ca
Bool
Default Value: False

Indicates whether the certificate has a CA capability. For the certificate to be considered a CA, it must have its Basic Constraints extension set with the CA indicator enabled.

Set this property when generating a new certificate to have its Basic Constraints extension generated automatically.

caKeyID
Data (read-only)
Default Value: ""

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

certType
CertTypes (read-only)
Default Value: 0

Returns the type of the entity contained in the Certificate object.

A Certificate object can contain two types of cryptographic objects: a ready-to-use X.509 certificate, or a certificate request ("an unsigned certificate"). Certificate requests can be upgraded to full certificates by signing them with a CA certificate.

Use the CertificateManager class to load or create new certificate and certificate requests objects.

crlDistributionPoints
String
Default Value: ""

Contains a list of locations of CRL distribution points used to check this certificate's validity. The list is taken from the respective certificate extension.

Use this property when generating a certificate to provide a list of CRL endpoints that should be made part of the new certificate.

The endpoints are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

curve
String
Default Value: ""

Specifies the elliptic curve associated with the certificate's public key. This setting only applies to certificates containing EC keys.


SB_EC_SECP112R1	`SECP112R1`
SB_EC_SECP112R2	`SECP112R2`
SB_EC_SECP128R1	`SECP128R1`
SB_EC_SECP128R2	`SECP128R2`
SB_EC_SECP160K1	`SECP160K1`
SB_EC_SECP160R1	`SECP160R1`
SB_EC_SECP160R2	`SECP160R2`
SB_EC_SECP192K1	`SECP192K1`
SB_EC_SECP192R1	`SECP192R1`
SB_EC_SECP224K1	`SECP224K1`
SB_EC_SECP224R1	`SECP224R1`
SB_EC_SECP256K1	`SECP256K1`
SB_EC_SECP256R1	`SECP256R1`
SB_EC_SECP384R1	`SECP384R1`
SB_EC_SECP521R1	`SECP521R1`
SB_EC_SECT113R1	`SECT113R1`
SB_EC_SECT113R2	`SECT113R2`
SB_EC_SECT131R1	`SECT131R1`
SB_EC_SECT131R2	`SECT131R2`
SB_EC_SECT163K1	`SECT163K1`
SB_EC_SECT163R1	`SECT163R1`
SB_EC_SECT163R2	`SECT163R2`
SB_EC_SECT193R1	`SECT193R1`
SB_EC_SECT193R2	`SECT193R2`
SB_EC_SECT233K1	`SECT233K1`
SB_EC_SECT233R1	`SECT233R1`
SB_EC_SECT239K1	`SECT239K1`
SB_EC_SECT283K1	`SECT283K1`
SB_EC_SECT283R1	`SECT283R1`
SB_EC_SECT409K1	`SECT409K1`
SB_EC_SECT409R1	`SECT409R1`
SB_EC_SECT571K1	`SECT571K1`
SB_EC_SECT571R1	`SECT571R1`
SB_EC_PRIME192V1	`PRIME192V1`
SB_EC_PRIME192V2	`PRIME192V2`
SB_EC_PRIME192V3	`PRIME192V3`
SB_EC_PRIME239V1	`PRIME239V1`
SB_EC_PRIME239V2	`PRIME239V2`
SB_EC_PRIME239V3	`PRIME239V3`
SB_EC_PRIME256V1	`PRIME256V1`
SB_EC_C2PNB163V1	`C2PNB163V1`
SB_EC_C2PNB163V2	`C2PNB163V2`
SB_EC_C2PNB163V3	`C2PNB163V3`
SB_EC_C2PNB176W1	`C2PNB176W1`
SB_EC_C2TNB191V1	`C2TNB191V1`
SB_EC_C2TNB191V2	`C2TNB191V2`
SB_EC_C2TNB191V3	`C2TNB191V3`
SB_EC_C2ONB191V4	`C2ONB191V4`
SB_EC_C2ONB191V5	`C2ONB191V5`
SB_EC_C2PNB208W1	`C2PNB208W1`
SB_EC_C2TNB239V1	`C2TNB239V1`
SB_EC_C2TNB239V2	`C2TNB239V2`
SB_EC_C2TNB239V3	`C2TNB239V3`
SB_EC_C2ONB239V4	`C2ONB239V4`
SB_EC_C2ONB239V5	`C2ONB239V5`
SB_EC_C2PNB272W1	`C2PNB272W1`
SB_EC_C2PNB304W1	`C2PNB304W1`
SB_EC_C2TNB359V1	`C2TNB359V1`
SB_EC_C2PNB368W1	`C2PNB368W1`
SB_EC_C2TNB431R1	`C2TNB431R1`
SB_EC_NISTP192	`NISTP192`
SB_EC_NISTP224	`NISTP224`
SB_EC_NISTP256	`NISTP256`
SB_EC_NISTP384	`NISTP384`
SB_EC_NISTP521	`NISTP521`
SB_EC_NISTB163	`NISTB163`
SB_EC_NISTB233	`NISTB233`
SB_EC_NISTB283	`NISTB283`
SB_EC_NISTB409	`NISTB409`
SB_EC_NISTB571	`NISTB571`
SB_EC_NISTK163	`NISTK163`
SB_EC_NISTK233	`NISTK233`
SB_EC_NISTK283	`NISTK283`
SB_EC_NISTK409	`NISTK409`
SB_EC_NISTK571	`NISTK571`
SB_EC_GOSTCPTEST	`GOSTCPTEST`
SB_EC_GOSTCPA	`GOSTCPA`
SB_EC_GOSTCPB	`GOSTCPB`
SB_EC_GOSTCPC	`GOSTCPC`
SB_EC_GOSTCPXCHA	`GOSTCPXCHA`
SB_EC_GOSTCPXCHB	`GOSTCPXCHB`
SB_EC_BRAINPOOLP160R1	`BRAINPOOLP160R1`
SB_EC_BRAINPOOLP160T1	`BRAINPOOLP160T1`
SB_EC_BRAINPOOLP192R1	`BRAINPOOLP192R1`
SB_EC_BRAINPOOLP192T1	`BRAINPOOLP192T1`
SB_EC_BRAINPOOLP224R1	`BRAINPOOLP224R1`
SB_EC_BRAINPOOLP224T1	`BRAINPOOLP224T1`
SB_EC_BRAINPOOLP256R1	`BRAINPOOLP256R1`
SB_EC_BRAINPOOLP256T1	`BRAINPOOLP256T1`
SB_EC_BRAINPOOLP320R1	`BRAINPOOLP320R1`
SB_EC_BRAINPOOLP320T1	`BRAINPOOLP320T1`
SB_EC_BRAINPOOLP384R1	`BRAINPOOLP384R1`
SB_EC_BRAINPOOLP384T1	`BRAINPOOLP384T1`
SB_EC_BRAINPOOLP512R1	`BRAINPOOLP512R1`
SB_EC_BRAINPOOLP512T1	`BRAINPOOLP512T1`
SB_EC_CURVE25519	`CURVE25519`
SB_EC_CURVE448	`CURVE448`

fingerprint
String (read-only)
Default Value: ""

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

friendlyName
String (read-only)
Default Value: ""

Contains an associated alias (friendly name) of the certificate. The friendly name is not a property of a certificate: it is maintained by the certificate media rather than being included in its DER representation. Windows certificate stores are one example of media that does support friendly names.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

hashAlgorithm
String
Default Value: ""

Provides means to set the hash algorithm to be used in the subsequent operation on the certificate (such as generation or key signing). It is not a property of a certificate; use to find out the hash algorithm that is part of the certificate signature.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

issuer
String (read-only)
Default Value: ""

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via .

issuerRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

keyAlgorithm
String
Default Value: "0"

Specifies the public key algorithm of this certificate.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Use the , , and properties to get more details about the key the certificate contains.

keyBits
Int32 (read-only)
Default Value: 0

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the or property would typically contain auxiliary values, and therefore be longer.

keyFingerprint
String (read-only)
Default Value: ""

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

keyUsage
Int32
Default Value: 0

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:


ckuUnknown	`0x00000`	Unknown key usage
ckuDigitalSignature	`0x00001`	Digital signature
ckuNonRepudiation	`0x00002`	Non-repudiation
ckuKeyEncipherment	`0x00004`	Key encipherment
ckuDataEncipherment	`0x00008`	Data encipherment
ckuKeyAgreement	`0x00010`	Key agreement
ckuKeyCertSign	`0x00020`	Certificate signing
ckuCRLSign	`0x00040`	Revocation signing
ckuEncipherOnly	`0x00080`	Encipher only
ckuDecipherOnly	`0x00100`	Decipher only
ckuServerAuthentication	`0x00200`	Server authentication
ckuClientAuthentication	`0x00400`	Client authentication
ckuCodeSigning	`0x00800`	Code signing
ckuEmailProtection	`0x01000`	Email protection
ckuTimeStamping	`0x02000`	Timestamping
ckuOCSPSigning	`0x04000`	OCSP signing
ckuSmartCardLogon	`0x08000`	Smartcard logon
ckuKeyPurposeClientAuth	`0x10000`	Kerberos - client authentication
ckuKeyPurposeKDC	`0x20000`	Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

keyValid
Bool (read-only)
Default Value: False

Returns True if the certificate's key is cryptographically valid, and False otherwise.

ocspLocations
String
Default Value: ""

Locations of OCSP services that can be used to check this certificate's validity in real time, as recorded by the CA.

Set this property before calling the certificate manager's Generate method to propagate it to the new certificate.

The OCSP locations are provided as a list of CRLF-separated URLs. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the location separator.

ocspNoCheck
Bool
Default Value: False

Accessor to the value of the certificate's ocsp-no-check extension.

origin
Int32 (read-only)
Default Value: 0

Returns the location that the certificate was taken or loaded from.

policyIDs
String
Default Value: ""

Contains identifiers (OIDs) of the applicable certificate policies.

The Certificate Policies extension identifies a sequence of policies under which the certificate has been issued, and which regulate its usage.

Set this property when generating a certificate to propagate the policies information to the new certificate.

The policies are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the policy element separator.

privateKeyBytes
Data (read-only)
Default Value: ""

Returns the certificate's private key in DER-encoded format. It is normal for this property to be empty if the private key is non-exportable, which, for example, is typical for certificates originating from hardware security devices.

privateKeyExists
Bool (read-only)
Default Value: False

Indicates whether the certificate has a usable private key associated with it. If it is set to True, the certificate can be used for private key operations, such as signing or decryption.

This property is independent from , and can be set to True even if the former is empty. This would imply that the private key is non-exportable, but still can be used for cryptographic operations.

privateKeyExtractable
Bool (read-only)
Default Value: False

Indicates whether the private key is extractable (exportable).

publicKeyBytes
Data (read-only)
Default Value: ""

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

qualified
Bool (read-only)
Default Value: False

Indicates whether the certificate is qualified.

This property is set to True if the certificate is confirmed by a Trusted List to be qualified.

qualifiedStatements
QualifiedStatementsTypes
Default Value: 0

Returns a simplified qualified status of the certificate.

qualifiers
String (read-only)
Default Value: ""

A list of qualifiers.

Contains a comma-separated list of qualifier aliases for the certificate, for example QCP-n-qscd,QCWithSSCD.

selfSigned
Bool (read-only)
Default Value: False

Indicates whether the certificate is self-signed (root) or signed by an external CA.

serialNumber
Data
Default Value: ""

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

sigAlgorithm
String (read-only)
Default Value: ""

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

source
PKISources (read-only)
Default Value: 0

Returns the source (location or disposition) of a cryptographic primitive entity, such as a certificate, CRL, or OCSP response.

subject
String (read-only)
Default Value: ""

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via .

subjectAlternativeName
String
Default Value: ""

Returns or sets the value of the Subject Alternative Name extension of the certificate.

Subject alternative names are used to provide additional names that are impractical to store in the main field. For example, it is often used to store all the domain names that a TLS certificate is authorized to protect.

The alternative names are provided as a list of CRLF-separated entries. Note that this differs from the behaviour used in earlier product versions, where the "|" character was used as the element separator.

subjectKeyID
Data
Default Value: ""

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The and properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

subjectRDN
String
Default Value: ""

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

valid
Bool (read-only)
Default Value: False

Indicates whether or not the signature over the certificate or the request is valid and matches the public key contained in the CA certificate/request.

validFrom
String
Default Value: ""

The time point at which the certificate becomes valid, in UTC.

validTo
String
Default Value: ""

The time point at which the certificate expires, in UTC.

Constructors

public init(stream: )

Loads the X.509 certificate from a stream. Stream is a stream containing the certificate data.

public init()

Creates a new object with default field values.

ExternalCrypto Type

Specifies the parameters of external cryptographic calls.

Remarks

External cryptocalls are used in a Distributed Cryptography (DC) subsystem, which allows the delegation of security operations to the remote agent. For instance, it can be used to compute the signature value on the server, while retaining the client's private key locally.

The following fields are available:

AsyncDocumentID

CustomParams

Data

ExternalHashCalculation

Fields

asyncDocumentID
String
Default Value: ""

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

customParams
String
Default Value: ""

Custom parameters to be passed to the signing service (uninterpreted).

data
String
Default Value: ""

Additional data to be included in the async state and mirrored back by the requestor.

externalHashCalculation
Bool
Default Value: False

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

hashAlgorithm
String
Default Value: "SHA256"

Specifies the request's signature hash algorithm.


SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_MD2	`MD2`
SB_HASH_ALGORITHM_MD4	`MD4`
SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_CRC32	`CRC32`
SB_HASH_ALGORITHM_SSL3	`SSL3`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_POLY1305	`POLY1305`
SB_HASH_ALGORITHM_SHA3_224	`SHA3_224`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`
SB_HASH_ALGORITHM_BLAKE2S_128	`BLAKE2S_128`
SB_HASH_ALGORITHM_BLAKE2S_160	`BLAKE2S_160`
SB_HASH_ALGORITHM_BLAKE2S_224	`BLAKE2S_224`
SB_HASH_ALGORITHM_BLAKE2S_256	`BLAKE2S_256`
SB_HASH_ALGORITHM_BLAKE2B_160	`BLAKE2B_160`
SB_HASH_ALGORITHM_BLAKE2B_256	`BLAKE2B_256`
SB_HASH_ALGORITHM_BLAKE2B_384	`BLAKE2B_384`
SB_HASH_ALGORITHM_BLAKE2B_512	`BLAKE2B_512`
SB_HASH_ALGORITHM_SHAKE_128	`SHAKE_128`
SB_HASH_ALGORITHM_SHAKE_256	`SHAKE_256`
SB_HASH_ALGORITHM_SHAKE_128_LEN	`SHAKE_128_LEN`
SB_HASH_ALGORITHM_SHAKE_256_LEN	`SHAKE_256_LEN`

keyID
String
Default Value: ""

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

keySecret
String
Default Value: ""

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the topic.

method
AsyncSignMethods
Default Value: 0

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:


asmdPKCS1	`0`
asmdPKCS7	`1`

mode
ExternalCryptoModes
Default Value: 0

Specifies the external cryptography mode.

Available options:


ecmDefault	The default value (`0`)
ecmDisabled	Do not use DC or external signing (`1`)
ecmGeneric	Generic external signing with the OnExternalSign event (`2`)
ecmDCAuth	DCAuth signing (`3`)
ecmDCAuthJSON	DCAuth signing in JSON format (`4`)

publicKeyAlgorithm
String
Default Value: ""

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.


SB_CERT_ALGORITHM_ID_RSA_ENCRYPTION	`rsaEncryption`
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTION	`md2withRSAEncryption`
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTION	`md5withRSAEncryption`
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTION	`sha1withRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA	`id-dsa`
SB_CERT_ALGORITHM_ID_DSA_SHA1	`id-dsa-with-sha1`
SB_CERT_ALGORITHM_DH_PUBLIC	`dhpublicnumber`
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTION	`sha224WithRSAEncryption`
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTION	`sha256WithRSAEncryption`
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTION	`sha384WithRSAEncryption`
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTION	`sha512WithRSAEncryption`
SB_CERT_ALGORITHM_ID_RSAPSS	`id-RSASSA-PSS`
SB_CERT_ALGORITHM_ID_RSAOAEP	`id-RSAES-OAEP`
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160	`ripemd160withRSA`
SB_CERT_ALGORITHM_ID_ELGAMAL	`elGamal`
SB_CERT_ALGORITHM_SHA1_ECDSA	`ecdsa-with-SHA1`
SB_CERT_ALGORITHM_RECOMMENDED_ECDSA	`ecdsa-recommended`
SB_CERT_ALGORITHM_SHA224_ECDSA	`ecdsa-with-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA	`ecdsa-with-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA	`ecdsa-with-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA	`ecdsa-with-SHA512`
SB_CERT_ALGORITHM_EC	`id-ecPublicKey`
SB_CERT_ALGORITHM_SPECIFIED_ECDSA	`ecdsa-specified`
SB_CERT_ALGORITHM_GOST_R3410_1994	`id-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3410_2001	`id-GostR3410-2001`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994	`id-GostR3411-94-with-GostR3410-94`
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001	`id-GostR3411-94-with-GostR3410-2001`
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAIN	`ecdsa-plain-SHA1`
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAIN	`ecdsa-plain-SHA224`
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAIN	`ecdsa-plain-SHA256`
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAIN	`ecdsa-plain-SHA384`
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAIN	`ecdsa-plain-SHA512`
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAIN	`ecdsa-plain-RIPEMD160`
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTION	`whirlpoolWithRSAEncryption`
SB_CERT_ALGORITHM_ID_DSA_SHA224	`id-dsa-with-sha224`
SB_CERT_ALGORITHM_ID_DSA_SHA256	`id-dsa-with-sha256`
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA	`id-ecdsa-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA	`id-ecdsa-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA	`id-ecdsa-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA	`id-ecdsa-with-sha3-512`
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-224`
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-256`
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-384`
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAIN	`id-ecdsa-plain-with-sha3-512`
SB_CERT_ALGORITHM_ID_DSA_SHA3_224	`id-dsa-with-sha3-224`
SB_CERT_ALGORITHM_ID_DSA_SHA3_256	`id-dsa-with-sha3-256`
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTION	`id-rsassa-pkcs1-v1_5-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA	`id-ecdsa-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA	`id-ecdsa-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA	`id-ecdsa-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA	`id-ecdsa-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA	`id-ecdsa-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA	`id-ecdsa-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA	`id-ecdsa-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA	`id-ecdsa-with-blake2b512`
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s128`
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s160`
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s224`
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2s256`
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b160`
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b256`
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b384`
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAIN	`id-ecdsa-plain-with-blake2b512`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224	`id-dsa-with-blake2s224`
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256	`id-dsa-with-blake2s256`
SB_CERT_ALGORITHM_EDDSA_ED25519	`id-Ed25519`
SB_CERT_ALGORITHM_EDDSA_ED448	`id-Ed448`
SB_CERT_ALGORITHM_EDDSA_ED25519_PH	`id-Ed25519ph`
SB_CERT_ALGORITHM_EDDSA_ED448_PH	`id-Ed448ph`
SB_CERT_ALGORITHM_EDDSA	`id-EdDSA`
SB_CERT_ALGORITHM_EDDSA_SIGNATURE	`id-EdDSA-sig`

Constructors

public init()

Creates a new ExternalCrypto object with default field values.

Config Settings (OfficeQuickSigner Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

OfficeQuickSigner Config Settings

AddAllDataObjectsTimestamp: Whether to add all data objects timestamp during signing.

If this property is set to True, the all data objects timestamp (xades:AllDataObjectsTimeStamp element) will be added.

AsyncDocumentID: Specifies the document ID for SignAsyncEnd() call.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. This value helps ASiCSigner identify the correct signature in the returned batch of responses. If using batched requests, make sure to set this property to the same value on both pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

ChainCurrentCACert: Returns the current CA certificate.

This property returns the CA certificate that is used on the current step.

ChainCurrentCert: Returns the certificate that is currently being validated.

Use this property to obtain the body of the certificate that is currently being validated.

ChainCurrentCRL: Returns the current CRL.

Returns the CRL object that is currently being processed.

ChainCurrentCRLSize: Returns the size of the current CRL.

This property returns the size of the CRL object that is currently being processed.

ChainCurrentOCSP: Returns the current OCSP response.

Returns the OCSP object that is currently being processed.

ChainCurrentOCSPSigner: Returns the signer of the current OCSP object.

Returns the signer/CA that has issued the OCSP response that is currently being processed.

ChainInterimDetails: Returns the current interim validation details.

This property returns the interim chain validation details.

ChainInterimResult: Returns the current interim validation result.

Use this setting to obtain the current (mid-chain) validation result. This property applies to the current validation step and may change as the chain walk proceeds. The final result will be published in the ChainValidationResult property once the validation process completes.

CheckValidityPeriodForTrusted: Whether to check validity period for trusted certificates.

Whether to check validity period for trusted certificates.

ClaimedRolesXML: The XML content of the claimed roles.

Use this property to get/specify the XML content of the claimed roles element.

ClaimedRoleText: The text of the claimed role.

Use this property to get/specify the text of the first claimed role.

CommitmentTypeIndicationAllSignedDataObjects[Index]: Specifies the CommitmentTypeIndication's AllSignedDataObjects.

This property contains if the CommitmentTypeIndication's AllSignedDataObjects element is present that indicates that all the signed data objects share the same commitment. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationCount: The number of the CommitmentTypeIndication elements.

Returns the number of the xades:CommitmentTypeIndication elements available.

CommitmentTypeIndicationIdentifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Identifier.

This property contains an identifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Identifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDescription[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's Description.

This property contains an identifier's description indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's Description element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierDocumentationReferences[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's DocumentationReferences element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationIdentifierQualifier[Index]: Specifies the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of commitment made by the signer in the CommitmentTypeIndication's CommitmentTypeId's IdentifierQualifier element. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationObjectReference[Index]: Specifies the CommitmentTypeIndication's ObjectReference.

This property contains the CommitmentTypeIndication's ObjectReference elements that refer to one or several ds:Reference elements of the ds:SignedInfo corresponding with one data object qualified by this property. Index value could be omitted for the first CommitmentTypeIndication element.

CommitmentTypeIndicationQualifiersXML[Index]: The XML content of the CommitmentTypeIndication's Qualifiers.

This property contains the CommitmentTypeIndication's Qualifiers elements XML content. Index value could be omitted for the first CommitmentTypeIndication element.

CustomTrustedLists: Specifies the custom TrustedLists.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

CustomTSLs: Specifies the custom TrustedLists.

Use this property to specify the custom TSLs (Trust Service status Lists) to the validator. The URLs list is comma-separated.

DataObjectFormatCount: The number of the DataObjectFormat elements.

Returns the number of the xades:DataObjectFormat elements available.

DataObjectFormatDescription[Index]: Specifies the DataObjectFormat's Description.

This property contains textual information related to the signed data object in the DataObjectFormat's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatEncoding[Index]: Specifies the DataObjectFormat's Encoding.

This property contains an indication of the encoding format of the signed data object in the DataObjectFormat's Encoding element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatMimeType[Index]: Specifies the DataObjectFormat's MimeType.

This property contains an indication of the MIME type of the signed data object in the DataObjectFormat's MimeType element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Identifier.

This property contains an identifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Identifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDescription[Index]: Specifies the DataObjectFormat's ObjectIdentifier's Description.

This property contains an identifier's description indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's Description element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierDocumentationReferences[Index]: Specifies the DataObjectFormat's ObjectIdentifier's DocumentationReferences.

This property contains an identifier's documentation references indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's DocumentationReferences element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectIdentifierQualifier[Index]: Specifies the DataObjectFormat's ObjectIdentifier's IdentifierQualifier.

This property contains an identifier qualifier indicating the type of the signed data object in the DataObjectFormat's ObjectIdentifier's IdentifierQualifier element. Index value could be omitted for the first DataObjectFormat element.

DataObjectFormatObjectReference[Index]: Specifies the DataObjectFormat's ObjectReference.

This property contains the DataObjectFormat's ObjectReference element that reference the ds:Reference element of the ds:Signature corresponding with the data object qualified by this property.

For example, if the corresponding ds:Reference element has an Id "reference-id-1", then you should set this property to "#reference-id-1" value.

Index value could be omitted for the first DataObjectFormat element.

DislikeOpenEndedOCSPs: Tells the class to discourage OCSP responses without an explicit NextUpdate parameter.

When this property is set to True, the validation engine treats OCSP response without a NextUpdate field as 'substandard' and tries to obtain some further revocation material for the certificate in question (a different OCSP or a CRL, even if the class is configured to prefer the OCSP route). This is to work around Adobe Reader's intolerance to such OCSPs when classifying signed documents as LTV (as of August 2022).

ExclusiveCanonicalizationPrefix: Specifies the exclusive canonicalization prefix.

Specifies the prefix for the ec:InclusiveNamespaces element for the exclusive canonicalization.

Default value is "ec". In this case "ec:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

ExpireTime: Signature expiration time in UTC.

Specifies the signature expiration time in UTC. Used for Binary Crypto API signature.

ForceCompleteChainValidation: Whether to check the CA certificates when the signing certificate is invalid.

Set this property to True to check issuer (CA) certificates if the signing or an intermediate chain certificate is invalid.

ForceCompleteChainValidationForTrusted: Whether to continue with the full validation up to the root CA certificate for mid-level trust anchors.

Set this property to True to enable full chain validation for explicitly trusted intermediary or end-entity certificates. This may be useful when creating signatures to enforce completeness of the collected revocation information. It often makes sense to set this property to false when validating signatures to reduce validation time and avoid issues with badly configured environments.

GracePeriod: Specifies a grace period to apply during revocation information checks.

Use this property to specify a grace period (in seconds). Grace period applies to certain subprotocols, such as OCSP, and caters to the inaccuracy and/or missynchronization of clocks on different participating systems. Any time deviations within the grace period will be tolerated.

HMACKey: The key value for HMAC.

Use this property to set the HMAC key. The component uses base16 (hex) encoding for this configuration value.

HMACOutputLength: Sets the length of the HMAC output.

Use this property to configure the length of the HMAC output, in bytes.

HMACSigningUsed: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. TBD

IgnoreChainLoops: Whether chain loops should be ignored.

Set this property to True to make the validation engine ignore chain loops. This may be an option when you need to process chains from buggy CAs that happen to include subchains that sign themselves.

IgnoreChainValidationErrors: Whether to ignore any certificate chain validation issues.

Enable this property to ignore any chain validation errors when creating a signature. This may be useful if the signature is created in an environment which uses different trust settings to the validation environment.

IgnoreOCSPNoCheckExtension: Whether the OCSP NoCheck extension should be ignored.

Set this property to True to make the validation engine ignore the OCSP no-check extension. You would normally need to set this property when validating severely non-compliant chains that misuse the extension, causing chain loops or other validation issues.

IgnoreSystemTrust: Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the class should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the class should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as the TrustedCertificates property) are considered trusted.

IgnoreTimestampFailure: Whether to ignore time-stamping failure during signing.

If this property is set to True, any failure during time-stamping process will be ignored.

ImplicitlyTrustSelfSignedCertificates: Whether to trust self-signed certificates.

Set this property to True to implicitly trust all self-signed certificates. Use it with care as trusting just about every self-signed certificate is unwise. One exceptional reason where this property may be handy is where a chain is validated in an environment that is not supposed to trust it (for example, a signing, rather than verifying environment, or a QA server). Trusting all self-signing certificates (which are normally trusted) allows emulating the verifying environment without actually changing its security settings.

IncludeKnownRevocationInfoToSignature: Whether to include custom revocation info to the signature.

This property specifies whether revocation pieces provided via KnownCertificates, KnownCRLs, and KnownOCSPs properties should be included into the signature. This property lets you include custom validation elements to the signature in addition to the ones comprising the signing chain.

InclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList.

Use this property to read/specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

KeyInfoID: Specifies the ID for KeyInfo element.

This property contains the identifier (ID) attribute of the ds:KeyInfo element.

KeyName: Contains information about the key used for signing.

The KeyName element contains a string value (with significant whitespaces) which may be used by the signer to communicate a key identifier to the recipient. Typically, the KeyName element contains an identifier related to the key pair used to sign the message, but it may contain other protocol-related information that indirectly identifies a key pair. Common uses of the KeyName include simple string names for keys, a key index, a distinguished name (DN), an email address, etc.

ManifestCount: TBD.

TBD

ManifestID[i]: TBD.

TBD

ManifestObjectIndex[i]: TBD.

TBD

ManifestXML[i]: TBD.

TBD

ObjectCount: TBD.

TBD

ObjectEncoding[i]: TBD.

TBD

ObjectID[i]: TBD.

TBD

ObjectMimeType[i]: TBD.

TBD

ObjectSignaturePropertiesCount: TBD.

TBD

ObjectSignaturePropertiesID[i]: TBD.

TBD

ObjectSignaturePropertiesObjectIndex[i]: TBD.

TBD

ObjectSignaturePropertiesXML[i]: TBD.

TBD

ObjectSignaturePropertyCount: TBD.

TBD

ObjectSignaturePropertyID[i]: TBD.

TBD

ObjectSignaturePropertyPropertiesIndex[i]: TBD.

TBD

ObjectSignaturePropertyTarget[i]: TBD.

TBD

ObjectSignaturePropertyXML[i]: TBD.

TBD

ObjectXML[i]: TBD.

TBD

PolicyDescription: signature policy description.

This property specifies the Description of the signature policy. signature policy description.

This property specifies the Description of the signature policy.

PolicyDescription: signature policy description.

This property specifies the Description of the signature policy. signature policy description.

This property specifies the Description of the signature policy.

PolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified. The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified. The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified.

PolicyUNNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES. The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES. The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES. The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

PolicyUNOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES. The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES.

ProductionPlace: Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

ProductionPlace: Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

Identifies the place of the signature production.

The signature production place in JSON format that was included or to be included into the signature.

Sample value: '{"addressCountry": "UK", "addressLocality": "London", "postalCode": "N1 7GU", "streetAddress": "20-22 Wenlock Road"}'

PromoteLongOCSPResponses: Whether long OCSP responses are requested.

Set this property to True to force the class to publish the 'long' form of OCSP responses. Otherwise, only BasicOCSPResponse blobs are promoted.

PSSUsed: Whether to use RSASSA-PSS algorithm.

Although the RSASSA-PSS algorithm provides better security than a classic RSA scheme (PKCS#1-1.5), please take into account that RSASSA-PSS is a relatively new algorithm which may not be understood by older implementations. This is an alias for UsePSS. Whether to use RSASSA-PSS algorithm.

PSSUsed: Whether to use RSASSA-PSS algorithm.

QualifyingPropertiesID: Specifies the ID for QualifyingProperties element.

This property contains the identifier (ID) attribute of the xades:QualifyingProperties element.

QualifyingPropertiesObjectID: Specifies the ID for object with QualifyingProperties element.

This property contains the identifier (ID) attribute of the ds:Object element that contains xades:QualifyingProperties element.

QualifyingPropertiesReferenceCount: The number of the QualifyingPropertiesReference elements.

Returns the number of the xades:QualifyingPropertiesReference elements available.

QualifyingPropertiesReferenceID[Index]: Specifies the QualifyingPropertiesReference's ID.

This property contains an identifier (ID) attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

QualifyingPropertiesReferenceURI[Index]: Specifies the QualifyingPropertiesReference's URI.

This property contains an URI attribute of the xades:QualifyingPropertiesReference element. Index value could be omitted for the first QualifyingPropertiesReference element.

RefsTimestampType: Specifies references timestamp type to include to the signature.

Contains a comma-separated list of values that specifies which references timestamp type to include to the signature when signature upgraded to XAdES-X or XAdES-E-X form.

Supported values are:


SigAndRefs		SigAndRefs timestamp
RefsOnly		RefsOnly timestamp

SchemeParams: The algorithm scheme parameters to employ.

Use this property to specify the parameters of the algorithm scheme if needed.

This setting is used to provide parameters for some cryptographic schemes. Use the Name1=Value1;Name2=Value2;... syntax to encode the parameters. For example: Scheme=PSS;SaltSize=32;TrailerField=1.

SignatureID: Specifies the ID for Signature element.

This property contains the identifier (ID) attribute of the ds:Signature element.

SignatureInfoAddress1: Specifies the location at which the signature was created.

Use this property to specify the location at which the signature was created.

SignatureInfoAddress2: Specifies the location at which the signature was created.

Use this property to specify the location at which the signature was created.

SignatureInfoComments: Comments to the signature info text.

Comments to the signature info text.

SignatureInfoDelegateSuggestedSigner: Specifies the name of a person.

Use this property to specify the name of a person to whom the signature has been delegated.

SignatureInfoDelegateSuggestedSigner2: Specifies the title of a person.

Use this property to specify the title of a person to whom the signature has been delegated.

SignatureInfoDelegateSuggestedSignerEmail: Specifies the e-mail address of a person.

Use this property to specify the e-mail address of a person to whom the signature has been delegated.

SignatureInfoImage: Specifies an image for the digital signature.

Use his property to set an image for the digital signature.

SignatureInfoIncluded: Whether to include the signature info.

Specifies whether to include the signature info.

Sample code that demonstrates adding signature information for OpenXML documents: signer.NewSignature.Level = aslEPES; signer.Config("SignatureInfoIncluded=true"); signer.Config("SignatureInfoText=Text"); signer.Config("SignatureInfoComments=Comment"); signer.Config("ClaimedRoleText=Role"); signer.Config("CommitmentTypeIndicationCount=1"); signer.Config("CommitmentTypeIndicationAllSignedDataObjects=true"); signer.Config("CommitmentTypeIndicationIdentifier=http://uri.etsi.org/01903/v1.2.2#ProofOfApproval"); signer.Config("CommitmentTypeIndicationIdentifierDescription=Approved this document"); signer.Config("ProductionPlace=CITY=Test City, ST=Test State, POSTALCODE=Test Code, C=Test Country"); signer.Config("SignatureInfoAddress1=Address1"); signer.Config("SignatureInfoAddress2=Address2");

SignatureInfoInvalidLnImage: Specifies the image of an invalid signature.

Use this property to set the image of an invalid signature, if the digital signature must be printed.

SignatureInfoSignatureType: Specifies the type of the digital signature.

Use this property to specify the type of the digital signature.

When the type is 2, both SignatureInfoValidLnImage and SignatureInfoInvalidLnImage images should be specified.

SignatureInfoText: The text to be displayed as the signature info.

The text to be displayed as the signature info.

SignatureInfoValidLnImage: Specifies the image of a valid signature.

Use this property to set the image of a valid signature, if the digital signature must be printed.

SignatureLineAdditionalSignatureInfo[Index]: Contains additional signature information.

This property contains additional signature information.

SignatureLineAllowComments[Index]: Indicates if comments are allowed.

This property contains the True value if comments are allowed.

SignatureLineCount: The number of signature lines.

Returns the number of the signature lines available for Office Open XML (OOXML) documents.

SignatureLineId[Index]: Contains signature unique ID.

This property contains signature unique ID.

SignatureLineImageData[Index]: Contains signature image.

This property contains signature image.

SignatureLineIndex: Specifies the index of the signature line to sign.

Use this property to specify the signature line that should be signed. If the default value of -1 is assigned to this property, no signature line will be signed.

SignatureLineShowSignDate[Index]: Indicates if signing date should be shown.

This property contains the True value if the signature line should include the signing date.

SignatureLineSignatureIndex[Index]: The index of the signature that signs signature line.

This property contains the index of the signature that signs this signature line.

SignatureLineSignatureProviderId[Index]: Contains signature provider ID.

This property contains a unique ID identifying which signature provider created the signature line.

SignatureLineSignatureProviderUrl[Index]: Contains signature provider URL.

This property contains a signature provider download URL.

SignatureLineSigned[Index]: Indicates if signature line is signed.

This property contains the True value if signature line is signed.

SignatureLineSigningInstructions[Index]: Contains signing instructions.

This property contains the instructions, shown to the user at signing time.

SignatureLineSuggestedSigner2[Index]: Suggested signer line two.

This property contains the second line of information of who should sign the signature line.

SignatureLineSuggestedSigner[Index]: Suggested signer line one.

This property contains the first line of information of who should sign the signature line.

SignatureLineSuggestedSignerEmail[Index]: Suggested signer email address.

This property contains the email address of who should sign the signature line.

SignatureOriginPartURI: Contains the signature origin part URI element.

Use this property to get or set the signature origin part URI record.

SignaturePartName: Name of signature part.

Use this property to specify the custom name of the signature part for Open XML documents.

SignaturePrefix: Specifies the signature prefix.

Specifies the prefix for the Signature elements.

Default value is "ds". In this case "ds:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

SignatureValueID: Specifies the ID for SignatureValue element.

This property contains the identifier (ID) attribute of the ds:SignatureValue element.

SignedInfoID: Specifies the ID for SignedInfo element.

This property contains the identifier (ID) attribute of the ds:SignedInfo element.

SignedPropertiesID: Specifies the ID for SignedProperties element.

This property contains the identifier (ID) attribute of the xades:SignedProperties element.

SignedPropertiesReferenceCanonicalizationMethod: Specifies the canonicalization method used in SignedProperties reference.

Use this property to specify the canonicalization method for the canonicalization transform of the ds:Reference element that points to xades:SignedProperties element. Use cxcmNone value to not to include canonicalization transform in transform chain.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

SignedPropertiesReferenceHashAlgorithm: Specifies the hash algorithm used in SignedProperties reference.

Use this property to specify the hash algorithm to be used for the ds:Reference element that points to xades:SignedProperties element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

SignedPropertiesReferenceID: Specifies the ID for Reference element that points to SignedProperties element.

This property contains the identifier (ID) attribute of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceInclusiveNamespacesPrefixList: Specifies the InclusiveNamespaces PrefixList used in SignedProperties reference.

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the ds:Reference element that points to xades:SignedProperties element.

SignedPropertiesReferenceIndex: Specifies the index of SignedProperties reference.

Use this property to specify the reference's index for the ds:Reference element that points to xades:SignedProperties element.

SignedSignaturePropertiesID: Specifies the ID for SignedSignatureProperties element.

This property contains the identifier (ID) attribute of the xades:SignedSignatureProperties element.

SigningCertificatesChain: The indicator of which certificates should be/are included as the signing chain.

Use this property to check or set the indices of the signing chain included in the signature. The none and all placeholders are supported.

SigningCertificatesHashAlgorithm: Specifies the hash algorithm used for SigningCertificates.

Use this property to specify the hash algorithm to be used for xades:SigningCertificates element.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

SignTime: Specifies the signing time in UTC.

Specifies the signing time in UTC. Used for Binary Crypto API signature.

SigPolicyDescription: signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription). signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription).

SigPolicyDescription: signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription). signature policy description.

This property specifies the Description of the signature policy (an alias for PolicyDescription).

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText); The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText);

SigPolicyExplicitText: The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText); The explicit text of the user notice.

Use this property to specify the explicit text of the user notice to be displayed when the signature is verified (an alias for PolicyExplicitText);

SigPolicyHash: The EPES policy hash.

Use this configuration setting to provide the EPES policy hash. The EPES policy hash.

Use this configuration setting to provide the EPES policy hash.

SigPolicyHash: The EPES policy hash.

Use this configuration setting to provide the EPES policy hash. The EPES policy hash.

Use this configuration setting to provide the EPES policy hash.

SigPolicyHashAlgorithm: The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash. The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash.

SigPolicyHashAlgorithm: The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash. The hash algorithm that was used to generate the EPES policy hash.

Use this setting to provide the hash algorithm that was used to generate the policy hash.

SigPolicyID: The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5). The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5).

SigPolicyID: The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5). The EPES policy ID.

The EPES signature policy identifier, in dotted OID format (1.2.3.4.5).

SigPolicyNoticeNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers). The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers).

SigPolicyNoticeNumbers: The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers). The noticeNumbers part of the NoticeReference CAdES attribute.

Defines the "noticeNumbers" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNNumbers).

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization). The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization).

SigPolicyNoticeOrganization: The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization). The organization part of the NoticeReference qualifier.

Defines the "organization" part of the NoticeReference signature policy qualifier for CAdES-EPES (an alias for PolicyUNOrganization).

SigPolicyURI: The EPES policy URI.

Assign the EPES policy URI to this setting. The EPES policy URI.

Assign the EPES policy URI to this setting.

SigPolicyURI: The EPES policy URI.

Assign the EPES policy URI to this setting. The EPES policy URI.

Assign the EPES policy URI to this setting.

TempPath: Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TimestampCanonicalizationMethod: Specifies canonicalization method used in timestamp.

Use this property to specify the canonicalization method used in timestamp.


cxcmNone	`0`
cxcmCanon	`1`
cxcmCanonComment	`2`
cxcmExclCanon	`3`
cxcmExclCanonComment	`4`
cxcmMinCanon	`5`
cxcmCanon_v1_1	`6`
cxcmCanonComment_v1_1	`7`

TimestampResponse: A base16-encoded timestamp response received from a TSA.

When using virtual:// timestamp endpoints, assign this property in your Notification event handler with the TSP response that you receive from the TSA. Remember to encode the response in hex (base16).

TimestampValidationDataDetails: Specifies timestamp validation data details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when xades:TimeStampValidationData element added.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

TLSChainValidationDetails: Contains the advanced details of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to access the TLS certificate validation details.

TLSChainValidationResult: Contains the result of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to obtain the TLS certificate validation result.

TLSClientAuthRequested: Indicates whether the TLS server requests client authentication.

Check this property in the TLSCertValidate event handler to find out whether the TLS server requests the client to provide the authentication certificate. If this property is set to true, provide your certificate via the TLSClientChain property. Note that the class may fire this event more than once during each operation, as more than one TLS-enabled server may need to be contacted.

TLSValidationLog: Contains the log of the TLS server certificate validation.

Check this property in the TLSCertValidate event handler to retrieve the validation log of the TLS server.

TolerateMinorChainIssues: Whether to tolerate minor chain issues.

This parameter controls whether the chain validator should tolerate minor technical issues when validating the chain. Those are:

CA, revocation source, TLS key usage requirements are not mandated
Violation of OCSP issuer requirements are ignored
The AuthorityKeyID extension in CRL- and certificate-issuing CAs are ignored (helps with incorrectly renewed certificates)
Basic constraints and name constraints of CA certificates are ignored
Some weaker algorithms are tolerated

TspAttemptCount: Specifies the number of timestamping request attempts.

Use this property to specify a number of timestamping request attempts.

In case of a timestamping failure, provide new TSA and HTTP settings inside the Notification event handler ('BeforeTimestamp' and 'TimestampError' event IDs).

TspHashAlgorithm: Sets a specific hash algorithm for use with the timestamping service.

In default configuration class uses the 'SHA256' hash algorithm. Use this property to specify a different hash algorithm for the timestamp.

TspReqPolicy: Sets a request policy ID to include in the timestamping request.

Use this property to provide a specific request policy OID to include in the timestamping request. Use the standard human-readable OID notation (1.2.3.4.5).

UseDefaultTrustedLists: Enables or disables the use of the default TrustedLists.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists).

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseDefaultTSLs: Enables or disables the use of the default TrustedLists.

Use this property to tell the validator to use (or not to use) the default TSLs (Trust Service status Lists).

The following default TSLs are used: EU (European Union) LOTL (list of trusted lists).

UseHMACSigning: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography.

UseHMACSigning: Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography. Whether to use HMAC signing.

Set this property to true to make the component perform signing using HMAC method, rather than asymmetric cryptography.

UseMicrosoftCTL: Enables or disables the automatic use of the Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UsePSS: Whether to use RSASSA-PSS algorithm.

UseSystemCertificates: Enables or disables the use of the system certificates.

Use this property to tell the chain validation module to automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

UseValidationCache: Enables or disable the use of the product-wide certificate chain validation cache.

Use this property to enable or disable the use of the global chain validation cache. If enabled, the class will consult the product-wide validation cache when validating the signing chains. Also, the outcomes of any new chain validations performed by the class, both interim and final, will be saved in the cache and available for re-use by any future validations. Disable this property to ignore the cache and always perform the validation from a fresh start.

UseValidatorSettingsForTLSValidation: Whether to employ the primary chain validator setup for auxiliary TLS chain validations.

Use this property to specify whether you would like to use the primary (AdES) chain validator component to validate TLS chains for any connections involved (OCSP, CRL).

ValidationDataRefsDetails: Specifies validation data references details to include to the signature.

Contains a comma-separated list of values that specifies which validation data references details to include to the signature when signature upgraded to XAdES-C or XAdES-E-C form.

Supported values are:


certificate		References to X.509 certificates
crl		References to certificate revocation lists (CRL)
ocsp		References to OCSP responses

ValidationDataRefsHashAlgorithm: Specifies the hash algorithm used in validation data references.

Use this property to specify the hash algorithm used to compute hashes for validation data references.

Supported values:


SB_HASH_ALGORITHM_MD5	`MD5`
SB_HASH_ALGORITHM_SHA1	`SHA1`
SB_HASH_ALGORITHM_SHA224	`SHA224`
SB_HASH_ALGORITHM_SHA256	`SHA256`
SB_HASH_ALGORITHM_SHA384	`SHA384`
SB_HASH_ALGORITHM_SHA512	`SHA512`
SB_HASH_ALGORITHM_RIPEMD160	`RIPEMD160`
SB_HASH_ALGORITHM_GOST_R3411_1994	`GOST1994`
SB_HASH_ALGORITHM_WHIRLPOOL	`WHIRLPOOL`
SB_HASH_ALGORITHM_SHA3_256	`SHA3_256`
SB_HASH_ALGORITHM_SHA3_384	`SHA3_384`
SB_HASH_ALGORITHM_SHA3_512	`SHA3_512`

The default value is empty string, in this case, the hash algorithm specified in HashAlgorithm property is used.

ValidationDataValuesDetails: Specifies validation data values details to include to the signature.

Contains a comma-separated list of values that specifies which validation data values details to include to the signature when signature upgraded to XAdES-X-L or XAdES-E-X-L form.

Supported values are:


certificate		Base64-encoded [X509v3] certificates
crl		Base64-encoded certificate revocation lists (CRL)
ocsp		OCSP responses

XAdESPrefix: Specifies the XAdES prefix.

Specifies the prefix for the XAdES elements.

Default value is "xades". In this case "xades:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

XAdESv141Prefix: Specifies the XAdES v1.4.1 prefix.

Specifies the prefix for the XAdES v1.4.1 elements.

Default value is "xadesv141". In this case "xadesv141:" prefix will be used.

Special values:


"#default" or ""	indicates that the prefix will be omitted.
"#auto"	indicates that the prefix will be auto-detected based on the parent nodes.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (OfficeQuickSigner Module)

OfficeQuickSigner Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
24117249	The input file does not exist (`SB_ERROR_OFFICE_INPUTFILE_NOT_EXISTS`)
24117250	Unsupported document format (`SB_ERROR_OFFICE_UNSUPPORTED_DOCUMENT_FORMAT`)
24117251	The document cannot be signed (`SB_ERROR_OFFICE_DOCUMENT_NOT_SIGNABLE`)
24117253	The document is already encrypted (`SB_ERROR_OFFICE_DOCUMENT_ENCRYPTED`)
24117254	The document cannot be encrypted (`SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTABLE`)
24117255	The document is not encrypted (`SB_ERROR_OFFICE_DOCUMENT_NOT_ENCRYPTED`)
24117256	Unsupported encryption type (`SB_ERROR_OFFICE_DOCUMENT_UNKNOWN_ENCRYPTION`)
24117257	Invalid password (`SB_ERROR_OFFICE_INVALID_PASSWORD`)
24117258	No signature found to complete the asynchronous signing (`SB_ERROR_OFFICE_SIGNATURE_NOT_FOUND`)