SOAPQuickSigner Class

Properties   Methods   Events   Config Settings   Errors  

The SOAPQuickSigner class signs SOAP messages.

Syntax

class secureblackbox.SOAPQuickSigner

Remarks

The purpose of the SOAPQuickSigner class is creating simple generic signatures over SOAP messages. Unlike SOAPSigner, it does not include chain validation and LTV features, and may be more appropriate for scenarios where no chain validation is required.

Property List

---

The following is the full list of the properties of the class with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the class with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the class with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the class with short descriptions. Click on the links for further details.

canonicalization_method Property

Specifies XML canonicalization method to use.

Syntax

def get_canonicalization_method() -> int: ...
def set_canonicalization_method(value: int) -> None: ...

canonicalization_method = property(get_canonicalization_method, set_canonicalization_method)

Default Value

1

Remarks

Use this property to specify the method for XML canonicalization of SignedInfo element. See XML-Signature Syntax and Processing specification for details.

Supported canonicalization methods:

embed_certificate_method Property

Controls the certificate disposition within the signature.

Syntax

def get_embed_certificate_method() -> int: ...
def set_embed_certificate_method(value: int) -> None: ...

embed_certificate_method = property(get_embed_certificate_method, set_embed_certificate_method)

Default Value

1

Remarks

This property controls the method of embedding the signing certificate(s) into the signature if WS-Security signature type is used.

Supported values:

encoding Property

Specifies XML encoding.

Syntax

def get_encoding() -> str: ...
def set_encoding(value: str) -> None: ...

encoding = property(get_encoding, set_encoding)

Default Value

""

Remarks

Use this property to specify the encoding to apply to the XML documents.

external_crypto_async_document_id Property

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Syntax

def get_external_crypto_async_document_id() -> str: ...
def set_external_crypto_async_document_id(value: str) -> None: ...

external_crypto_async_document_id = property(get_external_crypto_async_document_id, set_external_crypto_async_document_id)

Default Value

""

Remarks

Specifies an optional document ID for SignAsyncBegin() and SignAsyncEnd() calls.

Use this property when working with multi-signature DCAuth requests and responses to uniquely identify documents signed within a larger batch. On the completion stage, this value helps the signing component identify the correct signature in the returned batch of responses.

If using batched requests, make sure to set this property to the same value on both the pre-signing (SignAsyncBegin) and completion (SignAsyncEnd) stages.

external_crypto_custom_params Property

Custom parameters to be passed to the signing service (uninterpreted).

Syntax

def get_external_crypto_custom_params() -> str: ...
def set_external_crypto_custom_params(value: str) -> None: ...

external_crypto_custom_params = property(get_external_crypto_custom_params, set_external_crypto_custom_params)

Default Value

""

Remarks

Custom parameters to be passed to the signing service (uninterpreted).

external_crypto_data Property

Additional data to be included in the async state and mirrored back by the requestor.

Syntax

def get_external_crypto_data() -> str: ...
def set_external_crypto_data(value: str) -> None: ...

external_crypto_data = property(get_external_crypto_data, set_external_crypto_data)

Default Value

""

Remarks

Additional data to be included in the async state and mirrored back by the requestor.

external_crypto_external_hash_calculation Property

Specifies whether the message hash is to be calculated at the external endpoint.

Syntax

def get_external_crypto_external_hash_calculation() -> bool: ...
def set_external_crypto_external_hash_calculation(value: bool) -> None: ...

external_crypto_external_hash_calculation = property(get_external_crypto_external_hash_calculation, set_external_crypto_external_hash_calculation)

Default Value

FALSE

Remarks

Specifies whether the message hash is to be calculated at the external endpoint. Please note that this mode is not supported by the DCAuth class.

If set to true, the class will pass a few kilobytes of to-be-signed data from the document to the OnExternalSign event. This only applies when SignExternal() is called.

external_crypto_hash_algorithm Property

Specifies the request's signature hash algorithm.

Syntax

def get_external_crypto_hash_algorithm() -> str: ...
def set_external_crypto_hash_algorithm(value: str) -> None: ...

external_crypto_hash_algorithm = property(get_external_crypto_hash_algorithm, set_external_crypto_hash_algorithm)

Default Value

"SHA256"

Remarks

Specifies the request's signature hash algorithm.

external_crypto_key_id Property

The ID of the pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_id() -> str: ...
def set_external_crypto_key_id(value: str) -> None: ...

external_crypto_key_id = property(get_external_crypto_key_id, set_external_crypto_key_id)

Default Value

""

Remarks

The ID of the pre-shared key used for DC request authentication.

Asynchronous DCAuth-driven communication requires that parties authenticate each other with a secret pre-shared cryptographic key. This provides an extra protection layer for the protocol and diminishes the risk of the private key becoming abused by foreign parties. Use this property to provide the pre-shared key identifier, and use external_crypto_key_secret to pass the key itself.

The same KeyID/KeySecret pair should be used on the DCAuth side for the signing requests to be accepted.

Note: The KeyID/KeySecret scheme is very similar to the AuthKey scheme used in various Cloud service providers to authenticate users.

Example: signer.ExternalCrypto.KeyID = "MainSigningKey"; signer.ExternalCrypto.KeySecret = "abcdef0123456789";

external_crypto_key_secret Property

The pre-shared key used for DC request authentication.

Syntax

def get_external_crypto_key_secret() -> str: ...
def set_external_crypto_key_secret(value: str) -> None: ...

external_crypto_key_secret = property(get_external_crypto_key_secret, set_external_crypto_key_secret)

Default Value

""

Remarks

The pre-shared key used for DC request authentication. This key must be set and match the key used by the DCAuth counterpart for the scheme to work.

Read more about configuring authentication in the external_crypto_key_id topic.

external_crypto_method Property

Specifies the asynchronous signing method.

Syntax

def get_external_crypto_method() -> int: ...
def set_external_crypto_method(value: int) -> None: ...

external_crypto_method = property(get_external_crypto_method, set_external_crypto_method)

Default Value

0

Remarks

Specifies the asynchronous signing method. This is typically defined by the DC server capabilities and setup.

Available options:

external_crypto_mode Property

Specifies the external cryptography mode.

Syntax

def get_external_crypto_mode() -> int: ...
def set_external_crypto_mode(value: int) -> None: ...

external_crypto_mode = property(get_external_crypto_mode, set_external_crypto_mode)

Default Value

0

Remarks

Specifies the external cryptography mode.

Available options:

external_crypto_public_key_algorithm Property

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

Syntax

def get_external_crypto_public_key_algorithm() -> str: ...
def set_external_crypto_public_key_algorithm(value: str) -> None: ...

external_crypto_public_key_algorithm = property(get_external_crypto_public_key_algorithm, set_external_crypto_public_key_algorithm)

Default Value

""

Remarks

Provide the public key algorithm here if the certificate is not available on the pre-signing stage.

fips_mode Property

Reserved.

Syntax

def get_fips_mode() -> bool: ...
def set_fips_mode(value: bool) -> None: ...

fips_mode = property(get_fips_mode, set_fips_mode)

Default Value

FALSE

Remarks

This property is reserved for future use.

hash_algorithm Property

Specifies the hash algorithm to be used.

Syntax

def get_hash_algorithm() -> str: ...
def set_hash_algorithm(value: str) -> None: ...

hash_algorithm = property(get_hash_algorithm, set_hash_algorithm)

Default Value

"SHA256"

Remarks

Use this property to set the hash algorithm for signature calculation.

Supported values:

input_file Property

Specifies the SOAP message to be signed.

Syntax

def get_input_file() -> str: ...
def set_input_file(value: str) -> None: ...

input_file = property(get_input_file, set_input_file)

Default Value

""

Remarks

Provide a full path to the SOAP message to be signed.

output_file Property

A file where the signed SOAP message will be saved.

Syntax

def get_output_file() -> str: ...
def set_output_file(value: str) -> None: ...

output_file = property(get_output_file, set_output_file)

Default Value

""

Remarks

Provide a full path to the file where the signed SOAP message should be saved.

reference_count Property

The number of records in the Reference arrays.

Syntax

def get_reference_count() -> int: ...
def set_reference_count(value: int) -> None: ...

reference_count = property(get_reference_count, set_reference_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• reference_auto_generate_element_id
• reference_canonicalization_method
• reference_custom_element_id
• reference_data_object_description
• reference_data_object_encoding
• reference_data_object_identifier
• reference_data_object_mime_type
• reference_digest_value
• reference_handle
• reference_has_data_object_format
• reference_hash_algorithm
• reference_has_uri
• reference_id
• reference_inclusive_namespaces_prefix_list
• reference_reference_type
• reference_target_data
• reference_target_type
• reference_target_xml_element
• reference_uri
• reference_use_base64_transform
• reference_use_enveloped_signature_transform
• reference_use_xpath_filter2_transform
• reference_use_xpath_transform
• reference_validation_result
• reference_xpath_expression
• reference_xpath_filter2_expressions
• reference_xpath_filter2_filters
• reference_xpath_filter2_prefix_list
• reference_xpath_prefix_list

The array indices start at 0 and end at reference_count - 1.

reference_auto_generate_element_id Property

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing.

Syntax

def get_reference_auto_generate_element_id(reference_index: int) -> bool: ...
def set_reference_auto_generate_element_id(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether the identifier (ID) attribute for a referenced (target) element should be auto-generated during signing. Used when the referenced element doesn't have an ID and CustomElementId and URI properties are empty.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_canonicalization_method Property

Use this property to specify the canonicalization method for the transform of the reference.

Syntax

def get_reference_canonicalization_method(reference_index: int) -> int: ...
def set_reference_canonicalization_method(reference_index: int, value: int) -> None: ...

Default Value

0

Remarks

Use this property to specify the canonicalization method for the transform of the reference. Use cxcmNone value to not to include canonicalization transform in transform chain. See XML-Signature Syntax and Processing specification for details.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_custom_element_id Property

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing.

Syntax

def get_reference_custom_element_id(reference_index: int) -> str: ...
def set_reference_custom_element_id(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Specifies a custom identifier (ID) attribute for a referenced (target) element that will be set on signing. Used when the referenced element doesn't have an ID and URI property is empty.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_data_object_description Property

This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.

Syntax

def get_reference_data_object_description(reference_index: int) -> str: ...
def set_reference_data_object_description(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains textual information related to the referenced data object, which is found in the corresponding DataObjectFormat's Description element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_data_object_encoding Property

This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.

Syntax

def get_reference_data_object_encoding(reference_index: int) -> str: ...
def set_reference_data_object_encoding(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains an indication of the encoding format of the referenced data object, which is found in the corresponding DataObjectFormat's Encoding element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_data_object_identifier Property

This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.

Syntax

def get_reference_data_object_identifier(reference_index: int) -> str: ...
def set_reference_data_object_identifier(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains an identifier indicating the type of the referenced data object, which is found in the corresponding DataObjectFormat's ObjectIdentifier element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_data_object_mime_type Property

This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.

Syntax

def get_reference_data_object_mime_type(reference_index: int) -> str: ...
def set_reference_data_object_mime_type(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property contains an indication of the MIME type of the referenced data object, which is found in the corresponding DataObjectFormat's MimeType element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_digest_value Property

Use this property to get or set the value of the digest calculated over the referenced data.

Syntax

def get_reference_digest_value(reference_index: int) -> bytes: ...
def set_reference_digest_value(reference_index: int, value: bytes) -> None: ...

Remarks

Use this property to get or set the value of the digest calculated over the referenced data.

This property is optional and should be set only if you don't provide the actual data via TargetData or URI. If the data is set, then you don't need to set DigestValue since it will be calculated automatically.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_reference_handle(reference_index: int) -> int: ...
def set_reference_handle(reference_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_has_data_object_format Property

Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.

Syntax

def get_reference_has_data_object_format(reference_index: int) -> bool: ...
def set_reference_has_data_object_format(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether corresponding XAdES DataObjectFormat element is created for the current reference.

Check this property to find out if the reference has an associated DataObjectFormat element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_hash_algorithm Property

Specifies the hash algorithm to be used.

Syntax

def get_reference_hash_algorithm(reference_index: int) -> str: ...
def set_reference_hash_algorithm(reference_index: int, value: str) -> None: ...

Default Value

"SHA256"

Remarks

Specifies the hash algorithm to be used.

Supported values:

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_has_uri Property

Specifies whether the URI is set (even when it is empty).

Syntax

def get_reference_has_uri(reference_index: int) -> bool: ...
def set_reference_has_uri(reference_index: int, value: bool) -> None: ...

Default Value

TRUE

Remarks

Specifies whether the URI is set (even when it is empty).

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_id Property

A user-defined identifier (ID) attribute of this Reference element.

Syntax

def get_reference_id(reference_index: int) -> str: ...
def set_reference_id(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

A user-defined identifier (ID) attribute of this Reference element.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_inclusive_namespaces_prefix_list Property

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference.

Syntax

def get_reference_inclusive_namespaces_prefix_list(reference_index: int) -> str: ...
def set_reference_inclusive_namespaces_prefix_list(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify InclusiveNamespaces PrefixList for exclusive canonicalization transform of the reference. See XML-Signature Syntax and Processing specification for details.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_reference_type Property

The Reference's type attribute as defined in XMLDSIG specification.

Syntax

def get_reference_reference_type(reference_index: int) -> str: ...
def set_reference_reference_type(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

The Reference's type attribute as defined in XMLDSIG specification.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_target_data Property

Contains the referenced external data when the digest value is not explicitly specified.

Syntax

def get_reference_target_data(reference_index: int) -> bytes: ...
def set_reference_target_data(reference_index: int, value: bytes) -> None: ...

Remarks

Contains the referenced external data when the digest value is not explicitly specified.

This property is optional and should only be set if you reference the external data via URI, and you don't provide the digest value explicitly via DigestValue.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_target_type Property

The reference's target type to use.

Syntax

def get_reference_target_type(reference_index: int) -> int: ...
def set_reference_target_type(reference_index: int, value: int) -> None: ...

Default Value

0

Remarks

The reference's target type to use.

Use this property to specify the reference's target type to use when forming the signature.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_target_xml_element Property

This property specifies the referenced XML element.

Syntax

def get_reference_target_xml_element(reference_index: int) -> str: ...
def set_reference_target_xml_element(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

This property specifies the referenced XML element. Used when the URI property is not set. In this case, the URI value is generated based on the ID of the referenced (target) XML element. If the URI property is set, this property is ignored until the ResolveReference event.

Supported values are:

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_uri Property

Use this property to get or set the URL which references the data.

Syntax

def get_reference_uri(reference_index: int) -> str: ...
def set_reference_uri(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to get or set the URL which references the data. If the data is external, the application must set either TargetData or DigestValue. If TargetData is set, the digest is calculated automatically unless it is explicitly set by the application via DigestValue.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_use_base64_transform Property

Specifies whether Base64 transform is included in transform chain.

Syntax

def get_reference_use_base64_transform(reference_index: int) -> bool: ...
def set_reference_use_base64_transform(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether Base64 transform is included in transform chain.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_use_enveloped_signature_transform Property

Specifies whether enveloped signature transform is included in transform chain.

Syntax

def get_reference_use_enveloped_signature_transform(reference_index: int) -> bool: ...
def set_reference_use_enveloped_signature_transform(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether enveloped signature transform is included in transform chain.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_use_xpath_filter2_transform Property

Specifies whether XPath Filter 2.

Syntax

def get_reference_use_xpath_filter2_transform(reference_index: int) -> bool: ...
def set_reference_use_xpath_filter2_transform(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether XPath Filter 2.0 transform is included in transform chain.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_use_xpath_transform Property

Specifies whether XPath transform is included in transform chain.

Syntax

def get_reference_use_xpath_transform(reference_index: int) -> bool: ...
def set_reference_use_xpath_transform(reference_index: int, value: bool) -> None: ...

Default Value

FALSE

Remarks

Specifies whether XPath transform is included in transform chain.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_validation_result Property

The outcome of the cryptographic reference validation.

Syntax

def get_reference_validation_result(reference_index: int) -> bool: ...

Default Value

FALSE

Remarks

The outcome of the cryptographic reference validation.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

This property is read-only.

reference_xpath_expression Property

Use this property to specify XPath expression for XPath transform of the reference.

Syntax

def get_reference_xpath_expression(reference_index: int) -> str: ...
def set_reference_xpath_expression(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify XPath expression for XPath transform of the reference.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_xpath_filter2_expressions Property

Use this property to specify XPointer expression(s) for XPath Filter 2.

Syntax

def get_reference_xpath_filter2_expressions(reference_index: int) -> str: ...
def set_reference_xpath_filter2_expressions(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify XPointer expression(s) for XPath Filter 2.0 transform of the reference.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_xpath_filter2_filters Property

Use this property to specify XPointer filter(s) for XPath Filter 2.

Syntax

def get_reference_xpath_filter2_filters(reference_index: int) -> str: ...
def set_reference_xpath_filter2_filters(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify XPointer filter(s) for XPath Filter 2.0 transform of the reference. The prefix list is comma-separated.

Supported values:

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_xpath_filter2_prefix_list Property

Use this property to specify a prefix list for XPath Filter 2.

Syntax

def get_reference_xpath_filter2_prefix_list(reference_index: int) -> str: ...
def set_reference_xpath_filter2_prefix_list(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify a prefix list for XPath Filter 2.0 transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

reference_xpath_prefix_list Property

Use this property to specify a prefix list for XPath transform of the reference.

Syntax

def get_reference_xpath_prefix_list(reference_index: int) -> str: ...
def set_reference_xpath_prefix_list(reference_index: int, value: str) -> None: ...

Default Value

""

Remarks

Use this property to specify a prefix list for XPath transform of the reference. The prefix list is space-separated. Namespace URIs that are used are taken from XPathNamespaces property.

The reference_index parameter specifies the index of the item in the array. The size of the array is controlled by the reference_count property.

security_header_index Property

Specifies the SecurityHeader index.

Syntax

def get_security_header_index() -> int: ...
def set_security_header_index(value: int) -> None: ...

security_header_index = property(get_security_header_index, set_security_header_index)

Default Value

-1

Remarks

Use this property to specify the index of SecurityHeader element where to put the signature. If the specified SecurityHeader element doesn't exist then a new SecurityHeader element will be created. The default value is "-1", in this case a new SecurityHeader element will be always created.

signature_type Property

The SOAP signature type to use.

Syntax

def get_signature_type() -> int: ...
def set_signature_type(value: int) -> None: ...

signature_type = property(get_signature_type, set_signature_type)

Default Value

1

Remarks

Use this property to specify the signature type to use when forming the signature.

Supported values:

signing_cert_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_signing_cert_bytes() -> bytes: ...

signing_cert_bytes = property(get_signing_cert_bytes, None)

Remarks

Returns the raw certificate data in DER format.

This property is read-only.

signing_cert_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_signing_cert_handle() -> int: ...
def set_signing_cert_handle(value: int) -> None: ...

signing_cert_handle = property(get_signing_cert_handle, set_signing_cert_handle)

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

signing_chain_count Property

The number of records in the SigningChain arrays.

Syntax

def get_signing_chain_count() -> int: ...
def set_signing_chain_count(value: int) -> None: ...

signing_chain_count = property(get_signing_chain_count, set_signing_chain_count)

Default Value

0

Remarks

This property controls the size of the following arrays:

• signing_chain_bytes
• signing_chain_handle

The array indices start at 0 and end at signing_chain_count - 1.

signing_chain_bytes Property

Returns the raw certificate data in DER format.

Syntax

def get_signing_chain_bytes(signing_chain_index: int) -> bytes: ...

Remarks

Returns the raw certificate data in DER format.

The signing_chain_index parameter specifies the index of the item in the array. The size of the array is controlled by the signing_chain_count property.

This property is read-only.

signing_chain_handle Property

Allows to get or set a 'handle', a unique identifier of the underlying property object.

Syntax

def get_signing_chain_handle(signing_chain_index: int) -> int: ...
def set_signing_chain_handle(signing_chain_index: int, value: int) -> None: ...

Default Value

0

Remarks

Allows to get or set a 'handle', a unique identifier of the underlying property object. Use this property to assign objects of the same type in a quicker manner, without copying them fieldwise.

When you pass a handle of one object to another, the source object is copied to the destination rather than assigned. It is safe to get rid of the original object after such operation. pdfSigner.setSigningCertHandle(certMgr.getCertHandle());

The signing_chain_index parameter specifies the index of the item in the array. The size of the array is controlled by the signing_chain_count property.

add_body_reference Method

Creates a new XML reference to the Body element of the SOAP message.

Syntax

def add_body_reference(custom_id: str, auto_generate_id: bool) -> int: ...

Remarks

Use this method to add a reference to the Body element of the SOAP message.

The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.

Use canonicalization_method and hash_algorithm properties to specify the canonicalization method and hash algorithm to use.

The method returns the index of the new reference entry in the references collection.

add_data_reference Method

Creates a new XML reference to the specified data.

Syntax

def add_data_reference(data_uri: str, data: bytes) -> int: ...

Remarks

Use this method to add a reference to the custom data. Pass the reference's URI via DataURI parameter.

Use hash_algorithm property to specify the hash algorithm to use.

The method returns the index of the new reference entry in the references collection.

add_known_namespace Method

Adds known prefix and correspondent namespace URI.

Syntax

def add_known_namespace(prefix: str, uri: str) -> None: ...

Remarks

Use this method to add a known prefix and namespace URI that are used in XPath expression within XMLElement/XMLNode property, and within TargetXMLElement and XPathPrefixList properties of the references.

add_reference Method

Creates a new XML reference to the specified XML element.

Syntax

def add_reference(target_xml_element: str, custom_id: str, auto_generate_id: bool) -> int: ...

Remarks

Use this method to add a reference to a particular XML element.

The reference's URI is set basing on the ID of the XML element. If the XML element doesn't have an ID then a CustomId value will be used. If CustomId is empty and AutoGenerateId is set, the ID will be generated automatically. An exception will be thrown otherwise.

Use canonicalization_method and hash_algorithm properties to specify the canonicalization method and hash algorithm to use.

The method returns the index of the new reference entry in the references collection.

config Method

Sets or retrieves a configuration setting.

Syntax

def config(configuration_string: str) -> str: ...

Remarks

config is a generic method available in every class. It is used to set and retrieve configuration settings for the class.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

do_action Method

Performs an additional action.

Syntax

def do_action(action_id: str, action_params: str) -> str: ...

Remarks

do_action is a generic method available in every class. It is used to perform an additional action introduced after the product major release. The list of actions is not fixed, and may be flexibly extended over time.

The unique identifier (case insensitive) of the action is provided in the ActionID parameter.

ActionParams contains the value of a single parameter, or a list of multiple parameters for the action in the form of PARAM1=VALUE1;PARAM2=VALUE2;....

extract_async_data Method

Extracts user data from the DC signing service response.

Syntax

def extract_async_data(async_reply: str) -> str: ...

Remarks

Call this method before finalizing the asynchronous signing process to extract the data passed to the ExternalCrypto.Data property on the pre-signing stage.

The Data parameter can be used to pass some state or document identifier along with the signing request from the pre-signing to the completion async stage.

get_inner_xml Method

Get the inner XML content of the selected XML element.

Syntax

def get_inner_xml(xpath: str) -> str: ...

Remarks

Call this method to get the inner XML content of the selected XML element.

get_outer_xml Method

Get the outer XML content of the selected XML element.

Syntax

def get_outer_xml(xpath: str) -> str: ...

Remarks

Call this method to get the outer XML content of the selected XML element.

get_text_content Method

Get the text content of the selected XML element.

Syntax

def get_text_content(xpath: str) -> str: ...

Remarks

Call this method to get the text content of the selected XML element.

reset Method

Resets the class settings.

Syntax

def reset() -> None: ...

Remarks

reset is a generic method available in every class.

set_inner_xml Method

Set the inner XML content of the selected XML element.

Syntax

def set_inner_xml(xpath: str, value: str) -> None: ...

Remarks

Call this method to set the inner XML content of the selected XML element.

set_text_content Method

Set the text content of the selected XML element.

Syntax

def set_text_content(xpath: str, value: str) -> None: ...

Remarks

Call this method to set the text content of the selected XML element.

sign Method

Signs the SOAP message.

Syntax

def sign() -> None: ...

Remarks

Call this method to generate a signed SOAP message.

sign_async_begin Method

Initiates the asynchronous signing operation.

Syntax

def sign_async_begin() -> str: ...

Remarks

When using the DC framework, call this method to initiate the asynchronous signing process. Upon completion, a pre-signed copy of the document will be saved in output_file (or output_stream). Keep the pre-signed copy somewhere local, and pass the returned string ('the request state') to the DC processor for handling.

Upon receiving the response state from the DC processor, assign the path to the pre-signed copy to input_file (or input_stream), and call sign_async_end to finalize the signing.

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the signing_certificate property.

Use the ExternalCrypto.AsyncDocumentID property to supply a unique document ID to include in the request. This is helpful when creating batches of multiple async requests, as it allows you to pass the whole response batch to sign_async_end and expect it to recover the correct response from the batch automatically.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the sign_async_begin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the sign_async_end method.

sign_async_end Method

Completes the asynchronous signing operation.

Syntax

def sign_async_end(async_reply: str) -> None: ...

Remarks

When using the DC framework, call this method upon receiving the response state from the DC processor to complete the asynchronous signing process.

Before calling this method, assign the path to the pre-signed copy of the document obtained from the prior sign_async_begin call to input_file (or input_stream). The method will embed the signature into the pre-signed document, and save the complete signed document to output_file (or output_stream).

Note that depending on the signing method and DC configuration used, you may still need to provide the public part of the signing certificate via the signing_certificate property.

Use the ExternalCrypto.AsyncDocumentID parameter to pass a specific document ID if using batched AsyncReply. If used, it should match the value provided on the pre-signing (sign_async_begin) stage.

AsyncState is a message of the distributed cryptography (DC) protocol. The DC protocol is based on the exchange of async states between a DC client (an application that wants to sign a PDF, XML, or Office document) and a DC server (an application that controls access to the private key). An async state can carry one or more signing requests, comprised of document hashes, or one or more signatures produced over those hashes.

In a typical scenario you get a client-side async state from the sign_async_begin method. This state contains document hashes to be signed on the DC server side. You then send the async state to the DC server (often represented by the DCAuth class), which processes it and produces a matching signature state. The async state produced by the server is then passed to the sign_async_end method.

sign_external Method

Signs the document using an external signing facility.

Syntax

def sign_external() -> None: ...

Remarks

Call this method to delegate the low-level signing operation to an external, remote, or custom signing engine. This method is useful if the signature has to be made by a device accessible through a custom or non-standard signing interface.

When all preparations are done and hash is computed, the class fires on_external_sign event which allows to pass the hash value for signing.

on_error Event

Information about errors during signing.

Syntax

class SOAPQuickSignerErrorEventParams(object):
  @property
  def error_code() -> int: ...

  @property
  def description() -> str: ...

# In class SOAPQuickSigner:
@property
def on_error() -> Callable[[SOAPQuickSignerErrorEventParams], None]: ...
@on_error.setter
def on_error(event_hook: Callable[[SOAPQuickSignerErrorEventParams], None]) -> None: ...

Remarks

The event is fired in case of exceptional conditions during signing.

ErrorCode contains an error code and Description contains a textual description of the error. For a list of valid error codes and their descriptions, please refer to SOAP.

on_external_sign Event

Handles remote or external signing initiated by the SignExternal method or other source.

Syntax

class SOAPQuickSignerExternalSignEventParams(object):
  @property
  def operation_id() -> str: ...

  @property
  def hash_algorithm() -> str: ...

  @property
  def pars() -> str: ...

  @property
  def data() -> str: ...

  @property
  def signed_data() -> str: ...
  @signed_data.setter
  def signed_data(value) -> None: ...

# In class SOAPQuickSigner:
@property
def on_external_sign() -> Callable[[SOAPQuickSignerExternalSignEventParams], None]: ...
@on_external_sign.setter
def on_external_sign(event_hook: Callable[[SOAPQuickSignerExternalSignEventParams], None]) -> None: ...

Remarks

Assign a handler to this event if you need to delegate a low-level signing operation to an external, remote, or custom signing engine. Depending on the settings, the handler will receive a hashed or unhashed value to be signed.

The event handler must pass the value of Data to the signer, obtain the signature, and pass it back to the class via the SignedData parameter.

OperationId provides a comment about the operation and its origin. It depends on the exact class being used, and may be empty. HashAlgorithm specifies the hash algorithm being used for the operation, and Pars contains algorithm-dependent parameters.

The class uses base16 (hex) encoding for the Data, SignedData, and Pars parameters. If your signing engine uses a different input and output encoding, you may need to decode and/or encode the data before and/or after the signing.

A sample MD5 hash encoded in base16: a0dee2a0382afbb09120ffa7ccd8a152 - lower case base16 A0DEE2A0382AFBB09120FFA7CCD8A152 - upper case base16

A sample event handler that uses the .NET RSACryptoServiceProvider class may look like the following: signer.OnExternalSign += (s, e) => { var cert = new X509Certificate2("cert.pfx", "", X509KeyStorageFlags.Exportable); var key = (RSACryptoServiceProvider)cert.PrivateKey; var dataToSign = e.Data.FromBase16String(); var signedData = key.SignHash(dataToSign, "2.16.840.1.101.3.4.2.1"); e.SignedData = signedData.ToBase16String(); };

on_format_element Event

Reports the XML element that is currently being processed.

Syntax

class SOAPQuickSignerFormatElementEventParams(object):
  @property
  def start_tag_whitespace() -> str: ...
  @start_tag_whitespace.setter
  def start_tag_whitespace(value) -> None: ...

  @property
  def end_tag_whitespace() -> str: ...
  @end_tag_whitespace.setter
  def end_tag_whitespace(value) -> None: ...

  @property
  def level() -> int: ...

  @property
  def path() -> str: ...

  @property
  def has_child_elements() -> bool: ...

# In class SOAPQuickSigner:
@property
def on_format_element() -> Callable[[SOAPQuickSignerFormatElementEventParams], None]: ...
@on_format_element.setter
def on_format_element(event_hook: Callable[[SOAPQuickSignerFormatElementEventParams], None]) -> None: ...

Remarks

Path and Level specify the path to the XML element being processed and its nesting level, respectively.

HasChildElements specify if processed XML element has child elements.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

on_format_text Event

Reports XML text that is currently being processed.

Syntax

class SOAPQuickSignerFormatTextEventParams(object):
  @property
  def text() -> str: ...
  @text.setter
  def text(value) -> None: ...

  @property
  def text_type() -> int: ...

  @property
  def level() -> int: ...

  @property
  def path() -> str: ...

# In class SOAPQuickSigner:
@property
def on_format_text() -> Callable[[SOAPQuickSignerFormatTextEventParams], None]: ...
@on_format_text.setter
def on_format_text(event_hook: Callable[[SOAPQuickSignerFormatTextEventParams], None]) -> None: ...

Remarks

TextType parameter specifies the type of the XML text (normal or Base64-encoded) that is stored in the element; Path and Level specify the path to the XML element and its nesting level.

Among other purposes, this event may be used to add whitespace formatting before or after a particular element in the signature.

on_notification Event

This event notifies the application about an underlying control flow event.

Syntax

class SOAPQuickSignerNotificationEventParams(object):
  @property
  def event_id() -> str: ...

  @property
  def event_param() -> str: ...

# In class SOAPQuickSigner:
@property
def on_notification() -> Callable[[SOAPQuickSignerNotificationEventParams], None]: ...
@on_notification.setter
def on_notification(event_hook: Callable[[SOAPQuickSignerNotificationEventParams], None]) -> None: ...

Remarks

The class fires this event to let the application know about some event, occurrence, or milestone in the class. For example, it may fire to report completion of the document processing. The list of events being reported is not fixed, and may be flexibly extended over time.

The unique identifier of the event is provided in the EventID parameter. EventParam contains any parameters accompanying the occurrence. Depending on the type of the class, the exact action it is performing, or the document being processed, one or both may be omitted.

This class can fire this event with the following EventID values:

on_resolve_reference Event

Asks the application to resolve a reference.

Syntax

class SOAPQuickSignerResolveReferenceEventParams(object):
  @property
  def reference_index() -> int: ...

  @property
  def uri() -> str: ...

# In class SOAPQuickSigner:
@property
def on_resolve_reference() -> Callable[[SOAPQuickSignerResolveReferenceEventParams], None]: ...
@on_resolve_reference.setter
def on_resolve_reference(event_hook: Callable[[SOAPQuickSignerResolveReferenceEventParams], None]) -> None: ...

Remarks

This event is fired when the control could not automatically resolve a reference and requires custom treatment.

URI contains a reference to the data.

ReferenceIndex specifies the index of the reference to process.

Based on the reference's URI the event handler should set either TargetXMLElement or TargetData property of the reference.

SOAPQuickSigner Config Settings

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the config method.

SOAPQuickSigner Config Settings

Base Config Settings

SOAPQuickSigner Errors

SOAPQuickSigner Errors