PGPKeyring Module

Properties Methods Events Config Settings Errors

The PGPKeyring module accesses and manages PGP keyring files.

Syntax

SecureBlackbox.PGPKeyring

Remarks

PGPKeyring is used to hold and access PGP keys. It contains information about both public keys and secret keys, which are usually stored in two separate files: "public keyring" and "secret keyring", respectively.

Property List

The following is the full list of the properties of the module with short descriptions. Click on the links for further details.


Keys	PGP keys available in the keyring.
PinnedKey	A PGP key that is being manipulated on.
SelectedKeys	The keys matching the selection criteria.

Method List

The following is the full list of the methods of the module with short descriptions. Click on the links for further details.


Config	Sets or retrieves a configuration setting.
DoAction	Performs an additional action.
ExportBytes	Exports the keyring to a byte array.
ExportToFile	Exports the keyring to disk.
ImportBytes	Loads a key from a byte array.
ImportFromFile	Loads a key from a file.
ImportPinned	Imports a pinned secret key to the keyring.
Remove	Removes the specified key from the keyring.
RemoveByID	Removes key by its ID.
Reset	Creates a new empty keyring.
Select	Filters a selection of keys from the keyring using a template.
UpdatePinned	Update a pinned key in the keyring.

Event List

The following is the full list of the events fired by the module with short descriptions. Click on the links for further details.


Error	Information about errors during PGP key management.
Notification	This event notifies the application about an underlying control flow event.

Config Settings

The following is a list of config settings for the module with short descriptions. Click on the links for further details.


Armor	Enables or disables ASCII armouring.
ArmorBoundary	Specifies the armour boundary/title.
ArmorHeaders	Specifies armour headers.
UseLongKeyIDs	Enables long (8-byte) KeyID representation.
ASN1UseGlobalTagCache	Controls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPins	Specifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUse	Enables or disable private key integrity check before use.
CookieCaching	Specifies whether a cookie cache should be used for HTTP(S) transports.
Cookies	Gets or sets local cookies for the module.
DefDeriveKeyIterations	Specifies the default key derivation algorithm iteration count.
DNSLocalSuffix	The suffix to assign for TLD names.
EnableClientSideSSLFFDHE	Enables or disables finite field DHE key exchange support in TLS clients.
GlobalCookies	Gets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicy	The hardware crypto usage policy.
HttpUserAgent	Specifies the user agent name to be used by all HTTP clients.
HttpVersion	The HTTP version to use in any inner HTTP client modules created.
IgnoreExpiredMSCTLSigningCert	Whether to tolerate the expired Windows Update signing certificate.
ListDelimiter	The delimiter character for multi-element lists.
LogDestination	Specifies the debug log destination.
LogDetails	Specifies the debug log details to dump.
LogFile	Specifies the debug log filename.
LogFilters	Specifies the debug log filters.
LogFlushMode	Specifies the log flush mode.
LogLevel	Specifies the debug log level.
LogMaxEventCount	Specifies the maximum number of events to cache before further action is taken.
LogRotationMode	Specifies the log rotation mode.
MaxASN1BufferLength	Specifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepth	Specifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithm	Specifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallback	Specifies whether the SSH client should use a SHA1 fallback.
ProductVersion	Returns the version of the SecureBlackbox library.
ServerSSLDHKeyLength	Sets the size of the TLS DHE key exchange group.
StaticDNS	Specifies whether static DNS rules should be used.
StaticIPAddress[domain]	Gets or sets an IP address for the specified domain name.
StaticIPAddresses	Gets or sets all the static DNS rules.
Tag	Allows to store any custom data.
TLSSessionGroup	Specifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetime	Specifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeInterval	Specifies how often the session cache should remove the expired TLS sessions.
UseInternalRandom	Switches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidation	Enables legacy AdES validation mode.
UseOwnDNSResolver	Specifies whether the client modules should use own DNS resolver.
UseSharedSystemStorages	Specifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculation	An internal CryptoAPI access tweak.
UseSystemOAEPAndPSS	Enforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandom	Enables or disables the use of the OS PRNG.

Keys Property (PGPKeyring Module)

PGP keys available in the keyring.

public var keys: Array<PGPKey> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=keyCount) int keyCount;

- (int)keyCount;

- (int)keyBitsInKey:(int)keyIndex;

- (BOOL)keyCanEncrypt:(int)keyIndex;

- (BOOL)keyCanSign:(int)keyIndex;

- (NSString*)keyCurve:(int)keyIndex;

- (BOOL)keyEnabled:(int)keyIndex;

- (NSString*)keyEncryptionAlgorithm:(int)keyIndex;

- (long long)keyHandle:(int)keyIndex;

- (BOOL)keyIsPublic:(int)keyIndex;

- (BOOL)keyIsSecret:(int)keyIndex;

- (BOOL)keyIsSubkey:(int)keyIndex;

- (NSString*)keyKeyFP:(int)keyIndex;

- (NSString*)keyKeyID:(int)keyIndex;

- (NSString*)keyPassphrase:(int)keyIndex;

- (BOOL)keyPassphraseValid:(int)keyIndex;

- (NSString*)keyPrimaryKeyID:(int)keyIndex;

- (int)keyProtection:(int)keyIndex;

- (NSString*)keyPublicKeyAlgorithm:(int)keyIndex;

- (int)keyQBits:(int)keyIndex;

- (NSString*)keyTimestamp:(int)keyIndex;

- (NSString*)keyUsername:(int)keyIndex;

- (NSString*)keyValidTo:(int)keyIndex;

- (int)keyVersion:(int)keyIndex;

Default Value

Remarks

This property populates a collection of all pgp keys contained in the keyring.

This property is read-only.

PinnedKey Property (PGPKeyring Module)

A PGP key that is being manipulated on.

Syntax

Swift
Objective-C

public var pinnedKey: PGPKey {
  get {...}
  set {...}
}


@property (nonatomic,readwrite,assign,getter=pinnedKeyHandle,setter=setPinnedKeyHandle:) long long pinnedKeyHandle;

- (long long)pinnedKeyHandle;
- (void)setPinnedKeyHandle :(long long)newPinnedKeyHandle;

Default Value

Remarks

Use this property to specify a key to perform operations on, such as adding.

This property is read-only.

SelectedKeys Property (PGPKeyring Module)

The keys matching the selection criteria.

Syntax

Swift
Objective-C

public var selectedKeys: Array<PGPKey> {
  get {...}
}


@property (nonatomic,readonly,assign,getter=selectedKeyCount) int selectedKeyCount;

- (int)selectedKeyCount;

- (int)selectedKeyBitsInKey:(int)selectedKeyIndex;

- (BOOL)selectedKeyCanEncrypt:(int)selectedKeyIndex;

- (BOOL)selectedKeyCanSign:(int)selectedKeyIndex;

- (NSString*)selectedKeyCurve:(int)selectedKeyIndex;

- (BOOL)selectedKeyEnabled:(int)selectedKeyIndex;

- (NSString*)selectedKeyEncryptionAlgorithm:(int)selectedKeyIndex;

- (long long)selectedKeyHandle:(int)selectedKeyIndex;

- (BOOL)selectedKeyIsPublic:(int)selectedKeyIndex;

- (BOOL)selectedKeyIsSecret:(int)selectedKeyIndex;

- (BOOL)selectedKeyIsSubkey:(int)selectedKeyIndex;

- (NSString*)selectedKeyKeyFP:(int)selectedKeyIndex;

- (NSString*)selectedKeyKeyID:(int)selectedKeyIndex;

- (NSString*)selectedKeyPassphrase:(int)selectedKeyIndex;

- (BOOL)selectedKeyPassphraseValid:(int)selectedKeyIndex;

- (NSString*)selectedKeyPrimaryKeyID:(int)selectedKeyIndex;

- (int)selectedKeyProtection:(int)selectedKeyIndex;

- (NSString*)selectedKeyPublicKeyAlgorithm:(int)selectedKeyIndex;

- (int)selectedKeyQBits:(int)selectedKeyIndex;

- (NSString*)selectedKeyTimestamp:(int)selectedKeyIndex;

- (NSString*)selectedKeyUsername:(int)selectedKeyIndex;

- (NSString*)selectedKeyValidTo:(int)selectedKeyIndex;

- (int)selectedKeyVersion:(int)selectedKeyIndex;

Default Value

Remarks

This property contains all the keys that match the selection filter passed to Select method.

This property is read-only.

Config Method (PGPKeyring Module)

Sets or retrieves a configuration setting.

Syntax

Swift
Objective-C

public func config(configurationString: String) throws -> String

- (NSString*)config:(NSString*)configurationString;

Remarks

Config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

DoAction Method (PGPKeyring Module)

Performs an additional action.

Syntax

Swift
Objective-C

public func doAction(actionID: String, actionParams: String) throws -> String

- (NSString*)doAction:(NSString*)actionID :(NSString*)actionParams;

Remarks

DoAction is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

ExportBytes Method (PGPKeyring Module)

Exports the keyring to a byte array.

Syntax

Swift
Objective-C

public func exportBytes(secret: Bool) throws -> Data

- (NSData*)exportBytes:(BOOL)secret;

Remarks

Use this method to export the keyring to a byte array. PGP software typically uses two files to store keyrings. Use Secret parameter to specify which part of the keyring you would like to export (public or secret).

ExportToFile Method (PGPKeyring Module)

Exports the keyring to disk.

Syntax

Swift
Objective-C

public func exportToFile(fileName: String, secret: Bool) throws -> Void

- (void)exportToFile:(NSString*)fileName :(BOOL)secret;

Remarks

Use this method to export the keyring to disk. PGP software typically uses two files to store keyrings, public and private.

ImportBytes Method (PGPKeyring Module)

Loads a key from a byte array.

Syntax

Swift
Objective-C

public func importBytes(keyring: Data) throws -> Void

- (void)importBytes:(NSData*)keyring;

Remarks

Use this method to load a key, either public or secret, from a byte array.

ImportFromFile Method (PGPKeyring Module)

Loads a key from a file.

Syntax

Swift
Objective-C

public func importFromFile(keyringFile: String) throws -> Void

- (void)importFromFile:(NSString*)keyringFile;

Remarks

Use this method to load a key, either public or secret, from a file.

ImportPinned Method (PGPKeyring Module)

Imports a pinned secret key to the keyring.

Syntax

Swift
Objective-C

public func importPinned() throws -> Void

- (void)importPinned;

Remarks

Use this method to import a key provided via PinnedKey to the keyring. This can be a public or secret key.

Remove Method (PGPKeyring Module)

Removes the specified key from the keyring.

Syntax

Swift
Objective-C

public func remove(index: Int32) throws -> Void

- (void)remove:(int)index;

Remarks

Use this method to remove a key from the keyring. Use Index to pass the index of the key to be removed.

RemoveByID Method (PGPKeyring Module)

Removes key by its ID.

Syntax

Swift
Objective-C

public func removeByID(keyID: String) throws -> Void

- (void)removeByID:(NSString*)keyID;

Remarks

Call this method to remove the specified key from the keyring.

Reset Method (PGPKeyring Module)

Creates a new empty keyring.

Syntax

Swift
Objective-C

public func reset() throws -> Void

- (void)reset;

Remarks

Use this method to initialize a new empty keyring.

Select Method (PGPKeyring Module)

Filters a selection of keys from the keyring using a template.

Syntax

Swift
Objective-C

public func select(filter: String, secretOnly: Bool, maxCount: Int32) throws -> Void

- (void)select:(NSString*)filter :(BOOL)secretOnly :(int)maxCount;

Remarks

Use this method to get a list of keys that satisfy the Filter criteria. The filter should follow the "Name=Value" format, where Name can be one of the following: userid, fp, fingerprint, and keyid.

Set SecretOnly to True to only search for secret keys. MaxCount allows to limit the number of keys returned.

Once the method completes, the keys that match the criteria will be available in SelectedKeys property.

UpdatePinned Method (PGPKeyring Module)

Update a pinned key in the keyring.

Syntax

Swift
Objective-C

public func updatePinned() throws -> Void

- (void)updatePinned;

Remarks

Use this method to update a key provided via PinnedKey in the keyring. This can be a public or secret key.

Error Event (PGPKeyring Module)

Information about errors during PGP key management.

Syntax

Swift
Objective-C

func onError(errorCode: Int32, description: String)

- (void)onError:(int)errorCode :(NSString*)description;

Remarks

The event is fired in case of exceptional conditions during key management.

ErrorCode contains an error code and Description contains a textual description of the error.

Notification Event (PGPKeyring Module)

This event notifies the application about an underlying control flow event.

Syntax

Swift
Objective-C

func onNotification(eventID: String, eventParam: String)

- (void)onNotification:(NSString*)eventID :(NSString*)eventParam;

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

PGPKey Type

This container represents a PGP key.

Remarks

OpenPGP standard supports several types of keys. In our days, a typical OpenPGP keypair actually consists of two cryptographic keys: a primary key and a subkey. The primary key is normally used for signing, while the subkey is used for encryption.

While it is typical for PGP environments to use a primary key/subkey bundle, this is not a must. Sometimes you may come across standalone keys (mainly when dealing with older implementations), as well as whole key trees, each of those carrying a bunch of differently-purposed subkeys bound to the same primary key.

Algorithm-wise, OpenPGP keys also differ. Generally speaking, OpenPGP supports the following public key algorithms: RSA, Elgamal (often incorrectly referred to as DH), DSA, ECDH and ECDSA. When it comes to primary key/subkey bundles, DSA/Elgamal, RSA/RSA and ECDSA/ECDH pairs are typically used. Although there's no restriction on algorithm bundles, and, e.g. a ECDSA/Elgamal key bundle is perfectly possible, such combination is rarely used in practice.

A typical OpenPGP key is associated with some kind of user ID (Username). It is normally represented with a user's e-mail address, while in theory can be any piece of text. The secret part of the OpenPGP keypair is protected with a password (Passphrase).

The following fields are available:

Fields

bitsInKey
Int32 (read-only)
Default Value: 2048

Indicates the key length in bits.

canEncrypt
Bool (read-only)
Default Value: False

Returns True if this key can be used for encryption.

canSign
Bool (read-only)
Default Value: False

Returns True if this key can be used for signing.

curve
String (read-only)
Default Value: ""

Indicates the elliptic curve associated with a EC key.

Supported values:


SB_PGP_CURVE_P256	`P256`
SB_PGP_CURVE_P384	`P384`
SB_PGP_CURVE_P521	`P521`
SB_PGP_CURVE_ED25519	`ED25519`
SB_PGP_CURVE_CURVE25519	`CURVE25519`
SB_PGP_CURVE_BRAINPOOLP256R1	`BRAINPOOLP256`
SB_PGP_CURVE_BRAINPOOLP512R1	`BRAINPOOLP512`

enabled
Bool
Default Value: False

Enables or disables this key for use in encryption or signing operation.

encryptionAlgorithm
String (read-only)
Default Value: "AES128"

Indicates the symmetric algorithm used to encrypt the secret key.

handle
Int64
Default Value: 0

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

isPublic
Bool (read-only)
Default Value: False

Returns True if this key is a public key, and False otherwise.

isSecret
Bool (read-only)
Default Value: False

Returns True if this key is a secret key, and False otherwise.

isSubkey
Bool (read-only)
Default Value: False

Returns True if this key is a subkey of another key, and False otherwise.

keyFP
String (read-only)
Default Value: ""

The 20-byte fingerprint (hash value) of this key.

KeyFP could be used to distinguish two keys with the same KeyID.

keyID
String (read-only)
Default Value: ""

Contains a 8-byte key identifier.

It is quite rare that IDs of two keys collide. If that happens, their fingerprints (KeyFP) can be used for distinguish between the keys. Please note that many PGP implementations show only 4 lowest bytes of the KeyID to the user.

passphrase
String
Default Value: ""

The key protection password.

passphraseValid
Bool (read-only)
Default Value: False

Use this property to check whether the specified is valid and can be used to unlock the secret key.

primaryKeyID
String (read-only)
Default Value: ""

If this key is a subkey ( returns True), this property contains the identifier of the subkey's primary key.

protection
PGPProtectionTypes (read-only)
Default Value: 0

Specifies the level of protection applied to the secret key.

Allowed values:


pptNone	`0`	Key is not encrypted
pptLow	`1`	Only the password hash is used to derive the secret key
pptNormal	`2`	Password hash with salt is used to derive the secret key
pptHigh	`3`	Hash from multiple passwords and salt are used for key derivation

publicKeyAlgorithm
String (read-only)
Default Value: ""

Specifies the asymmetric algorithm of the key.

qBits
Int32 (read-only)
Default Value: 0

The length of the DSA Q (legitimate range: 160-512).

This parameter corresponds to the hash algorithm used with the key. For example, if the value of Q is 256, SHA-256 will be used.

timestamp
String (read-only)
Default Value: ""

Use this property to check the time the key was generated. The date and time are stored and retrieved in Universal Coordinate Time (UTC).

username
String (read-only)
Default Value: ""

Specifies the name of the user bound to this key.

The PGP username is typically represented with a full name and an email address, but generally can be any non-empty string.

validTo
String (read-only)
Default Value: "0"

Provide accurate expiration moment indication. This is different to expires property which only contains expiration time in days in old keys.

version
Int32 (read-only)
Default Value: 0

Indicates the key version.

The key version refers to the version of the public-key packet format as defined in RFC 4880.

Only four versions are currently allowed here: 3, 4, 5 and 6. It is recommended that all new keys are created with version of 6.

Constructors

public init()

Creates an empty PGP key object.

Config Settings (PGPKeyring Module)

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

PGPKeyring Config Settings

Armor: Enables or disables ASCII armouring.

Adjust this setting to enable or disable ASCII armouring on the outgoing messages.

ArmorBoundary: Specifies the armour boundary/title.

Use this setting to specify custom ASCII armouring titles that go after the -----BEGIN and -----END tokens.

ArmorHeaders: Specifies armour headers.

Use this setting to provide custom ASCII armouring (PEM) headers that should be included in the output.

UseLongKeyIDs: Enables long (8-byte) KeyID representation.

Switch this setting on to enable long (8-byte/16-char) representation of KeyIDs. The components use the abbreviated 4-byte/8-char representation by default.

Base Config Settings

ASN1UseGlobalTagCache: Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins: Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse: Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching: Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:


off		No caching (default)
local		Local caching
global		Global caching

Cookies: Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations: Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix: The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE: Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies: Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy: The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent: Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion: The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert: Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter: The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination: Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:


file		File
console		Console
systemlog		System Log (supported for Android only)
debugger		Debugger (supported for VCL for Windows and .Net)

LogDetails: Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:


time		Current time
level		Level
package		Package name
module		Module name
class		Class name
method		Method name
threadid		Thread Id
contenttype		Content type
content		Content
all		All details

LogFile: Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters: Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:


exclude-package		Exclude a package specified in the value
exclude-module		Exclude a module specified in the value
exclude-class		Exclude a class specified in the value
exclude-method		Exclude a method specified in the value
include-package		Include a package specified in the value
include-module		Include a module specified in the value
include-class		Include a class specified in the value
include-method		Include a method specified in the value

LogFlushMode: Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:


none		No flush (caching only)
immediate		Immediate flush (real-time logging)
maxcount		Flush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel: Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:


none		None (by default)
fatal		Severe errors that cause premature termination.
error		Other runtime errors or unexpected conditions.
warning		Use of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
info		Interesting runtime events (startup/shutdown).
debug		Detailed information on flow of through the system.
trace		More detailed information.

LogMaxEventCount: Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode: Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:


none		No rotation
deleteolder		Delete older entries from the cache upon reaching LogMaxEventCount
keepolder		Keep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength: Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth: Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm: Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback: Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion: Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength: Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS: Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:


none		No static DNS rules (default)
local		Local static DNS rules
global		Global static DNS rules

StaticIPAddress[domain]: Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses: Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag: Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup: Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime: Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval: Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom: Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation: Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver: Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages: Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation: An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS: Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom: Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Trappable Errors (PGPKeyring Module)

PGPKeyring Errors

1048577	Invalid parameter (`SB_ERROR_INVALID_PARAMETER`)
1048578	Invalid configuration (`SB_ERROR_INVALID_SETUP`)
1048579	Invalid state (`SB_ERROR_INVALID_STATE`)
1048580	Invalid value (`SB_ERROR_INVALID_VALUE`)
1048581	Private key not found (`SB_ERROR_NO_PRIVATE_KEY`)
1048582	Cancelled by the user (`SB_ERROR_CANCELLED_BY_USER`)
1048583	The file was not found (`SB_ERROR_NO_SUCH_FILE`)
1048584	Unsupported feature or operation (`SB_ERROR_UNSUPPORTED_FEATURE`)
1048585	General error (`SB_ERROR_GENERAL_ERROR`)
27262977	The file was not found (`SB_ERROR_PGP_FILE_NOT_EXISTS`)
27262978	Invalid signing key (`SB_ERROR_PGP_INVALID_KEY`)
27262980	No secret key is available (`SB_ERROR_PGP_NO_SECRET_KEY`)
27262982	The operation is not supported on a subkey (`SB_ERROR_PGP_OPERATION_ON_SUBKEY`)