SecureBlackbox 2020 macOS Edition

Questions / Feedback?

SOAPClient Configuration

The class accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the class, access to these internal properties is provided through the Config method.

HTTPClient Configuration Settings

AttachmentContentDescription:   Specifies attachment content description.

Specifies content description for the attachment.

AttachmentContentId:   Specifies attachment content Id.

Specifies content Id for the attachment.

AttachmentContentType:   Specifies attachment content type.

Specifies content type for the attachment.

AttachmentFilename:   Specifies attachment filename.

Specifies filename for the attachment.

CacheStreamOutput:   Tells the component whether to cache stream- and file-bound responses in the component.

Set this property to true to enable caching of potentially long responses obtained with GetFile and GetStream methods. If the response is cached, it will be available via OutputBytes and OutputString properties after the request is completed, but may occupy extra memory resources.

FaultActor[Index]:   Specifies who caused the fault.

Use this property to get the URI associated with the actor (SOAP node) that caused the fault. In RPC-style messaging, the actor is the URI of the Web service.

FaultCode[Index]:   Specifies the error code.

Use this property to get the standard code that provides more information about the fault. A set of code values is predefined by the SOAP specification. This set of fault code values can be extended by the application.

FaultCount:   The number of faults.

Returns the number of the faults obtained.

FaultDetail[Index]:   Contains application-specific error information.

Use this property to get the application-specific information, such as the exception that was thrown. This element can be an XML structure or plain text.

FaultString[Index]:   Specifies a human-readable description of fault.

Use this property to get the human-readable description of the error.

FaultXML[Index]:   Specifies the XML content of the fault.

Use this property to get the XML content of the fault.

ForceNTLMAuth:   Activates and enforces NTLM authentication.

Set this property to True to force NTLM (Windows Integrated) authentication.

IgnoreSystemTrust:   Whether trusted Windows Certificate Stores should be treated as trusted.

Specifies whether, during chain validation, the component should respect the trust to CA certificates as configured in the operating system. In Windows this effectively defines whether the component should trust the certificates residing in the Trusted Root Certification Authorities store.

If IgnoreSystemTrust is True, certificates residing in the trusted root store are treated as if they are known, rather than trusted. Only certificates provided via other means (such as TrustedCertificates property) are considered trusted.

IgnoreUnknownTransferEncodings:   All incoming responses with unknown transfer encodings are ignored if this property is true.

All incoming responses with unknown transfer encodings are ignored if this property is true.

MaxRedirections:   The maximum number of HTTP redirects.

Specifies the maximum number of HTTP redirects. Value 0 prevents any redirections, and -1 allows unlimited redirections.

PersistentAuthHeader:   Whether to resend NTLM negotiation on every request.

Specifies whether to resend NTLM negotiation on every request.

RelatedStartInfo:   Specifies Start-Info parameter.

Specifies additional information required for unpacking or processing of the content. It is optional Start-Info parameter of the Multipart/Related media type.

RelatedType:   Specifies media type/subtype.

Specifies media type/subtype of message's content. Use this property to override default media type. It is Type parameter of the Multipart/Related media type.

RequestCompressionGZip:   Ask server to use GZip compression.

Ask server to use GZip compression.

RequestCompressionLevel:   Ask server to use the specified compression level.

Ask server to use the specified compression level.

SendBufferSize:   Size of send buffer in bytes.

The size of blocks used to send data to the server.

SkipInputProcessing:   Whether to skip input processing.

Set this property to True to enforce the class to send input data as-is.

SkipOutputParsing:   Whether to skip output parsing.

Set this property to True to enforce the class to not to parse the output. In this case, SOAPResponseType property value will be either srtUnknown or srtBinary, and OperationResponse* and Fault* properties will not be set.

SOAPPrefix:   Specifies the signature prefix.

Specifies the prefix for the SOAPMessage elements.

Default value is "". In this case no prefix will be used.

Special values:

"#default" or ""indicates that the prefix will be omitted.
"#auto"indicates that the prefix will be auto-detected based on the parent nodes.

SuppressRedirectionContent:   Whether to suppress the redirection content.

If this property is set to True, the redirection content will be silently suppressed by the class. Otherwise the message containing a redirection code will be processed as usual, the Redirection event will be fired, and the data will be written to OutputString or OutputBytes.

TempPath:   Path for storing temporary files.

This setting specifies an absolute path to the location on disk where temporary files are stored.

TolerateMinorChainIssues:   Whether to tolerate minor chain issues.

TBD

Use100Continue:   Whether to use 100-continue for POST and PUT commands.

Set this property to True to use the 100-continue approach for POST and PUT commands. In this approach, prior to sending the request body, the client sends a request message asking the server whether it is willing to accept the request body. The request body is sent only if the server accepts it.

UseCompression:   Whether to use GZip compression.

Use this property to tell the server that it can transfer GZIPped data (if the server supports it).

UseMicrosoftCTL:   Enables or disables automatic use of Microsoft online certificate trust list.

Enable this property to make the chain validation module automatically look up missing CA certificates in the public Windows Update repository.

UseSOAPAction:   Whether to use SOAP Action.

Set this property to False to disable adding SOAPAction/action header field.

UseSystemCertificates:   Enables or disables the use of the system certificates.

Use this property to tell chain validation module automatically look up missing CA certificates in the system certificates. In many cases it is beneficial to switch this property on, as the operating system certificate configuration provides a representative trust framework.

Base Configuration Settings

CheckKeyIntegrityBeforeUse:   Enables or disable private key integrity check before use.

This global property enables or disables private key material check before each signing operation. This slows down performance a bit, but prevents a selection of attacks on RSA keys where keys with unknown origins are used.

You can switch this property off to improve performance if your project only uses known, good private keys.

CookieCaching:   Specifies whether a cookie cache should be used for HTTP(S) transports.

Set this property to enable or disable cookies caching for the class.

Supported values are:

offNo caching (default)
localLocal caching (supported for HTTPClient, RESTClient and SOAPClient only)
globalGlobal caching

Cookies:   Gets or sets local cookies for the class (supported for HTTPClient, RESTClient and SOAPClient only).

Use this property to get cookies from the internal cookie storage of the class and/or restore them back between application sessions.

DefDeriveKeyIterations:   Specifies the default key derivation algorithm iteration count.

This global property sets the default number of iterations for all supported key derivation algorithms. Note that you can provide the required number of iterations by using properties of the relevant key generation component; this global setting is used in scenarios where specific iteration count is not or cannot be provided.

EnableClientSideSSLFFDHE:   Enables or disables finite field DHE key exchange support in TLS clients.

This global property enables or disables support for finite field DHE key exchange methods in TLS clients. FF DHE is a slower algorithm if compared to EC DHE; enabling it may result in slower connections.

This setting only applies to sessions negotiated with TLS version 1.3.

GlobalCookies:   Gets or sets global cookies for all the HTTP transports.

Use this property to get cookies from the GLOBAL cookie storage or restore them back between application sessions. These cookies will be used by all the classes that have its CookieCaching property set to "global".

HttpUserAgent:   Specifies the user agent name to be used by all HTTP clients.

This global setting defines the User-Agent field of the HTTP request provides information about the software that initiates the request. This value will be used by all the HTTP clients including the ones used internally in other classes.

LogDestination:   Specifies the debug log destination.

Contains a comma-separated list of values that specifies where debug log should be dumped.

Supported values are:

fileFile
consoleConsole
systemlogSystem Log (supported for Android only)
debuggerDebugger (supported for VCL for Windows and .Net)

LogDetails:   Specifies the debug log details to dump.

Contains a comma-separated list of values that specifies which debug log details to dump.

Supported values are:

timeCurrent time
levelLevel
packagePackage name
moduleModule name
classClass name
methodMethod name
threadidThread Id
contenttypeContent type
contentContent
allAll details

LogFile:   Specifies the debug log filename.

Use this property to provide a path to the log file.

LogFilters:   Specifies the debug log filters.

Contains a comma-separated list of value pairs ("name:value") that describe filters.

Supported filter names are:

exclude-packageExclude a package specified in the value
exclude-moduleExclude a module specified in the value
exclude-classExclude a class specified in the value
exclude-methodExclude a method specified in the value
include-packageInclude a package specified in the value
include-moduleInclude a module specified in the value
include-classInclude a class specified in the value
include-methodInclude a method specified in the value

LogFlushMode:   Specifies the log flush mode.

Use this property to set the log flush mode. The following values are defined:

noneNo flush (caching only)
immediateImmediate flush (real-time logging)
maxcountFlush cached entries upon reaching LogMaxEventCount entries in the cache.

LogLevel:   Specifies the debug log level.

Use this property to provide the desired debug log level.

Supported values are:

noneNone (by default)
fatalSevere errors that cause premature termination.
errorOther runtime errors or unexpected conditions.
warningUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong".
infoInteresting runtime events (startup/shutdown).
debugDetailed information on flow of through the system.
traceMore detailed information.

LogMaxEventCount:   Specifies the maximum number of events to cache before further action is taken.

Use this property to specify the log event number threshold. This threshold may have different effects, depending on the rotation setting and/or the flush mode.

The default value of this setting is 100.

LogRotationMode:   Specifies the log rotation mode.

Use this property to set the log rotation mode. The following values are defined:

noneNo rotation
deleteolderDelete older entries from the cache upon reaching LogMaxEventCount
keepolderKeep older entries in the cache upon reaching LogMaxEventCount (newer entries are discarded)

MaxASN1BufferLength:   Specifies the maximal allowed length for ASN.1 primitive tag data.

This global property limits the maximal allowed length for ASN.1 tag data for non-content-carrying structures, such as certificates, CRLs, or timestamps. It does not affect structures that can carry content, such as CMS/CAdES messages. This is a security property aiming at preventing DoS attacks.

MaxASN1TreeDepth:   Specifies the maximal depth for processed ASN.1 trees.

This global property limits the maximal depth of ASN.1 trees that the component can handle without throwing an error. This is a security property aiming at preventing DoS attacks.

OCSPHashAlgorithm:   Specifies the hash algorithm to be used to identify certificates in OCSP requests.

This global setting defines the hash algorithm to use in OCSP requests during chain validation. Some OCSP responders can only use older algorithms, in which case setting this property to SHA1 may be helpful.

UseOwnDNSResolver:   Specifies whether the client components should use own DNS resolver.

Set this global property to false to force all the client components to use the DNS resolver provided by the target OS instead of using own one.

UseSharedSystemStorages:   Specifies whether the validation engine should use a global per-process copy of the system certificate stores.

Set this global property to false to make each validation run use its own copy of system certificate stores.

UseSystemOAEPAndPSS:   Enforces or disables the use of system-driven RSA OAEP and PSS computations.

This global setting defines who is responsible for performing RSA-OAEP and RSA-PSS computations where the private key is stored in a Windows system store and is exportable. If set to true, SBB will delegate the computations to Windows via a CryptoAPI call. Otherwise, it will export the key material and perform the computations using its own OAEP/PSS implementation.

This setting only applies to certificates originating from a Windows system store.

UseSystemRandom:   Enables or disables the use of the OS PRNG.

Use this global property to enable or disable the use of operating system-driven pseudorandom number generation.

Copyright (c) 2022 /n software inc. - All rights reserved.
SecureBlackbox 2020 macOS Edition - Version 20.0 [Build 8165]