FTPServer Class

Properties   Methods   Events   Config Settings   Errors  

The FTPServer class provides server-side functionality for FTP and FTPS protocols.

Syntax

class secureblackbox.FTPServer

Remarks

FTPServer supports FTP (File Transfer Protocol) and FTPS (FTP-over-SSL) protocols. The FTPS protocol allows you to securely perform file transfer operations on the server over Transport Layer Security (TLS). TLS is a successor to the now deprecated SSL protocol, although the latter abbreviation is still widely used.

Property List


The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

activeWhether the server is active and can accept incoming connections.
allow_anonymousAllows and disallows anonymous connections.
client_file_entry_access_timeContains the last access time for this file, in UTC.
client_file_entry_creation_timeContains this file's creation time, in UTC.
client_file_entry_entry_formatThe file listing format: cfefUnknown 0 cfefUnix 1 cfefWindows 2 cfefMLSD 3 .
client_file_entry_file_typeThe type of the entry: fetUnknown 0 fetDirectory 1 fetFile 2 fetSymlink 3 fetSpecial 4 fetCurrentDirectory 5 fetParentDirectory 6 fetSocket 7 fetCharDevice 8 fetBlockDevice 9 fetFIFO 10 .
client_file_entry_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
client_file_entry_modification_timeFile last modification date/time.
client_file_entry_nameThe file or directory name.
client_file_entry_pathThe full path to the file or directory.
client_file_entry_principalSpecifies the owner of the file/directory.
client_file_entry_sizeFile size in bytes.
client_file_entry_unix_permsThe file Unix permissions bit mask (e.
client_file_entry_unparsed_nameThe unparsed entry as returned by the server.
data_hostHost address for incoming data channel connections.
data_port_range_fromSpecifies the lower port range bound for passive mode data connections.
data_port_range_toSpecifies the upper port range bound for passive mode data connections.
external_crypto_async_document_idSpecifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.
external_crypto_custom_paramsCustom parameters to be passed to the signing service (uninterpreted).
external_crypto_dataAdditional data to be included in the async state and mirrored back by the requestor.
external_crypto_external_hash_calculationSpecifies whether the message hash is to be calculated at the external endpoint.
external_crypto_hash_algorithmSpecifies the request's signature hash algorithm.
external_crypto_key_idThe ID of the pre-shared key used for DC request authentication.
external_crypto_key_secretThe pre-shared key used for DC request authentication.
external_crypto_methodSpecifies the asynchronous signing method.
external_crypto_modeSpecifies the external cryptography mode.
external_crypto_public_key_algorithmProvide the public key algorithm here if the certificate is not available on the pre-signing stage.
fips_modeReserved.
handshake_timeoutSpecifies the handshake timeout in milliseconds.
hostSpecifies the server host.
implicit_sslEnables or disables implicit SSL mode.
passive_mode_hostThe IP address of the passive mode host.
pinned_client_aead_cipherIndicates whether the encryption algorithm used is an AEAD cipher.
pinned_client_chain_validation_detailsThe details of a certificate chain validation outcome.
pinned_client_chain_validation_resultThe outcome of a certificate chain validation routine.
pinned_client_ciphersuiteThe cipher suite employed by this connection.
pinned_client_client_authenticatedSpecifies whether client authentication was performed during this connection.
pinned_client_client_auth_requestedSpecifies whether client authentication was requested during this connection.
pinned_client_connection_establishedIndicates whether the connection has been established fully.
pinned_client_connection_idThe unique identifier assigned to this connection.
pinned_client_digest_algorithmThe digest algorithm used in a TLS-enabled connection.
pinned_client_encryption_algorithmThe symmetric encryption algorithm used in a TLS-enabled connection.
pinned_client_exportableIndicates whether a TLS connection uses a reduced-strength exportable cipher.
pinned_client_idThe client connection's unique identifier.
pinned_client_key_exchange_algorithmThe key exchange algorithm used in a TLS-enabled connection.
pinned_client_key_exchange_key_bitsThe length of the key exchange key of a TLS-enabled connection.
pinned_client_named_ec_curveThe elliptic curve used in this connection.
pinned_client_pfs_cipherIndicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).
pinned_client_pre_shared_identitySpecifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
pinned_client_pre_shared_identity_hintA hint professed by the server to help the client select the PSK identity to use.
pinned_client_public_key_bitsThe length of the public key.
pinned_client_remote_addressThe client's IP address.
pinned_client_remote_portThe remote port of the client connection.
pinned_client_resumed_sessionIndicates whether a TLS-enabled connection was spawned from another TLS connection.
pinned_client_secure_connectionIndicates whether TLS or SSL is enabled for this connection.
pinned_client_server_authenticatedIndicates whether server authentication was performed during a TLS-enabled connection.
pinned_client_signature_algorithmThe signature algorithm used in a TLS handshake.
pinned_client_symmetric_block_sizeThe block size of the symmetric algorithm used.
pinned_client_symmetric_key_bitsThe key length of the symmetric algorithm used.
pinned_client_total_bytes_receivedThe total number of bytes received over this connection.
pinned_client_total_bytes_sentThe total number of bytes sent over this connection.
pinned_client_validation_logContains the server certificate's chain validation log.
pinned_client_versionIndicates the version of SSL/TLS protocol negotiated during this connection.
pinned_client_cert_countThe number of records in the PinnedClientCert arrays.
pinned_client_cert_bytesReturns the raw certificate data in DER format.
pinned_client_cert_ca_key_idA unique identifier (fingerprint) of the CA certificate's cryptographic key.
pinned_client_cert_fingerprintContains the fingerprint (a hash imprint) of this certificate.
pinned_client_cert_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
pinned_client_cert_issuerThe common name of the certificate issuer (CA), typically a company name.
pinned_client_cert_issuer_rdnA list of Property=Value pairs that uniquely identify the certificate issuer.
pinned_client_cert_key_algorithmSpecifies the public key algorithm of this certificate.
pinned_client_cert_key_bitsReturns the length of the public key in bits.
pinned_client_cert_key_fingerprintReturns a SHA1 fingerprint of the public key contained in the certificate.
pinned_client_cert_key_usageIndicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.
pinned_client_cert_public_key_bytesContains the certificate's public key in DER format.
pinned_client_cert_self_signedIndicates whether the certificate is self-signed (root) or signed by an external CA.
pinned_client_cert_serial_numberReturns the certificate's serial number.
pinned_client_cert_sig_algorithmIndicates the algorithm that was used by the CA to sign this certificate.
pinned_client_cert_subjectThe common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.
pinned_client_cert_subject_key_idContains a unique identifier of the certificate's cryptographic key.
pinned_client_cert_subject_rdnA list of Property=Value pairs that uniquely identify the certificate holder (subject).
pinned_client_cert_valid_fromThe time point at which the certificate becomes valid, in UTC.
pinned_client_cert_valid_toThe time point at which the certificate expires, in UTC.
portThe port number to listen for incoming connections on.
read_onlyMakes the server's file system read-only for all users.
root_directorySpecifies the server's root directory.
security_optionsVarious options of the secure connection.
session_timeoutSpecifies the session timeout in milliseconds.
socket_incoming_speed_limitThe maximum number of bytes to read from the socket, per second.
socket_local_addressThe local network interface to bind the socket to.
socket_local_portThe local port number to bind the socket to.
socket_outgoing_speed_limitThe maximum number of bytes to write to the socket, per second.
socket_timeoutThe maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.
socket_use_ipv6Enables or disables IP protocol version 6.
tls_server_cert_countThe number of records in the TLSServerCert arrays.
tls_server_cert_bytesReturns the raw certificate data in DER format.
tls_server_cert_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
tls_auto_validate_certificatesSpecifies whether server-side TLS certificates should be validated automatically using internal validation rules.
tls_base_configurationSelects the base configuration for the TLS settings.
tls_ciphersuitesA list of ciphersuites separated with commas or semicolons.
tls_client_authEnables or disables certificate-based client authentication.
tls_ec_curvesDefines the elliptic curves to enable.
tls_extensionsProvides access to TLS extensions.
tls_force_resume_if_destination_changesWhether to force TLS session resumption when the destination address changes.
tls_pre_shared_identityDefines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.
tls_pre_shared_keyContains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.
tls_pre_shared_key_ciphersuiteDefines the ciphersuite used for PSK (Pre-Shared Key) negotiation.
tls_renegotiation_attack_prevention_modeSelects the renegotiation attack prevention mechanism.
tls_revocation_checkSpecifies the kind(s) of revocation check to perform.
tls_ssl_optionsVarious SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.
tls_tls_modeSpecifies the TLS mode to use.
tls_use_extended_master_secretEnables the Extended Master Secret Extension, as defined in RFC 7627.
tls_use_session_resumptionEnables or disables the TLS session resumption capability.
tls_versionsThe SSL/TLS versions to enable by default.
user_countThe number of records in the User arrays.
user_associated_dataContains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.
user_base_pathBase path for this user in the server's file system.
user_dataContains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.
user_handleAllows to get or set a 'handle', a unique identifier of the underlying property object.
user_hash_algorithmSpecifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.
user_incoming_speed_limitSpecifies the incoming speed limit for this user.
user_outgoing_speed_limitSpecifies the outgoing speed limit for this user.
user_passwordThe user's authentication password.
user_shared_secretContains the user's secret key, which is essentially a shared secret between the client and server.
user_usernameThe registered name (login) of the user.
use_utf8Enables or disables UTF8 file name conversions.

Method List


The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

cleanupCleans up the server environment by purging expired sessions and cleaning caches.
configSets or retrieves a configuration setting.
do_actionPerforms an additional action.
drop_clientTerminates a client connection.
get_client_bufferObtains a pending connection buffer.
list_clientsEnumerates the connected clients.
pin_clientTakes a snapshot of the connection's properties.
resetResets the class settings.
set_client_bufferCommits a data buffer to the connection.
set_client_file_entryCommits a file entry to the connection.
startStarts the server.
stopStops the server.

Event List


The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

on_acceptReports an incoming connection.
on_after_change_directorySignals the completion of a directory change operation.
on_after_create_directorySignals the completion of a directory creation operation.
on_after_remove_directorySignals the completion of a directory removal operation.
on_after_remove_fileSignals the completion of a file removal operation.
on_after_rename_fileSignals the completion of a file renaming operation.
on_after_request_attributesSignals the completion of an attribute request.
on_auth_attemptFires when a connected client makes an authentication attempt.
on_before_change_directoryNotifies about an incoming change directory request.
on_before_create_directoryNotifies about an incoming create directory request.
on_before_download_fileNotifies about an incoming file download request.
on_before_findNotifies about an incoming file listing request.
on_before_remove_directoryNotifies about an incoming directory removal request.
on_before_remove_fileNotifies about an incoming file removal request.
on_before_rename_fileNotifies about an incoming file rename request.
on_before_request_attributesNotifies about an incoming attributes request.
on_before_send_replyNotifies the application of a command reply being sent.
on_before_upload_fileNotifies about an incoming file upload request.
on_change_directoryAn override for a directory change operation.
on_command_processedSignals that a command has been processed by the server.
on_command_receivedSignals that a command has been received from the client.
on_connectReports an accepted connection.
on_create_directoryAn override for a directory creation operation.
on_disconnectFires to report a disconnected client.
on_download_beginThe class fires this event to notify the application about the start of a file download.
on_download_endReports the completion of the download operation.
on_download_fileAn override for a file download initiation operation.
on_download_progressReports the progress of an active download operation.
on_errorInformation about errors during data delivery.
on_external_signHandles remote or external signing initiated by the server protocol.
on_find_closeSignals the completion of a directory listing request.
on_find_initAn override for a directory listing initiation operation.
on_find_nextAn override for a directory listing entry request operation.
on_notificationThis event notifies the application about an underlying control flow event.
on_read_fileRequests a piece of file data from the application.
on_remove_directoryAn override for a directory removal operation.
on_remove_fileAn override for a file remove operation.
on_rename_fileAn override for a file rename operation.
on_request_attributesAn override for an attribute request.
on_tls_cert_validateFires when a client certificate needs to be validated.
on_tls_establishedReports the setup of a TLS session.
on_tls_handshakeFires when a newly established client connection initiates a TLS handshake.
on_tls_pskRequests a pre-shared key for TLS-PSK.
on_tls_shutdownReports closure of a TLS session.
on_transfer_completedThis event is fired when a customized upload or download operation completes.
on_upload_beginThe server fires this event to notify the application about the start of a file upload operation.
on_upload_endReports the completion of the upload operation.
on_upload_fileAn override for a file upload initiation operation.
on_upload_progressReports the progress of an active upload operation.
on_write_fileHands a piece of file data to the application.

Config Settings


The following is a list of config settings for the class with short descriptions. Click on the links for further details.

ActiveChannelThe channel to which the event that is being invoked corresponds.
ClientAuthEnables or disables certificate-based client authentication.
ControlChannelLog[i]Returns the control channel log for a connection.
DualStackAllows the use of ip4 and ip6 simultaneously.
MessageTable[i]Provides access to error code descriptions.
RefreshUsersEnables or disables real-time propagation of user information.
SecurityOptionsFacilitates fine-tuning of lower-level security settings.
ASN1UseGlobalTagCacheControls whether ASN.1 module should use a global object cache.
AssignSystemSmartCardPinsSpecifies whether CSP-level PINs should be assigned to CNG keys.
CheckKeyIntegrityBeforeUseEnables or disable private key integrity check before use.
CookieCachingSpecifies whether a cookie cache should be used for HTTP(S) transports.
CookiesGets or sets local cookies for the class.
DefDeriveKeyIterationsSpecifies the default key derivation algorithm iteration count.
DNSLocalSuffixThe suffix to assign for TLD names.
EnableClientSideSSLFFDHEEnables or disables finite field DHE key exchange support in TLS clients.
GlobalCookiesGets or sets global cookies for all the HTTP transports.
HardwareCryptoUsePolicyThe hardware crypto usage policy.
HttpUserAgentSpecifies the user agent name to be used by all HTTP clients.
HttpVersionThe HTTP version to use in any inner HTTP client classes created.
IgnoreExpiredMSCTLSigningCertWhether to tolerate the expired Windows Update signing certificate.
ListDelimiterThe delimiter character for multi-element lists.
LogDestinationSpecifies the debug log destination.
LogDetailsSpecifies the debug log details to dump.
LogFileSpecifies the debug log filename.
LogFiltersSpecifies the debug log filters.
LogFlushModeSpecifies the log flush mode.
LogLevelSpecifies the debug log level.
LogMaxEventCountSpecifies the maximum number of events to cache before further action is taken.
LogRotationModeSpecifies the log rotation mode.
MaxASN1BufferLengthSpecifies the maximal allowed length for ASN.1 primitive tag data.
MaxASN1TreeDepthSpecifies the maximal depth for processed ASN.1 trees.
OCSPHashAlgorithmSpecifies the hash algorithm to be used to identify certificates in OCSP requests.
OldClientSideRSAFallbackSpecifies whether the SSH client should use a SHA1 fallback.
ProductVersionReturns the version of the SecureBlackbox library.
ServerSSLDHKeyLengthSets the size of the TLS DHE key exchange group.
StaticDNSSpecifies whether static DNS rules should be used.
StaticIPAddress[domain]Gets or sets an IP address for the specified domain name.
StaticIPAddressesGets or sets all the static DNS rules.
TagAllows to store any custom data.
TLSSessionGroupSpecifies the group name of TLS sessions to be used for session resumption.
TLSSessionLifetimeSpecifies lifetime in seconds of the cached TLS session.
TLSSessionPurgeIntervalSpecifies how often the session cache should remove the expired TLS sessions.
UseInternalRandomSwitches between SecureBlackbox-own and platform PRNGs.
UseLegacyAdESValidationEnables legacy AdES validation mode.
UseOwnDNSResolverSpecifies whether the client classes should use own DNS resolver.
UseSharedSystemStoragesSpecifies whether the validation engine should use a global per-process copy of the system certificate stores.
UseSystemNativeSizeCalculationAn internal CryptoAPI access tweak.
UseSystemOAEPAndPSSEnforces or disables the use of system-driven RSA OAEP and PSS computations.
UseSystemRandomEnables or disables the use of the OS PRNG.

active Property

Whether the server is active and can accept incoming connections.

Syntax

def get_active() -> bool: ...

active = property(get_active, None)

Default Value

FALSE

Remarks

This read-only property returns True if the FTPS server is running and listening for incoming connections, and False otherwise.

This property is read-only.

allow_anonymous Property

Allows and disallows anonymous connections.

Syntax

def get_allow_anonymous() -> bool: ...
def set_allow_anonymous(value: bool) -> None: ...

allow_anonymous = property(get_allow_anonymous, set_allow_anonymous)

Default Value

FALSE

Remarks

Use this property to enable and disable support for anonymous connections.

client_file_entry_access_time Property

Contains the last access time for this file, in UTC.

Syntax

def get_client_file_entry_access_time() -> str: ...
def set_client_file_entry_access_time(value: str) -> None: ...

client_file_entry_access_time = property(get_client_file_entry_access_time, set_client_file_entry_access_time)

Default Value

""

Remarks

Contains the last access time for this file, in UTC.

client_file_entry_creation_time Property

Contains this file's creation time, in UTC.

Syntax

def get_client_file_entry_creation_time() -> str: ...
def set_client_file_entry_creation_time(value: str) -> None: ...

client_file_entry_creation_time = property(get_client_file_entry_creation_time, set_client_file_entry_creation_time)

Default Value

""

Remarks

Contains this file's creation time, in UTC.

client_file_entry_entry_format Property

The file listing format: cfefUnknown 0 cfefUnix 1 cfefWindows 2 cfefMLSD 3 .

Syntax

def get_client_file_entry_entry_format() -> int: ...
def set_client_file_entry_entry_format(value: int) -> None: ...

client_file_entry_entry_format = property(get_client_file_entry_entry_format, set_client_file_entry_entry_format)

Default Value

0

Remarks

The file listing format:

cfefUnknown0
cfefUnix1
cfefWindows2
cfefMLSD3

client_file_entry_file_type Property

The type of the entry: fetUnknown 0 fetDirectory 1 fetFile 2 fetSymlink 3 fetSpecial 4 fetCurrentDirectory 5 fetParentDirectory 6 fetSocket 7 fetCharDevice 8 fetBlockDevice 9 fetFIFO 10 .

Syntax

def get_client_file_entry_file_type() -> int: ...
def set_client_file_entry_file_type(value: int) -> None: ...

client_file_entry_file_type = property(get_client_file_entry_file_type, set_client_file_entry_file_type)

Default Value

0

Remarks

The type of the entry:

fetUnknown0
fetDirectory1
fetFile2
fetSymlink3
fetSpecial4
fetCurrentDirectory5
fetParentDirectory6
fetSocket7
fetCharDevice8
fetBlockDevice9
fetFIFO10

client_file_entry_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_client_file_entry_handle() -> int: ...
def set_client_file_entry_handle(value: int) -> None: ...

client_file_entry_handle = property(get_client_file_entry_handle, set_client_file_entry_handle)

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

client_file_entry_modification_time Property

File last modification date/time.

Syntax

def get_client_file_entry_modification_time() -> str: ...
def set_client_file_entry_modification_time(value: str) -> None: ...

client_file_entry_modification_time = property(get_client_file_entry_modification_time, set_client_file_entry_modification_time)

Default Value

""

Remarks

File last modification date/time.

client_file_entry_name Property

The file or directory name.

Syntax

def get_client_file_entry_name() -> str: ...
def set_client_file_entry_name(value: str) -> None: ...

client_file_entry_name = property(get_client_file_entry_name, set_client_file_entry_name)

Default Value

""

Remarks

The file or directory name.

client_file_entry_path Property

The full path to the file or directory.

Syntax

def get_client_file_entry_path() -> str: ...
def set_client_file_entry_path(value: str) -> None: ...

client_file_entry_path = property(get_client_file_entry_path, set_client_file_entry_path)

Default Value

""

Remarks

The full path to the file or directory.

client_file_entry_principal Property

Specifies the owner of the file/directory.

Syntax

def get_client_file_entry_principal() -> str: ...
def set_client_file_entry_principal(value: str) -> None: ...

client_file_entry_principal = property(get_client_file_entry_principal, set_client_file_entry_principal)

Default Value

""

Remarks

Specifies the owner of the file/directory.

Note: in earlier versions this property was called Owner. It was renamed to Principal to avoid clashes with certain SDK namings.

client_file_entry_size Property

File size in bytes.

Syntax

def get_client_file_entry_size() -> int: ...
def set_client_file_entry_size(value: int) -> None: ...

client_file_entry_size = property(get_client_file_entry_size, set_client_file_entry_size)

Default Value

0

Remarks

File size in bytes.

client_file_entry_unix_perms Property

The file Unix permissions bit mask (e.

Syntax

def get_client_file_entry_unix_perms() -> int: ...
def set_client_file_entry_unix_perms(value: int) -> None: ...

client_file_entry_unix_perms = property(get_client_file_entry_unix_perms, set_client_file_entry_unix_perms)

Default Value

511

Remarks

The file Unix permissions bit mask (e.g. rwxrwxrwx=511 (0777); rwxr--r--=484 (0744)).

client_file_entry_unparsed_name Property

The unparsed entry as returned by the server.

Syntax

def get_client_file_entry_unparsed_name() -> str: ...
def set_client_file_entry_unparsed_name(value: str) -> None: ...

client_file_entry_unparsed_name = property(get_client_file_entry_unparsed_name, set_client_file_entry_unparsed_name)

Default Value

""

Remarks

The unparsed entry as returned by the server. Sometimes this is also known as "long name".

data_host Property

Host address for incoming data channel connections.

Syntax

def get_data_host() -> str: ...
def set_data_host(value: str) -> None: ...

data_host = property(get_data_host, set_data_host)

Default Value

""

Remarks

Use this property to specify the address for incoming data channel connections, if it is different to host.

In some network environments, in particular, where the server is behind a NAT, there may be a requirement to use a different host address for data connections.

data_port_range_from Property

Specifies the lower port range bound for passive mode data connections.

Syntax

def get_data_port_range_from() -> int: ...
def set_data_port_range_from(value: int) -> None: ...

data_port_range_from = property(get_data_port_range_from, set_data_port_range_from)

Default Value

0

Remarks

Use this property in combination with DataPortRangeT to limit the port range for passive mode data connections. The value of 0 (zero) stands for no lower bound.

data_port_range_to Property

Specifies the upper port range bound for passive mode data connections.

Syntax

def get_data_port_range_to() -> int: ...
def set_data_port_range_to(value: int) -> None: ...

data_port_range_to = property(get_data_port_range_to, set_data_port_range_to)

Default Value

0

Remarks

Use this property in combination with DataPortRangeFrom to limit the port range for passive mode data connections. The value of 0 (zero) stands for no upper bound.

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

SB_HASH_ALGORITHM_SHA1SHA1
SB_HASH_ALGORITHM_SHA224SHA224
SB_HASH_ALGORITHM_SHA256SHA256
SB_HASH_ALGORITHM_SHA384SHA384
SB_HASH_ALGORITHM_SHA512SHA512
SB_HASH_ALGORITHM_MD2MD2
SB_HASH_ALGORITHM_MD4MD4
SB_HASH_ALGORITHM_MD5MD5
SB_HASH_ALGORITHM_RIPEMD160RIPEMD160
SB_HASH_ALGORITHM_CRC32CRC32
SB_HASH_ALGORITHM_SSL3SSL3
SB_HASH_ALGORITHM_GOST_R3411_1994GOST1994
SB_HASH_ALGORITHM_WHIRLPOOLWHIRLPOOL
SB_HASH_ALGORITHM_POLY1305POLY1305
SB_HASH_ALGORITHM_SHA3_224SHA3_224
SB_HASH_ALGORITHM_SHA3_256SHA3_256
SB_HASH_ALGORITHM_SHA3_384SHA3_384
SB_HASH_ALGORITHM_SHA3_512SHA3_512
SB_HASH_ALGORITHM_BLAKE2S_128BLAKE2S_128
SB_HASH_ALGORITHM_BLAKE2S_160BLAKE2S_160
SB_HASH_ALGORITHM_BLAKE2S_224BLAKE2S_224
SB_HASH_ALGORITHM_BLAKE2S_256BLAKE2S_256
SB_HASH_ALGORITHM_BLAKE2B_160BLAKE2B_160
SB_HASH_ALGORITHM_BLAKE2B_256BLAKE2B_256
SB_HASH_ALGORITHM_BLAKE2B_384BLAKE2B_384
SB_HASH_ALGORITHM_BLAKE2B_512BLAKE2B_512
SB_HASH_ALGORITHM_SHAKE_128SHAKE_128
SB_HASH_ALGORITHM_SHAKE_256SHAKE_256
SB_HASH_ALGORITHM_SHAKE_128_LENSHAKE_128_LEN
SB_HASH_ALGORITHM_SHAKE_256_LENSHAKE_256_LEN

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

asmdPKCS10
asmdPKCS71

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

ecmDefaultThe default value (0)
ecmDisabledDo not use DC or external signing (1)
ecmGenericGeneric external signing with the OnExternalSign event (2)
ecmDCAuthDCAuth signing (3)
ecmDCAuthJSONDCAuth signing in JSON format (4)

external_crypto_public_key_algorithm Property

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

""

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

handshake_timeout Property

Specifies the handshake timeout in milliseconds.

Syntax

def get_handshake_timeout() -> int: ...
def set_handshake_timeout(value: int) -> None: ...

handshake_timeout = property(get_handshake_timeout, set_handshake_timeout)

Default Value

20000

Remarks

Use this property to set the TLS handshake timeout.

host Property

Specifies the server host.

Syntax

def get_host() -> str: ...
def set_host(value: str) -> None: ...

host = property(get_host, set_host)

Default Value

""

Remarks

Use this property to specify the IP address on which to listen for incoming FTP connections. Use port to specify the listening port number.

implicit_ssl Property

Enables or disables implicit SSL mode.

Syntax

def get_implicit_ssl() -> bool: ...
def set_implicit_ssl(value: bool) -> None: ...

implicit_ssl = property(get_implicit_ssl, set_implicit_ssl)

Default Value

FALSE

Remarks

The server can only work in one mode, explicit or implicit. Explicit mode, also called AUTH TLS, supports both TLS and plain connections. Implicit mode, also called 'dedicated port mode,' only supports TLS connections.

passive_mode_host Property

The IP address of the passive mode host.

Syntax

def get_passive_mode_host() -> str: ...
def set_passive_mode_host(value: str) -> None: ...

passive_mode_host = property(get_passive_mode_host, set_passive_mode_host)

Default Value

""

Remarks

Use this property to specify the address on which to listen for passive mode connections.

pinned_client_aead_cipher Property

Indicates whether the encryption algorithm used is an AEAD cipher.

Syntax

def get_pinned_client_aead_cipher() -> bool: ...

pinned_client_aead_cipher = property(get_pinned_client_aead_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the encryption algorithm used is an AEAD cipher.

This property is read-only.

pinned_client_chain_validation_details Property

The details of a certificate chain validation outcome.

Syntax

def get_pinned_client_chain_validation_details() -> int: ...

pinned_client_chain_validation_details = property(get_pinned_client_chain_validation_details, None)

Default Value

0

Remarks

The details of a certificate chain validation outcome. They may often suggest the reasons that contributed to the overall validation result.

Returns a bit mask of the following options:

cvrBadData0x0001One or more certificates in the validation path are malformed

cvrRevoked0x0002One or more certificates are revoked

cvrNotYetValid0x0004One or more certificates are not yet valid

cvrExpired0x0008One or more certificates are expired

cvrInvalidSignature0x0010A certificate contains a non-valid digital signature

cvrUnknownCA0x0020A CA certificate for one or more certificates has not been found (chain incomplete)

cvrCAUnauthorized0x0040One of the CA certificates are not authorized to act as CA

cvrCRLNotVerified0x0080One or more CRLs could not be verified

cvrOCSPNotVerified0x0100One or more OCSP responses could not be verified

cvrIdentityMismatch0x0200The identity protected by the certificate (a TLS endpoint or an e-mail addressee) does not match what is recorded in the certificate

cvrNoKeyUsage0x0400A mandatory key usage is not enabled in one of the chain certificates

cvrBlocked0x0800One or more certificates are blocked

cvrFailure0x1000General validation failure

cvrChainLoop0x2000Chain loop: one of the CA certificates recursively signs itself

cvrWeakAlgorithm0x4000A weak algorithm is used in one of certificates or revocation elements

cvrUserEnforced0x8000The chain was considered invalid following intervention from a user code

This property is read-only.

pinned_client_chain_validation_result Property

The outcome of a certificate chain validation routine.

Syntax

def get_pinned_client_chain_validation_result() -> int: ...

pinned_client_chain_validation_result = property(get_pinned_client_chain_validation_result, None)

Default Value

0

Remarks

The outcome of a certificate chain validation routine.

Available options:

cvtValid0The chain is valid

cvtValidButUntrusted1The chain is valid, but the root certificate is not trusted

cvtInvalid2The chain is not valid (some of certificates are revoked, expired, or contain an invalid signature)

cvtCantBeEstablished3The validity of the chain cannot be established because of missing or unavailable validation information (certificates, CRLs, or OCSP responses)

Use the ValidationLog property to access the detailed validation log.

This property is read-only.

pinned_client_ciphersuite Property

The cipher suite employed by this connection.

Syntax

def get_pinned_client_ciphersuite() -> str: ...

pinned_client_ciphersuite = property(get_pinned_client_ciphersuite, None)

Default Value

""

Remarks

The cipher suite employed by this connection.

For TLS connections, this property returns the ciphersuite that was/is employed by the connection.

This property is read-only.

pinned_client_client_authenticated Property

Specifies whether client authentication was performed during this connection.

Syntax

def get_pinned_client_client_authenticated() -> bool: ...

pinned_client_client_authenticated = property(get_pinned_client_client_authenticated, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was performed during this connection.

This property is read-only.

pinned_client_client_auth_requested Property

Specifies whether client authentication was requested during this connection.

Syntax

def get_pinned_client_client_auth_requested() -> bool: ...

pinned_client_client_auth_requested = property(get_pinned_client_client_auth_requested, None)

Default Value

FALSE

Remarks

Specifies whether client authentication was requested during this connection.

This property is read-only.

pinned_client_connection_established Property

Indicates whether the connection has been established fully.

Syntax

def get_pinned_client_connection_established() -> bool: ...

pinned_client_connection_established = property(get_pinned_client_connection_established, None)

Default Value

FALSE

Remarks

Indicates whether the connection has been established fully.

This property is read-only.

pinned_client_connection_id Property

The unique identifier assigned to this connection.

Syntax

def get_pinned_client_connection_id() -> bytes: ...

pinned_client_connection_id = property(get_pinned_client_connection_id, None)

Remarks

The unique identifier assigned to this connection.

This property is read-only.

pinned_client_digest_algorithm Property

The digest algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_digest_algorithm() -> str: ...

pinned_client_digest_algorithm = property(get_pinned_client_digest_algorithm, None)

Default Value

""

Remarks

The digest algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_encryption_algorithm Property

The symmetric encryption algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_encryption_algorithm() -> str: ...

pinned_client_encryption_algorithm = property(get_pinned_client_encryption_algorithm, None)

Default Value

""

Remarks

The symmetric encryption algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_exportable Property

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

Syntax

def get_pinned_client_exportable() -> bool: ...

pinned_client_exportable = property(get_pinned_client_exportable, None)

Default Value

FALSE

Remarks

Indicates whether a TLS connection uses a reduced-strength exportable cipher.

This property is read-only.

pinned_client_id Property

The client connection's unique identifier.

Syntax

def get_pinned_client_id() -> int: ...

pinned_client_id = property(get_pinned_client_id, None)

Default Value

-1

Remarks

The client connection's unique identifier. This value is used throughout to refer to a particular client connection.

This property is read-only.

pinned_client_key_exchange_algorithm Property

The key exchange algorithm used in a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_algorithm() -> str: ...

pinned_client_key_exchange_algorithm = property(get_pinned_client_key_exchange_algorithm, None)

Default Value

""

Remarks

The key exchange algorithm used in a TLS-enabled connection.

This property is read-only.

pinned_client_key_exchange_key_bits Property

The length of the key exchange key of a TLS-enabled connection.

Syntax

def get_pinned_client_key_exchange_key_bits() -> int: ...

pinned_client_key_exchange_key_bits = property(get_pinned_client_key_exchange_key_bits, None)

Default Value

0

Remarks

The length of the key exchange key of a TLS-enabled connection.

This property is read-only.

pinned_client_named_ec_curve Property

The elliptic curve used in this connection.

Syntax

def get_pinned_client_named_ec_curve() -> str: ...

pinned_client_named_ec_curve = property(get_pinned_client_named_ec_curve, None)

Default Value

""

Remarks

The elliptic curve used in this connection.

This property is read-only.

pinned_client_pfs_cipher Property

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

Syntax

def get_pinned_client_pfs_cipher() -> bool: ...

pinned_client_pfs_cipher = property(get_pinned_client_pfs_cipher, None)

Default Value

FALSE

Remarks

Indicates whether the chosen ciphersuite provides perfect forward secrecy (PFS).

This property is read-only.

pinned_client_pre_shared_identity Property

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_pinned_client_pre_shared_identity() -> str: ...

pinned_client_pre_shared_identity = property(get_pinned_client_pre_shared_identity, None)

Default Value

""

Remarks

Specifies the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

This property is read-only.

pinned_client_pre_shared_identity_hint Property

A hint professed by the server to help the client select the PSK identity to use.

Syntax

def get_pinned_client_pre_shared_identity_hint() -> str: ...

pinned_client_pre_shared_identity_hint = property(get_pinned_client_pre_shared_identity_hint, None)

Default Value

""

Remarks

A hint professed by the server to help the client select the PSK identity to use.

This property is read-only.

pinned_client_public_key_bits Property

The length of the public key.

Syntax

def get_pinned_client_public_key_bits() -> int: ...

pinned_client_public_key_bits = property(get_pinned_client_public_key_bits, None)

Default Value

0

Remarks

The length of the public key.

This property is read-only.

pinned_client_remote_address Property

The client's IP address.

Syntax

def get_pinned_client_remote_address() -> str: ...

pinned_client_remote_address = property(get_pinned_client_remote_address, None)

Default Value

""

Remarks

The client's IP address.

This property is read-only.

pinned_client_remote_port Property

The remote port of the client connection.

Syntax

def get_pinned_client_remote_port() -> int: ...

pinned_client_remote_port = property(get_pinned_client_remote_port, None)

Default Value

0

Remarks

The remote port of the client connection.

This property is read-only.

pinned_client_resumed_session Property

Indicates whether a TLS-enabled connection was spawned from another TLS connection.

Syntax

def get_pinned_client_resumed_session() -> bool: ...

pinned_client_resumed_session = property(get_pinned_client_resumed_session, None)

Default Value

FALSE

Remarks

Indicates whether a TLS-enabled connection was spawned from another TLS connection

This property is read-only.

pinned_client_secure_connection Property

Indicates whether TLS or SSL is enabled for this connection.

Syntax

def get_pinned_client_secure_connection() -> bool: ...

pinned_client_secure_connection = property(get_pinned_client_secure_connection, None)

Default Value

FALSE

Remarks

Indicates whether TLS or SSL is enabled for this connection.

This property is read-only.

pinned_client_server_authenticated Property

Indicates whether server authentication was performed during a TLS-enabled connection.

Syntax

def get_pinned_client_server_authenticated() -> bool: ...

pinned_client_server_authenticated = property(get_pinned_client_server_authenticated, None)

Default Value

FALSE

Remarks

Indicates whether server authentication was performed during a TLS-enabled connection.

This property is read-only.

pinned_client_signature_algorithm Property

The signature algorithm used in a TLS handshake.

Syntax

def get_pinned_client_signature_algorithm() -> str: ...

pinned_client_signature_algorithm = property(get_pinned_client_signature_algorithm, None)

Default Value

""

Remarks

The signature algorithm used in a TLS handshake.

This property is read-only.

pinned_client_symmetric_block_size Property

The block size of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_block_size() -> int: ...

pinned_client_symmetric_block_size = property(get_pinned_client_symmetric_block_size, None)

Default Value

0

Remarks

The block size of the symmetric algorithm used.

This property is read-only.

pinned_client_symmetric_key_bits Property

The key length of the symmetric algorithm used.

Syntax

def get_pinned_client_symmetric_key_bits() -> int: ...

pinned_client_symmetric_key_bits = property(get_pinned_client_symmetric_key_bits, None)

Default Value

0

Remarks

The key length of the symmetric algorithm used.

This property is read-only.

pinned_client_total_bytes_received Property

The total number of bytes received over this connection.

Syntax

def get_pinned_client_total_bytes_received() -> int: ...

pinned_client_total_bytes_received = property(get_pinned_client_total_bytes_received, None)

Default Value

0

Remarks

The total number of bytes received over this connection.

This property is read-only.

pinned_client_total_bytes_sent Property

The total number of bytes sent over this connection.

Syntax

def get_pinned_client_total_bytes_sent() -> int: ...

pinned_client_total_bytes_sent = property(get_pinned_client_total_bytes_sent, None)

Default Value

0

Remarks

The total number of bytes sent over this connection.

This property is read-only.

pinned_client_validation_log Property

Contains the server certificate's chain validation log.

Syntax

def get_pinned_client_validation_log() -> str: ...

pinned_client_validation_log = property(get_pinned_client_validation_log, None)

Default Value

""

Remarks

Contains the server certificate's chain validation log. This information may be very useful in investigating chain validation failures.

This property is read-only.

pinned_client_version Property

Indicates the version of SSL/TLS protocol negotiated during this connection.

Syntax

def get_pinned_client_version() -> str: ...

pinned_client_version = property(get_pinned_client_version, None)

Default Value

""

Remarks

Indicates the version of SSL/TLS protocol negotiated during this connection.

This property is read-only.

pinned_client_cert_count Property

The number of records in the PinnedClientCert arrays.

Syntax

def get_pinned_client_cert_count() -> int: ...

pinned_client_cert_count = property(get_pinned_client_cert_count, None)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at pinned_client_cert_count - 1.

This property is read-only.

pinned_client_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_pinned_client_cert_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_ca_key_id Property

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Syntax

def get_pinned_client_cert_ca_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

A unique identifier (fingerprint) of the CA certificate's cryptographic key.

Authority Key Identifier is a certificate extension which allows identification of certificates belonging to the same issuer, but with different public keys. It is a de-facto standard to include this extension in all certificates to facilitate chain building.

This setting cannot be set when generating a certificate as it always derives from another certificate property. CertificateManager generates this setting automatically if enough information is available to it: for self-signed certificates, this value is copied from the pinned_client_cert_subject_key_id setting, and for lower-level certificates, from the parent certificate's subject key ID extension.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_fingerprint Property

Contains the fingerprint (a hash imprint) of this certificate.

Syntax

def get_pinned_client_cert_fingerprint(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Contains the fingerprint (a hash imprint) of this certificate.

While there is no formal standard defining what a fingerprint is, a SHA1 hash of the certificate's DER-encoded body is typically used.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_pinned_client_cert_handle(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer Property

The common name of the certificate issuer (CA), typically a company name.

Syntax

def get_pinned_client_cert_issuer(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate issuer (CA), typically a company name. This is part of a larger set of credentials available via pinned_client_cert_issuer_rdn.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_issuer_rdn Property

A list of Property=Value pairs that uniquely identify the certificate issuer.

Syntax

def get_pinned_client_cert_issuer_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A list of Property=Value pairs that uniquely identify the certificate issuer.

Example: /C=US/O=Nationwide CA/CN=Web Certification Authority

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_algorithm Property

Specifies the public key algorithm of this certificate.

Syntax

def get_pinned_client_cert_key_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

"0"

Remarks

Specifies the public key algorithm of this certificate.

SB_CERT_ALGORITHM_ID_RSA_ENCRYPTIONrsaEncryption
SB_CERT_ALGORITHM_MD2_RSA_ENCRYPTIONmd2withRSAEncryption
SB_CERT_ALGORITHM_MD5_RSA_ENCRYPTIONmd5withRSAEncryption
SB_CERT_ALGORITHM_SHA1_RSA_ENCRYPTIONsha1withRSAEncryption
SB_CERT_ALGORITHM_ID_DSAid-dsa
SB_CERT_ALGORITHM_ID_DSA_SHA1id-dsa-with-sha1
SB_CERT_ALGORITHM_DH_PUBLICdhpublicnumber
SB_CERT_ALGORITHM_SHA224_RSA_ENCRYPTIONsha224WithRSAEncryption
SB_CERT_ALGORITHM_SHA256_RSA_ENCRYPTIONsha256WithRSAEncryption
SB_CERT_ALGORITHM_SHA384_RSA_ENCRYPTIONsha384WithRSAEncryption
SB_CERT_ALGORITHM_SHA512_RSA_ENCRYPTIONsha512WithRSAEncryption
SB_CERT_ALGORITHM_ID_RSAPSSid-RSASSA-PSS
SB_CERT_ALGORITHM_ID_RSAOAEPid-RSAES-OAEP
SB_CERT_ALGORITHM_RSASIGNATURE_RIPEMD160ripemd160withRSA
SB_CERT_ALGORITHM_ID_ELGAMALelGamal
SB_CERT_ALGORITHM_SHA1_ECDSAecdsa-with-SHA1
SB_CERT_ALGORITHM_RECOMMENDED_ECDSAecdsa-recommended
SB_CERT_ALGORITHM_SHA224_ECDSAecdsa-with-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSAecdsa-with-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSAecdsa-with-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSAecdsa-with-SHA512
SB_CERT_ALGORITHM_ECid-ecPublicKey
SB_CERT_ALGORITHM_SPECIFIED_ECDSAecdsa-specified
SB_CERT_ALGORITHM_GOST_R3410_1994id-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3410_2001id-GostR3410-2001
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_1994id-GostR3411-94-with-GostR3410-94
SB_CERT_ALGORITHM_GOST_R3411_WITH_R3410_2001id-GostR3411-94-with-GostR3410-2001
SB_CERT_ALGORITHM_SHA1_ECDSA_PLAINecdsa-plain-SHA1
SB_CERT_ALGORITHM_SHA224_ECDSA_PLAINecdsa-plain-SHA224
SB_CERT_ALGORITHM_SHA256_ECDSA_PLAINecdsa-plain-SHA256
SB_CERT_ALGORITHM_SHA384_ECDSA_PLAINecdsa-plain-SHA384
SB_CERT_ALGORITHM_SHA512_ECDSA_PLAINecdsa-plain-SHA512
SB_CERT_ALGORITHM_RIPEMD160_ECDSA_PLAINecdsa-plain-RIPEMD160
SB_CERT_ALGORITHM_WHIRLPOOL_RSA_ENCRYPTIONwhirlpoolWithRSAEncryption
SB_CERT_ALGORITHM_ID_DSA_SHA224id-dsa-with-sha224
SB_CERT_ALGORITHM_ID_DSA_SHA256id-dsa-with-sha256
SB_CERT_ALGORITHM_SHA3_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSAid-ecdsa-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSAid-ecdsa-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSAid-ecdsa-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSAid-ecdsa-with-sha3-512
SB_CERT_ALGORITHM_SHA3_224_ECDSA_PLAINid-ecdsa-plain-with-sha3-224
SB_CERT_ALGORITHM_SHA3_256_ECDSA_PLAINid-ecdsa-plain-with-sha3-256
SB_CERT_ALGORITHM_SHA3_384_ECDSA_PLAINid-ecdsa-plain-with-sha3-384
SB_CERT_ALGORITHM_SHA3_512_ECDSA_PLAINid-ecdsa-plain-with-sha3-512
SB_CERT_ALGORITHM_ID_DSA_SHA3_224id-dsa-with-sha3-224
SB_CERT_ALGORITHM_ID_DSA_SHA3_256id-dsa-with-sha3-256
SB_CERT_ALGORITHM_BLAKE2S_128_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_RSA_ENCRYPTIONid-rsassa-pkcs1-v1_5-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSAid-ecdsa-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSAid-ecdsa-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSAid-ecdsa-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSAid-ecdsa-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSAid-ecdsa-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSAid-ecdsa-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSAid-ecdsa-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSAid-ecdsa-with-blake2b512
SB_CERT_ALGORITHM_BLAKE2S_128_ECDSA_PLAINid-ecdsa-plain-with-blake2s128
SB_CERT_ALGORITHM_BLAKE2S_160_ECDSA_PLAINid-ecdsa-plain-with-blake2s160
SB_CERT_ALGORITHM_BLAKE2S_224_ECDSA_PLAINid-ecdsa-plain-with-blake2s224
SB_CERT_ALGORITHM_BLAKE2S_256_ECDSA_PLAINid-ecdsa-plain-with-blake2s256
SB_CERT_ALGORITHM_BLAKE2B_160_ECDSA_PLAINid-ecdsa-plain-with-blake2b160
SB_CERT_ALGORITHM_BLAKE2B_256_ECDSA_PLAINid-ecdsa-plain-with-blake2b256
SB_CERT_ALGORITHM_BLAKE2B_384_ECDSA_PLAINid-ecdsa-plain-with-blake2b384
SB_CERT_ALGORITHM_BLAKE2B_512_ECDSA_PLAINid-ecdsa-plain-with-blake2b512
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_224id-dsa-with-blake2s224
SB_CERT_ALGORITHM_ID_DSA_BLAKE2S_256id-dsa-with-blake2s256
SB_CERT_ALGORITHM_EDDSA_ED25519id-Ed25519
SB_CERT_ALGORITHM_EDDSA_ED448id-Ed448
SB_CERT_ALGORITHM_EDDSA_ED25519_PHid-Ed25519ph
SB_CERT_ALGORITHM_EDDSA_ED448_PHid-Ed448ph
SB_CERT_ALGORITHM_EDDSAid-EdDSA
SB_CERT_ALGORITHM_EDDSA_SIGNATUREid-EdDSA-sig

Use the pinned_client_cert_key_bits, pinned_client_cert_curve, and pinned_client_cert_public_key_bytes properties to get more details about the key the certificate contains.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_bits Property

Returns the length of the public key in bits.

Syntax

def get_pinned_client_cert_key_bits(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Returns the length of the public key in bits.

This value indicates the length of the principal cryptographic parameter of the key, such as the length of the RSA modulus or ECDSA field. The key data returned by the pinned_client_cert_public_key_bytes or pinned_client_cert_private_key_bytes property would typically contain auxiliary values, and therefore be longer.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_fingerprint Property

Returns a SHA1 fingerprint of the public key contained in the certificate.

Syntax

def get_pinned_client_cert_key_fingerprint(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Returns a SHA1 fingerprint of the public key contained in the certificate.

Note that the key fingerprint is different from the certificate fingerprint accessible via the pinned_client_cert_fingerprint property. The key fingeprint uniquely identifies the public key, and so can be the same for multiple certificates containing the same key.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_key_usage Property

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

Syntax

def get_pinned_client_cert_key_usage(pinned_client_cert_index: int) -> int: ...

Default Value

0

Remarks

Indicates the purposes of the key contained in the certificate, in the form of an OR'ed flag set.

This value is a bit mask of the following values:

ckuUnknown0x00000Unknown key usage

ckuDigitalSignature0x00001Digital signature

ckuNonRepudiation0x00002Non-repudiation

ckuKeyEncipherment0x00004Key encipherment

ckuDataEncipherment0x00008Data encipherment

ckuKeyAgreement0x00010Key agreement

ckuKeyCertSign0x00020Certificate signing

ckuCRLSign0x00040Revocation signing

ckuEncipherOnly0x00080Encipher only

ckuDecipherOnly0x00100Decipher only

ckuServerAuthentication0x00200Server authentication

ckuClientAuthentication0x00400Client authentication

ckuCodeSigning0x00800Code signing

ckuEmailProtection0x01000Email protection

ckuTimeStamping0x02000Timestamping

ckuOCSPSigning0x04000OCSP signing

ckuSmartCardLogon0x08000Smartcard logon

ckuKeyPurposeClientAuth0x10000Kerberos - client authentication

ckuKeyPurposeKDC0x20000Kerberos - KDC

Set this property before generating the certificate to propagate the key usage flags to the new certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_public_key_bytes Property

Contains the certificate's public key in DER format.

Syntax

def get_pinned_client_cert_public_key_bytes(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains the certificate's public key in DER format.

This typically would contain an ASN.1-encoded public key value. The exact format depends on the type of the public key contained in the certificate.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_self_signed Property

Indicates whether the certificate is self-signed (root) or signed by an external CA.

Syntax

def get_pinned_client_cert_self_signed(pinned_client_cert_index: int) -> bool: ...

Default Value

FALSE

Remarks

Indicates whether the certificate is self-signed (root) or signed by an external CA.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_serial_number Property

Returns the certificate's serial number.

Syntax

def get_pinned_client_cert_serial_number(pinned_client_cert_index: int) -> bytes: ...

Remarks

Returns the certificate's serial number.

The serial number is a binary string that uniquely identifies a certificate among others issued by the same CA. According to the X.509 standard, the (issuer, serial number) pair should be globally unique to facilitate chain building.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_sig_algorithm Property

Indicates the algorithm that was used by the CA to sign this certificate.

Syntax

def get_pinned_client_cert_sig_algorithm(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

Indicates the algorithm that was used by the CA to sign this certificate.

A signature algorithm typically combines hash and public key algorithms together, such as sha256WithRSAEncryption or ecdsa-with-SHA256.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject Property

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name.

Syntax

def get_pinned_client_cert_subject(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The common name of the certificate holder, typically an individual's name, a URL, an e-mail address, or a company name. This is part of a larger set of credentials available via pinned_client_cert_subject_rdn.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_key_id Property

Contains a unique identifier of the certificate's cryptographic key.

Syntax

def get_pinned_client_cert_subject_key_id(pinned_client_cert_index: int) -> bytes: ...

Remarks

Contains a unique identifier of the certificate's cryptographic key.

Subject Key Identifier is a certificate extension which allows a specific public key to be associated with a certificate holder. Typically, subject key identifiers of CA certificates are recorded as respective CA key identifiers in the subordinate certificates that they issue, which facilitates chain building.

The pinned_client_cert_subject_key_id and pinned_client_cert_ca_key_id properties of self-signed certificates typically contain identical values, as in that specific case, the issuer and the subject are the same entity.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_subject_rdn Property

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Syntax

def get_pinned_client_cert_subject_rdn(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

A list of Property=Value pairs that uniquely identify the certificate holder (subject).

Depending on the purpose of the certificate and the policies of the CA that issued it, the values included in the subject record may differ drastically and contain business or personal names, web URLs, email addresses, and other data.

Example: /C=US/O=Oranges and Apples, Inc./OU=Accounts Receivable/1.2.3.4.5=Value with unknown OID/CN=Margaret Watkins.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_from Property

The time point at which the certificate becomes valid, in UTC.

Syntax

def get_pinned_client_cert_valid_from(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate becomes valid, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

pinned_client_cert_valid_to Property

The time point at which the certificate expires, in UTC.

Syntax

def get_pinned_client_cert_valid_to(pinned_client_cert_index: int) -> str: ...

Default Value

""

Remarks

The time point at which the certificate expires, in UTC.

The pinned_client_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the pinned_client_cert_count property.

This property is read-only.

port Property

The port number to listen for incoming connections on.

Syntax

def get_port() -> int: ...
def set_port(value: int) -> None: ...

port = property(get_port, set_port)

Default Value

21

Remarks

Use this property to specify the port number to listen for incoming connections on.

read_only Property

Makes the server's file system read-only for all users.

Syntax

def get_read_only() -> bool: ...
def set_read_only(value: bool) -> None: ...

read_only = property(get_read_only, set_read_only)

Default Value

FALSE

Remarks

Set this property to true to present the server's file system as read-only for all connecting users.

root_directory Property

Specifies the server's root directory.

Syntax

def get_root_directory() -> str: ...
def set_root_directory(value: str) -> None: ...

root_directory = property(get_root_directory, set_root_directory)

Default Value

""

Remarks

Use this property to specify the shared root directory for all client sessions.

security_options Property

Various options of the secure connection.

Syntax

def get_security_options() -> int: ...
def set_security_options(value: int) -> None: ...

security_options = property(get_security_options, set_security_options)

Default Value

63

Remarks

Various options of the secure connection:

cfsoPlainLogin1Allow logins over insecure connections

cfsoEncryption2Enable encryption

cfsoAuth4Enable AUTH command (explicit TLS)

cfsoClearControlChannel8Allow clear control channel mode

cfsoClearDataChannel16Allow clear data channel TLS connections

cfsoEncryptedDataChannel32Allow encrypted data channel TLS connections

session_timeout Property

Specifies the session timeout in milliseconds.

Syntax

def get_session_timeout() -> int: ...
def set_session_timeout(value: int) -> None: ...

session_timeout = property(get_session_timeout, set_session_timeout)

Default Value

360000

Remarks

Specifies the maximum inactivity time (in milliseconds) after which the session will be forcebly closed.

socket_incoming_speed_limit Property

The maximum number of bytes to read from the socket, per second.

Syntax

def get_socket_incoming_speed_limit() -> int: ...
def set_socket_incoming_speed_limit(value: int) -> None: ...

socket_incoming_speed_limit = property(get_socket_incoming_speed_limit, set_socket_incoming_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to read from the socket, per second.

socket_local_address Property

The local network interface to bind the socket to.

Syntax

def get_socket_local_address() -> str: ...
def set_socket_local_address(value: str) -> None: ...

socket_local_address = property(get_socket_local_address, set_socket_local_address)

Default Value

""

Remarks

The local network interface to bind the socket to.

socket_local_port Property

The local port number to bind the socket to.

Syntax

def get_socket_local_port() -> int: ...
def set_socket_local_port(value: int) -> None: ...

socket_local_port = property(get_socket_local_port, set_socket_local_port)

Default Value

0

Remarks

The local port number to bind the socket to.

socket_outgoing_speed_limit Property

The maximum number of bytes to write to the socket, per second.

Syntax

def get_socket_outgoing_speed_limit() -> int: ...
def set_socket_outgoing_speed_limit(value: int) -> None: ...

socket_outgoing_speed_limit = property(get_socket_outgoing_speed_limit, set_socket_outgoing_speed_limit)

Default Value

0

Remarks

The maximum number of bytes to write to the socket, per second.

socket_timeout Property

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

Syntax

def get_socket_timeout() -> int: ...
def set_socket_timeout(value: int) -> None: ...

socket_timeout = property(get_socket_timeout, set_socket_timeout)

Default Value

60000

Remarks

The maximum period of waiting, in milliseconds, after which the socket operation is considered unsuccessful.

If Timeout is set to 0, a socket operation will expire after the system-default timeout (2 hrs 8 min for TCP stack).

socket_use_ipv6 Property

Enables or disables IP protocol version 6.

Syntax

def get_socket_use_ipv6() -> bool: ...
def set_socket_use_ipv6(value: bool) -> None: ...

socket_use_ipv6 = property(get_socket_use_ipv6, set_socket_use_ipv6)

Default Value

FALSE

Remarks

Enables or disables IP protocol version 6.

tls_server_cert_count Property

The number of records in the TLSServerCert arrays.

Syntax

def get_tls_server_cert_count() -> int: ...
def set_tls_server_cert_count(value: int) -> None: ...

tls_server_cert_count = property(get_tls_server_cert_count, set_tls_server_cert_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at tls_server_cert_count - 1.

tls_server_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_tls_server_cert_bytes(tls_server_cert_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The tls_server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the tls_server_cert_count property.

This property is read-only.

tls_server_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_tls_server_cert_handle(tls_server_cert_index: int) -> int: ...
def set_tls_server_cert_handle(tls_server_cert_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The tls_server_cert_index parameter specifies the index of the item in the array. The size of the array is controlled by the tls_server_cert_count property.

tls_auto_validate_certificates Property

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

Syntax

def get_tls_auto_validate_certificates() -> bool: ...
def set_tls_auto_validate_certificates(value: bool) -> None: ...

tls_auto_validate_certificates = property(get_tls_auto_validate_certificates, set_tls_auto_validate_certificates)

Default Value

TRUE

Remarks

Specifies whether server-side TLS certificates should be validated automatically using internal validation rules.

tls_base_configuration Property

Selects the base configuration for the TLS settings.

Syntax

def get_tls_base_configuration() -> int: ...
def set_tls_base_configuration(value: int) -> None: ...

tls_base_configuration = property(get_tls_base_configuration, set_tls_base_configuration)

Default Value

0

Remarks

Selects the base configuration for the TLS settings. Several profiles are offered and tuned up for different purposes, such as high security or higher compatibility.

stpcDefault0
stpcCompatible1
stpcComprehensiveInsecure2
stpcHighlySecure3

tls_ciphersuites Property

A list of ciphersuites separated with commas or semicolons.

Syntax

def get_tls_ciphersuites() -> str: ...
def set_tls_ciphersuites(value: str) -> None: ...

tls_ciphersuites = property(get_tls_ciphersuites, set_tls_ciphersuites)

Default Value

""

Remarks

A list of ciphersuites separated with commas or semicolons. Each ciphersuite in the list may be prefixed with a minus sign (-) to indicate that the ciphersuite should be disabled rather than enabled. Besides the specific ciphersuite modifiers, this property supports the all (and -all) aliases, allowing all ciphersuites to be blanketly enabled or disabled at once.

Note: the list of ciphersuites provided to this property alters the baseline list of ciphersuites as defined by tls_base_configuration. Remember to start your ciphersuite string with -all; if you need to only enable a specific fixed set of ciphersuites. The list of supported ciphersuites is provided below:

  • NULL_NULL_NULL
  • RSA_NULL_MD5
  • RSA_NULL_SHA
  • RSA_RC4_MD5
  • RSA_RC4_SHA
  • RSA_RC2_MD5
  • RSA_IDEA_MD5
  • RSA_IDEA_SHA
  • RSA_DES_MD5
  • RSA_DES_SHA
  • RSA_3DES_MD5
  • RSA_3DES_SHA
  • RSA_AES128_SHA
  • RSA_AES256_SHA
  • DH_DSS_DES_SHA
  • DH_DSS_3DES_SHA
  • DH_DSS_AES128_SHA
  • DH_DSS_AES256_SHA
  • DH_RSA_DES_SHA
  • DH_RSA_3DES_SHA
  • DH_RSA_AES128_SHA
  • DH_RSA_AES256_SHA
  • DHE_DSS_DES_SHA
  • DHE_DSS_3DES_SHA
  • DHE_DSS_AES128_SHA
  • DHE_DSS_AES256_SHA
  • DHE_RSA_DES_SHA
  • DHE_RSA_3DES_SHA
  • DHE_RSA_AES128_SHA
  • DHE_RSA_AES256_SHA
  • DH_ANON_RC4_MD5
  • DH_ANON_DES_SHA
  • DH_ANON_3DES_SHA
  • DH_ANON_AES128_SHA
  • DH_ANON_AES256_SHA
  • RSA_RC2_MD5_EXPORT
  • RSA_RC4_MD5_EXPORT
  • RSA_DES_SHA_EXPORT
  • DH_DSS_DES_SHA_EXPORT
  • DH_RSA_DES_SHA_EXPORT
  • DHE_DSS_DES_SHA_EXPORT
  • DHE_RSA_DES_SHA_EXPORT
  • DH_ANON_RC4_MD5_EXPORT
  • DH_ANON_DES_SHA_EXPORT
  • RSA_CAMELLIA128_SHA
  • DH_DSS_CAMELLIA128_SHA
  • DH_RSA_CAMELLIA128_SHA
  • DHE_DSS_CAMELLIA128_SHA
  • DHE_RSA_CAMELLIA128_SHA
  • DH_ANON_CAMELLIA128_SHA
  • RSA_CAMELLIA256_SHA
  • DH_DSS_CAMELLIA256_SHA
  • DH_RSA_CAMELLIA256_SHA
  • DHE_DSS_CAMELLIA256_SHA
  • DHE_RSA_CAMELLIA256_SHA
  • DH_ANON_CAMELLIA256_SHA
  • PSK_RC4_SHA
  • PSK_3DES_SHA
  • PSK_AES128_SHA
  • PSK_AES256_SHA
  • DHE_PSK_RC4_SHA
  • DHE_PSK_3DES_SHA
  • DHE_PSK_AES128_SHA
  • DHE_PSK_AES256_SHA
  • RSA_PSK_RC4_SHA
  • RSA_PSK_3DES_SHA
  • RSA_PSK_AES128_SHA
  • RSA_PSK_AES256_SHA
  • RSA_SEED_SHA
  • DH_DSS_SEED_SHA
  • DH_RSA_SEED_SHA
  • DHE_DSS_SEED_SHA
  • DHE_RSA_SEED_SHA
  • DH_ANON_SEED_SHA
  • SRP_SHA_3DES_SHA
  • SRP_SHA_RSA_3DES_SHA
  • SRP_SHA_DSS_3DES_SHA
  • SRP_SHA_AES128_SHA
  • SRP_SHA_RSA_AES128_SHA
  • SRP_SHA_DSS_AES128_SHA
  • SRP_SHA_AES256_SHA
  • SRP_SHA_RSA_AES256_SHA
  • SRP_SHA_DSS_AES256_SHA
  • ECDH_ECDSA_NULL_SHA
  • ECDH_ECDSA_RC4_SHA
  • ECDH_ECDSA_3DES_SHA
  • ECDH_ECDSA_AES128_SHA
  • ECDH_ECDSA_AES256_SHA
  • ECDHE_ECDSA_NULL_SHA
  • ECDHE_ECDSA_RC4_SHA
  • ECDHE_ECDSA_3DES_SHA
  • ECDHE_ECDSA_AES128_SHA
  • ECDHE_ECDSA_AES256_SHA
  • ECDH_RSA_NULL_SHA
  • ECDH_RSA_RC4_SHA
  • ECDH_RSA_3DES_SHA
  • ECDH_RSA_AES128_SHA
  • ECDH_RSA_AES256_SHA
  • ECDHE_RSA_NULL_SHA
  • ECDHE_RSA_RC4_SHA
  • ECDHE_RSA_3DES_SHA
  • ECDHE_RSA_AES128_SHA
  • ECDHE_RSA_AES256_SHA
  • ECDH_ANON_NULL_SHA
  • ECDH_ANON_RC4_SHA
  • ECDH_ANON_3DES_SHA
  • ECDH_ANON_AES128_SHA
  • ECDH_ANON_AES256_SHA
  • RSA_NULL_SHA256
  • RSA_AES128_SHA256
  • RSA_AES256_SHA256
  • DH_DSS_AES128_SHA256
  • DH_RSA_AES128_SHA256
  • DHE_DSS_AES128_SHA256
  • DHE_RSA_AES128_SHA256
  • DH_DSS_AES256_SHA256
  • DH_RSA_AES256_SHA256
  • DHE_DSS_AES256_SHA256
  • DHE_RSA_AES256_SHA256
  • DH_ANON_AES128_SHA256
  • DH_ANON_AES256_SHA256
  • RSA_AES128_GCM_SHA256
  • RSA_AES256_GCM_SHA384
  • DHE_RSA_AES128_GCM_SHA256
  • DHE_RSA_AES256_GCM_SHA384
  • DH_RSA_AES128_GCM_SHA256
  • DH_RSA_AES256_GCM_SHA384
  • DHE_DSS_AES128_GCM_SHA256
  • DHE_DSS_AES256_GCM_SHA384
  • DH_DSS_AES128_GCM_SHA256
  • DH_DSS_AES256_GCM_SHA384
  • DH_ANON_AES128_GCM_SHA256
  • DH_ANON_AES256_GCM_SHA384
  • ECDHE_ECDSA_AES128_SHA256
  • ECDHE_ECDSA_AES256_SHA384
  • ECDH_ECDSA_AES128_SHA256
  • ECDH_ECDSA_AES256_SHA384
  • ECDHE_RSA_AES128_SHA256
  • ECDHE_RSA_AES256_SHA384
  • ECDH_RSA_AES128_SHA256
  • ECDH_RSA_AES256_SHA384
  • ECDHE_ECDSA_AES128_GCM_SHA256
  • ECDHE_ECDSA_AES256_GCM_SHA384
  • ECDH_ECDSA_AES128_GCM_SHA256
  • ECDH_ECDSA_AES256_GCM_SHA384
  • ECDHE_RSA_AES128_GCM_SHA256
  • ECDHE_RSA_AES256_GCM_SHA384
  • ECDH_RSA_AES128_GCM_SHA256
  • ECDH_RSA_AES256_GCM_SHA384
  • PSK_AES128_GCM_SHA256
  • PSK_AES256_GCM_SHA384
  • DHE_PSK_AES128_GCM_SHA256
  • DHE_PSK_AES256_GCM_SHA384
  • RSA_PSK_AES128_GCM_SHA256
  • RSA_PSK_AES256_GCM_SHA384
  • PSK_AES128_SHA256
  • PSK_AES256_SHA384
  • PSK_NULL_SHA256
  • PSK_NULL_SHA384
  • DHE_PSK_AES128_SHA256
  • DHE_PSK_AES256_SHA384
  • DHE_PSK_NULL_SHA256
  • DHE_PSK_NULL_SHA384
  • RSA_PSK_AES128_SHA256
  • RSA_PSK_AES256_SHA384
  • RSA_PSK_NULL_SHA256
  • RSA_PSK_NULL_SHA384
  • RSA_CAMELLIA128_SHA256
  • DH_DSS_CAMELLIA128_SHA256
  • DH_RSA_CAMELLIA128_SHA256
  • DHE_DSS_CAMELLIA128_SHA256
  • DHE_RSA_CAMELLIA128_SHA256
  • DH_ANON_CAMELLIA128_SHA256
  • RSA_CAMELLIA256_SHA256
  • DH_DSS_CAMELLIA256_SHA256
  • DH_RSA_CAMELLIA256_SHA256
  • DHE_DSS_CAMELLIA256_SHA256
  • DHE_RSA_CAMELLIA256_SHA256
  • DH_ANON_CAMELLIA256_SHA256
  • ECDHE_ECDSA_CAMELLIA128_SHA256
  • ECDHE_ECDSA_CAMELLIA256_SHA384
  • ECDH_ECDSA_CAMELLIA128_SHA256
  • ECDH_ECDSA_CAMELLIA256_SHA384
  • ECDHE_RSA_CAMELLIA128_SHA256
  • ECDHE_RSA_CAMELLIA256_SHA384
  • ECDH_RSA_CAMELLIA128_SHA256
  • ECDH_RSA_CAMELLIA256_SHA384
  • RSA_CAMELLIA128_GCM_SHA256
  • RSA_CAMELLIA256_GCM_SHA384
  • DHE_RSA_CAMELLIA128_GCM_SHA256
  • DHE_RSA_CAMELLIA256_GCM_SHA384
  • DH_RSA_CAMELLIA128_GCM_SHA256
  • DH_RSA_CAMELLIA256_GCM_SHA384
  • DHE_DSS_CAMELLIA128_GCM_SHA256
  • DHE_DSS_CAMELLIA256_GCM_SHA384
  • DH_DSS_CAMELLIA128_GCM_SHA256
  • DH_DSS_CAMELLIA256_GCM_SHA384
  • DH_anon_CAMELLIA128_GCM_SHA256
  • DH_anon_CAMELLIA256_GCM_SHA384
  • ECDHE_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDHE_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDH_ECDSA_CAMELLIA128_GCM_SHA256
  • ECDH_ECDSA_CAMELLIA256_GCM_SHA384
  • ECDHE_RSA_CAMELLIA128_GCM_SHA256
  • ECDHE_RSA_CAMELLIA256_GCM_SHA384
  • ECDH_RSA_CAMELLIA128_GCM_SHA256
  • ECDH_RSA_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_GCM_SHA256
  • PSK_CAMELLIA256_GCM_SHA384
  • DHE_PSK_CAMELLIA128_GCM_SHA256
  • DHE_PSK_CAMELLIA256_GCM_SHA384
  • RSA_PSK_CAMELLIA128_GCM_SHA256
  • RSA_PSK_CAMELLIA256_GCM_SHA384
  • PSK_CAMELLIA128_SHA256
  • PSK_CAMELLIA256_SHA384
  • DHE_PSK_CAMELLIA128_SHA256
  • DHE_PSK_CAMELLIA256_SHA384
  • RSA_PSK_CAMELLIA128_SHA256
  • RSA_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_CAMELLIA128_SHA256
  • ECDHE_PSK_CAMELLIA256_SHA384
  • ECDHE_PSK_RC4_SHA
  • ECDHE_PSK_3DES_SHA
  • ECDHE_PSK_AES128_SHA
  • ECDHE_PSK_AES256_SHA
  • ECDHE_PSK_AES128_SHA256
  • ECDHE_PSK_AES256_SHA384
  • ECDHE_PSK_NULL_SHA
  • ECDHE_PSK_NULL_SHA256
  • ECDHE_PSK_NULL_SHA384
  • ECDHE_RSA_CHACHA20_POLY1305_SHA256
  • ECDHE_ECDSA_CHACHA20_POLY1305_SHA256
  • DHE_RSA_CHACHA20_POLY1305_SHA256
  • PSK_CHACHA20_POLY1305_SHA256
  • ECDHE_PSK_CHACHA20_POLY1305_SHA256
  • DHE_PSK_CHACHA20_POLY1305_SHA256
  • RSA_PSK_CHACHA20_POLY1305_SHA256
  • AES128_GCM_SHA256
  • AES256_GCM_SHA384
  • CHACHA20_POLY1305_SHA256
  • AES128_CCM_SHA256
  • AES128_CCM8_SHA256

tls_client_auth Property

Enables or disables certificate-based client authentication.

Syntax

def get_tls_client_auth() -> int: ...
def set_tls_client_auth(value: int) -> None: ...

tls_client_auth = property(get_tls_client_auth, set_tls_client_auth)

Default Value

0

Remarks

Enables or disables certificate-based client authentication.

Set this property to true to tune up the client authentication type:

ccatNoAuth0
ccatRequestCert1
ccatRequireCert2

tls_ec_curves Property

Defines the elliptic curves to enable.

Syntax

def get_tls_ec_curves() -> str: ...
def set_tls_ec_curves(value: str) -> None: ...

tls_ec_curves = property(get_tls_ec_curves, set_tls_ec_curves)

Default Value

""

Remarks

Defines the elliptic curves to enable.

tls_extensions Property

Provides access to TLS extensions.

Syntax

def get_tls_extensions() -> str: ...
def set_tls_extensions(value: str) -> None: ...

tls_extensions = property(get_tls_extensions, set_tls_extensions)

Default Value

""

Remarks

Provides access to TLS extensions.

tls_force_resume_if_destination_changes Property

Whether to force TLS session resumption when the destination address changes.

Syntax

def get_tls_force_resume_if_destination_changes() -> bool: ...
def set_tls_force_resume_if_destination_changes(value: bool) -> None: ...

tls_force_resume_if_destination_changes = property(get_tls_force_resume_if_destination_changes, set_tls_force_resume_if_destination_changes)

Default Value

FALSE

Remarks

Whether to force TLS session resumption when the destination address changes.

tls_pre_shared_identity Property

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

Syntax

def get_tls_pre_shared_identity() -> str: ...
def set_tls_pre_shared_identity(value: str) -> None: ...

tls_pre_shared_identity = property(get_tls_pre_shared_identity, set_tls_pre_shared_identity)

Default Value

""

Remarks

Defines the identity used when the PSK (Pre-Shared Key) key-exchange mechanism is negotiated.

tls_pre_shared_key Property

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

Syntax

def get_tls_pre_shared_key() -> str: ...
def set_tls_pre_shared_key(value: str) -> None: ...

tls_pre_shared_key = property(get_tls_pre_shared_key, set_tls_pre_shared_key)

Default Value

""

Remarks

Contains the pre-shared key for the PSK (Pre-Shared Key) key-exchange mechanism, encoded with base16.

tls_pre_shared_key_ciphersuite Property

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

Syntax

def get_tls_pre_shared_key_ciphersuite() -> str: ...
def set_tls_pre_shared_key_ciphersuite(value: str) -> None: ...

tls_pre_shared_key_ciphersuite = property(get_tls_pre_shared_key_ciphersuite, set_tls_pre_shared_key_ciphersuite)

Default Value

""

Remarks

Defines the ciphersuite used for PSK (Pre-Shared Key) negotiation.

tls_renegotiation_attack_prevention_mode Property

Selects the renegotiation attack prevention mechanism.

Syntax

def get_tls_renegotiation_attack_prevention_mode() -> int: ...
def set_tls_renegotiation_attack_prevention_mode(value: int) -> None: ...

tls_renegotiation_attack_prevention_mode = property(get_tls_renegotiation_attack_prevention_mode, set_tls_renegotiation_attack_prevention_mode)

Default Value

2

Remarks

Selects the renegotiation attack prevention mechanism.

The following options are available:

crapmCompatible0TLS 1.0 and 1.1 compatibility mode (renegotiation indication extension is disabled).
crapmStrict1Renegotiation attack prevention is enabled and enforced.
crapmAuto2Automatically choose whether to enable or disable renegotiation attack prevention.

tls_revocation_check Property

Specifies the kind(s) of revocation check to perform.

Syntax

def get_tls_revocation_check() -> int: ...
def set_tls_revocation_check(value: int) -> None: ...

tls_revocation_check = property(get_tls_revocation_check, set_tls_revocation_check)

Default Value

1

Remarks

Specifies the kind(s) of revocation check to perform.

Revocation checking is necessary to ensure the integrity of the chain and obtain up-to-date certificate validity and trustworthiness information.

crcNone0No revocation checking.
crcAuto1Automatic mode selection. Currently this maps to crcAnyOCSPOrCRL, but it may change in the future.
crcAllCRL2All provided CRL endpoints will be checked, and all checks must succeed.
crcAllOCSP3All provided OCSP endpoints will be checked, and all checks must succeed.
crcAllCRLAndOCSP4All provided CRL and OCSP endpoints will be checked, and all checks must succeed.
crcAnyCRL5All provided CRL endpoints will be checked, and at least one check must succeed.
crcAnyOCSP6All provided OCSP endpoints will be checked, and at least one check must succeed.
crcAnyCRLOrOCSP7All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. CRL endpoints are checked first.
crcAnyOCSPOrCRL8All provided CRL and OCSP endpoints will be checked, and at least one check must succeed. OCSP endpoints are checked first.

This setting controls the way the revocation checks are performed for every certificate in the chain. Typically certificates come with two types of revocation information sources: CRL (certificate revocation lists) and OCSP responders. CRLs are static objects periodically published by the CA at some online location. OCSP responders are active online services maintained by the CA that can provide up-to-date information on certificate statuses in near real time.

There are some conceptual differences between the two. CRLs are normally larger in size. Their use involves some latency because there is normally some delay between the time when a certificate was revoked and the time the subsequent CRL mentioning that is published. The benefits of CRL is that the same object can provide statuses for all certificates issued by a particular CA, and that the whole technology is much simpler than OCSP (and thus is supported by more CAs).

This setting lets you adjust the validation course by including or excluding certain types of revocation sources from the validation process. The crcAnyOCSPOrCRL setting (give preference to the faster OCSP route and only demand one source to succeed) is a good choice for most typical validation environments. The "crcAll*" modes are much stricter, and may be used in scenarios where bulletproof validity information is essential.

Note: If no CRL or OCSP endpoints are provided by the CA, the revocation check will be considered successful. This is because the CA chose not to supply revocation information for its certificates, meaning they are considered irrevocable.

Note: Within each of the above settings, if any retrieved CRL or OCSP response indicates that the certificate has been revoked, the revocation check fails.

tls_ssl_options Property

Various SSL (TLS) protocol options, set of cssloExpectShutdownMessage 0x001 Wait for the close-notify message when shutting down the connection cssloOpenSSLDTLSWorkaround 0x002 (DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions cssloDisableKexLengthAlignment 0x004 Do not align the client-side PMS by the RSA modulus size.

Syntax

def get_tls_ssl_options() -> int: ...
def set_tls_ssl_options(value: int) -> None: ...

tls_ssl_options = property(get_tls_ssl_options, set_tls_ssl_options)

Default Value

16

Remarks

Various SSL (TLS) protocol options, set of

cssloExpectShutdownMessage0x001Wait for the close-notify message when shutting down the connection

cssloOpenSSLDTLSWorkaround0x002(DEPRECATED) Use a DTLS version workaround when talking to very old OpenSSL versions

cssloDisableKexLengthAlignment0x004Do not align the client-side PMS by the RSA modulus size. It is unlikely that you will ever need to adjust it.

cssloForceUseOfClientCertHashAlg0x008Enforce the use of the client certificate hash algorithm. It is unlikely that you will ever need to adjust it.

cssloAutoAddServerNameExtension0x010Automatically add the server name extension when known

cssloAcceptTrustedSRPPrimesOnly0x020Accept trusted SRP primes only

cssloDisableSignatureAlgorithmsExtension0x040Disable (do not send) the signature algorithms extension. It is unlikely that you will ever need to adjust it.

cssloIntolerateHigherProtocolVersions0x080(server option) Do not allow fallback from TLS versions higher than currently enabled

cssloStickToPrefCertHashAlg0x100Stick to preferred certificate hash algorithms

cssloNoImplicitTLS12Fallback0x200Disable implicit TLS 1.3 to 1.2 fallbacks

cssloUseHandshakeBatches0x400Send the handshake message as large batches rather than individually

tls_tls_mode Property

Specifies the TLS mode to use.

Syntax

def get_tls_tls_mode() -> int: ...
def set_tls_tls_mode(value: int) -> None: ...

tls_tls_mode = property(get_tls_tls_mode, set_tls_tls_mode)

Default Value

0

Remarks

Specifies the TLS mode to use.

smDefault0
smNoTLS1Do not use TLS
smExplicitTLS2Connect to the server without any encryption and then request an SSL session.
smImplicitTLS3Connect to the specified port, and establish the SSL session at once.
smMixedTLS4Connect to the specified port, and establish the SSL session at once, but allow plain data.

tls_use_extended_master_secret Property

Enables the Extended Master Secret Extension, as defined in RFC 7627.

Syntax

def get_tls_use_extended_master_secret() -> bool: ...
def set_tls_use_extended_master_secret(value: bool) -> None: ...

tls_use_extended_master_secret = property(get_tls_use_extended_master_secret, set_tls_use_extended_master_secret)

Default Value

FALSE

Remarks

Enables the Extended Master Secret Extension, as defined in RFC 7627.

tls_use_session_resumption Property

Enables or disables the TLS session resumption capability.

Syntax

def get_tls_use_session_resumption() -> bool: ...
def set_tls_use_session_resumption(value: bool) -> None: ...

tls_use_session_resumption = property(get_tls_use_session_resumption, set_tls_use_session_resumption)

Default Value

FALSE

Remarks

Enables or disables the TLS session resumption capability.

tls_versions Property

The SSL/TLS versions to enable by default.

Syntax

def get_tls_versions() -> int: ...
def set_tls_versions(value: int) -> None: ...

tls_versions = property(get_tls_versions, set_tls_versions)

Default Value

16

Remarks

The SSL/TLS versions to enable by default.

csbSSL20x01SSL 2

csbSSL30x02SSL 3

csbTLS10x04TLS 1.0

csbTLS110x08TLS 1.1

csbTLS120x10TLS 1.2

csbTLS130x20TLS 1.3

user_count Property

The number of records in the User arrays.

Syntax

def get_user_count() -> int: ...
def set_user_count(value: int) -> None: ...

user_count = property(get_user_count, set_user_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

The array indices start at 0 and end at user_count - 1.

user_associated_data Property

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

Syntax

def get_user_associated_data(user_index: int) -> bytes: ...
def set_user_associated_data(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's Associated Data when SSH AEAD (Authenticated Encryption with Associated Data) algorithm is used.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_base_path Property

Base path for this user in the server's file system.

Syntax

def get_user_base_path(user_index: int) -> str: ...
def set_user_base_path(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Base path for this user in the server's file system.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_data Property

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

Syntax

def get_user_data(user_index: int) -> str: ...
def set_user_data(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Contains uninterpreted user-defined data that should be associated with the user account, such as comments or custom settings.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_user_handle(user_index: int) -> int: ...
def set_user_handle(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_hash_algorithm Property

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user.

Syntax

def get_user_hash_algorithm(user_index: int) -> str: ...
def set_user_hash_algorithm(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

Specifies the hash algorithm used to generate TOTP (Time-based One-Time Passwords) passwords for this user. Three HMAC algorithms are supported, with SHA-1, SHA-256, and SHA-512 digests:

SB_MAC_ALGORITHM_HMAC_SHA1SHA1
SB_MAC_ALGORITHM_HMAC_SHA256SHA256
SB_MAC_ALGORITHM_HMAC_SHA512SHA512

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_incoming_speed_limit Property

Specifies the incoming speed limit for this user.

Syntax

def get_user_incoming_speed_limit(user_index: int) -> int: ...
def set_user_incoming_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the incoming speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_outgoing_speed_limit Property

Specifies the outgoing speed limit for this user.

Syntax

def get_user_outgoing_speed_limit(user_index: int) -> int: ...
def set_user_outgoing_speed_limit(user_index: int, value: int) -> None: ...

Default Value

0

Remarks

Specifies the outgoing speed limit for this user. The value of 0 (zero) means "no limitation".

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_password Property

The user's authentication password.

Syntax

def get_user_password(user_index: int) -> str: ...
def set_user_password(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The user's authentication password.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_shared_secret Property

Contains the user's secret key, which is essentially a shared secret between the client and server.

Syntax

def get_user_shared_secret(user_index: int) -> bytes: ...
def set_user_shared_secret(user_index: int, value: bytes) -> None: ...

Remarks

Contains the user's secret key, which is essentially a shared secret between the client and server.

Shared secrets can be used in TLS-driven protocols, as well as in OTP (where it is called a 'key secret') for generating one-time passwords on one side, and validate them on the other.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

user_username Property

The registered name (login) of the user.

Syntax

def get_user_username(user_index: int) -> str: ...
def set_user_username(user_index: int, value: str) -> None: ...

Default Value

""

Remarks

The registered name (login) of the user.

The user_index parameter specifies the index of the item in the array. The size of the array is controlled by the user_count property.

use_utf8 Property

Enables or disables UTF8 file name conversions.

Syntax

def get_use_utf8() -> bool: ...
def set_use_utf8(value: bool) -> None: ...

use_utf8 = property(get_use_utf8, set_use_utf8)

Default Value

TRUE

Remarks

Use this property to enable and disable UTF8 file name conversion. The server typically adjusts to the right setting automatically, but you may use this property to enforce the needed behaviour.

cleanup Method

Cleans up the server environment by purging expired sessions and cleaning caches.

Syntax

def cleanup() -> None: ...

Remarks

Call this method while the server is active to clean up the environment allocated for the server by releasing unused resources and cleaning caches.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

drop_client Method

Terminates a client connection.

Syntax

def drop_client(connection_id: int, forced: bool) -> None: ...

Remarks

Call this method to shut down a connected client. Forced indicates whether the connection should be closed in a graceful manner.

get_client_buffer Method

Obtains a pending connection buffer.

Syntax

def get_client_buffer(connection_id: int) -> bytes: ...

Remarks

Use this method to obtain a pending connection buffer from your on_write_file event handler. The connection buffer contains data that have been received from the client but has not been written to the file yet.

list_clients Method

Enumerates the connected clients.

Syntax

def list_clients() -> str: ...

Remarks

This method enumerates the connected clients. It returns a list of strings, with each string being of 'ConnectionID|Address|Port' format, and representing a single connection.

pin_client Method

Takes a snapshot of the connection's properties.

Syntax

def pin_client(connection_id: int) -> None: ...

Remarks

Use this method to take a snapshot of a connected client. The captured properties are populated in pinned_client and pinned_client_chain properties.

reset Method

Resets the class settings.

Syntax

def reset() -> None: ...

Remarks

reset is a generic method available in every class.

set_client_buffer Method

Commits a data buffer to the connection.

Syntax

def set_client_buffer(connection_id: int, value: bytes) -> None: ...

Remarks

Use this method from your on_read_file event handler to commit a chunk of file data to the server component.

set_client_file_entry Method

Commits a file entry to the connection.

Syntax

def set_client_file_entry(connection_id: int) -> None: ...

Remarks

Use this method to commit a file details entry provided in client_file_entry property to ConnectionID connection. This method is supposed to be used from a on_find_next event handler.

Please note that events like on_find_next may be invoked concurrently for several connection threads. Please make sure you use a locking mechanism to avoid mixing up details in client_file_entry.

start Method

Starts the server.

Syntax

def start() -> None: ...

Remarks

Call this method to start listening for incoming connections on port port. Call stop to deactivate the server.

stop Method

Stops the server.

Syntax

def stop() -> None: ...

Remarks

Call this method to terminate all active sessions and stop listening for new incoming connections.

on_accept Event

Reports an incoming connection.

Syntax

class FTPServerAcceptEventParams(object):
  @property
  def remote_address() -> str: ...

  @property
  def remote_port() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class FTPServer:
@property
def on_accept() -> Callable[[FTPServerAcceptEventParams], None]: ...
@on_accept.setter
def on_accept(event_hook: Callable[[FTPServerAcceptEventParams], None]) -> None: ...

Remarks

This event is fired when a new connection from RemoteAddress:RemotePort is ready to be accepted. Use the Accept parameter to accept or decline it.

Subscribe to on_connect event to be notified of every connection that has been set up.

on_after_change_directory Event

Signals the completion of a directory change operation.

Syntax

class FTPServerAfterChangeDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_change_directory() -> Callable[[FTPServerAfterChangeDirectoryEventParams], None]: ...
@on_after_change_directory.setter
def on_after_change_directory(event_hook: Callable[[FTPServerAfterChangeDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a directory change operation. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_after_create_directory Event

Signals the completion of a directory creation operation.

Syntax

class FTPServerAfterCreateDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_create_directory() -> Callable[[FTPServerAfterCreateDirectoryEventParams], None]: ...
@on_after_create_directory.setter
def on_after_create_directory(event_hook: Callable[[FTPServerAfterCreateDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a directory creation operation. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_after_remove_directory Event

Signals the completion of a directory removal operation.

Syntax

class FTPServerAfterRemoveDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_remove_directory() -> Callable[[FTPServerAfterRemoveDirectoryEventParams], None]: ...
@on_after_remove_directory.setter
def on_after_remove_directory(event_hook: Callable[[FTPServerAfterRemoveDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a directory removal operation. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_after_remove_file Event

Signals the completion of a file removal operation.

Syntax

class FTPServerAfterRemoveFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_remove_file() -> Callable[[FTPServerAfterRemoveFileEventParams], None]: ...
@on_after_remove_file.setter
def on_after_remove_file(event_hook: Callable[[FTPServerAfterRemoveFileEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a file removal operation. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_after_rename_file Event

Signals the completion of a file renaming operation.

Syntax

class FTPServerAfterRenameFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_rename_file() -> Callable[[FTPServerAfterRenameFileEventParams], None]: ...
@on_after_rename_file.setter
def on_after_rename_file(event_hook: Callable[[FTPServerAfterRenameFileEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a file renaming operation. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_after_request_attributes Event

Signals the completion of an attribute request.

Syntax

class FTPServerAfterRequestAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_after_request_attributes() -> Callable[[FTPServerAfterRequestAttributesEventParams], None]: ...
@on_after_request_attributes.setter
def on_after_request_attributes(event_hook: Callable[[FTPServerAfterRequestAttributesEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of an attribute request. Check the operation status, and alter it, if needed, through the OperationStatus parameter:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_auth_attempt Event

Fires when a connected client makes an authentication attempt.

Syntax

class FTPServerAuthAttemptEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def username() -> str: ...

  @property
  def password() -> str: ...

  @property
  def allow() -> bool: ...
  @allow.setter
  def allow(value) -> None: ...

  @property
  def base_path() -> str: ...
  @base_path.setter
  def base_path(value) -> None: ...

# In class FTPServer:
@property
def on_auth_attempt() -> Callable[[FTPServerAuthAttemptEventParams], None]: ...
@on_auth_attempt.setter
def on_auth_attempt(event_hook: Callable[[FTPServerAuthAttemptEventParams], None]) -> None: ...

Remarks

The class fires this event whenever a client attempts to authenticate itself. Use the Allow parameter to let the client through.

The BasePath parameter specifies the home directory that will be used for this client. This is taken from the client's record in users, or from root_directory if the client is not present in the list. You can adjust it in the event handler if required.

ConnectionID contains the unique session identifier for that client, and Username and Password contain the professed credentials.

on_before_change_directory Event

Notifies about an incoming change directory request.

Syntax

class FTPServerBeforeChangeDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_change_directory() -> Callable[[FTPServerBeforeChangeDirectoryEventParams], None]: ...
@on_before_change_directory.setter
def on_before_change_directory(event_hook: Callable[[FTPServerBeforeChangeDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received directory change request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_change_directory to be notified when to perform the request. It is the on_change_directory event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_change_directory event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_create_directory Event

Notifies about an incoming create directory request.

Syntax

class FTPServerBeforeCreateDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_create_directory() -> Callable[[FTPServerBeforeCreateDirectoryEventParams], None]: ...
@on_before_create_directory.setter
def on_before_create_directory(event_hook: Callable[[FTPServerBeforeCreateDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received MKDIR request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_create_directory to be notified when to perform the request. It is the on_create_directory event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_create_directory event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_download_file Event

Notifies about an incoming file download request.

Syntax

class FTPServerBeforeDownloadFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_download_file() -> Callable[[FTPServerBeforeDownloadFileEventParams], None]: ...
@on_before_download_file.setter
def on_before_download_file(event_hook: Callable[[FTPServerBeforeDownloadFileEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received download request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_download_file to be notified when to perform the request. It is the on_download_file event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_transfer_completed event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_find Event

Notifies about an incoming file listing request.

Syntax

class FTPServerBeforeFindEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_find() -> Callable[[FTPServerBeforeFindEventParams], None]: ...
@on_before_find.setter
def on_before_find(event_hook: Callable[[FTPServerBeforeFindEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received file listing request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_find_init, on_find_next, and on_find_close to be notified when to perform the request. It is the on_find_init and on_find_next events handler where you should perform the overridden listing actions.

Upon completion of the request, either in manual or override mode, the on_find_close event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_remove_directory Event

Notifies about an incoming directory removal request.

Syntax

class FTPServerBeforeRemoveDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_remove_directory() -> Callable[[FTPServerBeforeRemoveDirectoryEventParams], None]: ...
@on_before_remove_directory.setter
def on_before_remove_directory(event_hook: Callable[[FTPServerBeforeRemoveDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received directory removal request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_remove_directory to be notified when to perform the request. It is the on_remove_directory event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_remove_directory event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_remove_file Event

Notifies about an incoming file removal request.

Syntax

class FTPServerBeforeRemoveFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_remove_file() -> Callable[[FTPServerBeforeRemoveFileEventParams], None]: ...
@on_before_remove_file.setter
def on_before_remove_file(event_hook: Callable[[FTPServerBeforeRemoveFileEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received file deletion request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_remove_file to be notified when to perform the request. It is the on_remove_file event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_remove_file event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

Note that you must subscribe to on_before_request_attributes and on_request_attributes events to be able to use this event in an FTP server attached to a virtual file system. This is because the server checks the existence of the source file before commencing the deletion procedure. In the virtualized case, you can confirm the existence of the file by returning its details from on_request_attributes call.

on_before_rename_file Event

Notifies about an incoming file rename request.

Syntax

class FTPServerBeforeRenameFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_rename_file() -> Callable[[FTPServerBeforeRenameFileEventParams], None]: ...
@on_before_rename_file.setter
def on_before_rename_file(event_hook: Callable[[FTPServerBeforeRenameFileEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received file rename request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_rename_file to be notified when to perform the request. It is the on_rename_file event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_rename_file event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

Note that you must subscribe to on_before_request_attributes and on_request_attributes events to be able to use this event in an FTP server attached to a virtual file system. This is because the server checks the existence of the source file before commencing the renaming procedure. In the virtualized case, you can confirm the existence of the file by returning its details from on_request_attributes call.

on_before_request_attributes Event

Notifies about an incoming attributes request.

Syntax

class FTPServerBeforeRequestAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_request_attributes() -> Callable[[FTPServerBeforeRequestAttributesEventParams], None]: ...
@on_before_request_attributes.setter
def on_before_request_attributes(event_hook: Callable[[FTPServerBeforeRequestAttributesEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received attributes request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_request_attributes to be notified when to perform the request. It is the on_request_attributes event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_after_request_attributes event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_before_send_reply Event

Notifies the application of a command reply being sent.

Syntax

class FTPServerBeforeSendReplyEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def code() -> int: ...
  @code.setter
  def code(value) -> None: ...

  @property
  def reply() -> str: ...
  @reply.setter
  def reply(value) -> None: ...

  @property
  def command() -> str: ...

# In class FTPServer:
@property
def on_before_send_reply() -> Callable[[FTPServerBeforeSendReplyEventParams], None]: ...
@on_before_send_reply.setter
def on_before_send_reply(event_hook: Callable[[FTPServerBeforeSendReplyEventParams], None]) -> None: ...

Remarks

The class fires this event to tell the application that a command reply is about to be sent. The Command parameter indicates the command that induced the reply, and Code and Reply indicate the pre-generated response.

You can alter the response parameters in your code to send bespoke replies.

on_before_upload_file Event

Notifies about an incoming file upload request.

Syntax

class FTPServerBeforeUploadFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def append() -> bool: ...

  @property
  def action() -> int: ...
  @action.setter
  def action(value) -> None: ...

# In class FTPServer:
@property
def on_before_upload_file() -> Callable[[FTPServerBeforeUploadFileEventParams], None]: ...
@on_before_upload_file.setter
def on_before_upload_file(event_hook: Callable[[FTPServerBeforeUploadFileEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application about a received upload request. ConnectionID identifies the connected client.

Set Action to fraAuto to let the server handle the request automatically, or to fraCustom to handle the request in your code. Subscribe to on_upload_file to be notified when to perform the request. It is the on_upload_file event handler where you should perform the overridden action.

Upon completion of the request, either in manual or override mode, the on_transfer_completed event will be fired.

Choose Action as one of the following values:

fraAuto1Handle the requested action automatically by the server

fraCustom2Override the action using the user code logic

fraAbort3Abort the requested action

on_change_directory Event

An override for a directory change operation.

Syntax

class FTPServerChangeDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...
  @directory.setter
  def directory(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_change_directory() -> Callable[[FTPServerChangeDirectoryEventParams], None]: ...
@on_change_directory.setter
def on_change_directory(event_hook: Callable[[FTPServerChangeDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden directory change operation.

This event only fires if Action = fraCustom was passed back from on_before_change_directory event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_change_directory call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_command_processed Event

Signals that a command has been processed by the server.

Syntax

class FTPServerCommandProcessedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def current_directory() -> str: ...

  @property
  def command() -> str: ...

  @property
  def reply_code() -> int: ...

# In class FTPServer:
@property
def on_command_processed() -> Callable[[FTPServerCommandProcessedEventParams], None]: ...
@on_command_processed.setter
def on_command_processed(event_hook: Callable[[FTPServerCommandProcessedEventParams], None]) -> None: ...

Remarks

The class fires this event to signal that a command has been processed by the server, and a reply code has been generated.

You can adjust the reply code and the textual comment associated with it in on_before_send_reply event handler.

on_command_received Event

Signals that a command has been received from the client.

Syntax

class FTPServerCommandReceivedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def command() -> str: ...

  @property
  def parameters() -> str: ...

  @property
  def ignore() -> bool: ...
  @ignore.setter
  def ignore(value) -> None: ...

# In class FTPServer:
@property
def on_command_received() -> Callable[[FTPServerCommandReceivedEventParams], None]: ...
@on_command_received.setter
def on_command_received(event_hook: Callable[[FTPServerCommandReceivedEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application of an incoming command. Set Ignore to True to stop the server from handling the command.

When the command has been processed, the server will report it via the on_command_processed call.

on_connect Event

Reports an accepted connection.

Syntax

class FTPServerConnectEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def remote_address() -> str: ...

  @property
  def port() -> int: ...

# In class FTPServer:
@property
def on_connect() -> Callable[[FTPServerConnectEventParams], None]: ...
@on_connect.setter
def on_connect(event_hook: Callable[[FTPServerConnectEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a new connection has been established. ConnectionId indicates the unique ID assigned to this connection. The same ID will be supplied to any other events related to this connection, such as on_auth_attempt or on_before_upload_file.

on_create_directory Event

An override for a directory creation operation.

Syntax

class FTPServerCreateDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...
  @directory.setter
  def directory(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_create_directory() -> Callable[[FTPServerCreateDirectoryEventParams], None]: ...
@on_create_directory.setter
def on_create_directory(event_hook: Callable[[FTPServerCreateDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden directory creation operation.

This event only fires if Action = fraCustom was passed back from on_before_create_directory event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_create_directory call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_disconnect Event

Fires to report a disconnected client.

Syntax

class FTPServerDisconnectEventParams(object):
  @property
  def connection_id() -> int: ...

# In class FTPServer:
@property
def on_disconnect() -> Callable[[FTPServerDisconnectEventParams], None]: ...
@on_disconnect.setter
def on_disconnect(event_hook: Callable[[FTPServerDisconnectEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client disconnects.

on_download_begin Event

The class fires this event to notify the application about the start of a file download.

Syntax

class FTPServerDownloadBeginEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

# In class FTPServer:
@property
def on_download_begin() -> Callable[[FTPServerDownloadBeginEventParams], None]: ...
@on_download_begin.setter
def on_download_begin(event_hook: Callable[[FTPServerDownloadBeginEventParams], None]) -> None: ...

Remarks

Subscribe to this event to get notified about the beginning of a file download operation. The requested file is specified via the Path property.

on_download_end Event

Reports the completion of the download operation.

Syntax

class FTPServerDownloadEndEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

# In class FTPServer:
@property
def on_download_end() -> Callable[[FTPServerDownloadEndEventParams], None]: ...
@on_download_end.setter
def on_download_end(event_hook: Callable[[FTPServerDownloadEndEventParams], None]) -> None: ...

Remarks

Use this event to get notified about completion of the early initiated file download operation.

on_download_file Event

An override for a file download initiation operation.

Syntax

class FTPServerDownloadFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_download_file() -> Callable[[FTPServerDownloadFileEventParams], None]: ...
@on_download_file.setter
def on_download_file(event_hook: Callable[[FTPServerDownloadFileEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden file download initiation operation.

This event only fires if Action = fraCustom was passed back from on_before_download_file event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by a number of on_read_file calls, requesting the file data from your code, followed by a single on_transfer_completed call.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_download_progress Event

Reports the progress of an active download operation.

Syntax

class FTPServerDownloadProgressEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def progress() -> int: ...

  @property
  def total() -> int: ...

# In class FTPServer:
@property
def on_download_progress() -> Callable[[FTPServerDownloadProgressEventParams], None]: ...
@on_download_progress.setter
def on_download_progress(event_hook: Callable[[FTPServerDownloadProgressEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the progress of an active download operation.

The Path parameter contains the path to the file being downloaded, and Progress and Total reflect the operation progress. Note that the Total parameter may be set to -1 if the size of the downloaded file is not known.

on_error Event

Information about errors during data delivery.

Syntax

class FTPServerErrorEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def error_code() -> int: ...

  @property
  def fatal() -> bool: ...

  @property
  def remote() -> bool: ...

  @property
  def description() -> str: ...

# In class FTPServer:
@property
def on_error() -> Callable[[FTPServerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[FTPServerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during message processing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to the FTP section.

on_external_sign Event

Handles remote or external signing initiated by the server protocol.

Syntax

class FTPServerExternalSignEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class FTPServer:
@property
def on_external_sign() -> Callable[[FTPServerExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[FTPServerExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_find_close Event

Signals the completion of a directory listing request.

Syntax

class FTPServerFindCloseEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_find_close() -> Callable[[FTPServerFindCloseEventParams], None]: ...
@on_find_close.setter
def on_find_close(event_hook: Callable[[FTPServerFindCloseEventParams], None]) -> None: ...

Remarks

The class fires this event upon completion of a directory listing request. Check the operation status, and alter it, if needed, through the OperationStatus parameter.

on_find_init Event

An override for a directory listing initiation operation.

Syntax

class FTPServerFindInitEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...
  @directory.setter
  def directory(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_find_init() -> Callable[[FTPServerFindInitEventParams], None]: ...
@on_find_init.setter
def on_find_init(event_hook: Callable[[FTPServerFindInitEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application prepare for directory listing retrieval.

This event only fires if Action = fraCustom was passed back from on_before_find event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by a number of on_find_next calls, requesting the directory listing entry by entry from your code, followed by a on_find_close call.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_find_next Event

An override for a directory listing entry request operation.

Syntax

class FTPServerFindNextEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_find_next() -> Callable[[FTPServerFindNextEventParams], None]: ...
@on_find_next.setter
def on_find_next(event_hook: Callable[[FTPServerFindNextEventParams], None]) -> None: ...

Remarks

The class fires this event in a loop after calling on_find_init to request one directory entry from the application.

This event only fires if Action = fraCustom was passed back from on_before_find event. No default listing operation will be performed by the server component.

Inside the handler, pass the entry details to the server component by tuning up the client_file_entry object to contain the details of the requested entry, and committing those details to the component with set_client_file_entry method.

Use the OperationStatus parameter to return the operation result back to the server. After submitting all the directory entries to the component, set OperationStatus to ostEOF to tell the components that no more entries are left.

This event will be followed by on_find_close call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class FTPServerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class FTPServer:
@property
def on_notification() -> Callable[[FTPServerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[FTPServerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

DownloadProgressReports the progress of the current download operation. The EventParam value passed with this EventID is a string of the following format:

ConnectionID=3;Path=/dir/file;Progress=2048;Total=16000

UploadProgressReports the progress of the current upload operation. The format of EventParam is identical to the one used by the DownloadProgress.
DownloadBeginIndicates the start of the download operation. The EventParam value has the following format:

ConnectionID=8;Path=/dir/file

UploadBeginIndicates the start of the upload operation. The EventParam format is the same as with the DownloadBegin event ID.
DownloadEndIndicates the completion of the download operation. The EventParam value has the following format:

ConnectionID=8;Path=/dir/file

UploadEndIndicates the completion of the upload operation. The EventParam format is the same as with the DownloadEnd event ID.
ListeningStartedNotifies the application that the server has started listening for incoming connections.
ListeningStoppedNotifies the application that the server has stopped listening to incoming connections.

on_read_file Event

Requests a piece of file data from the application.

Syntax

class FTPServerReadFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def size() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_read_file() -> Callable[[FTPServerReadFileEventParams], None]: ...
@on_read_file.setter
def on_read_file(event_hook: Callable[[FTPServerReadFileEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly during an overridden download operation to request file data from the application.

The handler of this event should read up to Size bytes from the downloaded file, and pass them to the component with a set_client_buffer call.

Use the OperationStatus parameter to return the operation result back to the server. When the file has been read up to its end, set OperationStatus to ostEOF to tell the components that no more on_read_file calls are needed.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_remove_directory Event

An override for a directory removal operation.

Syntax

class FTPServerRemoveDirectoryEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def directory() -> str: ...
  @directory.setter
  def directory(value) -> None: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_remove_directory() -> Callable[[FTPServerRemoveDirectoryEventParams], None]: ...
@on_remove_directory.setter
def on_remove_directory(event_hook: Callable[[FTPServerRemoveDirectoryEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden directory removal operation.

This event only fires if Action = fraCustom was passed back from on_before_remove_directory event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_remove_directory call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_remove_file Event

An override for a file remove operation.

Syntax

class FTPServerRemoveFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_remove_file() -> Callable[[FTPServerRemoveFileEventParams], None]: ...
@on_remove_file.setter
def on_remove_file(event_hook: Callable[[FTPServerRemoveFileEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden file removal operation.

This event only fires if Action = fraCustom was passed back from on_before_remove_file event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_remove_file call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

Please see a remark about virtualizing file removals in the on_before_remove_file topic.

on_rename_file Event

An override for a file rename operation.

Syntax

class FTPServerRenameFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def old_path() -> str: ...

  @property
  def new_path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_rename_file() -> Callable[[FTPServerRenameFileEventParams], None]: ...
@on_rename_file.setter
def on_rename_file(event_hook: Callable[[FTPServerRenameFileEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden file rename operation.

This event only fires if Action = fraCustom was passed back from on_before_rename_file event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_rename_file call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

Please see a remark about virtualizing file renamings in the on_before_rename_file topic.

on_request_attributes Event

An override for an attribute request.

Syntax

class FTPServerRequestAttributesEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_request_attributes() -> Callable[[FTPServerRequestAttributesEventParams], None]: ...
@on_request_attributes.setter
def on_request_attributes(event_hook: Callable[[FTPServerRequestAttributesEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application handle an overridden attribute request operation.

This event only fires if Action = fraCustom was passed back from on_before_request_attributes event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by on_after_request_attributes call which will let you make final adjustments to the returned code.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_tls_cert_validate Event

Fires when a client certificate needs to be validated.

Syntax

class FTPServerTLSCertValidateEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def accept() -> bool: ...
  @accept.setter
  def accept(value) -> None: ...

# In class FTPServer:
@property
def on_tls_cert_validate() -> Callable[[FTPServerTLSCertValidateEventParams], None]: ...
@on_tls_cert_validate.setter
def on_tls_cert_validate(event_hook: Callable[[FTPServerTLSCertValidateEventParams], None]) -> None: ...

Remarks

The class fires this event to notify the application of an authenticating client. Use the event handler to validate the certificate and pass your decision back to the server component via the Accept parameter.

on_tls_established Event

Reports the setup of a TLS session.

Syntax

class FTPServerTLSEstablishedEventParams(object):
  @property
  def connection_id() -> int: ...

# In class FTPServer:
@property
def on_tls_established() -> Callable[[FTPServerTLSEstablishedEventParams], None]: ...
@on_tls_established.setter
def on_tls_established(event_hook: Callable[[FTPServerTLSEstablishedEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the setup of a TLS connection by a connected client.

on_tls_handshake Event

Fires when a newly established client connection initiates a TLS handshake.

Syntax

class FTPServerTLSHandshakeEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def server_name() -> str: ...

  @property
  def abort() -> bool: ...
  @abort.setter
  def abort(value) -> None: ...

# In class FTPServer:
@property
def on_tls_handshake() -> Callable[[FTPServerTLSHandshakeEventParams], None]: ...
@on_tls_handshake.setter
def on_tls_handshake(event_hook: Callable[[FTPServerTLSHandshakeEventParams], None]) -> None: ...

Remarks

Use this event to get notified about the initiation of the TLS handshake by the remote client. The ServerName parameter specifies the requested host from the client hello message.

on_tls_psk Event

Requests a pre-shared key for TLS-PSK.

Syntax

class FTPServerTLSPSKEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def identity() -> str: ...

  @property
  def psk() -> str: ...
  @psk.setter
  def psk(value) -> None: ...

  @property
  def ciphersuite() -> str: ...
  @ciphersuite.setter
  def ciphersuite(value) -> None: ...

# In class FTPServer:
@property
def on_tls_psk() -> Callable[[FTPServerTLSPSKEventParams], None]: ...
@on_tls_psk.setter
def on_tls_psk(event_hook: Callable[[FTPServerTLSPSKEventParams], None]) -> None: ...

Remarks

The class fires this event to report that a client has requested a TLS-PSK negotiation. ConnectionId indicates the unique connection ID that requested the PSK handshake.

Use Identity to look up for the corresponding pre-shared key in the server's database, then assign the key to the PSK parameter. If TLS 1.3 PSK is used, you will also need to assign the Ciphersuite parameter with the cipher suite associated with that identity and their key.

on_tls_shutdown Event

Reports closure of a TLS session.

Syntax

class FTPServerTLSShutdownEventParams(object):
  @property
  def connection_id() -> int: ...

# In class FTPServer:
@property
def on_tls_shutdown() -> Callable[[FTPServerTLSShutdownEventParams], None]: ...
@on_tls_shutdown.setter
def on_tls_shutdown(event_hook: Callable[[FTPServerTLSShutdownEventParams], None]) -> None: ...

Remarks

The class fires this event when a connected client closes their TLS session gracefully. This event is typically followed by a on_disconnect, which marks the closure of the underlying TCP session.

on_transfer_completed Event

This event is fired when a customized upload or download operation completes.

Syntax

class FTPServerTransferCompletedEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_transfer_completed() -> Callable[[FTPServerTransferCompletedEventParams], None]: ...
@on_transfer_completed.setter
def on_transfer_completed(event_hook: Callable[[FTPServerTransferCompletedEventParams], None]) -> None: ...

Remarks

This event is fired when a customized transfer operation completes. This event is only fired for operations handled by the user code, i.e. those intercepted with on_before_upload_file or on_before_download_file event, and with Action parameter set to fraCustom.

The ConnectionID parameter specifies the session to which the event belongs, and OperationStatus reports the outcome of the transfer operation.

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_upload_begin Event

The server fires this event to notify the application about the start of a file upload operation.

Syntax

class FTPServerUploadBeginEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

# In class FTPServer:
@property
def on_upload_begin() -> Callable[[FTPServerUploadBeginEventParams], None]: ...
@on_upload_begin.setter
def on_upload_begin(event_hook: Callable[[FTPServerUploadBeginEventParams], None]) -> None: ...

Remarks

Use this event to get notified about the beginning of a file upload operation. The file that is about to be uploaded is specified via the Path property.

on_upload_end Event

Reports the completion of the upload operation.

Syntax

class FTPServerUploadEndEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

# In class FTPServer:
@property
def on_upload_end() -> Callable[[FTPServerUploadEndEventParams], None]: ...
@on_upload_end.setter
def on_upload_end(event_hook: Callable[[FTPServerUploadEndEventParams], None]) -> None: ...

Remarks

Use this event to receive notifications about completion of file upload operations.

on_upload_file Event

An override for a file upload initiation operation.

Syntax

class FTPServerUploadFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def restart_at() -> int: ...

  @property
  def append() -> bool: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_upload_file() -> Callable[[FTPServerUploadFileEventParams], None]: ...
@on_upload_file.setter
def on_upload_file(event_hook: Callable[[FTPServerUploadFileEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application perform an overridden file upload initiation operation.

This event only fires if Action = fraCustom was passed back from on_before_upload_file event, and expects your code to perform the requested operation inside the handler. No default operation will be performed by the server component.

Use the OperationStatus parameter to return the operation result back to the server.

This event will be followed by a number of on_write_file calls, passing the file data to your code, followed by a single on_transfer_completed call.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

on_upload_progress Event

Reports the progress of an active upload operation.

Syntax

class FTPServerUploadProgressEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def path() -> str: ...

  @property
  def progress() -> int: ...

  @property
  def total() -> int: ...

# In class FTPServer:
@property
def on_upload_progress() -> Callable[[FTPServerUploadProgressEventParams], None]: ...
@on_upload_progress.setter
def on_upload_progress(event_hook: Callable[[FTPServerUploadProgressEventParams], None]) -> None: ...

Remarks

Subscribe to this event to be notified about the progress of an active upload operation.

The Path parameter specifies the path to the file being uploaded, and Progress and Total reflect the operation progress. The Total parameter may be set to -1 if the size of the uploaded file is not known.

on_write_file Event

Hands a piece of file data to the application.

Syntax

class FTPServerWriteFileEventParams(object):
  @property
  def connection_id() -> int: ...

  @property
  def operation_status() -> int: ...
  @operation_status.setter
  def operation_status(value) -> None: ...

# In class FTPServer:
@property
def on_write_file() -> Callable[[FTPServerWriteFileEventParams], None]: ...
@on_write_file.setter
def on_write_file(event_hook: Callable[[FTPServerWriteFileEventParams], None]) -> None: ...

Remarks

The class fires this event repeatedly during an overridden upload operation to pass file data to the application.

The handler of this event should retrieve the pending data buffer with a get_client_buffer call, and write it to the end of the file that is being uploaded.

Use the OperationStatus parameter to return the operation result back to the server.

Set OperationStatus to one of the following values:

ostOk1
ostNoSuchFile2
ostAccessDenied3
ostWriteProtect4
ostUnsupported5
ostInvalidParameter6
ostEOF7

FTPServer Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

FTPServer Config Settings

ActiveChannel:   The channel to which the event that is being invoked corresponds.

Use this property to find out which channel, command or data, has invoked the current event. This property returns reliable values and should only be checked while inside an event handler. facCmd = 0; facData = 1;

ClientAuth:   Enables or disables certificate-based client authentication.

Set this property to one of the below values to tune up the client authentication logic:

0No client authentication (the default setting)
1Request certificates. The server will ask connecting clients for their certificates. Non-authenticated client connections will be accepted anyway.
2Require certificates. The server will ask connecting clients for their certificates. If a client fails to provide a certificate, the server will terminate the connection.

If this property is set to 1 or 2, the component will request certificates from the connecting clients. Depending on the setting, the clients that fail to provide their certificate in response will be allowed or disallowed to proceed with the connection. The server signals about a received certificate by firing its on_certificate_validate event. Use pin_client method in the event handler to pin the client details, and access the provided certificate chain via the pinned_client_chain property.

Note that this event is fired from the connecting clients threads, so please make sure you avoid bottlenecks in the event handler and put appropriate thread safety measures in place.

Unlike the client-side components, the server component does not perform automated certificate validation against the local security policy. You must perform appropriate certificate validation steps in your on_certificate_validate event handler.

ControlChannelLog[i]:   Returns the control channel log for a connection.

Use this setting to retrieve the control channel log for a particular client connection. Any sensitive data, such as passwords, is returned masked.

DualStack:   Allows the use of ip4 and ip6 simultaneously.

This setting specifies a socket can use ip4 and ip6 simultaneously.

MessageTable[i]:   Provides access to error code descriptions.

Use this property to get or set textual error code descriptions (e.g. 226 = Transfer Complete).

RefreshUsers:   Enables or disables real-time propagation of user information.

Set this property to true to make the content of the Users property propagate to the server immediately. The default setting is false, which delays the effect of any changes in the Users setting until the server is restarted.

SecurityOptions:   Facilitates fine-tuning of lower-level security settings.

This property is a bit mask offering the following individual parameters:

  • cfsoPlainLogin (1)
  • cfsoEncryption (2)
  • cfsoAuth (4);
  • cfsoClearControlChannel (8)
  • cfsoClearDataChannel (16)
  • cfsoEncryptedDataChannel (32)
Combine the above parameters to enable or disable certain security aspects of the server.

Base Config Settings

ASN1UseGlobalTagCache:   Controls whether ASN.1 module should use a global object cache.

This is a performance setting. It is unlikely that you will ever need to adjust it.

AssignSystemSmartCardPins:   Specifies whether CSP-level PINs should be assigned to CNG keys.

This is a low-level tweak for certain cryptographic providers. It is unlikely that you will ever need to adjust it.

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching
globalGlobal caching

Cookies:   Gets or sets local cookies for the class.

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

DNSLocalSuffix:   The suffix to assign for TLD names.

Use this global setting to adjust the default suffix to assign to top-level domain names. The default is .local.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HardwareCryptoUsePolicy:   The hardware crypto usage policy.

This global setting controls the hardware cryptography usage policy: auto, enable, or disable.

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

HttpVersion:   The HTTP version to use in any inner HTTP client components created.

Set this property to 1.0 or 1.1 to indicate the HTTP version that any internal HTTP clients should use.

IgnoreExpiredMSCTLSigningCert:   Whether to tolerate the expired Windows Update signing certificate.

It is not uncommon for Microsoft Windows Update Certificate Trust List to be signed with an expired Microsoft certificate. Setting this global property to true makes SBB ignore the expired factor and take the Trust List into account.

ListDelimiter:   The delimiter character for multi-element lists.

Allows to set the delimiter for any multi-entry values returned by the component as a string object, such as file lists. For most of the components, this property is set to a newline sequence.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

OldClientSideRSAFallback:   Specifies whether the SSH client should use a SHA1 fallback.

Tells the SSH client to use a legacy ssh-rsa authentication even if the server indicates support for newer algorithms, such as rsa-sha-256. This is a backward-compatibility tweak.

ProductVersion:   Returns the version of the SecureBlackbox library.

This property returns the long version string of the SecureBlackbox library being used (major.minor.build.revision).

ServerSSLDHKeyLength:   Sets the size of the TLS DHE key exchange group.

Use this property to adjust the length, in bits, of the DHE prime to be used by the TLS server.

StaticDNS:   Specifies whether static DNS rules should be used.

Set this property to enable or disable static DNS rules for the class. Works only if UseOwnDNSResolver is set to true.

Supported values are:

noneNo static DNS rules (default)
localLocal static DNS rules
globalGlobal static DNS rules

StaticIPAddress[domain]:   Gets or sets an IP address for the specified domain name.

Use this property to get or set an IP address for the specified domain name in the internal (of the class) or global DNS rules storage depending on the StaticDNS value. The type of the IP address (IPv4 or IPv6) is determined automatically. If both addresses are available, they are devided by the | (pipe) character.

StaticIPAddresses:   Gets or sets all the static DNS rules.

Use this property to get static DNS rules from the current rules storage or restore them back between application sessions. If StaticDNS of the class is set to "local", the property returns/restores the rules from/to the internal storage of the class. If StaticDNS of the class is set to "global", the property returns/restores the rules from/to the GLOBAL storage. The rules list is returned and accepted in JSON format.

Tag:   Allows to store any custom data.

Use this config property to store any custom data.

TLSSessionGroup:   Specifies the group name of TLS sessions to be used for session resumption.

Use this property to limit the search of chached TLS sessions to the specified group. Sessions from other groups will be ignored. By default, all sessions are cached with an empty group name and available to all the classes.

TLSSessionLifetime:   Specifies lifetime in seconds of the cached TLS session.

Use this property to specify how much time the TLS session should be kept in the session cache. After this time, the session expires and will be automatically removed from the cache. Default value is 300 seconds (5 minutes).

TLSSessionPurgeInterval:   Specifies how often the session cache should remove the expired TLS sessions.

Use this property to specify the time interval of purging the expired TLS sessions from the session cache. Default value is 60 seconds (1 minute).

UseInternalRandom:   Switches between SecureBlackbox-own and platform PRNGs.

Allows to switch between internal/native PRNG implementation and the one provided by the platform.

UseLegacyAdESValidation:   Enables legacy AdES validation mode.

Use this setting to switch the AdES component to the validation approach that was used in SBB 2020/SBB 2022 (less attention to temporal details).

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemNativeSizeCalculation:   An internal CryptoAPI access tweak.

This is an internal setting. Please do not use it unless instructed by the support team.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

FTPServer Errors

FTPServer Errors

1048577   Invalid parameter (SB_ERROR_INVALID_PARAMETER)
1048578   Invalid configuration (SB_ERROR_INVALID_SETUP)
1048579   Invalid state (SB_ERROR_INVALID_STATE)
1048580   Invalid value (SB_ERROR_INVALID_VALUE)
1048581   Private key not found (SB_ERROR_NO_PRIVATE_KEY)
1048582   Cancelled by the user (SB_ERROR_CANCELLED_BY_USER)
1048583   The file was not found (SB_ERROR_NO_SUCH_FILE)
1048584   Unsupported feature or operation (SB_ERROR_UNSUPPORTED_FEATURE)
1048585   General error (SB_ERROR_GENERAL_ERROR)
18874369   Unsupported file operation (SB_ERROR_FTP_UNSUPPORTED_FILE_OPERATION)